1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8916-samsung-a2015-common.dtsi" 5 #include "msm8916-samsung-a2015-common.dtsi"
6 6
7 / { 7 / {
8 model = "Samsung Galaxy A3U (EUR)"; 8 model = "Samsung Galaxy A3U (EUR)";
9 compatible = "samsung,a3u-eur", "qcom, 9 compatible = "samsung,a3u-eur", "qcom,msm8916";
10 chassis-type = "handset"; <<
11 <<
12 reg_panel_vdd3: regulator-panel-vdd3 { <<
13 compatible = "regulator-fixed" <<
14 regulator-name = "panel_vdd3"; <<
15 regulator-min-microvolt = <180 <<
16 regulator-max-microvolt = <180 <<
17 <<
18 gpio = <&tlmm 9 GPIO_ACTIVE_HI <<
19 enable-active-high; <<
20 <<
21 pinctrl-names = "default"; <<
22 pinctrl-0 = <&panel_vdd3_defau <<
23 }; <<
24 <<
25 reg_touch_key: regulator-touch-key { <<
26 compatible = "regulator-fixed" <<
27 regulator-name = "touch_key"; <<
28 regulator-min-microvolt = <280 <<
29 regulator-max-microvolt = <280 <<
30 <<
31 gpio = <&tlmm 86 GPIO_ACTIVE_H <<
32 enable-active-high; <<
33 <<
34 pinctrl-names = "default"; <<
35 pinctrl-0 = <&tkey_en_default> <<
36 }; <<
37 <<
38 reg_key_led: regulator-key-led { <<
39 compatible = "regulator-fixed" <<
40 regulator-name = "key_led"; <<
41 regulator-min-microvolt = <330 <<
42 regulator-max-microvolt = <330 <<
43 <<
44 gpio = <&tlmm 60 GPIO_ACTIVE_H <<
45 enable-active-high; <<
46 <<
47 pinctrl-names = "default"; <<
48 pinctrl-0 = <&tkey_led_en_defa <<
49 }; <<
50 }; <<
51 <<
52 &accelerometer { <<
53 mount-matrix = "0", "1", "0", <<
54 "1", "0", "0", <<
55 "0", "0", "1"; <<
56 }; <<
57 <<
58 &battery { <<
59 charge-term-current-microamp = <150000 <<
60 constant-charge-current-max-microamp = <<
61 constant-charge-voltage-max-microvolt <<
62 }; <<
63 <<
64 &blsp_i2c5 { <<
65 status = "okay"; <<
66 <<
67 touchscreen@20 { <<
68 compatible = "zinitix,bt541"; <<
69 <<
70 reg = <0x20>; <<
71 interrupt-parent = <&tlmm>; <<
72 interrupts = <13 IRQ_TYPE_EDGE <<
73 <<
74 touchscreen-size-x = <540>; <<
75 touchscreen-size-y = <960>; <<
76 <<
77 vcca-supply = <®_vdd_tsp_a> <<
78 vdd-supply = <&pm8916_l6>; <<
79 <<
80 pinctrl-names = "default"; <<
81 pinctrl-0 = <&ts_int_default>; <<
82 }; <<
83 }; <<
84 <<
85 &clk_pwm { <<
86 status = "okay"; <<
87 }; <<
88 <<
89 &mdss_dsi0 { <<
90 panel@0 { <<
91 reg = <0>; <<
92 <<
93 compatible = "samsung,s6e88a0- <<
94 <<
95 vdd3-supply = <®_panel_vdd3 <<
96 vci-supply = <&pm8916_l17>; <<
97 reset-gpios = <&tlmm 25 GPIO_A <<
98 <<
99 port { <<
100 panel_in: endpoint { <<
101 remote-endpoin <<
102 }; <<
103 }; <<
104 }; <<
105 }; <<
106 <<
107 &mdss_dsi0_out { <<
108 data-lanes = <0 1>; <<
109 remote-endpoint = <&panel_in>; <<
110 }; <<
111 <<
112 &touchkey { <<
113 vcc-supply = <®_touch_key>; <<
114 vdd-supply = <®_key_led>; <<
115 }; <<
116 <<
117 &vibrator { <<
118 status = "okay"; <<
119 }; <<
120 <<
121 &wcnss { <<
122 status = "okay"; <<
123 }; <<
124 <<
125 &wcnss_iris { <<
126 compatible = "qcom,wcn3620"; <<
127 }; <<
128 <<
129 &wcnss_mem { <<
130 status = "okay"; <<
131 }; <<
132 <<
133 &tlmm { <<
134 panel_vdd3_default: panel-vdd3-default <<
135 pins = "gpio9"; <<
136 function = "gpio"; <<
137 <<
138 drive-strength = <2>; <<
139 bias-disable; <<
140 }; <<
141 <<
142 tkey_en_default: tkey-en-default-state <<
143 pins = "gpio86"; <<
144 function = "gpio"; <<
145 <<
146 drive-strength = <2>; <<
147 bias-disable; <<
148 }; <<
149 <<
150 tkey_led_en_default: tkey-led-en-defau <<
151 pins = "gpio60"; <<
152 function = "gpio"; <<
153 <<
154 drive-strength = <2>; <<
155 bias-disable; <<
156 }; <<
157 }; 10 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.