1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * OnePlus 5(T) (cheeseburger / dumpling) comm 3 * OnePlus 5(T) (cheeseburger / dumpling) common device tree source based on msm8998-mtp.dtsi
4 * 4 *
5 * Copyright (c) 2021, Jami Kettunen <jamipkett 5 * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com>
6 * Copyright (c) 2016, The Linux Foundation. A 6 * Copyright (c) 2016, The Linux Foundation. All rights reserved.
7 */ 7 */
8 8
9 /dts-v1/; 9 /dts-v1/;
10 10
11 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
13 #include "msm8998.dtsi" 13 #include "msm8998.dtsi"
14 #include "pm8005.dtsi" 14 #include "pm8005.dtsi"
15 #include "pm8998.dtsi" 15 #include "pm8998.dtsi"
16 #include "pmi8998.dtsi" 16 #include "pmi8998.dtsi"
17 17
18 / { 18 / {
19 /* Required for bootloader to select c 19 /* Required for bootloader to select correct board */
20 qcom,msm-id = <292 0x20001>; /* 8998 v 20 qcom,msm-id = <292 0x20001>; /* 8998 v2.1 */
21 21
22 chosen { 22 chosen {
23 #address-cells = <2>; 23 #address-cells = <2>;
24 #size-cells = <2>; 24 #size-cells = <2>;
25 ranges; 25 ranges;
26 26
27 /* Use display framebuffer set 27 /* Use display framebuffer setup by the UEFI XBL bootloader for simplefb */
28 framebuffer0: framebuffer@9d40 28 framebuffer0: framebuffer@9d400000 {
29 compatible = "simple-f 29 compatible = "simple-framebuffer";
30 reg = <0x0 0x9d400000 30 reg = <0x0 0x9d400000 0x0 0x2400000>;
31 width = <1080>; 31 width = <1080>;
32 height = <1920>; 32 height = <1920>;
33 stride = <(1080 * 4)>; 33 stride = <(1080 * 4)>;
34 format = "a8r8g8b8"; 34 format = "a8r8g8b8";
35 /* 35 /*
36 * That's a lot of cloc 36 * That's a lot of clocks, but it's necessary due
37 * to unused clk cleanu 37 * to unused clk cleanup & no panel driver yet..
38 */ 38 */
39 clocks = <&mmcc MDSS_A 39 clocks = <&mmcc MDSS_AHB_CLK>,
40 <&mmcc MDSS_A 40 <&mmcc MDSS_AXI_CLK>,
41 <&mmcc MDSS_V 41 <&mmcc MDSS_VSYNC_CLK>,
42 <&mmcc MDSS_M 42 <&mmcc MDSS_MDP_CLK>,
43 <&mmcc MDSS_B 43 <&mmcc MDSS_BYTE0_CLK>,
44 <&mmcc MDSS_B 44 <&mmcc MDSS_BYTE0_INTF_CLK>,
45 <&mmcc MDSS_P 45 <&mmcc MDSS_PCLK0_CLK>,
46 <&mmcc MDSS_E 46 <&mmcc MDSS_ESC0_CLK>;
47 power-domains = <&mmcc 47 power-domains = <&mmcc MDSS_GDSC>;
48 }; 48 };
49 }; 49 };
50 50
51 reserved-memory { 51 reserved-memory {
52 /* Bootloader display framebuf 52 /* Bootloader display framebuffer region */
53 cont_splash_mem: memory@9d4000 53 cont_splash_mem: memory@9d400000 {
54 reg = <0x0 0x9d400000 54 reg = <0x0 0x9d400000 0x0 0x2400000>;
55 no-map; 55 no-map;
56 }; 56 };
57 57
58 /* For getting crash logs usin 58 /* For getting crash logs using Android downstream kernels */
59 ramoops@ac000000 { 59 ramoops@ac000000 {
60 compatible = "ramoops" 60 compatible = "ramoops";
61 reg = <0x0 0xac000000 61 reg = <0x0 0xac000000 0x0 0x200000>;
62 console-size = <0x8000 62 console-size = <0x80000>;
63 pmsg-size = <0x40000>; 63 pmsg-size = <0x40000>;
64 record-size = <0x8000> 64 record-size = <0x8000>;
65 ftrace-size = <0x20000 65 ftrace-size = <0x20000>;
66 }; 66 };
67 67
68 /* 68 /*
69 * The following memory region 69 * The following memory regions on downstream are "dynamically allocated"
70 * but given the same addresse 70 * but given the same addresses every time. Hard code them as these addresses
71 * are where the OnePlus signe 71 * are where the OnePlus signed firmware expects them to be.
72 */ 72 */
73 ipa_fws_region: ipa@f6800000 { 73 ipa_fws_region: ipa@f6800000 {
74 compatible = "shared-d 74 compatible = "shared-dma-pool";
75 reg = <0x0 0xf6800000 75 reg = <0x0 0xf6800000 0x0 0x5000>;
76 no-map; 76 no-map;
77 }; 77 };
78 zap_shader_region: gpu@f690000 78 zap_shader_region: gpu@f6900000 {
79 compatible = "shared-d 79 compatible = "shared-dma-pool";
80 reg = <0x0 0xf6900000 80 reg = <0x0 0xf6900000 0x0 0x2000>;
81 no-map; 81 no-map;
82 }; 82 };
83 }; 83 };
84 84
85 gpio-keys { 85 gpio-keys {
86 compatible = "gpio-keys"; 86 compatible = "gpio-keys";
87 label = "Volume buttons"; 87 label = "Volume buttons";
88 autorepeat; 88 autorepeat;
89 89
90 pinctrl-names = "default"; 90 pinctrl-names = "default";
91 pinctrl-0 = <&vol_keys_default 91 pinctrl-0 = <&vol_keys_default>;
92 92
93 button-vol-down { 93 button-vol-down {
94 label = "Volume down"; 94 label = "Volume down";
95 gpios = <&pm8998_gpios 95 gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
96 linux,code = <KEY_VOLU 96 linux,code = <KEY_VOLUMEDOWN>;
97 debounce-interval = <1 97 debounce-interval = <15>;
98 wakeup-source; 98 wakeup-source;
99 }; 99 };
100 100
101 button-vol-up { 101 button-vol-up {
102 label = "Volume up"; 102 label = "Volume up";
103 gpios = <&pm8998_gpios 103 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
104 linux,code = <KEY_VOLU 104 linux,code = <KEY_VOLUMEUP>;
105 debounce-interval = <1 105 debounce-interval = <15>;
106 wakeup-source; 106 wakeup-source;
107 }; 107 };
108 }; 108 };
109 109
110 gpio-hall-sensor { 110 gpio-hall-sensor {
111 compatible = "gpio-keys"; 111 compatible = "gpio-keys";
112 label = "Hall effect sensor"; 112 label = "Hall effect sensor";
113 113
114 pinctrl-names = "default"; 114 pinctrl-names = "default";
115 pinctrl-0 = <&hall_sensor_defa 115 pinctrl-0 = <&hall_sensor_default>;
116 116
117 event-hall-sensor { 117 event-hall-sensor {
118 label = "Hall Effect S 118 label = "Hall Effect Sensor";
119 gpios = <&tlmm 124 GPI 119 gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
120 linux,input-type = <EV 120 linux,input-type = <EV_SW>;
121 linux,code = <SW_LID>; 121 linux,code = <SW_LID>;
122 linux,can-disable; 122 linux,can-disable;
123 wakeup-source; 123 wakeup-source;
124 }; 124 };
125 }; 125 };
126 126
127 vph_pwr: vph-pwr-regulator { 127 vph_pwr: vph-pwr-regulator {
128 compatible = "regulator-fixed" 128 compatible = "regulator-fixed";
129 regulator-name = "vph_pwr"; 129 regulator-name = "vph_pwr";
130 regulator-always-on; 130 regulator-always-on;
131 regulator-boot-on; 131 regulator-boot-on;
132 }; 132 };
133 }; 133 };
134 134
135 /* 135 /*
136 * OnePlus' ADSP firmware requires 30 MiB in t 136 * OnePlus' ADSP firmware requires 30 MiB in total, so increase the adsp_mem
137 * region by 4 MiB to account for this while r 137 * region by 4 MiB to account for this while relocating the other now
138 * conflicting memory nodes accordingly. 138 * conflicting memory nodes accordingly.
139 */ 139 */
140 &adsp_mem { 140 &adsp_mem {
141 reg = <0x0 0x8b200000 0x0 0x1e00000>; 141 reg = <0x0 0x8b200000 0x0 0x1e00000>;
142 }; 142 };
143 &mpss_mem { 143 &mpss_mem {
144 reg = <0x0 0x8d000000 0x0 0x7000000>; 144 reg = <0x0 0x8d000000 0x0 0x7000000>;
145 }; 145 };
146 &venus_mem { 146 &venus_mem {
147 reg = <0x0 0x94000000 0x0 0x500000>; 147 reg = <0x0 0x94000000 0x0 0x500000>;
148 }; 148 };
149 &mba_mem { 149 &mba_mem {
150 reg = <0x0 0x94500000 0x0 0x200000>; 150 reg = <0x0 0x94500000 0x0 0x200000>;
151 }; 151 };
152 &slpi_mem { 152 &slpi_mem {
153 reg = <0x0 0x94700000 0x0 0xf00000>; 153 reg = <0x0 0x94700000 0x0 0xf00000>;
154 }; 154 };
155 &ipa_fw_mem { 155 &ipa_fw_mem {
156 reg = <0x0 0x95600000 0x0 0x10000>; 156 reg = <0x0 0x95600000 0x0 0x10000>;
157 }; 157 };
158 &ipa_gsi_mem { 158 &ipa_gsi_mem {
159 reg = <0x0 0x95610000 0x0 0x5000>; 159 reg = <0x0 0x95610000 0x0 0x5000>;
160 }; 160 };
161 &gpu_mem { 161 &gpu_mem {
162 reg = <0x0 0x95615000 0x0 0x100000>; 162 reg = <0x0 0x95615000 0x0 0x100000>;
163 }; 163 };
164 &wlan_msa_mem { 164 &wlan_msa_mem {
165 reg = <0x0 0x95715000 0x0 0x100000>; 165 reg = <0x0 0x95715000 0x0 0x100000>;
166 }; 166 };
167 167
168 &blsp1_i2c5 { 168 &blsp1_i2c5 {
169 status = "okay"; 169 status = "okay";
170 170
171 touchscreen@20 { 171 touchscreen@20 {
172 compatible = "syna,rmi4-i2c"; 172 compatible = "syna,rmi4-i2c";
173 reg = <0x20>; 173 reg = <0x20>;
174 #address-cells = <1>; 174 #address-cells = <1>;
175 #size-cells = <0>; 175 #size-cells = <0>;
176 176
177 interrupt-parent = <&tlmm>; 177 interrupt-parent = <&tlmm>;
178 interrupts = <125 IRQ_TYPE_EDG 178 interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
179 179
180 pinctrl-names = "default"; 180 pinctrl-names = "default";
181 pinctrl-0 = <&ts_int_active &t 181 pinctrl-0 = <&ts_int_active &ts_reset_active>;
182 182
183 vdd-supply = <&vreg_l28_3p0>; 183 vdd-supply = <&vreg_l28_3p0>;
184 vio-supply = <&vreg_l6a_1p8>; 184 vio-supply = <&vreg_l6a_1p8>;
185 185
186 syna,reset-delay-ms = <20>; 186 syna,reset-delay-ms = <20>;
187 syna,startup-delay-ms = <20>; 187 syna,startup-delay-ms = <20>;
188 188
189 rmi4-f01@1 { 189 rmi4-f01@1 {
190 reg = <0x01>; 190 reg = <0x01>;
191 syna,nosleep-mode = <1 191 syna,nosleep-mode = <1>;
192 }; 192 };
193 193
194 rmi4_f12: rmi4-f12@12 { 194 rmi4_f12: rmi4-f12@12 {
195 reg = <0x12>; 195 reg = <0x12>;
196 syna,rezero-wait-ms = 196 syna,rezero-wait-ms = <20>;
197 syna,sensor-type = <1> 197 syna,sensor-type = <1>;
198 touchscreen-x-mm = <68 198 touchscreen-x-mm = <68>;
199 touchscreen-y-mm = <12 199 touchscreen-y-mm = <122>;
200 }; 200 };
201 }; 201 };
202 }; 202 };
203 203
204 &blsp1_i2c6 { 204 &blsp1_i2c6 {
205 status = "okay"; 205 status = "okay";
206 206
207 nfc@28 { 207 nfc@28 {
208 compatible = "nxp,nxp-nci-i2c" 208 compatible = "nxp,nxp-nci-i2c";
209 reg = <0x28>; 209 reg = <0x28>;
210 210
211 interrupt-parent = <&tlmm>; 211 interrupt-parent = <&tlmm>;
212 interrupts = <92 IRQ_TYPE_LEVE 212 interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
213 213
214 enable-gpios = <&tlmm 116 GPIO 214 enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
215 215
216 pinctrl-names = "default"; 216 pinctrl-names = "default";
217 pinctrl-0 = <&nfc_int_active & 217 pinctrl-0 = <&nfc_int_active &nfc_enable_active>;
218 }; 218 };
219 }; 219 };
220 220
221 &blsp1_uart3 { 221 &blsp1_uart3 {
222 status = "okay"; 222 status = "okay";
223 223
224 bluetooth { 224 bluetooth {
225 compatible = "qcom,wcn3990-bt" 225 compatible = "qcom,wcn3990-bt";
226 226
227 vddio-supply = <&vreg_s4a_1p8> 227 vddio-supply = <&vreg_s4a_1p8>;
228 vddxo-supply = <&vreg_l7a_1p8> 228 vddxo-supply = <&vreg_l7a_1p8>;
229 vddrf-supply = <&vreg_l17a_1p3 229 vddrf-supply = <&vreg_l17a_1p3>;
230 vddch0-supply = <&vreg_l25a_3p 230 vddch0-supply = <&vreg_l25a_3p3>;
231 max-speed = <3200000>; 231 max-speed = <3200000>;
232 }; 232 };
233 }; 233 };
234 234
235 &blsp1_uart3_on { 235 &blsp1_uart3_on {
236 rx-pins { 236 rx-pins {
237 /delete-property/ bias-disable 237 /delete-property/ bias-disable;
238 /* 238 /*
239 * Configure a pull-up on 46 ( 239 * Configure a pull-up on 46 (RX). This is needed to
240 * avoid garbage data when the 240 * avoid garbage data when the TX pin of the Bluetooth
241 * module is in tri-state (mod 241 * module is in tri-state (module powered off or not
242 * driving the signal yet). 242 * driving the signal yet).
243 */ 243 */
244 bias-pull-up; 244 bias-pull-up;
245 }; 245 };
246 246
247 cts-pins { 247 cts-pins {
248 /delete-property/ bias-disable 248 /delete-property/ bias-disable;
249 /* 249 /*
250 * Configure a pull-down on 47 250 * Configure a pull-down on 47 (CTS) to match the pull
251 * of the Bluetooth module. 251 * of the Bluetooth module.
252 */ 252 */
253 bias-pull-down; 253 bias-pull-down;
254 }; 254 };
255 }; 255 };
256 256
257 &blsp2_uart1 { 257 &blsp2_uart1 {
258 status = "okay"; 258 status = "okay";
259 }; 259 };
260 260
261 &pm8005_regulators { 261 &pm8005_regulators {
262 /* VDD_GFX supply */ 262 /* VDD_GFX supply */
263 pm8005_s1: s1 { 263 pm8005_s1: s1 {
264 regulator-min-microvolt = <524 264 regulator-min-microvolt = <524000>;
265 regulator-max-microvolt = <110 265 regulator-max-microvolt = <1100000>;
266 regulator-enable-ramp-delay = 266 regulator-enable-ramp-delay = <500>;
267 /* Hack until we rig up the gp 267 /* Hack until we rig up the gpu consumer */
268 regulator-always-on; 268 regulator-always-on;
269 }; 269 };
270 }; 270 };
271 271
272 &pm8998_gpios { 272 &pm8998_gpios {
273 vol_keys_default: vol-keys-state { 273 vol_keys_default: vol-keys-state {
274 pins = "gpio5", "gpio6"; 274 pins = "gpio5", "gpio6";
275 function = "normal"; 275 function = "normal";
276 bias-pull-up; 276 bias-pull-up;
277 input-enable; 277 input-enable;
278 qcom,drive-strength = <PMIC_GP 278 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
279 }; 279 };
280 }; 280 };
281 281
>> 282 &pmi8998_rradc {
>> 283 status = "okay";
>> 284 };
>> 285
282 &qusb2phy { 286 &qusb2phy {
283 status = "okay"; 287 status = "okay";
284 288
285 vdd-supply = <&vreg_l1a_0p875>; 289 vdd-supply = <&vreg_l1a_0p875>;
286 vdda-pll-supply = <&vreg_l12a_1p8>; 290 vdda-pll-supply = <&vreg_l12a_1p8>;
287 vdda-phy-dpdm-supply = <&vreg_l24a_3p0 291 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
288 }; 292 };
289 293
290 &rpm_requests { 294 &rpm_requests {
291 regulators-0 { 295 regulators-0 {
292 compatible = "qcom,rpm-pm8998- 296 compatible = "qcom,rpm-pm8998-regulators";
293 297
294 vdd_s1-supply = <&vph_pwr>; 298 vdd_s1-supply = <&vph_pwr>;
295 vdd_s2-supply = <&vph_pwr>; 299 vdd_s2-supply = <&vph_pwr>;
296 vdd_s3-supply = <&vph_pwr>; 300 vdd_s3-supply = <&vph_pwr>;
297 vdd_s4-supply = <&vph_pwr>; 301 vdd_s4-supply = <&vph_pwr>;
298 vdd_s5-supply = <&vph_pwr>; 302 vdd_s5-supply = <&vph_pwr>;
299 vdd_s6-supply = <&vph_pwr>; 303 vdd_s6-supply = <&vph_pwr>;
300 vdd_s7-supply = <&vph_pwr>; 304 vdd_s7-supply = <&vph_pwr>;
301 vdd_s8-supply = <&vph_pwr>; 305 vdd_s8-supply = <&vph_pwr>;
302 vdd_s9-supply = <&vph_pwr>; 306 vdd_s9-supply = <&vph_pwr>;
303 vdd_s10-supply = <&vph_pwr>; 307 vdd_s10-supply = <&vph_pwr>;
304 vdd_s11-supply = <&vph_pwr>; 308 vdd_s11-supply = <&vph_pwr>;
305 vdd_s12-supply = <&vph_pwr>; 309 vdd_s12-supply = <&vph_pwr>;
306 vdd_s13-supply = <&vph_pwr>; 310 vdd_s13-supply = <&vph_pwr>;
307 vdd_l1_l27-supply = <&vreg_s7a 311 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
308 vdd_l2_l8_l17-supply = <&vreg_ 312 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
309 vdd_l3_l11-supply = <&vreg_s7a 313 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
310 vdd_l4_l5-supply = <&vreg_s7a_ 314 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
311 vdd_l6-supply = <&vreg_s5a_2p0 315 vdd_l6-supply = <&vreg_s5a_2p04>;
312 vdd_l7_l12_l14_l15-supply = <& 316 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
313 vdd_l9-supply = <&vreg_bob>; 317 vdd_l9-supply = <&vreg_bob>;
314 vdd_l10_l23_l25-supply = <&vre 318 vdd_l10_l23_l25-supply = <&vreg_bob>;
315 vdd_l13_l19_l21-supply = <&vre 319 vdd_l13_l19_l21-supply = <&vreg_bob>;
316 vdd_l16_l28-supply = <&vreg_bo 320 vdd_l16_l28-supply = <&vreg_bob>;
317 vdd_l18_l22-supply = <&vreg_bo 321 vdd_l18_l22-supply = <&vreg_bob>;
318 vdd_l20_l24-supply = <&vreg_bo 322 vdd_l20_l24-supply = <&vreg_bob>;
319 vdd_l26-supply = <&vreg_s3a_1p 323 vdd_l26-supply = <&vreg_s3a_1p35>;
320 vdd_lvs1_lvs2-supply = <&vreg_ 324 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
321 325
322 vreg_s3a_1p35: s3 { 326 vreg_s3a_1p35: s3 {
323 regulator-min-microvol 327 regulator-min-microvolt = <1352000>;
324 regulator-max-microvol 328 regulator-max-microvolt = <1352000>;
325 }; 329 };
326 330
327 vreg_s4a_1p8: s4 { 331 vreg_s4a_1p8: s4 {
328 regulator-min-microvol 332 regulator-min-microvolt = <1800000>;
329 regulator-max-microvol 333 regulator-max-microvolt = <1800000>;
330 regulator-allow-set-lo 334 regulator-allow-set-load;
331 }; 335 };
332 336
333 vreg_s5a_2p04: s5 { 337 vreg_s5a_2p04: s5 {
334 regulator-min-microvol 338 regulator-min-microvolt = <1904000>;
335 regulator-max-microvol 339 regulator-max-microvolt = <2040000>;
336 }; 340 };
337 341
338 vreg_s7a_1p025: s7 { 342 vreg_s7a_1p025: s7 {
339 regulator-min-microvol 343 regulator-min-microvolt = <900000>;
340 regulator-max-microvol 344 regulator-max-microvolt = <1028000>;
341 }; 345 };
342 346
343 vreg_l1a_0p875: l1 { 347 vreg_l1a_0p875: l1 {
344 regulator-min-microvol 348 regulator-min-microvolt = <880000>;
345 regulator-max-microvol 349 regulator-max-microvolt = <880000>;
346 }; 350 };
347 351
348 vreg_l2a_1p2: l2 { 352 vreg_l2a_1p2: l2 {
349 regulator-min-microvol 353 regulator-min-microvolt = <1200000>;
350 regulator-max-microvol 354 regulator-max-microvolt = <1200000>;
351 }; 355 };
352 356
353 vreg_l3a_1p0: l3 { 357 vreg_l3a_1p0: l3 {
354 regulator-min-microvol 358 regulator-min-microvolt = <1000000>;
355 regulator-max-microvol 359 regulator-max-microvolt = <1000000>;
356 }; 360 };
357 361
358 vreg_l5a_0p8: l5 { 362 vreg_l5a_0p8: l5 {
359 regulator-min-microvol 363 regulator-min-microvolt = <800000>;
360 regulator-max-microvol 364 regulator-max-microvolt = <800000>;
361 }; 365 };
362 366
363 vreg_l6a_1p8: l6 { 367 vreg_l6a_1p8: l6 {
364 regulator-min-microvol 368 regulator-min-microvolt = <1808000>;
365 regulator-max-microvol 369 regulator-max-microvolt = <1808000>;
366 }; 370 };
367 371
368 vreg_l7a_1p8: l7 { 372 vreg_l7a_1p8: l7 {
369 regulator-min-microvol 373 regulator-min-microvolt = <1800000>;
370 regulator-max-microvol 374 regulator-max-microvolt = <1800000>;
371 }; 375 };
372 376
373 vreg_l8a_1p2: l8 { 377 vreg_l8a_1p2: l8 {
374 regulator-min-microvol 378 regulator-min-microvolt = <1200000>;
375 regulator-max-microvol 379 regulator-max-microvolt = <1200000>;
376 }; 380 };
377 381
378 vreg_l9a_1p8: l9 { 382 vreg_l9a_1p8: l9 {
379 regulator-min-microvol 383 regulator-min-microvolt = <1808000>;
380 regulator-max-microvol 384 regulator-max-microvolt = <2960000>;
381 }; 385 };
382 386
383 vreg_l10a_1p8: l10 { 387 vreg_l10a_1p8: l10 {
384 regulator-min-microvol 388 regulator-min-microvolt = <1808000>;
385 regulator-max-microvol 389 regulator-max-microvolt = <2960000>;
386 }; 390 };
387 391
388 vreg_l11a_1p0: l11 { 392 vreg_l11a_1p0: l11 {
389 regulator-min-microvol 393 regulator-min-microvolt = <1000000>;
390 regulator-max-microvol 394 regulator-max-microvolt = <1000000>;
391 }; 395 };
392 396
393 vreg_l12a_1p8: l12 { 397 vreg_l12a_1p8: l12 {
394 regulator-min-microvol 398 regulator-min-microvolt = <1800000>;
395 regulator-max-microvol 399 regulator-max-microvolt = <1800000>;
396 }; 400 };
397 401
398 vreg_l13a_2p95: l13 { 402 vreg_l13a_2p95: l13 {
399 regulator-min-microvol 403 regulator-min-microvolt = <1808000>;
400 regulator-max-microvol 404 regulator-max-microvolt = <2960000>;
401 }; 405 };
402 406
403 vreg_l14a_1p88: l14 { 407 vreg_l14a_1p88: l14 {
404 regulator-min-microvol 408 regulator-min-microvolt = <1880000>;
405 regulator-max-microvol 409 regulator-max-microvolt = <1880000>;
406 }; 410 };
407 411
408 vreg_l15a_1p8: l15 { 412 vreg_l15a_1p8: l15 {
409 regulator-min-microvol 413 regulator-min-microvolt = <1800000>;
410 regulator-max-microvol 414 regulator-max-microvolt = <1800000>;
411 }; 415 };
412 416
413 vreg_l16a_2p7: l16 { 417 vreg_l16a_2p7: l16 {
414 regulator-min-microvol 418 regulator-min-microvolt = <2704000>;
415 regulator-max-microvol 419 regulator-max-microvolt = <2704000>;
416 }; 420 };
417 421
418 vreg_l17a_1p3: l17 { 422 vreg_l17a_1p3: l17 {
419 regulator-min-microvol 423 regulator-min-microvolt = <1304000>;
420 regulator-max-microvol 424 regulator-max-microvolt = <1304000>;
421 }; 425 };
422 426
423 vreg_l18a_2p7: l18 { 427 vreg_l18a_2p7: l18 {
424 regulator-min-microvol 428 regulator-min-microvolt = <2704000>;
425 regulator-max-microvol 429 regulator-max-microvolt = <2704000>;
426 }; 430 };
427 431
428 vreg_l19a_3p0: l19 { 432 vreg_l19a_3p0: l19 {
429 regulator-min-microvol 433 regulator-min-microvolt = <3008000>;
430 regulator-max-microvol 434 regulator-max-microvolt = <3008000>;
431 }; 435 };
432 436
433 vreg_l20a_2p95: l20 { 437 vreg_l20a_2p95: l20 {
434 regulator-min-microvol 438 regulator-min-microvolt = <2960000>;
435 regulator-max-microvol 439 regulator-max-microvolt = <2960000>;
436 regulator-allow-set-lo 440 regulator-allow-set-load;
437 }; 441 };
438 vreg_l21a_2p95: l21 { 442 vreg_l21a_2p95: l21 {
439 regulator-min-microvol 443 regulator-min-microvolt = <2960000>;
440 regulator-max-microvol 444 regulator-max-microvolt = <2960000>;
441 regulator-system-load 445 regulator-system-load = <800000>;
442 regulator-allow-set-lo 446 regulator-allow-set-load;
443 }; 447 };
444 448
445 vreg_l22a_2p85: l22 { 449 vreg_l22a_2p85: l22 {
446 regulator-min-microvol 450 regulator-min-microvolt = <2864000>;
447 regulator-max-microvol 451 regulator-max-microvolt = <2864000>;
448 }; 452 };
449 453
450 vreg_l23a_3p3: l23 { 454 vreg_l23a_3p3: l23 {
451 regulator-min-microvol 455 regulator-min-microvolt = <3312000>;
452 regulator-max-microvol 456 regulator-max-microvolt = <3312000>;
453 }; 457 };
454 458
455 vreg_l24a_3p075: l24 { 459 vreg_l24a_3p075: l24 {
456 regulator-min-microvol 460 regulator-min-microvolt = <3088000>;
457 regulator-max-microvol 461 regulator-max-microvolt = <3088000>;
458 }; 462 };
459 463
460 vreg_l25a_3p3: l25 { 464 vreg_l25a_3p3: l25 {
461 regulator-min-microvol 465 regulator-min-microvolt = <3104000>;
462 regulator-max-microvol 466 regulator-max-microvolt = <3312000>;
463 }; 467 };
464 468
465 vreg_l26a_1p2: l26 { 469 vreg_l26a_1p2: l26 {
466 regulator-min-microvol 470 regulator-min-microvolt = <1200000>;
467 regulator-max-microvol 471 regulator-max-microvolt = <1200000>;
468 regulator-allow-set-lo 472 regulator-allow-set-load;
469 }; 473 };
470 474
471 vreg_l28_3p0: l28 { 475 vreg_l28_3p0: l28 {
472 regulator-min-microvol 476 regulator-min-microvolt = <3008000>;
473 regulator-max-microvol 477 regulator-max-microvolt = <3008000>;
474 }; 478 };
475 479
476 vreg_lvs1a_1p8: lvs1 { }; 480 vreg_lvs1a_1p8: lvs1 { };
477 vreg_lvs2a_1p8: lvs2 { }; 481 vreg_lvs2a_1p8: lvs2 { };
478 }; 482 };
479 483
480 regulators-1 { 484 regulators-1 {
481 compatible = "qcom,rpm-pmi8998 485 compatible = "qcom,rpm-pmi8998-regulators";
482 486
483 vdd_bob-supply = <&vph_pwr>; 487 vdd_bob-supply = <&vph_pwr>;
484 488
485 vreg_bob: bob { 489 vreg_bob: bob {
486 regulator-min-microvol 490 regulator-min-microvolt = <3312000>;
487 regulator-max-microvol 491 regulator-max-microvolt = <3600000>;
488 }; 492 };
489 }; 493 };
490 }; 494 };
491 495
492 &tlmm { 496 &tlmm {
493 gpio-reserved-ranges = <0 4>, <81 4>; 497 gpio-reserved-ranges = <0 4>, <81 4>;
494 498
495 hall_sensor_default: hall-sensor-defau 499 hall_sensor_default: hall-sensor-default-state {
496 pins = "gpio124"; 500 pins = "gpio124";
497 function = "gpio"; 501 function = "gpio";
498 drive-strength = <2>; 502 drive-strength = <2>;
499 bias-disable; 503 bias-disable;
>> 504 input-enable;
500 }; 505 };
501 506
502 ts_int_active: ts-int-active-state { 507 ts_int_active: ts-int-active-state {
503 pins = "gpio125"; 508 pins = "gpio125";
504 function = "gpio"; 509 function = "gpio";
505 drive-strength = <8>; 510 drive-strength = <8>;
506 bias-pull-up; 511 bias-pull-up;
507 }; 512 };
508 513
509 ts_reset_active: ts-reset-active-state 514 ts_reset_active: ts-reset-active-state {
510 pins = "gpio89"; 515 pins = "gpio89";
511 function = "gpio"; 516 function = "gpio";
512 drive-strength = <8>; 517 drive-strength = <8>;
513 bias-pull-up; 518 bias-pull-up;
514 }; 519 };
515 520
516 nfc_int_active: nfc-int-active-state { 521 nfc_int_active: nfc-int-active-state {
517 pins = "gpio92"; 522 pins = "gpio92";
518 function = "gpio"; 523 function = "gpio";
519 drive-strength = <6>; 524 drive-strength = <6>;
520 bias-pull-up; 525 bias-pull-up;
521 }; 526 };
522 527
523 nfc_enable_active: nfc-enable-active-s 528 nfc_enable_active: nfc-enable-active-state {
524 pins = "gpio12", "gpio116"; 529 pins = "gpio12", "gpio116";
525 function = "gpio"; 530 function = "gpio";
526 drive-strength = <6>; 531 drive-strength = <6>;
527 bias-pull-up; 532 bias-pull-up;
528 }; 533 };
529 }; 534 };
530 535
531 &ufshc { 536 &ufshc {
532 status = "okay"; 537 status = "okay";
533 538
534 vcc-supply = <&vreg_l20a_2p95>; 539 vcc-supply = <&vreg_l20a_2p95>;
535 vccq-supply = <&vreg_l26a_1p2>; 540 vccq-supply = <&vreg_l26a_1p2>;
536 vccq2-supply = <&vreg_s4a_1p8>; 541 vccq2-supply = <&vreg_s4a_1p8>;
537 vdd-hba-supply = <&vreg_l26a_1p2>; <<
538 vcc-max-microamp = <750000>; 542 vcc-max-microamp = <750000>;
539 vccq-max-microamp = <560000>; 543 vccq-max-microamp = <560000>;
540 vccq2-max-microamp = <750000>; 544 vccq2-max-microamp = <750000>;
541 }; 545 };
542 546
543 &ufsphy { 547 &ufsphy {
544 status = "okay"; 548 status = "okay";
545 549
546 vdda-phy-supply = <&vreg_l1a_0p875>; 550 vdda-phy-supply = <&vreg_l1a_0p875>;
547 vdda-pll-supply = <&vreg_l2a_1p2>; 551 vdda-pll-supply = <&vreg_l2a_1p2>;
>> 552 vddp-ref-clk-supply = <&vreg_l26a_1p2>;
548 }; 553 };
549 554
550 &usb3 { 555 &usb3 {
551 status = "okay"; 556 status = "okay";
552 557
553 /* Disable USB3 clock requirement as t 558 /* Disable USB3 clock requirement as the device only supports USB2 */
554 qcom,select-utmi-as-pipe-clk; 559 qcom,select-utmi-as-pipe-clk;
555 }; 560 };
556 561
557 &usb3_dwc3 { 562 &usb3_dwc3 {
558 /* Drop the unused USB 3 PHY */ 563 /* Drop the unused USB 3 PHY */
559 phys = <&qusb2phy>; 564 phys = <&qusb2phy>;
560 phy-names = "usb2-phy"; 565 phy-names = "usb2-phy";
561 566
562 /* Fastest mode for USB 2 */ 567 /* Fastest mode for USB 2 */
563 maximum-speed = "high-speed"; 568 maximum-speed = "high-speed";
564 569
565 /* Force to peripheral until we can sw 570 /* Force to peripheral until we can switch modes */
566 dr_mode = "peripheral"; 571 dr_mode = "peripheral";
567 }; 572 };
568 573
569 &wifi { 574 &wifi {
570 /* Leave disabled until MSS is functio 575 /* Leave disabled until MSS is functional */
571 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8> 576 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
572 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 577 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
573 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 578 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
574 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 579 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
575 }; 580 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.