1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8939-pm8916.dtsi" 5 #include "msm8939-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" <<
7 6
8 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq 9 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/sound/apq8016-lpass.h> <<
12 10
13 / { 11 / {
14 model = "Samsung Galaxy A7 (2015)"; 12 model = "Samsung Galaxy A7 (2015)";
15 compatible = "samsung,a7", "qcom,msm89 13 compatible = "samsung,a7", "qcom,msm8939";
16 chassis-type = "handset"; 14 chassis-type = "handset";
17 15
18 aliases { 16 aliases {
19 mmc0 = &sdhc_1; /* SDC1 eMMC s 17 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
20 mmc1 = &sdhc_2; /* SDC2 SD car 18 mmc1 = &sdhc_2; /* SDC2 SD card slot */
21 serial0 = &blsp_uart2; 19 serial0 = &blsp_uart2;
22 }; 20 };
23 21
24 chosen { 22 chosen {
25 stdout-path = "serial0"; 23 stdout-path = "serial0";
26 }; 24 };
27 25
28 reserved-memory { 26 reserved-memory {
29 /* Additional memory used by S 27 /* Additional memory used by Samsung firmware modifications */
30 tz-apps@85500000 { 28 tz-apps@85500000 {
31 reg = <0x0 0x85500000 29 reg = <0x0 0x85500000 0x0 0xb00000>;
32 no-map; 30 no-map;
33 }; 31 };
34 }; 32 };
35 33
36 battery: battery { <<
37 compatible = "simple-battery"; <<
38 charge-term-current-microamp = <<
39 constant-charge-current-max-mi <<
40 constant-charge-voltage-max-mi <<
41 precharge-current-microamp = < <<
42 precharge-upper-limit-microvol <<
43 }; <<
44 <<
45 gpio-hall-sensor { 34 gpio-hall-sensor {
46 compatible = "gpio-keys"; 35 compatible = "gpio-keys";
47 36
48 pinctrl-0 = <&gpio_hall_sensor 37 pinctrl-0 = <&gpio_hall_sensor_default>;
49 pinctrl-names = "default"; 38 pinctrl-names = "default";
50 39
51 label = "GPIO Hall Effect Sens 40 label = "GPIO Hall Effect Sensor";
52 41
53 event-hall-sensor { 42 event-hall-sensor {
54 label = "Hall Effect S 43 label = "Hall Effect Sensor";
55 gpios = <&tlmm 52 GPIO 44 gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
56 linux,input-type = <EV 45 linux,input-type = <EV_SW>;
57 linux,code = <SW_LID>; 46 linux,code = <SW_LID>;
58 linux,can-disable; 47 linux,can-disable;
59 }; 48 };
60 }; 49 };
61 50
62 gpio-keys { 51 gpio-keys {
63 compatible = "gpio-keys"; 52 compatible = "gpio-keys";
64 53
65 pinctrl-0 = <&gpio_keys_defaul 54 pinctrl-0 = <&gpio_keys_default>;
66 pinctrl-names = "default"; 55 pinctrl-names = "default";
67 56
68 label = "GPIO Buttons"; 57 label = "GPIO Buttons";
69 58
70 button-volume-up { 59 button-volume-up {
71 label = "Volume Up"; 60 label = "Volume Up";
72 gpios = <&tlmm 107 GPI 61 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
73 linux,code = <KEY_VOLU 62 linux,code = <KEY_VOLUMEUP>;
74 }; 63 };
75 64
76 button-home { 65 button-home {
77 label = "Home"; 66 label = "Home";
78 gpios = <&tlmm 109 GPI 67 gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
79 linux,code = <KEY_HOME 68 linux,code = <KEY_HOMEPAGE>;
80 }; 69 };
81 }; 70 };
82 71
83 i2c-fg { 72 i2c-fg {
84 compatible = "i2c-gpio"; 73 compatible = "i2c-gpio";
85 sda-gpios = <&tlmm 106 (GPIO_A 74 sda-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
86 scl-gpios = <&tlmm 105 (GPIO_A 75 scl-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
87 76
88 pinctrl-0 = <&fg_i2c_default>; 77 pinctrl-0 = <&fg_i2c_default>;
89 pinctrl-names = "default"; 78 pinctrl-names = "default";
90 79
91 #address-cells = <1>; 80 #address-cells = <1>;
92 #size-cells = <0>; 81 #size-cells = <0>;
93 82
94 fuel-gauge@35 { !! 83 battery@35 {
95 compatible = "richtek, 84 compatible = "richtek,rt5033-battery";
96 reg = <0x35>; 85 reg = <0x35>;
97 86
98 interrupt-parent = <&t 87 interrupt-parent = <&tlmm>;
99 interrupts = <121 IRQ_ 88 interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
100 89
101 pinctrl-0 = <&fg_alert 90 pinctrl-0 = <&fg_alert_default>;
102 pinctrl-names = "defau 91 pinctrl-names = "default";
103 <<
104 power-supplies = <&cha <<
105 }; 92 };
106 }; 93 };
107 94
108 i2c-nfc { 95 i2c-nfc {
109 compatible = "i2c-gpio"; 96 compatible = "i2c-gpio";
110 sda-gpios = <&tlmm 0 (GPIO_ACT 97 sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
111 scl-gpios = <&tlmm 1 (GPIO_ACT 98 scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
112 99
113 pinctrl-0 = <&nfc_i2c_default> 100 pinctrl-0 = <&nfc_i2c_default>;
114 pinctrl-names = "default"; 101 pinctrl-names = "default";
115 102
116 #address-cells = <1>; 103 #address-cells = <1>;
117 #size-cells = <0>; 104 #size-cells = <0>;
118 105
119 nfc@2b { 106 nfc@2b {
120 compatible = "nxp,pn54 107 compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
121 reg = <0x2b>; 108 reg = <0x2b>;
122 109
123 interrupt-parent = <&t 110 interrupt-parent = <&tlmm>;
124 interrupts = <21 IRQ_T 111 interrupts = <21 IRQ_TYPE_EDGE_RISING>;
125 112
126 enable-gpios = <&tlmm 113 enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
127 firmware-gpios = <&tlm 114 firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
128 115
129 pinctrl-0 = <&nfc_defa 116 pinctrl-0 = <&nfc_default>;
130 pinctrl-names = "defau 117 pinctrl-names = "default";
131 }; 118 };
132 }; 119 };
133 120
134 i2c-sensor { 121 i2c-sensor {
135 compatible = "i2c-gpio"; 122 compatible = "i2c-gpio";
136 sda-gpios = <&tlmm 84 (GPIO_AC 123 sda-gpios = <&tlmm 84 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
137 scl-gpios = <&tlmm 85 (GPIO_AC 124 scl-gpios = <&tlmm 85 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
138 125
139 pinctrl-0 = <&sensor_i2c_defau 126 pinctrl-0 = <&sensor_i2c_default>;
140 pinctrl-names = "default"; 127 pinctrl-names = "default";
141 128
142 #address-cells = <1>; 129 #address-cells = <1>;
143 #size-cells = <0>; 130 #size-cells = <0>;
144 131
145 accelerometer: accelerometer@1 132 accelerometer: accelerometer@10 {
146 compatible = "bosch,bm 133 compatible = "bosch,bmc150_accel";
147 reg = <0x10>; 134 reg = <0x10>;
148 interrupt-parent = <&t 135 interrupt-parent = <&tlmm>;
149 interrupts = <115 IRQ_ 136 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
150 137
151 vdd-supply = <&pm8916_ 138 vdd-supply = <&pm8916_l17>;
152 vddio-supply = <&pm891 139 vddio-supply = <&pm8916_l5>;
153 140
154 pinctrl-0 = <&accel_in 141 pinctrl-0 = <&accel_int_default>;
155 pinctrl-names = "defau 142 pinctrl-names = "default";
156 143
157 mount-matrix = "-1", " 144 mount-matrix = "-1", "0", "0",
158 "0", " 145 "0", "-1", "0",
159 "0", " 146 "0", "0", "1";
160 }; 147 };
161 148
162 magnetometer@12 { 149 magnetometer@12 {
163 compatible = "bosch,bm 150 compatible = "bosch,bmc150_magn";
164 reg = <0x12>; 151 reg = <0x12>;
165 152
166 vdd-supply = <&pm8916_ 153 vdd-supply = <&pm8916_l17>;
167 vddio-supply = <&pm891 154 vddio-supply = <&pm8916_l5>;
168 }; 155 };
169 }; 156 };
170 157
171 i2c-tkey { 158 i2c-tkey {
172 compatible = "i2c-gpio"; 159 compatible = "i2c-gpio";
173 sda-gpios = <&tlmm 16 (GPIO_AC 160 sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
174 scl-gpios = <&tlmm 17 (GPIO_AC 161 scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
175 162
176 pinctrl-0 = <&tkey_i2c_default 163 pinctrl-0 = <&tkey_i2c_default>;
177 pinctrl-names = "default"; 164 pinctrl-names = "default";
178 165
179 #address-cells = <1>; 166 #address-cells = <1>;
180 #size-cells = <0>; 167 #size-cells = <0>;
181 168
182 touchkey@20 { 169 touchkey@20 {
183 /* Note: Actually an A 170 /* Note: Actually an ABOV MCU that implements same interface */
184 compatible = "corerive 171 compatible = "coreriver,tc360-touchkey";
185 reg = <0x20>; 172 reg = <0x20>;
186 173
187 interrupt-parent = <&t 174 interrupt-parent = <&tlmm>;
188 interrupts = <20 IRQ_T 175 interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
189 176
190 vcc-supply = <®_tou 177 vcc-supply = <®_touch_key>;
191 vdd-supply = <®_key 178 vdd-supply = <®_keyled>;
192 vddio-supply = <&pm891 179 vddio-supply = <&pm8916_l6>;
193 180
194 linux,keycodes = <KEY_ 181 linux,keycodes = <KEY_APPSELECT KEY_BACK>;
195 182
196 pinctrl-0 = <&tkey_def 183 pinctrl-0 = <&tkey_default>;
197 pinctrl-names = "defau 184 pinctrl-names = "default";
198 }; 185 };
199 }; 186 };
200 187
201 pwm_vibrator: pwm { !! 188 pwm_vibrator: pwm-vibrator {
202 compatible = "clk-pwm"; 189 compatible = "clk-pwm";
203 #pwm-cells = <2>; 190 #pwm-cells = <2>;
204 191
205 clocks = <&gcc GCC_GP2_CLK>; 192 clocks = <&gcc GCC_GP2_CLK>;
206 193
207 pinctrl-0 = <&motor_pwm_defaul 194 pinctrl-0 = <&motor_pwm_default>;
208 pinctrl-names = "default"; 195 pinctrl-names = "default";
209 }; 196 };
210 197
211 reg_keyled: regulator-keyled { 198 reg_keyled: regulator-keyled {
212 compatible = "regulator-fixed" 199 compatible = "regulator-fixed";
213 regulator-name = "keyled"; 200 regulator-name = "keyled";
214 regulator-min-microvolt = <330 201 regulator-min-microvolt = <3300000>;
215 regulator-max-microvolt = <330 202 regulator-max-microvolt = <3300000>;
216 203
217 /* NOTE: On some variants e.g. 204 /* NOTE: On some variants e.g. SM-A700FD it's GPIO 91 */
218 gpio = <&tlmm 100 GPIO_ACTIVE_ 205 gpio = <&tlmm 100 GPIO_ACTIVE_HIGH>;
219 enable-active-high; 206 enable-active-high;
220 207
221 pinctrl-0 = <&tkey_led_en_defa 208 pinctrl-0 = <&tkey_led_en_default>;
222 pinctrl-names = "default"; 209 pinctrl-names = "default";
223 }; 210 };
224 211
225 reg_touch_key: regulator-touch-key { 212 reg_touch_key: regulator-touch-key {
226 compatible = "regulator-fixed" 213 compatible = "regulator-fixed";
227 regulator-name = "touch_key"; 214 regulator-name = "touch_key";
228 regulator-min-microvolt = <280 215 regulator-min-microvolt = <2800000>;
229 regulator-max-microvolt = <280 216 regulator-max-microvolt = <2800000>;
230 217
231 gpio = <&tlmm 56 GPIO_ACTIVE_H 218 gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
232 enable-active-high; 219 enable-active-high;
233 220
234 pinctrl-0 = <&tkey_en_default> 221 pinctrl-0 = <&tkey_en_default>;
235 pinctrl-names = "default"; 222 pinctrl-names = "default";
236 }; 223 };
237 224
238 reg_tsp_vdd: regulator-tsp-vdd { 225 reg_tsp_vdd: regulator-tsp-vdd {
239 compatible = "regulator-fixed" 226 compatible = "regulator-fixed";
240 regulator-name = "tsp_vdd"; 227 regulator-name = "tsp_vdd";
241 regulator-min-microvolt = <180 228 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <180 229 regulator-max-microvolt = <1800000>;
243 vin-supply = <&pm8916_s4>; 230 vin-supply = <&pm8916_s4>;
244 231
245 gpio = <&tlmm 8 GPIO_ACTIVE_HI 232 gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
246 enable-active-high; 233 enable-active-high;
247 234
248 pinctrl-0 = <®_tsp_io_en_de 235 pinctrl-0 = <®_tsp_io_en_default>;
249 pinctrl-names = "default"; 236 pinctrl-names = "default";
250 }; 237 };
251 238
252 reg_vdd_tsp: regulator-vdd-tsp { 239 reg_vdd_tsp: regulator-vdd-tsp {
253 compatible = "regulator-fixed" 240 compatible = "regulator-fixed";
254 regulator-name = "vdd_tsp"; 241 regulator-name = "vdd_tsp";
255 regulator-min-microvolt = <330 242 regulator-min-microvolt = <3300000>;
256 regulator-max-microvolt = <330 243 regulator-max-microvolt = <3300000>;
257 244
258 gpio = <&tlmm 73 GPIO_ACTIVE_H 245 gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
259 enable-active-high; 246 enable-active-high;
260 247
261 pinctrl-0 = <®_tsp_en_defau 248 pinctrl-0 = <®_tsp_en_default>;
262 pinctrl-names = "default"; 249 pinctrl-names = "default";
263 }; 250 };
264 251
265 reg_vibrator: regulator-vibrator { 252 reg_vibrator: regulator-vibrator {
266 compatible = "regulator-fixed" 253 compatible = "regulator-fixed";
267 regulator-name = "motor_en"; 254 regulator-name = "motor_en";
268 regulator-min-microvolt = <300 255 regulator-min-microvolt = <3000000>;
269 regulator-max-microvolt = <300 256 regulator-max-microvolt = <3000000>;
270 257
271 gpio = <&tlmm 86 GPIO_ACTIVE_H 258 gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
272 enable-active-high; 259 enable-active-high;
273 260
274 pinctrl-0 = <&motor_en_default 261 pinctrl-0 = <&motor_en_default>;
275 pinctrl-names = "default"; 262 pinctrl-names = "default";
276 }; 263 };
277 264
278 vibrator { 265 vibrator {
279 compatible = "pwm-vibrator"; 266 compatible = "pwm-vibrator";
280 267
281 pwms = <&pwm_vibrator 0 100000 268 pwms = <&pwm_vibrator 0 100000>;
282 pwm-names = "enable"; 269 pwm-names = "enable";
283 270
284 vcc-supply = <®_vibrator>; 271 vcc-supply = <®_vibrator>;
285 }; 272 };
286 }; 273 };
287 274
288 &blsp_i2c1 { 275 &blsp_i2c1 {
289 status = "okay"; 276 status = "okay";
290 277
291 muic: extcon@25 { 278 muic: extcon@25 {
292 compatible = "siliconmitus,sm5 279 compatible = "siliconmitus,sm5502-muic";
293 reg = <0x25>; 280 reg = <0x25>;
294 281
295 interrupt-parent = <&tlmm>; 282 interrupt-parent = <&tlmm>;
296 interrupts = <12 IRQ_TYPE_EDGE 283 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
297 284
298 pinctrl-0 = <&muic_int_default 285 pinctrl-0 = <&muic_int_default>;
299 pinctrl-names = "default"; 286 pinctrl-names = "default";
300 <<
301 usb_con: connector { <<
302 compatible = "usb-b-co <<
303 label = "micro-USB"; <<
304 type = "micro"; <<
305 }; <<
306 }; <<
307 }; <<
308 <<
309 &blsp_i2c2 { <<
310 status = "okay"; <<
311 <<
312 speaker_codec: audio-codec@34 { <<
313 compatible = "nxp,tfa9895"; <<
314 reg = <0x34>; <<
315 vddd-supply = <&pm8916_l5>; <<
316 sound-name-prefix = "Speaker"; <<
317 #sound-dai-cells = <0>; <<
318 }; 287 };
319 }; 288 };
320 289
321 &blsp_i2c5 { 290 &blsp_i2c5 {
322 status = "okay"; 291 status = "okay";
323 292
324 touchscreen@24 { 293 touchscreen@24 {
325 compatible = "cypress,tt21000" 294 compatible = "cypress,tt21000";
326 295
327 reg = <0x24>; 296 reg = <0x24>;
328 interrupt-parent = <&tlmm>; 297 interrupt-parent = <&tlmm>;
329 interrupts = <13 IRQ_TYPE_EDGE 298 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
330 299
331 vdd-supply = <®_vdd_tsp>; 300 vdd-supply = <®_vdd_tsp>;
332 vddio-supply = <®_tsp_vdd>; 301 vddio-supply = <®_tsp_vdd>;
333 302
334 pinctrl-0 = <&tsp_int_default> 303 pinctrl-0 = <&tsp_int_default>;
335 pinctrl-names = "default"; 304 pinctrl-names = "default";
336 }; 305 };
337 }; 306 };
338 307
339 &blsp_i2c6 { <<
340 status = "okay"; <<
341 <<
342 pmic@34 { <<
343 compatible = "richtek,rt5033"; <<
344 reg = <0x34>; <<
345 <<
346 interrupts-extended = <&tlmm 6 <<
347 <<
348 pinctrl-0 = <&pmic_int_default <<
349 pinctrl-names = "default"; <<
350 <<
351 regulators { <<
352 rt5033_reg_safe_ldo: S <<
353 regulator-min- <<
354 regulator-max- <<
355 regulator-alwa <<
356 }; <<
357 <<
358 /* <<
359 * Needed for camera, <<
360 * Define empty nodes <<
361 * regulators. <<
362 */ <<
363 LDO {}; <<
364 BUCK {}; <<
365 }; <<
366 <<
367 charger: charger { <<
368 compatible = "richtek, <<
369 monitored-battery = <& <<
370 richtek,usb-connector <<
371 }; <<
372 }; <<
373 }; <<
374 <<
375 &blsp_uart2 { 308 &blsp_uart2 {
376 status = "okay"; 309 status = "okay";
377 }; 310 };
378 311
379 /* <<
380 * For some reason the speaker amplifier is co <<
381 * (MI2S_2_D1) instead of the first (MI2S_2_D0 <<
382 * device tree, otherwise audio will seemingly <<
383 * but the speaker stays silent. <<
384 * <<
385 * When routing audio via QDSP6 (the default) <<
386 * the definitions from &q6afedai are used. Wh <<
387 * be alternatively routed directly to the LPA <<
388 * The definitions for &lpass are here for com <<
389 * setup with minor changes to the DT (either <<
390 */ <<
391 &lpass { <<
392 dai-link@3 { <<
393 reg = <MI2S_QUATERNARY>; <<
394 qcom,playback-sd-lines = <1>; <<
395 }; <<
396 }; <<
397 <<
398 &mpss_mem { <<
399 reg = <0x0 0x86800000 0x0 0x5800000>; <<
400 }; <<
401 <<
402 &pm8916_resin { 312 &pm8916_resin {
403 linux,code = <KEY_VOLUMEDOWN>; 313 linux,code = <KEY_VOLUMEDOWN>;
404 status = "okay"; 314 status = "okay";
405 }; 315 };
406 316
407 &pm8916_rpm_regulators { 317 &pm8916_rpm_regulators {
408 pm8916_l17: l17 { 318 pm8916_l17: l17 {
409 regulator-min-microvolt = <285 319 regulator-min-microvolt = <2850000>;
410 regulator-max-microvolt = <285 320 regulator-max-microvolt = <2850000>;
411 }; 321 };
412 }; 322 };
413 323
414 &q6afedai { <<
415 dai@22 { <<
416 reg = <QUATERNARY_MI2S_RX>; <<
417 qcom,sd-lines = <1>; <<
418 }; <<
419 }; <<
420 <<
421 &sdhc_1 { 324 &sdhc_1 {
422 status = "okay"; 325 status = "okay";
423 }; 326 };
424 327
425 &sdhc_2 { 328 &sdhc_2 {
426 pinctrl-0 = <&sdc2_default &sdc2_cd_de 329 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
427 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa 330 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
428 pinctrl-names = "default", "sleep"; 331 pinctrl-names = "default", "sleep";
429 332
430 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 333 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
431 334
432 status = "okay"; 335 status = "okay";
433 }; 336 };
434 337
435 &sound { <<
436 model = "samsung-a2015"; <<
437 audio-routing = <<
438 "AMIC1", "MIC BIAS External1", <<
439 "AMIC2", "MIC BIAS Internal2", <<
440 "AMIC3", "MIC BIAS External1"; <<
441 <<
442 pinctrl-0 = <&cdc_pdm_default &sec_mi2 <<
443 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_ <<
444 pinctrl-names = "default", "sleep"; <<
445 <<
446 sound_link_backend2: backend2-dai-link <<
447 link-name = "Quaternary MI2S"; <<
448 <<
449 cpu { <<
450 sound-dai = <&q6afedai <<
451 }; <<
452 platform { <<
453 sound-dai = <&q6routin <<
454 }; <<
455 codec { <<
456 sound-dai = <&speaker_ <<
457 }; <<
458 }; <<
459 }; <<
460 <<
461 &usb { 338 &usb {
462 extcon = <&muic>, <&muic>; 339 extcon = <&muic>, <&muic>;
463 status = "okay"; 340 status = "okay";
464 }; 341 };
465 342
466 &usb_hs_phy { 343 &usb_hs_phy {
467 extcon = <&muic>; 344 extcon = <&muic>;
468 }; 345 };
469 346
470 &wcnss { 347 &wcnss {
471 status = "okay"; 348 status = "okay";
472 }; 349 };
473 350
474 &wcnss_iris { 351 &wcnss_iris {
475 compatible = "qcom,wcn3660b"; 352 compatible = "qcom,wcn3660b";
476 }; 353 };
477 354
478 &wcnss_mem { 355 &wcnss_mem {
479 status = "okay"; 356 status = "okay";
480 }; 357 };
481 358
482 &tlmm { 359 &tlmm {
483 accel_int_default: accel-int-default-s 360 accel_int_default: accel-int-default-state {
484 pins = "gpio115"; 361 pins = "gpio115";
485 function = "gpio"; 362 function = "gpio";
486 drive-strength = <2>; 363 drive-strength = <2>;
487 bias-disable; 364 bias-disable;
488 }; 365 };
489 366
490 fg_alert_default: fg-alert-default-sta 367 fg_alert_default: fg-alert-default-state {
491 pins = "gpio121"; 368 pins = "gpio121";
492 function = "gpio"; 369 function = "gpio";
493 drive-strength = <2>; 370 drive-strength = <2>;
494 bias-disable; 371 bias-disable;
495 }; 372 };
496 373
497 fg_i2c_default: fg-i2c-default-state { 374 fg_i2c_default: fg-i2c-default-state {
498 pins = "gpio105", "gpio106"; 375 pins = "gpio105", "gpio106";
499 function = "gpio"; 376 function = "gpio";
500 drive-strength = <2>; 377 drive-strength = <2>;
501 bias-disable; 378 bias-disable;
502 }; 379 };
503 380
504 gpio_hall_sensor_default: gpio-hall-se 381 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
505 pins = "gpio52"; 382 pins = "gpio52";
506 function = "gpio"; 383 function = "gpio";
507 drive-strength = <2>; 384 drive-strength = <2>;
508 bias-disable; 385 bias-disable;
509 }; 386 };
510 387
511 gpio_keys_default: gpio-keys-default-s 388 gpio_keys_default: gpio-keys-default-state {
512 pins = "gpio107", "gpio109"; 389 pins = "gpio107", "gpio109";
513 function = "gpio"; 390 function = "gpio";
514 drive-strength = <2>; 391 drive-strength = <2>;
515 bias-pull-up; 392 bias-pull-up;
516 }; 393 };
517 394
518 motor_en_default: motor-en-default-sta 395 motor_en_default: motor-en-default-state {
519 pins = "gpio86"; 396 pins = "gpio86";
520 function = "gpio"; 397 function = "gpio";
521 drive-strength = <2>; 398 drive-strength = <2>;
522 bias-disable; 399 bias-disable;
523 }; 400 };
524 401
525 motor_pwm_default: motor-pwm-default-s 402 motor_pwm_default: motor-pwm-default-state {
526 pins = "gpio50"; 403 pins = "gpio50";
527 function = "gcc_gp2_clk_a"; 404 function = "gcc_gp2_clk_a";
528 }; 405 };
529 406
530 muic_int_default: muic-int-default-sta 407 muic_int_default: muic-int-default-state {
531 pins = "gpio12"; 408 pins = "gpio12";
532 function = "gpio"; 409 function = "gpio";
533 drive-strength = <2>; 410 drive-strength = <2>;
534 bias-disable; 411 bias-disable;
535 }; 412 };
536 413
537 nfc_default: nfc-default-state { 414 nfc_default: nfc-default-state {
538 irq-pins { 415 irq-pins {
539 pins = "gpio21"; 416 pins = "gpio21";
540 function = "gpio"; 417 function = "gpio";
541 drive-strength = <2>; 418 drive-strength = <2>;
542 bias-pull-down; 419 bias-pull-down;
543 }; 420 };
544 421
545 nfc-pins { 422 nfc-pins {
546 pins = "gpio49", "gpio 423 pins = "gpio49", "gpio116";
547 function = "gpio"; 424 function = "gpio";
548 drive-strength = <2>; 425 drive-strength = <2>;
549 bias-disable; 426 bias-disable;
550 }; 427 };
551 }; 428 };
552 429
553 nfc_i2c_default: nfc-i2c-default-state 430 nfc_i2c_default: nfc-i2c-default-state {
554 pins = "gpio0", "gpio1"; 431 pins = "gpio0", "gpio1";
555 function = "gpio"; <<
556 drive-strength = <2>; <<
557 bias-disable; <<
558 }; <<
559 <<
560 pmic_int_default: pmic-int-default-sta <<
561 pins = "gpio62"; <<
562 function = "gpio"; 432 function = "gpio";
563 drive-strength = <2>; 433 drive-strength = <2>;
564 bias-disable; 434 bias-disable;
565 }; 435 };
566 436
567 reg_tsp_en_default: reg-tsp-en-default 437 reg_tsp_en_default: reg-tsp-en-default-state {
568 pins = "gpio73"; 438 pins = "gpio73";
569 function = "gpio"; 439 function = "gpio";
570 drive-strength = <2>; 440 drive-strength = <2>;
571 bias-disable; 441 bias-disable;
572 }; 442 };
573 443
574 reg_tsp_io_en_default: reg-tsp-io-en-d 444 reg_tsp_io_en_default: reg-tsp-io-en-default-state {
575 pins = "gpio8"; 445 pins = "gpio8";
576 function = "gpio"; 446 function = "gpio";
577 drive-strength = <2>; 447 drive-strength = <2>;
578 bias-disable; 448 bias-disable;
579 }; 449 };
580 450
581 sdc2_cd_default: sdc2-cd-default-state 451 sdc2_cd_default: sdc2-cd-default-state {
582 pins = "gpio38"; 452 pins = "gpio38";
583 function = "gpio"; 453 function = "gpio";
584 drive-strength = <2>; 454 drive-strength = <2>;
585 bias-disable; 455 bias-disable;
586 }; 456 };
587 457
588 sensor_i2c_default: sensor-i2c-default 458 sensor_i2c_default: sensor-i2c-default-state {
589 pins = "gpio84", "gpio85"; 459 pins = "gpio84", "gpio85";
590 function = "gpio"; 460 function = "gpio";
591 drive-strength = <2>; 461 drive-strength = <2>;
592 bias-disable; 462 bias-disable;
593 }; 463 };
594 464
595 tkey_default: tkey-default-state { 465 tkey_default: tkey-default-state {
596 pins = "gpio20"; 466 pins = "gpio20";
597 function = "gpio"; 467 function = "gpio";
598 drive-strength = <2>; 468 drive-strength = <2>;
599 bias-disable; 469 bias-disable;
600 }; 470 };
601 471
602 tkey_en_default: tkey-en-default-state 472 tkey_en_default: tkey-en-default-state {
603 pins = "gpio56"; 473 pins = "gpio56";
604 function = "gpio"; 474 function = "gpio";
605 drive-strength = <2>; 475 drive-strength = <2>;
606 bias-disable; 476 bias-disable;
607 }; 477 };
608 478
609 tkey_i2c_default: tkey-i2c-default-sta 479 tkey_i2c_default: tkey-i2c-default-state {
610 pins = "gpio16", "gpio17"; 480 pins = "gpio16", "gpio17";
611 function = "gpio"; 481 function = "gpio";
612 drive-strength = <2>; 482 drive-strength = <2>;
613 bias-disable; 483 bias-disable;
614 }; 484 };
615 485
616 tkey_led_en_default: tkey-led-en-defau 486 tkey_led_en_default: tkey-led-en-default-state {
617 pins = "gpio100"; 487 pins = "gpio100";
618 function = "gpio"; 488 function = "gpio";
619 drive-strength = <2>; 489 drive-strength = <2>;
620 bias-disable; 490 bias-disable;
621 }; 491 };
622 492
623 tsp_int_default: tsp-int-default-state 493 tsp_int_default: tsp-int-default-state {
624 pins = "gpio13"; 494 pins = "gpio13";
625 function = "gpio"; 495 function = "gpio";
626 drive-strength = <2>; 496 drive-strength = <2>;
627 bias-disable; 497 bias-disable;
628 }; 498 };
629 }; 499 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.