1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2021, AngeloGioacchino Del Re 3 * Copyright (c) 2021, AngeloGioacchino Del Regno
4 * <angelogioacchino.delreg 4 * <angelogioacchino.delregno@somainline.org>
5 * Copyright (c) 2021, Konrad Dybcio <konrad.dy 5 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
6 */ 6 */
7 7
8 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/leds/common.h> 9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
11 #include "msm8998.dtsi" 11 #include "msm8998.dtsi"
12 #include "pm8005.dtsi" 12 #include "pm8005.dtsi"
13 #include "pm8998.dtsi" 13 #include "pm8998.dtsi"
14 #include "pmi8998.dtsi" 14 #include "pmi8998.dtsi"
15 15
16 / { 16 / {
17 /* required for bootloader to select c 17 /* required for bootloader to select correct board */
18 qcom,msm-id = <0x124 0x20000>, <0x124 18 qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
19 qcom,board-id = <8 0>; 19 qcom,board-id = <8 0>;
20 20
21 clocks { 21 clocks {
22 div1_mclk: divclk1 { 22 div1_mclk: divclk1 {
23 compatible = "gpio-gat 23 compatible = "gpio-gate-clock";
24 pinctrl-0 = <&div_clk1 24 pinctrl-0 = <&div_clk1>;
25 pinctrl-names = "defau 25 pinctrl-names = "default";
26 clocks = <&rpmcc RPM_S 26 clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
27 #clock-cells = <0>; 27 #clock-cells = <0>;
28 enable-gpios = <&pm899 28 enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
29 }; 29 };
30 }; 30 };
31 31
32 board_vbat: vbat-regulator { 32 board_vbat: vbat-regulator {
33 compatible = "regulator-fixed" 33 compatible = "regulator-fixed";
34 regulator-name = "VBAT"; 34 regulator-name = "VBAT";
35 35
36 regulator-min-microvolt = <400 36 regulator-min-microvolt = <4000000>;
37 regulator-max-microvolt = <400 37 regulator-max-microvolt = <4000000>;
38 regulator-always-on; 38 regulator-always-on;
39 regulator-boot-on; 39 regulator-boot-on;
40 }; 40 };
41 41
42 cam0_vdig_vreg: cam0-vdig { 42 cam0_vdig_vreg: cam0-vdig {
43 compatible = "regulator-fixed" 43 compatible = "regulator-fixed";
44 regulator-name = "cam0_vdig"; 44 regulator-name = "cam0_vdig";
45 startup-delay-us = <0>; 45 startup-delay-us = <0>;
46 enable-active-high; 46 enable-active-high;
47 gpio = <&tlmm 21 GPIO_ACTIVE_H 47 gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
48 pinctrl-names = "default"; 48 pinctrl-names = "default";
49 pinctrl-0 = <&main_cam_pwr_en> 49 pinctrl-0 = <&main_cam_pwr_en>;
50 }; 50 };
51 51
52 cam1_vdig_vreg: cam1-vdig { 52 cam1_vdig_vreg: cam1-vdig {
53 compatible = "regulator-fixed" 53 compatible = "regulator-fixed";
54 regulator-name = "cam1_vdig"; 54 regulator-name = "cam1_vdig";
55 startup-delay-us = <0>; 55 startup-delay-us = <0>;
56 enable-active-high; 56 enable-active-high;
57 gpio = <&tlmm 25 GPIO_ACTIVE_H 57 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
58 pinctrl-names = "default"; 58 pinctrl-names = "default";
59 pinctrl-0 = <&chat_cam_pwr_en> 59 pinctrl-0 = <&chat_cam_pwr_en>;
60 vin-supply = <&vreg_s3a_1p35>; 60 vin-supply = <&vreg_s3a_1p35>;
61 }; 61 };
62 62
63 cam_vio_vreg: cam-vio-vreg { 63 cam_vio_vreg: cam-vio-vreg {
64 compatible = "regulator-fixed" 64 compatible = "regulator-fixed";
65 regulator-name = "cam_vio_vreg 65 regulator-name = "cam_vio_vreg";
66 startup-delay-us = <0>; 66 startup-delay-us = <0>;
67 enable-active-high; 67 enable-active-high;
68 gpio = <&pmi8998_gpios 1 GPIO_ 68 gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
69 pinctrl-names = "default"; 69 pinctrl-names = "default";
70 pinctrl-0 = <&main_cam_pwr_io_ 70 pinctrl-0 = <&main_cam_pwr_io_en>;
71 vin-supply = <&vreg_lvs1a_1p8> 71 vin-supply = <&vreg_lvs1a_1p8>;
72 }; 72 };
73 73
74 touch_vddio_vreg: touch-vddio-vreg { 74 touch_vddio_vreg: touch-vddio-vreg {
75 compatible = "regulator-fixed" 75 compatible = "regulator-fixed";
76 regulator-name = "touch_vddio_ 76 regulator-name = "touch_vddio_vreg";
77 startup-delay-us = <10000>; 77 startup-delay-us = <10000>;
78 gpio = <&tlmm 133 GPIO_ACTIVE_ 78 gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
79 pinctrl-names = "default"; 79 pinctrl-names = "default";
80 pinctrl-0 = <&ts_vddio_en>; 80 pinctrl-0 = <&ts_vddio_en>;
81 }; 81 };
82 82
83 vph_pwr: vph-pwr-regulator { 83 vph_pwr: vph-pwr-regulator {
84 compatible = "regulator-fixed" 84 compatible = "regulator-fixed";
85 regulator-name = "vph_pwr"; 85 regulator-name = "vph_pwr";
86 regulator-always-on; 86 regulator-always-on;
87 regulator-boot-on; 87 regulator-boot-on;
88 }; 88 };
89 89
90 extcon_usb: extcon-usb { 90 extcon_usb: extcon-usb {
91 compatible = "linux,extcon-usb 91 compatible = "linux,extcon-usb-gpio";
92 id-gpios = <&tlmm 38 GPIO_ACTI 92 id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
93 vbus-gpios = <&tlmm 128 GPIO_A 93 vbus-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
94 pinctrl-names = "default"; 94 pinctrl-names = "default";
95 pinctrl-0 = <&cc_dir_default & 95 pinctrl-0 = <&cc_dir_default &usb_detect_en>;
96 }; 96 };
97 97
98 gpio-keys { 98 gpio-keys {
99 compatible = "gpio-keys"; 99 compatible = "gpio-keys";
100 label = "Side buttons"; 100 label = "Side buttons";
101 pinctrl-0 = <&focus_n &snapsho 101 pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
102 pinctrl-names = "default"; 102 pinctrl-names = "default";
103 button-camera-focus { 103 button-camera-focus {
104 label = "Camera Focus" 104 label = "Camera Focus";
105 gpios = <&pm8998_gpios 105 gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
106 linux,code = <KEY_CAME 106 linux,code = <KEY_CAMERA_FOCUS>;
107 debounce-interval = <1 107 debounce-interval = <15>;
108 }; 108 };
109 109
110 button-camera-snapshot { 110 button-camera-snapshot {
111 label = "Camera Snapsh 111 label = "Camera Snapshot";
112 gpios = <&pm8998_gpios 112 gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
113 linux,code = <KEY_CAME 113 linux,code = <KEY_CAMERA>;
114 debounce-interval = <1 114 debounce-interval = <15>;
115 }; 115 };
116 116
117 button-vol-down { 117 button-vol-down {
118 label = "Volume Down"; 118 label = "Volume Down";
119 gpios = <&pm8998_gpios 119 gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
120 linux,code = <KEY_VOLU 120 linux,code = <KEY_VOLUMEDOWN>;
121 wakeup-source; 121 wakeup-source;
122 debounce-interval = <1 122 debounce-interval = <15>;
123 }; 123 };
124 124
125 button-vol-up { 125 button-vol-up {
126 label = "Volume Up"; 126 label = "Volume Up";
127 gpios = <&pm8998_gpios 127 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
128 linux,code = <KEY_VOLU 128 linux,code = <KEY_VOLUMEUP>;
129 wakeup-source; 129 wakeup-source;
130 debounce-interval = <1 130 debounce-interval = <15>;
131 }; 131 };
132 }; 132 };
133 133
134 gpio-hall-sensor { 134 gpio-hall-sensor {
135 compatible = "gpio-keys"; 135 compatible = "gpio-keys";
136 label = "Hall sensors"; 136 label = "Hall sensors";
137 pinctrl-names = "default"; 137 pinctrl-names = "default";
138 pinctrl-0 = <&acc_cover_open>; 138 pinctrl-0 = <&acc_cover_open>;
139 139
140 event-hall-sensor0 { 140 event-hall-sensor0 {
141 label = "Cover Hall Se 141 label = "Cover Hall Sensor";
142 gpios = <&tlmm 124 GPI 142 gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
143 linux,input-type = <EV 143 linux,input-type = <EV_SW>;
144 linux,code = <SW_LID>; 144 linux,code = <SW_LID>;
145 wakeup-source; 145 wakeup-source;
146 debounce-interval = <3 146 debounce-interval = <30>;
147 }; 147 };
148 }; 148 };
149 149
150 reserved-memory { 150 reserved-memory {
151 #address-cells = <2>; 151 #address-cells = <2>;
152 #size-cells = <2>; 152 #size-cells = <2>;
153 ranges; 153 ranges;
154 154
155 hyp_mem: memory@85800000 { 155 hyp_mem: memory@85800000 {
156 reg = <0x0 0x85800000 156 reg = <0x0 0x85800000 0x0 0x3700000>;
157 no-map; 157 no-map;
158 }; 158 };
159 159
160 cont_splash_mem: memory@9d4000 160 cont_splash_mem: memory@9d400000 {
161 reg = <0x0 0x9d400000 161 reg = <0x0 0x9d400000 0x0 0x2400000>;
162 no-map; 162 no-map;
163 }; 163 };
164 164
165 zap_shader_region: memory@f640 165 zap_shader_region: memory@f6400000 {
166 compatible = "shared-d 166 compatible = "shared-dma-pool";
167 reg = <0x0 0xf6400000 167 reg = <0x0 0xf6400000 0x0 0x2000>;
168 no-map; 168 no-map;
169 }; 169 };
170 170
171 adsp_region: memory@fe000000 { 171 adsp_region: memory@fe000000 {
172 reg = <0x0 0xfe000000 172 reg = <0x0 0xfe000000 0x0 0x800000>;
173 no-map; 173 no-map;
174 }; 174 };
175 175
176 qseecom_region: memory@fe80000 176 qseecom_region: memory@fe800000 {
177 reg = <0x0 0xfe800000 177 reg = <0x0 0xfe800000 0x0 0x1400000>;
178 no-map; 178 no-map;
179 }; 179 };
180 180
181 ramoops@ffc00000 { 181 ramoops@ffc00000 {
182 compatible = "ramoops" 182 compatible = "ramoops";
183 reg = <0x0 0xffc00000 183 reg = <0x0 0xffc00000 0x0 0x100000>;
184 record-size = <0x10000 184 record-size = <0x10000>;
185 console-size = <0x6000 185 console-size = <0x60000>;
186 ftrace-size = <0x10000 186 ftrace-size = <0x10000>;
187 pmsg-size = <0x20000>; 187 pmsg-size = <0x20000>;
188 ecc-size = <16>; 188 ecc-size = <16>;
189 }; 189 };
190 }; 190 };
191 191
192 vibrator { 192 vibrator {
193 compatible = "gpio-vibrator"; 193 compatible = "gpio-vibrator";
194 enable-gpios = <&pmi8998_gpios 194 enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
195 pinctrl-names = "default"; 195 pinctrl-names = "default";
196 pinctrl-0 = <&vib_ldo_en>; 196 pinctrl-0 = <&vib_ldo_en>;
197 }; 197 };
198 }; 198 };
199 199
200 &blsp1_i2c5 { 200 &blsp1_i2c5 {
201 status = "okay"; 201 status = "okay";
202 clock-frequency = <355000>; 202 clock-frequency = <355000>;
203 203
204 touchscreen@2c { 204 touchscreen@2c {
205 compatible = "syna,rmi4-i2c"; 205 compatible = "syna,rmi4-i2c";
206 reg = <0x2c>; 206 reg = <0x2c>;
207 #address-cells = <1>; 207 #address-cells = <1>;
208 #size-cells = <0>; 208 #size-cells = <0>;
209 interrupts-extended = <&tlmm 1 209 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
210 210
211 pinctrl-names = "default"; 211 pinctrl-names = "default";
212 pinctrl-0 = <&ts_int_n>; 212 pinctrl-0 = <&ts_int_n>;
213 213
214 vdd-supply = <&vreg_l28_3p0>; 214 vdd-supply = <&vreg_l28_3p0>;
215 vio-supply = <&touch_vddio_vre 215 vio-supply = <&touch_vddio_vreg>;
216 216
217 syna,reset-delay-ms = <220>; 217 syna,reset-delay-ms = <220>;
218 syna,startup-delay-ms = <1000> 218 syna,startup-delay-ms = <1000>;
219 219
220 rmi4-f01@1 { 220 rmi4-f01@1 {
221 reg = <0x01>; 221 reg = <0x01>;
222 syna,nosleep-mode = <1 222 syna,nosleep-mode = <1>;
223 }; 223 };
224 224
225 rmi4-f11@11 { 225 rmi4-f11@11 {
226 reg = <0x11>; 226 reg = <0x11>;
227 syna,sensor-type = <1> 227 syna,sensor-type = <1>;
228 }; 228 };
229 }; 229 };
230 }; 230 };
231 231
232 &blsp1_i2c5_sleep { 232 &blsp1_i2c5_sleep {
233 bias-disable; 233 bias-disable;
234 }; 234 };
235 235
236 &blsp1_uart3 { 236 &blsp1_uart3 {
237 status = "okay"; 237 status = "okay";
238 238
239 bluetooth { 239 bluetooth {
240 compatible = "qcom,wcn3990-bt" 240 compatible = "qcom,wcn3990-bt";
241 241
242 vddio-supply = <&vreg_s4a_1p8> 242 vddio-supply = <&vreg_s4a_1p8>;
243 vddxo-supply = <&vreg_l7a_1p8> 243 vddxo-supply = <&vreg_l7a_1p8>;
244 vddrf-supply = <&vreg_l17a_1p3 244 vddrf-supply = <&vreg_l17a_1p3>;
245 vddch0-supply = <&vreg_l25a_3p 245 vddch0-supply = <&vreg_l25a_3p3>;
246 max-speed = <3200000>; 246 max-speed = <3200000>;
247 247
248 clocks = <&rpmcc RPM_SMD_RF_CL 248 clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
249 }; 249 };
250 }; 250 };
251 251
252 &blsp2_uart1 { 252 &blsp2_uart1 {
253 status = "okay"; 253 status = "okay";
254 }; 254 };
255 255
256 &blsp2_i2c2 { 256 &blsp2_i2c2 {
257 status = "okay"; 257 status = "okay";
258 258
259 proximity@29 { 259 proximity@29 {
260 compatible = "st,vl53l0x"; 260 compatible = "st,vl53l0x";
261 reg = <0x29>; 261 reg = <0x29>;
262 262
263 interrupt-parent = <&tlmm>; 263 interrupt-parent = <&tlmm>;
264 interrupts = <22 IRQ_TYPE_EDGE 264 interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
265 265
266 reset-gpios = <&tlmm 27 GPIO_A 266 reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
267 vdd-supply = <&cam_vio_vreg>; 267 vdd-supply = <&cam_vio_vreg>;
268 268
269 pinctrl-names = "default"; 269 pinctrl-names = "default";
270 pinctrl-0 = <&tof_int_n &tof_r 270 pinctrl-0 = <&tof_int_n &tof_reset>;
271 }; 271 };
272 }; 272 };
273 273
274 &ibb { 274 &ibb {
275 regulator-min-microamp = <800000>; 275 regulator-min-microamp = <800000>;
276 regulator-max-microamp = <800000>; 276 regulator-max-microamp = <800000>;
277 regulator-enable-ramp-delay = <200>; 277 regulator-enable-ramp-delay = <200>;
278 regulator-over-current-protection; 278 regulator-over-current-protection;
279 regulator-pull-down; 279 regulator-pull-down;
280 regulator-ramp-delay = <1>; 280 regulator-ramp-delay = <1>;
281 regulator-settling-time-up-us = <600>; 281 regulator-settling-time-up-us = <600>;
282 regulator-settling-time-down-us = <100 282 regulator-settling-time-down-us = <1000>;
283 regulator-soft-start; 283 regulator-soft-start;
284 qcom,discharge-resistor-kohms = <300>; 284 qcom,discharge-resistor-kohms = <300>;
285 }; 285 };
286 286
287 &lab { 287 &lab {
288 regulator-min-microamp = <200000>; 288 regulator-min-microamp = <200000>;
289 regulator-max-microamp = <200000>; 289 regulator-max-microamp = <200000>;
290 regulator-enable-ramp-delay = <500>; 290 regulator-enable-ramp-delay = <500>;
291 regulator-over-current-protection; 291 regulator-over-current-protection;
292 regulator-pull-down; 292 regulator-pull-down;
293 regulator-ramp-delay = <1>; 293 regulator-ramp-delay = <1>;
294 regulator-settling-time-up-us = <50000 294 regulator-settling-time-up-us = <50000>;
295 regulator-settling-time-down-us = <300 295 regulator-settling-time-down-us = <3000>;
296 regulator-soft-start; 296 regulator-soft-start;
297 }; 297 };
298 298
299 &pm8005_gpios { 299 &pm8005_gpios {
300 gpio-line-names = "NC", /* GPIO_1 */ 300 gpio-line-names = "NC", /* GPIO_1 */
301 "NC", 301 "NC",
302 "SLB", 302 "SLB",
303 "OPTION_1_PM8005"; 303 "OPTION_1_PM8005";
304 }; 304 };
305 305
306 &pm8005_regulators { 306 &pm8005_regulators {
307 /* VDD_GFX supply */ 307 /* VDD_GFX supply */
308 pm8005_s1: s1 { 308 pm8005_s1: s1 {
309 regulator-min-microvolt = <524 309 regulator-min-microvolt = <524000>;
310 regulator-max-microvolt = <108 310 regulator-max-microvolt = <1088000>;
311 regulator-enable-ramp-delay = 311 regulator-enable-ramp-delay = <500>;
312 /* Hack until we rig up the gp 312 /* Hack until we rig up the gpu consumer */
313 regulator-always-on; 313 regulator-always-on;
314 }; 314 };
315 }; 315 };
316 316
317 &pm8998_gpios { 317 &pm8998_gpios {
318 gpio-line-names = "UIM_BATT_ALARM", /* 318 gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */
319 "NC", 319 "NC",
320 "WLAN_SW_CTRL (DISAL 320 "WLAN_SW_CTRL (DISALLOWED)",
321 "SSC_PWR_EN", 321 "SSC_PWR_EN",
322 "VOL_DOWN_N", 322 "VOL_DOWN_N",
323 "VOL_UP_N", 323 "VOL_UP_N",
324 "SNAPSHOT_N", 324 "SNAPSHOT_N",
325 "FOCUS_N", 325 "FOCUS_N",
326 "FLASH_THERM", 326 "FLASH_THERM",
327 "", /* GPIO_10 */ 327 "", /* GPIO_10 */
328 "", 328 "",
329 "", 329 "",
330 "DIV_CLK1", 330 "DIV_CLK1",
331 "NC", 331 "NC",
332 "NC (DISALLOWED)", 332 "NC (DISALLOWED)",
333 "DIV_CLK3", 333 "DIV_CLK3",
334 "NC", 334 "NC",
335 "NC", 335 "NC",
336 "NC", 336 "NC",
337 "NC (DISALLOWED)", / 337 "NC (DISALLOWED)", /* GPIO_20 */
338 "NFC_CLK_REQ", 338 "NFC_CLK_REQ",
339 "NC (DISALLOWED)", 339 "NC (DISALLOWED)",
340 "WCSS_PWR_REQ", 340 "WCSS_PWR_REQ",
341 "OPTION_1 (DISALLOWE 341 "OPTION_1 (DISALLOWED)",
342 "OPTION_2 (DISALLOWE 342 "OPTION_2 (DISALLOWED)",
343 "PM_SLB (DISALLOWED) 343 "PM_SLB (DISALLOWED)";
344 344
345 vol_down_n: vol-down-n-state { 345 vol_down_n: vol-down-n-state {
346 pins = "gpio5"; 346 pins = "gpio5";
347 function = PMIC_GPIO_FUNC_NORM 347 function = PMIC_GPIO_FUNC_NORMAL;
348 bias-pull-up; 348 bias-pull-up;
349 input-enable; 349 input-enable;
350 qcom,drive-strength = <PMIC_GP 350 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
351 }; 351 };
352 352
353 vol_up_n: vol-up-n-state { 353 vol_up_n: vol-up-n-state {
354 pins = "gpio6"; 354 pins = "gpio6";
355 function = PMIC_GPIO_FUNC_NORM 355 function = PMIC_GPIO_FUNC_NORMAL;
356 bias-pull-up; 356 bias-pull-up;
357 input-enable; 357 input-enable;
358 qcom,drive-strength = <PMIC_GP 358 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
359 }; 359 };
360 360
361 focus_n: focus-n-state { 361 focus_n: focus-n-state {
362 pins = "gpio7"; 362 pins = "gpio7";
363 function = PMIC_GPIO_FUNC_NORM 363 function = PMIC_GPIO_FUNC_NORMAL;
364 bias-pull-up; 364 bias-pull-up;
365 input-enable; 365 input-enable;
366 qcom,drive-strength = <PMIC_GP 366 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
367 }; 367 };
368 368
369 snapshot_n: snapshot-n-state { 369 snapshot_n: snapshot-n-state {
370 pins = "gpio8"; 370 pins = "gpio8";
371 function = PMIC_GPIO_FUNC_NORM 371 function = PMIC_GPIO_FUNC_NORMAL;
372 bias-pull-up; 372 bias-pull-up;
373 input-enable; 373 input-enable;
374 qcom,drive-strength = <PMIC_GP 374 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
375 }; 375 };
376 376
377 div_clk1: div-clk1-state { 377 div_clk1: div-clk1-state {
378 pins = "gpio13"; 378 pins = "gpio13";
379 function = "func2"; 379 function = "func2";
380 power-source = <0>; 380 power-source = <0>;
381 }; 381 };
382 }; 382 };
383 383
384 &pmi8998_gpios { 384 &pmi8998_gpios {
385 gpio-line-names = "MAIN_CAM_PWR_IO_EN" 385 gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
386 "NC", 386 "NC",
387 "NC", 387 "NC",
388 "TYPEC_UUSB_SEL", 388 "TYPEC_UUSB_SEL",
389 "VIB_LDO_EN", 389 "VIB_LDO_EN",
390 "NC", 390 "NC",
391 "DISPLAY_TYPE_SEL", 391 "DISPLAY_TYPE_SEL",
392 "NC", 392 "NC",
393 "NC", 393 "NC",
394 "NC", /* GPIO_10 */ 394 "NC", /* GPIO_10 */
395 "NC", 395 "NC",
396 "DIV_CLK3", 396 "DIV_CLK3",
397 "SPMI_I2C_SEL", 397 "SPMI_I2C_SEL",
398 "NC"; 398 "NC";
399 399
400 main_cam_pwr_io_en: main-cam-pwr-io-en 400 main_cam_pwr_io_en: main-cam-pwr-io-en-state {
401 pins = "gpio1"; 401 pins = "gpio1";
402 function = PMIC_GPIO_FUNC_NORM 402 function = PMIC_GPIO_FUNC_NORMAL;
403 bias-disable; 403 bias-disable;
404 drive-push-pull; 404 drive-push-pull;
405 output-low; 405 output-low;
406 qcom,drive-strength = <PMIC_GP 406 qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
407 power-source = <1>; 407 power-source = <1>;
408 }; 408 };
409 409
410 vib_ldo_en: vib-ldo-en-state { 410 vib_ldo_en: vib-ldo-en-state {
411 pins = "gpio5"; 411 pins = "gpio5";
412 function = PMIC_GPIO_FUNC_NORM 412 function = PMIC_GPIO_FUNC_NORMAL;
413 bias-disable; 413 bias-disable;
414 drive-push-pull; 414 drive-push-pull;
415 output-low; 415 output-low;
416 qcom,drive-strength = <PMIC_GP 416 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
417 power-source = <0>; 417 power-source = <0>;
418 }; 418 };
419 }; 419 };
420 420
421 &pmi8998_lpg { 421 &pmi8998_lpg {
422 qcom,power-source = <1>; 422 qcom,power-source = <1>;
423 423
424 status = "okay"; 424 status = "okay";
425 425
426 multi-led { 426 multi-led {
427 color = <LED_COLOR_ID_RGB>; 427 color = <LED_COLOR_ID_RGB>;
428 function = LED_FUNCTION_STATUS 428 function = LED_FUNCTION_STATUS;
429 429
430 #address-cells = <1>; 430 #address-cells = <1>;
431 #size-cells = <0>; 431 #size-cells = <0>;
432 432
433 led@3 { 433 led@3 {
434 reg = <3>; 434 reg = <3>;
435 color = <LED_COLOR_ID_ 435 color = <LED_COLOR_ID_BLUE>;
436 }; 436 };
437 437
438 led@4 { 438 led@4 {
439 reg = <4>; 439 reg = <4>;
440 color = <LED_COLOR_ID_ 440 color = <LED_COLOR_ID_GREEN>;
441 }; 441 };
442 442
443 led@5 { 443 led@5 {
444 reg = <5>; 444 reg = <5>;
445 color = <LED_COLOR_ID_ 445 color = <LED_COLOR_ID_RED>;
446 }; 446 };
447 }; 447 };
448 }; 448 };
449 449
450 &qusb2phy { 450 &qusb2phy {
451 status = "okay"; 451 status = "okay";
452 452
453 vdda-pll-supply = <&vreg_l12a_1p8>; 453 vdda-pll-supply = <&vreg_l12a_1p8>;
454 vdda-phy-dpdm-supply = <&vreg_l24a_3p0 454 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
455 }; 455 };
456 456
457 &rpm_requests { 457 &rpm_requests {
458 regulators-0 { 458 regulators-0 {
459 compatible = "qcom,rpm-pm8998- 459 compatible = "qcom,rpm-pm8998-regulators";
460 460
461 vdd_s1-supply = <&vph_pwr>; 461 vdd_s1-supply = <&vph_pwr>;
462 vdd_s2-supply = <&vph_pwr>; 462 vdd_s2-supply = <&vph_pwr>;
463 vdd_s3-supply = <&vph_pwr>; 463 vdd_s3-supply = <&vph_pwr>;
464 vdd_s4-supply = <&vph_pwr>; 464 vdd_s4-supply = <&vph_pwr>;
465 vdd_s5-supply = <&vph_pwr>; 465 vdd_s5-supply = <&vph_pwr>;
466 vdd_s6-supply = <&vph_pwr>; 466 vdd_s6-supply = <&vph_pwr>;
467 vdd_s7-supply = <&vph_pwr>; 467 vdd_s7-supply = <&vph_pwr>;
468 vdd_s8-supply = <&vph_pwr>; 468 vdd_s8-supply = <&vph_pwr>;
469 vdd_s9-supply = <&vph_pwr>; 469 vdd_s9-supply = <&vph_pwr>;
470 vdd_s10-supply = <&vph_pwr>; 470 vdd_s10-supply = <&vph_pwr>;
471 vdd_s11-supply = <&vph_pwr>; 471 vdd_s11-supply = <&vph_pwr>;
472 vdd_s12-supply = <&vph_pwr>; 472 vdd_s12-supply = <&vph_pwr>;
473 vdd_s13-supply = <&vph_pwr>; 473 vdd_s13-supply = <&vph_pwr>;
474 vdd_l1_l27-supply = <&vreg_s7a 474 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
475 vdd_l2_l8_l17-supply = <&vreg_ 475 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
476 vdd_l3_l11-supply = <&vreg_s7a 476 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
477 vdd_l4_l5-supply = <&vreg_s7a_ 477 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
478 vdd_l6-supply = <&vreg_s5a_2p0 478 vdd_l6-supply = <&vreg_s5a_2p04>;
479 vdd_l7_l12_l14_l15-supply = <& 479 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
480 vdd_l9-supply = <&vreg_bob>; 480 vdd_l9-supply = <&vreg_bob>;
481 vdd_l10_l23_l25-supply = <&vre 481 vdd_l10_l23_l25-supply = <&vreg_bob>;
482 vdd_l13_l19_l21-supply = <&vre 482 vdd_l13_l19_l21-supply = <&vreg_bob>;
483 vdd_l16_l28-supply = <&vreg_bo 483 vdd_l16_l28-supply = <&vreg_bob>;
484 vdd_l18_l22-supply = <&vreg_bo 484 vdd_l18_l22-supply = <&vreg_bob>;
485 vdd_l20_l24-supply = <&vreg_bo 485 vdd_l20_l24-supply = <&vreg_bob>;
486 vdd_l26-supply = <&vreg_s3a_1p 486 vdd_l26-supply = <&vreg_s3a_1p35>;
487 vdd_lvs1_lvs2-supply = <&vreg_ 487 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
488 488
489 vreg_s3a_1p35: s3 { 489 vreg_s3a_1p35: s3 {
490 regulator-min-microvol 490 regulator-min-microvolt = <1352000>;
491 regulator-max-microvol 491 regulator-max-microvolt = <1352000>;
492 }; 492 };
493 493
494 vreg_s4a_1p8: s4 { 494 vreg_s4a_1p8: s4 {
495 regulator-min-microvol 495 regulator-min-microvolt = <1800000>;
496 regulator-max-microvol 496 regulator-max-microvolt = <1800000>;
497 regulator-system-load 497 regulator-system-load = <100000>;
498 regulator-allow-set-lo 498 regulator-allow-set-load;
499 }; 499 };
500 500
501 vreg_s5a_2p04: s5 { 501 vreg_s5a_2p04: s5 {
502 regulator-min-microvol 502 regulator-min-microvolt = <1904000>;
503 regulator-max-microvol 503 regulator-max-microvolt = <2032000>;
504 }; 504 };
505 505
506 vreg_s7a_1p025: s7 { 506 vreg_s7a_1p025: s7 {
507 regulator-min-microvol 507 regulator-min-microvolt = <900000>;
508 regulator-max-microvol 508 regulator-max-microvolt = <1028000>;
509 }; 509 };
510 510
511 vreg_l1a_0p875: l1 { 511 vreg_l1a_0p875: l1 {
512 regulator-min-microvol 512 regulator-min-microvolt = <880000>;
513 regulator-max-microvol 513 regulator-max-microvolt = <880000>;
514 regulator-system-load 514 regulator-system-load = <73400>;
515 regulator-allow-set-lo 515 regulator-allow-set-load;
516 }; 516 };
517 517
518 vreg_l2a_1p2: l2 { 518 vreg_l2a_1p2: l2 {
519 regulator-min-microvol 519 regulator-min-microvolt = <1200000>;
520 regulator-max-microvol 520 regulator-max-microvolt = <1200000>;
521 regulator-system-load 521 regulator-system-load = <12560>;
522 regulator-allow-set-lo 522 regulator-allow-set-load;
523 }; 523 };
524 524
525 vreg_l3a_1p0: l3 { 525 vreg_l3a_1p0: l3 {
526 regulator-min-microvol 526 regulator-min-microvolt = <1000000>;
527 regulator-max-microvol 527 regulator-max-microvolt = <1000000>;
528 }; 528 };
529 529
530 vreg_l5a_0p8: l5 { 530 vreg_l5a_0p8: l5 {
531 regulator-min-microvol 531 regulator-min-microvolt = <800000>;
532 regulator-max-microvol 532 regulator-max-microvolt = <800000>;
533 }; 533 };
534 534
535 vreg_l6a_1p8: l6 { 535 vreg_l6a_1p8: l6 {
536 regulator-min-microvol 536 regulator-min-microvolt = <1800000>;
537 regulator-max-microvol 537 regulator-max-microvolt = <1800000>;
538 }; 538 };
539 539
540 vreg_l7a_1p8: l7 { 540 vreg_l7a_1p8: l7 {
541 regulator-min-microvol 541 regulator-min-microvolt = <1800000>;
542 regulator-max-microvol 542 regulator-max-microvolt = <1800000>;
543 }; 543 };
544 544
545 vreg_l8a_1p2: l8 { 545 vreg_l8a_1p2: l8 {
546 regulator-min-microvol 546 regulator-min-microvolt = <1200000>;
547 regulator-max-microvol 547 regulator-max-microvolt = <1200000>;
548 }; 548 };
549 549
550 vreg_l9a_1p8: l9 { 550 vreg_l9a_1p8: l9 {
551 regulator-min-microvol 551 regulator-min-microvolt = <1808000>;
552 regulator-max-microvol 552 regulator-max-microvolt = <2960000>;
553 }; 553 };
554 554
555 vreg_l10a_1p8: l10 { 555 vreg_l10a_1p8: l10 {
556 regulator-min-microvol 556 regulator-min-microvolt = <1808000>;
557 regulator-max-microvol 557 regulator-max-microvolt = <2960000>;
558 }; 558 };
559 559
560 vreg_l11a_1p0: l11 { 560 vreg_l11a_1p0: l11 {
561 regulator-min-microvol 561 regulator-min-microvolt = <1000000>;
562 regulator-max-microvol 562 regulator-max-microvolt = <1000000>;
563 }; 563 };
564 564
565 vreg_l12a_1p8: l12 { 565 vreg_l12a_1p8: l12 {
566 regulator-min-microvol 566 regulator-min-microvolt = <1800000>;
567 regulator-max-microvol 567 regulator-max-microvolt = <1800000>;
568 }; 568 };
569 569
570 vreg_l13a_2p95: l13 { 570 vreg_l13a_2p95: l13 {
571 regulator-min-microvol 571 regulator-min-microvolt = <1808000>;
572 regulator-max-microvol 572 regulator-max-microvolt = <2960000>;
573 regulator-allow-set-lo 573 regulator-allow-set-load;
574 }; 574 };
575 575
576 vreg_l14a_1p85: l14 { 576 vreg_l14a_1p85: l14 {
577 regulator-min-microvol 577 regulator-min-microvolt = <1848000>;
578 regulator-max-microvol 578 regulator-max-microvolt = <1856000>;
579 regulator-system-load 579 regulator-system-load = <32000>;
580 regulator-allow-set-lo 580 regulator-allow-set-load;
581 }; 581 };
582 582
583 vreg_l15a_1p8: l15 { 583 vreg_l15a_1p8: l15 {
584 regulator-min-microvol 584 regulator-min-microvolt = <1800000>;
585 regulator-max-microvol 585 regulator-max-microvolt = <1800000>;
586 }; 586 };
587 587
588 vreg_l16a_2p7: l16 { 588 vreg_l16a_2p7: l16 {
589 regulator-min-microvol 589 regulator-min-microvolt = <2704000>;
590 regulator-max-microvol 590 regulator-max-microvolt = <2704000>;
591 }; 591 };
592 592
593 vreg_l17a_1p3: l17 { 593 vreg_l17a_1p3: l17 {
594 regulator-min-microvol 594 regulator-min-microvolt = <1304000>;
595 regulator-max-microvol 595 regulator-max-microvolt = <1304000>;
596 }; 596 };
597 597
598 vreg_l18a_2p85: l18 { }; 598 vreg_l18a_2p85: l18 { };
599 599
600 vreg_l19a_2p7: l19 { 600 vreg_l19a_2p7: l19 {
601 regulator-min-microvol 601 regulator-min-microvolt = <2696000>;
602 regulator-max-microvol 602 regulator-max-microvolt = <2704000>;
603 }; 603 };
604 604
605 vreg_l20a_2p95: l20 { 605 vreg_l20a_2p95: l20 {
606 regulator-min-microvol 606 regulator-min-microvolt = <2960000>;
607 regulator-max-microvol 607 regulator-max-microvolt = <2960000>;
608 regulator-system-load 608 regulator-system-load = <10000>;
609 regulator-allow-set-lo 609 regulator-allow-set-load;
610 }; 610 };
611 611
612 vreg_l21a_2p95: l21 { 612 vreg_l21a_2p95: l21 {
613 regulator-min-microvol 613 regulator-min-microvolt = <2960000>;
614 regulator-max-microvol 614 regulator-max-microvolt = <2960000>;
615 regulator-system-load 615 regulator-system-load = <800000>;
616 regulator-allow-set-lo 616 regulator-allow-set-load;
617 }; 617 };
618 618
619 vreg_l22a_2p85: l22 { }; 619 vreg_l22a_2p85: l22 { };
620 620
621 vreg_l23a_3p3: l23 { 621 vreg_l23a_3p3: l23 {
622 regulator-min-microvol 622 regulator-min-microvolt = <3312000>;
623 regulator-max-microvol 623 regulator-max-microvolt = <3312000>;
624 }; 624 };
625 625
626 vreg_l24a_3p075: l24 { 626 vreg_l24a_3p075: l24 {
627 regulator-min-microvol 627 regulator-min-microvolt = <3088000>;
628 regulator-max-microvol 628 regulator-max-microvolt = <3088000>;
629 }; 629 };
630 630
631 vreg_l25a_3p3: l25 { 631 vreg_l25a_3p3: l25 {
632 regulator-min-microvol 632 regulator-min-microvolt = <3104000>;
633 regulator-max-microvol 633 regulator-max-microvolt = <3312000>;
634 }; 634 };
635 635
636 vreg_l26a_1p2: l26 { 636 vreg_l26a_1p2: l26 {
637 regulator-min-microvol 637 regulator-min-microvolt = <1200000>;
638 regulator-max-microvol 638 regulator-max-microvolt = <1200000>;
639 regulator-allow-set-lo 639 regulator-allow-set-load;
640 }; 640 };
641 641
642 vreg_l28_3p0: l28 { 642 vreg_l28_3p0: l28 {
643 regulator-min-microvol 643 regulator-min-microvolt = <3000000>;
644 regulator-max-microvol 644 regulator-max-microvolt = <3000000>;
645 }; 645 };
646 646
647 vreg_lvs1a_1p8: lvs1 { }; 647 vreg_lvs1a_1p8: lvs1 { };
648 648
649 vreg_lvs2a_1p8: lvs2 { }; 649 vreg_lvs2a_1p8: lvs2 { };
650 }; 650 };
651 651
652 regulators-1 { 652 regulators-1 {
653 compatible = "qcom,rpm-pmi8998 653 compatible = "qcom,rpm-pmi8998-regulators";
654 654
655 vdd_bob-supply = <&vph_pwr>; 655 vdd_bob-supply = <&vph_pwr>;
656 656
657 vreg_bob: bob { 657 vreg_bob: bob {
658 regulator-min-microvol 658 regulator-min-microvolt = <3312000>;
659 regulator-max-microvol 659 regulator-max-microvolt = <3600000>;
660 }; 660 };
661 }; 661 };
662 }; 662 };
663 663
664 &sdhc2 { 664 &sdhc2 {
665 status = "okay"; 665 status = "okay";
666 cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH> 666 cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
667 667
668 vmmc-supply = <&vreg_l21a_2p95>; 668 vmmc-supply = <&vreg_l21a_2p95>;
669 vqmmc-supply = <&vreg_l13a_2p95>; 669 vqmmc-supply = <&vreg_l13a_2p95>;
670 670
671 pinctrl-names = "default", "sleep"; 671 pinctrl-names = "default", "sleep";
672 pinctrl-0 = <&sdc2_on &sdc2_cd>; 672 pinctrl-0 = <&sdc2_on &sdc2_cd>;
673 pinctrl-1 = <&sdc2_off &sdc2_cd>; 673 pinctrl-1 = <&sdc2_off &sdc2_cd>;
674 }; 674 };
675 675
676 &tlmm { 676 &tlmm {
677 gpio-reserved-ranges = <0 4>, <81 4>; 677 gpio-reserved-ranges = <0 4>, <81 4>;
678 gpio-line-names = "", /* GPIO_0 */ 678 gpio-line-names = "", /* GPIO_0 */
679 "", 679 "",
680 "", 680 "",
681 "", 681 "",
682 "DEBUG_UART_TX", 682 "DEBUG_UART_TX",
683 "DEBUG_UART_RX", 683 "DEBUG_UART_RX",
684 "CAMSENSOR_I2C_SDA", 684 "CAMSENSOR_I2C_SDA",
685 "CAMSENSOR_I2C_SCL", 685 "CAMSENSOR_I2C_SCL",
686 "NC", 686 "NC",
687 "NC", 687 "NC",
688 "MDP_VSYNC_P", /* GP 688 "MDP_VSYNC_P", /* GPIO_10 */
689 "RGBC_IR_INT", 689 "RGBC_IR_INT",
690 "NFC_VEN", 690 "NFC_VEN",
691 "CAM_MCLK0", 691 "CAM_MCLK0",
692 "CAM_MCLK1", 692 "CAM_MCLK1",
693 "NC", 693 "NC",
694 "NC", 694 "NC",
695 "CCI_I2C_SDA0", 695 "CCI_I2C_SDA0",
696 "CCI_I2C_SCL0", 696 "CCI_I2C_SCL0",
697 "CCI_I2C_SDA1", 697 "CCI_I2C_SDA1",
698 "CCI_I2C_SCL1", /* G 698 "CCI_I2C_SCL1", /* GPIO_20 */
699 "MAIN_CAM_PWR_EN", 699 "MAIN_CAM_PWR_EN",
700 "TOF_INT_N", 700 "TOF_INT_N",
701 "NC", 701 "NC",
702 "NC", 702 "NC",
703 "CHAT_CAM_PWR_EN", 703 "CHAT_CAM_PWR_EN",
704 "NC", 704 "NC",
705 "TOF_RESET_N", 705 "TOF_RESET_N",
706 "CAM2_RSTN", 706 "CAM2_RSTN",
707 "NC", 707 "NC",
708 "CAM1_RSTN", /* GPIO 708 "CAM1_RSTN", /* GPIO_30 */
709 "NC", 709 "NC",
710 "NC", 710 "NC",
711 "NC", 711 "NC",
712 "NC", 712 "NC",
713 "NC", 713 "NC",
714 "NC", 714 "NC",
715 "NC", 715 "NC",
716 "CC_DIR", 716 "CC_DIR",
717 "UIM2_DETECT_EN", 717 "UIM2_DETECT_EN",
718 "FP_RESET_N", /* GPI 718 "FP_RESET_N", /* GPIO_40 */
719 "NC", 719 "NC",
720 "NC", 720 "NC",
721 "NC", 721 "NC",
722 "NC", 722 "NC",
723 "BT_HCI_UART_TXD", 723 "BT_HCI_UART_TXD",
724 "BT_HCI_UART_RXD", 724 "BT_HCI_UART_RXD",
725 "BT_HCI_UART_CTS_N", 725 "BT_HCI_UART_CTS_N",
726 "BT_HCI_UART_RFR_N", 726 "BT_HCI_UART_RFR_N",
727 "NC", 727 "NC",
728 "NC", /* GPIO_50 */ 728 "NC", /* GPIO_50 */
729 "NC", 729 "NC",
730 "NC", 730 "NC",
731 "CODEC_INT2_N", 731 "CODEC_INT2_N",
732 "CODEC_INT1_N", 732 "CODEC_INT1_N",
733 "APPS_I2C_SDA", 733 "APPS_I2C_SDA",
734 "APPS_I2C_SCL", 734 "APPS_I2C_SCL",
735 "FORCED_USB_BOOT", 735 "FORCED_USB_BOOT",
736 "NC", 736 "NC",
737 "NC", 737 "NC",
738 "NC", /* GPIO_60 */ 738 "NC", /* GPIO_60 */
739 "NC", 739 "NC",
740 "NC", 740 "NC",
741 "TRAY2_DET_DS", 741 "TRAY2_DET_DS",
742 "CODEC_RST_N", 742 "CODEC_RST_N",
743 "WSA_L_EN", 743 "WSA_L_EN",
744 "WSA_R_EN", 744 "WSA_R_EN",
745 "NC", 745 "NC",
746 "NC", 746 "NC",
747 "NC", 747 "NC",
748 "LPASS_SLIMBUS_CLK", 748 "LPASS_SLIMBUS_CLK", /* GPIO_70 */
749 "LPASS_SLIMBUS_DATA0 749 "LPASS_SLIMBUS_DATA0",
750 "LPASS_SLIMBUS_DATA1 750 "LPASS_SLIMBUS_DATA1",
751 "BT_FM_SLIMBUS_DATA" 751 "BT_FM_SLIMBUS_DATA",
752 "BT_FM_SLIMBUS_CLK", 752 "BT_FM_SLIMBUS_CLK",
753 "NC", 753 "NC",
754 "RF_LCD_ID_EN", 754 "RF_LCD_ID_EN",
755 "NC", 755 "NC",
756 "NC", 756 "NC",
757 "NC", 757 "NC",
758 "NC", /* GPIO_80 */ 758 "NC", /* GPIO_80 */
759 "SW_SERVICE", 759 "SW_SERVICE",
760 "TX_GTR_THRES_IN", 760 "TX_GTR_THRES_IN",
761 "HW_ID0", 761 "HW_ID0",
762 "HW_ID1", 762 "HW_ID1",
763 "NC", 763 "NC",
764 "NC", 764 "NC",
765 "TS_I2C_SDA", 765 "TS_I2C_SDA",
766 "TS_I2C_SCL", 766 "TS_I2C_SCL",
767 "TS_RESET_N", 767 "TS_RESET_N",
768 "NC", /* GPIO_90 */ 768 "NC", /* GPIO_90 */
769 "NC", 769 "NC",
770 "NFC_IRQ", 770 "NFC_IRQ",
771 "NFC_DWLD_EN", 771 "NFC_DWLD_EN",
772 "DISP_RESET_N", 772 "DISP_RESET_N",
773 "TRAY2_DET", 773 "TRAY2_DET",
774 "CAM_SOF", 774 "CAM_SOF",
775 "RFFE6_CLK", 775 "RFFE6_CLK",
776 "RFFE6_DATA", 776 "RFFE6_DATA",
777 "DEBUG_GPIO0", 777 "DEBUG_GPIO0",
778 "DEBUG_GPIO1", /* GP 778 "DEBUG_GPIO1", /* GPIO_100 */
779 "GRFC4", 779 "GRFC4",
780 "NC", 780 "NC",
781 "NC", 781 "NC",
782 "RSVD", 782 "RSVD",
783 "UIM2_DATA", 783 "UIM2_DATA",
784 "UIM2_CLK", 784 "UIM2_CLK",
785 "UIM2_RESET", 785 "UIM2_RESET",
786 "UIM2_PRESENT", 786 "UIM2_PRESENT",
787 "UIM1_DATA", 787 "UIM1_DATA",
788 "UIM1_CLK", /* GPIO_ 788 "UIM1_CLK", /* GPIO_110 */
789 "UIM1_RST", 789 "UIM1_RST",
790 "UIM1_PRESENT", 790 "UIM1_PRESENT",
791 "UIM_BATT_ALARM", 791 "UIM_BATT_ALARM",
792 "RSVD", 792 "RSVD",
793 "NC", 793 "NC",
794 "NC", 794 "NC",
795 "ACCEL_INT", 795 "ACCEL_INT",
796 "GYRO_INT", 796 "GYRO_INT",
797 "COMPASS_INT", 797 "COMPASS_INT",
798 "ALS_PROX_INT_N", /* 798 "ALS_PROX_INT_N", /* GPIO_120 */
799 "FP_INT_N", 799 "FP_INT_N",
800 "NC", 800 "NC",
801 "BAROMETER_INT", 801 "BAROMETER_INT",
802 "ACC_COVER_OPEN", 802 "ACC_COVER_OPEN",
803 "TS_INT_N", 803 "TS_INT_N",
804 "NC", 804 "NC",
805 "NC", 805 "NC",
806 "USB_DETECT_EN", 806 "USB_DETECT_EN",
807 "NC", 807 "NC",
808 "QLINK_REQUEST", /* 808 "QLINK_REQUEST", /* GPIO_130 */
809 "QLINK_ENABLE", 809 "QLINK_ENABLE",
810 "NC", 810 "NC",
811 "NC", 811 "NC",
812 "WMSS_RESET_N", 812 "WMSS_RESET_N",
813 "PA_INDICATOR_OR", 813 "PA_INDICATOR_OR",
814 "NC", 814 "NC",
815 "RFFE3_DATA", 815 "RFFE3_DATA",
816 "RFFE3_CLK", 816 "RFFE3_CLK",
817 "RFFE4_DATA", 817 "RFFE4_DATA",
818 "RFFE4_CLK", /* GPIO 818 "RFFE4_CLK", /* GPIO_140 */
819 "RFFE5_DATA", 819 "RFFE5_DATA",
820 "RFFE5_CLK", 820 "RFFE5_CLK",
821 "GNSS_EN", 821 "GNSS_EN",
822 "MSS_LTE_COXM_TXD", 822 "MSS_LTE_COXM_TXD",
823 "MSS_LTE_COXM_RXD", 823 "MSS_LTE_COXM_RXD",
824 "RFFE2_DATA", 824 "RFFE2_DATA",
825 "RFFE2_CLK", 825 "RFFE2_CLK",
826 "RFFE1_DATA", 826 "RFFE1_DATA",
827 "RFFE1_CLK"; 827 "RFFE1_CLK";
828 828
829 mdp_vsync_p: mdp-vsync-p-state { 829 mdp_vsync_p: mdp-vsync-p-state {
830 pins = "gpio10"; 830 pins = "gpio10";
831 function = "mdp_vsync_a"; 831 function = "mdp_vsync_a";
832 drive-strength = <2>; 832 drive-strength = <2>;
833 bias-pull-down; 833 bias-pull-down;
834 }; 834 };
835 835
836 nfc_ven: nfc-ven-state { 836 nfc_ven: nfc-ven-state {
837 pins = "gpio12"; 837 pins = "gpio12";
838 function = "gpio"; 838 function = "gpio";
839 bias-disable; 839 bias-disable;
840 drive-strength = <2>; 840 drive-strength = <2>;
841 output-low; 841 output-low;
842 }; 842 };
843 843
844 cam_mclk0_active: cam-mclk0-active-sta 844 cam_mclk0_active: cam-mclk0-active-state {
845 pins = "gpio13"; 845 pins = "gpio13";
846 function = "cam_mclk"; 846 function = "cam_mclk";
847 drive-strength = <2>; 847 drive-strength = <2>;
848 bias-disable; 848 bias-disable;
849 }; 849 };
850 850
851 cam_mclk1_active: cam-mclk1-active-sta 851 cam_mclk1_active: cam-mclk1-active-state {
852 pins = "gpio14"; 852 pins = "gpio14";
853 function = "cam_mclk"; 853 function = "cam_mclk";
854 drive-strength = <2>; 854 drive-strength = <2>;
855 bias-disable; 855 bias-disable;
856 }; 856 };
857 857
858 cci0_default: cci0-default-state { 858 cci0_default: cci0-default-state {
859 pins = "gpio18", "gpio19"; 859 pins = "gpio18", "gpio19";
860 function = "cci_i2c"; 860 function = "cci_i2c";
861 bias-disable; 861 bias-disable;
862 drive-strength = <2>; 862 drive-strength = <2>;
863 }; 863 };
864 864
865 cci1_default: cci1-default-state { 865 cci1_default: cci1-default-state {
866 pins = "gpio19", "gpio20"; 866 pins = "gpio19", "gpio20";
867 function = "cci_i2c"; 867 function = "cci_i2c";
868 bias-disable; 868 bias-disable;
869 drive-strength = <2>; 869 drive-strength = <2>;
870 }; 870 };
871 871
872 main_cam_pwr_en: main-cam-pwr-en-defau 872 main_cam_pwr_en: main-cam-pwr-en-default-state {
873 pins = "gpio21"; 873 pins = "gpio21";
874 function = "gpio"; 874 function = "gpio";
875 bias-disable; 875 bias-disable;
876 drive-strength = <2>; 876 drive-strength = <2>;
877 }; 877 };
878 878
879 tof_int_n: tof-int-n-state { 879 tof_int_n: tof-int-n-state {
880 pins = "gpio22"; 880 pins = "gpio22";
881 function = "gpio"; 881 function = "gpio";
882 bias-pull-up; 882 bias-pull-up;
883 drive-strength = <2>; 883 drive-strength = <2>;
884 }; 884 };
885 885
886 chat_cam_pwr_en: chat-cam-pwr-en-defau 886 chat_cam_pwr_en: chat-cam-pwr-en-default-state {
887 pins = "gpio25"; 887 pins = "gpio25";
888 function = "gpio"; 888 function = "gpio";
889 bias-disable; 889 bias-disable;
890 drive-strength = <2>; 890 drive-strength = <2>;
891 }; 891 };
892 892
893 tof_reset: tof-reset-state { 893 tof_reset: tof-reset-state {
894 pins = "gpio27"; 894 pins = "gpio27";
895 function = "gpio"; 895 function = "gpio";
896 bias-disable; 896 bias-disable;
897 drive-strength = <2>; 897 drive-strength = <2>;
898 }; 898 };
899 899
900 cc_dir_default: cc-dir-active-state { 900 cc_dir_default: cc-dir-active-state {
901 pins = "gpio38"; 901 pins = "gpio38";
902 function = "gpio"; 902 function = "gpio";
903 bias-disable; 903 bias-disable;
904 drive-strength = <16>; 904 drive-strength = <16>;
905 }; 905 };
906 906
907 acc_cover_open: acc-cover-open-state { 907 acc_cover_open: acc-cover-open-state {
908 pins = "gpio124"; 908 pins = "gpio124";
909 function = "gpio"; 909 function = "gpio";
910 bias-disable; 910 bias-disable;
911 drive-strength = <2>; 911 drive-strength = <2>;
912 }; 912 };
913 913
914 ts_int_n: ts-int-n-state { 914 ts_int_n: ts-int-n-state {
915 pins = "gpio125"; 915 pins = "gpio125";
916 function = "gpio"; 916 function = "gpio";
917 drive-strength = <8>; 917 drive-strength = <8>;
918 bias-pull-up; 918 bias-pull-up;
919 }; 919 };
920 920
921 usb_detect_en: usb-detect-en-active-st 921 usb_detect_en: usb-detect-en-active-state {
922 pins = "gpio128"; 922 pins = "gpio128";
923 function = "gpio"; 923 function = "gpio";
924 bias-disable; 924 bias-disable;
925 drive-strength = <2>; 925 drive-strength = <2>;
926 output-low; 926 output-low;
927 }; 927 };
928 928
929 ts_vddio_en: ts-vddio-en-default-state 929 ts_vddio_en: ts-vddio-en-default-state {
930 pins = "gpio133"; 930 pins = "gpio133";
931 function = "gpio"; 931 function = "gpio";
932 bias-disable; 932 bias-disable;
933 drive-strength = <2>; 933 drive-strength = <2>;
934 output-low; 934 output-low;
935 }; 935 };
936 }; 936 };
937 937
938 /* 938 /*
939 * WARNING: 939 * WARNING:
940 * Disable UFS until card quirks are in to avo 940 * Disable UFS until card quirks are in to avoid unrecoverable hard-brick
941 * that would happen as soon as the UFS card g 941 * that would happen as soon as the UFS card gets probed as, without the
942 * required quirks, the bootloader will be era 942 * required quirks, the bootloader will be erased right after card probe.
943 */ 943 */
944 &ufshc { 944 &ufshc {
945 status = "disabled"; 945 status = "disabled";
946 }; 946 };
947 947
948 &ufsphy { 948 &ufsphy {
949 status = "disabled"; 949 status = "disabled";
950 }; 950 };
951 951
952 &usb3 { 952 &usb3 {
953 status = "okay"; 953 status = "okay";
954 }; 954 };
955 955
956 &usb3_dwc3 { 956 &usb3_dwc3 {
957 /* Force to peripheral until we have T 957 /* Force to peripheral until we have Type-C hooked up */
958 dr_mode = "peripheral"; 958 dr_mode = "peripheral";
959 extcon = <&extcon_usb>; 959 extcon = <&extcon_usb>;
960 }; 960 };
961 961
962 &usb3phy { 962 &usb3phy {
963 status = "okay"; 963 status = "okay";
964 964
965 vdda-phy-supply = <&vreg_l1a_0p875>; 965 vdda-phy-supply = <&vreg_l1a_0p875>;
966 vdda-pll-supply = <&vreg_l2a_1p2>; 966 vdda-pll-supply = <&vreg_l2a_1p2>;
967 }; 967 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.