1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8939-pm8916.dtsi" 5 #include "msm8939-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" 6 #include "msm8916-modem-qdsp6.dtsi"
7 7
8 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq 10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/sound/apq8016-lpass.h> 11 #include <dt-bindings/sound/apq8016-lpass.h>
12 12
13 / { 13 / {
14 model = "Samsung Galaxy A7 (2015)"; 14 model = "Samsung Galaxy A7 (2015)";
15 compatible = "samsung,a7", "qcom,msm89 15 compatible = "samsung,a7", "qcom,msm8939";
16 chassis-type = "handset"; 16 chassis-type = "handset";
17 17
18 aliases { 18 aliases {
19 mmc0 = &sdhc_1; /* SDC1 eMMC s 19 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
20 mmc1 = &sdhc_2; /* SDC2 SD car 20 mmc1 = &sdhc_2; /* SDC2 SD card slot */
21 serial0 = &blsp_uart2; 21 serial0 = &blsp_uart2;
22 }; 22 };
23 23
24 chosen { 24 chosen {
25 stdout-path = "serial0"; 25 stdout-path = "serial0";
26 }; 26 };
27 27
28 reserved-memory { 28 reserved-memory {
29 /* Additional memory used by S 29 /* Additional memory used by Samsung firmware modifications */
30 tz-apps@85500000 { 30 tz-apps@85500000 {
31 reg = <0x0 0x85500000 31 reg = <0x0 0x85500000 0x0 0xb00000>;
32 no-map; 32 no-map;
33 }; 33 };
34 }; 34 };
35 35
36 battery: battery { <<
37 compatible = "simple-battery"; <<
38 charge-term-current-microamp = <<
39 constant-charge-current-max-mi <<
40 constant-charge-voltage-max-mi <<
41 precharge-current-microamp = < <<
42 precharge-upper-limit-microvol <<
43 }; <<
44 <<
45 gpio-hall-sensor { 36 gpio-hall-sensor {
46 compatible = "gpio-keys"; 37 compatible = "gpio-keys";
47 38
48 pinctrl-0 = <&gpio_hall_sensor 39 pinctrl-0 = <&gpio_hall_sensor_default>;
49 pinctrl-names = "default"; 40 pinctrl-names = "default";
50 41
51 label = "GPIO Hall Effect Sens 42 label = "GPIO Hall Effect Sensor";
52 43
53 event-hall-sensor { 44 event-hall-sensor {
54 label = "Hall Effect S 45 label = "Hall Effect Sensor";
55 gpios = <&tlmm 52 GPIO 46 gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
56 linux,input-type = <EV 47 linux,input-type = <EV_SW>;
57 linux,code = <SW_LID>; 48 linux,code = <SW_LID>;
58 linux,can-disable; 49 linux,can-disable;
59 }; 50 };
60 }; 51 };
61 52
62 gpio-keys { 53 gpio-keys {
63 compatible = "gpio-keys"; 54 compatible = "gpio-keys";
64 55
65 pinctrl-0 = <&gpio_keys_defaul 56 pinctrl-0 = <&gpio_keys_default>;
66 pinctrl-names = "default"; 57 pinctrl-names = "default";
67 58
68 label = "GPIO Buttons"; 59 label = "GPIO Buttons";
69 60
70 button-volume-up { 61 button-volume-up {
71 label = "Volume Up"; 62 label = "Volume Up";
72 gpios = <&tlmm 107 GPI 63 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
73 linux,code = <KEY_VOLU 64 linux,code = <KEY_VOLUMEUP>;
74 }; 65 };
75 66
76 button-home { 67 button-home {
77 label = "Home"; 68 label = "Home";
78 gpios = <&tlmm 109 GPI 69 gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
79 linux,code = <KEY_HOME 70 linux,code = <KEY_HOMEPAGE>;
80 }; 71 };
81 }; 72 };
82 73
83 i2c-fg { 74 i2c-fg {
84 compatible = "i2c-gpio"; 75 compatible = "i2c-gpio";
85 sda-gpios = <&tlmm 106 (GPIO_A 76 sda-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
86 scl-gpios = <&tlmm 105 (GPIO_A 77 scl-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
87 78
88 pinctrl-0 = <&fg_i2c_default>; 79 pinctrl-0 = <&fg_i2c_default>;
89 pinctrl-names = "default"; 80 pinctrl-names = "default";
90 81
91 #address-cells = <1>; 82 #address-cells = <1>;
92 #size-cells = <0>; 83 #size-cells = <0>;
93 84
94 fuel-gauge@35 { !! 85 battery@35 {
95 compatible = "richtek, 86 compatible = "richtek,rt5033-battery";
96 reg = <0x35>; 87 reg = <0x35>;
97 88
98 interrupt-parent = <&t 89 interrupt-parent = <&tlmm>;
99 interrupts = <121 IRQ_ 90 interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
100 91
101 pinctrl-0 = <&fg_alert 92 pinctrl-0 = <&fg_alert_default>;
102 pinctrl-names = "defau 93 pinctrl-names = "default";
103 <<
104 power-supplies = <&cha <<
105 }; 94 };
106 }; 95 };
107 96
108 i2c-nfc { 97 i2c-nfc {
109 compatible = "i2c-gpio"; 98 compatible = "i2c-gpio";
110 sda-gpios = <&tlmm 0 (GPIO_ACT 99 sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
111 scl-gpios = <&tlmm 1 (GPIO_ACT 100 scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
112 101
113 pinctrl-0 = <&nfc_i2c_default> 102 pinctrl-0 = <&nfc_i2c_default>;
114 pinctrl-names = "default"; 103 pinctrl-names = "default";
115 104
116 #address-cells = <1>; 105 #address-cells = <1>;
117 #size-cells = <0>; 106 #size-cells = <0>;
118 107
119 nfc@2b { 108 nfc@2b {
120 compatible = "nxp,pn54 109 compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
121 reg = <0x2b>; 110 reg = <0x2b>;
122 111
123 interrupt-parent = <&t 112 interrupt-parent = <&tlmm>;
124 interrupts = <21 IRQ_T 113 interrupts = <21 IRQ_TYPE_EDGE_RISING>;
125 114
126 enable-gpios = <&tlmm 115 enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
127 firmware-gpios = <&tlm 116 firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
128 117
129 pinctrl-0 = <&nfc_defa 118 pinctrl-0 = <&nfc_default>;
130 pinctrl-names = "defau 119 pinctrl-names = "default";
131 }; 120 };
132 }; 121 };
133 122
134 i2c-sensor { 123 i2c-sensor {
135 compatible = "i2c-gpio"; 124 compatible = "i2c-gpio";
136 sda-gpios = <&tlmm 84 (GPIO_AC 125 sda-gpios = <&tlmm 84 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
137 scl-gpios = <&tlmm 85 (GPIO_AC 126 scl-gpios = <&tlmm 85 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
138 127
139 pinctrl-0 = <&sensor_i2c_defau 128 pinctrl-0 = <&sensor_i2c_default>;
140 pinctrl-names = "default"; 129 pinctrl-names = "default";
141 130
142 #address-cells = <1>; 131 #address-cells = <1>;
143 #size-cells = <0>; 132 #size-cells = <0>;
144 133
145 accelerometer: accelerometer@1 134 accelerometer: accelerometer@10 {
146 compatible = "bosch,bm 135 compatible = "bosch,bmc150_accel";
147 reg = <0x10>; 136 reg = <0x10>;
148 interrupt-parent = <&t 137 interrupt-parent = <&tlmm>;
149 interrupts = <115 IRQ_ 138 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
150 139
151 vdd-supply = <&pm8916_ 140 vdd-supply = <&pm8916_l17>;
152 vddio-supply = <&pm891 141 vddio-supply = <&pm8916_l5>;
153 142
154 pinctrl-0 = <&accel_in 143 pinctrl-0 = <&accel_int_default>;
155 pinctrl-names = "defau 144 pinctrl-names = "default";
156 145
157 mount-matrix = "-1", " 146 mount-matrix = "-1", "0", "0",
158 "0", " 147 "0", "-1", "0",
159 "0", " 148 "0", "0", "1";
160 }; 149 };
161 150
162 magnetometer@12 { 151 magnetometer@12 {
163 compatible = "bosch,bm 152 compatible = "bosch,bmc150_magn";
164 reg = <0x12>; 153 reg = <0x12>;
165 154
166 vdd-supply = <&pm8916_ 155 vdd-supply = <&pm8916_l17>;
167 vddio-supply = <&pm891 156 vddio-supply = <&pm8916_l5>;
168 }; 157 };
169 }; 158 };
170 159
171 i2c-tkey { 160 i2c-tkey {
172 compatible = "i2c-gpio"; 161 compatible = "i2c-gpio";
173 sda-gpios = <&tlmm 16 (GPIO_AC 162 sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
174 scl-gpios = <&tlmm 17 (GPIO_AC 163 scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
175 164
176 pinctrl-0 = <&tkey_i2c_default 165 pinctrl-0 = <&tkey_i2c_default>;
177 pinctrl-names = "default"; 166 pinctrl-names = "default";
178 167
179 #address-cells = <1>; 168 #address-cells = <1>;
180 #size-cells = <0>; 169 #size-cells = <0>;
181 170
182 touchkey@20 { 171 touchkey@20 {
183 /* Note: Actually an A 172 /* Note: Actually an ABOV MCU that implements same interface */
184 compatible = "corerive 173 compatible = "coreriver,tc360-touchkey";
185 reg = <0x20>; 174 reg = <0x20>;
186 175
187 interrupt-parent = <&t 176 interrupt-parent = <&tlmm>;
188 interrupts = <20 IRQ_T 177 interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
189 178
190 vcc-supply = <®_tou 179 vcc-supply = <®_touch_key>;
191 vdd-supply = <®_key 180 vdd-supply = <®_keyled>;
192 vddio-supply = <&pm891 181 vddio-supply = <&pm8916_l6>;
193 182
194 linux,keycodes = <KEY_ 183 linux,keycodes = <KEY_APPSELECT KEY_BACK>;
195 184
196 pinctrl-0 = <&tkey_def 185 pinctrl-0 = <&tkey_default>;
197 pinctrl-names = "defau 186 pinctrl-names = "default";
198 }; 187 };
199 }; 188 };
200 189
201 pwm_vibrator: pwm { !! 190 pwm_vibrator: pwm-vibrator {
202 compatible = "clk-pwm"; 191 compatible = "clk-pwm";
203 #pwm-cells = <2>; 192 #pwm-cells = <2>;
204 193
205 clocks = <&gcc GCC_GP2_CLK>; 194 clocks = <&gcc GCC_GP2_CLK>;
206 195
207 pinctrl-0 = <&motor_pwm_defaul 196 pinctrl-0 = <&motor_pwm_default>;
208 pinctrl-names = "default"; 197 pinctrl-names = "default";
209 }; 198 };
210 199
211 reg_keyled: regulator-keyled { 200 reg_keyled: regulator-keyled {
212 compatible = "regulator-fixed" 201 compatible = "regulator-fixed";
213 regulator-name = "keyled"; 202 regulator-name = "keyled";
214 regulator-min-microvolt = <330 203 regulator-min-microvolt = <3300000>;
215 regulator-max-microvolt = <330 204 regulator-max-microvolt = <3300000>;
216 205
217 /* NOTE: On some variants e.g. 206 /* NOTE: On some variants e.g. SM-A700FD it's GPIO 91 */
218 gpio = <&tlmm 100 GPIO_ACTIVE_ 207 gpio = <&tlmm 100 GPIO_ACTIVE_HIGH>;
219 enable-active-high; 208 enable-active-high;
220 209
221 pinctrl-0 = <&tkey_led_en_defa 210 pinctrl-0 = <&tkey_led_en_default>;
222 pinctrl-names = "default"; 211 pinctrl-names = "default";
223 }; 212 };
224 213
225 reg_touch_key: regulator-touch-key { 214 reg_touch_key: regulator-touch-key {
226 compatible = "regulator-fixed" 215 compatible = "regulator-fixed";
227 regulator-name = "touch_key"; 216 regulator-name = "touch_key";
228 regulator-min-microvolt = <280 217 regulator-min-microvolt = <2800000>;
229 regulator-max-microvolt = <280 218 regulator-max-microvolt = <2800000>;
230 219
231 gpio = <&tlmm 56 GPIO_ACTIVE_H 220 gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
232 enable-active-high; 221 enable-active-high;
233 222
234 pinctrl-0 = <&tkey_en_default> 223 pinctrl-0 = <&tkey_en_default>;
235 pinctrl-names = "default"; 224 pinctrl-names = "default";
236 }; 225 };
237 226
238 reg_tsp_vdd: regulator-tsp-vdd { 227 reg_tsp_vdd: regulator-tsp-vdd {
239 compatible = "regulator-fixed" 228 compatible = "regulator-fixed";
240 regulator-name = "tsp_vdd"; 229 regulator-name = "tsp_vdd";
241 regulator-min-microvolt = <180 230 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <180 231 regulator-max-microvolt = <1800000>;
243 vin-supply = <&pm8916_s4>; 232 vin-supply = <&pm8916_s4>;
244 233
245 gpio = <&tlmm 8 GPIO_ACTIVE_HI 234 gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
246 enable-active-high; 235 enable-active-high;
247 236
248 pinctrl-0 = <®_tsp_io_en_de 237 pinctrl-0 = <®_tsp_io_en_default>;
249 pinctrl-names = "default"; 238 pinctrl-names = "default";
250 }; 239 };
251 240
252 reg_vdd_tsp: regulator-vdd-tsp { 241 reg_vdd_tsp: regulator-vdd-tsp {
253 compatible = "regulator-fixed" 242 compatible = "regulator-fixed";
254 regulator-name = "vdd_tsp"; 243 regulator-name = "vdd_tsp";
255 regulator-min-microvolt = <330 244 regulator-min-microvolt = <3300000>;
256 regulator-max-microvolt = <330 245 regulator-max-microvolt = <3300000>;
257 246
258 gpio = <&tlmm 73 GPIO_ACTIVE_H 247 gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
259 enable-active-high; 248 enable-active-high;
260 249
261 pinctrl-0 = <®_tsp_en_defau 250 pinctrl-0 = <®_tsp_en_default>;
262 pinctrl-names = "default"; 251 pinctrl-names = "default";
263 }; 252 };
264 253
265 reg_vibrator: regulator-vibrator { 254 reg_vibrator: regulator-vibrator {
266 compatible = "regulator-fixed" 255 compatible = "regulator-fixed";
267 regulator-name = "motor_en"; 256 regulator-name = "motor_en";
268 regulator-min-microvolt = <300 257 regulator-min-microvolt = <3000000>;
269 regulator-max-microvolt = <300 258 regulator-max-microvolt = <3000000>;
270 259
271 gpio = <&tlmm 86 GPIO_ACTIVE_H 260 gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
272 enable-active-high; 261 enable-active-high;
273 262
274 pinctrl-0 = <&motor_en_default 263 pinctrl-0 = <&motor_en_default>;
275 pinctrl-names = "default"; 264 pinctrl-names = "default";
276 }; 265 };
277 266
278 vibrator { 267 vibrator {
279 compatible = "pwm-vibrator"; 268 compatible = "pwm-vibrator";
280 269
281 pwms = <&pwm_vibrator 0 100000 270 pwms = <&pwm_vibrator 0 100000>;
282 pwm-names = "enable"; 271 pwm-names = "enable";
283 272
284 vcc-supply = <®_vibrator>; 273 vcc-supply = <®_vibrator>;
285 }; 274 };
286 }; 275 };
287 276
288 &blsp_i2c1 { 277 &blsp_i2c1 {
289 status = "okay"; 278 status = "okay";
290 279
291 muic: extcon@25 { 280 muic: extcon@25 {
292 compatible = "siliconmitus,sm5 281 compatible = "siliconmitus,sm5502-muic";
293 reg = <0x25>; 282 reg = <0x25>;
294 283
295 interrupt-parent = <&tlmm>; 284 interrupt-parent = <&tlmm>;
296 interrupts = <12 IRQ_TYPE_EDGE 285 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
297 286
298 pinctrl-0 = <&muic_int_default 287 pinctrl-0 = <&muic_int_default>;
299 pinctrl-names = "default"; 288 pinctrl-names = "default";
300 289
301 usb_con: connector { 290 usb_con: connector {
302 compatible = "usb-b-co 291 compatible = "usb-b-connector";
303 label = "micro-USB"; 292 label = "micro-USB";
304 type = "micro"; 293 type = "micro";
305 }; 294 };
306 }; 295 };
307 }; 296 };
308 297
309 &blsp_i2c2 { 298 &blsp_i2c2 {
310 status = "okay"; 299 status = "okay";
311 300
312 speaker_codec: audio-codec@34 { 301 speaker_codec: audio-codec@34 {
313 compatible = "nxp,tfa9895"; 302 compatible = "nxp,tfa9895";
314 reg = <0x34>; 303 reg = <0x34>;
315 vddd-supply = <&pm8916_l5>; 304 vddd-supply = <&pm8916_l5>;
316 sound-name-prefix = "Speaker"; 305 sound-name-prefix = "Speaker";
317 #sound-dai-cells = <0>; 306 #sound-dai-cells = <0>;
318 }; 307 };
319 }; 308 };
320 309
321 &blsp_i2c5 { 310 &blsp_i2c5 {
322 status = "okay"; 311 status = "okay";
323 312
324 touchscreen@24 { 313 touchscreen@24 {
325 compatible = "cypress,tt21000" 314 compatible = "cypress,tt21000";
326 315
327 reg = <0x24>; 316 reg = <0x24>;
328 interrupt-parent = <&tlmm>; 317 interrupt-parent = <&tlmm>;
329 interrupts = <13 IRQ_TYPE_EDGE 318 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
330 319
331 vdd-supply = <®_vdd_tsp>; 320 vdd-supply = <®_vdd_tsp>;
332 vddio-supply = <®_tsp_vdd>; 321 vddio-supply = <®_tsp_vdd>;
333 322
334 pinctrl-0 = <&tsp_int_default> 323 pinctrl-0 = <&tsp_int_default>;
335 pinctrl-names = "default"; 324 pinctrl-names = "default";
336 }; 325 };
337 }; 326 };
338 327
339 &blsp_i2c6 { <<
340 status = "okay"; <<
341 <<
342 pmic@34 { <<
343 compatible = "richtek,rt5033"; <<
344 reg = <0x34>; <<
345 <<
346 interrupts-extended = <&tlmm 6 <<
347 <<
348 pinctrl-0 = <&pmic_int_default <<
349 pinctrl-names = "default"; <<
350 <<
351 regulators { <<
352 rt5033_reg_safe_ldo: S <<
353 regulator-min- <<
354 regulator-max- <<
355 regulator-alwa <<
356 }; <<
357 <<
358 /* <<
359 * Needed for camera, <<
360 * Define empty nodes <<
361 * regulators. <<
362 */ <<
363 LDO {}; <<
364 BUCK {}; <<
365 }; <<
366 <<
367 charger: charger { <<
368 compatible = "richtek, <<
369 monitored-battery = <& <<
370 richtek,usb-connector <<
371 }; <<
372 }; <<
373 }; <<
374 <<
375 &blsp_uart2 { 328 &blsp_uart2 {
376 status = "okay"; 329 status = "okay";
377 }; 330 };
378 331
379 /* 332 /*
380 * For some reason the speaker amplifier is co 333 * For some reason the speaker amplifier is connected to the second SD line
381 * (MI2S_2_D1) instead of the first (MI2S_2_D0 334 * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
382 * device tree, otherwise audio will seemingly 335 * device tree, otherwise audio will seemingly play fine on the wrong SD line
383 * but the speaker stays silent. 336 * but the speaker stays silent.
384 * 337 *
385 * When routing audio via QDSP6 (the default) 338 * When routing audio via QDSP6 (the default) the &lpass node is reserved and
386 * the definitions from &q6afedai are used. Wh 339 * the definitions from &q6afedai are used. When the modem is disabled audio can
387 * be alternatively routed directly to the LPA 340 * be alternatively routed directly to the LPASS hardware with reduced latency.
388 * The definitions for &lpass are here for com 341 * The definitions for &lpass are here for completeness to simplify changing the
389 * setup with minor changes to the DT (either 342 * setup with minor changes to the DT (either manually or with DT overlays).
390 */ 343 */
391 &lpass { 344 &lpass {
392 dai-link@3 { 345 dai-link@3 {
393 reg = <MI2S_QUATERNARY>; 346 reg = <MI2S_QUATERNARY>;
394 qcom,playback-sd-lines = <1>; 347 qcom,playback-sd-lines = <1>;
395 }; 348 };
396 }; 349 };
397 350
398 &mpss_mem { 351 &mpss_mem {
399 reg = <0x0 0x86800000 0x0 0x5800000>; 352 reg = <0x0 0x86800000 0x0 0x5800000>;
400 }; 353 };
401 354
402 &pm8916_resin { 355 &pm8916_resin {
403 linux,code = <KEY_VOLUMEDOWN>; 356 linux,code = <KEY_VOLUMEDOWN>;
404 status = "okay"; 357 status = "okay";
405 }; 358 };
406 359
407 &pm8916_rpm_regulators { 360 &pm8916_rpm_regulators {
408 pm8916_l17: l17 { 361 pm8916_l17: l17 {
409 regulator-min-microvolt = <285 362 regulator-min-microvolt = <2850000>;
410 regulator-max-microvolt = <285 363 regulator-max-microvolt = <2850000>;
411 }; 364 };
412 }; 365 };
413 366
414 &q6afedai { 367 &q6afedai {
415 dai@22 { 368 dai@22 {
416 reg = <QUATERNARY_MI2S_RX>; 369 reg = <QUATERNARY_MI2S_RX>;
417 qcom,sd-lines = <1>; 370 qcom,sd-lines = <1>;
418 }; 371 };
419 }; 372 };
420 373
421 &sdhc_1 { 374 &sdhc_1 {
422 status = "okay"; 375 status = "okay";
423 }; 376 };
424 377
425 &sdhc_2 { 378 &sdhc_2 {
426 pinctrl-0 = <&sdc2_default &sdc2_cd_de 379 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
427 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa 380 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
428 pinctrl-names = "default", "sleep"; 381 pinctrl-names = "default", "sleep";
429 382
430 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 383 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
431 384
432 status = "okay"; 385 status = "okay";
433 }; 386 };
434 387
435 &sound { 388 &sound {
436 model = "samsung-a2015"; 389 model = "samsung-a2015";
437 audio-routing = 390 audio-routing =
438 "AMIC1", "MIC BIAS External1", 391 "AMIC1", "MIC BIAS External1",
439 "AMIC2", "MIC BIAS Internal2", 392 "AMIC2", "MIC BIAS Internal2",
440 "AMIC3", "MIC BIAS External1"; 393 "AMIC3", "MIC BIAS External1";
441 394
442 pinctrl-0 = <&cdc_pdm_default &sec_mi2 395 pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
443 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_ 396 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
444 pinctrl-names = "default", "sleep"; 397 pinctrl-names = "default", "sleep";
445 398
446 sound_link_backend2: backend2-dai-link 399 sound_link_backend2: backend2-dai-link {
447 link-name = "Quaternary MI2S"; 400 link-name = "Quaternary MI2S";
448 401
449 cpu { 402 cpu {
450 sound-dai = <&q6afedai 403 sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
451 }; 404 };
452 platform { 405 platform {
453 sound-dai = <&q6routin 406 sound-dai = <&q6routing>;
454 }; 407 };
455 codec { 408 codec {
456 sound-dai = <&speaker_ 409 sound-dai = <&speaker_codec>;
457 }; 410 };
458 }; 411 };
459 }; 412 };
460 413
461 &usb { 414 &usb {
462 extcon = <&muic>, <&muic>; 415 extcon = <&muic>, <&muic>;
463 status = "okay"; 416 status = "okay";
464 }; 417 };
465 418
466 &usb_hs_phy { 419 &usb_hs_phy {
467 extcon = <&muic>; 420 extcon = <&muic>;
468 }; 421 };
469 422
470 &wcnss { 423 &wcnss {
471 status = "okay"; 424 status = "okay";
472 }; 425 };
473 426
474 &wcnss_iris { 427 &wcnss_iris {
475 compatible = "qcom,wcn3660b"; 428 compatible = "qcom,wcn3660b";
476 }; 429 };
477 430
478 &wcnss_mem { 431 &wcnss_mem {
479 status = "okay"; 432 status = "okay";
480 }; 433 };
481 434
482 &tlmm { 435 &tlmm {
483 accel_int_default: accel-int-default-s 436 accel_int_default: accel-int-default-state {
484 pins = "gpio115"; 437 pins = "gpio115";
485 function = "gpio"; 438 function = "gpio";
486 drive-strength = <2>; 439 drive-strength = <2>;
487 bias-disable; 440 bias-disable;
488 }; 441 };
489 442
490 fg_alert_default: fg-alert-default-sta 443 fg_alert_default: fg-alert-default-state {
491 pins = "gpio121"; 444 pins = "gpio121";
492 function = "gpio"; 445 function = "gpio";
493 drive-strength = <2>; 446 drive-strength = <2>;
494 bias-disable; 447 bias-disable;
495 }; 448 };
496 449
497 fg_i2c_default: fg-i2c-default-state { 450 fg_i2c_default: fg-i2c-default-state {
498 pins = "gpio105", "gpio106"; 451 pins = "gpio105", "gpio106";
499 function = "gpio"; 452 function = "gpio";
500 drive-strength = <2>; 453 drive-strength = <2>;
501 bias-disable; 454 bias-disable;
502 }; 455 };
503 456
504 gpio_hall_sensor_default: gpio-hall-se 457 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
505 pins = "gpio52"; 458 pins = "gpio52";
506 function = "gpio"; 459 function = "gpio";
507 drive-strength = <2>; 460 drive-strength = <2>;
508 bias-disable; 461 bias-disable;
509 }; 462 };
510 463
511 gpio_keys_default: gpio-keys-default-s 464 gpio_keys_default: gpio-keys-default-state {
512 pins = "gpio107", "gpio109"; 465 pins = "gpio107", "gpio109";
513 function = "gpio"; 466 function = "gpio";
514 drive-strength = <2>; 467 drive-strength = <2>;
515 bias-pull-up; 468 bias-pull-up;
516 }; 469 };
517 470
518 motor_en_default: motor-en-default-sta 471 motor_en_default: motor-en-default-state {
519 pins = "gpio86"; 472 pins = "gpio86";
520 function = "gpio"; 473 function = "gpio";
521 drive-strength = <2>; 474 drive-strength = <2>;
522 bias-disable; 475 bias-disable;
523 }; 476 };
524 477
525 motor_pwm_default: motor-pwm-default-s 478 motor_pwm_default: motor-pwm-default-state {
526 pins = "gpio50"; 479 pins = "gpio50";
527 function = "gcc_gp2_clk_a"; 480 function = "gcc_gp2_clk_a";
528 }; 481 };
529 482
530 muic_int_default: muic-int-default-sta 483 muic_int_default: muic-int-default-state {
531 pins = "gpio12"; 484 pins = "gpio12";
532 function = "gpio"; 485 function = "gpio";
533 drive-strength = <2>; 486 drive-strength = <2>;
534 bias-disable; 487 bias-disable;
535 }; 488 };
536 489
537 nfc_default: nfc-default-state { 490 nfc_default: nfc-default-state {
538 irq-pins { 491 irq-pins {
539 pins = "gpio21"; 492 pins = "gpio21";
540 function = "gpio"; 493 function = "gpio";
541 drive-strength = <2>; 494 drive-strength = <2>;
542 bias-pull-down; 495 bias-pull-down;
543 }; 496 };
544 497
545 nfc-pins { 498 nfc-pins {
546 pins = "gpio49", "gpio 499 pins = "gpio49", "gpio116";
547 function = "gpio"; 500 function = "gpio";
548 drive-strength = <2>; 501 drive-strength = <2>;
549 bias-disable; 502 bias-disable;
550 }; 503 };
551 }; 504 };
552 505
553 nfc_i2c_default: nfc-i2c-default-state 506 nfc_i2c_default: nfc-i2c-default-state {
554 pins = "gpio0", "gpio1"; 507 pins = "gpio0", "gpio1";
555 function = "gpio"; <<
556 drive-strength = <2>; <<
557 bias-disable; <<
558 }; <<
559 <<
560 pmic_int_default: pmic-int-default-sta <<
561 pins = "gpio62"; <<
562 function = "gpio"; 508 function = "gpio";
563 drive-strength = <2>; 509 drive-strength = <2>;
564 bias-disable; 510 bias-disable;
565 }; 511 };
566 512
567 reg_tsp_en_default: reg-tsp-en-default 513 reg_tsp_en_default: reg-tsp-en-default-state {
568 pins = "gpio73"; 514 pins = "gpio73";
569 function = "gpio"; 515 function = "gpio";
570 drive-strength = <2>; 516 drive-strength = <2>;
571 bias-disable; 517 bias-disable;
572 }; 518 };
573 519
574 reg_tsp_io_en_default: reg-tsp-io-en-d 520 reg_tsp_io_en_default: reg-tsp-io-en-default-state {
575 pins = "gpio8"; 521 pins = "gpio8";
576 function = "gpio"; 522 function = "gpio";
577 drive-strength = <2>; 523 drive-strength = <2>;
578 bias-disable; 524 bias-disable;
579 }; 525 };
580 526
581 sdc2_cd_default: sdc2-cd-default-state 527 sdc2_cd_default: sdc2-cd-default-state {
582 pins = "gpio38"; 528 pins = "gpio38";
583 function = "gpio"; 529 function = "gpio";
584 drive-strength = <2>; 530 drive-strength = <2>;
585 bias-disable; 531 bias-disable;
586 }; 532 };
587 533
588 sensor_i2c_default: sensor-i2c-default 534 sensor_i2c_default: sensor-i2c-default-state {
589 pins = "gpio84", "gpio85"; 535 pins = "gpio84", "gpio85";
590 function = "gpio"; 536 function = "gpio";
591 drive-strength = <2>; 537 drive-strength = <2>;
592 bias-disable; 538 bias-disable;
593 }; 539 };
594 540
595 tkey_default: tkey-default-state { 541 tkey_default: tkey-default-state {
596 pins = "gpio20"; 542 pins = "gpio20";
597 function = "gpio"; 543 function = "gpio";
598 drive-strength = <2>; 544 drive-strength = <2>;
599 bias-disable; 545 bias-disable;
600 }; 546 };
601 547
602 tkey_en_default: tkey-en-default-state 548 tkey_en_default: tkey-en-default-state {
603 pins = "gpio56"; 549 pins = "gpio56";
604 function = "gpio"; 550 function = "gpio";
605 drive-strength = <2>; 551 drive-strength = <2>;
606 bias-disable; 552 bias-disable;
607 }; 553 };
608 554
609 tkey_i2c_default: tkey-i2c-default-sta 555 tkey_i2c_default: tkey-i2c-default-state {
610 pins = "gpio16", "gpio17"; 556 pins = "gpio16", "gpio17";
611 function = "gpio"; 557 function = "gpio";
612 drive-strength = <2>; 558 drive-strength = <2>;
613 bias-disable; 559 bias-disable;
614 }; 560 };
615 561
616 tkey_led_en_default: tkey-led-en-defau 562 tkey_led_en_default: tkey-led-en-default-state {
617 pins = "gpio100"; 563 pins = "gpio100";
618 function = "gpio"; 564 function = "gpio";
619 drive-strength = <2>; 565 drive-strength = <2>;
620 bias-disable; 566 bias-disable;
621 }; 567 };
622 568
623 tsp_int_default: tsp-int-default-state 569 tsp_int_default: tsp-int-default-state {
624 pins = "gpio13"; 570 pins = "gpio13";
625 function = "gpio"; 571 function = "gpio";
626 drive-strength = <2>; 572 drive-strength = <2>;
627 bias-disable; 573 bias-disable;
628 }; 574 };
629 }; 575 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.