1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2021, AngeloGioacchino Del Re 3 * Copyright (c) 2021, AngeloGioacchino Del Regno
4 * <angelogioacchino.delreg 4 * <angelogioacchino.delregno@somainline.org>
5 * Copyright (c) 2021, Konrad Dybcio <konrad.dy 5 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
6 */ 6 */
7 7
8 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/leds/common.h> 9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
11 #include "msm8998.dtsi" 11 #include "msm8998.dtsi"
12 #include "pm8005.dtsi" 12 #include "pm8005.dtsi"
13 #include "pm8998.dtsi" 13 #include "pm8998.dtsi"
14 #include "pmi8998.dtsi" 14 #include "pmi8998.dtsi"
15 15
16 / { 16 / {
17 /* required for bootloader to select c 17 /* required for bootloader to select correct board */
18 qcom,msm-id = <0x124 0x20000>, <0x124 18 qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
19 qcom,board-id = <8 0>; 19 qcom,board-id = <8 0>;
20 20
21 clocks { 21 clocks {
22 div1_mclk: divclk1 { 22 div1_mclk: divclk1 {
23 compatible = "gpio-gat 23 compatible = "gpio-gate-clock";
24 pinctrl-0 = <&div_clk1 24 pinctrl-0 = <&div_clk1>;
25 pinctrl-names = "defau 25 pinctrl-names = "default";
26 clocks = <&rpmcc RPM_S 26 clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
27 #clock-cells = <0>; 27 #clock-cells = <0>;
28 enable-gpios = <&pm899 28 enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
29 }; 29 };
30 }; 30 };
31 31
32 board_vbat: vbat-regulator { 32 board_vbat: vbat-regulator {
33 compatible = "regulator-fixed" 33 compatible = "regulator-fixed";
34 regulator-name = "VBAT"; 34 regulator-name = "VBAT";
35 35
36 regulator-min-microvolt = <400 36 regulator-min-microvolt = <4000000>;
37 regulator-max-microvolt = <400 37 regulator-max-microvolt = <4000000>;
38 regulator-always-on; 38 regulator-always-on;
39 regulator-boot-on; 39 regulator-boot-on;
40 }; 40 };
41 41
42 cam0_vdig_vreg: cam0-vdig { 42 cam0_vdig_vreg: cam0-vdig {
43 compatible = "regulator-fixed" 43 compatible = "regulator-fixed";
44 regulator-name = "cam0_vdig"; 44 regulator-name = "cam0_vdig";
45 startup-delay-us = <0>; 45 startup-delay-us = <0>;
46 enable-active-high; 46 enable-active-high;
47 gpio = <&tlmm 21 GPIO_ACTIVE_H 47 gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
48 pinctrl-names = "default"; 48 pinctrl-names = "default";
49 pinctrl-0 = <&main_cam_pwr_en> 49 pinctrl-0 = <&main_cam_pwr_en>;
50 }; 50 };
51 51
52 cam1_vdig_vreg: cam1-vdig { 52 cam1_vdig_vreg: cam1-vdig {
53 compatible = "regulator-fixed" 53 compatible = "regulator-fixed";
54 regulator-name = "cam1_vdig"; 54 regulator-name = "cam1_vdig";
55 startup-delay-us = <0>; 55 startup-delay-us = <0>;
56 enable-active-high; 56 enable-active-high;
57 gpio = <&tlmm 25 GPIO_ACTIVE_H 57 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
58 pinctrl-names = "default"; 58 pinctrl-names = "default";
59 pinctrl-0 = <&chat_cam_pwr_en> 59 pinctrl-0 = <&chat_cam_pwr_en>;
60 vin-supply = <&vreg_s3a_1p35>; 60 vin-supply = <&vreg_s3a_1p35>;
61 }; 61 };
62 62
63 cam_vio_vreg: cam-vio-vreg { 63 cam_vio_vreg: cam-vio-vreg {
64 compatible = "regulator-fixed" 64 compatible = "regulator-fixed";
65 regulator-name = "cam_vio_vreg 65 regulator-name = "cam_vio_vreg";
66 startup-delay-us = <0>; 66 startup-delay-us = <0>;
67 enable-active-high; 67 enable-active-high;
68 gpio = <&pmi8998_gpios 1 GPIO_ 68 gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
69 pinctrl-names = "default"; 69 pinctrl-names = "default";
70 pinctrl-0 = <&main_cam_pwr_io_ 70 pinctrl-0 = <&main_cam_pwr_io_en>;
71 vin-supply = <&vreg_lvs1a_1p8> 71 vin-supply = <&vreg_lvs1a_1p8>;
72 }; 72 };
73 73
74 touch_vddio_vreg: touch-vddio-vreg { 74 touch_vddio_vreg: touch-vddio-vreg {
75 compatible = "regulator-fixed" 75 compatible = "regulator-fixed";
76 regulator-name = "touch_vddio_ 76 regulator-name = "touch_vddio_vreg";
77 startup-delay-us = <10000>; 77 startup-delay-us = <10000>;
78 gpio = <&tlmm 133 GPIO_ACTIVE_ 78 gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
79 pinctrl-names = "default"; 79 pinctrl-names = "default";
80 pinctrl-0 = <&ts_vddio_en>; 80 pinctrl-0 = <&ts_vddio_en>;
81 }; 81 };
82 82
83 vph_pwr: vph-pwr-regulator { 83 vph_pwr: vph-pwr-regulator {
84 compatible = "regulator-fixed" 84 compatible = "regulator-fixed";
85 regulator-name = "vph_pwr"; 85 regulator-name = "vph_pwr";
86 regulator-always-on; 86 regulator-always-on;
87 regulator-boot-on; 87 regulator-boot-on;
88 }; 88 };
89 89
90 extcon_usb: extcon-usb { 90 extcon_usb: extcon-usb {
91 compatible = "linux,extcon-usb 91 compatible = "linux,extcon-usb-gpio";
92 id-gpios = <&tlmm 38 GPIO_ACTI 92 id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
93 vbus-gpios = <&tlmm 128 GPIO_A 93 vbus-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
94 pinctrl-names = "default"; 94 pinctrl-names = "default";
95 pinctrl-0 = <&cc_dir_default & 95 pinctrl-0 = <&cc_dir_default &usb_detect_en>;
96 }; 96 };
97 97
98 gpio-keys { 98 gpio-keys {
99 compatible = "gpio-keys"; 99 compatible = "gpio-keys";
100 label = "Side buttons"; 100 label = "Side buttons";
101 pinctrl-0 = <&focus_n &snapsho <<
102 pinctrl-names = "default"; 101 pinctrl-names = "default";
103 button-camera-focus { !! 102 pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
104 label = "Camera Focus" !! 103 button-vol-down {
105 gpios = <&pm8998_gpios !! 104 label = "Volume Down";
106 linux,code = <KEY_CAME !! 105 gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
>> 106 linux,input-type = <EV_KEY>;
>> 107 linux,code = <KEY_VOLUMEDOWN>;
>> 108 wakeup-source;
107 debounce-interval = <1 109 debounce-interval = <15>;
108 }; 110 };
109 111
110 button-camera-snapshot { 112 button-camera-snapshot {
111 label = "Camera Snapsh 113 label = "Camera Snapshot";
112 gpios = <&pm8998_gpios 114 gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
>> 115 linux,input-type = <EV_KEY>;
113 linux,code = <KEY_CAME 116 linux,code = <KEY_CAMERA>;
114 debounce-interval = <1 117 debounce-interval = <15>;
115 }; 118 };
116 119
117 button-vol-down { !! 120 button-camera-focus {
118 label = "Volume Down"; !! 121 label = "Camera Focus";
119 gpios = <&pm8998_gpios !! 122 gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
120 linux,code = <KEY_VOLU !! 123 linux,input-type = <EV_KEY>;
121 wakeup-source; !! 124 linux,code = <KEY_CAMERA_FOCUS>;
122 debounce-interval = <1 <<
123 }; <<
124 <<
125 button-vol-up { <<
126 label = "Volume Up"; <<
127 gpios = <&pm8998_gpios <<
128 linux,code = <KEY_VOLU <<
129 wakeup-source; <<
130 debounce-interval = <1 125 debounce-interval = <15>;
131 }; 126 };
132 }; 127 };
133 128
134 gpio-hall-sensor { 129 gpio-hall-sensor {
135 compatible = "gpio-keys"; 130 compatible = "gpio-keys";
136 label = "Hall sensors"; 131 label = "Hall sensors";
137 pinctrl-names = "default"; 132 pinctrl-names = "default";
138 pinctrl-0 = <&acc_cover_open>; 133 pinctrl-0 = <&acc_cover_open>;
139 134
140 event-hall-sensor0 { 135 event-hall-sensor0 {
141 label = "Cover Hall Se 136 label = "Cover Hall Sensor";
142 gpios = <&tlmm 124 GPI 137 gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
143 linux,input-type = <EV 138 linux,input-type = <EV_SW>;
144 linux,code = <SW_LID>; 139 linux,code = <SW_LID>;
145 wakeup-source; 140 wakeup-source;
146 debounce-interval = <3 141 debounce-interval = <30>;
147 }; 142 };
148 }; 143 };
149 144
150 reserved-memory { 145 reserved-memory {
151 #address-cells = <2>; 146 #address-cells = <2>;
152 #size-cells = <2>; 147 #size-cells = <2>;
153 ranges; 148 ranges;
154 149
155 hyp_mem: memory@85800000 { 150 hyp_mem: memory@85800000 {
156 reg = <0x0 0x85800000 151 reg = <0x0 0x85800000 0x0 0x3700000>;
157 no-map; 152 no-map;
158 }; 153 };
159 154
160 cont_splash_mem: memory@9d4000 155 cont_splash_mem: memory@9d400000 {
161 reg = <0x0 0x9d400000 156 reg = <0x0 0x9d400000 0x0 0x2400000>;
162 no-map; 157 no-map;
163 }; 158 };
164 159
165 zap_shader_region: memory@f640 160 zap_shader_region: memory@f6400000 {
166 compatible = "shared-d 161 compatible = "shared-dma-pool";
167 reg = <0x0 0xf6400000 162 reg = <0x0 0xf6400000 0x0 0x2000>;
168 no-map; 163 no-map;
169 }; 164 };
170 165
171 adsp_region: memory@fe000000 { 166 adsp_region: memory@fe000000 {
172 reg = <0x0 0xfe000000 167 reg = <0x0 0xfe000000 0x0 0x800000>;
173 no-map; 168 no-map;
174 }; 169 };
175 170
176 qseecom_region: memory@fe80000 171 qseecom_region: memory@fe800000 {
177 reg = <0x0 0xfe800000 172 reg = <0x0 0xfe800000 0x0 0x1400000>;
178 no-map; 173 no-map;
179 }; 174 };
180 175
181 ramoops@ffc00000 { 176 ramoops@ffc00000 {
182 compatible = "ramoops" 177 compatible = "ramoops";
183 reg = <0x0 0xffc00000 178 reg = <0x0 0xffc00000 0x0 0x100000>;
184 record-size = <0x10000 179 record-size = <0x10000>;
185 console-size = <0x6000 180 console-size = <0x60000>;
186 ftrace-size = <0x10000 181 ftrace-size = <0x10000>;
187 pmsg-size = <0x20000>; 182 pmsg-size = <0x20000>;
188 ecc-size = <16>; 183 ecc-size = <16>;
189 }; 184 };
190 }; 185 };
191 186
192 vibrator { 187 vibrator {
193 compatible = "gpio-vibrator"; 188 compatible = "gpio-vibrator";
194 enable-gpios = <&pmi8998_gpios 189 enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
195 pinctrl-names = "default"; 190 pinctrl-names = "default";
196 pinctrl-0 = <&vib_ldo_en>; 191 pinctrl-0 = <&vib_ldo_en>;
197 }; 192 };
198 }; 193 };
199 194
200 &blsp1_i2c5 { 195 &blsp1_i2c5 {
201 status = "okay"; 196 status = "okay";
202 clock-frequency = <355000>; 197 clock-frequency = <355000>;
203 198
204 touchscreen@2c { 199 touchscreen@2c {
205 compatible = "syna,rmi4-i2c"; 200 compatible = "syna,rmi4-i2c";
206 reg = <0x2c>; 201 reg = <0x2c>;
207 #address-cells = <1>; 202 #address-cells = <1>;
208 #size-cells = <0>; 203 #size-cells = <0>;
209 interrupts-extended = <&tlmm 1 204 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
210 205
211 pinctrl-names = "default"; 206 pinctrl-names = "default";
212 pinctrl-0 = <&ts_int_n>; 207 pinctrl-0 = <&ts_int_n>;
213 208
214 vdd-supply = <&vreg_l28_3p0>; 209 vdd-supply = <&vreg_l28_3p0>;
215 vio-supply = <&touch_vddio_vre 210 vio-supply = <&touch_vddio_vreg>;
216 211
217 syna,reset-delay-ms = <220>; 212 syna,reset-delay-ms = <220>;
218 syna,startup-delay-ms = <1000> 213 syna,startup-delay-ms = <1000>;
219 214
220 rmi4-f01@1 { 215 rmi4-f01@1 {
221 reg = <0x01>; 216 reg = <0x01>;
222 syna,nosleep-mode = <1 217 syna,nosleep-mode = <1>;
223 }; 218 };
224 219
225 rmi4-f11@11 { 220 rmi4-f11@11 {
226 reg = <0x11>; 221 reg = <0x11>;
227 syna,sensor-type = <1> 222 syna,sensor-type = <1>;
228 }; 223 };
229 }; 224 };
230 }; 225 };
231 226
232 &blsp1_i2c5_sleep { 227 &blsp1_i2c5_sleep {
233 bias-disable; 228 bias-disable;
234 }; 229 };
235 230
236 &blsp1_uart3 { 231 &blsp1_uart3 {
237 status = "okay"; 232 status = "okay";
238 233
239 bluetooth { 234 bluetooth {
240 compatible = "qcom,wcn3990-bt" 235 compatible = "qcom,wcn3990-bt";
241 236
242 vddio-supply = <&vreg_s4a_1p8> 237 vddio-supply = <&vreg_s4a_1p8>;
243 vddxo-supply = <&vreg_l7a_1p8> 238 vddxo-supply = <&vreg_l7a_1p8>;
244 vddrf-supply = <&vreg_l17a_1p3 239 vddrf-supply = <&vreg_l17a_1p3>;
245 vddch0-supply = <&vreg_l25a_3p 240 vddch0-supply = <&vreg_l25a_3p3>;
246 max-speed = <3200000>; 241 max-speed = <3200000>;
247 242
248 clocks = <&rpmcc RPM_SMD_RF_CL 243 clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
249 }; 244 };
250 }; 245 };
251 246
252 &blsp2_uart1 { 247 &blsp2_uart1 {
253 status = "okay"; 248 status = "okay";
254 }; 249 };
255 250
256 &blsp2_i2c2 { 251 &blsp2_i2c2 {
257 status = "okay"; 252 status = "okay";
258 253
259 proximity@29 { 254 proximity@29 {
260 compatible = "st,vl53l0x"; 255 compatible = "st,vl53l0x";
261 reg = <0x29>; 256 reg = <0x29>;
262 257
263 interrupt-parent = <&tlmm>; 258 interrupt-parent = <&tlmm>;
264 interrupts = <22 IRQ_TYPE_EDGE 259 interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
265 260
266 reset-gpios = <&tlmm 27 GPIO_A 261 reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
267 vdd-supply = <&cam_vio_vreg>; 262 vdd-supply = <&cam_vio_vreg>;
268 263
269 pinctrl-names = "default"; 264 pinctrl-names = "default";
270 pinctrl-0 = <&tof_int_n &tof_r 265 pinctrl-0 = <&tof_int_n &tof_reset>;
271 }; 266 };
272 }; 267 };
273 268
274 &ibb { 269 &ibb {
275 regulator-min-microamp = <800000>; 270 regulator-min-microamp = <800000>;
276 regulator-max-microamp = <800000>; 271 regulator-max-microamp = <800000>;
277 regulator-enable-ramp-delay = <200>; 272 regulator-enable-ramp-delay = <200>;
278 regulator-over-current-protection; 273 regulator-over-current-protection;
279 regulator-pull-down; 274 regulator-pull-down;
280 regulator-ramp-delay = <1>; 275 regulator-ramp-delay = <1>;
281 regulator-settling-time-up-us = <600>; 276 regulator-settling-time-up-us = <600>;
282 regulator-settling-time-down-us = <100 277 regulator-settling-time-down-us = <1000>;
283 regulator-soft-start; 278 regulator-soft-start;
284 qcom,discharge-resistor-kohms = <300>; 279 qcom,discharge-resistor-kohms = <300>;
285 }; 280 };
286 281
287 &lab { 282 &lab {
288 regulator-min-microamp = <200000>; 283 regulator-min-microamp = <200000>;
289 regulator-max-microamp = <200000>; 284 regulator-max-microamp = <200000>;
290 regulator-enable-ramp-delay = <500>; 285 regulator-enable-ramp-delay = <500>;
291 regulator-over-current-protection; 286 regulator-over-current-protection;
292 regulator-pull-down; 287 regulator-pull-down;
293 regulator-ramp-delay = <1>; 288 regulator-ramp-delay = <1>;
294 regulator-settling-time-up-us = <50000 289 regulator-settling-time-up-us = <50000>;
295 regulator-settling-time-down-us = <300 290 regulator-settling-time-down-us = <3000>;
296 regulator-soft-start; 291 regulator-soft-start;
297 }; 292 };
298 293
299 &pm8005_gpios { 294 &pm8005_gpios {
300 gpio-line-names = "NC", /* GPIO_1 */ 295 gpio-line-names = "NC", /* GPIO_1 */
301 "NC", 296 "NC",
302 "SLB", 297 "SLB",
303 "OPTION_1_PM8005"; 298 "OPTION_1_PM8005";
304 }; 299 };
305 300
306 &pm8005_regulators { 301 &pm8005_regulators {
307 /* VDD_GFX supply */ 302 /* VDD_GFX supply */
308 pm8005_s1: s1 { 303 pm8005_s1: s1 {
309 regulator-min-microvolt = <524 304 regulator-min-microvolt = <524000>;
310 regulator-max-microvolt = <108 305 regulator-max-microvolt = <1088000>;
311 regulator-enable-ramp-delay = 306 regulator-enable-ramp-delay = <500>;
312 /* Hack until we rig up the gp 307 /* Hack until we rig up the gpu consumer */
313 regulator-always-on; 308 regulator-always-on;
314 }; 309 };
315 }; 310 };
316 311
317 &pm8998_gpios { 312 &pm8998_gpios {
318 gpio-line-names = "UIM_BATT_ALARM", /* 313 gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */
319 "NC", 314 "NC",
320 "WLAN_SW_CTRL (DISAL 315 "WLAN_SW_CTRL (DISALLOWED)",
321 "SSC_PWR_EN", 316 "SSC_PWR_EN",
322 "VOL_DOWN_N", 317 "VOL_DOWN_N",
323 "VOL_UP_N", 318 "VOL_UP_N",
324 "SNAPSHOT_N", 319 "SNAPSHOT_N",
325 "FOCUS_N", 320 "FOCUS_N",
326 "FLASH_THERM", 321 "FLASH_THERM",
327 "", /* GPIO_10 */ 322 "", /* GPIO_10 */
328 "", 323 "",
329 "", 324 "",
330 "DIV_CLK1", 325 "DIV_CLK1",
331 "NC", 326 "NC",
332 "NC (DISALLOWED)", 327 "NC (DISALLOWED)",
333 "DIV_CLK3", 328 "DIV_CLK3",
334 "NC", 329 "NC",
335 "NC", 330 "NC",
336 "NC", 331 "NC",
337 "NC (DISALLOWED)", / 332 "NC (DISALLOWED)", /* GPIO_20 */
338 "NFC_CLK_REQ", 333 "NFC_CLK_REQ",
339 "NC (DISALLOWED)", 334 "NC (DISALLOWED)",
340 "WCSS_PWR_REQ", 335 "WCSS_PWR_REQ",
341 "OPTION_1 (DISALLOWE 336 "OPTION_1 (DISALLOWED)",
342 "OPTION_2 (DISALLOWE 337 "OPTION_2 (DISALLOWED)",
343 "PM_SLB (DISALLOWED) 338 "PM_SLB (DISALLOWED)";
344 339
345 vol_down_n: vol-down-n-state { 340 vol_down_n: vol-down-n-state {
346 pins = "gpio5"; 341 pins = "gpio5";
347 function = PMIC_GPIO_FUNC_NORM 342 function = PMIC_GPIO_FUNC_NORMAL;
348 bias-pull-up; 343 bias-pull-up;
349 input-enable; 344 input-enable;
350 qcom,drive-strength = <PMIC_GP 345 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
351 }; 346 };
352 347
353 vol_up_n: vol-up-n-state { <<
354 pins = "gpio6"; <<
355 function = PMIC_GPIO_FUNC_NORM <<
356 bias-pull-up; <<
357 input-enable; <<
358 qcom,drive-strength = <PMIC_GP <<
359 }; <<
360 <<
361 focus_n: focus-n-state { 348 focus_n: focus-n-state {
362 pins = "gpio7"; 349 pins = "gpio7";
363 function = PMIC_GPIO_FUNC_NORM 350 function = PMIC_GPIO_FUNC_NORMAL;
364 bias-pull-up; 351 bias-pull-up;
365 input-enable; 352 input-enable;
366 qcom,drive-strength = <PMIC_GP 353 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
367 }; 354 };
368 355
369 snapshot_n: snapshot-n-state { 356 snapshot_n: snapshot-n-state {
370 pins = "gpio8"; 357 pins = "gpio8";
371 function = PMIC_GPIO_FUNC_NORM 358 function = PMIC_GPIO_FUNC_NORMAL;
372 bias-pull-up; 359 bias-pull-up;
373 input-enable; 360 input-enable;
374 qcom,drive-strength = <PMIC_GP 361 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
375 }; 362 };
376 363
377 div_clk1: div-clk1-state { 364 div_clk1: div-clk1-state {
378 pins = "gpio13"; 365 pins = "gpio13";
379 function = "func2"; 366 function = "func2";
380 power-source = <0>; 367 power-source = <0>;
381 }; 368 };
382 }; 369 };
383 370
384 &pmi8998_gpios { 371 &pmi8998_gpios {
385 gpio-line-names = "MAIN_CAM_PWR_IO_EN" 372 gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
386 "NC", 373 "NC",
387 "NC", 374 "NC",
388 "TYPEC_UUSB_SEL", 375 "TYPEC_UUSB_SEL",
389 "VIB_LDO_EN", 376 "VIB_LDO_EN",
390 "NC", 377 "NC",
391 "DISPLAY_TYPE_SEL", 378 "DISPLAY_TYPE_SEL",
392 "NC", 379 "NC",
393 "NC", 380 "NC",
394 "NC", /* GPIO_10 */ 381 "NC", /* GPIO_10 */
395 "NC", 382 "NC",
396 "DIV_CLK3", 383 "DIV_CLK3",
397 "SPMI_I2C_SEL", 384 "SPMI_I2C_SEL",
398 "NC"; 385 "NC";
399 386
400 main_cam_pwr_io_en: main-cam-pwr-io-en 387 main_cam_pwr_io_en: main-cam-pwr-io-en-state {
401 pins = "gpio1"; 388 pins = "gpio1";
402 function = PMIC_GPIO_FUNC_NORM 389 function = PMIC_GPIO_FUNC_NORMAL;
403 bias-disable; 390 bias-disable;
404 drive-push-pull; 391 drive-push-pull;
405 output-low; 392 output-low;
406 qcom,drive-strength = <PMIC_GP 393 qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
407 power-source = <1>; 394 power-source = <1>;
408 }; 395 };
409 396
410 vib_ldo_en: vib-ldo-en-state { 397 vib_ldo_en: vib-ldo-en-state {
411 pins = "gpio5"; 398 pins = "gpio5";
412 function = PMIC_GPIO_FUNC_NORM 399 function = PMIC_GPIO_FUNC_NORMAL;
413 bias-disable; 400 bias-disable;
414 drive-push-pull; 401 drive-push-pull;
415 output-low; 402 output-low;
416 qcom,drive-strength = <PMIC_GP 403 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
417 power-source = <0>; 404 power-source = <0>;
418 }; 405 };
419 }; 406 };
420 407
421 &pmi8998_lpg { !! 408 &pm8998_resin {
422 qcom,power-source = <1>; !! 409 linux,code = <KEY_VOLUMEUP>;
423 <<
424 status = "okay"; 410 status = "okay";
425 <<
426 multi-led { <<
427 color = <LED_COLOR_ID_RGB>; <<
428 function = LED_FUNCTION_STATUS <<
429 <<
430 #address-cells = <1>; <<
431 #size-cells = <0>; <<
432 <<
433 led@3 { <<
434 reg = <3>; <<
435 color = <LED_COLOR_ID_ <<
436 }; <<
437 <<
438 led@4 { <<
439 reg = <4>; <<
440 color = <LED_COLOR_ID_ <<
441 }; <<
442 <<
443 led@5 { <<
444 reg = <5>; <<
445 color = <LED_COLOR_ID_ <<
446 }; <<
447 }; <<
448 }; 411 };
449 412
450 &qusb2phy { 413 &qusb2phy {
451 status = "okay"; 414 status = "okay";
452 415
453 vdda-pll-supply = <&vreg_l12a_1p8>; 416 vdda-pll-supply = <&vreg_l12a_1p8>;
454 vdda-phy-dpdm-supply = <&vreg_l24a_3p0 417 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
455 }; 418 };
456 419
457 &rpm_requests { 420 &rpm_requests {
458 regulators-0 { 421 regulators-0 {
459 compatible = "qcom,rpm-pm8998- 422 compatible = "qcom,rpm-pm8998-regulators";
460 423
461 vdd_s1-supply = <&vph_pwr>; 424 vdd_s1-supply = <&vph_pwr>;
462 vdd_s2-supply = <&vph_pwr>; 425 vdd_s2-supply = <&vph_pwr>;
463 vdd_s3-supply = <&vph_pwr>; 426 vdd_s3-supply = <&vph_pwr>;
464 vdd_s4-supply = <&vph_pwr>; 427 vdd_s4-supply = <&vph_pwr>;
465 vdd_s5-supply = <&vph_pwr>; 428 vdd_s5-supply = <&vph_pwr>;
466 vdd_s6-supply = <&vph_pwr>; 429 vdd_s6-supply = <&vph_pwr>;
467 vdd_s7-supply = <&vph_pwr>; 430 vdd_s7-supply = <&vph_pwr>;
468 vdd_s8-supply = <&vph_pwr>; 431 vdd_s8-supply = <&vph_pwr>;
469 vdd_s9-supply = <&vph_pwr>; 432 vdd_s9-supply = <&vph_pwr>;
470 vdd_s10-supply = <&vph_pwr>; 433 vdd_s10-supply = <&vph_pwr>;
471 vdd_s11-supply = <&vph_pwr>; 434 vdd_s11-supply = <&vph_pwr>;
472 vdd_s12-supply = <&vph_pwr>; 435 vdd_s12-supply = <&vph_pwr>;
473 vdd_s13-supply = <&vph_pwr>; 436 vdd_s13-supply = <&vph_pwr>;
474 vdd_l1_l27-supply = <&vreg_s7a 437 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
475 vdd_l2_l8_l17-supply = <&vreg_ 438 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
476 vdd_l3_l11-supply = <&vreg_s7a 439 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
477 vdd_l4_l5-supply = <&vreg_s7a_ 440 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
478 vdd_l6-supply = <&vreg_s5a_2p0 441 vdd_l6-supply = <&vreg_s5a_2p04>;
479 vdd_l7_l12_l14_l15-supply = <& 442 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
480 vdd_l9-supply = <&vreg_bob>; 443 vdd_l9-supply = <&vreg_bob>;
481 vdd_l10_l23_l25-supply = <&vre 444 vdd_l10_l23_l25-supply = <&vreg_bob>;
482 vdd_l13_l19_l21-supply = <&vre 445 vdd_l13_l19_l21-supply = <&vreg_bob>;
483 vdd_l16_l28-supply = <&vreg_bo 446 vdd_l16_l28-supply = <&vreg_bob>;
484 vdd_l18_l22-supply = <&vreg_bo 447 vdd_l18_l22-supply = <&vreg_bob>;
485 vdd_l20_l24-supply = <&vreg_bo 448 vdd_l20_l24-supply = <&vreg_bob>;
486 vdd_l26-supply = <&vreg_s3a_1p 449 vdd_l26-supply = <&vreg_s3a_1p35>;
487 vdd_lvs1_lvs2-supply = <&vreg_ 450 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
488 451
489 vreg_s3a_1p35: s3 { 452 vreg_s3a_1p35: s3 {
490 regulator-min-microvol 453 regulator-min-microvolt = <1352000>;
491 regulator-max-microvol 454 regulator-max-microvolt = <1352000>;
492 }; 455 };
493 456
494 vreg_s4a_1p8: s4 { 457 vreg_s4a_1p8: s4 {
495 regulator-min-microvol 458 regulator-min-microvolt = <1800000>;
496 regulator-max-microvol 459 regulator-max-microvolt = <1800000>;
497 regulator-system-load 460 regulator-system-load = <100000>;
498 regulator-allow-set-lo 461 regulator-allow-set-load;
499 }; 462 };
500 463
501 vreg_s5a_2p04: s5 { 464 vreg_s5a_2p04: s5 {
502 regulator-min-microvol 465 regulator-min-microvolt = <1904000>;
503 regulator-max-microvol 466 regulator-max-microvolt = <2032000>;
504 }; 467 };
505 468
506 vreg_s7a_1p025: s7 { 469 vreg_s7a_1p025: s7 {
507 regulator-min-microvol 470 regulator-min-microvolt = <900000>;
508 regulator-max-microvol 471 regulator-max-microvolt = <1028000>;
509 }; 472 };
510 473
511 vreg_l1a_0p875: l1 { 474 vreg_l1a_0p875: l1 {
512 regulator-min-microvol 475 regulator-min-microvolt = <880000>;
513 regulator-max-microvol 476 regulator-max-microvolt = <880000>;
514 regulator-system-load 477 regulator-system-load = <73400>;
515 regulator-allow-set-lo 478 regulator-allow-set-load;
516 }; 479 };
517 480
518 vreg_l2a_1p2: l2 { 481 vreg_l2a_1p2: l2 {
519 regulator-min-microvol 482 regulator-min-microvolt = <1200000>;
520 regulator-max-microvol 483 regulator-max-microvolt = <1200000>;
521 regulator-system-load 484 regulator-system-load = <12560>;
522 regulator-allow-set-lo 485 regulator-allow-set-load;
523 }; 486 };
524 487
525 vreg_l3a_1p0: l3 { 488 vreg_l3a_1p0: l3 {
526 regulator-min-microvol 489 regulator-min-microvolt = <1000000>;
527 regulator-max-microvol 490 regulator-max-microvolt = <1000000>;
528 }; 491 };
529 492
530 vreg_l5a_0p8: l5 { 493 vreg_l5a_0p8: l5 {
531 regulator-min-microvol 494 regulator-min-microvolt = <800000>;
532 regulator-max-microvol 495 regulator-max-microvolt = <800000>;
533 }; 496 };
534 497
535 vreg_l6a_1p8: l6 { 498 vreg_l6a_1p8: l6 {
536 regulator-min-microvol 499 regulator-min-microvolt = <1800000>;
537 regulator-max-microvol 500 regulator-max-microvolt = <1800000>;
538 }; 501 };
539 502
540 vreg_l7a_1p8: l7 { 503 vreg_l7a_1p8: l7 {
541 regulator-min-microvol 504 regulator-min-microvolt = <1800000>;
542 regulator-max-microvol 505 regulator-max-microvolt = <1800000>;
543 }; 506 };
544 507
545 vreg_l8a_1p2: l8 { 508 vreg_l8a_1p2: l8 {
546 regulator-min-microvol 509 regulator-min-microvolt = <1200000>;
547 regulator-max-microvol 510 regulator-max-microvolt = <1200000>;
548 }; 511 };
549 512
550 vreg_l9a_1p8: l9 { 513 vreg_l9a_1p8: l9 {
551 regulator-min-microvol 514 regulator-min-microvolt = <1808000>;
552 regulator-max-microvol 515 regulator-max-microvolt = <2960000>;
553 }; 516 };
554 517
555 vreg_l10a_1p8: l10 { 518 vreg_l10a_1p8: l10 {
556 regulator-min-microvol 519 regulator-min-microvolt = <1808000>;
557 regulator-max-microvol 520 regulator-max-microvolt = <2960000>;
558 }; 521 };
559 522
560 vreg_l11a_1p0: l11 { 523 vreg_l11a_1p0: l11 {
561 regulator-min-microvol 524 regulator-min-microvolt = <1000000>;
562 regulator-max-microvol 525 regulator-max-microvolt = <1000000>;
563 }; 526 };
564 527
565 vreg_l12a_1p8: l12 { 528 vreg_l12a_1p8: l12 {
566 regulator-min-microvol 529 regulator-min-microvolt = <1800000>;
567 regulator-max-microvol 530 regulator-max-microvolt = <1800000>;
568 }; 531 };
569 532
570 vreg_l13a_2p95: l13 { 533 vreg_l13a_2p95: l13 {
571 regulator-min-microvol 534 regulator-min-microvolt = <1808000>;
572 regulator-max-microvol 535 regulator-max-microvolt = <2960000>;
573 regulator-allow-set-lo 536 regulator-allow-set-load;
574 }; 537 };
575 538
576 vreg_l14a_1p85: l14 { 539 vreg_l14a_1p85: l14 {
577 regulator-min-microvol 540 regulator-min-microvolt = <1848000>;
578 regulator-max-microvol 541 regulator-max-microvolt = <1856000>;
579 regulator-system-load 542 regulator-system-load = <32000>;
580 regulator-allow-set-lo 543 regulator-allow-set-load;
581 }; 544 };
582 545
583 vreg_l15a_1p8: l15 { 546 vreg_l15a_1p8: l15 {
584 regulator-min-microvol 547 regulator-min-microvolt = <1800000>;
585 regulator-max-microvol 548 regulator-max-microvolt = <1800000>;
586 }; 549 };
587 550
588 vreg_l16a_2p7: l16 { 551 vreg_l16a_2p7: l16 {
589 regulator-min-microvol 552 regulator-min-microvolt = <2704000>;
590 regulator-max-microvol 553 regulator-max-microvolt = <2704000>;
591 }; 554 };
592 555
593 vreg_l17a_1p3: l17 { 556 vreg_l17a_1p3: l17 {
594 regulator-min-microvol 557 regulator-min-microvolt = <1304000>;
595 regulator-max-microvol 558 regulator-max-microvolt = <1304000>;
596 }; 559 };
597 560
598 vreg_l18a_2p85: l18 { }; 561 vreg_l18a_2p85: l18 { };
599 562
600 vreg_l19a_2p7: l19 { 563 vreg_l19a_2p7: l19 {
601 regulator-min-microvol 564 regulator-min-microvolt = <2696000>;
602 regulator-max-microvol 565 regulator-max-microvolt = <2704000>;
603 }; 566 };
604 567
605 vreg_l20a_2p95: l20 { 568 vreg_l20a_2p95: l20 {
606 regulator-min-microvol 569 regulator-min-microvolt = <2960000>;
607 regulator-max-microvol 570 regulator-max-microvolt = <2960000>;
608 regulator-system-load 571 regulator-system-load = <10000>;
609 regulator-allow-set-lo 572 regulator-allow-set-load;
610 }; 573 };
611 574
612 vreg_l21a_2p95: l21 { 575 vreg_l21a_2p95: l21 {
613 regulator-min-microvol 576 regulator-min-microvolt = <2960000>;
614 regulator-max-microvol 577 regulator-max-microvolt = <2960000>;
615 regulator-system-load 578 regulator-system-load = <800000>;
616 regulator-allow-set-lo 579 regulator-allow-set-load;
617 }; 580 };
618 581
619 vreg_l22a_2p85: l22 { }; 582 vreg_l22a_2p85: l22 { };
620 583
621 vreg_l23a_3p3: l23 { 584 vreg_l23a_3p3: l23 {
622 regulator-min-microvol 585 regulator-min-microvolt = <3312000>;
623 regulator-max-microvol 586 regulator-max-microvolt = <3312000>;
624 }; 587 };
625 588
626 vreg_l24a_3p075: l24 { 589 vreg_l24a_3p075: l24 {
627 regulator-min-microvol 590 regulator-min-microvolt = <3088000>;
628 regulator-max-microvol 591 regulator-max-microvolt = <3088000>;
629 }; 592 };
630 593
631 vreg_l25a_3p3: l25 { 594 vreg_l25a_3p3: l25 {
632 regulator-min-microvol 595 regulator-min-microvolt = <3104000>;
633 regulator-max-microvol 596 regulator-max-microvolt = <3312000>;
634 }; 597 };
635 598
636 vreg_l26a_1p2: l26 { 599 vreg_l26a_1p2: l26 {
637 regulator-min-microvol 600 regulator-min-microvolt = <1200000>;
638 regulator-max-microvol 601 regulator-max-microvolt = <1200000>;
639 regulator-allow-set-lo 602 regulator-allow-set-load;
640 }; 603 };
641 604
642 vreg_l28_3p0: l28 { 605 vreg_l28_3p0: l28 {
643 regulator-min-microvol 606 regulator-min-microvolt = <3000000>;
644 regulator-max-microvol 607 regulator-max-microvolt = <3000000>;
645 }; 608 };
646 609
647 vreg_lvs1a_1p8: lvs1 { }; 610 vreg_lvs1a_1p8: lvs1 { };
648 611
649 vreg_lvs2a_1p8: lvs2 { }; 612 vreg_lvs2a_1p8: lvs2 { };
650 }; 613 };
651 614
652 regulators-1 { 615 regulators-1 {
653 compatible = "qcom,rpm-pmi8998 616 compatible = "qcom,rpm-pmi8998-regulators";
654 617
655 vdd_bob-supply = <&vph_pwr>; 618 vdd_bob-supply = <&vph_pwr>;
656 619
657 vreg_bob: bob { 620 vreg_bob: bob {
658 regulator-min-microvol 621 regulator-min-microvolt = <3312000>;
659 regulator-max-microvol 622 regulator-max-microvolt = <3600000>;
660 }; 623 };
661 }; 624 };
662 }; 625 };
663 626
664 &sdhc2 { 627 &sdhc2 {
665 status = "okay"; 628 status = "okay";
666 cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH> 629 cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
667 630
668 vmmc-supply = <&vreg_l21a_2p95>; 631 vmmc-supply = <&vreg_l21a_2p95>;
669 vqmmc-supply = <&vreg_l13a_2p95>; 632 vqmmc-supply = <&vreg_l13a_2p95>;
670 633
671 pinctrl-names = "default", "sleep"; 634 pinctrl-names = "default", "sleep";
672 pinctrl-0 = <&sdc2_on &sdc2_cd>; 635 pinctrl-0 = <&sdc2_on &sdc2_cd>;
673 pinctrl-1 = <&sdc2_off &sdc2_cd>; 636 pinctrl-1 = <&sdc2_off &sdc2_cd>;
674 }; 637 };
675 638
676 &tlmm { 639 &tlmm {
677 gpio-reserved-ranges = <0 4>, <81 4>; 640 gpio-reserved-ranges = <0 4>, <81 4>;
678 gpio-line-names = "", /* GPIO_0 */ 641 gpio-line-names = "", /* GPIO_0 */
679 "", 642 "",
680 "", 643 "",
681 "", 644 "",
682 "DEBUG_UART_TX", 645 "DEBUG_UART_TX",
683 "DEBUG_UART_RX", 646 "DEBUG_UART_RX",
684 "CAMSENSOR_I2C_SDA", 647 "CAMSENSOR_I2C_SDA",
685 "CAMSENSOR_I2C_SCL", 648 "CAMSENSOR_I2C_SCL",
686 "NC", 649 "NC",
687 "NC", 650 "NC",
688 "MDP_VSYNC_P", /* GP 651 "MDP_VSYNC_P", /* GPIO_10 */
689 "RGBC_IR_INT", 652 "RGBC_IR_INT",
690 "NFC_VEN", 653 "NFC_VEN",
691 "CAM_MCLK0", 654 "CAM_MCLK0",
692 "CAM_MCLK1", 655 "CAM_MCLK1",
693 "NC", 656 "NC",
694 "NC", 657 "NC",
695 "CCI_I2C_SDA0", 658 "CCI_I2C_SDA0",
696 "CCI_I2C_SCL0", 659 "CCI_I2C_SCL0",
697 "CCI_I2C_SDA1", 660 "CCI_I2C_SDA1",
698 "CCI_I2C_SCL1", /* G 661 "CCI_I2C_SCL1", /* GPIO_20 */
699 "MAIN_CAM_PWR_EN", 662 "MAIN_CAM_PWR_EN",
700 "TOF_INT_N", 663 "TOF_INT_N",
701 "NC", 664 "NC",
702 "NC", 665 "NC",
703 "CHAT_CAM_PWR_EN", 666 "CHAT_CAM_PWR_EN",
704 "NC", 667 "NC",
705 "TOF_RESET_N", 668 "TOF_RESET_N",
706 "CAM2_RSTN", 669 "CAM2_RSTN",
707 "NC", 670 "NC",
708 "CAM1_RSTN", /* GPIO 671 "CAM1_RSTN", /* GPIO_30 */
709 "NC", 672 "NC",
710 "NC", 673 "NC",
711 "NC", 674 "NC",
712 "NC", 675 "NC",
713 "NC", 676 "NC",
714 "NC", 677 "NC",
715 "NC", 678 "NC",
716 "CC_DIR", 679 "CC_DIR",
717 "UIM2_DETECT_EN", 680 "UIM2_DETECT_EN",
718 "FP_RESET_N", /* GPI 681 "FP_RESET_N", /* GPIO_40 */
719 "NC", 682 "NC",
720 "NC", 683 "NC",
721 "NC", 684 "NC",
722 "NC", 685 "NC",
723 "BT_HCI_UART_TXD", 686 "BT_HCI_UART_TXD",
724 "BT_HCI_UART_RXD", 687 "BT_HCI_UART_RXD",
725 "BT_HCI_UART_CTS_N", 688 "BT_HCI_UART_CTS_N",
726 "BT_HCI_UART_RFR_N", 689 "BT_HCI_UART_RFR_N",
727 "NC", 690 "NC",
728 "NC", /* GPIO_50 */ 691 "NC", /* GPIO_50 */
729 "NC", 692 "NC",
730 "NC", 693 "NC",
731 "CODEC_INT2_N", 694 "CODEC_INT2_N",
732 "CODEC_INT1_N", 695 "CODEC_INT1_N",
733 "APPS_I2C_SDA", 696 "APPS_I2C_SDA",
734 "APPS_I2C_SCL", 697 "APPS_I2C_SCL",
735 "FORCED_USB_BOOT", 698 "FORCED_USB_BOOT",
736 "NC", 699 "NC",
737 "NC", 700 "NC",
738 "NC", /* GPIO_60 */ 701 "NC", /* GPIO_60 */
739 "NC", 702 "NC",
740 "NC", 703 "NC",
741 "TRAY2_DET_DS", 704 "TRAY2_DET_DS",
742 "CODEC_RST_N", 705 "CODEC_RST_N",
743 "WSA_L_EN", 706 "WSA_L_EN",
744 "WSA_R_EN", 707 "WSA_R_EN",
745 "NC", 708 "NC",
746 "NC", 709 "NC",
747 "NC", 710 "NC",
748 "LPASS_SLIMBUS_CLK", 711 "LPASS_SLIMBUS_CLK", /* GPIO_70 */
749 "LPASS_SLIMBUS_DATA0 712 "LPASS_SLIMBUS_DATA0",
750 "LPASS_SLIMBUS_DATA1 713 "LPASS_SLIMBUS_DATA1",
751 "BT_FM_SLIMBUS_DATA" 714 "BT_FM_SLIMBUS_DATA",
752 "BT_FM_SLIMBUS_CLK", 715 "BT_FM_SLIMBUS_CLK",
753 "NC", 716 "NC",
754 "RF_LCD_ID_EN", 717 "RF_LCD_ID_EN",
755 "NC", 718 "NC",
756 "NC", 719 "NC",
757 "NC", 720 "NC",
758 "NC", /* GPIO_80 */ 721 "NC", /* GPIO_80 */
759 "SW_SERVICE", 722 "SW_SERVICE",
760 "TX_GTR_THRES_IN", 723 "TX_GTR_THRES_IN",
761 "HW_ID0", 724 "HW_ID0",
762 "HW_ID1", 725 "HW_ID1",
763 "NC", 726 "NC",
764 "NC", 727 "NC",
765 "TS_I2C_SDA", 728 "TS_I2C_SDA",
766 "TS_I2C_SCL", 729 "TS_I2C_SCL",
767 "TS_RESET_N", 730 "TS_RESET_N",
768 "NC", /* GPIO_90 */ 731 "NC", /* GPIO_90 */
769 "NC", 732 "NC",
770 "NFC_IRQ", 733 "NFC_IRQ",
771 "NFC_DWLD_EN", 734 "NFC_DWLD_EN",
772 "DISP_RESET_N", 735 "DISP_RESET_N",
773 "TRAY2_DET", 736 "TRAY2_DET",
774 "CAM_SOF", 737 "CAM_SOF",
775 "RFFE6_CLK", 738 "RFFE6_CLK",
776 "RFFE6_DATA", 739 "RFFE6_DATA",
777 "DEBUG_GPIO0", 740 "DEBUG_GPIO0",
778 "DEBUG_GPIO1", /* GP 741 "DEBUG_GPIO1", /* GPIO_100 */
779 "GRFC4", 742 "GRFC4",
780 "NC", 743 "NC",
781 "NC", 744 "NC",
782 "RSVD", 745 "RSVD",
783 "UIM2_DATA", 746 "UIM2_DATA",
784 "UIM2_CLK", 747 "UIM2_CLK",
785 "UIM2_RESET", 748 "UIM2_RESET",
786 "UIM2_PRESENT", 749 "UIM2_PRESENT",
787 "UIM1_DATA", 750 "UIM1_DATA",
788 "UIM1_CLK", /* GPIO_ 751 "UIM1_CLK", /* GPIO_110 */
789 "UIM1_RST", 752 "UIM1_RST",
790 "UIM1_PRESENT", 753 "UIM1_PRESENT",
791 "UIM_BATT_ALARM", 754 "UIM_BATT_ALARM",
792 "RSVD", 755 "RSVD",
793 "NC", 756 "NC",
794 "NC", 757 "NC",
795 "ACCEL_INT", 758 "ACCEL_INT",
796 "GYRO_INT", 759 "GYRO_INT",
797 "COMPASS_INT", 760 "COMPASS_INT",
798 "ALS_PROX_INT_N", /* 761 "ALS_PROX_INT_N", /* GPIO_120 */
799 "FP_INT_N", 762 "FP_INT_N",
800 "NC", 763 "NC",
801 "BAROMETER_INT", 764 "BAROMETER_INT",
802 "ACC_COVER_OPEN", 765 "ACC_COVER_OPEN",
803 "TS_INT_N", 766 "TS_INT_N",
804 "NC", 767 "NC",
805 "NC", 768 "NC",
806 "USB_DETECT_EN", 769 "USB_DETECT_EN",
807 "NC", 770 "NC",
808 "QLINK_REQUEST", /* 771 "QLINK_REQUEST", /* GPIO_130 */
809 "QLINK_ENABLE", 772 "QLINK_ENABLE",
810 "NC", 773 "NC",
811 "NC", 774 "NC",
812 "WMSS_RESET_N", 775 "WMSS_RESET_N",
813 "PA_INDICATOR_OR", 776 "PA_INDICATOR_OR",
814 "NC", 777 "NC",
815 "RFFE3_DATA", 778 "RFFE3_DATA",
816 "RFFE3_CLK", 779 "RFFE3_CLK",
817 "RFFE4_DATA", 780 "RFFE4_DATA",
818 "RFFE4_CLK", /* GPIO 781 "RFFE4_CLK", /* GPIO_140 */
819 "RFFE5_DATA", 782 "RFFE5_DATA",
820 "RFFE5_CLK", 783 "RFFE5_CLK",
821 "GNSS_EN", 784 "GNSS_EN",
822 "MSS_LTE_COXM_TXD", 785 "MSS_LTE_COXM_TXD",
823 "MSS_LTE_COXM_RXD", 786 "MSS_LTE_COXM_RXD",
824 "RFFE2_DATA", 787 "RFFE2_DATA",
825 "RFFE2_CLK", 788 "RFFE2_CLK",
826 "RFFE1_DATA", 789 "RFFE1_DATA",
827 "RFFE1_CLK"; 790 "RFFE1_CLK";
828 791
829 mdp_vsync_p: mdp-vsync-p-state { 792 mdp_vsync_p: mdp-vsync-p-state {
830 pins = "gpio10"; 793 pins = "gpio10";
831 function = "mdp_vsync_a"; 794 function = "mdp_vsync_a";
832 drive-strength = <2>; 795 drive-strength = <2>;
833 bias-pull-down; 796 bias-pull-down;
834 }; 797 };
835 798
836 nfc_ven: nfc-ven-state { 799 nfc_ven: nfc-ven-state {
837 pins = "gpio12"; 800 pins = "gpio12";
838 function = "gpio"; 801 function = "gpio";
839 bias-disable; 802 bias-disable;
840 drive-strength = <2>; 803 drive-strength = <2>;
841 output-low; 804 output-low;
842 }; 805 };
843 806
844 cam_mclk0_active: cam-mclk0-active-sta 807 cam_mclk0_active: cam-mclk0-active-state {
845 pins = "gpio13"; 808 pins = "gpio13";
846 function = "cam_mclk"; 809 function = "cam_mclk";
847 drive-strength = <2>; 810 drive-strength = <2>;
848 bias-disable; 811 bias-disable;
849 }; 812 };
850 813
851 cam_mclk1_active: cam-mclk1-active-sta 814 cam_mclk1_active: cam-mclk1-active-state {
852 pins = "gpio14"; 815 pins = "gpio14";
853 function = "cam_mclk"; 816 function = "cam_mclk";
854 drive-strength = <2>; 817 drive-strength = <2>;
855 bias-disable; 818 bias-disable;
856 }; 819 };
857 820
858 cci0_default: cci0-default-state { 821 cci0_default: cci0-default-state {
859 pins = "gpio18", "gpio19"; 822 pins = "gpio18", "gpio19";
860 function = "cci_i2c"; 823 function = "cci_i2c";
861 bias-disable; 824 bias-disable;
862 drive-strength = <2>; 825 drive-strength = <2>;
863 }; 826 };
864 827
865 cci1_default: cci1-default-state { 828 cci1_default: cci1-default-state {
866 pins = "gpio19", "gpio20"; 829 pins = "gpio19", "gpio20";
867 function = "cci_i2c"; 830 function = "cci_i2c";
868 bias-disable; 831 bias-disable;
869 drive-strength = <2>; 832 drive-strength = <2>;
870 }; 833 };
871 834
872 main_cam_pwr_en: main-cam-pwr-en-defau 835 main_cam_pwr_en: main-cam-pwr-en-default-state {
873 pins = "gpio21"; 836 pins = "gpio21";
874 function = "gpio"; 837 function = "gpio";
875 bias-disable; 838 bias-disable;
876 drive-strength = <2>; 839 drive-strength = <2>;
877 }; 840 };
878 841
879 tof_int_n: tof-int-n-state { 842 tof_int_n: tof-int-n-state {
880 pins = "gpio22"; 843 pins = "gpio22";
881 function = "gpio"; 844 function = "gpio";
882 bias-pull-up; 845 bias-pull-up;
883 drive-strength = <2>; 846 drive-strength = <2>;
884 }; 847 };
885 848
886 chat_cam_pwr_en: chat-cam-pwr-en-defau 849 chat_cam_pwr_en: chat-cam-pwr-en-default-state {
887 pins = "gpio25"; 850 pins = "gpio25";
888 function = "gpio"; 851 function = "gpio";
889 bias-disable; 852 bias-disable;
890 drive-strength = <2>; 853 drive-strength = <2>;
891 }; 854 };
892 855
893 tof_reset: tof-reset-state { 856 tof_reset: tof-reset-state {
894 pins = "gpio27"; 857 pins = "gpio27";
895 function = "gpio"; 858 function = "gpio";
896 bias-disable; 859 bias-disable;
897 drive-strength = <2>; 860 drive-strength = <2>;
898 }; 861 };
899 862
900 cc_dir_default: cc-dir-active-state { 863 cc_dir_default: cc-dir-active-state {
901 pins = "gpio38"; 864 pins = "gpio38";
902 function = "gpio"; 865 function = "gpio";
903 bias-disable; 866 bias-disable;
904 drive-strength = <16>; 867 drive-strength = <16>;
905 }; 868 };
906 869
907 acc_cover_open: acc-cover-open-state { 870 acc_cover_open: acc-cover-open-state {
908 pins = "gpio124"; 871 pins = "gpio124";
909 function = "gpio"; 872 function = "gpio";
910 bias-disable; 873 bias-disable;
911 drive-strength = <2>; 874 drive-strength = <2>;
912 }; 875 };
913 876
914 ts_int_n: ts-int-n-state { 877 ts_int_n: ts-int-n-state {
915 pins = "gpio125"; 878 pins = "gpio125";
916 function = "gpio"; 879 function = "gpio";
917 drive-strength = <8>; 880 drive-strength = <8>;
918 bias-pull-up; 881 bias-pull-up;
919 }; 882 };
920 883
921 usb_detect_en: usb-detect-en-active-st 884 usb_detect_en: usb-detect-en-active-state {
922 pins = "gpio128"; 885 pins = "gpio128";
923 function = "gpio"; 886 function = "gpio";
924 bias-disable; 887 bias-disable;
925 drive-strength = <2>; 888 drive-strength = <2>;
926 output-low; 889 output-low;
927 }; 890 };
928 891
929 ts_vddio_en: ts-vddio-en-default-state 892 ts_vddio_en: ts-vddio-en-default-state {
930 pins = "gpio133"; 893 pins = "gpio133";
931 function = "gpio"; 894 function = "gpio";
932 bias-disable; 895 bias-disable;
933 drive-strength = <2>; 896 drive-strength = <2>;
934 output-low; 897 output-low;
935 }; 898 };
936 }; 899 };
937 900
938 /* 901 /*
939 * WARNING: 902 * WARNING:
940 * Disable UFS until card quirks are in to avo 903 * Disable UFS until card quirks are in to avoid unrecoverable hard-brick
941 * that would happen as soon as the UFS card g 904 * that would happen as soon as the UFS card gets probed as, without the
942 * required quirks, the bootloader will be era 905 * required quirks, the bootloader will be erased right after card probe.
943 */ 906 */
944 &ufshc { 907 &ufshc {
945 status = "disabled"; 908 status = "disabled";
946 }; 909 };
947 910
948 &ufsphy { 911 &ufsphy {
949 status = "disabled"; 912 status = "disabled";
950 }; 913 };
951 914
952 &usb3 { 915 &usb3 {
953 status = "okay"; 916 status = "okay";
954 }; 917 };
955 918
956 &usb3_dwc3 { 919 &usb3_dwc3 {
957 /* Force to peripheral until we have T 920 /* Force to peripheral until we have Type-C hooked up */
958 dr_mode = "peripheral"; 921 dr_mode = "peripheral";
959 extcon = <&extcon_usb>; 922 extcon = <&extcon_usb>;
960 }; 923 };
961 924
962 &usb3phy { 925 &usb3phy {
963 status = "okay"; 926 status = "okay";
964 927
965 vdda-phy-supply = <&vreg_l1a_0p875>; 928 vdda-phy-supply = <&vreg_l1a_0p875>;
966 vdda-pll-supply = <&vreg_l2a_1p2>; 929 vdda-pll-supply = <&vreg_l2a_1p2>;
967 }; 930 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.