1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2021, AngeloGioacchino Del Re 3 * Copyright (c) 2021, AngeloGioacchino Del Regno
4 * <angelogioacchino.delreg 4 * <angelogioacchino.delregno@somainline.org>
5 */ 5 */
6 6
7 /dts-v1/; 7 /dts-v1/;
8 8
9 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h> 10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
12 #include "msm8998.dtsi" 12 #include "msm8998.dtsi"
13 #include "pm8005.dtsi" 13 #include "pm8005.dtsi"
14 #include "pm8998.dtsi" 14 #include "pm8998.dtsi"
15 #include "pmi8998.dtsi" 15 #include "pmi8998.dtsi"
16 16
17 / { 17 / {
18 model = "F(x)tec Pro1 (QX1000)"; 18 model = "F(x)tec Pro1 (QX1000)";
19 compatible = "fxtec,pro1", "qcom,msm89 19 compatible = "fxtec,pro1", "qcom,msm8998";
20 chassis-type = "handset"; 20 chassis-type = "handset";
21 qcom,board-id = <0x02000b 0x10>; 21 qcom,board-id = <0x02000b 0x10>;
22 22
23 aliases { 23 aliases {
24 serial0 = &blsp2_uart1; 24 serial0 = &blsp2_uart1;
25 serial1 = &blsp1_uart3; 25 serial1 = &blsp1_uart3;
26 }; 26 };
27 27
28 /* 28 /*
29 * Until we hook up type-c detection, 29 * Until we hook up type-c detection, we
30 * have to stick with this. But it wor 30 * have to stick with this. But it works.
31 */ 31 */
32 extcon_usb: extcon-usb { 32 extcon_usb: extcon-usb {
33 compatible = "linux,extcon-usb 33 compatible = "linux,extcon-usb-gpio";
34 id-gpios = <&tlmm 38 GPIO_ACTI !! 34 id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
35 }; 35 };
36 36
37 gpio-hall-sensors { 37 gpio-hall-sensors {
38 compatible = "gpio-keys"; 38 compatible = "gpio-keys";
39 label = "Hall sensors"; 39 label = "Hall sensors";
40 pinctrl-names = "default"; 40 pinctrl-names = "default";
41 pinctrl-0 = <&hall_sensor1_def 41 pinctrl-0 = <&hall_sensor1_default>;
42 42
43 event-hall-sensor1 { 43 event-hall-sensor1 {
44 label = "Keyboard Hall 44 label = "Keyboard Hall Sensor";
45 gpios = <&tlmm 124 GPI 45 gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
46 debounce-interval = <1 46 debounce-interval = <15>;
47 wakeup-source; !! 47 gpio-key,wakeup;
48 linux,input-type = <EV 48 linux,input-type = <EV_SW>;
49 linux,code = <SW_KEYPA 49 linux,code = <SW_KEYPAD_SLIDE>;
50 }; 50 };
51 }; 51 };
52 52
53 gpio-kb-extra-keys { 53 gpio-kb-extra-keys {
54 compatible = "gpio-keys"; 54 compatible = "gpio-keys";
55 label = "Keyboard extra keys"; 55 label = "Keyboard extra keys";
56 pinctrl-names = "default"; 56 pinctrl-names = "default";
57 pinctrl-0 = <&gpio_kb_pins_ext 57 pinctrl-0 = <&gpio_kb_pins_extra>;
58 58
59 key-home { 59 key-home {
60 label = "Home"; 60 label = "Home";
61 gpios = <&tlmm 21 GPIO 61 gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
62 linux,code = <KEY_HOME 62 linux,code = <KEY_HOMEPAGE>;
63 debounce-interval = <1 63 debounce-interval = <15>;
64 linux,can-disable; 64 linux,can-disable;
65 }; 65 };
66 66
67 key-super-l { 67 key-super-l {
68 label = "Super Left"; 68 label = "Super Left";
69 gpios = <&tlmm 32 GPIO 69 gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
70 linux,code = <KEY_FN>; 70 linux,code = <KEY_FN>;
71 debounce-interval = <1 71 debounce-interval = <15>;
72 linux,can-disable; 72 linux,can-disable;
73 }; 73 };
74 74
75 key-super-r { 75 key-super-r {
76 label = "Super Right"; 76 label = "Super Right";
77 gpios = <&tlmm 33 GPIO 77 gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
78 linux,code = <KEY_FN>; 78 linux,code = <KEY_FN>;
79 debounce-interval = <1 79 debounce-interval = <15>;
80 linux,can-disable; 80 linux,can-disable;
81 }; 81 };
82 82
83 key-shift { 83 key-shift {
84 label = "Shift"; 84 label = "Shift";
85 gpios = <&tlmm 114 GPI 85 gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
86 linux,code = <KEY_RIGH 86 linux,code = <KEY_RIGHTSHIFT>;
87 debounce-interval = <1 87 debounce-interval = <15>;
88 linux,can-disable; 88 linux,can-disable;
89 }; 89 };
90 90
91 key-ctrl { 91 key-ctrl {
92 label = "Ctrl"; 92 label = "Ctrl";
93 gpios = <&tlmm 128 GPI 93 gpios = <&tlmm 128 GPIO_ACTIVE_LOW>;
94 linux,code = <KEY_LEFT 94 linux,code = <KEY_LEFTCTRL>;
95 debounce-interval = <1 95 debounce-interval = <15>;
96 linux,can-disable; 96 linux,can-disable;
97 }; 97 };
98 98
99 key-alt { 99 key-alt {
100 label = "Alt"; 100 label = "Alt";
101 gpios = <&tlmm 129 GPI 101 gpios = <&tlmm 129 GPIO_ACTIVE_LOW>;
102 linux,code = <KEY_LEFT 102 linux,code = <KEY_LEFTALT>;
103 debounce-interval = <1 103 debounce-interval = <15>;
104 linux,can-disable; 104 linux,can-disable;
105 }; 105 };
106 }; 106 };
107 107
108 gpio-keys { 108 gpio-keys {
109 compatible = "gpio-keys"; 109 compatible = "gpio-keys";
110 label = "Side buttons"; 110 label = "Side buttons";
111 pinctrl-names = "default"; 111 pinctrl-names = "default";
112 pinctrl-0 = <&vol_up_pin_a>, < 112 pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
113 <&cam_snapshot_pin 113 <&cam_snapshot_pin_a>;
114 button-vol-up { 114 button-vol-up {
115 label = "Volume Up"; 115 label = "Volume Up";
116 gpios = <&pm8998_gpios !! 116 gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
117 linux,input-type = <EV 117 linux,input-type = <EV_KEY>;
118 linux,code = <KEY_VOLU 118 linux,code = <KEY_VOLUMEUP>;
119 wakeup-source; !! 119 gpio-key,wakeup;
120 debounce-interval = <1 120 debounce-interval = <15>;
121 }; 121 };
122 122
123 button-camera-snapshot { 123 button-camera-snapshot {
124 label = "Camera Snapsh 124 label = "Camera Snapshot";
125 gpios = <&pm8998_gpios !! 125 gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
126 linux,input-type = <EV 126 linux,input-type = <EV_KEY>;
127 linux,code = <KEY_CAME 127 linux,code = <KEY_CAMERA>;
128 debounce-interval = <1 128 debounce-interval = <15>;
129 }; 129 };
130 130
131 button-camera-focus { 131 button-camera-focus {
132 label = "Camera Focus" 132 label = "Camera Focus";
133 gpios = <&pm8998_gpios !! 133 gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
134 linux,input-type = <EV 134 linux,input-type = <EV_KEY>;
135 linux,code = <KEY_CAME 135 linux,code = <KEY_CAMERA_FOCUS>;
136 debounce-interval = <1 136 debounce-interval = <15>;
137 }; 137 };
138 }; 138 };
139 139
140 keyboard-leds { 140 keyboard-leds {
141 compatible = "gpio-leds"; 141 compatible = "gpio-leds";
142 142
143 led-0 { 143 led-0 {
144 color = <LED_COLOR_ID_ 144 color = <LED_COLOR_ID_WHITE>;
145 default-state = "off"; 145 default-state = "off";
146 function = LED_FUNCTIO 146 function = LED_FUNCTION_KBD_BACKLIGHT;
147 gpios = <&tlmm 16 GPIO 147 gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
148 label = "white:kbd_bac 148 label = "white:kbd_backlight";
149 retain-state-suspended 149 retain-state-suspended;
150 }; 150 };
151 151
152 led-1 { 152 led-1 {
153 color = <LED_COLOR_ID_ 153 color = <LED_COLOR_ID_YELLOW>;
154 default-state = "off"; 154 default-state = "off";
155 function = LED_FUNCTIO 155 function = LED_FUNCTION_CAPSLOCK;
156 gpios = <&tlmm 26 GPIO 156 gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
157 label = "yellow:capslo 157 label = "yellow:capslock";
158 linux,default-trigger 158 linux,default-trigger = "kbd-capslock";
159 }; 159 };
160 }; 160 };
161 161
162 reserved-memory { 162 reserved-memory {
163 cont_splash_mem: memory@9d4000 163 cont_splash_mem: memory@9d400000 {
164 reg = <0x0 0x9d400000 164 reg = <0x0 0x9d400000 0x0 0x2000000>;
165 no-map; 165 no-map;
166 }; 166 };
167 167
168 zap_shader_region: memory@f640 168 zap_shader_region: memory@f6400000 {
169 compatible = "shared-d 169 compatible = "shared-dma-pool";
170 reg = <0x0 0xf6400000 170 reg = <0x0 0xf6400000 0x0 0x2000>;
171 no-map; 171 no-map;
172 }; 172 };
173 173
174 ramoops@ffc00000 { 174 ramoops@ffc00000 {
175 compatible = "ramoops" 175 compatible = "ramoops";
176 reg = <0x0 0xffc00000 176 reg = <0x0 0xffc00000 0x0 0x100000>;
177 console-size = <0x6000 177 console-size = <0x60000>;
178 ecc-size = <16>; 178 ecc-size = <16>;
179 ftrace-size = <0x10000 179 ftrace-size = <0x10000>;
180 pmsg-size = <0x20000>; 180 pmsg-size = <0x20000>;
181 record-size = <0x10000 181 record-size = <0x10000>;
182 }; 182 };
183 }; 183 };
184 184
185 ts_vio_vreg: ts-vio-vreg { 185 ts_vio_vreg: ts-vio-vreg {
186 compatible = "regulator-fixed" 186 compatible = "regulator-fixed";
187 regulator-name = "ts_vio_reg"; 187 regulator-name = "ts_vio_reg";
188 startup-delay-us = <2>; 188 startup-delay-us = <2>;
189 enable-active-high; 189 enable-active-high;
190 gpio = <&tlmm 81 GPIO_ACTIVE_H 190 gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
191 pinctrl-names = "default"; 191 pinctrl-names = "default";
192 pinctrl-0 = <&ts_vio_default>; 192 pinctrl-0 = <&ts_vio_default>;
193 regulator-always-on; 193 regulator-always-on;
194 }; 194 };
195 195
196 vph_pwr: vph-pwr-regulator { 196 vph_pwr: vph-pwr-regulator {
197 compatible = "regulator-fixed" 197 compatible = "regulator-fixed";
198 regulator-name = "vph_pwr"; 198 regulator-name = "vph_pwr";
199 regulator-always-on; 199 regulator-always-on;
200 regulator-boot-on; 200 regulator-boot-on;
201 }; 201 };
202 }; 202 };
203 203
204 &blsp1_uart3 { 204 &blsp1_uart3 {
205 status = "okay"; 205 status = "okay";
206 206
207 bluetooth { 207 bluetooth {
208 compatible = "qcom,wcn3990-bt" 208 compatible = "qcom,wcn3990-bt";
209 209
210 vddio-supply = <&vreg_s4a_1p8> 210 vddio-supply = <&vreg_s4a_1p8>;
211 vddxo-supply = <&vreg_l7a_1p8> 211 vddxo-supply = <&vreg_l7a_1p8>;
212 vddrf-supply = <&vreg_l17a_1p3 212 vddrf-supply = <&vreg_l17a_1p3>;
213 vddch0-supply = <&vreg_l25a_3p 213 vddch0-supply = <&vreg_l25a_3p3>;
214 max-speed = <3200000>; 214 max-speed = <3200000>;
215 }; 215 };
216 }; 216 };
217 217
218 &blsp1_uart3_on { 218 &blsp1_uart3_on {
219 rx-pins { !! 219 rx {
220 /delete-property/ bias-disable 220 /delete-property/ bias-disable;
221 /* 221 /*
222 * Configure a pull-up on 45 ( 222 * Configure a pull-up on 45 (RX). This is needed to
223 * avoid garbage data when the 223 * avoid garbage data when the TX pin of the Bluetooth
224 * module is in tri-state (mod 224 * module is in tri-state (module powered off or not
225 * driving the signal yet). 225 * driving the signal yet).
226 */ 226 */
227 bias-pull-up; 227 bias-pull-up;
228 }; 228 };
229 229
230 cts-pins { !! 230 cts {
231 /delete-property/ bias-disable 231 /delete-property/ bias-disable;
232 /* 232 /*
233 * Configure a pull-down on 47 233 * Configure a pull-down on 47 (CTS) to match the pull
234 * of the Bluetooth module. 234 * of the Bluetooth module.
235 */ 235 */
236 bias-pull-down; 236 bias-pull-down;
237 }; 237 };
238 }; 238 };
239 239
240 &blsp2_uart1 { 240 &blsp2_uart1 {
241 status = "okay"; 241 status = "okay";
242 }; 242 };
243 243
244 &blsp2_i2c1 { 244 &blsp2_i2c1 {
245 status = "okay"; 245 status = "okay";
246 246
247 touchscreen@14 { 247 touchscreen@14 {
248 compatible = "goodix,gt9286"; 248 compatible = "goodix,gt9286";
249 reg = <0x14>; 249 reg = <0x14>;
250 interrupt-parent = <&tlmm>; 250 interrupt-parent = <&tlmm>;
251 interrupts = <125 IRQ_TYPE_LEV 251 interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
252 reset-gpios = <&tlmm 89 GPIO_A !! 252 reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
253 AVDD28-supply = <&vreg_l28_3p0 253 AVDD28-supply = <&vreg_l28_3p0>;
254 VDDIO-supply = <&ts_vio_vreg>; 254 VDDIO-supply = <&ts_vio_vreg>;
255 pinctrl-names = "active"; 255 pinctrl-names = "active";
256 pinctrl-0 = <&ts_rst_n>, <&ts_ 256 pinctrl-0 = <&ts_rst_n>, <&ts_int_n>;
257 }; 257 };
258 }; 258 };
259 259
260 &etf { 260 &etf {
261 status = "okay"; 261 status = "okay";
262 }; 262 };
263 263
264 &etm1 { 264 &etm1 {
265 status = "okay"; 265 status = "okay";
266 }; 266 };
267 267
268 &etm2 { 268 &etm2 {
269 status = "okay"; 269 status = "okay";
270 }; 270 };
271 271
272 &etm3 { 272 &etm3 {
273 status = "okay"; 273 status = "okay";
274 }; 274 };
275 275
276 &etm4 { 276 &etm4 {
277 status = "okay"; 277 status = "okay";
278 }; 278 };
279 279
280 &etm5 { 280 &etm5 {
281 status = "okay"; 281 status = "okay";
282 }; 282 };
283 283
284 &etm6 { 284 &etm6 {
285 status = "okay"; 285 status = "okay";
286 }; 286 };
287 287
288 &etm7 { 288 &etm7 {
289 status = "okay"; 289 status = "okay";
290 }; 290 };
291 291
292 &etm8 { 292 &etm8 {
293 status = "okay"; 293 status = "okay";
294 }; 294 };
295 295
296 &etr { 296 &etr {
297 status = "okay"; 297 status = "okay";
298 }; 298 };
299 299
300 &funnel1 { 300 &funnel1 {
301 status = "okay"; 301 status = "okay";
302 }; 302 };
303 303
304 &funnel2 { 304 &funnel2 {
305 status = "okay"; 305 status = "okay";
306 }; 306 };
307 307
308 &funnel3 { 308 &funnel3 {
309 status = "okay"; 309 status = "okay";
310 }; 310 };
311 311
312 &funnel4 { 312 &funnel4 {
313 /* FIXME: Figure out why clock late_in !! 313 // FIXME: Figure out why clock late_initcall crashes the board with
>> 314 // this enabled.
>> 315 // status = "okay";
314 }; 316 };
315 317
316 &funnel5 { 318 &funnel5 {
317 /* FIXME: Figure out why clock late_in !! 319 // FIXME: Figure out why clock late_initcall crashes the board with
>> 320 // this enabled.
>> 321 // status = "okay";
318 }; 322 };
319 323
320 &pcie0 { 324 &pcie0 {
321 status = "okay"; 325 status = "okay";
322 }; 326 };
323 327
324 &pcie_phy { 328 &pcie_phy {
325 status = "okay"; 329 status = "okay";
326 }; 330 };
327 331
328 &pm8005_regulators { 332 &pm8005_regulators {
329 vdd_s1-supply = <&vph_pwr>; 333 vdd_s1-supply = <&vph_pwr>;
330 334
331 pm8005_s1: s1 { /* VDD_GFX supply */ 335 pm8005_s1: s1 { /* VDD_GFX supply */
332 regulator-min-microvolt = <524 336 regulator-min-microvolt = <524000>;
333 regulator-max-microvolt = <110 337 regulator-max-microvolt = <1100000>;
334 regulator-enable-ramp-delay = 338 regulator-enable-ramp-delay = <500>;
335 339
336 /* Hack until we rig up the gp 340 /* Hack until we rig up the gpu consumer */
337 regulator-always-on; 341 regulator-always-on;
338 }; 342 };
339 }; 343 };
340 344
341 &pm8998_gpios { !! 345 &pm8998_gpio {
342 vol_up_pin_a: vol-up-active-state { 346 vol_up_pin_a: vol-up-active-state {
343 pins = "gpio6"; 347 pins = "gpio6";
344 function = "normal"; 348 function = "normal";
345 bias-pull-up; 349 bias-pull-up;
346 input-enable; 350 input-enable;
347 qcom,drive-strength = <PMIC_GP 351 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
348 }; 352 };
349 353
350 cam_focus_pin_a: cam-focus-btn-active- 354 cam_focus_pin_a: cam-focus-btn-active-state {
351 pins = "gpio7"; 355 pins = "gpio7";
352 function = "normal"; 356 function = "normal";
353 bias-pull-up; 357 bias-pull-up;
354 input-enable; 358 input-enable;
355 qcom,drive-strength = <PMIC_GP 359 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
356 }; 360 };
357 361
358 cam_snapshot_pin_a: cam-snapshot-btn-a 362 cam_snapshot_pin_a: cam-snapshot-btn-active-state {
359 pins = "gpio8"; 363 pins = "gpio8";
360 function = "normal"; 364 function = "normal";
361 bias-pull-up; 365 bias-pull-up;
362 input-enable; 366 input-enable;
363 qcom,drive-strength = <PMIC_GP 367 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
364 }; 368 };
365 }; 369 };
366 370
367 &pm8998_resin { !! 371 &pm8998_pon {
368 linux,code = <KEY_VOLUMEDOWN>; !! 372 resin {
369 status = "okay"; !! 373 compatible = "qcom,pm8941-resin";
>> 374 interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
>> 375 bias-pull-up;
>> 376 debounce = <15625>;
>> 377 linux,code = <KEY_VOLUMEDOWN>;
>> 378 };
370 }; 379 };
371 380
372 &qusb2phy { 381 &qusb2phy {
373 status = "okay"; 382 status = "okay";
374 383
375 vdda-pll-supply = <&vreg_l12a_1p8>; 384 vdda-pll-supply = <&vreg_l12a_1p8>;
376 vdda-phy-dpdm-supply = <&vreg_l24a_3p0 385 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
377 }; 386 };
378 387
379 &replicator1 { 388 &replicator1 {
380 status = "okay"; 389 status = "okay";
381 }; 390 };
382 391
383 &rpm_requests { 392 &rpm_requests {
384 regulators-0 { !! 393 pm8998-regulators {
385 compatible = "qcom,rpm-pm8998- 394 compatible = "qcom,rpm-pm8998-regulators";
386 395
387 vdd_s1-supply = <&vph_pwr>; 396 vdd_s1-supply = <&vph_pwr>;
388 vdd_s2-supply = <&vph_pwr>; 397 vdd_s2-supply = <&vph_pwr>;
389 vdd_s3-supply = <&vph_pwr>; 398 vdd_s3-supply = <&vph_pwr>;
390 vdd_s4-supply = <&vph_pwr>; 399 vdd_s4-supply = <&vph_pwr>;
391 vdd_s5-supply = <&vph_pwr>; 400 vdd_s5-supply = <&vph_pwr>;
392 vdd_s6-supply = <&vph_pwr>; 401 vdd_s6-supply = <&vph_pwr>;
393 vdd_s7-supply = <&vph_pwr>; 402 vdd_s7-supply = <&vph_pwr>;
394 vdd_s8-supply = <&vph_pwr>; 403 vdd_s8-supply = <&vph_pwr>;
395 vdd_s9-supply = <&vph_pwr>; 404 vdd_s9-supply = <&vph_pwr>;
396 vdd_s10-supply = <&vph_pwr>; 405 vdd_s10-supply = <&vph_pwr>;
397 vdd_s11-supply = <&vph_pwr>; 406 vdd_s11-supply = <&vph_pwr>;
398 vdd_s12-supply = <&vph_pwr>; 407 vdd_s12-supply = <&vph_pwr>;
399 vdd_s13-supply = <&vph_pwr>; 408 vdd_s13-supply = <&vph_pwr>;
400 vdd_l1_l27-supply = <&vreg_s7a 409 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
401 vdd_l2_l8_l17-supply = <&vreg_ 410 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
402 vdd_l3_l11-supply = <&vreg_s7a 411 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
403 vdd_l4_l5-supply = <&vreg_s7a_ 412 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
404 vdd_l6-supply = <&vreg_s5a_2p0 413 vdd_l6-supply = <&vreg_s5a_2p04>;
405 vdd_l7_l12_l14_l15-supply = <& 414 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
406 vdd_l9-supply = <&vreg_bob>; 415 vdd_l9-supply = <&vreg_bob>;
407 vdd_l10_l23_l25-supply = <&vre 416 vdd_l10_l23_l25-supply = <&vreg_bob>;
408 vdd_l13_l19_l21-supply = <&vre 417 vdd_l13_l19_l21-supply = <&vreg_bob>;
409 vdd_l16_l28-supply = <&vreg_bo 418 vdd_l16_l28-supply = <&vreg_bob>;
410 vdd_l18_l22-supply = <&vreg_bo 419 vdd_l18_l22-supply = <&vreg_bob>;
411 vdd_l20_l24-supply = <&vreg_bo 420 vdd_l20_l24-supply = <&vreg_bob>;
412 vdd_l26-supply = <&vreg_s3a_1p 421 vdd_l26-supply = <&vreg_s3a_1p35>;
413 vdd_lvs1_lvs2-supply = <&vreg_ 422 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
414 423
415 vreg_s3a_1p35: s3 { 424 vreg_s3a_1p35: s3 {
416 regulator-min-microvol 425 regulator-min-microvolt = <1352000>;
417 regulator-max-microvol 426 regulator-max-microvolt = <1352000>;
418 }; 427 };
419 428
420 vreg_s4a_1p8: s4 { 429 vreg_s4a_1p8: s4 {
421 regulator-min-microvol 430 regulator-min-microvolt = <1800000>;
422 regulator-max-microvol 431 regulator-max-microvolt = <1800000>;
423 regulator-allow-set-lo 432 regulator-allow-set-load;
424 }; 433 };
425 434
426 vreg_s5a_2p04: s5 { 435 vreg_s5a_2p04: s5 {
427 regulator-min-microvol 436 regulator-min-microvolt = <1904000>;
428 regulator-max-microvol 437 regulator-max-microvolt = <2040000>;
429 }; 438 };
430 439
431 vreg_s7a_1p025: s7 { 440 vreg_s7a_1p025: s7 {
432 regulator-min-microvol 441 regulator-min-microvolt = <900000>;
433 regulator-max-microvol 442 regulator-max-microvolt = <1028000>;
434 }; 443 };
435 444
436 vreg_l1a_0p875: l1 { 445 vreg_l1a_0p875: l1 {
437 regulator-min-microvol 446 regulator-min-microvolt = <880000>;
438 regulator-max-microvol 447 regulator-max-microvolt = <880000>;
439 }; 448 };
440 449
441 vreg_l2a_1p2: l2 { 450 vreg_l2a_1p2: l2 {
442 regulator-min-microvol 451 regulator-min-microvolt = <1200000>;
443 regulator-max-microvol 452 regulator-max-microvolt = <1200000>;
444 }; 453 };
445 454
446 vreg_l3a_1p0: l3 { 455 vreg_l3a_1p0: l3 {
447 regulator-min-microvol 456 regulator-min-microvolt = <1000000>;
448 regulator-max-microvol 457 regulator-max-microvolt = <1000000>;
449 }; 458 };
450 459
451 vreg_l5a_0p8: l5 { 460 vreg_l5a_0p8: l5 {
452 regulator-min-microvol 461 regulator-min-microvolt = <800000>;
453 regulator-max-microvol 462 regulator-max-microvolt = <800000>;
454 }; 463 };
455 464
456 vreg_l6a_1p8: l6 { 465 vreg_l6a_1p8: l6 {
457 regulator-min-microvol 466 regulator-min-microvolt = <1808000>;
458 regulator-max-microvol 467 regulator-max-microvolt = <1808000>;
459 }; 468 };
460 469
461 vreg_l7a_1p8: l7 { 470 vreg_l7a_1p8: l7 {
462 regulator-min-microvol 471 regulator-min-microvolt = <1800000>;
463 regulator-max-microvol 472 regulator-max-microvolt = <1800000>;
464 }; 473 };
465 474
466 vreg_l8a_1p2: l8 { 475 vreg_l8a_1p2: l8 {
467 regulator-min-microvol 476 regulator-min-microvolt = <1200000>;
468 regulator-max-microvol 477 regulator-max-microvolt = <1200000>;
469 }; 478 };
470 479
471 vreg_l9a_1p8: l9 { 480 vreg_l9a_1p8: l9 {
472 regulator-min-microvol 481 regulator-min-microvolt = <1808000>;
473 regulator-max-microvol 482 regulator-max-microvolt = <2960000>;
474 }; 483 };
475 484
476 vreg_l10a_1p8: l10 { 485 vreg_l10a_1p8: l10 {
477 regulator-min-microvol 486 regulator-min-microvolt = <1808000>;
478 regulator-max-microvol 487 regulator-max-microvolt = <2960000>;
479 }; 488 };
480 489
481 vreg_l11a_1p0: l11 { 490 vreg_l11a_1p0: l11 {
482 regulator-min-microvol 491 regulator-min-microvolt = <1000000>;
483 regulator-max-microvol 492 regulator-max-microvolt = <1000000>;
484 }; 493 };
485 494
486 vreg_l12a_1p8: l12 { 495 vreg_l12a_1p8: l12 {
487 regulator-min-microvol 496 regulator-min-microvolt = <1800000>;
488 regulator-max-microvol 497 regulator-max-microvolt = <1800000>;
489 }; 498 };
490 499
491 vreg_l13a_2p95: l13 { 500 vreg_l13a_2p95: l13 {
492 regulator-min-microvol 501 regulator-min-microvolt = <1808000>;
493 regulator-max-microvol 502 regulator-max-microvolt = <2960000>;
494 }; 503 };
495 504
496 vreg_l14a_1p88: l14 { 505 vreg_l14a_1p88: l14 {
497 regulator-min-microvol 506 regulator-min-microvolt = <1880000>;
498 regulator-max-microvol 507 regulator-max-microvolt = <1880000>;
499 }; 508 };
500 509
501 vreg_l15a_1p8: l15 { 510 vreg_l15a_1p8: l15 {
502 regulator-min-microvol 511 regulator-min-microvolt = <1800000>;
503 regulator-max-microvol 512 regulator-max-microvolt = <1800000>;
504 }; 513 };
505 514
506 vreg_l16a_2p7: l16 { 515 vreg_l16a_2p7: l16 {
507 regulator-min-microvol 516 regulator-min-microvolt = <2704000>;
508 regulator-max-microvol 517 regulator-max-microvolt = <2704000>;
509 }; 518 };
510 519
511 vreg_l17a_1p3: l17 { 520 vreg_l17a_1p3: l17 {
512 regulator-min-microvol 521 regulator-min-microvolt = <1304000>;
513 regulator-max-microvol 522 regulator-max-microvolt = <1304000>;
514 }; 523 };
515 524
516 vreg_l18a_2p7: l18 { 525 vreg_l18a_2p7: l18 {
517 regulator-min-microvol 526 regulator-min-microvolt = <2704000>;
518 regulator-max-microvol 527 regulator-max-microvolt = <2704000>;
519 }; 528 };
520 529
521 vreg_l19a_3p0: l19 { 530 vreg_l19a_3p0: l19 {
522 regulator-min-microvol 531 regulator-min-microvolt = <3008000>;
523 regulator-max-microvol 532 regulator-max-microvolt = <3008000>;
524 }; 533 };
525 534
526 vreg_l20a_2p95: l20 { 535 vreg_l20a_2p95: l20 {
527 regulator-min-microvol 536 regulator-min-microvolt = <2960000>;
528 regulator-max-microvol 537 regulator-max-microvolt = <2960000>;
529 regulator-allow-set-lo 538 regulator-allow-set-load;
530 }; 539 };
531 540
532 vreg_l21a_2p95: l21 { 541 vreg_l21a_2p95: l21 {
533 regulator-min-microvol 542 regulator-min-microvolt = <2960000>;
534 regulator-max-microvol 543 regulator-max-microvolt = <2960000>;
535 regulator-system-load 544 regulator-system-load = <800000>;
536 regulator-allow-set-lo 545 regulator-allow-set-load;
537 }; 546 };
538 547
539 vreg_l22a_2p85: l22 { 548 vreg_l22a_2p85: l22 {
540 regulator-min-microvol 549 regulator-min-microvolt = <2864000>;
541 regulator-max-microvol 550 regulator-max-microvolt = <2864000>;
542 }; 551 };
543 552
544 vreg_l23a_3p3: l23 { 553 vreg_l23a_3p3: l23 {
545 regulator-min-microvol 554 regulator-min-microvolt = <3312000>;
546 regulator-max-microvol 555 regulator-max-microvolt = <3312000>;
547 }; 556 };
548 557
549 vreg_l24a_3p075: l24 { 558 vreg_l24a_3p075: l24 {
550 regulator-min-microvol 559 regulator-min-microvolt = <3088000>;
551 regulator-max-microvol 560 regulator-max-microvolt = <3088000>;
552 }; 561 };
553 562
554 vreg_l25a_3p3: l25 { 563 vreg_l25a_3p3: l25 {
555 regulator-min-microvol 564 regulator-min-microvolt = <3104000>;
556 regulator-max-microvol 565 regulator-max-microvolt = <3312000>;
557 }; 566 };
558 567
559 vreg_l26a_1p2: l26 { 568 vreg_l26a_1p2: l26 {
560 regulator-min-microvol 569 regulator-min-microvolt = <1200000>;
561 regulator-max-microvol 570 regulator-max-microvolt = <1200000>;
562 regulator-allow-set-lo 571 regulator-allow-set-load;
563 }; 572 };
564 573
565 vreg_l28_3p0: l28 { 574 vreg_l28_3p0: l28 {
566 regulator-min-microvol 575 regulator-min-microvolt = <3008000>;
567 regulator-max-microvol 576 regulator-max-microvolt = <3008000>;
568 }; 577 };
569 578
570 vreg_lvs1a_1p8: lvs1 { 579 vreg_lvs1a_1p8: lvs1 {
571 regulator-min-microvol 580 regulator-min-microvolt = <1800000>;
572 regulator-max-microvol 581 regulator-max-microvolt = <1800000>;
573 }; 582 };
574 583
575 vreg_lvs2a_1p8: lvs2 { 584 vreg_lvs2a_1p8: lvs2 {
576 regulator-min-microvol 585 regulator-min-microvolt = <1800000>;
577 regulator-max-microvol 586 regulator-max-microvolt = <1800000>;
578 }; 587 };
579 588
580 }; 589 };
581 590
582 regulators-1 { !! 591 pmi8998-regulators {
583 compatible = "qcom,rpm-pmi8998 592 compatible = "qcom,rpm-pmi8998-regulators";
584 593
585 vdd_bob-supply = <&vph_pwr>; 594 vdd_bob-supply = <&vph_pwr>;
586 595
587 vreg_bob: bob { 596 vreg_bob: bob {
588 regulator-min-microvol 597 regulator-min-microvolt = <3312000>;
589 regulator-max-microvol 598 regulator-max-microvolt = <3600000>;
590 }; 599 };
591 }; 600 };
592 }; 601 };
593 602
594 &remoteproc_adsp { 603 &remoteproc_adsp {
595 status = "okay"; 604 status = "okay";
596 }; 605 };
597 606
598 &remoteproc_mss { 607 &remoteproc_mss {
599 status = "okay"; 608 status = "okay";
600 }; 609 };
601 610
602 &remoteproc_slpi { 611 &remoteproc_slpi {
603 status = "okay"; 612 status = "okay";
604 }; 613 };
605 614
606 &tlmm { 615 &tlmm {
607 gpio-reserved-ranges = <0 4>; 616 gpio-reserved-ranges = <0 4>;
608 617
609 mdp_vsync_n: mdp-vsync-n-state { !! 618 mdp_vsync_n: mdp-vsync-n {
610 pins = "gpio10"; 619 pins = "gpio10";
611 function = "mdp_vsync_a"; 620 function = "mdp_vsync_a";
612 bias-pull-down; 621 bias-pull-down;
613 drive-strength = <2>; 622 drive-strength = <2>;
614 }; 623 };
615 624
616 gpio_kb_pins_extra: gpio-kb-pins-extra !! 625 gpio_kb_pins_extra: gpio-kb-pins-extra {
617 pins = "gpio21", "gpio32", "gp 626 pins = "gpio21", "gpio32", "gpio33", "gpio114",
618 "gpio128", "gpio129"; 627 "gpio128", "gpio129";
619 function = "gpio"; 628 function = "gpio";
620 drive-strength = <2>; 629 drive-strength = <2>;
621 bias-pull-up; 630 bias-pull-up;
622 }; 631 };
623 632
624 ts_vio_default: ts-vio-def-state { !! 633 ts_vio_default: ts-vio-def {
625 pins = "gpio81"; 634 pins = "gpio81";
626 function = "gpio"; 635 function = "gpio";
627 bias-disable; 636 bias-disable;
628 drive-strength = <2>; 637 drive-strength = <2>;
629 }; 638 };
630 639
631 ts_rst_n: ts-rst-n-state { !! 640 ts_rst_n: ts-rst-n {
632 pins = "gpio89"; 641 pins = "gpio89";
633 function = "gpio"; 642 function = "gpio";
634 bias-pull-up; 643 bias-pull-up;
635 drive-strength = <8>; 644 drive-strength = <8>;
636 }; 645 };
637 646
638 hall_sensor1_default: hall-sensor1-def !! 647 hall_sensor1_default: hall-sensor1-def {
639 pins = "gpio124"; 648 pins = "gpio124";
640 function = "gpio"; 649 function = "gpio";
641 bias-disable; 650 bias-disable;
642 drive-strength = <2>; 651 drive-strength = <2>;
>> 652 input-enable;
643 }; 653 };
644 654
645 ts_int_n: ts-int-n-state { !! 655 ts_int_n: ts-int-n {
646 pins = "gpio125"; 656 pins = "gpio125";
647 function = "gpio"; 657 function = "gpio";
648 bias-disable; 658 bias-disable;
649 drive-strength = <8>; 659 drive-strength = <8>;
650 }; 660 };
651 }; 661 };
652 662
653 &sdhc2 { 663 &sdhc2 {
654 status = "okay"; 664 status = "okay";
655 cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; 665 cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
656 666
657 vmmc-supply = <&vreg_l21a_2p95>; 667 vmmc-supply = <&vreg_l21a_2p95>;
658 vqmmc-supply = <&vreg_l13a_2p95>; 668 vqmmc-supply = <&vreg_l13a_2p95>;
659 669
660 pinctrl-names = "default", "sleep"; 670 pinctrl-names = "default", "sleep";
661 pinctrl-0 = <&sdc2_on &sdc2_cd>; 671 pinctrl-0 = <&sdc2_on &sdc2_cd>;
662 pinctrl-1 = <&sdc2_off &sdc2_cd>; 672 pinctrl-1 = <&sdc2_off &sdc2_cd>;
663 }; 673 };
664 674
665 &stm { 675 &stm {
666 status = "okay"; 676 status = "okay";
667 }; 677 };
668 678
669 &ufshc { 679 &ufshc {
670 status = "okay"; 680 status = "okay";
671 vcc-supply = <&vreg_l20a_2p95>; 681 vcc-supply = <&vreg_l20a_2p95>;
672 vccq-supply = <&vreg_l26a_1p2>; 682 vccq-supply = <&vreg_l26a_1p2>;
673 vccq2-supply = <&vreg_s4a_1p8>; 683 vccq2-supply = <&vreg_s4a_1p8>;
674 vdd-hba-supply = <&vreg_l26a_1p2>; <<
675 vcc-max-microamp = <750000>; 684 vcc-max-microamp = <750000>;
676 vccq-max-microamp = <560000>; 685 vccq-max-microamp = <560000>;
677 vccq2-max-microamp = <750000>; 686 vccq2-max-microamp = <750000>;
678 }; 687 };
679 688
680 &ufsphy { 689 &ufsphy {
681 status = "okay"; 690 status = "okay";
682 vdda-phy-supply = <&vreg_l1a_0p875>; 691 vdda-phy-supply = <&vreg_l1a_0p875>;
683 vdda-pll-supply = <&vreg_l2a_1p2>; 692 vdda-pll-supply = <&vreg_l2a_1p2>;
>> 693 vddp-ref-clk-supply = <&vreg_l26a_1p2>;
684 }; 694 };
685 695
686 &usb3 { 696 &usb3 {
687 status = "okay"; 697 status = "okay";
688 }; 698 };
689 699
690 &usb3_dwc3 { 700 &usb3_dwc3 {
691 dr_mode = "peripheral"; 701 dr_mode = "peripheral";
692 extcon = <&extcon_usb>; 702 extcon = <&extcon_usb>;
693 }; 703 };
694 704
695 &usb3phy { 705 &usb3phy {
696 status = "okay"; 706 status = "okay";
697 707
698 vdda-phy-supply = <&vreg_l1a_0p875>; 708 vdda-phy-supply = <&vreg_l1a_0p875>;
699 vdda-pll-supply = <&vreg_l2a_1p2>; 709 vdda-pll-supply = <&vreg_l2a_1p2>;
700 }; 710 };
701 711
702 /* GT9286 analog supply */ 712 /* GT9286 analog supply */
703 &vreg_l28_3p0 { 713 &vreg_l28_3p0 {
704 regulator-min-microvolt = <2800000>; 714 regulator-min-microvolt = <2800000>;
705 regulator-max-microvolt = <2800000>; 715 regulator-max-microvolt = <2800000>;
706 }; 716 };
707 717
708 &wifi { 718 &wifi {
709 status = "okay"; 719 status = "okay";
710 720
711 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8> 721 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
712 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 722 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
713 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 723 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
714 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 724 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
715 }; 725 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.