1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2021, AngeloGioacchino Del Re 3 * Copyright (c) 2021, AngeloGioacchino Del Regno
4 * <angelogioacchino.delreg 4 * <angelogioacchino.delregno@somainline.org>
5 */ 5 */
6 6
7 /dts-v1/; 7 /dts-v1/;
8 8
9 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h> 10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
12 #include "msm8998.dtsi" 12 #include "msm8998.dtsi"
13 #include "pm8005.dtsi" 13 #include "pm8005.dtsi"
14 #include "pm8998.dtsi" 14 #include "pm8998.dtsi"
15 #include "pmi8998.dtsi" 15 #include "pmi8998.dtsi"
16 16
17 / { 17 / {
18 model = "F(x)tec Pro1 (QX1000)"; 18 model = "F(x)tec Pro1 (QX1000)";
19 compatible = "fxtec,pro1", "qcom,msm89 19 compatible = "fxtec,pro1", "qcom,msm8998";
20 chassis-type = "handset"; 20 chassis-type = "handset";
21 qcom,board-id = <0x02000b 0x10>; 21 qcom,board-id = <0x02000b 0x10>;
22 22
23 aliases { 23 aliases {
24 serial0 = &blsp2_uart1; 24 serial0 = &blsp2_uart1;
25 serial1 = &blsp1_uart3; 25 serial1 = &blsp1_uart3;
26 }; 26 };
27 27
28 /* 28 /*
29 * Until we hook up type-c detection, 29 * Until we hook up type-c detection, we
30 * have to stick with this. But it wor 30 * have to stick with this. But it works.
31 */ 31 */
32 extcon_usb: extcon-usb { 32 extcon_usb: extcon-usb {
33 compatible = "linux,extcon-usb 33 compatible = "linux,extcon-usb-gpio";
34 id-gpios = <&tlmm 38 GPIO_ACTI !! 34 id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
35 }; 35 };
36 36
37 gpio-hall-sensors { 37 gpio-hall-sensors {
38 compatible = "gpio-keys"; 38 compatible = "gpio-keys";
39 label = "Hall sensors"; 39 label = "Hall sensors";
40 pinctrl-names = "default"; 40 pinctrl-names = "default";
41 pinctrl-0 = <&hall_sensor1_def 41 pinctrl-0 = <&hall_sensor1_default>;
42 42
43 event-hall-sensor1 { 43 event-hall-sensor1 {
44 label = "Keyboard Hall 44 label = "Keyboard Hall Sensor";
45 gpios = <&tlmm 124 GPI 45 gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
46 debounce-interval = <1 46 debounce-interval = <15>;
47 wakeup-source; 47 wakeup-source;
48 linux,input-type = <EV 48 linux,input-type = <EV_SW>;
49 linux,code = <SW_KEYPA 49 linux,code = <SW_KEYPAD_SLIDE>;
50 }; 50 };
51 }; 51 };
52 52
53 gpio-kb-extra-keys { 53 gpio-kb-extra-keys {
54 compatible = "gpio-keys"; 54 compatible = "gpio-keys";
55 label = "Keyboard extra keys"; 55 label = "Keyboard extra keys";
56 pinctrl-names = "default"; 56 pinctrl-names = "default";
57 pinctrl-0 = <&gpio_kb_pins_ext 57 pinctrl-0 = <&gpio_kb_pins_extra>;
58 58
59 key-home { 59 key-home {
60 label = "Home"; 60 label = "Home";
61 gpios = <&tlmm 21 GPIO 61 gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
62 linux,code = <KEY_HOME 62 linux,code = <KEY_HOMEPAGE>;
63 debounce-interval = <1 63 debounce-interval = <15>;
64 linux,can-disable; 64 linux,can-disable;
65 }; 65 };
66 66
67 key-super-l { 67 key-super-l {
68 label = "Super Left"; 68 label = "Super Left";
69 gpios = <&tlmm 32 GPIO 69 gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
70 linux,code = <KEY_FN>; 70 linux,code = <KEY_FN>;
71 debounce-interval = <1 71 debounce-interval = <15>;
72 linux,can-disable; 72 linux,can-disable;
73 }; 73 };
74 74
75 key-super-r { 75 key-super-r {
76 label = "Super Right"; 76 label = "Super Right";
77 gpios = <&tlmm 33 GPIO 77 gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
78 linux,code = <KEY_FN>; 78 linux,code = <KEY_FN>;
79 debounce-interval = <1 79 debounce-interval = <15>;
80 linux,can-disable; 80 linux,can-disable;
81 }; 81 };
82 82
83 key-shift { 83 key-shift {
84 label = "Shift"; 84 label = "Shift";
85 gpios = <&tlmm 114 GPI 85 gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
86 linux,code = <KEY_RIGH 86 linux,code = <KEY_RIGHTSHIFT>;
87 debounce-interval = <1 87 debounce-interval = <15>;
88 linux,can-disable; 88 linux,can-disable;
89 }; 89 };
90 90
91 key-ctrl { 91 key-ctrl {
92 label = "Ctrl"; 92 label = "Ctrl";
93 gpios = <&tlmm 128 GPI 93 gpios = <&tlmm 128 GPIO_ACTIVE_LOW>;
94 linux,code = <KEY_LEFT 94 linux,code = <KEY_LEFTCTRL>;
95 debounce-interval = <1 95 debounce-interval = <15>;
96 linux,can-disable; 96 linux,can-disable;
97 }; 97 };
98 98
99 key-alt { 99 key-alt {
100 label = "Alt"; 100 label = "Alt";
101 gpios = <&tlmm 129 GPI 101 gpios = <&tlmm 129 GPIO_ACTIVE_LOW>;
102 linux,code = <KEY_LEFT 102 linux,code = <KEY_LEFTALT>;
103 debounce-interval = <1 103 debounce-interval = <15>;
104 linux,can-disable; 104 linux,can-disable;
105 }; 105 };
106 }; 106 };
107 107
108 gpio-keys { 108 gpio-keys {
109 compatible = "gpio-keys"; 109 compatible = "gpio-keys";
110 label = "Side buttons"; 110 label = "Side buttons";
111 pinctrl-names = "default"; 111 pinctrl-names = "default";
112 pinctrl-0 = <&vol_up_pin_a>, < 112 pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
113 <&cam_snapshot_pin 113 <&cam_snapshot_pin_a>;
114 button-vol-up { 114 button-vol-up {
115 label = "Volume Up"; 115 label = "Volume Up";
116 gpios = <&pm8998_gpios 116 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
117 linux,input-type = <EV 117 linux,input-type = <EV_KEY>;
118 linux,code = <KEY_VOLU 118 linux,code = <KEY_VOLUMEUP>;
119 wakeup-source; 119 wakeup-source;
120 debounce-interval = <1 120 debounce-interval = <15>;
121 }; 121 };
122 122
123 button-camera-snapshot { 123 button-camera-snapshot {
124 label = "Camera Snapsh 124 label = "Camera Snapshot";
125 gpios = <&pm8998_gpios 125 gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
126 linux,input-type = <EV 126 linux,input-type = <EV_KEY>;
127 linux,code = <KEY_CAME 127 linux,code = <KEY_CAMERA>;
128 debounce-interval = <1 128 debounce-interval = <15>;
129 }; 129 };
130 130
131 button-camera-focus { 131 button-camera-focus {
132 label = "Camera Focus" 132 label = "Camera Focus";
133 gpios = <&pm8998_gpios 133 gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
134 linux,input-type = <EV 134 linux,input-type = <EV_KEY>;
135 linux,code = <KEY_CAME 135 linux,code = <KEY_CAMERA_FOCUS>;
136 debounce-interval = <1 136 debounce-interval = <15>;
137 }; 137 };
138 }; 138 };
139 139
140 keyboard-leds { 140 keyboard-leds {
141 compatible = "gpio-leds"; 141 compatible = "gpio-leds";
142 142
143 led-0 { 143 led-0 {
144 color = <LED_COLOR_ID_ 144 color = <LED_COLOR_ID_WHITE>;
145 default-state = "off"; 145 default-state = "off";
146 function = LED_FUNCTIO 146 function = LED_FUNCTION_KBD_BACKLIGHT;
147 gpios = <&tlmm 16 GPIO 147 gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
148 label = "white:kbd_bac 148 label = "white:kbd_backlight";
149 retain-state-suspended 149 retain-state-suspended;
150 }; 150 };
151 151
152 led-1 { 152 led-1 {
153 color = <LED_COLOR_ID_ 153 color = <LED_COLOR_ID_YELLOW>;
154 default-state = "off"; 154 default-state = "off";
155 function = LED_FUNCTIO 155 function = LED_FUNCTION_CAPSLOCK;
156 gpios = <&tlmm 26 GPIO 156 gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
157 label = "yellow:capslo 157 label = "yellow:capslock";
158 linux,default-trigger 158 linux,default-trigger = "kbd-capslock";
159 }; 159 };
160 }; 160 };
161 161
162 reserved-memory { 162 reserved-memory {
163 cont_splash_mem: memory@9d4000 163 cont_splash_mem: memory@9d400000 {
164 reg = <0x0 0x9d400000 164 reg = <0x0 0x9d400000 0x0 0x2000000>;
165 no-map; 165 no-map;
166 }; 166 };
167 167
168 zap_shader_region: memory@f640 168 zap_shader_region: memory@f6400000 {
169 compatible = "shared-d 169 compatible = "shared-dma-pool";
170 reg = <0x0 0xf6400000 170 reg = <0x0 0xf6400000 0x0 0x2000>;
171 no-map; 171 no-map;
172 }; 172 };
173 173
174 ramoops@ffc00000 { 174 ramoops@ffc00000 {
175 compatible = "ramoops" 175 compatible = "ramoops";
176 reg = <0x0 0xffc00000 176 reg = <0x0 0xffc00000 0x0 0x100000>;
177 console-size = <0x6000 177 console-size = <0x60000>;
178 ecc-size = <16>; 178 ecc-size = <16>;
179 ftrace-size = <0x10000 179 ftrace-size = <0x10000>;
180 pmsg-size = <0x20000>; 180 pmsg-size = <0x20000>;
181 record-size = <0x10000 181 record-size = <0x10000>;
182 }; 182 };
183 }; 183 };
184 184
185 ts_vio_vreg: ts-vio-vreg { 185 ts_vio_vreg: ts-vio-vreg {
186 compatible = "regulator-fixed" 186 compatible = "regulator-fixed";
187 regulator-name = "ts_vio_reg"; 187 regulator-name = "ts_vio_reg";
188 startup-delay-us = <2>; 188 startup-delay-us = <2>;
189 enable-active-high; 189 enable-active-high;
190 gpio = <&tlmm 81 GPIO_ACTIVE_H 190 gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
191 pinctrl-names = "default"; 191 pinctrl-names = "default";
192 pinctrl-0 = <&ts_vio_default>; 192 pinctrl-0 = <&ts_vio_default>;
193 regulator-always-on; 193 regulator-always-on;
194 }; 194 };
195 195
196 vph_pwr: vph-pwr-regulator { 196 vph_pwr: vph-pwr-regulator {
197 compatible = "regulator-fixed" 197 compatible = "regulator-fixed";
198 regulator-name = "vph_pwr"; 198 regulator-name = "vph_pwr";
199 regulator-always-on; 199 regulator-always-on;
200 regulator-boot-on; 200 regulator-boot-on;
201 }; 201 };
202 }; 202 };
203 203
204 &blsp1_uart3 { 204 &blsp1_uart3 {
205 status = "okay"; 205 status = "okay";
206 206
207 bluetooth { 207 bluetooth {
208 compatible = "qcom,wcn3990-bt" 208 compatible = "qcom,wcn3990-bt";
209 209
210 vddio-supply = <&vreg_s4a_1p8> 210 vddio-supply = <&vreg_s4a_1p8>;
211 vddxo-supply = <&vreg_l7a_1p8> 211 vddxo-supply = <&vreg_l7a_1p8>;
212 vddrf-supply = <&vreg_l17a_1p3 212 vddrf-supply = <&vreg_l17a_1p3>;
213 vddch0-supply = <&vreg_l25a_3p 213 vddch0-supply = <&vreg_l25a_3p3>;
214 max-speed = <3200000>; 214 max-speed = <3200000>;
215 }; 215 };
216 }; 216 };
217 217
218 &blsp1_uart3_on { 218 &blsp1_uart3_on {
219 rx-pins { 219 rx-pins {
220 /delete-property/ bias-disable 220 /delete-property/ bias-disable;
221 /* 221 /*
222 * Configure a pull-up on 45 ( 222 * Configure a pull-up on 45 (RX). This is needed to
223 * avoid garbage data when the 223 * avoid garbage data when the TX pin of the Bluetooth
224 * module is in tri-state (mod 224 * module is in tri-state (module powered off or not
225 * driving the signal yet). 225 * driving the signal yet).
226 */ 226 */
227 bias-pull-up; 227 bias-pull-up;
228 }; 228 };
229 229
230 cts-pins { 230 cts-pins {
231 /delete-property/ bias-disable 231 /delete-property/ bias-disable;
232 /* 232 /*
233 * Configure a pull-down on 47 233 * Configure a pull-down on 47 (CTS) to match the pull
234 * of the Bluetooth module. 234 * of the Bluetooth module.
235 */ 235 */
236 bias-pull-down; 236 bias-pull-down;
237 }; 237 };
238 }; 238 };
239 239
240 &blsp2_uart1 { 240 &blsp2_uart1 {
241 status = "okay"; 241 status = "okay";
242 }; 242 };
243 243
244 &blsp2_i2c1 { 244 &blsp2_i2c1 {
245 status = "okay"; 245 status = "okay";
246 246
247 touchscreen@14 { 247 touchscreen@14 {
248 compatible = "goodix,gt9286"; 248 compatible = "goodix,gt9286";
249 reg = <0x14>; 249 reg = <0x14>;
250 interrupt-parent = <&tlmm>; 250 interrupt-parent = <&tlmm>;
251 interrupts = <125 IRQ_TYPE_LEV 251 interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
252 reset-gpios = <&tlmm 89 GPIO_A 252 reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
253 AVDD28-supply = <&vreg_l28_3p0 253 AVDD28-supply = <&vreg_l28_3p0>;
254 VDDIO-supply = <&ts_vio_vreg>; 254 VDDIO-supply = <&ts_vio_vreg>;
255 pinctrl-names = "active"; 255 pinctrl-names = "active";
256 pinctrl-0 = <&ts_rst_n>, <&ts_ 256 pinctrl-0 = <&ts_rst_n>, <&ts_int_n>;
257 }; 257 };
258 }; 258 };
259 259
260 &etf { 260 &etf {
261 status = "okay"; 261 status = "okay";
262 }; 262 };
263 263
264 &etm1 { 264 &etm1 {
265 status = "okay"; 265 status = "okay";
266 }; 266 };
267 267
268 &etm2 { 268 &etm2 {
269 status = "okay"; 269 status = "okay";
270 }; 270 };
271 271
272 &etm3 { 272 &etm3 {
273 status = "okay"; 273 status = "okay";
274 }; 274 };
275 275
276 &etm4 { 276 &etm4 {
277 status = "okay"; 277 status = "okay";
278 }; 278 };
279 279
280 &etm5 { 280 &etm5 {
281 status = "okay"; 281 status = "okay";
282 }; 282 };
283 283
284 &etm6 { 284 &etm6 {
285 status = "okay"; 285 status = "okay";
286 }; 286 };
287 287
288 &etm7 { 288 &etm7 {
289 status = "okay"; 289 status = "okay";
290 }; 290 };
291 291
292 &etm8 { 292 &etm8 {
293 status = "okay"; 293 status = "okay";
294 }; 294 };
295 295
296 &etr { 296 &etr {
297 status = "okay"; 297 status = "okay";
298 }; 298 };
299 299
300 &funnel1 { 300 &funnel1 {
301 status = "okay"; 301 status = "okay";
302 }; 302 };
303 303
304 &funnel2 { 304 &funnel2 {
305 status = "okay"; 305 status = "okay";
306 }; 306 };
307 307
308 &funnel3 { 308 &funnel3 {
309 status = "okay"; 309 status = "okay";
310 }; 310 };
311 311
312 &funnel4 { 312 &funnel4 {
313 /* FIXME: Figure out why clock late_in 313 /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
314 }; 314 };
315 315
316 &funnel5 { 316 &funnel5 {
317 /* FIXME: Figure out why clock late_in 317 /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
318 }; 318 };
319 319
320 &pcie0 { 320 &pcie0 {
321 status = "okay"; 321 status = "okay";
322 }; 322 };
323 323
324 &pcie_phy { 324 &pcie_phy {
325 status = "okay"; 325 status = "okay";
326 }; 326 };
327 327
328 &pm8005_regulators { 328 &pm8005_regulators {
329 vdd_s1-supply = <&vph_pwr>; 329 vdd_s1-supply = <&vph_pwr>;
330 330
331 pm8005_s1: s1 { /* VDD_GFX supply */ 331 pm8005_s1: s1 { /* VDD_GFX supply */
332 regulator-min-microvolt = <524 332 regulator-min-microvolt = <524000>;
333 regulator-max-microvolt = <110 333 regulator-max-microvolt = <1100000>;
334 regulator-enable-ramp-delay = 334 regulator-enable-ramp-delay = <500>;
335 335
336 /* Hack until we rig up the gp 336 /* Hack until we rig up the gpu consumer */
337 regulator-always-on; 337 regulator-always-on;
338 }; 338 };
339 }; 339 };
340 340
341 &pm8998_gpios { 341 &pm8998_gpios {
342 vol_up_pin_a: vol-up-active-state { 342 vol_up_pin_a: vol-up-active-state {
343 pins = "gpio6"; 343 pins = "gpio6";
344 function = "normal"; 344 function = "normal";
345 bias-pull-up; 345 bias-pull-up;
346 input-enable; 346 input-enable;
347 qcom,drive-strength = <PMIC_GP 347 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
348 }; 348 };
349 349
350 cam_focus_pin_a: cam-focus-btn-active- 350 cam_focus_pin_a: cam-focus-btn-active-state {
351 pins = "gpio7"; 351 pins = "gpio7";
352 function = "normal"; 352 function = "normal";
353 bias-pull-up; 353 bias-pull-up;
354 input-enable; 354 input-enable;
355 qcom,drive-strength = <PMIC_GP 355 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
356 }; 356 };
357 357
358 cam_snapshot_pin_a: cam-snapshot-btn-a 358 cam_snapshot_pin_a: cam-snapshot-btn-active-state {
359 pins = "gpio8"; 359 pins = "gpio8";
360 function = "normal"; 360 function = "normal";
361 bias-pull-up; 361 bias-pull-up;
362 input-enable; 362 input-enable;
363 qcom,drive-strength = <PMIC_GP 363 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
364 }; 364 };
365 }; 365 };
366 366
367 &pm8998_resin { 367 &pm8998_resin {
368 linux,code = <KEY_VOLUMEDOWN>; 368 linux,code = <KEY_VOLUMEDOWN>;
369 status = "okay"; 369 status = "okay";
370 }; 370 };
371 371
372 &qusb2phy { 372 &qusb2phy {
373 status = "okay"; 373 status = "okay";
374 374
375 vdda-pll-supply = <&vreg_l12a_1p8>; 375 vdda-pll-supply = <&vreg_l12a_1p8>;
376 vdda-phy-dpdm-supply = <&vreg_l24a_3p0 376 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
377 }; 377 };
378 378
379 &replicator1 { 379 &replicator1 {
380 status = "okay"; 380 status = "okay";
381 }; 381 };
382 382
383 &rpm_requests { 383 &rpm_requests {
384 regulators-0 { 384 regulators-0 {
385 compatible = "qcom,rpm-pm8998- 385 compatible = "qcom,rpm-pm8998-regulators";
386 386
387 vdd_s1-supply = <&vph_pwr>; 387 vdd_s1-supply = <&vph_pwr>;
388 vdd_s2-supply = <&vph_pwr>; 388 vdd_s2-supply = <&vph_pwr>;
389 vdd_s3-supply = <&vph_pwr>; 389 vdd_s3-supply = <&vph_pwr>;
390 vdd_s4-supply = <&vph_pwr>; 390 vdd_s4-supply = <&vph_pwr>;
391 vdd_s5-supply = <&vph_pwr>; 391 vdd_s5-supply = <&vph_pwr>;
392 vdd_s6-supply = <&vph_pwr>; 392 vdd_s6-supply = <&vph_pwr>;
393 vdd_s7-supply = <&vph_pwr>; 393 vdd_s7-supply = <&vph_pwr>;
394 vdd_s8-supply = <&vph_pwr>; 394 vdd_s8-supply = <&vph_pwr>;
395 vdd_s9-supply = <&vph_pwr>; 395 vdd_s9-supply = <&vph_pwr>;
396 vdd_s10-supply = <&vph_pwr>; 396 vdd_s10-supply = <&vph_pwr>;
397 vdd_s11-supply = <&vph_pwr>; 397 vdd_s11-supply = <&vph_pwr>;
398 vdd_s12-supply = <&vph_pwr>; 398 vdd_s12-supply = <&vph_pwr>;
399 vdd_s13-supply = <&vph_pwr>; 399 vdd_s13-supply = <&vph_pwr>;
400 vdd_l1_l27-supply = <&vreg_s7a 400 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
401 vdd_l2_l8_l17-supply = <&vreg_ 401 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
402 vdd_l3_l11-supply = <&vreg_s7a 402 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
403 vdd_l4_l5-supply = <&vreg_s7a_ 403 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
404 vdd_l6-supply = <&vreg_s5a_2p0 404 vdd_l6-supply = <&vreg_s5a_2p04>;
405 vdd_l7_l12_l14_l15-supply = <& 405 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
406 vdd_l9-supply = <&vreg_bob>; 406 vdd_l9-supply = <&vreg_bob>;
407 vdd_l10_l23_l25-supply = <&vre 407 vdd_l10_l23_l25-supply = <&vreg_bob>;
408 vdd_l13_l19_l21-supply = <&vre 408 vdd_l13_l19_l21-supply = <&vreg_bob>;
409 vdd_l16_l28-supply = <&vreg_bo 409 vdd_l16_l28-supply = <&vreg_bob>;
410 vdd_l18_l22-supply = <&vreg_bo 410 vdd_l18_l22-supply = <&vreg_bob>;
411 vdd_l20_l24-supply = <&vreg_bo 411 vdd_l20_l24-supply = <&vreg_bob>;
412 vdd_l26-supply = <&vreg_s3a_1p 412 vdd_l26-supply = <&vreg_s3a_1p35>;
413 vdd_lvs1_lvs2-supply = <&vreg_ 413 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
414 414
415 vreg_s3a_1p35: s3 { 415 vreg_s3a_1p35: s3 {
416 regulator-min-microvol 416 regulator-min-microvolt = <1352000>;
417 regulator-max-microvol 417 regulator-max-microvolt = <1352000>;
418 }; 418 };
419 419
420 vreg_s4a_1p8: s4 { 420 vreg_s4a_1p8: s4 {
421 regulator-min-microvol 421 regulator-min-microvolt = <1800000>;
422 regulator-max-microvol 422 regulator-max-microvolt = <1800000>;
423 regulator-allow-set-lo 423 regulator-allow-set-load;
424 }; 424 };
425 425
426 vreg_s5a_2p04: s5 { 426 vreg_s5a_2p04: s5 {
427 regulator-min-microvol 427 regulator-min-microvolt = <1904000>;
428 regulator-max-microvol 428 regulator-max-microvolt = <2040000>;
429 }; 429 };
430 430
431 vreg_s7a_1p025: s7 { 431 vreg_s7a_1p025: s7 {
432 regulator-min-microvol 432 regulator-min-microvolt = <900000>;
433 regulator-max-microvol 433 regulator-max-microvolt = <1028000>;
434 }; 434 };
435 435
436 vreg_l1a_0p875: l1 { 436 vreg_l1a_0p875: l1 {
437 regulator-min-microvol 437 regulator-min-microvolt = <880000>;
438 regulator-max-microvol 438 regulator-max-microvolt = <880000>;
439 }; 439 };
440 440
441 vreg_l2a_1p2: l2 { 441 vreg_l2a_1p2: l2 {
442 regulator-min-microvol 442 regulator-min-microvolt = <1200000>;
443 regulator-max-microvol 443 regulator-max-microvolt = <1200000>;
444 }; 444 };
445 445
446 vreg_l3a_1p0: l3 { 446 vreg_l3a_1p0: l3 {
447 regulator-min-microvol 447 regulator-min-microvolt = <1000000>;
448 regulator-max-microvol 448 regulator-max-microvolt = <1000000>;
449 }; 449 };
450 450
451 vreg_l5a_0p8: l5 { 451 vreg_l5a_0p8: l5 {
452 regulator-min-microvol 452 regulator-min-microvolt = <800000>;
453 regulator-max-microvol 453 regulator-max-microvolt = <800000>;
454 }; 454 };
455 455
456 vreg_l6a_1p8: l6 { 456 vreg_l6a_1p8: l6 {
457 regulator-min-microvol 457 regulator-min-microvolt = <1808000>;
458 regulator-max-microvol 458 regulator-max-microvolt = <1808000>;
459 }; 459 };
460 460
461 vreg_l7a_1p8: l7 { 461 vreg_l7a_1p8: l7 {
462 regulator-min-microvol 462 regulator-min-microvolt = <1800000>;
463 regulator-max-microvol 463 regulator-max-microvolt = <1800000>;
464 }; 464 };
465 465
466 vreg_l8a_1p2: l8 { 466 vreg_l8a_1p2: l8 {
467 regulator-min-microvol 467 regulator-min-microvolt = <1200000>;
468 regulator-max-microvol 468 regulator-max-microvolt = <1200000>;
469 }; 469 };
470 470
471 vreg_l9a_1p8: l9 { 471 vreg_l9a_1p8: l9 {
472 regulator-min-microvol 472 regulator-min-microvolt = <1808000>;
473 regulator-max-microvol 473 regulator-max-microvolt = <2960000>;
474 }; 474 };
475 475
476 vreg_l10a_1p8: l10 { 476 vreg_l10a_1p8: l10 {
477 regulator-min-microvol 477 regulator-min-microvolt = <1808000>;
478 regulator-max-microvol 478 regulator-max-microvolt = <2960000>;
479 }; 479 };
480 480
481 vreg_l11a_1p0: l11 { 481 vreg_l11a_1p0: l11 {
482 regulator-min-microvol 482 regulator-min-microvolt = <1000000>;
483 regulator-max-microvol 483 regulator-max-microvolt = <1000000>;
484 }; 484 };
485 485
486 vreg_l12a_1p8: l12 { 486 vreg_l12a_1p8: l12 {
487 regulator-min-microvol 487 regulator-min-microvolt = <1800000>;
488 regulator-max-microvol 488 regulator-max-microvolt = <1800000>;
489 }; 489 };
490 490
491 vreg_l13a_2p95: l13 { 491 vreg_l13a_2p95: l13 {
492 regulator-min-microvol 492 regulator-min-microvolt = <1808000>;
493 regulator-max-microvol 493 regulator-max-microvolt = <2960000>;
494 }; 494 };
495 495
496 vreg_l14a_1p88: l14 { 496 vreg_l14a_1p88: l14 {
497 regulator-min-microvol 497 regulator-min-microvolt = <1880000>;
498 regulator-max-microvol 498 regulator-max-microvolt = <1880000>;
499 }; 499 };
500 500
501 vreg_l15a_1p8: l15 { 501 vreg_l15a_1p8: l15 {
502 regulator-min-microvol 502 regulator-min-microvolt = <1800000>;
503 regulator-max-microvol 503 regulator-max-microvolt = <1800000>;
504 }; 504 };
505 505
506 vreg_l16a_2p7: l16 { 506 vreg_l16a_2p7: l16 {
507 regulator-min-microvol 507 regulator-min-microvolt = <2704000>;
508 regulator-max-microvol 508 regulator-max-microvolt = <2704000>;
509 }; 509 };
510 510
511 vreg_l17a_1p3: l17 { 511 vreg_l17a_1p3: l17 {
512 regulator-min-microvol 512 regulator-min-microvolt = <1304000>;
513 regulator-max-microvol 513 regulator-max-microvolt = <1304000>;
514 }; 514 };
515 515
516 vreg_l18a_2p7: l18 { 516 vreg_l18a_2p7: l18 {
517 regulator-min-microvol 517 regulator-min-microvolt = <2704000>;
518 regulator-max-microvol 518 regulator-max-microvolt = <2704000>;
519 }; 519 };
520 520
521 vreg_l19a_3p0: l19 { 521 vreg_l19a_3p0: l19 {
522 regulator-min-microvol 522 regulator-min-microvolt = <3008000>;
523 regulator-max-microvol 523 regulator-max-microvolt = <3008000>;
524 }; 524 };
525 525
526 vreg_l20a_2p95: l20 { 526 vreg_l20a_2p95: l20 {
527 regulator-min-microvol 527 regulator-min-microvolt = <2960000>;
528 regulator-max-microvol 528 regulator-max-microvolt = <2960000>;
529 regulator-allow-set-lo 529 regulator-allow-set-load;
530 }; 530 };
531 531
532 vreg_l21a_2p95: l21 { 532 vreg_l21a_2p95: l21 {
533 regulator-min-microvol 533 regulator-min-microvolt = <2960000>;
534 regulator-max-microvol 534 regulator-max-microvolt = <2960000>;
535 regulator-system-load 535 regulator-system-load = <800000>;
536 regulator-allow-set-lo 536 regulator-allow-set-load;
537 }; 537 };
538 538
539 vreg_l22a_2p85: l22 { 539 vreg_l22a_2p85: l22 {
540 regulator-min-microvol 540 regulator-min-microvolt = <2864000>;
541 regulator-max-microvol 541 regulator-max-microvolt = <2864000>;
542 }; 542 };
543 543
544 vreg_l23a_3p3: l23 { 544 vreg_l23a_3p3: l23 {
545 regulator-min-microvol 545 regulator-min-microvolt = <3312000>;
546 regulator-max-microvol 546 regulator-max-microvolt = <3312000>;
547 }; 547 };
548 548
549 vreg_l24a_3p075: l24 { 549 vreg_l24a_3p075: l24 {
550 regulator-min-microvol 550 regulator-min-microvolt = <3088000>;
551 regulator-max-microvol 551 regulator-max-microvolt = <3088000>;
552 }; 552 };
553 553
554 vreg_l25a_3p3: l25 { 554 vreg_l25a_3p3: l25 {
555 regulator-min-microvol 555 regulator-min-microvolt = <3104000>;
556 regulator-max-microvol 556 regulator-max-microvolt = <3312000>;
557 }; 557 };
558 558
559 vreg_l26a_1p2: l26 { 559 vreg_l26a_1p2: l26 {
560 regulator-min-microvol 560 regulator-min-microvolt = <1200000>;
561 regulator-max-microvol 561 regulator-max-microvolt = <1200000>;
562 regulator-allow-set-lo 562 regulator-allow-set-load;
563 }; 563 };
564 564
565 vreg_l28_3p0: l28 { 565 vreg_l28_3p0: l28 {
566 regulator-min-microvol 566 regulator-min-microvolt = <3008000>;
567 regulator-max-microvol 567 regulator-max-microvolt = <3008000>;
568 }; 568 };
569 569
570 vreg_lvs1a_1p8: lvs1 { 570 vreg_lvs1a_1p8: lvs1 {
571 regulator-min-microvol 571 regulator-min-microvolt = <1800000>;
572 regulator-max-microvol 572 regulator-max-microvolt = <1800000>;
573 }; 573 };
574 574
575 vreg_lvs2a_1p8: lvs2 { 575 vreg_lvs2a_1p8: lvs2 {
576 regulator-min-microvol 576 regulator-min-microvolt = <1800000>;
577 regulator-max-microvol 577 regulator-max-microvolt = <1800000>;
578 }; 578 };
579 579
580 }; 580 };
581 581
582 regulators-1 { 582 regulators-1 {
583 compatible = "qcom,rpm-pmi8998 583 compatible = "qcom,rpm-pmi8998-regulators";
584 584
585 vdd_bob-supply = <&vph_pwr>; 585 vdd_bob-supply = <&vph_pwr>;
586 586
587 vreg_bob: bob { 587 vreg_bob: bob {
588 regulator-min-microvol 588 regulator-min-microvolt = <3312000>;
589 regulator-max-microvol 589 regulator-max-microvolt = <3600000>;
590 }; 590 };
591 }; 591 };
592 }; 592 };
593 593
594 &remoteproc_adsp { 594 &remoteproc_adsp {
595 status = "okay"; 595 status = "okay";
596 }; 596 };
597 597
598 &remoteproc_mss { 598 &remoteproc_mss {
599 status = "okay"; 599 status = "okay";
600 }; 600 };
601 601
602 &remoteproc_slpi { 602 &remoteproc_slpi {
603 status = "okay"; 603 status = "okay";
604 }; 604 };
605 605
606 &tlmm { 606 &tlmm {
607 gpio-reserved-ranges = <0 4>; 607 gpio-reserved-ranges = <0 4>;
608 608
609 mdp_vsync_n: mdp-vsync-n-state { 609 mdp_vsync_n: mdp-vsync-n-state {
610 pins = "gpio10"; 610 pins = "gpio10";
611 function = "mdp_vsync_a"; 611 function = "mdp_vsync_a";
612 bias-pull-down; 612 bias-pull-down;
613 drive-strength = <2>; 613 drive-strength = <2>;
614 }; 614 };
615 615
616 gpio_kb_pins_extra: gpio-kb-pins-extra 616 gpio_kb_pins_extra: gpio-kb-pins-extra-state {
617 pins = "gpio21", "gpio32", "gp 617 pins = "gpio21", "gpio32", "gpio33", "gpio114",
618 "gpio128", "gpio129"; 618 "gpio128", "gpio129";
619 function = "gpio"; 619 function = "gpio";
620 drive-strength = <2>; 620 drive-strength = <2>;
621 bias-pull-up; 621 bias-pull-up;
622 }; 622 };
623 623
624 ts_vio_default: ts-vio-def-state { 624 ts_vio_default: ts-vio-def-state {
625 pins = "gpio81"; 625 pins = "gpio81";
626 function = "gpio"; 626 function = "gpio";
627 bias-disable; 627 bias-disable;
628 drive-strength = <2>; 628 drive-strength = <2>;
629 }; 629 };
630 630
631 ts_rst_n: ts-rst-n-state { 631 ts_rst_n: ts-rst-n-state {
632 pins = "gpio89"; 632 pins = "gpio89";
633 function = "gpio"; 633 function = "gpio";
634 bias-pull-up; 634 bias-pull-up;
635 drive-strength = <8>; 635 drive-strength = <8>;
636 }; 636 };
637 637
638 hall_sensor1_default: hall-sensor1-def 638 hall_sensor1_default: hall-sensor1-def-state {
639 pins = "gpio124"; 639 pins = "gpio124";
640 function = "gpio"; 640 function = "gpio";
641 bias-disable; 641 bias-disable;
642 drive-strength = <2>; 642 drive-strength = <2>;
643 }; 643 };
644 644
645 ts_int_n: ts-int-n-state { 645 ts_int_n: ts-int-n-state {
646 pins = "gpio125"; 646 pins = "gpio125";
647 function = "gpio"; 647 function = "gpio";
648 bias-disable; 648 bias-disable;
649 drive-strength = <8>; 649 drive-strength = <8>;
650 }; 650 };
651 }; 651 };
652 652
653 &sdhc2 { 653 &sdhc2 {
654 status = "okay"; 654 status = "okay";
655 cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; 655 cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
656 656
657 vmmc-supply = <&vreg_l21a_2p95>; 657 vmmc-supply = <&vreg_l21a_2p95>;
658 vqmmc-supply = <&vreg_l13a_2p95>; 658 vqmmc-supply = <&vreg_l13a_2p95>;
659 659
660 pinctrl-names = "default", "sleep"; 660 pinctrl-names = "default", "sleep";
661 pinctrl-0 = <&sdc2_on &sdc2_cd>; 661 pinctrl-0 = <&sdc2_on &sdc2_cd>;
662 pinctrl-1 = <&sdc2_off &sdc2_cd>; 662 pinctrl-1 = <&sdc2_off &sdc2_cd>;
663 }; 663 };
664 664
665 &stm { 665 &stm {
666 status = "okay"; 666 status = "okay";
667 }; 667 };
668 668
669 &ufshc { 669 &ufshc {
670 status = "okay"; 670 status = "okay";
671 vcc-supply = <&vreg_l20a_2p95>; 671 vcc-supply = <&vreg_l20a_2p95>;
672 vccq-supply = <&vreg_l26a_1p2>; 672 vccq-supply = <&vreg_l26a_1p2>;
673 vccq2-supply = <&vreg_s4a_1p8>; 673 vccq2-supply = <&vreg_s4a_1p8>;
674 vdd-hba-supply = <&vreg_l26a_1p2>; <<
675 vcc-max-microamp = <750000>; 674 vcc-max-microamp = <750000>;
676 vccq-max-microamp = <560000>; 675 vccq-max-microamp = <560000>;
677 vccq2-max-microamp = <750000>; 676 vccq2-max-microamp = <750000>;
678 }; 677 };
679 678
680 &ufsphy { 679 &ufsphy {
681 status = "okay"; 680 status = "okay";
682 vdda-phy-supply = <&vreg_l1a_0p875>; 681 vdda-phy-supply = <&vreg_l1a_0p875>;
683 vdda-pll-supply = <&vreg_l2a_1p2>; 682 vdda-pll-supply = <&vreg_l2a_1p2>;
>> 683 vddp-ref-clk-supply = <&vreg_l26a_1p2>;
684 }; 684 };
685 685
686 &usb3 { 686 &usb3 {
687 status = "okay"; 687 status = "okay";
688 }; 688 };
689 689
690 &usb3_dwc3 { 690 &usb3_dwc3 {
691 dr_mode = "peripheral"; 691 dr_mode = "peripheral";
692 extcon = <&extcon_usb>; 692 extcon = <&extcon_usb>;
693 }; 693 };
694 694
695 &usb3phy { 695 &usb3phy {
696 status = "okay"; 696 status = "okay";
697 697
698 vdda-phy-supply = <&vreg_l1a_0p875>; 698 vdda-phy-supply = <&vreg_l1a_0p875>;
699 vdda-pll-supply = <&vreg_l2a_1p2>; 699 vdda-pll-supply = <&vreg_l2a_1p2>;
700 }; 700 };
701 701
702 /* GT9286 analog supply */ 702 /* GT9286 analog supply */
703 &vreg_l28_3p0 { 703 &vreg_l28_3p0 {
704 regulator-min-microvolt = <2800000>; 704 regulator-min-microvolt = <2800000>;
705 regulator-max-microvolt = <2800000>; 705 regulator-max-microvolt = <2800000>;
706 }; 706 };
707 707
708 &wifi { 708 &wifi {
709 status = "okay"; 709 status = "okay";
710 710
711 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8> 711 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
712 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 712 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
713 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 713 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
714 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 714 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
715 }; 715 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.