1 // SPDX-License-Identifier: GPL-2.0-only
2
3 /dts-v1/;
4
5 #include "msm8939-pm8916.dtsi"
6
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/interrupt-controller/irq
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h
12 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
13
14 / {
15 model = "BQ Aquaris M5 (Longcheer L910
16 compatible = "longcheer,l9100", "qcom,
17 chassis-type = "handset";
18
19 aliases {
20 mmc0 = &sdhc_1; /* eMMC */
21 mmc1 = &sdhc_2; /* SD card */
22 serial0 = &blsp_uart2;
23 };
24
25 chosen {
26 stdout-path = "serial0";
27 };
28
29 gpio-hall-sensor {
30 compatible = "gpio-keys";
31
32 pinctrl-0 = <&gpio_hall_sensor
33 pinctrl-names = "default";
34
35 label = "GPIO Hall Effect Sens
36
37 event-hall-sensor {
38 label = "Hall Effect S
39 gpios = <&tlmm 20 GPIO
40 linux,input-type = <EV
41 linux,code = <SW_LID>;
42 linux,can-disable;
43 };
44 };
45
46 gpio-keys {
47 compatible = "gpio-keys";
48
49 pinctrl-0 = <&gpio_keys_defaul
50 pinctrl-names = "default";
51
52 label = "GPIO Buttons";
53
54 button-volume-up {
55 label = "Volume Up";
56 gpios = <&tlmm 107 GPI
57 linux,code = <KEY_VOLU
58 };
59 };
60
61 leds {
62 compatible = "gpio-leds";
63
64 led-0 {
65 gpios = <&tlmm 17 GPIO
66 color = <LED_COLOR_ID_
67 default-state = "off";
68 function = LED_FUNCTIO
69
70 pinctrl-0 = <&button_b
71 pinctrl-names = "defau
72 };
73 };
74
75 reg_ts_vdd: regulator-vdd-ts {
76 compatible = "regulator-fixed"
77 regulator-name = "regulator-vd
78 regulator-min-microvolt = <285
79 regulator-max-microvolt = <285
80
81 gpio = <&tlmm 78 GPIO_ACTIVE_H
82 enable-active-high;
83
84 pinctrl-0 = <&ts_vdd_default>;
85 pinctrl-names = "default";
86 };
87
88 backlight {
89 compatible = "pwm-backlight";
90 pwms = <&pm8916_pwm 0 100000>;
91 brightness-levels = <0 255>;
92 num-interpolated-steps = <255>
93 default-brightness-level = <12
94 enable-gpios = <&tlmm 98 GPIO_
95
96 pinctrl-0 = <&lcd_bl_en_defaul
97 pinctrl-names = "default";
98 };
99
100 flash-led-controller {
101 compatible = "ocs,ocp8110";
102 flash-gpios = <&tlmm 8 GPIO_AC
103 enable-gpios = <&tlmm 49 GPIO_
104
105 pinctrl-0 = <&camera_front_fla
106 pinctrl-names = "default";
107
108 led {
109 function = LED_FUNCTIO
110 color = <LED_COLOR_ID_
111 flash-max-timeout-us =
112 };
113 };
114
115 usb_id: usb-id {
116 compatible = "linux,extcon-usb
117 id-gpios = <&tlmm 110 GPIO_ACT
118 pinctrl-0 = <&usb_id_default &
119 pinctrl-names = "default";
120 };
121
122 };
123
124 &blsp_i2c2 {
125 status = "okay";
126
127 led-controller@30 {
128 compatible = "kinetic,ktd2026"
129 reg = <0x30>;
130 #address-cells = <1>;
131 #size-cells = <0>;
132
133 vin-supply = <&pm8916_l17>;
134 vio-supply = <&pm8916_l6>;
135
136 pinctrl-0 = <&status_led_defau
137 pinctrl-names = "default";
138
139 multi-led {
140 color = <LED_COLOR_ID_
141 function = LED_FUNCTIO
142
143 #address-cells = <1>;
144 #size-cells = <0>;
145
146 led@0 {
147 reg = <0>;
148 color = <LED_C
149 };
150
151 led@1 {
152 reg = <1>;
153 color = <LED_C
154 };
155
156 led@2 {
157 reg = <2>;
158 color = <LED_C
159 };
160 };
161 };
162
163 flash-led-controller@53 {
164 compatible = "silergy,sy7802";
165 reg = <0x53>;
166
167 enable-gpios = <&tlmm 16 GPIO_
168
169 pinctrl-0 = <&camera_rear_flas
170 pinctrl-names = "default";
171
172 #address-cells = <1>;
173 #size-cells = <0>;
174
175 led@0 {
176 reg = <0>;
177 function = LED_FUNCTIO
178 color = <LED_COLOR_ID_
179 led-sources = <0>, <1>
180 };
181 };
182 };
183
184 &blsp_i2c3 {
185 status = "okay";
186
187 magnetometer@d {
188 compatible = "asahi-kasei,ak09
189 reg = <0x0d>;
190
191 vdd-supply = <&pm8916_l17>;
192 vid-supply = <&pm8916_l6>;
193
194 reset-gpios = <&tlmm 68 GPIO_A
195
196 pinctrl-0 = <&mag_reset_defaul
197 pinctrl-names = "default";
198 };
199
200 light-sensor@23 {
201 compatible = "liteon,ltr559";
202 reg = <0x23>;
203 proximity-near-level = <75>;
204
205 vdd-supply = <&pm8916_l17>;
206 vddio-supply = <&pm8916_l5>;
207
208 interrupts-extended = <&tlmm 1
209
210 pinctrl-0 = <&light_int_defaul
211 pinctrl-names = "default";
212 };
213
214 imu@68 {
215 compatible = "bosch,bmi160";
216 reg = <0x68>;
217
218 vdd-supply = <&pm8916_l17>;
219 vddio-supply = <&pm8916_l6>;
220 };
221 };
222
223 &blsp_i2c5 {
224 status = "okay";
225
226 touchscreen@4a {
227 compatible = "atmel,maxtouch";
228 reg = <0x4a>;
229
230 interrupts-extended = <&tlmm 1
231
232 reset-gpios = <&tlmm 12 GPIO_A
233
234 vdda-supply = <&pm8916_l6>;
235 vdd-supply = <®_ts_vdd>;
236
237 pinctrl-0 = <&ts_int_reset_def
238 pinctrl-names = "default";
239
240 /* Keys listed from right to l
241 linux,keycodes = <KEY_APPSELEC
242 };
243 };
244
245 &blsp_uart2 {
246 status = "okay";
247 };
248
249 &pm8916_gpios {
250 status_led_default: status-led-default
251 pins = "gpio3";
252 function = PMIC_GPIO_FUNC_NORM
253 power-source = <PM8916_GPIO_VP
254 bias-disable;
255 output-high;
256 };
257 };
258
259 &pm8916_mpps {
260 pwm_out: mpp4-state {
261 pins = "mpp4";
262 function = "digital";
263 power-source = <PM8916_MPP_VPH
264 output-low;
265 qcom,dtest = <1>;
266 };
267 };
268
269 &pm8916_pwm {
270 pinctrl-0 = <&pwm_out>;
271 pinctrl-names = "default";
272 status = "okay";
273 };
274
275 &pm8916_resin {
276 linux,code = <KEY_VOLUMEDOWN>;
277 status = "okay";
278 };
279
280 &pm8916_rpm_regulators {
281 pm8916_l17: l17 {
282 regulator-min-microvolt = <285
283 regulator-max-microvolt = <285
284 };
285 };
286
287 &pm8916_vib {
288 status = "okay";
289 };
290
291 &sdhc_1 {
292 status = "okay";
293 };
294
295 &sdhc_2 {
296 pinctrl-0 = <&sdc2_default &sdc2_cd_de
297 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa
298 pinctrl-names = "default", "sleep";
299
300 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
301
302 status = "okay";
303 };
304
305 &usb {
306 extcon = <&usb_id>, <&usb_id>;
307 status = "okay";
308 };
309
310 &usb_hs_phy {
311 extcon = <&usb_id>;
312 };
313
314 &wcnss {
315 status = "okay";
316 };
317
318 &wcnss_iris {
319 compatible = "qcom,wcn3620";
320 };
321
322 &wcnss_mem {
323 status = "okay";
324 };
325
326 &tlmm {
327 button_backlight_default: button-backl
328 pins = "gpio17";
329 function = "gpio";
330 drive-strength = <2>;
331 bias-disable;
332 };
333
334 camera_front_flash_default: camera-fro
335 pins = "gpio8", "gpio49";
336 function = "gpio";
337 drive-strength = <2>;
338 bias-disable;
339 };
340
341 camera_rear_flash_default: camera-rear
342 pins = "gpio9", "gpio16", "gpi
343 function = "gpio";
344 drive-strength = <2>;
345 bias-disable;
346 };
347
348 gpio_hall_sensor_default: gpio-hall-se
349 pins = "gpio20";
350 function = "gpio";
351 drive-strength = <2>;
352 bias-disable;
353 };
354
355 gpio_keys_default: gpio-keys-default-s
356 pins = "gpio107";
357 function = "gpio";
358 drive-strength = <2>;
359 bias-pull-up;
360 };
361
362 lcd_bl_en_default: lcd-bl-en-default-s
363 pins = "gpio98";
364 function = "gpio";
365 drive-strength = <2>;
366 bias-disable;
367 };
368
369 light_int_default: light-int-default-s
370 pins = "gpio113";
371 function = "gpio";
372 drive-strength = <2>;
373 bias-disable;
374 };
375
376 mag_reset_default: mag-reset-default-s
377 pins = "gpio68";
378 function = "gpio";
379 drive-strength = <2>;
380 bias-disable;
381 };
382
383 sdc2_cd_default: sdc2-cd-default-state
384 pins = "gpio38";
385 function = "gpio";
386 drive-strength = <2>;
387 bias-disable;
388 };
389
390 ts_int_reset_default: ts-int-reset-def
391 pins = "gpio12", "gpio13";
392 function = "gpio";
393 drive-strength = <2>;
394 bias-disable;
395 };
396
397 ts_vdd_default: ts-vdd-default-state {
398 pins = "gpio78";
399 function = "gpio";
400 drive-strength = <2>;
401 bias-disable;
402 };
403
404 usb_id_default: usb-id-default-state {
405 pins = "gpio110";
406 function = "gpio";
407 drive-strength = <8>;
408 bias-pull-up;
409 };
410
411 usb_id_switch_default: usb-id-switch-d
412 pins = "gpio121";
413 function = "gpio";
414 drive-strength = <2>;
415 output-high;
416 };
417 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.