1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8939-pm8916.dtsi" 5 #include "msm8939-pm8916.dtsi"
6 6
7 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/interrupt-controller/irq 9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/leds/common.h> 10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> 12 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
13 13
14 / { 14 / {
15 model = "BQ Aquaris M5 (Longcheer L910 15 model = "BQ Aquaris M5 (Longcheer L9100)";
16 compatible = "longcheer,l9100", "qcom, 16 compatible = "longcheer,l9100", "qcom,msm8939";
17 chassis-type = "handset"; 17 chassis-type = "handset";
18 18
19 aliases { 19 aliases {
20 mmc0 = &sdhc_1; /* eMMC */ 20 mmc0 = &sdhc_1; /* eMMC */
21 mmc1 = &sdhc_2; /* SD card */ 21 mmc1 = &sdhc_2; /* SD card */
22 serial0 = &blsp_uart2; 22 serial0 = &blsp_uart2;
23 }; 23 };
24 24
25 chosen { 25 chosen {
26 stdout-path = "serial0"; 26 stdout-path = "serial0";
27 }; 27 };
28 28
29 gpio-hall-sensor { 29 gpio-hall-sensor {
30 compatible = "gpio-keys"; 30 compatible = "gpio-keys";
31 31
32 pinctrl-0 = <&gpio_hall_sensor 32 pinctrl-0 = <&gpio_hall_sensor_default>;
33 pinctrl-names = "default"; 33 pinctrl-names = "default";
34 34
35 label = "GPIO Hall Effect Sens 35 label = "GPIO Hall Effect Sensor";
36 36
37 event-hall-sensor { 37 event-hall-sensor {
38 label = "Hall Effect S 38 label = "Hall Effect Sensor";
39 gpios = <&tlmm 20 GPIO 39 gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
40 linux,input-type = <EV 40 linux,input-type = <EV_SW>;
41 linux,code = <SW_LID>; 41 linux,code = <SW_LID>;
42 linux,can-disable; 42 linux,can-disable;
43 }; 43 };
44 }; 44 };
45 45
46 gpio-keys { 46 gpio-keys {
47 compatible = "gpio-keys"; 47 compatible = "gpio-keys";
48 48
49 pinctrl-0 = <&gpio_keys_defaul 49 pinctrl-0 = <&gpio_keys_default>;
50 pinctrl-names = "default"; 50 pinctrl-names = "default";
51 51
52 label = "GPIO Buttons"; 52 label = "GPIO Buttons";
53 53
54 button-volume-up { 54 button-volume-up {
55 label = "Volume Up"; 55 label = "Volume Up";
56 gpios = <&tlmm 107 GPI 56 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_VOLU 57 linux,code = <KEY_VOLUMEUP>;
58 }; 58 };
59 }; 59 };
60 60
61 leds { 61 leds {
62 compatible = "gpio-leds"; 62 compatible = "gpio-leds";
63 63
64 led-0 { 64 led-0 {
65 gpios = <&tlmm 17 GPIO 65 gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
66 color = <LED_COLOR_ID_ 66 color = <LED_COLOR_ID_WHITE>;
67 default-state = "off"; 67 default-state = "off";
68 function = LED_FUNCTIO 68 function = LED_FUNCTION_KBD_BACKLIGHT;
69 69
70 pinctrl-0 = <&button_b 70 pinctrl-0 = <&button_backlight_default>;
71 pinctrl-names = "defau 71 pinctrl-names = "default";
72 }; 72 };
73 }; 73 };
74 74
75 reg_ts_vdd: regulator-vdd-ts { 75 reg_ts_vdd: regulator-vdd-ts {
76 compatible = "regulator-fixed" 76 compatible = "regulator-fixed";
77 regulator-name = "regulator-vd 77 regulator-name = "regulator-vdd-ts";
78 regulator-min-microvolt = <285 78 regulator-min-microvolt = <2850000>;
79 regulator-max-microvolt = <285 79 regulator-max-microvolt = <2850000>;
80 80
81 gpio = <&tlmm 78 GPIO_ACTIVE_H 81 gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
82 enable-active-high; 82 enable-active-high;
83 83
84 pinctrl-0 = <&ts_vdd_default>; 84 pinctrl-0 = <&ts_vdd_default>;
85 pinctrl-names = "default"; 85 pinctrl-names = "default";
86 }; 86 };
87 87
88 backlight { 88 backlight {
89 compatible = "pwm-backlight"; 89 compatible = "pwm-backlight";
90 pwms = <&pm8916_pwm 0 100000>; 90 pwms = <&pm8916_pwm 0 100000>;
91 brightness-levels = <0 255>; 91 brightness-levels = <0 255>;
92 num-interpolated-steps = <255> 92 num-interpolated-steps = <255>;
93 default-brightness-level = <12 93 default-brightness-level = <128>;
94 enable-gpios = <&tlmm 98 GPIO_ 94 enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
95 95
96 pinctrl-0 = <&lcd_bl_en_defaul 96 pinctrl-0 = <&lcd_bl_en_default>;
97 pinctrl-names = "default"; 97 pinctrl-names = "default";
98 }; 98 };
99 99
100 flash-led-controller { 100 flash-led-controller {
101 compatible = "ocs,ocp8110"; 101 compatible = "ocs,ocp8110";
102 flash-gpios = <&tlmm 8 GPIO_AC 102 flash-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
103 enable-gpios = <&tlmm 49 GPIO_ 103 enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
104 104
105 pinctrl-0 = <&camera_front_fla 105 pinctrl-0 = <&camera_front_flash_default>;
106 pinctrl-names = "default"; 106 pinctrl-names = "default";
107 107
108 led { 108 led {
109 function = LED_FUNCTIO 109 function = LED_FUNCTION_FLASH;
110 color = <LED_COLOR_ID_ 110 color = <LED_COLOR_ID_WHITE>;
111 flash-max-timeout-us = 111 flash-max-timeout-us = <250000>;
112 }; 112 };
113 }; 113 };
114 114
115 usb_id: usb-id { 115 usb_id: usb-id {
116 compatible = "linux,extcon-usb 116 compatible = "linux,extcon-usb-gpio";
117 id-gpios = <&tlmm 110 GPIO_ACT 117 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
118 pinctrl-0 = <&usb_id_default & 118 pinctrl-0 = <&usb_id_default &usb_id_switch_default>;
119 pinctrl-names = "default"; 119 pinctrl-names = "default";
120 }; 120 };
121 121
122 }; 122 };
123 123
124 &blsp_i2c2 { 124 &blsp_i2c2 {
125 status = "okay"; 125 status = "okay";
126 126
127 led-controller@30 { 127 led-controller@30 {
128 compatible = "kinetic,ktd2026" 128 compatible = "kinetic,ktd2026";
129 reg = <0x30>; 129 reg = <0x30>;
130 #address-cells = <1>; 130 #address-cells = <1>;
131 #size-cells = <0>; 131 #size-cells = <0>;
132 132
133 vin-supply = <&pm8916_l17>; 133 vin-supply = <&pm8916_l17>;
134 vio-supply = <&pm8916_l6>; 134 vio-supply = <&pm8916_l6>;
135 135
136 pinctrl-0 = <&status_led_defau 136 pinctrl-0 = <&status_led_default>;
137 pinctrl-names = "default"; 137 pinctrl-names = "default";
138 138
139 multi-led { 139 multi-led {
140 color = <LED_COLOR_ID_ 140 color = <LED_COLOR_ID_RGB>;
141 function = LED_FUNCTIO 141 function = LED_FUNCTION_STATUS;
142 142
143 #address-cells = <1>; 143 #address-cells = <1>;
144 #size-cells = <0>; 144 #size-cells = <0>;
145 145
146 led@0 { 146 led@0 {
147 reg = <0>; 147 reg = <0>;
148 color = <LED_C 148 color = <LED_COLOR_ID_RED>;
149 }; 149 };
150 150
151 led@1 { 151 led@1 {
152 reg = <1>; 152 reg = <1>;
153 color = <LED_C 153 color = <LED_COLOR_ID_GREEN>;
154 }; 154 };
155 155
156 led@2 { 156 led@2 {
157 reg = <2>; 157 reg = <2>;
158 color = <LED_C 158 color = <LED_COLOR_ID_BLUE>;
159 }; 159 };
160 }; 160 };
161 }; 161 };
162 162
163 flash-led-controller@53 { 163 flash-led-controller@53 {
164 compatible = "silergy,sy7802"; 164 compatible = "silergy,sy7802";
165 reg = <0x53>; 165 reg = <0x53>;
166 166
167 enable-gpios = <&tlmm 16 GPIO_ 167 enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
168 168
169 pinctrl-0 = <&camera_rear_flas 169 pinctrl-0 = <&camera_rear_flash_default>;
170 pinctrl-names = "default"; 170 pinctrl-names = "default";
171 171
172 #address-cells = <1>; 172 #address-cells = <1>;
173 #size-cells = <0>; 173 #size-cells = <0>;
174 174
175 led@0 { 175 led@0 {
176 reg = <0>; 176 reg = <0>;
177 function = LED_FUNCTIO 177 function = LED_FUNCTION_FLASH;
178 color = <LED_COLOR_ID_ 178 color = <LED_COLOR_ID_WHITE>;
179 led-sources = <0>, <1> 179 led-sources = <0>, <1>;
180 }; 180 };
181 }; 181 };
182 }; 182 };
183 183
184 &blsp_i2c3 { 184 &blsp_i2c3 {
185 status = "okay"; 185 status = "okay";
186 186
187 magnetometer@d { 187 magnetometer@d {
188 compatible = "asahi-kasei,ak09 188 compatible = "asahi-kasei,ak09911";
189 reg = <0x0d>; 189 reg = <0x0d>;
190 190
191 vdd-supply = <&pm8916_l17>; 191 vdd-supply = <&pm8916_l17>;
192 vid-supply = <&pm8916_l6>; 192 vid-supply = <&pm8916_l6>;
193 193
194 reset-gpios = <&tlmm 68 GPIO_A 194 reset-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
195 195
196 pinctrl-0 = <&mag_reset_defaul 196 pinctrl-0 = <&mag_reset_default>;
197 pinctrl-names = "default"; 197 pinctrl-names = "default";
198 }; 198 };
199 199
200 light-sensor@23 { 200 light-sensor@23 {
201 compatible = "liteon,ltr559"; 201 compatible = "liteon,ltr559";
202 reg = <0x23>; 202 reg = <0x23>;
203 proximity-near-level = <75>; 203 proximity-near-level = <75>;
204 204
205 vdd-supply = <&pm8916_l17>; 205 vdd-supply = <&pm8916_l17>;
206 vddio-supply = <&pm8916_l5>; 206 vddio-supply = <&pm8916_l5>;
207 207
208 interrupts-extended = <&tlmm 1 208 interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
209 209
210 pinctrl-0 = <&light_int_defaul 210 pinctrl-0 = <&light_int_default>;
211 pinctrl-names = "default"; 211 pinctrl-names = "default";
212 }; 212 };
213 213
214 imu@68 { 214 imu@68 {
215 compatible = "bosch,bmi160"; 215 compatible = "bosch,bmi160";
216 reg = <0x68>; 216 reg = <0x68>;
217 217
218 vdd-supply = <&pm8916_l17>; 218 vdd-supply = <&pm8916_l17>;
219 vddio-supply = <&pm8916_l6>; 219 vddio-supply = <&pm8916_l6>;
220 }; 220 };
221 }; 221 };
222 222
223 &blsp_i2c5 { 223 &blsp_i2c5 {
224 status = "okay"; 224 status = "okay";
225 225
226 touchscreen@4a { 226 touchscreen@4a {
227 compatible = "atmel,maxtouch"; 227 compatible = "atmel,maxtouch";
228 reg = <0x4a>; 228 reg = <0x4a>;
229 229
230 interrupts-extended = <&tlmm 1 230 interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
231 231
232 reset-gpios = <&tlmm 12 GPIO_A 232 reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
233 233
234 vdda-supply = <&pm8916_l6>; 234 vdda-supply = <&pm8916_l6>;
235 vdd-supply = <®_ts_vdd>; 235 vdd-supply = <®_ts_vdd>;
236 236
237 pinctrl-0 = <&ts_int_reset_def 237 pinctrl-0 = <&ts_int_reset_default>;
238 pinctrl-names = "default"; 238 pinctrl-names = "default";
239 239
240 /* Keys listed from right to l 240 /* Keys listed from right to left */
241 linux,keycodes = <KEY_APPSELEC 241 linux,keycodes = <KEY_APPSELECT KEY_HOMEPAGE KEY_BACK>;
242 }; 242 };
243 }; 243 };
244 244
245 &blsp_uart2 { 245 &blsp_uart2 {
246 status = "okay"; 246 status = "okay";
247 }; 247 };
248 248
249 &pm8916_gpios { 249 &pm8916_gpios {
250 status_led_default: status-led-default 250 status_led_default: status-led-default-state {
251 pins = "gpio3"; 251 pins = "gpio3";
252 function = PMIC_GPIO_FUNC_NORM 252 function = PMIC_GPIO_FUNC_NORMAL;
253 power-source = <PM8916_GPIO_VP 253 power-source = <PM8916_GPIO_VPH>;
254 bias-disable; 254 bias-disable;
255 output-high; 255 output-high;
256 }; 256 };
257 }; 257 };
258 258
259 &pm8916_mpps { 259 &pm8916_mpps {
260 pwm_out: mpp4-state { 260 pwm_out: mpp4-state {
261 pins = "mpp4"; 261 pins = "mpp4";
262 function = "digital"; 262 function = "digital";
263 power-source = <PM8916_MPP_VPH 263 power-source = <PM8916_MPP_VPH>;
264 output-low; 264 output-low;
265 qcom,dtest = <1>; 265 qcom,dtest = <1>;
266 }; 266 };
267 }; 267 };
268 268
269 &pm8916_pwm { 269 &pm8916_pwm {
270 pinctrl-0 = <&pwm_out>; 270 pinctrl-0 = <&pwm_out>;
271 pinctrl-names = "default"; 271 pinctrl-names = "default";
272 status = "okay"; 272 status = "okay";
273 }; 273 };
274 274
275 &pm8916_resin { 275 &pm8916_resin {
276 linux,code = <KEY_VOLUMEDOWN>; 276 linux,code = <KEY_VOLUMEDOWN>;
277 status = "okay"; 277 status = "okay";
278 }; 278 };
279 279
280 &pm8916_rpm_regulators { 280 &pm8916_rpm_regulators {
281 pm8916_l17: l17 { 281 pm8916_l17: l17 {
282 regulator-min-microvolt = <285 282 regulator-min-microvolt = <2850000>;
283 regulator-max-microvolt = <285 283 regulator-max-microvolt = <2850000>;
284 }; 284 };
285 }; 285 };
286 286
287 &pm8916_vib { 287 &pm8916_vib {
288 status = "okay"; 288 status = "okay";
289 }; 289 };
290 290
291 &sdhc_1 { 291 &sdhc_1 {
292 status = "okay"; 292 status = "okay";
293 }; 293 };
294 294
295 &sdhc_2 { 295 &sdhc_2 {
296 pinctrl-0 = <&sdc2_default &sdc2_cd_de 296 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
297 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa 297 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
298 pinctrl-names = "default", "sleep"; 298 pinctrl-names = "default", "sleep";
299 299
300 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 300 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
301 301
302 status = "okay"; 302 status = "okay";
303 }; 303 };
304 304
305 &usb { 305 &usb {
306 extcon = <&usb_id>, <&usb_id>; 306 extcon = <&usb_id>, <&usb_id>;
307 status = "okay"; 307 status = "okay";
308 }; 308 };
309 309
310 &usb_hs_phy { 310 &usb_hs_phy {
311 extcon = <&usb_id>; 311 extcon = <&usb_id>;
312 }; 312 };
313 313
314 &wcnss { 314 &wcnss {
315 status = "okay"; 315 status = "okay";
316 }; 316 };
317 317
318 &wcnss_iris { 318 &wcnss_iris {
319 compatible = "qcom,wcn3620"; 319 compatible = "qcom,wcn3620";
320 }; 320 };
321 321
322 &wcnss_mem { 322 &wcnss_mem {
323 status = "okay"; 323 status = "okay";
324 }; 324 };
325 325
326 &tlmm { 326 &tlmm {
327 button_backlight_default: button-backl 327 button_backlight_default: button-backlight-default-state {
328 pins = "gpio17"; 328 pins = "gpio17";
329 function = "gpio"; 329 function = "gpio";
330 drive-strength = <2>; 330 drive-strength = <2>;
331 bias-disable; 331 bias-disable;
332 }; 332 };
333 333
334 camera_front_flash_default: camera-fro 334 camera_front_flash_default: camera-front-flash-default-state {
335 pins = "gpio8", "gpio49"; 335 pins = "gpio8", "gpio49";
336 function = "gpio"; 336 function = "gpio";
337 drive-strength = <2>; 337 drive-strength = <2>;
338 bias-disable; 338 bias-disable;
339 }; 339 };
340 340
341 camera_rear_flash_default: camera-rear 341 camera_rear_flash_default: camera-rear-flash-default-state {
342 pins = "gpio9", "gpio16", "gpi 342 pins = "gpio9", "gpio16", "gpio51";
343 function = "gpio"; 343 function = "gpio";
344 drive-strength = <2>; 344 drive-strength = <2>;
345 bias-disable; 345 bias-disable;
346 }; 346 };
347 347
348 gpio_hall_sensor_default: gpio-hall-se 348 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
349 pins = "gpio20"; 349 pins = "gpio20";
350 function = "gpio"; 350 function = "gpio";
351 drive-strength = <2>; 351 drive-strength = <2>;
352 bias-disable; 352 bias-disable;
353 }; 353 };
354 354
355 gpio_keys_default: gpio-keys-default-s 355 gpio_keys_default: gpio-keys-default-state {
356 pins = "gpio107"; 356 pins = "gpio107";
357 function = "gpio"; 357 function = "gpio";
358 drive-strength = <2>; 358 drive-strength = <2>;
359 bias-pull-up; 359 bias-pull-up;
360 }; 360 };
361 361
362 lcd_bl_en_default: lcd-bl-en-default-s 362 lcd_bl_en_default: lcd-bl-en-default-state {
363 pins = "gpio98"; 363 pins = "gpio98";
364 function = "gpio"; 364 function = "gpio";
365 drive-strength = <2>; 365 drive-strength = <2>;
366 bias-disable; 366 bias-disable;
367 }; 367 };
368 368
369 light_int_default: light-int-default-s 369 light_int_default: light-int-default-state {
370 pins = "gpio113"; 370 pins = "gpio113";
371 function = "gpio"; 371 function = "gpio";
372 drive-strength = <2>; 372 drive-strength = <2>;
373 bias-disable; 373 bias-disable;
374 }; 374 };
375 375
376 mag_reset_default: mag-reset-default-s 376 mag_reset_default: mag-reset-default-state {
377 pins = "gpio68"; 377 pins = "gpio68";
378 function = "gpio"; 378 function = "gpio";
379 drive-strength = <2>; 379 drive-strength = <2>;
380 bias-disable; 380 bias-disable;
381 }; 381 };
382 382
383 sdc2_cd_default: sdc2-cd-default-state 383 sdc2_cd_default: sdc2-cd-default-state {
384 pins = "gpio38"; 384 pins = "gpio38";
385 function = "gpio"; 385 function = "gpio";
386 drive-strength = <2>; 386 drive-strength = <2>;
387 bias-disable; 387 bias-disable;
388 }; 388 };
389 389
390 ts_int_reset_default: ts-int-reset-def 390 ts_int_reset_default: ts-int-reset-default-state {
391 pins = "gpio12", "gpio13"; 391 pins = "gpio12", "gpio13";
392 function = "gpio"; 392 function = "gpio";
393 drive-strength = <2>; 393 drive-strength = <2>;
394 bias-disable; 394 bias-disable;
395 }; 395 };
396 396
397 ts_vdd_default: ts-vdd-default-state { 397 ts_vdd_default: ts-vdd-default-state {
398 pins = "gpio78"; 398 pins = "gpio78";
399 function = "gpio"; 399 function = "gpio";
400 drive-strength = <2>; 400 drive-strength = <2>;
401 bias-disable; 401 bias-disable;
402 }; 402 };
403 403
404 usb_id_default: usb-id-default-state { 404 usb_id_default: usb-id-default-state {
405 pins = "gpio110"; 405 pins = "gpio110";
406 function = "gpio"; 406 function = "gpio";
407 drive-strength = <8>; 407 drive-strength = <8>;
408 bias-pull-up; 408 bias-pull-up;
409 }; 409 };
410 410
411 usb_id_switch_default: usb-id-switch-d 411 usb_id_switch_default: usb-id-switch-default-state {
412 pins = "gpio121"; 412 pins = "gpio121";
413 function = "gpio"; 413 function = "gpio";
414 drive-strength = <2>; 414 drive-strength = <2>;
415 output-high; 415 output-high;
416 }; 416 };
417 }; 417 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.