1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * OnePlus 5(T) (cheeseburger / dumpling) comm
4 *
5 * Copyright (c) 2021, Jami Kettunen <jamipkett
6 * Copyright (c) 2016, The Linux Foundation. A
7 */
8
9 /dts-v1/;
10
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h
13 #include "msm8998.dtsi"
14 #include "pm8005.dtsi"
15 #include "pm8998.dtsi"
16 #include "pmi8998.dtsi"
17
18 / {
19 /* Required for bootloader to select c
20 qcom,msm-id = <292 0x20001>; /* 8998 v
21
22 chosen {
23 #address-cells = <2>;
24 #size-cells = <2>;
25 ranges;
26
27 /* Use display framebuffer set
28 framebuffer0: framebuffer@9d40
29 compatible = "simple-f
30 reg = <0x0 0x9d400000
31 width = <1080>;
32 height = <1920>;
33 stride = <(1080 * 4)>;
34 format = "a8r8g8b8";
35 /*
36 * That's a lot of cloc
37 * to unused clk cleanu
38 */
39 clocks = <&mmcc MDSS_A
40 <&mmcc MDSS_A
41 <&mmcc MDSS_V
42 <&mmcc MDSS_M
43 <&mmcc MDSS_B
44 <&mmcc MDSS_B
45 <&mmcc MDSS_P
46 <&mmcc MDSS_E
47 power-domains = <&mmcc
48 };
49 };
50
51 reserved-memory {
52 /* Bootloader display framebuf
53 cont_splash_mem: memory@9d4000
54 reg = <0x0 0x9d400000
55 no-map;
56 };
57
58 /* For getting crash logs usin
59 ramoops@ac000000 {
60 compatible = "ramoops"
61 reg = <0x0 0xac000000
62 console-size = <0x8000
63 pmsg-size = <0x40000>;
64 record-size = <0x8000>
65 ftrace-size = <0x20000
66 };
67
68 /*
69 * The following memory region
70 * but given the same addresse
71 * are where the OnePlus signe
72 */
73 ipa_fws_region: ipa@f6800000 {
74 compatible = "shared-d
75 reg = <0x0 0xf6800000
76 no-map;
77 };
78 zap_shader_region: gpu@f690000
79 compatible = "shared-d
80 reg = <0x0 0xf6900000
81 no-map;
82 };
83 };
84
85 gpio-keys {
86 compatible = "gpio-keys";
87 label = "Volume buttons";
88 autorepeat;
89
90 pinctrl-names = "default";
91 pinctrl-0 = <&vol_keys_default
92
93 button-vol-down {
94 label = "Volume down";
95 gpios = <&pm8998_gpios
96 linux,code = <KEY_VOLU
97 debounce-interval = <1
98 wakeup-source;
99 };
100
101 button-vol-up {
102 label = "Volume up";
103 gpios = <&pm8998_gpios
104 linux,code = <KEY_VOLU
105 debounce-interval = <1
106 wakeup-source;
107 };
108 };
109
110 gpio-hall-sensor {
111 compatible = "gpio-keys";
112 label = "Hall effect sensor";
113
114 pinctrl-names = "default";
115 pinctrl-0 = <&hall_sensor_defa
116
117 event-hall-sensor {
118 label = "Hall Effect S
119 gpios = <&tlmm 124 GPI
120 linux,input-type = <EV
121 linux,code = <SW_LID>;
122 linux,can-disable;
123 wakeup-source;
124 };
125 };
126
127 vph_pwr: vph-pwr-regulator {
128 compatible = "regulator-fixed"
129 regulator-name = "vph_pwr";
130 regulator-always-on;
131 regulator-boot-on;
132 };
133 };
134
135 /*
136 * OnePlus' ADSP firmware requires 30 MiB in t
137 * region by 4 MiB to account for this while r
138 * conflicting memory nodes accordingly.
139 */
140 &adsp_mem {
141 reg = <0x0 0x8b200000 0x0 0x1e00000>;
142 };
143 &mpss_mem {
144 reg = <0x0 0x8d000000 0x0 0x7000000>;
145 };
146 &venus_mem {
147 reg = <0x0 0x94000000 0x0 0x500000>;
148 };
149 &mba_mem {
150 reg = <0x0 0x94500000 0x0 0x200000>;
151 };
152 &slpi_mem {
153 reg = <0x0 0x94700000 0x0 0xf00000>;
154 };
155 &ipa_fw_mem {
156 reg = <0x0 0x95600000 0x0 0x10000>;
157 };
158 &ipa_gsi_mem {
159 reg = <0x0 0x95610000 0x0 0x5000>;
160 };
161 &gpu_mem {
162 reg = <0x0 0x95615000 0x0 0x100000>;
163 };
164 &wlan_msa_mem {
165 reg = <0x0 0x95715000 0x0 0x100000>;
166 };
167
168 &blsp1_i2c5 {
169 status = "okay";
170
171 touchscreen@20 {
172 compatible = "syna,rmi4-i2c";
173 reg = <0x20>;
174 #address-cells = <1>;
175 #size-cells = <0>;
176
177 interrupt-parent = <&tlmm>;
178 interrupts = <125 IRQ_TYPE_EDG
179
180 pinctrl-names = "default";
181 pinctrl-0 = <&ts_int_active &t
182
183 vdd-supply = <&vreg_l28_3p0>;
184 vio-supply = <&vreg_l6a_1p8>;
185
186 syna,reset-delay-ms = <20>;
187 syna,startup-delay-ms = <20>;
188
189 rmi4-f01@1 {
190 reg = <0x01>;
191 syna,nosleep-mode = <1
192 };
193
194 rmi4_f12: rmi4-f12@12 {
195 reg = <0x12>;
196 syna,rezero-wait-ms =
197 syna,sensor-type = <1>
198 touchscreen-x-mm = <68
199 touchscreen-y-mm = <12
200 };
201 };
202 };
203
204 &blsp1_i2c6 {
205 status = "okay";
206
207 nfc@28 {
208 compatible = "nxp,nxp-nci-i2c"
209 reg = <0x28>;
210
211 interrupt-parent = <&tlmm>;
212 interrupts = <92 IRQ_TYPE_LEVE
213
214 enable-gpios = <&tlmm 116 GPIO
215
216 pinctrl-names = "default";
217 pinctrl-0 = <&nfc_int_active &
218 };
219 };
220
221 &blsp1_uart3 {
222 status = "okay";
223
224 bluetooth {
225 compatible = "qcom,wcn3990-bt"
226
227 vddio-supply = <&vreg_s4a_1p8>
228 vddxo-supply = <&vreg_l7a_1p8>
229 vddrf-supply = <&vreg_l17a_1p3
230 vddch0-supply = <&vreg_l25a_3p
231 max-speed = <3200000>;
232 };
233 };
234
235 &blsp1_uart3_on {
236 rx-pins {
237 /delete-property/ bias-disable
238 /*
239 * Configure a pull-up on 46 (
240 * avoid garbage data when the
241 * module is in tri-state (mod
242 * driving the signal yet).
243 */
244 bias-pull-up;
245 };
246
247 cts-pins {
248 /delete-property/ bias-disable
249 /*
250 * Configure a pull-down on 47
251 * of the Bluetooth module.
252 */
253 bias-pull-down;
254 };
255 };
256
257 &blsp2_uart1 {
258 status = "okay";
259 };
260
261 &pm8005_regulators {
262 /* VDD_GFX supply */
263 pm8005_s1: s1 {
264 regulator-min-microvolt = <524
265 regulator-max-microvolt = <110
266 regulator-enable-ramp-delay =
267 /* Hack until we rig up the gp
268 regulator-always-on;
269 };
270 };
271
272 &pm8998_gpios {
273 vol_keys_default: vol-keys-state {
274 pins = "gpio5", "gpio6";
275 function = "normal";
276 bias-pull-up;
277 input-enable;
278 qcom,drive-strength = <PMIC_GP
279 };
280 };
281
282 &qusb2phy {
283 status = "okay";
284
285 vdd-supply = <&vreg_l1a_0p875>;
286 vdda-pll-supply = <&vreg_l12a_1p8>;
287 vdda-phy-dpdm-supply = <&vreg_l24a_3p0
288 };
289
290 &rpm_requests {
291 regulators-0 {
292 compatible = "qcom,rpm-pm8998-
293
294 vdd_s1-supply = <&vph_pwr>;
295 vdd_s2-supply = <&vph_pwr>;
296 vdd_s3-supply = <&vph_pwr>;
297 vdd_s4-supply = <&vph_pwr>;
298 vdd_s5-supply = <&vph_pwr>;
299 vdd_s6-supply = <&vph_pwr>;
300 vdd_s7-supply = <&vph_pwr>;
301 vdd_s8-supply = <&vph_pwr>;
302 vdd_s9-supply = <&vph_pwr>;
303 vdd_s10-supply = <&vph_pwr>;
304 vdd_s11-supply = <&vph_pwr>;
305 vdd_s12-supply = <&vph_pwr>;
306 vdd_s13-supply = <&vph_pwr>;
307 vdd_l1_l27-supply = <&vreg_s7a
308 vdd_l2_l8_l17-supply = <&vreg_
309 vdd_l3_l11-supply = <&vreg_s7a
310 vdd_l4_l5-supply = <&vreg_s7a_
311 vdd_l6-supply = <&vreg_s5a_2p0
312 vdd_l7_l12_l14_l15-supply = <&
313 vdd_l9-supply = <&vreg_bob>;
314 vdd_l10_l23_l25-supply = <&vre
315 vdd_l13_l19_l21-supply = <&vre
316 vdd_l16_l28-supply = <&vreg_bo
317 vdd_l18_l22-supply = <&vreg_bo
318 vdd_l20_l24-supply = <&vreg_bo
319 vdd_l26-supply = <&vreg_s3a_1p
320 vdd_lvs1_lvs2-supply = <&vreg_
321
322 vreg_s3a_1p35: s3 {
323 regulator-min-microvol
324 regulator-max-microvol
325 };
326
327 vreg_s4a_1p8: s4 {
328 regulator-min-microvol
329 regulator-max-microvol
330 regulator-allow-set-lo
331 };
332
333 vreg_s5a_2p04: s5 {
334 regulator-min-microvol
335 regulator-max-microvol
336 };
337
338 vreg_s7a_1p025: s7 {
339 regulator-min-microvol
340 regulator-max-microvol
341 };
342
343 vreg_l1a_0p875: l1 {
344 regulator-min-microvol
345 regulator-max-microvol
346 };
347
348 vreg_l2a_1p2: l2 {
349 regulator-min-microvol
350 regulator-max-microvol
351 };
352
353 vreg_l3a_1p0: l3 {
354 regulator-min-microvol
355 regulator-max-microvol
356 };
357
358 vreg_l5a_0p8: l5 {
359 regulator-min-microvol
360 regulator-max-microvol
361 };
362
363 vreg_l6a_1p8: l6 {
364 regulator-min-microvol
365 regulator-max-microvol
366 };
367
368 vreg_l7a_1p8: l7 {
369 regulator-min-microvol
370 regulator-max-microvol
371 };
372
373 vreg_l8a_1p2: l8 {
374 regulator-min-microvol
375 regulator-max-microvol
376 };
377
378 vreg_l9a_1p8: l9 {
379 regulator-min-microvol
380 regulator-max-microvol
381 };
382
383 vreg_l10a_1p8: l10 {
384 regulator-min-microvol
385 regulator-max-microvol
386 };
387
388 vreg_l11a_1p0: l11 {
389 regulator-min-microvol
390 regulator-max-microvol
391 };
392
393 vreg_l12a_1p8: l12 {
394 regulator-min-microvol
395 regulator-max-microvol
396 };
397
398 vreg_l13a_2p95: l13 {
399 regulator-min-microvol
400 regulator-max-microvol
401 };
402
403 vreg_l14a_1p88: l14 {
404 regulator-min-microvol
405 regulator-max-microvol
406 };
407
408 vreg_l15a_1p8: l15 {
409 regulator-min-microvol
410 regulator-max-microvol
411 };
412
413 vreg_l16a_2p7: l16 {
414 regulator-min-microvol
415 regulator-max-microvol
416 };
417
418 vreg_l17a_1p3: l17 {
419 regulator-min-microvol
420 regulator-max-microvol
421 };
422
423 vreg_l18a_2p7: l18 {
424 regulator-min-microvol
425 regulator-max-microvol
426 };
427
428 vreg_l19a_3p0: l19 {
429 regulator-min-microvol
430 regulator-max-microvol
431 };
432
433 vreg_l20a_2p95: l20 {
434 regulator-min-microvol
435 regulator-max-microvol
436 regulator-allow-set-lo
437 };
438 vreg_l21a_2p95: l21 {
439 regulator-min-microvol
440 regulator-max-microvol
441 regulator-system-load
442 regulator-allow-set-lo
443 };
444
445 vreg_l22a_2p85: l22 {
446 regulator-min-microvol
447 regulator-max-microvol
448 };
449
450 vreg_l23a_3p3: l23 {
451 regulator-min-microvol
452 regulator-max-microvol
453 };
454
455 vreg_l24a_3p075: l24 {
456 regulator-min-microvol
457 regulator-max-microvol
458 };
459
460 vreg_l25a_3p3: l25 {
461 regulator-min-microvol
462 regulator-max-microvol
463 };
464
465 vreg_l26a_1p2: l26 {
466 regulator-min-microvol
467 regulator-max-microvol
468 regulator-allow-set-lo
469 };
470
471 vreg_l28_3p0: l28 {
472 regulator-min-microvol
473 regulator-max-microvol
474 };
475
476 vreg_lvs1a_1p8: lvs1 { };
477 vreg_lvs2a_1p8: lvs2 { };
478 };
479
480 regulators-1 {
481 compatible = "qcom,rpm-pmi8998
482
483 vdd_bob-supply = <&vph_pwr>;
484
485 vreg_bob: bob {
486 regulator-min-microvol
487 regulator-max-microvol
488 };
489 };
490 };
491
492 &tlmm {
493 gpio-reserved-ranges = <0 4>, <81 4>;
494
495 hall_sensor_default: hall-sensor-defau
496 pins = "gpio124";
497 function = "gpio";
498 drive-strength = <2>;
499 bias-disable;
500 };
501
502 ts_int_active: ts-int-active-state {
503 pins = "gpio125";
504 function = "gpio";
505 drive-strength = <8>;
506 bias-pull-up;
507 };
508
509 ts_reset_active: ts-reset-active-state
510 pins = "gpio89";
511 function = "gpio";
512 drive-strength = <8>;
513 bias-pull-up;
514 };
515
516 nfc_int_active: nfc-int-active-state {
517 pins = "gpio92";
518 function = "gpio";
519 drive-strength = <6>;
520 bias-pull-up;
521 };
522
523 nfc_enable_active: nfc-enable-active-s
524 pins = "gpio12", "gpio116";
525 function = "gpio";
526 drive-strength = <6>;
527 bias-pull-up;
528 };
529 };
530
531 &ufshc {
532 status = "okay";
533
534 vcc-supply = <&vreg_l20a_2p95>;
535 vccq-supply = <&vreg_l26a_1p2>;
536 vccq2-supply = <&vreg_s4a_1p8>;
537 vdd-hba-supply = <&vreg_l26a_1p2>;
538 vcc-max-microamp = <750000>;
539 vccq-max-microamp = <560000>;
540 vccq2-max-microamp = <750000>;
541 };
542
543 &ufsphy {
544 status = "okay";
545
546 vdda-phy-supply = <&vreg_l1a_0p875>;
547 vdda-pll-supply = <&vreg_l2a_1p2>;
548 };
549
550 &usb3 {
551 status = "okay";
552
553 /* Disable USB3 clock requirement as t
554 qcom,select-utmi-as-pipe-clk;
555 };
556
557 &usb3_dwc3 {
558 /* Drop the unused USB 3 PHY */
559 phys = <&qusb2phy>;
560 phy-names = "usb2-phy";
561
562 /* Fastest mode for USB 2 */
563 maximum-speed = "high-speed";
564
565 /* Force to peripheral until we can sw
566 dr_mode = "peripheral";
567 };
568
569 &wifi {
570 /* Leave disabled until MSS is functio
571 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>
572 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
573 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
574 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
575 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.