1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 #include "msm8916-pm8916.dtsi" 3 #include "msm8916-pm8916.dtsi"
4 #include "msm8916-modem-qdsp6.dtsi" <<
5 <<
6 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/irq 6 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
10 #include <dt-bindings/sound/apq8016-lpass.h> <<
11 8
12 / { 9 / {
13 aliases { 10 aliases {
14 mmc0 = &sdhc_1; /* eMMC */ 11 mmc0 = &sdhc_1; /* eMMC */
15 mmc1 = &sdhc_2; /* SD card */ 12 mmc1 = &sdhc_2; /* SD card */
16 serial0 = &blsp_uart2; 13 serial0 = &blsp_uart2;
17 }; 14 };
18 15
19 chosen { 16 chosen {
20 stdout-path = "serial0"; 17 stdout-path = "serial0";
21 }; 18 };
22 19
23 reserved-memory { 20 reserved-memory {
24 /* Additional memory used by S 21 /* Additional memory used by Samsung firmware modifications */
25 tz-apps@85500000 { 22 tz-apps@85500000 {
26 reg = <0x0 0x85500000 23 reg = <0x0 0x85500000 0x0 0xb00000>;
27 no-map; 24 no-map;
28 }; 25 };
29 }; 26 };
30 27
31 battery: battery { <<
32 compatible = "simple-battery"; <<
33 precharge-current-microamp = < <<
34 precharge-upper-limit-microvol <<
35 }; <<
36 <<
37 clk_pwm: pwm { 28 clk_pwm: pwm {
38 compatible = "clk-pwm"; 29 compatible = "clk-pwm";
39 #pwm-cells = <2>; 30 #pwm-cells = <2>;
40 31
41 clocks = <&gcc GCC_GP2_CLK>; 32 clocks = <&gcc GCC_GP2_CLK>;
42 33
43 pinctrl-names = "default"; 34 pinctrl-names = "default";
44 pinctrl-0 = <&motor_pwm_defaul 35 pinctrl-0 = <&motor_pwm_default>;
45 status = "disabled"; 36 status = "disabled";
46 }; 37 };
47 38
48 gpio-keys { 39 gpio-keys {
49 compatible = "gpio-keys"; 40 compatible = "gpio-keys";
50 41
51 pinctrl-names = "default"; 42 pinctrl-names = "default";
52 pinctrl-0 = <&gpio_keys_defaul 43 pinctrl-0 = <&gpio_keys_default>;
53 44
54 label = "GPIO Buttons"; 45 label = "GPIO Buttons";
55 46
56 button-volume-up { 47 button-volume-up {
57 label = "Volume Up"; 48 label = "Volume Up";
58 gpios = <&tlmm 107 GPI 49 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
59 linux,code = <KEY_VOLU 50 linux,code = <KEY_VOLUMEUP>;
60 }; 51 };
61 52
62 button-home { 53 button-home {
63 label = "Home"; 54 label = "Home";
64 gpios = <&tlmm 109 GPI 55 gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_HOME 56 linux,code = <KEY_HOMEPAGE>;
66 }; 57 };
67 }; 58 };
68 59
69 gpio-hall-sensor { 60 gpio-hall-sensor {
70 compatible = "gpio-keys"; 61 compatible = "gpio-keys";
71 62
72 pinctrl-names = "default"; 63 pinctrl-names = "default";
73 pinctrl-0 = <&gpio_hall_sensor 64 pinctrl-0 = <&gpio_hall_sensor_default>;
74 65
75 label = "GPIO Hall Effect Sens 66 label = "GPIO Hall Effect Sensor";
76 67
77 event-hall-sensor { 68 event-hall-sensor {
78 label = "Hall Effect S 69 label = "Hall Effect Sensor";
79 gpios = <&tlmm 52 GPIO 70 gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
80 linux,input-type = <EV 71 linux,input-type = <EV_SW>;
81 linux,code = <SW_LID>; 72 linux,code = <SW_LID>;
82 linux,can-disable; 73 linux,can-disable;
83 }; 74 };
84 }; 75 };
85 76
86 /* 77 /*
87 * NOTE: A5 connects GPIO 76 to a regl 78 * NOTE: A5 connects GPIO 76 to a reglator powering the motor
88 * driver IC but A3 connects the same 79 * driver IC but A3 connects the same signal to an ENABLE pin of
89 * the driver. 80 * the driver.
90 */ 81 */
91 reg_motor_vdd: regulator-motor-vdd { 82 reg_motor_vdd: regulator-motor-vdd {
92 compatible = "regulator-fixed" 83 compatible = "regulator-fixed";
93 regulator-name = "motor_vdd"; 84 regulator-name = "motor_vdd";
94 regulator-min-microvolt = <300 85 regulator-min-microvolt = <3000000>;
95 regulator-max-microvolt = <300 86 regulator-max-microvolt = <3000000>;
96 87
97 gpio = <&tlmm 76 GPIO_ACTIVE_H 88 gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
98 enable-active-high; 89 enable-active-high;
99 90
100 pinctrl-names = "default"; 91 pinctrl-names = "default";
101 pinctrl-0 = <&motor_en_default 92 pinctrl-0 = <&motor_en_default>;
102 }; 93 };
103 94
104 reg_vdd_tsp_a: regulator-vdd-tsp-a { 95 reg_vdd_tsp_a: regulator-vdd-tsp-a {
105 compatible = "regulator-fixed" 96 compatible = "regulator-fixed";
106 regulator-name = "vdd_tsp_a"; 97 regulator-name = "vdd_tsp_a";
107 regulator-min-microvolt = <330 98 regulator-min-microvolt = <3300000>;
108 regulator-max-microvolt = <330 99 regulator-max-microvolt = <3300000>;
109 100
110 gpio = <&tlmm 73 GPIO_ACTIVE_H 101 gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
111 enable-active-high; 102 enable-active-high;
112 103
113 pinctrl-names = "default"; 104 pinctrl-names = "default";
114 pinctrl-0 = <&tsp_en_default>; 105 pinctrl-0 = <&tsp_en_default>;
115 }; 106 };
116 107
117 i2c-muic { 108 i2c-muic {
118 compatible = "i2c-gpio"; 109 compatible = "i2c-gpio";
119 sda-gpios = <&tlmm 105 (GPIO_A 110 sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
120 scl-gpios = <&tlmm 106 (GPIO_A 111 scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
121 112
122 pinctrl-names = "default"; 113 pinctrl-names = "default";
123 pinctrl-0 = <&muic_i2c_default 114 pinctrl-0 = <&muic_i2c_default>;
124 115
125 #address-cells = <1>; 116 #address-cells = <1>;
126 #size-cells = <0>; 117 #size-cells = <0>;
127 118
128 muic: extcon@25 { 119 muic: extcon@25 {
129 compatible = "siliconm 120 compatible = "siliconmitus,sm5502-muic";
130 121
131 reg = <0x25>; 122 reg = <0x25>;
132 interrupt-parent = <&t 123 interrupt-parent = <&tlmm>;
133 interrupts = <12 IRQ_T 124 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
134 125
135 pinctrl-names = "defau 126 pinctrl-names = "default";
136 pinctrl-0 = <&muic_int 127 pinctrl-0 = <&muic_int_default>;
137 <<
138 usb_con: connector { <<
139 compatible = " <<
140 label = "micro <<
141 type = "micro" <<
142 }; <<
143 }; 128 };
144 }; 129 };
145 130
146 i2c-tkey { 131 i2c-tkey {
147 compatible = "i2c-gpio"; 132 compatible = "i2c-gpio";
148 sda-gpios = <&tlmm 16 (GPIO_AC 133 sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
149 scl-gpios = <&tlmm 17 (GPIO_AC 134 scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
150 135
151 pinctrl-names = "default"; 136 pinctrl-names = "default";
152 pinctrl-0 = <&tkey_i2c_default 137 pinctrl-0 = <&tkey_i2c_default>;
153 138
154 #address-cells = <1>; 139 #address-cells = <1>;
155 #size-cells = <0>; 140 #size-cells = <0>;
156 141
157 touchkey: touchkey@20 { 142 touchkey: touchkey@20 {
158 /* Note: Actually an A 143 /* Note: Actually an ABOV MCU that implements same interface */
159 compatible = "corerive 144 compatible = "coreriver,tc360-touchkey";
160 reg = <0x20>; 145 reg = <0x20>;
161 146
162 interrupt-parent = <&t 147 interrupt-parent = <&tlmm>;
163 interrupts = <98 IRQ_T 148 interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
164 149
165 /* vcc/vdd-supply are 150 /* vcc/vdd-supply are board-specific */
166 vddio-supply = <&pm891 151 vddio-supply = <&pm8916_l6>;
167 152
168 linux,keycodes = <KEY_ 153 linux,keycodes = <KEY_APPSELECT KEY_BACK>;
169 154
170 pinctrl-names = "defau 155 pinctrl-names = "default";
171 pinctrl-0 = <&tkey_def 156 pinctrl-0 = <&tkey_default>;
172 }; 157 };
173 }; 158 };
174 159
175 i2c-nfc { 160 i2c-nfc {
176 compatible = "i2c-gpio"; 161 compatible = "i2c-gpio";
177 sda-gpios = <&tlmm 0 (GPIO_ACT 162 sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
178 scl-gpios = <&tlmm 1 (GPIO_ACT 163 scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
179 164
180 pinctrl-names = "default"; 165 pinctrl-names = "default";
181 pinctrl-0 = <&nfc_i2c_default> 166 pinctrl-0 = <&nfc_i2c_default>;
182 167
183 #address-cells = <1>; 168 #address-cells = <1>;
184 #size-cells = <0>; 169 #size-cells = <0>;
185 170
186 nfc@27 { 171 nfc@27 {
187 compatible = "samsung, 172 compatible = "samsung,s3fwrn5-i2c";
188 reg = <0x27>; 173 reg = <0x27>;
189 174
190 interrupt-parent = <&t 175 interrupt-parent = <&tlmm>;
191 interrupts = <21 IRQ_T 176 interrupts = <21 IRQ_TYPE_EDGE_RISING>;
192 177
193 en-gpios = <&tlmm 20 G 178 en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
194 wake-gpios = <&tlmm 49 179 wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
195 180
196 clocks = <&rpmcc RPM_S 181 clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
197 182
198 pinctrl-names = "defau 183 pinctrl-names = "default";
199 pinctrl-0 = <&nfc_defa 184 pinctrl-0 = <&nfc_default &nfc_clk_req>;
200 }; 185 };
201 }; 186 };
202 187
203 vibrator: vibrator { 188 vibrator: vibrator {
204 compatible = "pwm-vibrator"; 189 compatible = "pwm-vibrator";
205 190
206 pwms = <&clk_pwm 0 100000>; 191 pwms = <&clk_pwm 0 100000>;
207 pwm-names = "enable"; 192 pwm-names = "enable";
208 193
209 vcc-supply = <®_motor_vdd>; 194 vcc-supply = <®_motor_vdd>;
210 status = "disabled"; 195 status = "disabled";
211 }; 196 };
212 }; 197 };
213 198
214 &blsp_i2c1 { <<
215 status = "okay"; <<
216 <<
217 speaker_codec: audio-codec@34 { <<
218 compatible = "nxp,tfa9895"; <<
219 reg = <0x34>; <<
220 vddd-supply = <&pm8916_l5>; <<
221 sound-name-prefix = "Speaker"; <<
222 #sound-dai-cells = <0>; <<
223 }; <<
224 }; <<
225 <<
226 &blsp_i2c2 { 199 &blsp_i2c2 {
227 status = "okay"; 200 status = "okay";
228 201
229 accelerometer: accelerometer@10 { 202 accelerometer: accelerometer@10 {
230 compatible = "bosch,bmc150_acc 203 compatible = "bosch,bmc150_accel";
231 reg = <0x10>; 204 reg = <0x10>;
232 interrupt-parent = <&tlmm>; 205 interrupt-parent = <&tlmm>;
233 interrupts = <115 IRQ_TYPE_EDG 206 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
234 207
235 vdd-supply = <&pm8916_l17>; 208 vdd-supply = <&pm8916_l17>;
236 vddio-supply = <&pm8916_l5>; 209 vddio-supply = <&pm8916_l5>;
237 210
238 pinctrl-names = "default"; 211 pinctrl-names = "default";
239 pinctrl-0 = <&accel_int_defaul 212 pinctrl-0 = <&accel_int_default>;
240 }; 213 };
241 214
242 magnetometer@12 { 215 magnetometer@12 {
243 compatible = "bosch,bmc150_mag 216 compatible = "bosch,bmc150_magn";
244 reg = <0x12>; 217 reg = <0x12>;
245 218
246 vdd-supply = <&pm8916_l17>; 219 vdd-supply = <&pm8916_l17>;
247 vddio-supply = <&pm8916_l5>; 220 vddio-supply = <&pm8916_l5>;
248 }; 221 };
249 }; 222 };
250 223
251 &blsp_i2c4 { 224 &blsp_i2c4 {
252 status = "okay"; 225 status = "okay";
253 226
254 fuel-gauge@35 { !! 227 battery@35 {
255 compatible = "richtek,rt5033-b 228 compatible = "richtek,rt5033-battery";
256 reg = <0x35>; 229 reg = <0x35>;
257 interrupt-parent = <&tlmm>; 230 interrupt-parent = <&tlmm>;
258 interrupts = <121 IRQ_TYPE_EDG 231 interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
259 232
260 pinctrl-names = "default"; 233 pinctrl-names = "default";
261 pinctrl-0 = <&fg_alert_default 234 pinctrl-0 = <&fg_alert_default>;
262 <<
263 power-supplies = <&charger>; <<
264 }; <<
265 }; <<
266 <<
267 &blsp_i2c6 { <<
268 status = "okay"; <<
269 <<
270 pmic@34 { <<
271 compatible = "richtek,rt5033"; <<
272 reg = <0x34>; <<
273 <<
274 interrupts-extended = <&tlmm 6 <<
275 <<
276 pinctrl-0 = <&pmic_int_default <<
277 pinctrl-names = "default"; <<
278 <<
279 regulators { <<
280 rt5033_reg_safe_ldo: S <<
281 regulator-min- <<
282 regulator-max- <<
283 regulator-alwa <<
284 }; <<
285 <<
286 /* <<
287 * Needed for camera, <<
288 * Define empty nodes <<
289 * regulators. <<
290 */ <<
291 LDO {}; <<
292 BUCK {}; <<
293 }; <<
294 <<
295 charger: charger { <<
296 compatible = "richtek, <<
297 monitored-battery = <& <<
298 richtek,usb-connector <<
299 }; <<
300 }; 235 };
301 }; 236 };
302 237
303 &blsp_uart2 { 238 &blsp_uart2 {
304 status = "okay"; 239 status = "okay";
305 }; 240 };
306 241
307 &gpu { 242 &gpu {
308 status = "okay"; 243 status = "okay";
309 }; 244 };
310 245
311 /* <<
312 * For some reason the speaker amplifier is co <<
313 * (MI2S_2_D1) instead of the first (MI2S_2_D0 <<
314 * device tree, otherwise audio will seemingly <<
315 * but the speaker stays silent. <<
316 * <<
317 * When routing audio via QDSP6 (the default) <<
318 * the definitions from &q6afedai are used. Wh <<
319 * be alternatively routed directly to the LPA <<
320 * The definitions for &lpass are here for com <<
321 * setup with minor changes to the DT (either <<
322 */ <<
323 &lpass { <<
324 dai-link@3 { <<
325 reg = <MI2S_QUATERNARY>; <<
326 qcom,playback-sd-lines = <1>; <<
327 }; <<
328 }; <<
329 <<
330 &mdss { 246 &mdss {
331 status = "okay"; 247 status = "okay";
332 }; 248 };
333 249
334 &mdss_dsi0 { 250 &mdss_dsi0 {
335 pinctrl-names = "default", "sleep"; 251 pinctrl-names = "default", "sleep";
336 pinctrl-0 = <&mdss_default>; 252 pinctrl-0 = <&mdss_default>;
337 pinctrl-1 = <&mdss_sleep>; 253 pinctrl-1 = <&mdss_sleep>;
338 }; 254 };
339 255
340 &mpss_mem { <<
341 reg = <0x0 0x86800000 0x0 0x5400000>; <<
342 }; <<
343 <<
344 &pm8916_resin { 256 &pm8916_resin {
345 status = "okay"; 257 status = "okay";
346 linux,code = <KEY_VOLUMEDOWN>; 258 linux,code = <KEY_VOLUMEDOWN>;
347 }; 259 };
348 260
349 &pm8916_rpm_regulators { 261 &pm8916_rpm_regulators {
350 pm8916_l17: l17 { 262 pm8916_l17: l17 {
351 regulator-min-microvolt = <285 263 regulator-min-microvolt = <2850000>;
352 regulator-max-microvolt = <285 264 regulator-max-microvolt = <2850000>;
353 }; 265 };
354 }; 266 };
355 267
356 &q6afedai { <<
357 dai@22 { <<
358 reg = <QUATERNARY_MI2S_RX>; <<
359 qcom,sd-lines = <1>; <<
360 }; <<
361 }; <<
362 <<
363 &sdhc_1 { 268 &sdhc_1 {
364 status = "okay"; 269 status = "okay";
365 }; 270 };
366 271
367 &sdhc_2 { 272 &sdhc_2 {
368 status = "okay"; 273 status = "okay";
369 274
370 pinctrl-names = "default", "sleep"; 275 pinctrl-names = "default", "sleep";
371 pinctrl-0 = <&sdc2_default &sdc2_cd_de 276 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
372 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa 277 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
373 278
374 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 279 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
375 }; 280 };
376 281
377 &sound { <<
378 model = "samsung-a2015"; <<
379 audio-routing = <<
380 "AMIC1", "MIC BIAS External1", <<
381 "AMIC2", "MIC BIAS Internal2", <<
382 "AMIC3", "MIC BIAS External1"; <<
383 <<
384 pinctrl-0 = <&cdc_pdm_default &sec_mi2 <<
385 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_ <<
386 pinctrl-names = "default", "sleep"; <<
387 <<
388 sound_link_backend2: backend2-dai-link <<
389 link-name = "Quaternary MI2S"; <<
390 <<
391 cpu { <<
392 sound-dai = <&q6afedai <<
393 }; <<
394 platform { <<
395 sound-dai = <&q6routin <<
396 }; <<
397 codec { <<
398 sound-dai = <&speaker_ <<
399 }; <<
400 }; <<
401 }; <<
402 <<
403 &usb { 282 &usb {
404 status = "okay"; 283 status = "okay";
405 extcon = <&muic>, <&muic>; 284 extcon = <&muic>, <&muic>;
406 }; 285 };
407 286
408 &usb_hs_phy { 287 &usb_hs_phy {
409 extcon = <&muic>; 288 extcon = <&muic>;
410 }; 289 };
411 290
412 &venus { 291 &venus {
413 status = "okay"; 292 status = "okay";
414 }; 293 };
415 294
416 &venus_mem { 295 &venus_mem {
417 status = "okay"; 296 status = "okay";
418 }; 297 };
419 298
420 &tlmm { 299 &tlmm {
421 accel_int_default: accel-int-default-s 300 accel_int_default: accel-int-default-state {
422 pins = "gpio115"; 301 pins = "gpio115";
423 function = "gpio"; 302 function = "gpio";
424 303
425 drive-strength = <2>; 304 drive-strength = <2>;
426 bias-disable; 305 bias-disable;
427 }; 306 };
428 307
429 fg_alert_default: fg-alert-default-sta 308 fg_alert_default: fg-alert-default-state {
430 pins = "gpio121"; 309 pins = "gpio121";
431 function = "gpio"; 310 function = "gpio";
432 311
433 drive-strength = <2>; 312 drive-strength = <2>;
434 bias-disable; 313 bias-disable;
435 }; 314 };
436 315
437 gpio_keys_default: gpio-keys-default-s 316 gpio_keys_default: gpio-keys-default-state {
438 pins = "gpio107", "gpio109"; 317 pins = "gpio107", "gpio109";
439 function = "gpio"; 318 function = "gpio";
440 319
441 drive-strength = <2>; 320 drive-strength = <2>;
442 bias-pull-up; 321 bias-pull-up;
443 }; 322 };
444 323
445 gpio_hall_sensor_default: gpio-hall-se 324 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
446 pins = "gpio52"; 325 pins = "gpio52";
447 function = "gpio"; 326 function = "gpio";
448 327
449 drive-strength = <2>; 328 drive-strength = <2>;
450 bias-disable; 329 bias-disable;
451 }; 330 };
452 331
453 mdss_default: mdss-default-state { 332 mdss_default: mdss-default-state {
454 pins = "gpio25"; 333 pins = "gpio25";
455 function = "gpio"; 334 function = "gpio";
456 335
457 drive-strength = <8>; 336 drive-strength = <8>;
458 bias-disable; 337 bias-disable;
459 }; 338 };
460 mdss_sleep: mdss-sleep-state { 339 mdss_sleep: mdss-sleep-state {
461 pins = "gpio25"; 340 pins = "gpio25";
462 function = "gpio"; 341 function = "gpio";
463 342
464 drive-strength = <2>; 343 drive-strength = <2>;
465 bias-pull-down; 344 bias-pull-down;
466 }; 345 };
467 346
468 motor_en_default: motor-en-default-sta 347 motor_en_default: motor-en-default-state {
469 pins = "gpio76"; 348 pins = "gpio76";
470 function = "gpio"; 349 function = "gpio";
471 350
472 drive-strength = <2>; 351 drive-strength = <2>;
473 bias-disable; 352 bias-disable;
474 }; 353 };
475 354
476 motor_pwm_default: motor-pwm-default-s 355 motor_pwm_default: motor-pwm-default-state {
477 pins = "gpio50"; 356 pins = "gpio50";
478 function = "gcc_gp2_clk_a"; 357 function = "gcc_gp2_clk_a";
479 }; 358 };
480 359
481 muic_i2c_default: muic-i2c-default-sta 360 muic_i2c_default: muic-i2c-default-state {
482 pins = "gpio105", "gpio106"; 361 pins = "gpio105", "gpio106";
483 function = "gpio"; 362 function = "gpio";
484 363
485 drive-strength = <2>; 364 drive-strength = <2>;
486 bias-disable; 365 bias-disable;
487 }; 366 };
488 367
489 muic_int_default: muic-int-default-sta 368 muic_int_default: muic-int-default-state {
490 pins = "gpio12"; 369 pins = "gpio12";
491 function = "gpio"; 370 function = "gpio";
492 371
493 drive-strength = <2>; 372 drive-strength = <2>;
494 bias-disable; 373 bias-disable;
495 }; 374 };
496 375
497 nfc_default: nfc-default-state { 376 nfc_default: nfc-default-state {
498 nfc-pins { 377 nfc-pins {
499 pins = "gpio20", "gpio 378 pins = "gpio20", "gpio49";
500 function = "gpio"; 379 function = "gpio";
501 380
502 drive-strength = <2>; 381 drive-strength = <2>;
503 bias-disable; 382 bias-disable;
504 }; 383 };
505 384
506 irq-pins { 385 irq-pins {
507 pins = "gpio21"; 386 pins = "gpio21";
508 function = "gpio"; 387 function = "gpio";
509 388
510 drive-strength = <2>; 389 drive-strength = <2>;
511 bias-pull-down; 390 bias-pull-down;
512 }; 391 };
513 }; 392 };
514 393
515 nfc_i2c_default: nfc-i2c-default-state 394 nfc_i2c_default: nfc-i2c-default-state {
516 pins = "gpio0", "gpio1"; 395 pins = "gpio0", "gpio1";
517 function = "gpio"; 396 function = "gpio";
518 397
519 drive-strength = <2>; <<
520 bias-disable; <<
521 }; <<
522 <<
523 pmic_int_default: pmic-int-default-sta <<
524 pins = "gpio62"; <<
525 function = "gpio"; <<
526 drive-strength = <2>; 398 drive-strength = <2>;
527 bias-disable; 399 bias-disable;
528 }; 400 };
529 401
530 sdc2_cd_default: sdc2-cd-default-state 402 sdc2_cd_default: sdc2-cd-default-state {
531 pins = "gpio38"; 403 pins = "gpio38";
532 function = "gpio"; 404 function = "gpio";
533 drive-strength = <2>; 405 drive-strength = <2>;
534 bias-disable; 406 bias-disable;
535 }; 407 };
536 408
537 tkey_default: tkey-default-state { 409 tkey_default: tkey-default-state {
538 pins = "gpio98"; 410 pins = "gpio98";
539 function = "gpio"; 411 function = "gpio";
540 412
541 drive-strength = <2>; 413 drive-strength = <2>;
542 bias-disable; 414 bias-disable;
543 }; 415 };
544 416
545 tkey_i2c_default: tkey-i2c-default-sta 417 tkey_i2c_default: tkey-i2c-default-state {
546 pins = "gpio16", "gpio17"; 418 pins = "gpio16", "gpio17";
547 function = "gpio"; 419 function = "gpio";
548 420
549 drive-strength = <2>; 421 drive-strength = <2>;
550 bias-disable; 422 bias-disable;
551 }; 423 };
552 424
553 tsp_en_default: tsp-en-default-state { 425 tsp_en_default: tsp-en-default-state {
554 pins = "gpio73"; 426 pins = "gpio73";
555 function = "gpio"; 427 function = "gpio";
556 428
557 drive-strength = <2>; 429 drive-strength = <2>;
558 bias-disable; 430 bias-disable;
559 }; 431 };
560 432
561 ts_int_default: ts-int-default-state { 433 ts_int_default: ts-int-default-state {
562 pins = "gpio13"; 434 pins = "gpio13";
563 function = "gpio"; 435 function = "gpio";
564 436
565 drive-strength = <2>; 437 drive-strength = <2>;
566 bias-disable; 438 bias-disable;
567 }; 439 };
568 }; 440 };
569 441
570 &pm8916_gpios { 442 &pm8916_gpios {
571 nfc_clk_req: nfc-clk-req-state { 443 nfc_clk_req: nfc-clk-req-state {
572 pins = "gpio2"; 444 pins = "gpio2";
573 function = "func1"; 445 function = "func1";
574 446
575 input-enable; 447 input-enable;
576 bias-disable; 448 bias-disable;
577 power-source = <PM8916_GPIO_L2 449 power-source = <PM8916_GPIO_L2>;
578 }; 450 };
579 }; 451 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.