1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 /* !! 2 /* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
3 * Copyright (c) 2013-2016, The Linux Foundati <<
4 */ 3 */
5 4
6 #include <dt-bindings/interrupt-controller/arm 5 #include <dt-bindings/interrupt-controller/arm-gic.h>
7 #include <dt-bindings/clock/qcom,gcc-msm8994.h 6 #include <dt-bindings/clock/qcom,gcc-msm8994.h>
8 #include <dt-bindings/clock/qcom,mmcc-msm8994. <<
9 #include <dt-bindings/clock/qcom,rpmcc.h> <<
10 #include <dt-bindings/gpio/gpio.h> <<
11 #include <dt-bindings/power/qcom-rpmpd.h> <<
12 7
13 / { 8 / {
>> 9 model = "Qualcomm Technologies, Inc. MSM 8994";
>> 10 compatible = "qcom,msm8994";
>> 11 // msm-id and pmic-id are required by bootloader for
>> 12 // proper selection of dt blob
>> 13 qcom,msm-id = <207 0x20000>;
>> 14 qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
14 interrupt-parent = <&intc>; 15 interrupt-parent = <&intc>;
15 16
16 #address-cells = <2>; 17 #address-cells = <2>;
17 #size-cells = <2>; 18 #size-cells = <2>;
18 19
19 aliases { <<
20 mmc1 = &sdhc1; <<
21 mmc2 = &sdhc2; <<
22 }; <<
23 <<
24 chosen { }; 20 chosen { };
25 21
26 clocks { <<
27 xo_board: xo-board { <<
28 compatible = "fixed-cl <<
29 #clock-cells = <0>; <<
30 clock-frequency = <192 <<
31 clock-output-names = " <<
32 }; <<
33 <<
34 sleep_clk: sleep-clk { <<
35 compatible = "fixed-cl <<
36 #clock-cells = <0>; <<
37 clock-frequency = <327 <<
38 clock-output-names = " <<
39 }; <<
40 }; <<
41 <<
42 cpus { 22 cpus {
43 #address-cells = <2>; !! 23 #address-cells = <1>;
44 #size-cells = <0>; 24 #size-cells = <0>;
45 <<
46 CPU0: cpu@0 { <<
47 device_type = "cpu"; <<
48 compatible = "arm,cort <<
49 reg = <0x0 0x0>; <<
50 enable-method = "psci" <<
51 next-level-cache = <&L <<
52 L2_0: l2-cache { <<
53 compatible = " <<
54 cache-level = <<
55 cache-unified; <<
56 }; <<
57 }; <<
58 <<
59 CPU1: cpu@1 { <<
60 device_type = "cpu"; <<
61 compatible = "arm,cort <<
62 reg = <0x0 0x1>; <<
63 enable-method = "psci" <<
64 next-level-cache = <&L <<
65 }; <<
66 <<
67 CPU2: cpu@2 { <<
68 device_type = "cpu"; <<
69 compatible = "arm,cort <<
70 reg = <0x0 0x2>; <<
71 enable-method = "psci" <<
72 next-level-cache = <&L <<
73 }; <<
74 <<
75 CPU3: cpu@3 { <<
76 device_type = "cpu"; <<
77 compatible = "arm,cort <<
78 reg = <0x0 0x3>; <<
79 enable-method = "psci" <<
80 next-level-cache = <&L <<
81 }; <<
82 <<
83 CPU4: cpu@100 { <<
84 device_type = "cpu"; <<
85 compatible = "arm,cort <<
86 reg = <0x0 0x100>; <<
87 enable-method = "psci" <<
88 next-level-cache = <&L <<
89 L2_1: l2-cache { <<
90 compatible = " <<
91 cache-level = <<
92 cache-unified; <<
93 }; <<
94 }; <<
95 <<
96 CPU5: cpu@101 { <<
97 device_type = "cpu"; <<
98 compatible = "arm,cort <<
99 reg = <0x0 0x101>; <<
100 enable-method = "psci" <<
101 next-level-cache = <&L <<
102 }; <<
103 <<
104 CPU6: cpu@102 { <<
105 device_type = "cpu"; <<
106 compatible = "arm,cort <<
107 reg = <0x0 0x102>; <<
108 enable-method = "psci" <<
109 next-level-cache = <&L <<
110 }; <<
111 <<
112 CPU7: cpu@103 { <<
113 device_type = "cpu"; <<
114 compatible = "arm,cort <<
115 reg = <0x0 0x103>; <<
116 enable-method = "psci" <<
117 next-level-cache = <&L <<
118 }; <<
119 <<
120 cpu-map { 25 cpu-map {
121 cluster0 { 26 cluster0 {
122 core0 { 27 core0 {
123 cpu = 28 cpu = <&CPU0>;
124 }; 29 };
125 <<
126 core1 { <<
127 cpu = <<
128 }; <<
129 <<
130 core2 { <<
131 cpu = <<
132 }; <<
133 <<
134 core3 { <<
135 cpu = <<
136 }; <<
137 }; <<
138 <<
139 cluster1 { <<
140 core0 { <<
141 cpu = <<
142 }; <<
143 <<
144 core1 { <<
145 cpu = <<
146 }; <<
147 <<
148 cpu6_map: core <<
149 cpu = <<
150 }; <<
151 <<
152 cpu7_map: core <<
153 cpu = <<
154 }; <<
155 }; 30 };
156 }; 31 };
157 }; <<
158 <<
159 firmware { <<
160 scm { <<
161 compatible = "qcom,scm <<
162 }; <<
163 }; <<
164 32
165 memory@80000000 { !! 33 CPU0: cpu@0 {
166 device_type = "memory"; !! 34 device_type = "cpu";
167 /* We expect the bootloader to !! 35 compatible = "arm,cortex-a53";
168 reg = <0 0x80000000 0 0>; !! 36 reg = <0x0>;
169 }; !! 37 next-level-cache = <&L2_0>;
170 !! 38 L2_0: l2-cache {
171 pmu { !! 39 compatible = "cache";
172 compatible = "arm,cortex-a53-p !! 40 cache-level = <2>;
173 interrupts = <GIC_PPI 7 (GIC_C <<
174 }; <<
175 <<
176 psci { <<
177 compatible = "arm,psci-0.2"; <<
178 method = "hvc"; <<
179 }; <<
180 <<
181 rpm: remoteproc { <<
182 compatible = "qcom,msm8994-rpm <<
183 <<
184 smd-edge { <<
185 interrupts = <GIC_SPI <<
186 mboxes = <&apcs 0>; <<
187 qcom,smd-edge = <15>; <<
188 qcom,remote-pid = <6>; <<
189 <<
190 rpm_requests: rpm-requ <<
191 compatible = " <<
192 qcom,smd-chann <<
193 <<
194 rpmcc: clock-c <<
195 compat <<
196 #clock <<
197 }; <<
198 <<
199 rpmpd: power-c <<
200 compat <<
201 #power <<
202 operat <<
203 <<
204 rpmpd_ <<
205 <<
206 <<
207 <<
208 <<
209 <<
210 <<
211 <<
212 <<
213 <<
214 <<
215 <<
216 <<
217 <<
218 <<
219 <<
220 <<
221 <<
222 <<
223 <<
224 <<
225 }; <<
226 }; <<
227 }; 41 };
228 }; 42 };
229 }; 43 };
230 44
231 reserved-memory { !! 45 timer {
232 #address-cells = <2>; !! 46 compatible = "arm,armv8-timer";
233 #size-cells = <2>; !! 47 interrupts = <1 2 0xff08>,
234 ranges; !! 48 <1 3 0xff08>,
235 !! 49 <1 4 0xff08>,
236 dfps_data_mem: dfps-data@34000 !! 50 <1 1 0xff08>;
237 reg = <0 0x03400000 0 <<
238 no-map; <<
239 }; <<
240 <<
241 cont_splash_mem: memory@340100 <<
242 reg = <0 0x03401000 0 <<
243 no-map; <<
244 }; <<
245 <<
246 smem_mem: smem@6a00000 { <<
247 reg = <0 0x06a00000 0 <<
248 no-map; <<
249 }; <<
250 <<
251 mpss_mem: memory@7000000 { <<
252 reg = <0 0x07000000 0 <<
253 no-map; <<
254 }; <<
255 <<
256 peripheral_region: memory@ca00 <<
257 reg = <0 0x0ca00000 0 <<
258 no-map; <<
259 }; <<
260 <<
261 rmtfs_mem: memory@c6400000 { <<
262 compatible = "qcom,rmt <<
263 reg = <0 0xc6400000 0 <<
264 no-map; <<
265 <<
266 qcom,client-id = <1>; <<
267 }; <<
268 <<
269 mba_mem: memory@c6700000 { <<
270 reg = <0 0xc6700000 0 <<
271 no-map; <<
272 }; <<
273 <<
274 audio_mem: memory@c7000000 { <<
275 reg = <0 0xc7000000 0 <<
276 no-map; <<
277 }; <<
278 <<
279 adsp_mem: memory@c9400000 { <<
280 reg = <0 0xc9400000 0 <<
281 no-map; <<
282 }; <<
283 <<
284 res_hyp_mem: reserved@6c00000 <<
285 reg = <0 0x06c00000 0 <<
286 no-map; <<
287 }; <<
288 }; <<
289 <<
290 smem { <<
291 compatible = "qcom,smem"; <<
292 memory-region = <&smem_mem>; <<
293 qcom,rpm-msg-ram = <&rpm_msg_r <<
294 hwlocks = <&tcsr_mutex 3>; <<
295 }; <<
296 <<
297 smp2p-lpass { <<
298 compatible = "qcom,smp2p"; <<
299 qcom,smem = <443>, <429>; <<
300 <<
301 interrupts = <GIC_SPI 158 IRQ_ <<
302 <<
303 mboxes = <&apcs 10>; <<
304 <<
305 qcom,local-pid = <0>; <<
306 qcom,remote-pid = <2>; <<
307 <<
308 adsp_smp2p_out: master-kernel <<
309 qcom,entry-name = "mas <<
310 #qcom,smem-state-cells <<
311 }; <<
312 <<
313 adsp_smp2p_in: slave-kernel { <<
314 qcom,entry-name = "sla <<
315 <<
316 interrupt-controller; <<
317 #interrupt-cells = <2> <<
318 }; <<
319 }; 51 };
320 52
321 smp2p-modem { !! 53 soc: soc {
322 compatible = "qcom,smp2p"; <<
323 qcom,smem = <435>, <428>; <<
324 <<
325 interrupt-parent = <&intc>; <<
326 interrupts = <GIC_SPI 27 IRQ_T <<
327 <<
328 mboxes = <&apcs 14>; <<
329 <<
330 qcom,local-pid = <0>; <<
331 qcom,remote-pid = <1>; <<
332 <<
333 modem_smp2p_out: master-kernel <<
334 qcom,entry-name = "mas <<
335 #qcom,smem-state-cells <<
336 }; <<
337 <<
338 modem_smp2p_in: slave-kernel { <<
339 qcom,entry-name = "sla <<
340 <<
341 interrupt-controller; <<
342 #interrupt-cells = <2> <<
343 }; <<
344 }; <<
345 54
346 soc: soc@0 { <<
347 #address-cells = <1>; 55 #address-cells = <1>;
348 #size-cells = <1>; 56 #size-cells = <1>;
349 ranges = <0 0 0 0xffffffff>; 57 ranges = <0 0 0 0xffffffff>;
350 compatible = "simple-bus"; 58 compatible = "simple-bus";
351 59
352 intc: interrupt-controller@f90 60 intc: interrupt-controller@f9000000 {
353 compatible = "qcom,msm 61 compatible = "qcom,msm-qgic2";
354 interrupt-controller; 62 interrupt-controller;
355 #interrupt-cells = <3> 63 #interrupt-cells = <3>;
356 reg = <0xf9000000 0x10 64 reg = <0xf9000000 0x1000>,
357 <0xf9002000 0x10 !! 65 <0xf9002000 0x1000>;
358 }; <<
359 <<
360 apcs: mailbox@f900d000 { <<
361 compatible = "qcom,msm <<
362 reg = <0xf900d000 0x20 <<
363 #mbox-cells = <1>; <<
364 }; <<
365 <<
366 watchdog@f9017000 { <<
367 compatible = "qcom,aps <<
368 reg = <0xf9017000 0x10 <<
369 interrupts = <GIC_SPI <<
370 <GIC_SPI <<
371 clocks = <&sleep_clk>; <<
372 timeout-sec = <10>; <<
373 }; 66 };
374 67
375 timer@f9020000 { 68 timer@f9020000 {
376 #address-cells = <1>; 69 #address-cells = <1>;
377 #size-cells = <1>; 70 #size-cells = <1>;
378 ranges; 71 ranges;
379 compatible = "arm,armv 72 compatible = "arm,armv7-timer-mem";
380 reg = <0xf9020000 0x10 73 reg = <0xf9020000 0x1000>;
381 74
382 frame@f9021000 { 75 frame@f9021000 {
383 frame-number = 76 frame-number = <0>;
384 interrupts = < 77 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
385 < 78 <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
386 reg = <0xf9021 79 reg = <0xf9021000 0x1000>,
387 <0xf9022 80 <0xf9022000 0x1000>;
388 }; 81 };
389 82
390 frame@f9023000 { 83 frame@f9023000 {
391 frame-number = 84 frame-number = <1>;
392 interrupts = < 85 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
393 reg = <0xf9023 86 reg = <0xf9023000 0x1000>;
394 status = "disa 87 status = "disabled";
395 }; 88 };
396 89
397 frame@f9024000 { 90 frame@f9024000 {
398 frame-number = 91 frame-number = <2>;
399 interrupts = < 92 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
400 reg = <0xf9024 93 reg = <0xf9024000 0x1000>;
401 status = "disa 94 status = "disabled";
402 }; 95 };
403 96
404 frame@f9025000 { 97 frame@f9025000 {
405 frame-number = 98 frame-number = <3>;
406 interrupts = < 99 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
407 reg = <0xf9025 100 reg = <0xf9025000 0x1000>;
408 status = "disa 101 status = "disabled";
409 }; 102 };
410 103
411 frame@f9026000 { 104 frame@f9026000 {
412 frame-number = 105 frame-number = <4>;
413 interrupts = < 106 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
414 reg = <0xf9026 107 reg = <0xf9026000 0x1000>;
415 status = "disa 108 status = "disabled";
416 }; 109 };
417 110
418 frame@f9027000 { 111 frame@f9027000 {
419 frame-number = 112 frame-number = <5>;
420 interrupts = < 113 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
421 reg = <0xf9027 114 reg = <0xf9027000 0x1000>;
422 status = "disa 115 status = "disabled";
423 }; 116 };
424 117
425 frame@f9028000 { 118 frame@f9028000 {
426 frame-number = 119 frame-number = <6>;
427 interrupts = < 120 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
428 reg = <0xf9028 121 reg = <0xf9028000 0x1000>;
429 status = "disa 122 status = "disabled";
430 }; 123 };
431 }; 124 };
432 125
433 usb3: usb@f92f8800 { !! 126 restart@fc4ab000 {
434 compatible = "qcom,msm !! 127 compatible = "qcom,pshold";
435 reg = <0xf92f8800 0x40 !! 128 reg = <0xfc4ab000 0x4>;
436 #address-cells = <1>; <<
437 #size-cells = <1>; <<
438 ranges; <<
439 <<
440 clocks = <&gcc GCC_USB <<
441 <&gcc GCC_SYS <<
442 <&gcc GCC_USB <<
443 <&gcc GCC_USB <<
444 clock-names = "core", <<
445 "iface", <<
446 "sleep", <<
447 "mock_ut <<
448 <<
449 assigned-clocks = <&gc <<
450 <&gc <<
451 assigned-clock-rates = <<
452 <<
453 power-domains = <&gcc <<
454 qcom,select-utmi-as-pi <<
455 <<
456 usb@f9200000 { <<
457 compatible = " <<
458 reg = <0xf9200 <<
459 interrupts = < <<
460 snps,dis_u2_su <<
461 snps,dis_enbls <<
462 maximum-speed <<
463 dr_mode = "per <<
464 }; <<
465 }; <<
466 <<
467 sdhc1: mmc@f9824900 { <<
468 compatible = "qcom,msm <<
469 reg = <0xf9824900 0x1a <<
470 reg-names = "hc", "cor <<
471 <<
472 interrupts = <GIC_SPI <<
473 <GIC_SPI <<
474 interrupt-names = "hc_ <<
475 <<
476 clocks = <&gcc GCC_SDC <<
477 <&gcc GCC_SDC <<
478 <&xo_board>; <<
479 clock-names = "iface", <<
480 <<
481 pinctrl-names = "defau <<
482 pinctrl-0 = <&sdc1_clk <<
483 pinctrl-1 = <&sdc1_clk <<
484 <<
485 bus-width = <8>; <<
486 non-removable; <<
487 status = "disabled"; <<
488 }; <<
489 <<
490 sdhc2: mmc@f98a4900 { <<
491 compatible = "qcom,msm <<
492 reg = <0xf98a4900 0x11 <<
493 reg-names = "hc", "cor <<
494 <<
495 interrupts = <GIC_SPI <<
496 <GIC_SPI 221 I <<
497 interrupt-names = "hc_ <<
498 <<
499 clocks = <&gcc GCC_SDC <<
500 <&gcc GCC_SDC <<
501 <&xo_board>; <<
502 clock-names = "iface", <<
503 <<
504 pinctrl-names = "defau <<
505 pinctrl-0 = <&sdc2_clk <<
506 pinctrl-1 = <&sdc2_clk <<
507 <<
508 cd-gpios = <&tlmm 100 <<
509 bus-width = <4>; <<
510 status = "disabled"; <<
511 }; 129 };
512 130
513 blsp1_dma: dma-controller@f990 !! 131 msmgpio: pinctrl@fd510000 {
514 compatible = "qcom,bam !! 132 compatible = "qcom,msm8994-pinctrl";
515 reg = <0xf9904000 0x19 !! 133 reg = <0xfd510000 0x4000>;
516 interrupts = <GIC_SPI !! 134 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
517 clocks = <&gcc GCC_BLS !! 135 gpio-controller;
518 clock-names = "bam_clk !! 136 gpio-ranges = <&msmgpio 0 0 146>;
519 #dma-cells = <1>; !! 137 #gpio-cells = <2>;
520 qcom,ee = <0>; !! 138 interrupt-controller;
521 qcom,controlled-remote !! 139 #interrupt-cells = <2>;
522 num-channels = <24>; <<
523 qcom,num-ees = <4>; <<
524 }; 140 };
525 141
526 blsp1_uart2: serial@f991e000 { 142 blsp1_uart2: serial@f991e000 {
527 compatible = "qcom,msm 143 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
528 reg = <0xf991e000 0x10 144 reg = <0xf991e000 0x1000>;
529 interrupts = <GIC_SPI 145 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
530 clock-names = "core", <<
531 clocks = <&gcc GCC_BLS <<
532 <&gcc GCC_BLS <<
533 pinctrl-names = "defau <<
534 pinctrl-0 = <&blsp1_ua <<
535 pinctrl-1 = <&blsp1_ua <<
536 status = "disabled"; 146 status = "disabled";
537 }; <<
538 <<
539 blsp1_i2c1: i2c@f9923000 { <<
540 compatible = "qcom,i2c <<
541 reg = <0xf9923000 0x50 <<
542 interrupts = <GIC_SPI <<
543 clocks = <&gcc GCC_BLS <<
544 <&gcc GCC_BLS <<
545 clock-names = "core", <<
546 clock-frequency = <400 <<
547 dmas = <&blsp1_dma 12> <<
548 dma-names = "tx", "rx" <<
549 pinctrl-names = "defau <<
550 pinctrl-0 = <&i2c1_def <<
551 pinctrl-1 = <&i2c1_sle <<
552 #address-cells = <1>; <<
553 #size-cells = <0>; <<
554 status = "disabled"; <<
555 }; <<
556 <<
557 blsp1_spi1: spi@f9923000 { <<
558 compatible = "qcom,spi <<
559 reg = <0xf9923000 0x50 <<
560 interrupts = <GIC_SPI <<
561 clocks = <&gcc GCC_BLS <<
562 <&gcc GCC_BLS <<
563 clock-names = "core", <<
564 dmas = <&blsp1_dma 12> <<
565 dma-names = "tx", "rx" <<
566 pinctrl-names = "defau <<
567 pinctrl-0 = <&blsp1_sp <<
568 pinctrl-1 = <&blsp1_sp <<
569 #address-cells = <1>; <<
570 #size-cells = <0>; <<
571 status = "disabled"; <<
572 }; <<
573 <<
574 blsp1_i2c2: i2c@f9924000 { <<
575 compatible = "qcom,i2c <<
576 reg = <0xf9924000 0x50 <<
577 interrupts = <GIC_SPI <<
578 clocks = <&gcc GCC_BLS <<
579 <&gcc GCC_BLS <<
580 clock-names = "core", <<
581 clock-frequency = <400 <<
582 dmas = <&blsp1_dma 14> <<
583 dma-names = "tx", "rx" <<
584 pinctrl-names = "defau <<
585 pinctrl-0 = <&i2c2_def <<
586 pinctrl-1 = <&i2c2_sle <<
587 #address-cells = <1>; <<
588 #size-cells = <0>; <<
589 status = "disabled"; <<
590 }; <<
591 <<
592 /* I2C3 doesn't exist */ <<
593 <<
594 blsp1_i2c4: i2c@f9926000 { <<
595 compatible = "qcom,i2c <<
596 reg = <0xf9926000 0x50 <<
597 interrupts = <GIC_SPI <<
598 clocks = <&gcc GCC_BLS <<
599 <&gcc GCC_BLS <<
600 clock-names = "core", <<
601 clock-frequency = <400 <<
602 dmas = <&blsp1_dma 18> <<
603 dma-names = "tx", "rx" <<
604 pinctrl-names = "defau <<
605 pinctrl-0 = <&i2c4_def <<
606 pinctrl-1 = <&i2c4_sle <<
607 #address-cells = <1>; <<
608 #size-cells = <0>; <<
609 status = "disabled"; <<
610 }; <<
611 <<
612 blsp1_i2c5: i2c@f9927000 { <<
613 compatible = "qcom,i2c <<
614 reg = <0xf9927000 0x50 <<
615 interrupts = <GIC_SPI <<
616 clocks = <&gcc GCC_BLS <<
617 <&gcc GCC_BLS <<
618 clock-names = "core", 147 clock-names = "core", "iface";
619 clock-frequency = <400 !! 148 clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
620 dmas = <&blsp2_dma 20> !! 149 <&clock_gcc GCC_BLSP1_AHB_CLK>;
621 dma-names = "tx", "rx" <<
622 pinctrl-names = "defau <<
623 pinctrl-0 = <&i2c5_def <<
624 pinctrl-1 = <&i2c5_sle <<
625 #address-cells = <1>; <<
626 #size-cells = <0>; <<
627 status = "disabled"; <<
628 }; <<
629 <<
630 blsp1_i2c6: i2c@f9928000 { <<
631 compatible = "qcom,i2c <<
632 reg = <0xf9928000 0x50 <<
633 interrupts = <GIC_SPI <<
634 clocks = <&gcc GCC_BLS <<
635 <&gcc GCC_BLS <<
636 clock-names = "core", <<
637 clock-frequency = <400 <<
638 dmas = <&blsp1_dma 22> <<
639 dma-names = "tx", "rx" <<
640 pinctrl-names = "defau <<
641 pinctrl-0 = <&i2c6_def <<
642 pinctrl-1 = <&i2c6_sle <<
643 #address-cells = <1>; <<
644 #size-cells = <0>; <<
645 status = "disabled"; <<
646 }; <<
647 <<
648 blsp2_dma: dma-controller@f994 <<
649 compatible = "qcom,bam <<
650 reg = <0xf9944000 0x19 <<
651 interrupts = <GIC_SPI <<
652 clocks = <&gcc GCC_BLS <<
653 clock-names = "bam_clk <<
654 #dma-cells = <1>; <<
655 qcom,ee = <0>; <<
656 qcom,controlled-remote <<
657 num-channels = <24>; <<
658 qcom,num-ees = <4>; <<
659 }; <<
660 <<
661 blsp2_uart2: serial@f995e000 { <<
662 compatible = "qcom,msm <<
663 reg = <0xf995e000 0x10 <<
664 interrupts = <GIC_SPI <<
665 clock-names = "core", <<
666 clocks = <&gcc GCC_BLS <<
667 <&gcc <<
668 dmas = <&blsp2_dma 2>, <<
669 dma-names = "tx", "rx" <<
670 pinctrl-names = "defau <<
671 pinctrl-0 = <&blsp2_ua <<
672 pinctrl-1 = <&blsp2_ua <<
673 status = "disabled"; <<
674 }; 150 };
675 151
676 blsp2_i2c1: i2c@f9963000 { !! 152 tcsr_mutex_regs: syscon@fd484000 {
677 compatible = "qcom,i2c !! 153 compatible = "syscon";
678 reg = <0xf9963000 0x50 !! 154 reg = <0xfd484000 0x2000>;
679 interrupts = <GIC_SPI <<
680 clocks = <&gcc GCC_BLS <<
681 <&gcc GCC_BLS <<
682 clock-names = "core", <<
683 clock-frequency = <400 <<
684 dmas = <&blsp2_dma 12> <<
685 dma-names = "tx", "rx" <<
686 pinctrl-names = "defau <<
687 pinctrl-0 = <&i2c7_def <<
688 pinctrl-1 = <&i2c7_sle <<
689 #address-cells = <1>; <<
690 #size-cells = <0>; <<
691 status = "disabled"; <<
692 }; <<
693 <<
694 blsp2_spi4: spi@f9966000 { <<
695 compatible = "qcom,spi <<
696 reg = <0xf9966000 0x50 <<
697 interrupts = <GIC_SPI <<
698 clocks = <&gcc GCC_BLS <<
699 <&gcc GCC_BLS <<
700 clock-names = "core", <<
701 dmas = <&blsp2_dma 18> <<
702 dma-names = "tx", "rx" <<
703 pinctrl-names = "defau <<
704 pinctrl-0 = <&blsp2_sp <<
705 pinctrl-1 = <&blsp2_sp <<
706 #address-cells = <1>; <<
707 #size-cells = <0>; <<
708 status = "disabled"; <<
709 }; 155 };
710 156
711 blsp2_i2c5: i2c@f9967000 { !! 157 clock_gcc: clock-controller@fc400000 {
712 compatible = "qcom,i2c <<
713 reg = <0xf9967000 0x50 <<
714 interrupts = <GIC_SPI <<
715 clocks = <&gcc GCC_BLS <<
716 <&gcc GCC_BLS <<
717 clock-names = "core", <<
718 clock-frequency = <355 <<
719 dmas = <&blsp2_dma 20> <<
720 dma-names = "tx", "rx" <<
721 pinctrl-names = "defau <<
722 pinctrl-0 = <&i2c11_de <<
723 pinctrl-1 = <&i2c11_sl <<
724 #address-cells = <1>; <<
725 #size-cells = <0>; <<
726 status = "disabled"; <<
727 }; <<
728 <<
729 gcc: clock-controller@fc400000 <<
730 compatible = "qcom,gcc 158 compatible = "qcom,gcc-msm8994";
731 #clock-cells = <1>; 159 #clock-cells = <1>;
732 #reset-cells = <1>; 160 #reset-cells = <1>;
733 #power-domain-cells = 161 #power-domain-cells = <1>;
734 reg = <0xfc400000 0x20 162 reg = <0xfc400000 0x2000>;
735 <<
736 clock-names = "xo", "s <<
737 clocks = <&xo_board>, <<
738 }; <<
739 <<
740 rpm_msg_ram: sram@fc428000 { <<
741 compatible = "qcom,rpm <<
742 reg = <0xfc428000 0x40 <<
743 }; <<
744 <<
745 restart@fc4ab000 { <<
746 compatible = "qcom,psh <<
747 reg = <0xfc4ab000 0x4> <<
748 }; <<
749 <<
750 spmi_bus: spmi@fc4cf000 { <<
751 compatible = "qcom,spm <<
752 reg = <0xfc4cf000 0x10 <<
753 <0xfc4cb000 0x10 <<
754 <0xfc4ca000 0x10 <<
755 reg-names = "core", "i <<
756 interrupt-names = "per <<
757 interrupts = <GIC_SPI <<
758 qcom,ee = <0>; <<
759 qcom,channel = <0>; <<
760 #address-cells = <2>; <<
761 #size-cells = <0>; <<
762 interrupt-controller; <<
763 #interrupt-cells = <4> <<
764 }; <<
765 <<
766 tcsr_mutex: hwlock@fd484000 { <<
767 compatible = "qcom,msm <<
768 reg = <0xfd484000 0x10 <<
769 #hwlock-cells = <1>; <<
770 }; <<
771 <<
772 tlmm: pinctrl@fd510000 { <<
773 compatible = "qcom,msm <<
774 reg = <0xfd510000 0x40 <<
775 interrupts = <GIC_SPI <<
776 gpio-controller; <<
777 gpio-ranges = <&tlmm 0 <<
778 #gpio-cells = <2>; <<
779 interrupt-controller; <<
780 #interrupt-cells = <2> <<
781 <<
782 blsp1_uart2_default: b <<
783 pins = "gpio4" <<
784 function = "bl <<
785 drive-strength <<
786 bias-disable; <<
787 }; <<
788 <<
789 blsp1_uart2_sleep: bls <<
790 pins = "gpio4" <<
791 function = "gp <<
792 drive-strength <<
793 bias-pull-down <<
794 }; <<
795 <<
796 blsp2_uart2_default: b <<
797 pins = "gpio45 <<
798 function = "bl <<
799 drive-strength <<
800 bias-disable; <<
801 }; <<
802 <<
803 blsp2_uart2_sleep: bls <<
804 pins = "gpio45 <<
805 function = "gp <<
806 drive-strength <<
807 bias-disable; <<
808 }; <<
809 <<
810 i2c1_default: i2c1-def <<
811 pins = "gpio2" <<
812 function = "bl <<
813 drive-strength <<
814 bias-disable; <<
815 }; <<
816 <<
817 i2c1_sleep: i2c1-sleep <<
818 pins = "gpio2" <<
819 function = "gp <<
820 drive-strength <<
821 bias-disable; <<
822 }; <<
823 <<
824 i2c2_default: i2c2-def <<
825 pins = "gpio6" <<
826 function = "bl <<
827 drive-strength <<
828 bias-disable; <<
829 }; <<
830 <<
831 i2c2_sleep: i2c2-sleep <<
832 pins = "gpio6" <<
833 function = "gp <<
834 drive-strength <<
835 bias-disable; <<
836 }; <<
837 <<
838 i2c4_default: i2c4-def <<
839 pins = "gpio19 <<
840 function = "bl <<
841 drive-strength <<
842 bias-disable; <<
843 }; <<
844 <<
845 i2c4_sleep: i2c4-sleep <<
846 pins = "gpio19 <<
847 function = "gp <<
848 drive-strength <<
849 bias-pull-down <<
850 }; <<
851 <<
852 i2c5_default: i2c5-def <<
853 pins = "gpio23 <<
854 function = "bl <<
855 drive-strength <<
856 bias-disable; <<
857 }; <<
858 <<
859 i2c5_sleep: i2c5-sleep <<
860 pins = "gpio23 <<
861 function = "gp <<
862 drive-strength <<
863 bias-disable; <<
864 }; <<
865 <<
866 i2c6_default: i2c6-def <<
867 pins = "gpio28 <<
868 function = "bl <<
869 drive-strength <<
870 bias-disable; <<
871 }; <<
872 <<
873 i2c6_sleep: i2c6-sleep <<
874 pins = "gpio28 <<
875 function = "gp <<
876 drive-strength <<
877 bias-disable; <<
878 }; <<
879 <<
880 i2c7_default: i2c7-def <<
881 pins = "gpio44 <<
882 function = "bl <<
883 drive-strength <<
884 bias-disable; <<
885 }; <<
886 <<
887 i2c7_sleep: i2c7-sleep <<
888 pins = "gpio44 <<
889 function = "gp <<
890 drive-strength <<
891 bias-disable; <<
892 }; <<
893 <<
894 blsp2_spi10_default: b <<
895 default-pins { <<
896 pins = <<
897 functi <<
898 drive- <<
899 bias-p <<
900 }; <<
901 <<
902 cs-pins { <<
903 pins = <<
904 functi <<
905 drive- <<
906 bias-d <<
907 }; <<
908 }; <<
909 <<
910 blsp2_spi10_sleep: bls <<
911 pins = "gpio53 <<
912 function = "gp <<
913 drive-strength <<
914 bias-disable; <<
915 }; <<
916 <<
917 i2c11_default: i2c11-d <<
918 pins = "gpio83 <<
919 function = "bl <<
920 drive-strength <<
921 bias-disable; <<
922 }; <<
923 <<
924 i2c11_sleep: i2c11-sle <<
925 pins = "gpio83 <<
926 function = "gp <<
927 drive-strength <<
928 bias-disable; <<
929 }; <<
930 <<
931 blsp1_spi1_default: bl <<
932 default-pins { <<
933 pins = <<
934 functi <<
935 drive- <<
936 bias-p <<
937 }; <<
938 <<
939 cs-pins { <<
940 pins = <<
941 functi <<
942 drive- <<
943 bias-d <<
944 }; <<
945 }; <<
946 <<
947 blsp1_spi1_sleep: blsp <<
948 pins = "gpio0" <<
949 function = "gp <<
950 drive-strength <<
951 bias-disable; <<
952 }; <<
953 <<
954 sdc1_clk_on: clk-on-st <<
955 pins = "sdc1_c <<
956 bias-disable; <<
957 drive-strength <<
958 }; <<
959 <<
960 sdc1_clk_off: clk-off- <<
961 pins = "sdc1_c <<
962 bias-disable; <<
963 drive-strength <<
964 }; <<
965 <<
966 sdc1_cmd_on: cmd-on-st <<
967 pins = "sdc1_c <<
968 bias-pull-up; <<
969 drive-strength <<
970 }; <<
971 <<
972 sdc1_cmd_off: cmd-off- <<
973 pins = "sdc1_c <<
974 bias-pull-up; <<
975 drive-strength <<
976 }; <<
977 <<
978 sdc1_data_on: data-on- <<
979 pins = "sdc1_d <<
980 bias-pull-up; <<
981 drive-strength <<
982 }; <<
983 <<
984 sdc1_data_off: data-of <<
985 pins = "sdc1_d <<
986 bias-pull-up; <<
987 drive-strength <<
988 }; <<
989 <<
990 sdc1_rclk_on: rclk-on- <<
991 pins = "sdc1_r <<
992 bias-pull-down <<
993 }; <<
994 <<
995 sdc1_rclk_off: rclk-of <<
996 pins = "sdc1_r <<
997 bias-pull-down <<
998 }; <<
999 <<
1000 sdc2_clk_on: sdc2-clk <<
1001 pins = "sdc2_ <<
1002 bias-disable; <<
1003 drive-strengt <<
1004 }; <<
1005 <<
1006 sdc2_clk_off: sdc2-cl <<
1007 pins = "sdc2_ <<
1008 bias-disable; <<
1009 drive-strengt <<
1010 }; <<
1011 <<
1012 sdc2_cmd_on: sdc2-cmd <<
1013 pins = "sdc2_ <<
1014 bias-pull-up; <<
1015 drive-strengt <<
1016 }; <<
1017 <<
1018 sdc2_cmd_off: sdc2-cm <<
1019 pins = "sdc2_ <<
1020 bias-pull-up; <<
1021 drive-strengt <<
1022 }; <<
1023 <<
1024 sdc2_data_on: sdc2-da <<
1025 pins = "sdc2_ <<
1026 bias-pull-up; <<
1027 drive-strengt <<
1028 }; <<
1029 <<
1030 sdc2_data_off: sdc2-d <<
1031 pins = "sdc2_ <<
1032 bias-pull-up; <<
1033 drive-strengt <<
1034 }; <<
1035 }; 163 };
>> 164 };
1036 165
1037 mmcc: clock-controller@fd8c00 !! 166 memory {
1038 compatible = "qcom,mm !! 167 device_type = "memory";
1039 reg = <0xfd8c0000 0x5 !! 168 // We expect the bootloader to fill in the reg
1040 #clock-cells = <1>; !! 169 reg = <0 0 0 0>;
1041 #reset-cells = <1>; !! 170 };
1042 #power-domain-cells = <<
1043 171
1044 clock-names = "xo", !! 172 xo_board: xo_board {
1045 "gpll0" !! 173 compatible = "fixed-clock";
1046 "mmssno !! 174 #clock-cells = <0>;
1047 "oxili_ !! 175 clock-frequency = <19200000>;
1048 "dsi0pl !! 176 };
1049 "dsi0pl <<
1050 "dsi1pl <<
1051 "dsi1pl <<
1052 "hdmipl <<
1053 clocks = <&xo_board>, <<
1054 <&gcc GPLL0_ <<
1055 <&rpmcc RPM_ <<
1056 <&rpmcc RPM_ <<
1057 <0>, <<
1058 <0>, <<
1059 <0>, <<
1060 <0>, <<
1061 <0>; <<
1062 <<
1063 assigned-clocks = <&m <<
1064 <&m <<
1065 <&m <<
1066 <&m <<
1067 <&m <<
1068 assigned-clock-rates <<
1069 <<
1070 <<
1071 <<
1072 <<
1073 }; <<
1074 177
1075 ocmem: sram@fdd00000 { !! 178 sleep_clk: sleep_clk {
1076 compatible = "qcom,ms !! 179 compatible = "fixed-clock";
1077 reg = <0xfdd00000 0x2 !! 180 #clock-cells = <0>;
1078 <0xfec00000 0x2 !! 181 clock-frequency = <32768>;
1079 reg-names = "ctrl", " !! 182 };
1080 ranges = <0 0xfec0000 <<
1081 clocks = <&rpmcc RPM_ <<
1082 <&mmcc OCMEM <<
1083 clock-names = "core", <<
1084 183
1085 #address-cells = <1>; !! 184 reserved-memory {
1086 #size-cells = <1>; !! 185 #address-cells = <2>;
>> 186 #size-cells = <2>;
>> 187 ranges;
1087 188
1088 gmu_sram: gmu-sram@0 !! 189 smem_mem: smem_region@6a00000 {
1089 reg = <0x0 0x !! 190 reg = <0x0 0x6a00000 0x0 0x200000>;
1090 }; !! 191 no-map;
1091 }; 192 };
1092 }; 193 };
1093 194
1094 timer: timer { !! 195 tcsr_mutex: hwlock {
1095 compatible = "arm,armv8-timer !! 196 compatible = "qcom,tcsr-mutex";
1096 interrupts = <GIC_PPI 2 (GIC_ !! 197 syscon = <&tcsr_mutex_regs 0 0x80>;
1097 <GIC_PPI 3 (GIC_ !! 198 #hwlock-cells = <1>;
1098 <GIC_PPI 4 (GIC_ <<
1099 <GIC_PPI 1 (GIC_ <<
1100 }; 199 };
1101 200
1102 vph_pwr: vph-pwr-regulator { !! 201 qcom,smem@6a00000 {
1103 compatible = "regulator-fixed !! 202 compatible = "qcom,smem";
1104 regulator-name = "vph_pwr"; !! 203 memory-region = <&smem_mem>;
1105 !! 204 hwlocks = <&tcsr_mutex 3>;
1106 regulator-min-microvolt = <36 <<
1107 regulator-max-microvolt = <36 <<
1108 <<
1109 regulator-always-on; <<
1110 }; 205 };
1111 }; 206 };
1112 207
>> 208
>> 209 #include "msm8994-pins.dtsi"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.