1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8939-pm8916.dtsi" 5 #include "msm8939-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" 6 #include "msm8916-modem-qdsp6.dtsi"
7 7
8 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq 10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/sound/apq8016-lpass.h> 11 #include <dt-bindings/sound/apq8016-lpass.h>
12 12
13 / { 13 / {
14 model = "Samsung Galaxy A7 (2015)"; 14 model = "Samsung Galaxy A7 (2015)";
15 compatible = "samsung,a7", "qcom,msm89 15 compatible = "samsung,a7", "qcom,msm8939";
16 chassis-type = "handset"; 16 chassis-type = "handset";
17 17
18 aliases { 18 aliases {
19 mmc0 = &sdhc_1; /* SDC1 eMMC s 19 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
20 mmc1 = &sdhc_2; /* SDC2 SD car 20 mmc1 = &sdhc_2; /* SDC2 SD card slot */
21 serial0 = &blsp_uart2; 21 serial0 = &blsp_uart2;
22 }; 22 };
23 23
24 chosen { 24 chosen {
25 stdout-path = "serial0"; 25 stdout-path = "serial0";
26 }; 26 };
27 27
28 reserved-memory { 28 reserved-memory {
29 /* Additional memory used by S 29 /* Additional memory used by Samsung firmware modifications */
30 tz-apps@85500000 { 30 tz-apps@85500000 {
31 reg = <0x0 0x85500000 31 reg = <0x0 0x85500000 0x0 0xb00000>;
32 no-map; 32 no-map;
33 }; 33 };
34 }; 34 };
35 35
36 battery: battery { 36 battery: battery {
37 compatible = "simple-battery"; 37 compatible = "simple-battery";
38 charge-term-current-microamp = 38 charge-term-current-microamp = <150000>;
39 constant-charge-current-max-mi 39 constant-charge-current-max-microamp = <1500000>;
40 constant-charge-voltage-max-mi 40 constant-charge-voltage-max-microvolt = <4300000>;
41 precharge-current-microamp = < 41 precharge-current-microamp = <450000>;
42 precharge-upper-limit-microvol 42 precharge-upper-limit-microvolt = <3500000>;
43 }; 43 };
44 44
45 gpio-hall-sensor { 45 gpio-hall-sensor {
46 compatible = "gpio-keys"; 46 compatible = "gpio-keys";
47 47
48 pinctrl-0 = <&gpio_hall_sensor 48 pinctrl-0 = <&gpio_hall_sensor_default>;
49 pinctrl-names = "default"; 49 pinctrl-names = "default";
50 50
51 label = "GPIO Hall Effect Sens 51 label = "GPIO Hall Effect Sensor";
52 52
53 event-hall-sensor { 53 event-hall-sensor {
54 label = "Hall Effect S 54 label = "Hall Effect Sensor";
55 gpios = <&tlmm 52 GPIO 55 gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
56 linux,input-type = <EV 56 linux,input-type = <EV_SW>;
57 linux,code = <SW_LID>; 57 linux,code = <SW_LID>;
58 linux,can-disable; 58 linux,can-disable;
59 }; 59 };
60 }; 60 };
61 61
62 gpio-keys { 62 gpio-keys {
63 compatible = "gpio-keys"; 63 compatible = "gpio-keys";
64 64
65 pinctrl-0 = <&gpio_keys_defaul 65 pinctrl-0 = <&gpio_keys_default>;
66 pinctrl-names = "default"; 66 pinctrl-names = "default";
67 67
68 label = "GPIO Buttons"; 68 label = "GPIO Buttons";
69 69
70 button-volume-up { 70 button-volume-up {
71 label = "Volume Up"; 71 label = "Volume Up";
72 gpios = <&tlmm 107 GPI 72 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
73 linux,code = <KEY_VOLU 73 linux,code = <KEY_VOLUMEUP>;
74 }; 74 };
75 75
76 button-home { 76 button-home {
77 label = "Home"; 77 label = "Home";
78 gpios = <&tlmm 109 GPI 78 gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
79 linux,code = <KEY_HOME 79 linux,code = <KEY_HOMEPAGE>;
80 }; 80 };
81 }; 81 };
82 82
83 i2c-fg { 83 i2c-fg {
84 compatible = "i2c-gpio"; 84 compatible = "i2c-gpio";
85 sda-gpios = <&tlmm 106 (GPIO_A 85 sda-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
86 scl-gpios = <&tlmm 105 (GPIO_A 86 scl-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
87 87
88 pinctrl-0 = <&fg_i2c_default>; 88 pinctrl-0 = <&fg_i2c_default>;
89 pinctrl-names = "default"; 89 pinctrl-names = "default";
90 90
91 #address-cells = <1>; 91 #address-cells = <1>;
92 #size-cells = <0>; 92 #size-cells = <0>;
93 93
94 fuel-gauge@35 { 94 fuel-gauge@35 {
95 compatible = "richtek, 95 compatible = "richtek,rt5033-battery";
96 reg = <0x35>; 96 reg = <0x35>;
97 97
98 interrupt-parent = <&t 98 interrupt-parent = <&tlmm>;
99 interrupts = <121 IRQ_ 99 interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
100 100
101 pinctrl-0 = <&fg_alert 101 pinctrl-0 = <&fg_alert_default>;
102 pinctrl-names = "defau 102 pinctrl-names = "default";
103 103
104 power-supplies = <&cha 104 power-supplies = <&charger>;
105 }; 105 };
106 }; 106 };
107 107
108 i2c-nfc { 108 i2c-nfc {
109 compatible = "i2c-gpio"; 109 compatible = "i2c-gpio";
110 sda-gpios = <&tlmm 0 (GPIO_ACT 110 sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
111 scl-gpios = <&tlmm 1 (GPIO_ACT 111 scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
112 112
113 pinctrl-0 = <&nfc_i2c_default> 113 pinctrl-0 = <&nfc_i2c_default>;
114 pinctrl-names = "default"; 114 pinctrl-names = "default";
115 115
116 #address-cells = <1>; 116 #address-cells = <1>;
117 #size-cells = <0>; 117 #size-cells = <0>;
118 118
119 nfc@2b { 119 nfc@2b {
120 compatible = "nxp,pn54 120 compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
121 reg = <0x2b>; 121 reg = <0x2b>;
122 122
123 interrupt-parent = <&t 123 interrupt-parent = <&tlmm>;
124 interrupts = <21 IRQ_T 124 interrupts = <21 IRQ_TYPE_EDGE_RISING>;
125 125
126 enable-gpios = <&tlmm 126 enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
127 firmware-gpios = <&tlm 127 firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
128 128
129 pinctrl-0 = <&nfc_defa 129 pinctrl-0 = <&nfc_default>;
130 pinctrl-names = "defau 130 pinctrl-names = "default";
131 }; 131 };
132 }; 132 };
133 133
134 i2c-sensor { 134 i2c-sensor {
135 compatible = "i2c-gpio"; 135 compatible = "i2c-gpio";
136 sda-gpios = <&tlmm 84 (GPIO_AC 136 sda-gpios = <&tlmm 84 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
137 scl-gpios = <&tlmm 85 (GPIO_AC 137 scl-gpios = <&tlmm 85 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
138 138
139 pinctrl-0 = <&sensor_i2c_defau 139 pinctrl-0 = <&sensor_i2c_default>;
140 pinctrl-names = "default"; 140 pinctrl-names = "default";
141 141
142 #address-cells = <1>; 142 #address-cells = <1>;
143 #size-cells = <0>; 143 #size-cells = <0>;
144 144
145 accelerometer: accelerometer@1 145 accelerometer: accelerometer@10 {
146 compatible = "bosch,bm 146 compatible = "bosch,bmc150_accel";
147 reg = <0x10>; 147 reg = <0x10>;
148 interrupt-parent = <&t 148 interrupt-parent = <&tlmm>;
149 interrupts = <115 IRQ_ 149 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
150 150
151 vdd-supply = <&pm8916_ 151 vdd-supply = <&pm8916_l17>;
152 vddio-supply = <&pm891 152 vddio-supply = <&pm8916_l5>;
153 153
154 pinctrl-0 = <&accel_in 154 pinctrl-0 = <&accel_int_default>;
155 pinctrl-names = "defau 155 pinctrl-names = "default";
156 156
157 mount-matrix = "-1", " 157 mount-matrix = "-1", "0", "0",
158 "0", " 158 "0", "-1", "0",
159 "0", " 159 "0", "0", "1";
160 }; 160 };
161 161
162 magnetometer@12 { 162 magnetometer@12 {
163 compatible = "bosch,bm 163 compatible = "bosch,bmc150_magn";
164 reg = <0x12>; 164 reg = <0x12>;
165 165
166 vdd-supply = <&pm8916_ 166 vdd-supply = <&pm8916_l17>;
167 vddio-supply = <&pm891 167 vddio-supply = <&pm8916_l5>;
168 }; 168 };
169 }; 169 };
170 170
171 i2c-tkey { 171 i2c-tkey {
172 compatible = "i2c-gpio"; 172 compatible = "i2c-gpio";
173 sda-gpios = <&tlmm 16 (GPIO_AC 173 sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
174 scl-gpios = <&tlmm 17 (GPIO_AC 174 scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
175 175
176 pinctrl-0 = <&tkey_i2c_default 176 pinctrl-0 = <&tkey_i2c_default>;
177 pinctrl-names = "default"; 177 pinctrl-names = "default";
178 178
179 #address-cells = <1>; 179 #address-cells = <1>;
180 #size-cells = <0>; 180 #size-cells = <0>;
181 181
182 touchkey@20 { 182 touchkey@20 {
183 /* Note: Actually an A 183 /* Note: Actually an ABOV MCU that implements same interface */
184 compatible = "corerive 184 compatible = "coreriver,tc360-touchkey";
185 reg = <0x20>; 185 reg = <0x20>;
186 186
187 interrupt-parent = <&t 187 interrupt-parent = <&tlmm>;
188 interrupts = <20 IRQ_T 188 interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
189 189
190 vcc-supply = <®_tou 190 vcc-supply = <®_touch_key>;
191 vdd-supply = <®_key 191 vdd-supply = <®_keyled>;
192 vddio-supply = <&pm891 192 vddio-supply = <&pm8916_l6>;
193 193
194 linux,keycodes = <KEY_ 194 linux,keycodes = <KEY_APPSELECT KEY_BACK>;
195 195
196 pinctrl-0 = <&tkey_def 196 pinctrl-0 = <&tkey_default>;
197 pinctrl-names = "defau 197 pinctrl-names = "default";
198 }; 198 };
199 }; 199 };
200 200
201 pwm_vibrator: pwm { 201 pwm_vibrator: pwm {
202 compatible = "clk-pwm"; 202 compatible = "clk-pwm";
203 #pwm-cells = <2>; 203 #pwm-cells = <2>;
204 204
205 clocks = <&gcc GCC_GP2_CLK>; 205 clocks = <&gcc GCC_GP2_CLK>;
206 206
207 pinctrl-0 = <&motor_pwm_defaul 207 pinctrl-0 = <&motor_pwm_default>;
208 pinctrl-names = "default"; 208 pinctrl-names = "default";
209 }; 209 };
210 210
211 reg_keyled: regulator-keyled { 211 reg_keyled: regulator-keyled {
212 compatible = "regulator-fixed" 212 compatible = "regulator-fixed";
213 regulator-name = "keyled"; 213 regulator-name = "keyled";
214 regulator-min-microvolt = <330 214 regulator-min-microvolt = <3300000>;
215 regulator-max-microvolt = <330 215 regulator-max-microvolt = <3300000>;
216 216
217 /* NOTE: On some variants e.g. 217 /* NOTE: On some variants e.g. SM-A700FD it's GPIO 91 */
218 gpio = <&tlmm 100 GPIO_ACTIVE_ 218 gpio = <&tlmm 100 GPIO_ACTIVE_HIGH>;
219 enable-active-high; 219 enable-active-high;
220 220
221 pinctrl-0 = <&tkey_led_en_defa 221 pinctrl-0 = <&tkey_led_en_default>;
222 pinctrl-names = "default"; 222 pinctrl-names = "default";
223 }; 223 };
224 224
225 reg_touch_key: regulator-touch-key { 225 reg_touch_key: regulator-touch-key {
226 compatible = "regulator-fixed" 226 compatible = "regulator-fixed";
227 regulator-name = "touch_key"; 227 regulator-name = "touch_key";
228 regulator-min-microvolt = <280 228 regulator-min-microvolt = <2800000>;
229 regulator-max-microvolt = <280 229 regulator-max-microvolt = <2800000>;
230 230
231 gpio = <&tlmm 56 GPIO_ACTIVE_H 231 gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
232 enable-active-high; 232 enable-active-high;
233 233
234 pinctrl-0 = <&tkey_en_default> 234 pinctrl-0 = <&tkey_en_default>;
235 pinctrl-names = "default"; 235 pinctrl-names = "default";
236 }; 236 };
237 237
238 reg_tsp_vdd: regulator-tsp-vdd { 238 reg_tsp_vdd: regulator-tsp-vdd {
239 compatible = "regulator-fixed" 239 compatible = "regulator-fixed";
240 regulator-name = "tsp_vdd"; 240 regulator-name = "tsp_vdd";
241 regulator-min-microvolt = <180 241 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <180 242 regulator-max-microvolt = <1800000>;
243 vin-supply = <&pm8916_s4>; 243 vin-supply = <&pm8916_s4>;
244 244
245 gpio = <&tlmm 8 GPIO_ACTIVE_HI 245 gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
246 enable-active-high; 246 enable-active-high;
247 247
248 pinctrl-0 = <®_tsp_io_en_de 248 pinctrl-0 = <®_tsp_io_en_default>;
249 pinctrl-names = "default"; 249 pinctrl-names = "default";
250 }; 250 };
251 251
252 reg_vdd_tsp: regulator-vdd-tsp { 252 reg_vdd_tsp: regulator-vdd-tsp {
253 compatible = "regulator-fixed" 253 compatible = "regulator-fixed";
254 regulator-name = "vdd_tsp"; 254 regulator-name = "vdd_tsp";
255 regulator-min-microvolt = <330 255 regulator-min-microvolt = <3300000>;
256 regulator-max-microvolt = <330 256 regulator-max-microvolt = <3300000>;
257 257
258 gpio = <&tlmm 73 GPIO_ACTIVE_H 258 gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
259 enable-active-high; 259 enable-active-high;
260 260
261 pinctrl-0 = <®_tsp_en_defau 261 pinctrl-0 = <®_tsp_en_default>;
262 pinctrl-names = "default"; 262 pinctrl-names = "default";
263 }; 263 };
264 264
265 reg_vibrator: regulator-vibrator { 265 reg_vibrator: regulator-vibrator {
266 compatible = "regulator-fixed" 266 compatible = "regulator-fixed";
267 regulator-name = "motor_en"; 267 regulator-name = "motor_en";
268 regulator-min-microvolt = <300 268 regulator-min-microvolt = <3000000>;
269 regulator-max-microvolt = <300 269 regulator-max-microvolt = <3000000>;
270 270
271 gpio = <&tlmm 86 GPIO_ACTIVE_H 271 gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
272 enable-active-high; 272 enable-active-high;
273 273
274 pinctrl-0 = <&motor_en_default 274 pinctrl-0 = <&motor_en_default>;
275 pinctrl-names = "default"; 275 pinctrl-names = "default";
276 }; 276 };
277 277
278 vibrator { 278 vibrator {
279 compatible = "pwm-vibrator"; 279 compatible = "pwm-vibrator";
280 280
281 pwms = <&pwm_vibrator 0 100000 281 pwms = <&pwm_vibrator 0 100000>;
282 pwm-names = "enable"; 282 pwm-names = "enable";
283 283
284 vcc-supply = <®_vibrator>; 284 vcc-supply = <®_vibrator>;
285 }; 285 };
286 }; 286 };
287 287
288 &blsp_i2c1 { 288 &blsp_i2c1 {
289 status = "okay"; 289 status = "okay";
290 290
291 muic: extcon@25 { 291 muic: extcon@25 {
292 compatible = "siliconmitus,sm5 292 compatible = "siliconmitus,sm5502-muic";
293 reg = <0x25>; 293 reg = <0x25>;
294 294
295 interrupt-parent = <&tlmm>; 295 interrupt-parent = <&tlmm>;
296 interrupts = <12 IRQ_TYPE_EDGE 296 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
297 297
298 pinctrl-0 = <&muic_int_default 298 pinctrl-0 = <&muic_int_default>;
299 pinctrl-names = "default"; 299 pinctrl-names = "default";
300 300
301 usb_con: connector { 301 usb_con: connector {
302 compatible = "usb-b-co 302 compatible = "usb-b-connector";
303 label = "micro-USB"; 303 label = "micro-USB";
304 type = "micro"; 304 type = "micro";
305 }; 305 };
306 }; 306 };
307 }; 307 };
308 308
309 &blsp_i2c2 { 309 &blsp_i2c2 {
310 status = "okay"; 310 status = "okay";
311 311
312 speaker_codec: audio-codec@34 { 312 speaker_codec: audio-codec@34 {
313 compatible = "nxp,tfa9895"; 313 compatible = "nxp,tfa9895";
314 reg = <0x34>; 314 reg = <0x34>;
315 vddd-supply = <&pm8916_l5>; 315 vddd-supply = <&pm8916_l5>;
316 sound-name-prefix = "Speaker"; 316 sound-name-prefix = "Speaker";
317 #sound-dai-cells = <0>; 317 #sound-dai-cells = <0>;
318 }; 318 };
319 }; 319 };
320 320
321 &blsp_i2c5 { 321 &blsp_i2c5 {
322 status = "okay"; 322 status = "okay";
323 323
324 touchscreen@24 { 324 touchscreen@24 {
325 compatible = "cypress,tt21000" 325 compatible = "cypress,tt21000";
326 326
327 reg = <0x24>; 327 reg = <0x24>;
328 interrupt-parent = <&tlmm>; 328 interrupt-parent = <&tlmm>;
329 interrupts = <13 IRQ_TYPE_EDGE 329 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
330 330
331 vdd-supply = <®_vdd_tsp>; 331 vdd-supply = <®_vdd_tsp>;
332 vddio-supply = <®_tsp_vdd>; 332 vddio-supply = <®_tsp_vdd>;
333 333
334 pinctrl-0 = <&tsp_int_default> 334 pinctrl-0 = <&tsp_int_default>;
335 pinctrl-names = "default"; 335 pinctrl-names = "default";
336 }; 336 };
337 }; 337 };
338 338
339 &blsp_i2c6 { 339 &blsp_i2c6 {
340 status = "okay"; 340 status = "okay";
341 341
342 pmic@34 { 342 pmic@34 {
343 compatible = "richtek,rt5033"; 343 compatible = "richtek,rt5033";
344 reg = <0x34>; 344 reg = <0x34>;
345 345
346 interrupts-extended = <&tlmm 6 346 interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
347 347
348 pinctrl-0 = <&pmic_int_default 348 pinctrl-0 = <&pmic_int_default>;
349 pinctrl-names = "default"; 349 pinctrl-names = "default";
350 350
351 regulators { 351 regulators {
352 rt5033_reg_safe_ldo: S 352 rt5033_reg_safe_ldo: SAFE_LDO {
353 regulator-min- 353 regulator-min-microvolt = <4900000>;
354 regulator-max- 354 regulator-max-microvolt = <4900000>;
355 regulator-alwa 355 regulator-always-on;
356 }; 356 };
357 357
358 /* 358 /*
359 * Needed for camera, 359 * Needed for camera, but not used yet.
360 * Define empty nodes 360 * Define empty nodes to allow disabling the unused
361 * regulators. 361 * regulators.
362 */ 362 */
363 LDO {}; 363 LDO {};
364 BUCK {}; 364 BUCK {};
365 }; 365 };
366 366
367 charger: charger { 367 charger: charger {
368 compatible = "richtek, 368 compatible = "richtek,rt5033-charger";
369 monitored-battery = <& 369 monitored-battery = <&battery>;
370 richtek,usb-connector 370 richtek,usb-connector = <&usb_con>;
371 }; 371 };
372 }; 372 };
373 }; 373 };
374 374
375 &blsp_uart2 { 375 &blsp_uart2 {
376 status = "okay"; 376 status = "okay";
377 }; 377 };
378 378
379 /* 379 /*
380 * For some reason the speaker amplifier is co 380 * For some reason the speaker amplifier is connected to the second SD line
381 * (MI2S_2_D1) instead of the first (MI2S_2_D0 381 * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
382 * device tree, otherwise audio will seemingly 382 * device tree, otherwise audio will seemingly play fine on the wrong SD line
383 * but the speaker stays silent. 383 * but the speaker stays silent.
384 * 384 *
385 * When routing audio via QDSP6 (the default) 385 * When routing audio via QDSP6 (the default) the &lpass node is reserved and
386 * the definitions from &q6afedai are used. Wh 386 * the definitions from &q6afedai are used. When the modem is disabled audio can
387 * be alternatively routed directly to the LPA 387 * be alternatively routed directly to the LPASS hardware with reduced latency.
388 * The definitions for &lpass are here for com 388 * The definitions for &lpass are here for completeness to simplify changing the
389 * setup with minor changes to the DT (either 389 * setup with minor changes to the DT (either manually or with DT overlays).
390 */ 390 */
391 &lpass { 391 &lpass {
392 dai-link@3 { 392 dai-link@3 {
393 reg = <MI2S_QUATERNARY>; 393 reg = <MI2S_QUATERNARY>;
394 qcom,playback-sd-lines = <1>; 394 qcom,playback-sd-lines = <1>;
395 }; 395 };
396 }; 396 };
397 397
398 &mpss_mem { 398 &mpss_mem {
399 reg = <0x0 0x86800000 0x0 0x5800000>; 399 reg = <0x0 0x86800000 0x0 0x5800000>;
400 }; 400 };
401 401
402 &pm8916_resin { 402 &pm8916_resin {
403 linux,code = <KEY_VOLUMEDOWN>; 403 linux,code = <KEY_VOLUMEDOWN>;
404 status = "okay"; 404 status = "okay";
405 }; 405 };
406 406
407 &pm8916_rpm_regulators { 407 &pm8916_rpm_regulators {
408 pm8916_l17: l17 { 408 pm8916_l17: l17 {
409 regulator-min-microvolt = <285 409 regulator-min-microvolt = <2850000>;
410 regulator-max-microvolt = <285 410 regulator-max-microvolt = <2850000>;
411 }; 411 };
412 }; 412 };
413 413
414 &q6afedai { 414 &q6afedai {
415 dai@22 { 415 dai@22 {
416 reg = <QUATERNARY_MI2S_RX>; 416 reg = <QUATERNARY_MI2S_RX>;
417 qcom,sd-lines = <1>; 417 qcom,sd-lines = <1>;
418 }; 418 };
419 }; 419 };
420 420
421 &sdhc_1 { 421 &sdhc_1 {
422 status = "okay"; 422 status = "okay";
423 }; 423 };
424 424
425 &sdhc_2 { 425 &sdhc_2 {
426 pinctrl-0 = <&sdc2_default &sdc2_cd_de 426 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
427 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa 427 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
428 pinctrl-names = "default", "sleep"; 428 pinctrl-names = "default", "sleep";
429 429
430 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 430 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
431 431
432 status = "okay"; 432 status = "okay";
433 }; 433 };
434 434
435 &sound { 435 &sound {
436 model = "samsung-a2015"; 436 model = "samsung-a2015";
437 audio-routing = 437 audio-routing =
438 "AMIC1", "MIC BIAS External1", 438 "AMIC1", "MIC BIAS External1",
439 "AMIC2", "MIC BIAS Internal2", 439 "AMIC2", "MIC BIAS Internal2",
440 "AMIC3", "MIC BIAS External1"; 440 "AMIC3", "MIC BIAS External1";
441 441
442 pinctrl-0 = <&cdc_pdm_default &sec_mi2 442 pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
443 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_ 443 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
444 pinctrl-names = "default", "sleep"; 444 pinctrl-names = "default", "sleep";
445 445
446 sound_link_backend2: backend2-dai-link 446 sound_link_backend2: backend2-dai-link {
447 link-name = "Quaternary MI2S"; 447 link-name = "Quaternary MI2S";
448 448
449 cpu { 449 cpu {
450 sound-dai = <&q6afedai 450 sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
451 }; 451 };
452 platform { 452 platform {
453 sound-dai = <&q6routin 453 sound-dai = <&q6routing>;
454 }; 454 };
455 codec { 455 codec {
456 sound-dai = <&speaker_ 456 sound-dai = <&speaker_codec>;
457 }; 457 };
458 }; 458 };
459 }; 459 };
460 460
461 &usb { 461 &usb {
462 extcon = <&muic>, <&muic>; 462 extcon = <&muic>, <&muic>;
463 status = "okay"; 463 status = "okay";
464 }; 464 };
465 465
466 &usb_hs_phy { 466 &usb_hs_phy {
467 extcon = <&muic>; 467 extcon = <&muic>;
468 }; 468 };
469 469
470 &wcnss { 470 &wcnss {
471 status = "okay"; 471 status = "okay";
472 }; 472 };
473 473
474 &wcnss_iris { 474 &wcnss_iris {
475 compatible = "qcom,wcn3660b"; 475 compatible = "qcom,wcn3660b";
476 }; 476 };
477 477
478 &wcnss_mem { 478 &wcnss_mem {
479 status = "okay"; 479 status = "okay";
480 }; 480 };
481 481
482 &tlmm { 482 &tlmm {
483 accel_int_default: accel-int-default-s 483 accel_int_default: accel-int-default-state {
484 pins = "gpio115"; 484 pins = "gpio115";
485 function = "gpio"; 485 function = "gpio";
486 drive-strength = <2>; 486 drive-strength = <2>;
487 bias-disable; 487 bias-disable;
488 }; 488 };
489 489
490 fg_alert_default: fg-alert-default-sta 490 fg_alert_default: fg-alert-default-state {
491 pins = "gpio121"; 491 pins = "gpio121";
492 function = "gpio"; 492 function = "gpio";
493 drive-strength = <2>; 493 drive-strength = <2>;
494 bias-disable; 494 bias-disable;
495 }; 495 };
496 496
497 fg_i2c_default: fg-i2c-default-state { 497 fg_i2c_default: fg-i2c-default-state {
498 pins = "gpio105", "gpio106"; 498 pins = "gpio105", "gpio106";
499 function = "gpio"; 499 function = "gpio";
500 drive-strength = <2>; 500 drive-strength = <2>;
501 bias-disable; 501 bias-disable;
502 }; 502 };
503 503
504 gpio_hall_sensor_default: gpio-hall-se 504 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
505 pins = "gpio52"; 505 pins = "gpio52";
506 function = "gpio"; 506 function = "gpio";
507 drive-strength = <2>; 507 drive-strength = <2>;
508 bias-disable; 508 bias-disable;
509 }; 509 };
510 510
511 gpio_keys_default: gpio-keys-default-s 511 gpio_keys_default: gpio-keys-default-state {
512 pins = "gpio107", "gpio109"; 512 pins = "gpio107", "gpio109";
513 function = "gpio"; 513 function = "gpio";
514 drive-strength = <2>; 514 drive-strength = <2>;
515 bias-pull-up; 515 bias-pull-up;
516 }; 516 };
517 517
518 motor_en_default: motor-en-default-sta 518 motor_en_default: motor-en-default-state {
519 pins = "gpio86"; 519 pins = "gpio86";
520 function = "gpio"; 520 function = "gpio";
521 drive-strength = <2>; 521 drive-strength = <2>;
522 bias-disable; 522 bias-disable;
523 }; 523 };
524 524
525 motor_pwm_default: motor-pwm-default-s 525 motor_pwm_default: motor-pwm-default-state {
526 pins = "gpio50"; 526 pins = "gpio50";
527 function = "gcc_gp2_clk_a"; 527 function = "gcc_gp2_clk_a";
528 }; 528 };
529 529
530 muic_int_default: muic-int-default-sta 530 muic_int_default: muic-int-default-state {
531 pins = "gpio12"; 531 pins = "gpio12";
532 function = "gpio"; 532 function = "gpio";
533 drive-strength = <2>; 533 drive-strength = <2>;
534 bias-disable; 534 bias-disable;
535 }; 535 };
536 536
537 nfc_default: nfc-default-state { 537 nfc_default: nfc-default-state {
538 irq-pins { 538 irq-pins {
539 pins = "gpio21"; 539 pins = "gpio21";
540 function = "gpio"; 540 function = "gpio";
541 drive-strength = <2>; 541 drive-strength = <2>;
542 bias-pull-down; 542 bias-pull-down;
543 }; 543 };
544 544
545 nfc-pins { 545 nfc-pins {
546 pins = "gpio49", "gpio 546 pins = "gpio49", "gpio116";
547 function = "gpio"; 547 function = "gpio";
548 drive-strength = <2>; 548 drive-strength = <2>;
549 bias-disable; 549 bias-disable;
550 }; 550 };
551 }; 551 };
552 552
553 nfc_i2c_default: nfc-i2c-default-state 553 nfc_i2c_default: nfc-i2c-default-state {
554 pins = "gpio0", "gpio1"; 554 pins = "gpio0", "gpio1";
555 function = "gpio"; 555 function = "gpio";
556 drive-strength = <2>; 556 drive-strength = <2>;
557 bias-disable; 557 bias-disable;
558 }; 558 };
559 559
560 pmic_int_default: pmic-int-default-sta 560 pmic_int_default: pmic-int-default-state {
561 pins = "gpio62"; 561 pins = "gpio62";
562 function = "gpio"; 562 function = "gpio";
563 drive-strength = <2>; 563 drive-strength = <2>;
564 bias-disable; 564 bias-disable;
565 }; 565 };
566 566
567 reg_tsp_en_default: reg-tsp-en-default 567 reg_tsp_en_default: reg-tsp-en-default-state {
568 pins = "gpio73"; 568 pins = "gpio73";
569 function = "gpio"; 569 function = "gpio";
570 drive-strength = <2>; 570 drive-strength = <2>;
571 bias-disable; 571 bias-disable;
572 }; 572 };
573 573
574 reg_tsp_io_en_default: reg-tsp-io-en-d 574 reg_tsp_io_en_default: reg-tsp-io-en-default-state {
575 pins = "gpio8"; 575 pins = "gpio8";
576 function = "gpio"; 576 function = "gpio";
577 drive-strength = <2>; 577 drive-strength = <2>;
578 bias-disable; 578 bias-disable;
579 }; 579 };
580 580
581 sdc2_cd_default: sdc2-cd-default-state 581 sdc2_cd_default: sdc2-cd-default-state {
582 pins = "gpio38"; 582 pins = "gpio38";
583 function = "gpio"; 583 function = "gpio";
584 drive-strength = <2>; 584 drive-strength = <2>;
585 bias-disable; 585 bias-disable;
586 }; 586 };
587 587
588 sensor_i2c_default: sensor-i2c-default 588 sensor_i2c_default: sensor-i2c-default-state {
589 pins = "gpio84", "gpio85"; 589 pins = "gpio84", "gpio85";
590 function = "gpio"; 590 function = "gpio";
591 drive-strength = <2>; 591 drive-strength = <2>;
592 bias-disable; 592 bias-disable;
593 }; 593 };
594 594
595 tkey_default: tkey-default-state { 595 tkey_default: tkey-default-state {
596 pins = "gpio20"; 596 pins = "gpio20";
597 function = "gpio"; 597 function = "gpio";
598 drive-strength = <2>; 598 drive-strength = <2>;
599 bias-disable; 599 bias-disable;
600 }; 600 };
601 601
602 tkey_en_default: tkey-en-default-state 602 tkey_en_default: tkey-en-default-state {
603 pins = "gpio56"; 603 pins = "gpio56";
604 function = "gpio"; 604 function = "gpio";
605 drive-strength = <2>; 605 drive-strength = <2>;
606 bias-disable; 606 bias-disable;
607 }; 607 };
608 608
609 tkey_i2c_default: tkey-i2c-default-sta 609 tkey_i2c_default: tkey-i2c-default-state {
610 pins = "gpio16", "gpio17"; 610 pins = "gpio16", "gpio17";
611 function = "gpio"; 611 function = "gpio";
612 drive-strength = <2>; 612 drive-strength = <2>;
613 bias-disable; 613 bias-disable;
614 }; 614 };
615 615
616 tkey_led_en_default: tkey-led-en-defau 616 tkey_led_en_default: tkey-led-en-default-state {
617 pins = "gpio100"; 617 pins = "gpio100";
618 function = "gpio"; 618 function = "gpio";
619 drive-strength = <2>; 619 drive-strength = <2>;
620 bias-disable; 620 bias-disable;
621 }; 621 };
622 622
623 tsp_int_default: tsp-int-default-state 623 tsp_int_default: tsp-int-default-state {
624 pins = "gpio13"; 624 pins = "gpio13";
625 function = "gpio"; 625 function = "gpio";
626 drive-strength = <2>; 626 drive-strength = <2>;
627 bias-disable; 627 bias-disable;
628 }; 628 };
629 }; 629 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.