1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2021, AngeloGioacchino Del Re 3 * Copyright (c) 2021, AngeloGioacchino Del Regno
4 * <angelogioacchino.delreg 4 * <angelogioacchino.delregno@somainline.org>
5 * Copyright (c) 2021, Konrad Dybcio <konrad.dy 5 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
6 */ 6 */
7 7
8 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/leds/common.h> 9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
11 #include "msm8998.dtsi" 11 #include "msm8998.dtsi"
12 #include "pm8005.dtsi" 12 #include "pm8005.dtsi"
13 #include "pm8998.dtsi" 13 #include "pm8998.dtsi"
14 #include "pmi8998.dtsi" 14 #include "pmi8998.dtsi"
15 15
16 / { 16 / {
17 /* required for bootloader to select c 17 /* required for bootloader to select correct board */
18 qcom,msm-id = <0x124 0x20000>, <0x124 18 qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
19 qcom,board-id = <8 0>; 19 qcom,board-id = <8 0>;
20 20
21 clocks { 21 clocks {
22 div1_mclk: divclk1 { 22 div1_mclk: divclk1 {
23 compatible = "gpio-gat 23 compatible = "gpio-gate-clock";
24 pinctrl-0 = <&div_clk1 !! 24 pinctrl-0 = <&audio_mclk_pin>;
25 pinctrl-names = "defau 25 pinctrl-names = "default";
26 clocks = <&rpmcc RPM_S 26 clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
27 #clock-cells = <0>; 27 #clock-cells = <0>;
28 enable-gpios = <&pm899 28 enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
29 }; 29 };
30 }; 30 };
31 31
32 board_vbat: vbat-regulator { 32 board_vbat: vbat-regulator {
33 compatible = "regulator-fixed" 33 compatible = "regulator-fixed";
34 regulator-name = "VBAT"; 34 regulator-name = "VBAT";
35 35
36 regulator-min-microvolt = <400 36 regulator-min-microvolt = <4000000>;
37 regulator-max-microvolt = <400 37 regulator-max-microvolt = <4000000>;
38 regulator-always-on; 38 regulator-always-on;
39 regulator-boot-on; 39 regulator-boot-on;
40 }; 40 };
41 41
42 cam0_vdig_vreg: cam0-vdig { 42 cam0_vdig_vreg: cam0-vdig {
43 compatible = "regulator-fixed" 43 compatible = "regulator-fixed";
44 regulator-name = "cam0_vdig"; 44 regulator-name = "cam0_vdig";
45 startup-delay-us = <0>; 45 startup-delay-us = <0>;
46 enable-active-high; 46 enable-active-high;
47 gpio = <&tlmm 21 GPIO_ACTIVE_H 47 gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
48 pinctrl-names = "default"; 48 pinctrl-names = "default";
49 pinctrl-0 = <&main_cam_pwr_en> !! 49 pinctrl-0 = <&cam0_vdig_default>;
50 }; 50 };
51 51
52 cam1_vdig_vreg: cam1-vdig { 52 cam1_vdig_vreg: cam1-vdig {
53 compatible = "regulator-fixed" 53 compatible = "regulator-fixed";
54 regulator-name = "cam1_vdig"; 54 regulator-name = "cam1_vdig";
55 startup-delay-us = <0>; 55 startup-delay-us = <0>;
56 enable-active-high; 56 enable-active-high;
57 gpio = <&tlmm 25 GPIO_ACTIVE_H 57 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
58 pinctrl-names = "default"; 58 pinctrl-names = "default";
59 pinctrl-0 = <&chat_cam_pwr_en> !! 59 pinctrl-0 = <&cam1_vdig_default>;
60 vin-supply = <&vreg_s3a_1p35>; 60 vin-supply = <&vreg_s3a_1p35>;
61 }; 61 };
62 62
63 cam_vio_vreg: cam-vio-vreg { 63 cam_vio_vreg: cam-vio-vreg {
64 compatible = "regulator-fixed" 64 compatible = "regulator-fixed";
65 regulator-name = "cam_vio_vreg 65 regulator-name = "cam_vio_vreg";
66 startup-delay-us = <0>; 66 startup-delay-us = <0>;
67 enable-active-high; 67 enable-active-high;
68 gpio = <&pmi8998_gpios 1 GPIO_ 68 gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
69 pinctrl-names = "default"; 69 pinctrl-names = "default";
70 pinctrl-0 = <&main_cam_pwr_io_ !! 70 pinctrl-0 = <&cam_vio_default>;
71 vin-supply = <&vreg_lvs1a_1p8> 71 vin-supply = <&vreg_lvs1a_1p8>;
72 }; 72 };
73 73
74 touch_vddio_vreg: touch-vddio-vreg { 74 touch_vddio_vreg: touch-vddio-vreg {
75 compatible = "regulator-fixed" 75 compatible = "regulator-fixed";
76 regulator-name = "touch_vddio_ 76 regulator-name = "touch_vddio_vreg";
77 startup-delay-us = <10000>; 77 startup-delay-us = <10000>;
78 gpio = <&tlmm 133 GPIO_ACTIVE_ 78 gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
79 pinctrl-names = "default"; 79 pinctrl-names = "default";
80 pinctrl-0 = <&ts_vddio_en>; 80 pinctrl-0 = <&ts_vddio_en>;
81 }; 81 };
82 82
83 vph_pwr: vph-pwr-regulator { 83 vph_pwr: vph-pwr-regulator {
84 compatible = "regulator-fixed" 84 compatible = "regulator-fixed";
85 regulator-name = "vph_pwr"; 85 regulator-name = "vph_pwr";
86 regulator-always-on; 86 regulator-always-on;
87 regulator-boot-on; 87 regulator-boot-on;
88 }; 88 };
89 89
90 extcon_usb: extcon-usb { 90 extcon_usb: extcon-usb {
91 compatible = "linux,extcon-usb 91 compatible = "linux,extcon-usb-gpio";
92 id-gpios = <&tlmm 38 GPIO_ACTI !! 92 id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
93 vbus-gpios = <&tlmm 128 GPIO_A !! 93 vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>;
94 pinctrl-names = "default"; 94 pinctrl-names = "default";
95 pinctrl-0 = <&cc_dir_default & !! 95 pinctrl-0 = <&usb_extcon_active &usb_vbus_active>;
96 }; 96 };
97 97
98 gpio-keys { 98 gpio-keys {
99 compatible = "gpio-keys"; 99 compatible = "gpio-keys";
100 label = "Side buttons"; 100 label = "Side buttons";
101 pinctrl-0 = <&focus_n &snapsho <<
102 pinctrl-names = "default"; 101 pinctrl-names = "default";
103 button-camera-focus { !! 102 pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
104 label = "Camera Focus" !! 103 <&cam_snapshot_pin_a>;
105 gpios = <&pm8998_gpios !! 104 button-vol-down {
106 linux,code = <KEY_CAME !! 105 label = "Volume Down";
>> 106 gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
>> 107 linux,input-type = <EV_KEY>;
>> 108 linux,code = <KEY_VOLUMEDOWN>;
>> 109 gpio-key,wakeup;
107 debounce-interval = <1 110 debounce-interval = <15>;
108 }; 111 };
109 112
110 button-camera-snapshot { 113 button-camera-snapshot {
111 label = "Camera Snapsh 114 label = "Camera Snapshot";
112 gpios = <&pm8998_gpios 115 gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
>> 116 linux,input-type = <EV_KEY>;
113 linux,code = <KEY_CAME 117 linux,code = <KEY_CAMERA>;
114 debounce-interval = <1 118 debounce-interval = <15>;
115 }; 119 };
116 120
117 button-vol-down { !! 121 button-camera-focus {
118 label = "Volume Down"; !! 122 label = "Camera Focus";
119 gpios = <&pm8998_gpios !! 123 gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
120 linux,code = <KEY_VOLU !! 124 linux,input-type = <EV_KEY>;
121 wakeup-source; !! 125 linux,code = <KEY_CAMERA_FOCUS>;
122 debounce-interval = <1 <<
123 }; <<
124 <<
125 button-vol-up { <<
126 label = "Volume Up"; <<
127 gpios = <&pm8998_gpios <<
128 linux,code = <KEY_VOLU <<
129 wakeup-source; <<
130 debounce-interval = <1 126 debounce-interval = <15>;
131 }; 127 };
132 }; 128 };
133 129
134 gpio-hall-sensor { 130 gpio-hall-sensor {
135 compatible = "gpio-keys"; 131 compatible = "gpio-keys";
136 label = "Hall sensors"; 132 label = "Hall sensors";
137 pinctrl-names = "default"; 133 pinctrl-names = "default";
138 pinctrl-0 = <&acc_cover_open>; !! 134 pinctrl-0 = <&hall_sensor0_default>;
139 135
140 event-hall-sensor0 { 136 event-hall-sensor0 {
141 label = "Cover Hall Se 137 label = "Cover Hall Sensor";
142 gpios = <&tlmm 124 GPI 138 gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
143 linux,input-type = <EV 139 linux,input-type = <EV_SW>;
144 linux,code = <SW_LID>; 140 linux,code = <SW_LID>;
145 wakeup-source; !! 141 gpio-key,wakeup;
146 debounce-interval = <3 142 debounce-interval = <30>;
147 }; 143 };
148 }; 144 };
149 145
150 reserved-memory { 146 reserved-memory {
151 #address-cells = <2>; 147 #address-cells = <2>;
152 #size-cells = <2>; 148 #size-cells = <2>;
153 ranges; 149 ranges;
154 150
155 hyp_mem: memory@85800000 { 151 hyp_mem: memory@85800000 {
156 reg = <0x0 0x85800000 152 reg = <0x0 0x85800000 0x0 0x3700000>;
157 no-map; 153 no-map;
158 }; 154 };
159 155
160 cont_splash_mem: memory@9d4000 156 cont_splash_mem: memory@9d400000 {
161 reg = <0x0 0x9d400000 157 reg = <0x0 0x9d400000 0x0 0x2400000>;
162 no-map; 158 no-map;
163 }; 159 };
164 160
165 zap_shader_region: memory@f640 161 zap_shader_region: memory@f6400000 {
166 compatible = "shared-d 162 compatible = "shared-dma-pool";
167 reg = <0x0 0xf6400000 163 reg = <0x0 0xf6400000 0x0 0x2000>;
168 no-map; 164 no-map;
169 }; 165 };
170 166
171 adsp_region: memory@fe000000 { 167 adsp_region: memory@fe000000 {
172 reg = <0x0 0xfe000000 168 reg = <0x0 0xfe000000 0x0 0x800000>;
173 no-map; 169 no-map;
174 }; 170 };
175 171
176 qseecom_region: memory@fe80000 172 qseecom_region: memory@fe800000 {
177 reg = <0x0 0xfe800000 173 reg = <0x0 0xfe800000 0x0 0x1400000>;
178 no-map; 174 no-map;
179 }; 175 };
180 176
181 ramoops@ffc00000 { 177 ramoops@ffc00000 {
182 compatible = "ramoops" 178 compatible = "ramoops";
183 reg = <0x0 0xffc00000 179 reg = <0x0 0xffc00000 0x0 0x100000>;
184 record-size = <0x10000 180 record-size = <0x10000>;
185 console-size = <0x6000 181 console-size = <0x60000>;
186 ftrace-size = <0x10000 182 ftrace-size = <0x10000>;
187 pmsg-size = <0x20000>; 183 pmsg-size = <0x20000>;
188 ecc-size = <16>; 184 ecc-size = <16>;
189 }; 185 };
190 }; 186 };
191 187
192 vibrator { 188 vibrator {
193 compatible = "gpio-vibrator"; 189 compatible = "gpio-vibrator";
194 enable-gpios = <&pmi8998_gpios 190 enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
195 pinctrl-names = "default"; 191 pinctrl-names = "default";
196 pinctrl-0 = <&vib_ldo_en>; !! 192 pinctrl-0 = <&vib_default>;
197 }; 193 };
198 }; 194 };
199 195
200 &blsp1_i2c5 { 196 &blsp1_i2c5 {
201 status = "okay"; 197 status = "okay";
202 clock-frequency = <355000>; 198 clock-frequency = <355000>;
203 199
204 touchscreen@2c { 200 touchscreen@2c {
205 compatible = "syna,rmi4-i2c"; 201 compatible = "syna,rmi4-i2c";
206 reg = <0x2c>; 202 reg = <0x2c>;
207 #address-cells = <1>; 203 #address-cells = <1>;
208 #size-cells = <0>; 204 #size-cells = <0>;
209 interrupts-extended = <&tlmm 1 205 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
210 206
211 pinctrl-names = "default"; 207 pinctrl-names = "default";
212 pinctrl-0 = <&ts_int_n>; 208 pinctrl-0 = <&ts_int_n>;
213 209
214 vdd-supply = <&vreg_l28_3p0>; 210 vdd-supply = <&vreg_l28_3p0>;
215 vio-supply = <&touch_vddio_vre 211 vio-supply = <&touch_vddio_vreg>;
216 212
217 syna,reset-delay-ms = <220>; 213 syna,reset-delay-ms = <220>;
218 syna,startup-delay-ms = <1000> 214 syna,startup-delay-ms = <1000>;
219 215
220 rmi4-f01@1 { 216 rmi4-f01@1 {
221 reg = <0x01>; 217 reg = <0x01>;
222 syna,nosleep-mode = <1 218 syna,nosleep-mode = <1>;
223 }; 219 };
224 220
225 rmi4-f11@11 { 221 rmi4-f11@11 {
226 reg = <0x11>; 222 reg = <0x11>;
227 syna,sensor-type = <1> 223 syna,sensor-type = <1>;
228 }; 224 };
229 }; 225 };
230 }; 226 };
231 227
232 &blsp1_i2c5_sleep { 228 &blsp1_i2c5_sleep {
233 bias-disable; 229 bias-disable;
234 }; 230 };
235 231
236 &blsp1_uart3 { 232 &blsp1_uart3 {
237 status = "okay"; 233 status = "okay";
238 234
239 bluetooth { 235 bluetooth {
240 compatible = "qcom,wcn3990-bt" 236 compatible = "qcom,wcn3990-bt";
241 237
242 vddio-supply = <&vreg_s4a_1p8> 238 vddio-supply = <&vreg_s4a_1p8>;
243 vddxo-supply = <&vreg_l7a_1p8> 239 vddxo-supply = <&vreg_l7a_1p8>;
244 vddrf-supply = <&vreg_l17a_1p3 240 vddrf-supply = <&vreg_l17a_1p3>;
245 vddch0-supply = <&vreg_l25a_3p 241 vddch0-supply = <&vreg_l25a_3p3>;
246 max-speed = <3200000>; 242 max-speed = <3200000>;
247 243
248 clocks = <&rpmcc RPM_SMD_RF_CL 244 clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
249 }; 245 };
250 }; 246 };
251 247
252 &blsp2_uart1 { 248 &blsp2_uart1 {
253 status = "okay"; 249 status = "okay";
254 }; 250 };
255 251
256 &blsp2_i2c2 { 252 &blsp2_i2c2 {
257 status = "okay"; 253 status = "okay";
258 254
259 proximity@29 { 255 proximity@29 {
260 compatible = "st,vl53l0x"; 256 compatible = "st,vl53l0x";
261 reg = <0x29>; 257 reg = <0x29>;
262 258
263 interrupt-parent = <&tlmm>; 259 interrupt-parent = <&tlmm>;
264 interrupts = <22 IRQ_TYPE_EDGE 260 interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
265 261
266 reset-gpios = <&tlmm 27 GPIO_A 262 reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
267 vdd-supply = <&cam_vio_vreg>; 263 vdd-supply = <&cam_vio_vreg>;
268 264
269 pinctrl-names = "default"; 265 pinctrl-names = "default";
270 pinctrl-0 = <&tof_int_n &tof_r !! 266 pinctrl-0 = <&tof_int &tof_reset>;
271 }; 267 };
272 }; 268 };
273 269
274 &ibb { 270 &ibb {
275 regulator-min-microamp = <800000>; 271 regulator-min-microamp = <800000>;
276 regulator-max-microamp = <800000>; 272 regulator-max-microamp = <800000>;
277 regulator-enable-ramp-delay = <200>; 273 regulator-enable-ramp-delay = <200>;
278 regulator-over-current-protection; 274 regulator-over-current-protection;
279 regulator-pull-down; 275 regulator-pull-down;
280 regulator-ramp-delay = <1>; 276 regulator-ramp-delay = <1>;
281 regulator-settling-time-up-us = <600>; 277 regulator-settling-time-up-us = <600>;
282 regulator-settling-time-down-us = <100 278 regulator-settling-time-down-us = <1000>;
283 regulator-soft-start; 279 regulator-soft-start;
284 qcom,discharge-resistor-kohms = <300>; 280 qcom,discharge-resistor-kohms = <300>;
285 }; 281 };
286 282
287 &lab { 283 &lab {
288 regulator-min-microamp = <200000>; 284 regulator-min-microamp = <200000>;
289 regulator-max-microamp = <200000>; 285 regulator-max-microamp = <200000>;
290 regulator-enable-ramp-delay = <500>; 286 regulator-enable-ramp-delay = <500>;
291 regulator-over-current-protection; 287 regulator-over-current-protection;
292 regulator-pull-down; 288 regulator-pull-down;
293 regulator-ramp-delay = <1>; 289 regulator-ramp-delay = <1>;
294 regulator-settling-time-up-us = <50000 290 regulator-settling-time-up-us = <50000>;
295 regulator-settling-time-down-us = <300 291 regulator-settling-time-down-us = <3000>;
296 regulator-soft-start; 292 regulator-soft-start;
297 }; 293 };
298 294
299 &pm8005_gpios { <<
300 gpio-line-names = "NC", /* GPIO_1 */ <<
301 "NC", <<
302 "SLB", <<
303 "OPTION_1_PM8005"; <<
304 }; <<
305 <<
306 &pm8005_regulators { 295 &pm8005_regulators {
307 /* VDD_GFX supply */ 296 /* VDD_GFX supply */
308 pm8005_s1: s1 { 297 pm8005_s1: s1 {
309 regulator-min-microvolt = <524 298 regulator-min-microvolt = <524000>;
310 regulator-max-microvolt = <108 299 regulator-max-microvolt = <1088000>;
311 regulator-enable-ramp-delay = 300 regulator-enable-ramp-delay = <500>;
312 /* Hack until we rig up the gp 301 /* Hack until we rig up the gpu consumer */
313 regulator-always-on; 302 regulator-always-on;
314 }; 303 };
315 }; 304 };
316 305
317 &pm8998_gpios { 306 &pm8998_gpios {
318 gpio-line-names = "UIM_BATT_ALARM", /* !! 307 vol_down_pin_a: vol-down-active-state {
319 "NC", <<
320 "WLAN_SW_CTRL (DISAL <<
321 "SSC_PWR_EN", <<
322 "VOL_DOWN_N", <<
323 "VOL_UP_N", <<
324 "SNAPSHOT_N", <<
325 "FOCUS_N", <<
326 "FLASH_THERM", <<
327 "", /* GPIO_10 */ <<
328 "", <<
329 "", <<
330 "DIV_CLK1", <<
331 "NC", <<
332 "NC (DISALLOWED)", <<
333 "DIV_CLK3", <<
334 "NC", <<
335 "NC", <<
336 "NC", <<
337 "NC (DISALLOWED)", / <<
338 "NFC_CLK_REQ", <<
339 "NC (DISALLOWED)", <<
340 "WCSS_PWR_REQ", <<
341 "OPTION_1 (DISALLOWE <<
342 "OPTION_2 (DISALLOWE <<
343 "PM_SLB (DISALLOWED) <<
344 <<
345 vol_down_n: vol-down-n-state { <<
346 pins = "gpio5"; 308 pins = "gpio5";
347 function = PMIC_GPIO_FUNC_NORM 309 function = PMIC_GPIO_FUNC_NORMAL;
348 bias-pull-up; 310 bias-pull-up;
349 input-enable; 311 input-enable;
350 qcom,drive-strength = <PMIC_GP 312 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
351 }; 313 };
352 314
353 vol_up_n: vol-up-n-state { !! 315 cam_focus_pin_a: cam-focus-btn-active-state {
354 pins = "gpio6"; <<
355 function = PMIC_GPIO_FUNC_NORM <<
356 bias-pull-up; <<
357 input-enable; <<
358 qcom,drive-strength = <PMIC_GP <<
359 }; <<
360 <<
361 focus_n: focus-n-state { <<
362 pins = "gpio7"; 316 pins = "gpio7";
363 function = PMIC_GPIO_FUNC_NORM 317 function = PMIC_GPIO_FUNC_NORMAL;
364 bias-pull-up; 318 bias-pull-up;
365 input-enable; 319 input-enable;
366 qcom,drive-strength = <PMIC_GP 320 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
367 }; 321 };
368 322
369 snapshot_n: snapshot-n-state { !! 323 cam_snapshot_pin_a: cam-snapshot-btn-active-state {
370 pins = "gpio8"; 324 pins = "gpio8";
371 function = PMIC_GPIO_FUNC_NORM 325 function = PMIC_GPIO_FUNC_NORMAL;
372 bias-pull-up; 326 bias-pull-up;
373 input-enable; 327 input-enable;
374 qcom,drive-strength = <PMIC_GP 328 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
375 }; 329 };
376 330
377 div_clk1: div-clk1-state { !! 331 audio_mclk_pin: audio-mclk-pin-active-state {
378 pins = "gpio13"; 332 pins = "gpio13";
379 function = "func2"; 333 function = "func2";
380 power-source = <0>; 334 power-source = <0>;
381 }; 335 };
382 }; 336 };
383 337
384 &pmi8998_gpios { 338 &pmi8998_gpios {
385 gpio-line-names = "MAIN_CAM_PWR_IO_EN" !! 339 cam_vio_default: cam-vio-active-state {
386 "NC", <<
387 "NC", <<
388 "TYPEC_UUSB_SEL", <<
389 "VIB_LDO_EN", <<
390 "NC", <<
391 "DISPLAY_TYPE_SEL", <<
392 "NC", <<
393 "NC", <<
394 "NC", /* GPIO_10 */ <<
395 "NC", <<
396 "DIV_CLK3", <<
397 "SPMI_I2C_SEL", <<
398 "NC"; <<
399 <<
400 main_cam_pwr_io_en: main-cam-pwr-io-en <<
401 pins = "gpio1"; 340 pins = "gpio1";
402 function = PMIC_GPIO_FUNC_NORM 341 function = PMIC_GPIO_FUNC_NORMAL;
403 bias-disable; 342 bias-disable;
404 drive-push-pull; 343 drive-push-pull;
405 output-low; 344 output-low;
406 qcom,drive-strength = <PMIC_GP 345 qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
407 power-source = <1>; 346 power-source = <1>;
408 }; 347 };
409 348
410 vib_ldo_en: vib-ldo-en-state { !! 349 vib_default: vib-en-state {
411 pins = "gpio5"; 350 pins = "gpio5";
412 function = PMIC_GPIO_FUNC_NORM 351 function = PMIC_GPIO_FUNC_NORMAL;
413 bias-disable; 352 bias-disable;
414 drive-push-pull; 353 drive-push-pull;
415 output-low; 354 output-low;
416 qcom,drive-strength = <PMIC_GP 355 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
417 power-source = <0>; 356 power-source = <0>;
418 }; 357 };
419 }; 358 };
420 359
421 &pmi8998_lpg { !! 360 &pm8998_resin {
422 qcom,power-source = <1>; !! 361 linux,code = <KEY_VOLUMEUP>;
423 <<
424 status = "okay"; 362 status = "okay";
425 <<
426 multi-led { <<
427 color = <LED_COLOR_ID_RGB>; <<
428 function = LED_FUNCTION_STATUS <<
429 <<
430 #address-cells = <1>; <<
431 #size-cells = <0>; <<
432 <<
433 led@3 { <<
434 reg = <3>; <<
435 color = <LED_COLOR_ID_ <<
436 }; <<
437 <<
438 led@4 { <<
439 reg = <4>; <<
440 color = <LED_COLOR_ID_ <<
441 }; <<
442 <<
443 led@5 { <<
444 reg = <5>; <<
445 color = <LED_COLOR_ID_ <<
446 }; <<
447 }; <<
448 }; 363 };
449 364
450 &qusb2phy { 365 &qusb2phy {
451 status = "okay"; 366 status = "okay";
452 367
453 vdda-pll-supply = <&vreg_l12a_1p8>; 368 vdda-pll-supply = <&vreg_l12a_1p8>;
454 vdda-phy-dpdm-supply = <&vreg_l24a_3p0 369 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
455 }; 370 };
456 371
457 &rpm_requests { 372 &rpm_requests {
458 regulators-0 { 373 regulators-0 {
459 compatible = "qcom,rpm-pm8998- 374 compatible = "qcom,rpm-pm8998-regulators";
460 375
461 vdd_s1-supply = <&vph_pwr>; 376 vdd_s1-supply = <&vph_pwr>;
462 vdd_s2-supply = <&vph_pwr>; 377 vdd_s2-supply = <&vph_pwr>;
463 vdd_s3-supply = <&vph_pwr>; 378 vdd_s3-supply = <&vph_pwr>;
464 vdd_s4-supply = <&vph_pwr>; 379 vdd_s4-supply = <&vph_pwr>;
465 vdd_s5-supply = <&vph_pwr>; 380 vdd_s5-supply = <&vph_pwr>;
466 vdd_s6-supply = <&vph_pwr>; 381 vdd_s6-supply = <&vph_pwr>;
467 vdd_s7-supply = <&vph_pwr>; 382 vdd_s7-supply = <&vph_pwr>;
468 vdd_s8-supply = <&vph_pwr>; 383 vdd_s8-supply = <&vph_pwr>;
469 vdd_s9-supply = <&vph_pwr>; 384 vdd_s9-supply = <&vph_pwr>;
470 vdd_s10-supply = <&vph_pwr>; 385 vdd_s10-supply = <&vph_pwr>;
471 vdd_s11-supply = <&vph_pwr>; 386 vdd_s11-supply = <&vph_pwr>;
472 vdd_s12-supply = <&vph_pwr>; 387 vdd_s12-supply = <&vph_pwr>;
473 vdd_s13-supply = <&vph_pwr>; 388 vdd_s13-supply = <&vph_pwr>;
474 vdd_l1_l27-supply = <&vreg_s7a 389 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
475 vdd_l2_l8_l17-supply = <&vreg_ 390 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
476 vdd_l3_l11-supply = <&vreg_s7a 391 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
477 vdd_l4_l5-supply = <&vreg_s7a_ 392 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
478 vdd_l6-supply = <&vreg_s5a_2p0 393 vdd_l6-supply = <&vreg_s5a_2p04>;
479 vdd_l7_l12_l14_l15-supply = <& 394 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
480 vdd_l9-supply = <&vreg_bob>; 395 vdd_l9-supply = <&vreg_bob>;
481 vdd_l10_l23_l25-supply = <&vre 396 vdd_l10_l23_l25-supply = <&vreg_bob>;
482 vdd_l13_l19_l21-supply = <&vre 397 vdd_l13_l19_l21-supply = <&vreg_bob>;
483 vdd_l16_l28-supply = <&vreg_bo 398 vdd_l16_l28-supply = <&vreg_bob>;
484 vdd_l18_l22-supply = <&vreg_bo 399 vdd_l18_l22-supply = <&vreg_bob>;
485 vdd_l20_l24-supply = <&vreg_bo 400 vdd_l20_l24-supply = <&vreg_bob>;
486 vdd_l26-supply = <&vreg_s3a_1p 401 vdd_l26-supply = <&vreg_s3a_1p35>;
487 vdd_lvs1_lvs2-supply = <&vreg_ 402 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
488 403
489 vreg_s3a_1p35: s3 { 404 vreg_s3a_1p35: s3 {
490 regulator-min-microvol 405 regulator-min-microvolt = <1352000>;
491 regulator-max-microvol 406 regulator-max-microvolt = <1352000>;
492 }; 407 };
493 408
494 vreg_s4a_1p8: s4 { 409 vreg_s4a_1p8: s4 {
495 regulator-min-microvol 410 regulator-min-microvolt = <1800000>;
496 regulator-max-microvol 411 regulator-max-microvolt = <1800000>;
497 regulator-system-load 412 regulator-system-load = <100000>;
498 regulator-allow-set-lo 413 regulator-allow-set-load;
499 }; 414 };
500 415
501 vreg_s5a_2p04: s5 { 416 vreg_s5a_2p04: s5 {
502 regulator-min-microvol 417 regulator-min-microvolt = <1904000>;
503 regulator-max-microvol 418 regulator-max-microvolt = <2032000>;
504 }; 419 };
505 420
506 vreg_s7a_1p025: s7 { 421 vreg_s7a_1p025: s7 {
507 regulator-min-microvol 422 regulator-min-microvolt = <900000>;
508 regulator-max-microvol 423 regulator-max-microvolt = <1028000>;
509 }; 424 };
510 425
511 vreg_l1a_0p875: l1 { 426 vreg_l1a_0p875: l1 {
512 regulator-min-microvol 427 regulator-min-microvolt = <880000>;
513 regulator-max-microvol 428 regulator-max-microvolt = <880000>;
514 regulator-system-load 429 regulator-system-load = <73400>;
515 regulator-allow-set-lo 430 regulator-allow-set-load;
516 }; 431 };
517 432
518 vreg_l2a_1p2: l2 { 433 vreg_l2a_1p2: l2 {
519 regulator-min-microvol 434 regulator-min-microvolt = <1200000>;
520 regulator-max-microvol 435 regulator-max-microvolt = <1200000>;
521 regulator-system-load 436 regulator-system-load = <12560>;
522 regulator-allow-set-lo 437 regulator-allow-set-load;
523 }; 438 };
524 439
525 vreg_l3a_1p0: l3 { 440 vreg_l3a_1p0: l3 {
526 regulator-min-microvol 441 regulator-min-microvolt = <1000000>;
527 regulator-max-microvol 442 regulator-max-microvolt = <1000000>;
528 }; 443 };
529 444
530 vreg_l5a_0p8: l5 { 445 vreg_l5a_0p8: l5 {
531 regulator-min-microvol 446 regulator-min-microvolt = <800000>;
532 regulator-max-microvol 447 regulator-max-microvolt = <800000>;
533 }; 448 };
534 449
535 vreg_l6a_1p8: l6 { 450 vreg_l6a_1p8: l6 {
536 regulator-min-microvol 451 regulator-min-microvolt = <1800000>;
537 regulator-max-microvol 452 regulator-max-microvolt = <1800000>;
538 }; 453 };
539 454
540 vreg_l7a_1p8: l7 { 455 vreg_l7a_1p8: l7 {
541 regulator-min-microvol 456 regulator-min-microvolt = <1800000>;
542 regulator-max-microvol 457 regulator-max-microvolt = <1800000>;
543 }; 458 };
544 459
545 vreg_l8a_1p2: l8 { 460 vreg_l8a_1p2: l8 {
546 regulator-min-microvol 461 regulator-min-microvolt = <1200000>;
547 regulator-max-microvol 462 regulator-max-microvolt = <1200000>;
548 }; 463 };
549 464
550 vreg_l9a_1p8: l9 { 465 vreg_l9a_1p8: l9 {
551 regulator-min-microvol 466 regulator-min-microvolt = <1808000>;
552 regulator-max-microvol 467 regulator-max-microvolt = <2960000>;
553 }; 468 };
554 469
555 vreg_l10a_1p8: l10 { 470 vreg_l10a_1p8: l10 {
556 regulator-min-microvol 471 regulator-min-microvolt = <1808000>;
557 regulator-max-microvol 472 regulator-max-microvolt = <2960000>;
558 }; 473 };
559 474
560 vreg_l11a_1p0: l11 { 475 vreg_l11a_1p0: l11 {
561 regulator-min-microvol 476 regulator-min-microvolt = <1000000>;
562 regulator-max-microvol 477 regulator-max-microvolt = <1000000>;
563 }; 478 };
564 479
565 vreg_l12a_1p8: l12 { 480 vreg_l12a_1p8: l12 {
566 regulator-min-microvol 481 regulator-min-microvolt = <1800000>;
567 regulator-max-microvol 482 regulator-max-microvolt = <1800000>;
568 }; 483 };
569 484
570 vreg_l13a_2p95: l13 { 485 vreg_l13a_2p95: l13 {
571 regulator-min-microvol 486 regulator-min-microvolt = <1808000>;
572 regulator-max-microvol 487 regulator-max-microvolt = <2960000>;
573 regulator-allow-set-lo 488 regulator-allow-set-load;
574 }; 489 };
575 490
576 vreg_l14a_1p85: l14 { 491 vreg_l14a_1p85: l14 {
577 regulator-min-microvol 492 regulator-min-microvolt = <1848000>;
578 regulator-max-microvol 493 regulator-max-microvolt = <1856000>;
579 regulator-system-load 494 regulator-system-load = <32000>;
580 regulator-allow-set-lo 495 regulator-allow-set-load;
581 }; 496 };
582 497
583 vreg_l15a_1p8: l15 { 498 vreg_l15a_1p8: l15 {
584 regulator-min-microvol 499 regulator-min-microvolt = <1800000>;
585 regulator-max-microvol 500 regulator-max-microvolt = <1800000>;
586 }; 501 };
587 502
588 vreg_l16a_2p7: l16 { 503 vreg_l16a_2p7: l16 {
589 regulator-min-microvol 504 regulator-min-microvolt = <2704000>;
590 regulator-max-microvol 505 regulator-max-microvolt = <2704000>;
591 }; 506 };
592 507
593 vreg_l17a_1p3: l17 { 508 vreg_l17a_1p3: l17 {
594 regulator-min-microvol 509 regulator-min-microvolt = <1304000>;
595 regulator-max-microvol 510 regulator-max-microvolt = <1304000>;
596 }; 511 };
597 512
598 vreg_l18a_2p85: l18 { }; 513 vreg_l18a_2p85: l18 { };
599 514
600 vreg_l19a_2p7: l19 { 515 vreg_l19a_2p7: l19 {
601 regulator-min-microvol 516 regulator-min-microvolt = <2696000>;
602 regulator-max-microvol 517 regulator-max-microvolt = <2704000>;
603 }; 518 };
604 519
605 vreg_l20a_2p95: l20 { 520 vreg_l20a_2p95: l20 {
606 regulator-min-microvol 521 regulator-min-microvolt = <2960000>;
607 regulator-max-microvol 522 regulator-max-microvolt = <2960000>;
608 regulator-system-load 523 regulator-system-load = <10000>;
609 regulator-allow-set-lo 524 regulator-allow-set-load;
610 }; 525 };
611 526
612 vreg_l21a_2p95: l21 { 527 vreg_l21a_2p95: l21 {
613 regulator-min-microvol 528 regulator-min-microvolt = <2960000>;
614 regulator-max-microvol 529 regulator-max-microvolt = <2960000>;
615 regulator-system-load 530 regulator-system-load = <800000>;
616 regulator-allow-set-lo 531 regulator-allow-set-load;
617 }; 532 };
618 533
619 vreg_l22a_2p85: l22 { }; 534 vreg_l22a_2p85: l22 { };
620 535
621 vreg_l23a_3p3: l23 { 536 vreg_l23a_3p3: l23 {
622 regulator-min-microvol 537 regulator-min-microvolt = <3312000>;
623 regulator-max-microvol 538 regulator-max-microvolt = <3312000>;
624 }; 539 };
625 540
626 vreg_l24a_3p075: l24 { 541 vreg_l24a_3p075: l24 {
627 regulator-min-microvol 542 regulator-min-microvolt = <3088000>;
628 regulator-max-microvol 543 regulator-max-microvolt = <3088000>;
629 }; 544 };
630 545
631 vreg_l25a_3p3: l25 { 546 vreg_l25a_3p3: l25 {
632 regulator-min-microvol 547 regulator-min-microvolt = <3104000>;
633 regulator-max-microvol 548 regulator-max-microvolt = <3312000>;
634 }; 549 };
635 550
636 vreg_l26a_1p2: l26 { 551 vreg_l26a_1p2: l26 {
637 regulator-min-microvol 552 regulator-min-microvolt = <1200000>;
638 regulator-max-microvol 553 regulator-max-microvolt = <1200000>;
639 regulator-allow-set-lo 554 regulator-allow-set-load;
640 }; 555 };
641 556
642 vreg_l28_3p0: l28 { 557 vreg_l28_3p0: l28 {
643 regulator-min-microvol 558 regulator-min-microvolt = <3000000>;
644 regulator-max-microvol 559 regulator-max-microvolt = <3000000>;
645 }; 560 };
646 561
647 vreg_lvs1a_1p8: lvs1 { }; 562 vreg_lvs1a_1p8: lvs1 { };
648 563
649 vreg_lvs2a_1p8: lvs2 { }; 564 vreg_lvs2a_1p8: lvs2 { };
650 }; 565 };
651 566
652 regulators-1 { 567 regulators-1 {
653 compatible = "qcom,rpm-pmi8998 568 compatible = "qcom,rpm-pmi8998-regulators";
654 569
655 vdd_bob-supply = <&vph_pwr>; 570 vdd_bob-supply = <&vph_pwr>;
656 571
657 vreg_bob: bob { 572 vreg_bob: bob {
658 regulator-min-microvol 573 regulator-min-microvolt = <3312000>;
659 regulator-max-microvol 574 regulator-max-microvolt = <3600000>;
660 }; 575 };
661 }; 576 };
662 }; 577 };
663 578
664 &sdhc2 { 579 &sdhc2 {
665 status = "okay"; 580 status = "okay";
666 cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH> 581 cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
667 582
668 vmmc-supply = <&vreg_l21a_2p95>; 583 vmmc-supply = <&vreg_l21a_2p95>;
669 vqmmc-supply = <&vreg_l13a_2p95>; 584 vqmmc-supply = <&vreg_l13a_2p95>;
670 585
671 pinctrl-names = "default", "sleep"; 586 pinctrl-names = "default", "sleep";
672 pinctrl-0 = <&sdc2_on &sdc2_cd>; 587 pinctrl-0 = <&sdc2_on &sdc2_cd>;
673 pinctrl-1 = <&sdc2_off &sdc2_cd>; 588 pinctrl-1 = <&sdc2_off &sdc2_cd>;
674 }; 589 };
675 590
676 &tlmm { 591 &tlmm {
677 gpio-reserved-ranges = <0 4>, <81 4>; 592 gpio-reserved-ranges = <0 4>, <81 4>;
678 gpio-line-names = "", /* GPIO_0 */ <<
679 "", <<
680 "", <<
681 "", <<
682 "DEBUG_UART_TX", <<
683 "DEBUG_UART_RX", <<
684 "CAMSENSOR_I2C_SDA", <<
685 "CAMSENSOR_I2C_SCL", <<
686 "NC", <<
687 "NC", <<
688 "MDP_VSYNC_P", /* GP <<
689 "RGBC_IR_INT", <<
690 "NFC_VEN", <<
691 "CAM_MCLK0", <<
692 "CAM_MCLK1", <<
693 "NC", <<
694 "NC", <<
695 "CCI_I2C_SDA0", <<
696 "CCI_I2C_SCL0", <<
697 "CCI_I2C_SDA1", <<
698 "CCI_I2C_SCL1", /* G <<
699 "MAIN_CAM_PWR_EN", <<
700 "TOF_INT_N", <<
701 "NC", <<
702 "NC", <<
703 "CHAT_CAM_PWR_EN", <<
704 "NC", <<
705 "TOF_RESET_N", <<
706 "CAM2_RSTN", <<
707 "NC", <<
708 "CAM1_RSTN", /* GPIO <<
709 "NC", <<
710 "NC", <<
711 "NC", <<
712 "NC", <<
713 "NC", <<
714 "NC", <<
715 "NC", <<
716 "CC_DIR", <<
717 "UIM2_DETECT_EN", <<
718 "FP_RESET_N", /* GPI <<
719 "NC", <<
720 "NC", <<
721 "NC", <<
722 "NC", <<
723 "BT_HCI_UART_TXD", <<
724 "BT_HCI_UART_RXD", <<
725 "BT_HCI_UART_CTS_N", <<
726 "BT_HCI_UART_RFR_N", <<
727 "NC", <<
728 "NC", /* GPIO_50 */ <<
729 "NC", <<
730 "NC", <<
731 "CODEC_INT2_N", <<
732 "CODEC_INT1_N", <<
733 "APPS_I2C_SDA", <<
734 "APPS_I2C_SCL", <<
735 "FORCED_USB_BOOT", <<
736 "NC", <<
737 "NC", <<
738 "NC", /* GPIO_60 */ <<
739 "NC", <<
740 "NC", <<
741 "TRAY2_DET_DS", <<
742 "CODEC_RST_N", <<
743 "WSA_L_EN", <<
744 "WSA_R_EN", <<
745 "NC", <<
746 "NC", <<
747 "NC", <<
748 "LPASS_SLIMBUS_CLK", <<
749 "LPASS_SLIMBUS_DATA0 <<
750 "LPASS_SLIMBUS_DATA1 <<
751 "BT_FM_SLIMBUS_DATA" <<
752 "BT_FM_SLIMBUS_CLK", <<
753 "NC", <<
754 "RF_LCD_ID_EN", <<
755 "NC", <<
756 "NC", <<
757 "NC", <<
758 "NC", /* GPIO_80 */ <<
759 "SW_SERVICE", <<
760 "TX_GTR_THRES_IN", <<
761 "HW_ID0", <<
762 "HW_ID1", <<
763 "NC", <<
764 "NC", <<
765 "TS_I2C_SDA", <<
766 "TS_I2C_SCL", <<
767 "TS_RESET_N", <<
768 "NC", /* GPIO_90 */ <<
769 "NC", <<
770 "NFC_IRQ", <<
771 "NFC_DWLD_EN", <<
772 "DISP_RESET_N", <<
773 "TRAY2_DET", <<
774 "CAM_SOF", <<
775 "RFFE6_CLK", <<
776 "RFFE6_DATA", <<
777 "DEBUG_GPIO0", <<
778 "DEBUG_GPIO1", /* GP <<
779 "GRFC4", <<
780 "NC", <<
781 "NC", <<
782 "RSVD", <<
783 "UIM2_DATA", <<
784 "UIM2_CLK", <<
785 "UIM2_RESET", <<
786 "UIM2_PRESENT", <<
787 "UIM1_DATA", <<
788 "UIM1_CLK", /* GPIO_ <<
789 "UIM1_RST", <<
790 "UIM1_PRESENT", <<
791 "UIM_BATT_ALARM", <<
792 "RSVD", <<
793 "NC", <<
794 "NC", <<
795 "ACCEL_INT", <<
796 "GYRO_INT", <<
797 "COMPASS_INT", <<
798 "ALS_PROX_INT_N", /* <<
799 "FP_INT_N", <<
800 "NC", <<
801 "BAROMETER_INT", <<
802 "ACC_COVER_OPEN", <<
803 "TS_INT_N", <<
804 "NC", <<
805 "NC", <<
806 "USB_DETECT_EN", <<
807 "NC", <<
808 "QLINK_REQUEST", /* <<
809 "QLINK_ENABLE", <<
810 "NC", <<
811 "NC", <<
812 "WMSS_RESET_N", <<
813 "PA_INDICATOR_OR", <<
814 "NC", <<
815 "RFFE3_DATA", <<
816 "RFFE3_CLK", <<
817 "RFFE4_DATA", <<
818 "RFFE4_CLK", /* GPIO <<
819 "RFFE5_DATA", <<
820 "RFFE5_CLK", <<
821 "GNSS_EN", <<
822 "MSS_LTE_COXM_TXD", <<
823 "MSS_LTE_COXM_RXD", <<
824 "RFFE2_DATA", <<
825 "RFFE2_CLK", <<
826 "RFFE1_DATA", <<
827 "RFFE1_CLK"; <<
828 593
829 mdp_vsync_p: mdp-vsync-p-state { !! 594 mdp_vsync_n: mdp-vsync-n-state {
830 pins = "gpio10"; 595 pins = "gpio10";
831 function = "mdp_vsync_a"; 596 function = "mdp_vsync_a";
832 drive-strength = <2>; 597 drive-strength = <2>;
833 bias-pull-down; 598 bias-pull-down;
834 }; 599 };
835 600
836 nfc_ven: nfc-ven-state { 601 nfc_ven: nfc-ven-state {
837 pins = "gpio12"; 602 pins = "gpio12";
838 function = "gpio"; 603 function = "gpio";
839 bias-disable; 604 bias-disable;
840 drive-strength = <2>; 605 drive-strength = <2>;
841 output-low; 606 output-low;
842 }; 607 };
843 608
844 cam_mclk0_active: cam-mclk0-active-sta !! 609 msm_mclk0_default: msm-mclk0-active-state {
845 pins = "gpio13"; 610 pins = "gpio13";
846 function = "cam_mclk"; 611 function = "cam_mclk";
847 drive-strength = <2>; 612 drive-strength = <2>;
848 bias-disable; 613 bias-disable;
849 }; 614 };
850 615
851 cam_mclk1_active: cam-mclk1-active-sta !! 616 msm_mclk1_default: msm-mclk1-active-state {
852 pins = "gpio14"; 617 pins = "gpio14";
853 function = "cam_mclk"; 618 function = "cam_mclk";
854 drive-strength = <2>; 619 drive-strength = <2>;
855 bias-disable; 620 bias-disable;
856 }; 621 };
857 622
858 cci0_default: cci0-default-state { 623 cci0_default: cci0-default-state {
859 pins = "gpio18", "gpio19"; 624 pins = "gpio18", "gpio19";
860 function = "cci_i2c"; 625 function = "cci_i2c";
861 bias-disable; 626 bias-disable;
862 drive-strength = <2>; 627 drive-strength = <2>;
863 }; 628 };
864 629
865 cci1_default: cci1-default-state { 630 cci1_default: cci1-default-state {
866 pins = "gpio19", "gpio20"; 631 pins = "gpio19", "gpio20";
867 function = "cci_i2c"; 632 function = "cci_i2c";
868 bias-disable; 633 bias-disable;
869 drive-strength = <2>; 634 drive-strength = <2>;
870 }; 635 };
871 636
872 main_cam_pwr_en: main-cam-pwr-en-defau !! 637 cam0_vdig_default: cam0-vdig-default-state {
873 pins = "gpio21"; 638 pins = "gpio21";
874 function = "gpio"; 639 function = "gpio";
875 bias-disable; 640 bias-disable;
876 drive-strength = <2>; 641 drive-strength = <2>;
877 }; 642 };
878 643
879 tof_int_n: tof-int-n-state { !! 644 tof_int: tof-int-state {
880 pins = "gpio22"; 645 pins = "gpio22";
881 function = "gpio"; 646 function = "gpio";
882 bias-pull-up; 647 bias-pull-up;
883 drive-strength = <2>; 648 drive-strength = <2>;
>> 649 input-enable;
884 }; 650 };
885 651
886 chat_cam_pwr_en: chat-cam-pwr-en-defau !! 652 cam1_vdig_default: cam1-vdig-default-state {
887 pins = "gpio25"; 653 pins = "gpio25";
888 function = "gpio"; 654 function = "gpio";
889 bias-disable; 655 bias-disable;
890 drive-strength = <2>; 656 drive-strength = <2>;
891 }; 657 };
892 658
893 tof_reset: tof-reset-state { !! 659 usb_extcon_active: usb-extcon-active-state {
894 pins = "gpio27"; !! 660 pins = "gpio38";
895 function = "gpio"; 661 function = "gpio";
896 bias-disable; 662 bias-disable;
897 drive-strength = <2>; !! 663 drive-strength = <16>;
898 }; 664 };
899 665
900 cc_dir_default: cc-dir-active-state { !! 666 tof_reset: tof-reset-state {
901 pins = "gpio38"; !! 667 pins = "gpio27";
902 function = "gpio"; 668 function = "gpio";
903 bias-disable; 669 bias-disable;
904 drive-strength = <16>; !! 670 drive-strength = <2>;
905 }; 671 };
906 672
907 acc_cover_open: acc-cover-open-state { !! 673 hall_sensor0_default: acc-cover-open-state {
908 pins = "gpio124"; 674 pins = "gpio124";
909 function = "gpio"; 675 function = "gpio";
910 bias-disable; 676 bias-disable;
911 drive-strength = <2>; 677 drive-strength = <2>;
>> 678 input-enable;
912 }; 679 };
913 680
914 ts_int_n: ts-int-n-state { 681 ts_int_n: ts-int-n-state {
915 pins = "gpio125"; 682 pins = "gpio125";
916 function = "gpio"; 683 function = "gpio";
917 drive-strength = <8>; 684 drive-strength = <8>;
918 bias-pull-up; 685 bias-pull-up;
919 }; 686 };
920 687
921 usb_detect_en: usb-detect-en-active-st !! 688 usb_vbus_active: usb-vbus-active-state {
922 pins = "gpio128"; 689 pins = "gpio128";
923 function = "gpio"; 690 function = "gpio";
924 bias-disable; 691 bias-disable;
925 drive-strength = <2>; 692 drive-strength = <2>;
926 output-low; 693 output-low;
927 }; 694 };
928 695
929 ts_vddio_en: ts-vddio-en-default-state 696 ts_vddio_en: ts-vddio-en-default-state {
930 pins = "gpio133"; 697 pins = "gpio133";
931 function = "gpio"; 698 function = "gpio";
932 bias-disable; 699 bias-disable;
933 drive-strength = <2>; 700 drive-strength = <2>;
934 output-low; 701 output-low;
935 }; 702 };
936 }; 703 };
937 704
938 /* 705 /*
939 * WARNING: 706 * WARNING:
940 * Disable UFS until card quirks are in to avo 707 * Disable UFS until card quirks are in to avoid unrecoverable hard-brick
941 * that would happen as soon as the UFS card g 708 * that would happen as soon as the UFS card gets probed as, without the
942 * required quirks, the bootloader will be era 709 * required quirks, the bootloader will be erased right after card probe.
943 */ 710 */
944 &ufshc { 711 &ufshc {
945 status = "disabled"; 712 status = "disabled";
946 }; 713 };
947 714
948 &ufsphy { 715 &ufsphy {
949 status = "disabled"; 716 status = "disabled";
950 }; 717 };
951 718
952 &usb3 { 719 &usb3 {
953 status = "okay"; 720 status = "okay";
954 }; 721 };
955 722
956 &usb3_dwc3 { 723 &usb3_dwc3 {
957 /* Force to peripheral until we have T 724 /* Force to peripheral until we have Type-C hooked up */
958 dr_mode = "peripheral"; 725 dr_mode = "peripheral";
959 extcon = <&extcon_usb>; 726 extcon = <&extcon_usb>;
960 }; 727 };
961 728
962 &usb3phy { 729 &usb3phy {
963 status = "okay"; 730 status = "okay";
964 731
965 vdda-phy-supply = <&vreg_l1a_0p875>; 732 vdda-phy-supply = <&vreg_l1a_0p875>;
966 vdda-pll-supply = <&vreg_l2a_1p2>; 733 vdda-pll-supply = <&vreg_l2a_1p2>;
967 }; 734 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.