1 // SPDX-License-Identifier: GPL-2.0 1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2016, The Linux Foundation. A 2 /* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
3 3
4 #include <dt-bindings/interrupt-controller/arm 4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/clock/qcom,gcc-msm8998.h 5 #include <dt-bindings/clock/qcom,gcc-msm8998.h>
6 #include <dt-bindings/clock/qcom,gpucc-msm8998 <<
7 #include <dt-bindings/clock/qcom,mmcc-msm8998. <<
8 #include <dt-bindings/clock/qcom,rpmcc.h> <<
9 #include <dt-bindings/firmware/qcom,scm.h> <<
10 #include <dt-bindings/power/qcom-rpmpd.h> <<
11 #include <dt-bindings/gpio/gpio.h> <<
12 6
13 / { 7 / {
14 interrupt-parent = <&intc>; 8 interrupt-parent = <&intc>;
15 9
16 qcom,msm-id = <292 0x0>; 10 qcom,msm-id = <292 0x0>;
17 11
18 #address-cells = <2>; 12 #address-cells = <2>;
19 #size-cells = <2>; 13 #size-cells = <2>;
20 14
21 chosen { }; 15 chosen { };
22 16
23 memory@80000000 { !! 17 memory {
24 device_type = "memory"; 18 device_type = "memory";
25 /* We expect the bootloader to 19 /* We expect the bootloader to fill in the reg */
26 reg = <0x0 0x80000000 0x0 0x0> !! 20 reg = <0 0 0 0>;
27 }; 21 };
28 22
29 reserved-memory { 23 reserved-memory {
30 #address-cells = <2>; 24 #address-cells = <2>;
31 #size-cells = <2>; 25 #size-cells = <2>;
32 ranges; 26 ranges;
33 27
34 hyp_mem: memory@85800000 { !! 28 memory@85800000 {
35 reg = <0x0 0x85800000 !! 29 reg = <0x0 0x85800000 0x0 0x800000>;
36 no-map; <<
37 }; <<
38 <<
39 xbl_mem: memory@85e00000 { <<
40 reg = <0x0 0x85e00000 <<
41 no-map; 30 no-map;
42 }; 31 };
43 32
44 smem_mem: smem-mem@86000000 { 33 smem_mem: smem-mem@86000000 {
45 reg = <0x0 0x86000000 34 reg = <0x0 0x86000000 0x0 0x200000>;
46 no-map; 35 no-map;
47 }; 36 };
48 37
49 tz_mem: memory@86200000 { !! 38 memory@86200000 {
50 reg = <0x0 0x86200000 39 reg = <0x0 0x86200000 0x0 0x2d00000>;
51 no-map; 40 no-map;
52 }; 41 };
53 42
54 rmtfs_mem: memory@88f00000 { !! 43 rmtfs {
55 compatible = "qcom,rmt 44 compatible = "qcom,rmtfs-mem";
56 reg = <0x0 0x88f00000 <<
57 no-map; <<
58 <<
59 qcom,client-id = <1>; <<
60 qcom,vmid = <QCOM_SCM_ <<
61 }; <<
62 <<
63 spss_mem: memory@8ab00000 { <<
64 reg = <0x0 0x8ab00000 <<
65 no-map; <<
66 }; <<
67 <<
68 adsp_mem: memory@8b200000 { <<
69 reg = <0x0 0x8b200000 <<
70 no-map; <<
71 }; <<
72 <<
73 mpss_mem: memory@8cc00000 { <<
74 reg = <0x0 0x8cc00000 <<
75 no-map; <<
76 }; <<
77 <<
78 venus_mem: memory@93c00000 { <<
79 reg = <0x0 0x93c00000 <<
80 no-map; <<
81 }; <<
82 <<
83 mba_mem: memory@94100000 { <<
84 reg = <0x0 0x94100000 <<
85 no-map; <<
86 }; <<
87 <<
88 slpi_mem: memory@94300000 { <<
89 reg = <0x0 0x94300000 <<
90 no-map; <<
91 }; <<
92 <<
93 ipa_fw_mem: memory@95200000 { <<
94 reg = <0x0 0x95200000 <<
95 no-map; <<
96 }; <<
97 <<
98 ipa_gsi_mem: memory@95210000 { <<
99 reg = <0x0 0x95210000 <<
100 no-map; <<
101 }; <<
102 <<
103 gpu_mem: memory@95600000 { <<
104 reg = <0x0 0x95600000 <<
105 no-map; <<
106 }; <<
107 45
108 wlan_msa_mem: memory@95700000 !! 46 size = <0x0 0x200000>;
109 reg = <0x0 0x95700000 !! 47 alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
110 no-map; 48 no-map;
111 }; <<
112 49
113 mdata_mem: mpss-metadata { !! 50 qcom,client-id = <1>;
114 alloc-ranges = <0x0 0x !! 51 qcom,vmid = <15>;
115 size = <0x0 0x4000>; <<
116 no-map; <<
117 }; 52 };
118 }; 53 };
119 54
120 clocks { 55 clocks {
121 xo: xo-board { !! 56 xo_board {
122 compatible = "fixed-cl 57 compatible = "fixed-clock";
123 #clock-cells = <0>; 58 #clock-cells = <0>;
124 clock-frequency = <192 59 clock-frequency = <19200000>;
125 clock-output-names = " <<
126 }; 60 };
127 61
128 sleep_clk: sleep-clk { !! 62 sleep_clk {
129 compatible = "fixed-cl 63 compatible = "fixed-clock";
130 #clock-cells = <0>; 64 #clock-cells = <0>;
131 clock-frequency = <327 65 clock-frequency = <32764>;
132 }; 66 };
133 }; 67 };
134 68
135 cpus { 69 cpus {
136 #address-cells = <2>; 70 #address-cells = <2>;
137 #size-cells = <0>; 71 #size-cells = <0>;
138 72
139 CPU0: cpu@0 { 73 CPU0: cpu@0 {
140 device_type = "cpu"; 74 device_type = "cpu";
141 compatible = "qcom,kry !! 75 compatible = "arm,armv8";
142 reg = <0x0 0x0>; 76 reg = <0x0 0x0>;
143 enable-method = "psci" 77 enable-method = "psci";
144 capacity-dmips-mhz = < !! 78 efficiency = <1024>;
145 cpu-idle-states = <&LI <<
146 next-level-cache = <&L 79 next-level-cache = <&L2_0>;
147 L2_0: l2-cache { 80 L2_0: l2-cache {
148 compatible = " !! 81 compatible = "arm,arch-cache";
149 cache-level = 82 cache-level = <2>;
150 cache-unified; !! 83 };
>> 84 L1_I_0: l1-icache {
>> 85 compatible = "arm,arch-cache";
>> 86 };
>> 87 L1_D_0: l1-dcache {
>> 88 compatible = "arm,arch-cache";
151 }; 89 };
152 }; 90 };
153 91
154 CPU1: cpu@1 { 92 CPU1: cpu@1 {
155 device_type = "cpu"; 93 device_type = "cpu";
156 compatible = "qcom,kry !! 94 compatible = "arm,armv8";
157 reg = <0x0 0x1>; 95 reg = <0x0 0x1>;
158 enable-method = "psci" 96 enable-method = "psci";
159 capacity-dmips-mhz = < !! 97 efficiency = <1024>;
160 cpu-idle-states = <&LI <<
161 next-level-cache = <&L 98 next-level-cache = <&L2_0>;
>> 99 L1_I_1: l1-icache {
>> 100 compatible = "arm,arch-cache";
>> 101 };
>> 102 L1_D_1: l1-dcache {
>> 103 compatible = "arm,arch-cache";
>> 104 };
162 }; 105 };
163 106
164 CPU2: cpu@2 { 107 CPU2: cpu@2 {
165 device_type = "cpu"; 108 device_type = "cpu";
166 compatible = "qcom,kry !! 109 compatible = "arm,armv8";
167 reg = <0x0 0x2>; 110 reg = <0x0 0x2>;
168 enable-method = "psci" 111 enable-method = "psci";
169 capacity-dmips-mhz = < !! 112 efficiency = <1024>;
170 cpu-idle-states = <&LI <<
171 next-level-cache = <&L 113 next-level-cache = <&L2_0>;
>> 114 L1_I_2: l1-icache {
>> 115 compatible = "arm,arch-cache";
>> 116 };
>> 117 L1_D_2: l1-dcache {
>> 118 compatible = "arm,arch-cache";
>> 119 };
172 }; 120 };
173 121
174 CPU3: cpu@3 { 122 CPU3: cpu@3 {
175 device_type = "cpu"; 123 device_type = "cpu";
176 compatible = "qcom,kry !! 124 compatible = "arm,armv8";
177 reg = <0x0 0x3>; 125 reg = <0x0 0x3>;
178 enable-method = "psci" 126 enable-method = "psci";
179 capacity-dmips-mhz = < !! 127 efficiency = <1024>;
180 cpu-idle-states = <&LI <<
181 next-level-cache = <&L 128 next-level-cache = <&L2_0>;
>> 129 L1_I_3: l1-icache {
>> 130 compatible = "arm,arch-cache";
>> 131 };
>> 132 L1_D_3: l1-dcache {
>> 133 compatible = "arm,arch-cache";
>> 134 };
182 }; 135 };
183 136
184 CPU4: cpu@100 { 137 CPU4: cpu@100 {
185 device_type = "cpu"; 138 device_type = "cpu";
186 compatible = "qcom,kry !! 139 compatible = "arm,armv8";
187 reg = <0x0 0x100>; 140 reg = <0x0 0x100>;
188 enable-method = "psci" 141 enable-method = "psci";
189 capacity-dmips-mhz = < !! 142 efficiency = <1536>;
190 cpu-idle-states = <&BI <<
191 next-level-cache = <&L 143 next-level-cache = <&L2_1>;
192 L2_1: l2-cache { 144 L2_1: l2-cache {
193 compatible = " !! 145 compatible = "arm,arch-cache";
194 cache-level = 146 cache-level = <2>;
195 cache-unified; !! 147 };
>> 148 L1_I_100: l1-icache {
>> 149 compatible = "arm,arch-cache";
>> 150 };
>> 151 L1_D_100: l1-dcache {
>> 152 compatible = "arm,arch-cache";
196 }; 153 };
197 }; 154 };
198 155
199 CPU5: cpu@101 { 156 CPU5: cpu@101 {
200 device_type = "cpu"; 157 device_type = "cpu";
201 compatible = "qcom,kry !! 158 compatible = "arm,armv8";
202 reg = <0x0 0x101>; 159 reg = <0x0 0x101>;
203 enable-method = "psci" 160 enable-method = "psci";
204 capacity-dmips-mhz = < !! 161 efficiency = <1536>;
205 cpu-idle-states = <&BI <<
206 next-level-cache = <&L 162 next-level-cache = <&L2_1>;
>> 163 L1_I_101: l1-icache {
>> 164 compatible = "arm,arch-cache";
>> 165 };
>> 166 L1_D_101: l1-dcache {
>> 167 compatible = "arm,arch-cache";
>> 168 };
207 }; 169 };
208 170
209 CPU6: cpu@102 { 171 CPU6: cpu@102 {
210 device_type = "cpu"; 172 device_type = "cpu";
211 compatible = "qcom,kry !! 173 compatible = "arm,armv8";
212 reg = <0x0 0x102>; 174 reg = <0x0 0x102>;
213 enable-method = "psci" 175 enable-method = "psci";
214 capacity-dmips-mhz = < !! 176 efficiency = <1536>;
215 cpu-idle-states = <&BI <<
216 next-level-cache = <&L 177 next-level-cache = <&L2_1>;
>> 178 L1_I_102: l1-icache {
>> 179 compatible = "arm,arch-cache";
>> 180 };
>> 181 L1_D_102: l1-dcache {
>> 182 compatible = "arm,arch-cache";
>> 183 };
217 }; 184 };
218 185
219 CPU7: cpu@103 { 186 CPU7: cpu@103 {
220 device_type = "cpu"; 187 device_type = "cpu";
221 compatible = "qcom,kry !! 188 compatible = "arm,armv8";
222 reg = <0x0 0x103>; 189 reg = <0x0 0x103>;
223 enable-method = "psci" 190 enable-method = "psci";
224 capacity-dmips-mhz = < !! 191 efficiency = <1536>;
225 cpu-idle-states = <&BI <<
226 next-level-cache = <&L 192 next-level-cache = <&L2_1>;
>> 193 L1_I_103: l1-icache {
>> 194 compatible = "arm,arch-cache";
>> 195 };
>> 196 L1_D_103: l1-dcache {
>> 197 compatible = "arm,arch-cache";
>> 198 };
227 }; 199 };
228 200
229 cpu-map { 201 cpu-map {
230 cluster0 { 202 cluster0 {
231 core0 { 203 core0 {
232 cpu = 204 cpu = <&CPU0>;
233 }; 205 };
234 206
235 core1 { 207 core1 {
236 cpu = 208 cpu = <&CPU1>;
237 }; 209 };
238 210
239 core2 { 211 core2 {
240 cpu = 212 cpu = <&CPU2>;
241 }; 213 };
242 214
243 core3 { 215 core3 {
244 cpu = 216 cpu = <&CPU3>;
245 }; 217 };
246 }; 218 };
247 219
248 cluster1 { 220 cluster1 {
249 core0 { 221 core0 {
250 cpu = 222 cpu = <&CPU4>;
251 }; 223 };
252 224
253 core1 { 225 core1 {
254 cpu = 226 cpu = <&CPU5>;
255 }; 227 };
256 228
257 core2 { 229 core2 {
258 cpu = 230 cpu = <&CPU6>;
259 }; 231 };
260 232
261 core3 { 233 core3 {
262 cpu = 234 cpu = <&CPU7>;
263 }; 235 };
264 }; 236 };
265 }; 237 };
266 <<
267 idle-states { <<
268 entry-method = "psci"; <<
269 <<
270 LITTLE_CPU_SLEEP_0: cp <<
271 compatible = " <<
272 idle-state-nam <<
273 /* CPU Retenti <<
274 arm,psci-suspe <<
275 entry-latency- <<
276 exit-latency-u <<
277 min-residency- <<
278 }; <<
279 <<
280 LITTLE_CPU_SLEEP_1: cp <<
281 compatible = " <<
282 idle-state-nam <<
283 /* CPU + L2 Po <<
284 arm,psci-suspe <<
285 entry-latency- <<
286 exit-latency-u <<
287 min-residency- <<
288 local-timer-st <<
289 }; <<
290 <<
291 BIG_CPU_SLEEP_0: cpu-s <<
292 compatible = " <<
293 idle-state-nam <<
294 /* CPU Retenti <<
295 arm,psci-suspe <<
296 entry-latency- <<
297 exit-latency-u <<
298 min-residency- <<
299 }; <<
300 <<
301 BIG_CPU_SLEEP_1: cpu-s <<
302 compatible = " <<
303 idle-state-nam <<
304 /* CPU + L2 Po <<
305 arm,psci-suspe <<
306 entry-latency- <<
307 exit-latency-u <<
308 min-residency- <<
309 local-timer-st <<
310 }; <<
311 }; <<
312 }; 238 };
313 239
314 firmware { 240 firmware {
315 scm { 241 scm {
316 compatible = "qcom,scm !! 242 compatible = "qcom,scm-msm8998";
317 }; 243 };
318 }; 244 };
319 245
320 dsi_opp_table: opp-table-dsi { !! 246 tcsr_mutex: hwlock {
321 compatible = "operating-points !! 247 compatible = "qcom,tcsr-mutex";
322 !! 248 syscon = <&tcsr_mutex_regs 0 0x1000>;
323 opp-131250000 { !! 249 #hwlock-cells = <1>;
324 opp-hz = /bits/ 64 <13 <<
325 required-opps = <&rpmp <<
326 }; <<
327 <<
328 opp-210000000 { <<
329 opp-hz = /bits/ 64 <21 <<
330 required-opps = <&rpmp <<
331 }; <<
332 <<
333 opp-312500000 { <<
334 opp-hz = /bits/ 64 <31 <<
335 required-opps = <&rpmp <<
336 }; <<
337 }; 250 };
338 251
339 psci { 252 psci {
340 compatible = "arm,psci-1.0"; 253 compatible = "arm,psci-1.0";
341 method = "smc"; 254 method = "smc";
342 }; 255 };
343 256
344 rpm: remoteproc { !! 257 rpm-glink {
345 compatible = "qcom,msm8998-rpm !! 258 compatible = "qcom,glink-rpm";
346 259
347 glink-edge { !! 260 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
348 compatible = "qcom,gli !! 261 qcom,rpm-msg-ram = <&rpm_msg_ram>;
349 !! 262 mboxes = <&apcs_glb 0>;
350 interrupts = <GIC_SPI !! 263
351 qcom,rpm-msg-ram = <&r !! 264 rpm_requests: rpm-requests {
352 mboxes = <&apcs_glb 0> !! 265 compatible = "qcom,rpm-msm8998";
353 !! 266 qcom,glink-channels = "rpm_requests";
354 rpm_requests: rpm-requ <<
355 compatible = " <<
356 qcom,glink-cha <<
357 <<
358 rpmcc: clock-c <<
359 compat <<
360 clocks <<
361 clock- <<
362 #clock <<
363 }; <<
364 <<
365 rpmpd: power-c <<
366 compat <<
367 #power <<
368 operat <<
369 <<
370 rpmpd_ <<
371 <<
372 <<
373 <<
374 <<
375 <<
376 <<
377 <<
378 <<
379 <<
380 <<
381 <<
382 <<
383 <<
384 <<
385 <<
386 <<
387 <<
388 <<
389 <<
390 <<
391 <<
392 <<
393 <<
394 <<
395 <<
396 <<
397 <<
398 <<
399 <<
400 <<
401 <<
402 <<
403 <<
404 <<
405 <<
406 <<
407 <<
408 <<
409 <<
410 <<
411 <<
412 }; <<
413 }; <<
414 }; <<
415 }; 267 };
416 }; 268 };
417 269
418 smem { 270 smem {
419 compatible = "qcom,smem"; 271 compatible = "qcom,smem";
420 memory-region = <&smem_mem>; 272 memory-region = <&smem_mem>;
421 hwlocks = <&tcsr_mutex 3>; 273 hwlocks = <&tcsr_mutex 3>;
422 }; 274 };
423 275
424 smp2p-lpass { 276 smp2p-lpass {
425 compatible = "qcom,smp2p"; 277 compatible = "qcom,smp2p";
426 qcom,smem = <443>, <429>; 278 qcom,smem = <443>, <429>;
427 279
428 interrupts = <GIC_SPI 158 IRQ_ 280 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
429 281
430 mboxes = <&apcs_glb 10>; 282 mboxes = <&apcs_glb 10>;
431 283
432 qcom,local-pid = <0>; 284 qcom,local-pid = <0>;
433 qcom,remote-pid = <2>; 285 qcom,remote-pid = <2>;
434 286
435 adsp_smp2p_out: master-kernel 287 adsp_smp2p_out: master-kernel {
436 qcom,entry-name = "mas 288 qcom,entry-name = "master-kernel";
437 #qcom,smem-state-cells 289 #qcom,smem-state-cells = <1>;
438 }; 290 };
439 291
440 adsp_smp2p_in: slave-kernel { 292 adsp_smp2p_in: slave-kernel {
441 qcom,entry-name = "sla 293 qcom,entry-name = "slave-kernel";
442 294
443 interrupt-controller; 295 interrupt-controller;
444 #interrupt-cells = <2> 296 #interrupt-cells = <2>;
445 }; 297 };
446 }; 298 };
447 299
448 smp2p-mpss { 300 smp2p-mpss {
449 compatible = "qcom,smp2p"; 301 compatible = "qcom,smp2p";
450 qcom,smem = <435>, <428>; 302 qcom,smem = <435>, <428>;
451 interrupts = <GIC_SPI 451 IRQ_ 303 interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
452 mboxes = <&apcs_glb 14>; 304 mboxes = <&apcs_glb 14>;
453 qcom,local-pid = <0>; 305 qcom,local-pid = <0>;
454 qcom,remote-pid = <1>; 306 qcom,remote-pid = <1>;
455 307
456 modem_smp2p_out: master-kernel 308 modem_smp2p_out: master-kernel {
457 qcom,entry-name = "mas 309 qcom,entry-name = "master-kernel";
458 #qcom,smem-state-cells 310 #qcom,smem-state-cells = <1>;
459 }; 311 };
460 312
461 modem_smp2p_in: slave-kernel { 313 modem_smp2p_in: slave-kernel {
462 qcom,entry-name = "sla 314 qcom,entry-name = "slave-kernel";
463 interrupt-controller; 315 interrupt-controller;
464 #interrupt-cells = <2> 316 #interrupt-cells = <2>;
465 }; 317 };
466 }; 318 };
467 319
468 smp2p-slpi { 320 smp2p-slpi {
469 compatible = "qcom,smp2p"; 321 compatible = "qcom,smp2p";
470 qcom,smem = <481>, <430>; 322 qcom,smem = <481>, <430>;
471 interrupts = <GIC_SPI 178 IRQ_ 323 interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
472 mboxes = <&apcs_glb 26>; 324 mboxes = <&apcs_glb 26>;
473 qcom,local-pid = <0>; 325 qcom,local-pid = <0>;
474 qcom,remote-pid = <3>; 326 qcom,remote-pid = <3>;
475 327
476 slpi_smp2p_out: master-kernel 328 slpi_smp2p_out: master-kernel {
477 qcom,entry-name = "mas 329 qcom,entry-name = "master-kernel";
478 #qcom,smem-state-cells 330 #qcom,smem-state-cells = <1>;
479 }; 331 };
480 332
481 slpi_smp2p_in: slave-kernel { 333 slpi_smp2p_in: slave-kernel {
482 qcom,entry-name = "sla 334 qcom,entry-name = "slave-kernel";
483 interrupt-controller; 335 interrupt-controller;
484 #interrupt-cells = <2> 336 #interrupt-cells = <2>;
485 }; 337 };
486 }; 338 };
487 339
488 thermal-zones { 340 thermal-zones {
489 cpu0-thermal { !! 341 cpu-thermal0 {
490 polling-delay-passive 342 polling-delay-passive = <250>;
>> 343 polling-delay = <1000>;
491 344
492 thermal-sensors = <&ts !! 345 thermal-sensors = <&tsens0 6>;
493 346
494 trips { 347 trips {
495 cpu0_alert0: t !! 348 cpu_alert0: trip0 {
496 temper 349 temperature = <75000>;
497 hyster 350 hysteresis = <2000>;
498 type = 351 type = "passive";
499 }; 352 };
500 353
501 cpu0_crit: cpu !! 354 cpu_crit0: trip1 {
502 temper 355 temperature = <110000>;
503 hyster 356 hysteresis = <2000>;
504 type = 357 type = "critical";
505 }; 358 };
506 }; 359 };
507 }; 360 };
508 361
509 cpu1-thermal { !! 362 cpu-thermal1 {
510 polling-delay-passive 363 polling-delay-passive = <250>;
>> 364 polling-delay = <1000>;
511 365
512 thermal-sensors = <&ts !! 366 thermal-sensors = <&tsens0 7>;
513 367
514 trips { 368 trips {
515 cpu1_alert0: t !! 369 cpu_alert1: trip0 {
516 temper 370 temperature = <75000>;
517 hyster 371 hysteresis = <2000>;
518 type = 372 type = "passive";
519 }; 373 };
520 374
521 cpu1_crit: cpu !! 375 cpu_crit1: trip1 {
522 temper 376 temperature = <110000>;
523 hyster 377 hysteresis = <2000>;
524 type = 378 type = "critical";
525 }; 379 };
526 }; 380 };
527 }; 381 };
528 382
529 cpu2-thermal { !! 383 cpu-thermal2 {
530 polling-delay-passive 384 polling-delay-passive = <250>;
>> 385 polling-delay = <1000>;
531 386
532 thermal-sensors = <&ts !! 387 thermal-sensors = <&tsens0 8>;
533 388
534 trips { 389 trips {
535 cpu2_alert0: t !! 390 cpu_alert2: trip0 {
536 temper 391 temperature = <75000>;
537 hyster 392 hysteresis = <2000>;
538 type = 393 type = "passive";
539 }; 394 };
540 395
541 cpu2_crit: cpu !! 396 cpu_crit2: trip1 {
542 temper 397 temperature = <110000>;
543 hyster 398 hysteresis = <2000>;
544 type = 399 type = "critical";
545 }; 400 };
546 }; 401 };
547 }; 402 };
548 403
549 cpu3-thermal { !! 404 cpu-thermal3 {
550 polling-delay-passive 405 polling-delay-passive = <250>;
>> 406 polling-delay = <1000>;
551 407
552 thermal-sensors = <&ts !! 408 thermal-sensors = <&tsens0 9>;
553 409
554 trips { 410 trips {
555 cpu3_alert0: t !! 411 cpu_alert3: trip0 {
556 temper 412 temperature = <75000>;
557 hyster 413 hysteresis = <2000>;
558 type = 414 type = "passive";
559 }; 415 };
560 416
561 cpu3_crit: cpu !! 417 cpu_crit3: trip1 {
562 temper 418 temperature = <110000>;
563 hyster 419 hysteresis = <2000>;
564 type = 420 type = "critical";
565 }; 421 };
566 }; 422 };
567 }; 423 };
568 424
569 cpu4-thermal { !! 425 cpu-thermal4 {
570 polling-delay-passive 426 polling-delay-passive = <250>;
>> 427 polling-delay = <1000>;
571 428
572 thermal-sensors = <&ts !! 429 thermal-sensors = <&tsens0 10>;
573 430
574 trips { 431 trips {
575 cpu4_alert0: t !! 432 cpu_alert4: trip0 {
576 temper 433 temperature = <75000>;
577 hyster 434 hysteresis = <2000>;
578 type = 435 type = "passive";
579 }; 436 };
580 437
581 cpu4_crit: cpu !! 438 cpu_crit4: trip1 {
582 temper 439 temperature = <110000>;
583 hyster 440 hysteresis = <2000>;
584 type = 441 type = "critical";
585 }; 442 };
586 }; 443 };
587 }; 444 };
588 445
589 cpu5-thermal { !! 446 cpu-thermal5 {
590 polling-delay-passive 447 polling-delay-passive = <250>;
>> 448 polling-delay = <1000>;
591 449
592 thermal-sensors = <&ts !! 450 thermal-sensors = <&tsens0 11>;
593 451
594 trips { 452 trips {
595 cpu5_alert0: t !! 453 cpu_alert5: trip0 {
596 temper 454 temperature = <75000>;
597 hyster 455 hysteresis = <2000>;
598 type = 456 type = "passive";
599 }; 457 };
600 458
601 cpu5_crit: cpu !! 459 cpu_crit5: trip1 {
602 temper 460 temperature = <110000>;
603 hyster 461 hysteresis = <2000>;
604 type = 462 type = "critical";
605 }; 463 };
606 }; 464 };
607 }; 465 };
608 466
609 cpu6-thermal { !! 467 cpu-thermal6 {
610 polling-delay-passive 468 polling-delay-passive = <250>;
>> 469 polling-delay = <1000>;
611 470
612 thermal-sensors = <&ts !! 471 thermal-sensors = <&tsens1 0>;
613 472
614 trips { 473 trips {
615 cpu6_alert0: t !! 474 cpu_alert6: trip0 {
616 temper 475 temperature = <75000>;
617 hyster 476 hysteresis = <2000>;
618 type = 477 type = "passive";
619 }; 478 };
620 479
621 cpu6_crit: cpu !! 480 cpu_crit6: trip1 {
622 temper 481 temperature = <110000>;
623 hyster 482 hysteresis = <2000>;
624 type = 483 type = "critical";
625 }; 484 };
626 }; 485 };
627 }; 486 };
628 487
629 cpu7-thermal { !! 488 cpu-thermal7 {
630 polling-delay-passive 489 polling-delay-passive = <250>;
>> 490 polling-delay = <1000>;
631 491
632 thermal-sensors = <&ts !! 492 thermal-sensors = <&tsens1 1>;
633 493
634 trips { 494 trips {
635 cpu7_alert0: t !! 495 cpu_alert7: trip0 {
636 temper 496 temperature = <75000>;
637 hyster 497 hysteresis = <2000>;
638 type = 498 type = "passive";
639 }; 499 };
640 500
641 cpu7_crit: cpu !! 501 cpu_crit7: trip1 {
642 temper 502 temperature = <110000>;
643 hyster 503 hysteresis = <2000>;
644 type = 504 type = "critical";
645 }; 505 };
646 }; 506 };
647 }; 507 };
648 508
649 gpu-bottom-thermal { !! 509 gpu-thermal {
650 polling-delay-passive <<
651 <<
652 thermal-sensors = <&ts <<
653 <<
654 trips { <<
655 gpu1_alert0: t <<
656 temper <<
657 hyster <<
658 type = <<
659 }; <<
660 }; <<
661 }; <<
662 <<
663 gpu-top-thermal { <<
664 polling-delay-passive <<
665 <<
666 thermal-sensors = <&ts <<
667 <<
668 trips { <<
669 gpu2_alert0: t <<
670 temper <<
671 hyster <<
672 type = <<
673 }; <<
674 }; <<
675 }; <<
676 <<
677 clust0-mhm-thermal { <<
678 polling-delay-passive <<
679 <<
680 thermal-sensors = <&ts <<
681 <<
682 trips { <<
683 cluster0_mhm_a <<
684 temper <<
685 hyster <<
686 type = <<
687 }; <<
688 }; <<
689 }; <<
690 <<
691 clust1-mhm-thermal { <<
692 polling-delay-passive <<
693 <<
694 thermal-sensors = <&ts <<
695 <<
696 trips { <<
697 cluster1_mhm_a <<
698 temper <<
699 hyster <<
700 type = <<
701 }; <<
702 }; <<
703 }; <<
704 <<
705 cluster1-l2-thermal { <<
706 polling-delay-passive <<
707 <<
708 thermal-sensors = <&ts <<
709 <<
710 trips { <<
711 cluster1_l2_al <<
712 temper <<
713 hyster <<
714 type = <<
715 }; <<
716 }; <<
717 }; <<
718 <<
719 modem-thermal { <<
720 polling-delay-passive <<
721 <<
722 thermal-sensors = <&ts <<
723 <<
724 trips { <<
725 modem_alert0: <<
726 temper <<
727 hyster <<
728 type = <<
729 }; <<
730 }; <<
731 }; <<
732 <<
733 mem-thermal { <<
734 polling-delay-passive <<
735 <<
736 thermal-sensors = <&ts <<
737 <<
738 trips { <<
739 mem_alert0: tr <<
740 temper <<
741 hyster <<
742 type = <<
743 }; <<
744 }; <<
745 }; <<
746 <<
747 wlan-thermal { <<
748 polling-delay-passive 510 polling-delay-passive = <250>;
>> 511 polling-delay = <1000>;
749 512
750 thermal-sensors = <&ts 513 thermal-sensors = <&tsens1 3>;
751 <<
752 trips { <<
753 wlan_alert0: t <<
754 temper <<
755 hyster <<
756 type = <<
757 }; <<
758 }; <<
759 }; <<
760 <<
761 q6-dsp-thermal { <<
762 polling-delay-passive <<
763 <<
764 thermal-sensors = <&ts <<
765 <<
766 trips { <<
767 q6_dsp_alert0: <<
768 temper <<
769 hyster <<
770 type = <<
771 }; <<
772 }; <<
773 }; <<
774 <<
775 camera-thermal { <<
776 polling-delay-passive <<
777 <<
778 thermal-sensors = <&ts <<
779 <<
780 trips { <<
781 camera_alert0: <<
782 temper <<
783 hyster <<
784 type = <<
785 }; <<
786 }; <<
787 }; <<
788 <<
789 multimedia-thermal { <<
790 polling-delay-passive <<
791 <<
792 thermal-sensors = <&ts <<
793 <<
794 trips { <<
795 multimedia_ale <<
796 temper <<
797 hyster <<
798 type = <<
799 }; <<
800 }; <<
801 }; 514 };
802 }; 515 };
803 516
804 timer { 517 timer {
805 compatible = "arm,armv8-timer" 518 compatible = "arm,armv8-timer";
806 interrupts = <GIC_PPI 1 IRQ_TY 519 interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
807 <GIC_PPI 2 IRQ_TY 520 <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
808 <GIC_PPI 3 IRQ_TY 521 <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
809 <GIC_PPI 0 IRQ_TY 522 <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
810 }; 523 };
811 524
812 soc: soc@0 { !! 525 soc: soc {
813 #address-cells = <1>; 526 #address-cells = <1>;
814 #size-cells = <1>; 527 #size-cells = <1>;
815 ranges = <0 0 0 0xffffffff>; 528 ranges = <0 0 0 0xffffffff>;
816 compatible = "simple-bus"; 529 compatible = "simple-bus";
817 530
818 gcc: clock-controller@100000 { !! 531 rpm_msg_ram: memory@68000 {
819 compatible = "qcom,gcc <<
820 #clock-cells = <1>; <<
821 #reset-cells = <1>; <<
822 #power-domain-cells = <<
823 reg = <0x00100000 0xb0 <<
824 <<
825 clock-names = "xo", "s <<
826 clocks = <&rpmcc RPM_S <<
827 <<
828 /* <<
829 * The hypervisor typi <<
830 * reside as read-only <<
831 * these clocks on a d <<
832 * enabled but unused <<
833 * to reboot. <<
834 * In light of that, w <<
835 * as protected. The b <<
836 * list of protected c <<
837 * desired for the HLO <<
838 */ <<
839 protected-clocks = <AG <<
840 <SS <<
841 <SS <<
842 }; <<
843 <<
844 rpm_msg_ram: sram@778000 { <<
845 compatible = "qcom,rpm 532 compatible = "qcom,rpm-msg-ram";
846 reg = <0x00778000 0x70 !! 533 reg = <0x778000 0x7000>;
847 }; 534 };
848 535
849 qfprom: qfprom@784000 { !! 536 qfprom: qfprom@780000 {
850 compatible = "qcom,msm !! 537 compatible = "qcom,qfprom";
851 reg = <0x00784000 0x62 !! 538 reg = <0x780000 0x621c>;
852 #address-cells = <1>; 539 #address-cells = <1>;
853 #size-cells = <1>; 540 #size-cells = <1>;
854 <<
855 qusb2_hstx_trim: hstx- <<
856 reg = <0x23a 0 <<
857 bits = <0 4>; <<
858 }; <<
859 }; 541 };
860 542
861 tsens0: thermal@10ab000 { !! 543 gcc: clock-controller@100000 {
862 compatible = "qcom,msm !! 544 compatible = "qcom,gcc-msm8998";
863 reg = <0x010ab000 0x10 !! 545 #clock-cells = <1>;
864 <0x010aa000 0x10 <<
865 #qcom,sensors = <14>; <<
866 interrupts = <GIC_SPI <<
867 <GIC_SPI <<
868 interrupt-names = "upl <<
869 #thermal-sensor-cells <<
870 }; <<
871 <<
872 tsens1: thermal@10ae000 { <<
873 compatible = "qcom,msm <<
874 reg = <0x010ae000 0x10 <<
875 <0x010ad000 0x10 <<
876 #qcom,sensors = <8>; <<
877 interrupts = <GIC_SPI <<
878 <GIC_SPI <<
879 interrupt-names = "upl <<
880 #thermal-sensor-cells <<
881 }; <<
882 <<
883 anoc1_smmu: iommu@1680000 { <<
884 compatible = "qcom,msm <<
885 reg = <0x01680000 0x10 <<
886 #iommu-cells = <1>; <<
887 <<
888 #global-interrupts = < <<
889 interrupts = <<
890 <GIC_SPI 364 I <<
891 <GIC_SPI 365 I <<
892 <GIC_SPI 366 I <<
893 <GIC_SPI 367 I <<
894 <GIC_SPI 368 I <<
895 <GIC_SPI 369 I <<
896 }; <<
897 <<
898 anoc2_smmu: iommu@16c0000 { <<
899 compatible = "qcom,msm <<
900 reg = <0x016c0000 0x40 <<
901 #iommu-cells = <1>; <<
902 <<
903 #global-interrupts = < <<
904 interrupts = <<
905 <GIC_SPI 373 I <<
906 <GIC_SPI 374 I <<
907 <GIC_SPI 375 I <<
908 <GIC_SPI 376 I <<
909 <GIC_SPI 377 I <<
910 <GIC_SPI 378 I <<
911 <GIC_SPI 462 I <<
912 <GIC_SPI 463 I <<
913 <GIC_SPI 464 I <<
914 <GIC_SPI 465 I <<
915 }; <<
916 <<
917 pcie0: pcie@1c00000 { <<
918 compatible = "qcom,pci <<
919 reg = <0x01c00000 0x20 <<
920 <0x1b000000 0xf1 <<
921 <0x1b000f20 0xa8 <<
922 <0x1b100000 0x10 <<
923 reg-names = "parf", "d <<
924 device_type = "pci"; <<
925 linux,pci-domain = <0> <<
926 bus-range = <0x00 0xff <<
927 #address-cells = <3>; <<
928 #size-cells = <2>; <<
929 num-lanes = <1>; <<
930 phys = <&pcie_phy>; <<
931 phy-names = "pciephy"; <<
932 status = "disabled"; <<
933 <<
934 ranges = <0x01000000 0 <<
935 <0x02000000 0 <<
936 <<
937 #interrupt-cells = <1> <<
938 interrupts = <GIC_SPI <<
939 interrupt-names = "msi <<
940 interrupt-map-mask = < <<
941 interrupt-map = <0 0 0 <<
942 <0 0 0 <<
943 <0 0 0 <<
944 <0 0 0 <<
945 <<
946 clocks = <&gcc GCC_PCI <<
947 <&gcc GCC_PCI <<
948 <&gcc GCC_PCI <<
949 <&gcc GCC_PCI <<
950 <&gcc GCC_PCI <<
951 clock-names = "pipe", <<
952 <<
953 power-domains = <&gcc <<
954 iommu-map = <0x100 &an <<
955 perst-gpios = <&tlmm 3 <<
956 <<
957 pcie@0 { <<
958 device_type = <<
959 reg = <0x0 0x0 <<
960 bus-range = <0 <<
961 <<
962 #address-cells <<
963 #size-cells = <<
964 ranges; <<
965 }; <<
966 }; <<
967 <<
968 pcie_phy: phy@1c06000 { <<
969 compatible = "qcom,msm <<
970 reg = <0x01c06000 0x10 <<
971 status = "disabled"; <<
972 <<
973 clocks = <&gcc GCC_PCI <<
974 <&gcc GCC_PCI <<
975 <&gcc GCC_PCI <<
976 <&gcc GCC_PCI <<
977 clock-names = "aux", <<
978 "cfg_ahb <<
979 "ref", <<
980 "pipe"; <<
981 <<
982 clock-output-names = " <<
983 #clock-cells = <0>; <<
984 <<
985 #phy-cells = <0>; <<
986 <<
987 resets = <&gcc GCC_PCI <<
988 reset-names = "phy", " <<
989 <<
990 vdda-phy-supply = <&vr <<
991 vdda-pll-supply = <&vr <<
992 }; <<
993 <<
994 ufshc: ufshc@1da4000 { <<
995 compatible = "qcom,msm <<
996 reg = <0x01da4000 0x25 <<
997 interrupts = <GIC_SPI <<
998 phys = <&ufsphy>; <<
999 phy-names = "ufsphy"; <<
1000 lanes-per-direction = <<
1001 power-domains = <&gcc <<
1002 status = "disabled"; <<
1003 #reset-cells = <1>; 546 #reset-cells = <1>;
1004 !! 547 #power-domain-cells = <1>;
1005 clock-names = !! 548 reg = <0x100000 0xb0000>;
1006 "core_clk", <<
1007 "bus_aggr_clk <<
1008 "iface_clk", <<
1009 "core_clk_uni <<
1010 "ref_clk", <<
1011 "tx_lane0_syn <<
1012 "rx_lane0_syn <<
1013 "rx_lane1_syn <<
1014 clocks = <<
1015 <&gcc GCC_UFS <<
1016 <&gcc GCC_AGG <<
1017 <&gcc GCC_UFS <<
1018 <&gcc GCC_UFS <<
1019 <&rpmcc RPM_S <<
1020 <&gcc GCC_UFS <<
1021 <&gcc GCC_UFS <<
1022 <&gcc GCC_UFS <<
1023 freq-table-hz = <<
1024 <50000000 200 <<
1025 <0 0>, <<
1026 <0 0>, <<
1027 <37500000 150 <<
1028 <0 0>, <<
1029 <0 0>, <<
1030 <0 0>, <<
1031 <0 0>; <<
1032 <<
1033 resets = <&gcc GCC_UF <<
1034 reset-names = "rst"; <<
1035 }; <<
1036 <<
1037 ufsphy: phy@1da7000 { <<
1038 compatible = "qcom,ms <<
1039 reg = <0x01da7000 0x1 <<
1040 <<
1041 clocks = <&rpmcc RPM_ <<
1042 <&gcc GCC_UF <<
1043 <&gcc GCC_UF <<
1044 clock-names = "ref", <<
1045 "ref_au <<
1046 "qref"; <<
1047 <<
1048 reset-names = "ufsphy <<
1049 resets = <&ufshc 0>; <<
1050 <<
1051 #phy-cells = <0>; <<
1052 status = "disabled"; <<
1053 }; <<
1054 <<
1055 tcsr_mutex: hwlock@1f40000 { <<
1056 compatible = "qcom,tc <<
1057 reg = <0x01f40000 0x2 <<
1058 #hwlock-cells = <1>; <<
1059 }; <<
1060 <<
1061 tcsr_regs_1: syscon@1f60000 { <<
1062 compatible = "qcom,ms <<
1063 reg = <0x01f60000 0x2 <<
1064 }; <<
1065 <<
1066 tcsr_regs_2: syscon@1fc0000 { <<
1067 compatible = "qcom,ms <<
1068 reg = <0x01fc0000 0x2 <<
1069 }; 549 };
1070 550
1071 tlmm: pinctrl@3400000 { 551 tlmm: pinctrl@3400000 {
1072 compatible = "qcom,ms 552 compatible = "qcom,msm8998-pinctrl";
1073 reg = <0x03400000 0xc !! 553 reg = <0x3400000 0xc00000>;
1074 interrupts = <GIC_SPI 554 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1075 gpio-ranges = <&tlmm <<
1076 gpio-controller; 555 gpio-controller;
1077 #gpio-cells = <2>; !! 556 #gpio-cells = <0x2>;
1078 interrupt-controller; 557 interrupt-controller;
1079 #interrupt-cells = <2 !! 558 #interrupt-cells = <0x2>;
1080 <<
1081 sdc2_on: sdc2-on-stat <<
1082 clk-pins { <<
1083 pins <<
1084 drive <<
1085 bias- <<
1086 }; <<
1087 <<
1088 cmd-pins { <<
1089 pins <<
1090 drive <<
1091 bias- <<
1092 }; <<
1093 <<
1094 data-pins { <<
1095 pins <<
1096 drive <<
1097 bias- <<
1098 }; <<
1099 }; <<
1100 <<
1101 sdc2_off: sdc2-off-st <<
1102 clk-pins { <<
1103 pins <<
1104 drive <<
1105 bias- <<
1106 }; <<
1107 <<
1108 cmd-pins { <<
1109 pins <<
1110 drive <<
1111 bias- <<
1112 }; <<
1113 <<
1114 data-pins { <<
1115 pins <<
1116 drive <<
1117 bias- <<
1118 }; <<
1119 }; <<
1120 <<
1121 sdc2_cd: sdc2-cd-stat <<
1122 pins = "gpio9 <<
1123 function = "g <<
1124 bias-pull-up; <<
1125 drive-strengt <<
1126 }; <<
1127 <<
1128 blsp1_uart3_on: blsp1 <<
1129 tx-pins { <<
1130 pins <<
1131 funct <<
1132 drive <<
1133 bias- <<
1134 }; <<
1135 <<
1136 rx-pins { <<
1137 pins <<
1138 funct <<
1139 drive <<
1140 bias- <<
1141 }; <<
1142 <<
1143 cts-pins { <<
1144 pins <<
1145 funct <<
1146 drive <<
1147 bias- <<
1148 }; <<
1149 <<
1150 rfr-pins { <<
1151 pins <<
1152 funct <<
1153 drive <<
1154 bias- <<
1155 }; <<
1156 }; <<
1157 <<
1158 blsp1_i2c1_default: b <<
1159 pins = "gpio2 <<
1160 function = "b <<
1161 drive-strengt <<
1162 bias-disable; <<
1163 }; <<
1164 <<
1165 blsp1_i2c1_sleep: bls <<
1166 pins = "gpio2 <<
1167 function = "b <<
1168 drive-strengt <<
1169 bias-pull-up; <<
1170 }; <<
1171 <<
1172 blsp1_i2c2_default: b <<
1173 pins = "gpio3 <<
1174 function = "b <<
1175 drive-strengt <<
1176 bias-disable; <<
1177 }; <<
1178 <<
1179 blsp1_i2c2_sleep: bls <<
1180 pins = "gpio3 <<
1181 function = "b <<
1182 drive-strengt <<
1183 bias-pull-up; <<
1184 }; <<
1185 <<
1186 blsp1_i2c3_default: b <<
1187 pins = "gpio4 <<
1188 function = "b <<
1189 drive-strengt <<
1190 bias-disable; <<
1191 }; <<
1192 <<
1193 blsp1_i2c3_sleep: bls <<
1194 pins = "gpio4 <<
1195 function = "b <<
1196 drive-strengt <<
1197 bias-pull-up; <<
1198 }; <<
1199 <<
1200 blsp1_i2c4_default: b <<
1201 pins = "gpio1 <<
1202 function = "b <<
1203 drive-strengt <<
1204 bias-disable; <<
1205 }; <<
1206 <<
1207 blsp1_i2c4_sleep: bls <<
1208 pins = "gpio1 <<
1209 function = "b <<
1210 drive-strengt <<
1211 bias-pull-up; <<
1212 }; <<
1213 <<
1214 blsp1_i2c5_default: b <<
1215 pins = "gpio8 <<
1216 function = "b <<
1217 drive-strengt <<
1218 bias-disable; <<
1219 }; <<
1220 <<
1221 blsp1_i2c5_sleep: bls <<
1222 pins = "gpio8 <<
1223 function = "b <<
1224 drive-strengt <<
1225 bias-pull-up; <<
1226 }; <<
1227 <<
1228 blsp1_i2c6_default: b <<
1229 pins = "gpio4 <<
1230 function = "b <<
1231 drive-strengt <<
1232 bias-disable; <<
1233 }; <<
1234 <<
1235 blsp1_i2c6_sleep: bls <<
1236 pins = "gpio4 <<
1237 function = "b <<
1238 drive-strengt <<
1239 bias-pull-up; <<
1240 }; <<
1241 <<
1242 blsp1_spi_b_default: <<
1243 pins = "gpio2 <<
1244 function = "b <<
1245 drive-strengt <<
1246 bias-disable; <<
1247 }; <<
1248 <<
1249 blsp1_spi1_default: b <<
1250 pins = "gpio0 <<
1251 function = "b <<
1252 drive-strengt <<
1253 bias-disable; <<
1254 }; <<
1255 <<
1256 blsp1_spi2_default: b <<
1257 pins = "gpio3 <<
1258 function = "b <<
1259 drive-strengt <<
1260 bias-disable; <<
1261 }; <<
1262 <<
1263 blsp1_spi3_default: b <<
1264 pins = "gpio4 <<
1265 function = "b <<
1266 drive-strengt <<
1267 bias-disable; <<
1268 }; <<
1269 <<
1270 blsp1_spi4_default: b <<
1271 pins = "gpio8 <<
1272 function = "b <<
1273 drive-strengt <<
1274 bias-disable; <<
1275 }; <<
1276 <<
1277 blsp1_spi5_default: b <<
1278 pins = "gpio8 <<
1279 function = "b <<
1280 drive-strengt <<
1281 bias-disable; <<
1282 }; <<
1283 <<
1284 blsp1_spi6_default: b <<
1285 pins = "gpio4 <<
1286 function = "b <<
1287 drive-strengt <<
1288 bias-disable; <<
1289 }; <<
1290 <<
1291 <<
1292 /* 6 interfaces per Q <<
1293 blsp2_i2c1_default: b <<
1294 pins = "gpio5 <<
1295 function = "b <<
1296 drive-strengt <<
1297 bias-disable; <<
1298 }; <<
1299 <<
1300 blsp2_i2c1_sleep: bls <<
1301 pins = "gpio5 <<
1302 function = "b <<
1303 drive-strengt <<
1304 bias-pull-up; <<
1305 }; <<
1306 <<
1307 blsp2_i2c2_default: b <<
1308 pins = "gpio6 <<
1309 function = "b <<
1310 drive-strengt <<
1311 bias-disable; <<
1312 }; <<
1313 <<
1314 blsp2_i2c2_sleep: bls <<
1315 pins = "gpio6 <<
1316 function = "b <<
1317 drive-strengt <<
1318 bias-pull-up; <<
1319 }; <<
1320 <<
1321 blsp2_i2c3_default: b <<
1322 pins = "gpio5 <<
1323 function = "b <<
1324 drive-strengt <<
1325 bias-disable; <<
1326 }; <<
1327 <<
1328 blsp2_i2c3_sleep: bls <<
1329 pins = "gpio5 <<
1330 function = "b <<
1331 drive-strengt <<
1332 bias-pull-up; <<
1333 }; <<
1334 <<
1335 blsp2_i2c4_default: b <<
1336 pins = "gpio6 <<
1337 function = "b <<
1338 drive-strengt <<
1339 bias-disable; <<
1340 }; <<
1341 <<
1342 blsp2_i2c4_sleep: bls <<
1343 pins = "gpio6 <<
1344 function = "b <<
1345 drive-strengt <<
1346 bias-pull-up; <<
1347 }; <<
1348 <<
1349 blsp2_i2c5_default: b <<
1350 pins = "gpio6 <<
1351 function = "b <<
1352 drive-strengt <<
1353 bias-disable; <<
1354 }; <<
1355 <<
1356 blsp2_i2c5_sleep: bls <<
1357 pins = "gpio6 <<
1358 function = "b <<
1359 drive-strengt <<
1360 bias-pull-up; <<
1361 }; <<
1362 <<
1363 blsp2_i2c6_default: b <<
1364 pins = "gpio8 <<
1365 function = "b <<
1366 drive-strengt <<
1367 bias-disable; <<
1368 }; <<
1369 <<
1370 blsp2_i2c6_sleep: bls <<
1371 pins = "gpio8 <<
1372 function = "b <<
1373 drive-strengt <<
1374 bias-pull-up; <<
1375 }; <<
1376 <<
1377 blsp2_spi1_default: b <<
1378 pins = "gpio5 <<
1379 function = "b <<
1380 drive-strengt <<
1381 bias-disable; <<
1382 }; <<
1383 <<
1384 blsp2_spi2_default: b <<
1385 pins = "gpio4 <<
1386 function = "b <<
1387 drive-strengt <<
1388 bias-disable; <<
1389 }; <<
1390 <<
1391 blsp2_spi3_default: b <<
1392 pins = "gpio4 <<
1393 function = "b <<
1394 drive-strengt <<
1395 bias-disable; <<
1396 }; <<
1397 <<
1398 blsp2_spi4_default: b <<
1399 pins = "gpio6 <<
1400 function = "b <<
1401 drive-strengt <<
1402 bias-disable; <<
1403 }; <<
1404 <<
1405 blsp2_spi5_default: b <<
1406 pins = "gpio5 <<
1407 function = "b <<
1408 drive-strengt <<
1409 bias-disable; <<
1410 }; <<
1411 <<
1412 blsp2_spi6_default: b <<
1413 pins = "gpio8 <<
1414 function = "b <<
1415 drive-strengt <<
1416 bias-disable; <<
1417 }; <<
1418 }; <<
1419 <<
1420 remoteproc_mss: remoteproc@40 <<
1421 compatible = "qcom,ms <<
1422 reg = <0x04080000 0x1 <<
1423 reg-names = "qdsp6", <<
1424 <<
1425 interrupts-extended = <<
1426 <&intc GIC_SP <<
1427 <&modem_smp2p <<
1428 <&modem_smp2p <<
1429 <&modem_smp2p <<
1430 <&modem_smp2p <<
1431 <&modem_smp2p <<
1432 interrupt-names = "wd <<
1433 "ha <<
1434 "sh <<
1435 <<
1436 clocks = <&gcc GCC_MS <<
1437 <&gcc GCC_BI <<
1438 <&gcc GCC_BO <<
1439 <&gcc GCC_MS <<
1440 <&gcc GCC_MS <<
1441 <&gcc GCC_MS <<
1442 <&rpmcc RPM_ <<
1443 <&rpmcc RPM_ <<
1444 clock-names = "iface" <<
1445 "snoc_a <<
1446 <<
1447 qcom,smem-states = <& <<
1448 qcom,smem-state-names <<
1449 <<
1450 resets = <&gcc GCC_MS <<
1451 reset-names = "mss_re <<
1452 <<
1453 qcom,halt-regs = <&tc <<
1454 <<
1455 power-domains = <&rpm <<
1456 <&rpm <<
1457 power-domain-names = <<
1458 <<
1459 status = "disabled"; <<
1460 <<
1461 mba { <<
1462 memory-region <<
1463 }; <<
1464 <<
1465 mpss { <<
1466 memory-region <<
1467 }; <<
1468 <<
1469 metadata { <<
1470 memory-region <<
1471 }; <<
1472 <<
1473 glink-edge { <<
1474 interrupts = <<
1475 label = "mode <<
1476 qcom,remote-p <<
1477 mboxes = <&ap <<
1478 }; <<
1479 }; <<
1480 <<
1481 adreno_gpu: gpu@5000000 { <<
1482 compatible = "qcom,ad <<
1483 reg = <0x05000000 0x4 <<
1484 reg-names = "kgsl_3d0 <<
1485 <<
1486 clocks = <&gcc GCC_GP <<
1487 <&gpucc RBBMT <<
1488 <&gcc GCC_BIM <<
1489 <&gcc GCC_GPU <<
1490 <&gpucc RBCPR <<
1491 <&gpucc GFX3D <<
1492 clock-names = "iface" <<
1493 "rbbmtimer", <<
1494 "mem", <<
1495 "mem_iface", <<
1496 "rbcpr", <<
1497 "core"; <<
1498 <<
1499 interrupts = <GIC_SPI <<
1500 iommus = <&adreno_smm <<
1501 operating-points-v2 = <<
1502 power-domains = <&rpm <<
1503 status = "disabled"; <<
1504 <<
1505 gpu_opp_table: opp-ta <<
1506 compatible = <<
1507 opp-710000097 <<
1508 opp-h <<
1509 opp-l <<
1510 opp-s <<
1511 }; <<
1512 <<
1513 opp-670000048 <<
1514 opp-h <<
1515 opp-l <<
1516 opp-s <<
1517 }; <<
1518 <<
1519 opp-596000097 <<
1520 opp-h <<
1521 opp-l <<
1522 opp-s <<
1523 }; <<
1524 <<
1525 opp-515000097 <<
1526 opp-h <<
1527 opp-l <<
1528 opp-s <<
1529 }; <<
1530 <<
1531 opp-414000000 <<
1532 opp-h <<
1533 opp-l <<
1534 opp-s <<
1535 }; <<
1536 <<
1537 opp-342000000 <<
1538 opp-h <<
1539 opp-l <<
1540 opp-s <<
1541 }; <<
1542 <<
1543 opp-257000000 <<
1544 opp-h <<
1545 opp-l <<
1546 opp-s <<
1547 }; <<
1548 }; <<
1549 }; <<
1550 <<
1551 adreno_smmu: iommu@5040000 { <<
1552 compatible = "qcom,ms <<
1553 reg = <0x05040000 0x1 <<
1554 clocks = <&gcc GCC_GP <<
1555 <&gcc GCC_BI <<
1556 <&gcc GCC_GP <<
1557 clock-names = "iface" <<
1558 <<
1559 #global-interrupts = <<
1560 #iommu-cells = <1>; <<
1561 interrupts = <<
1562 <GIC_SPI 329 <<
1563 <GIC_SPI 330 <<
1564 <GIC_SPI 331 <<
1565 /* <<
1566 * GPU-GX GDSC's pare <<
1567 * GPU-CX for SMMU bu <<
1568 * Contemporarily, we <<
1569 * domain in the Adre <<
1570 * Enable GPU CX/GX G <<
1571 * SoC VDDMX RPM Powe <<
1572 */ <<
1573 power-domains = <&gpu <<
1574 }; <<
1575 <<
1576 gpucc: clock-controller@50650 <<
1577 compatible = "qcom,ms <<
1578 #clock-cells = <1>; <<
1579 #reset-cells = <1>; <<
1580 #power-domain-cells = <<
1581 reg = <0x05065000 0x9 <<
1582 <<
1583 clocks = <&rpmcc RPM_ <<
1584 <&gcc GCC_GP <<
1585 clock-names = "xo", <<
1586 "gpll0" <<
1587 }; <<
1588 <<
1589 lpass_q6_smmu: iommu@5100000 <<
1590 compatible = "qcom,ms <<
1591 reg = <0x05100000 0x4 <<
1592 clocks = <&gcc HLOS1_ <<
1593 clock-names = "bus"; <<
1594 <<
1595 #global-interrupts = <<
1596 #iommu-cells = <1>; <<
1597 interrupts = <<
1598 <GIC_SPI 226 <<
1599 <GIC_SPI 393 <<
1600 <GIC_SPI 394 <<
1601 <GIC_SPI 395 <<
1602 <GIC_SPI 396 <<
1603 <GIC_SPI 397 <<
1604 <GIC_SPI 398 <<
1605 <GIC_SPI 399 <<
1606 <GIC_SPI 400 <<
1607 <GIC_SPI 401 <<
1608 <GIC_SPI 402 <<
1609 <GIC_SPI 403 <<
1610 <GIC_SPI 137 <<
1611 <<
1612 power-domains = <&gcc <<
1613 status = "disabled"; <<
1614 }; <<
1615 <<
1616 remoteproc_slpi: remoteproc@5 <<
1617 compatible = "qcom,ms <<
1618 reg = <0x05800000 0x4 <<
1619 <<
1620 interrupts-extended = <<
1621 <<
1622 <<
1623 <<
1624 <<
1625 interrupt-names = "wd <<
1626 "ha <<
1627 <<
1628 px-supply = <&vreg_lv <<
1629 <<
1630 clocks = <&rpmcc RPM_ <<
1631 clock-names = "xo"; <<
1632 <<
1633 memory-region = <&slp <<
1634 <<
1635 qcom,smem-states = <& <<
1636 qcom,smem-state-names <<
1637 <<
1638 power-domains = <&rpm <<
1639 power-domain-names = <<
1640 <<
1641 status = "disabled"; <<
1642 <<
1643 glink-edge { <<
1644 interrupts = <<
1645 label = "dsps <<
1646 qcom,remote-p <<
1647 mboxes = <&ap <<
1648 }; <<
1649 }; <<
1650 <<
1651 stm: stm@6002000 { <<
1652 compatible = "arm,cor <<
1653 reg = <0x06002000 0x1 <<
1654 <0x16280000 0x1 <<
1655 reg-names = "stm-base <<
1656 status = "disabled"; <<
1657 <<
1658 clocks = <&rpmcc RPM_ <<
1659 clock-names = "apb_pc <<
1660 <<
1661 out-ports { <<
1662 port { <<
1663 stm_o <<
1664 <<
1665 }; <<
1666 }; <<
1667 }; <<
1668 }; <<
1669 <<
1670 funnel1: funnel@6041000 { <<
1671 compatible = "arm,cor <<
1672 reg = <0x06041000 0x1 <<
1673 status = "disabled"; <<
1674 <<
1675 clocks = <&rpmcc RPM_ <<
1676 clock-names = "apb_pc <<
1677 <<
1678 out-ports { <<
1679 port { <<
1680 funne <<
1681 <<
1682 <<
1683 }; <<
1684 }; <<
1685 }; <<
1686 <<
1687 in-ports { <<
1688 #address-cell <<
1689 #size-cells = <<
1690 <<
1691 port@7 { <<
1692 reg = <<
1693 funne <<
1694 <<
1695 }; <<
1696 }; <<
1697 }; <<
1698 }; <<
1699 <<
1700 funnel2: funnel@6042000 { <<
1701 compatible = "arm,cor <<
1702 reg = <0x06042000 0x1 <<
1703 status = "disabled"; <<
1704 <<
1705 clocks = <&rpmcc RPM_ <<
1706 clock-names = "apb_pc <<
1707 <<
1708 out-ports { <<
1709 port { <<
1710 funne <<
1711 <<
1712 <<
1713 }; <<
1714 }; <<
1715 }; <<
1716 <<
1717 in-ports { <<
1718 #address-cell <<
1719 #size-cells = <<
1720 <<
1721 port@6 { <<
1722 reg = <<
1723 funne <<
1724 <<
1725 <<
1726 }; <<
1727 }; <<
1728 }; <<
1729 }; <<
1730 <<
1731 funnel3: funnel@6045000 { <<
1732 compatible = "arm,cor <<
1733 reg = <0x06045000 0x1 <<
1734 status = "disabled"; <<
1735 <<
1736 clocks = <&rpmcc RPM_ <<
1737 clock-names = "apb_pc <<
1738 <<
1739 out-ports { <<
1740 port { <<
1741 merge <<
1742 <<
1743 <<
1744 }; <<
1745 }; <<
1746 }; <<
1747 <<
1748 in-ports { <<
1749 #address-cell <<
1750 #size-cells = <<
1751 <<
1752 port@0 { <<
1753 reg = <<
1754 merge <<
1755 <<
1756 <<
1757 }; <<
1758 }; <<
1759 <<
1760 port@1 { <<
1761 reg = <<
1762 merge <<
1763 <<
1764 <<
1765 }; <<
1766 }; <<
1767 }; <<
1768 }; <<
1769 <<
1770 replicator1: replicator@60460 <<
1771 compatible = "arm,cor <<
1772 reg = <0x06046000 0x1 <<
1773 status = "disabled"; <<
1774 <<
1775 clocks = <&rpmcc RPM_ <<
1776 clock-names = "apb_pc <<
1777 <<
1778 out-ports { <<
1779 port { <<
1780 repli <<
1781 <<
1782 }; <<
1783 }; <<
1784 }; <<
1785 <<
1786 in-ports { <<
1787 port { <<
1788 repli <<
1789 <<
1790 }; <<
1791 }; <<
1792 }; <<
1793 }; <<
1794 <<
1795 etf: etf@6047000 { <<
1796 compatible = "arm,cor <<
1797 reg = <0x06047000 0x1 <<
1798 status = "disabled"; <<
1799 <<
1800 clocks = <&rpmcc RPM_ <<
1801 clock-names = "apb_pc <<
1802 <<
1803 out-ports { <<
1804 port { <<
1805 etf_o <<
1806 <<
1807 <<
1808 }; <<
1809 }; <<
1810 }; <<
1811 <<
1812 in-ports { <<
1813 port { <<
1814 etf_i <<
1815 <<
1816 <<
1817 }; <<
1818 }; <<
1819 }; <<
1820 }; <<
1821 <<
1822 etr: etr@6048000 { <<
1823 compatible = "arm,cor <<
1824 reg = <0x06048000 0x1 <<
1825 status = "disabled"; <<
1826 <<
1827 clocks = <&rpmcc RPM_ <<
1828 clock-names = "apb_pc <<
1829 arm,scatter-gather; <<
1830 <<
1831 in-ports { <<
1832 port { <<
1833 etr_i <<
1834 <<
1835 <<
1836 }; <<
1837 }; <<
1838 }; <<
1839 }; <<
1840 <<
1841 etm1: etm@7840000 { <<
1842 compatible = "arm,cor <<
1843 reg = <0x07840000 0x1 <<
1844 status = "disabled"; <<
1845 <<
1846 clocks = <&rpmcc RPM_ <<
1847 clock-names = "apb_pc <<
1848 <<
1849 cpu = <&CPU0>; <<
1850 <<
1851 out-ports { <<
1852 port { <<
1853 etm0_ <<
1854 <<
1855 <<
1856 }; <<
1857 }; <<
1858 }; <<
1859 }; <<
1860 <<
1861 etm2: etm@7940000 { <<
1862 compatible = "arm,cor <<
1863 reg = <0x07940000 0x1 <<
1864 status = "disabled"; <<
1865 <<
1866 clocks = <&rpmcc RPM_ <<
1867 clock-names = "apb_pc <<
1868 <<
1869 cpu = <&CPU1>; <<
1870 <<
1871 out-ports { <<
1872 port { <<
1873 etm1_ <<
1874 <<
1875 <<
1876 }; <<
1877 }; <<
1878 }; <<
1879 }; <<
1880 <<
1881 etm3: etm@7a40000 { <<
1882 compatible = "arm,cor <<
1883 reg = <0x07a40000 0x1 <<
1884 status = "disabled"; <<
1885 <<
1886 clocks = <&rpmcc RPM_ <<
1887 clock-names = "apb_pc <<
1888 <<
1889 cpu = <&CPU2>; <<
1890 <<
1891 out-ports { <<
1892 port { <<
1893 etm2_ <<
1894 <<
1895 <<
1896 }; <<
1897 }; <<
1898 }; <<
1899 }; <<
1900 <<
1901 etm4: etm@7b40000 { <<
1902 compatible = "arm,cor <<
1903 reg = <0x07b40000 0x1 <<
1904 status = "disabled"; <<
1905 <<
1906 clocks = <&rpmcc RPM_ <<
1907 clock-names = "apb_pc <<
1908 <<
1909 cpu = <&CPU3>; <<
1910 <<
1911 out-ports { <<
1912 port { <<
1913 etm3_ <<
1914 <<
1915 <<
1916 }; <<
1917 }; <<
1918 }; <<
1919 }; <<
1920 <<
1921 funnel4: funnel@7b60000 { /* <<
1922 compatible = "arm,cor <<
1923 reg = <0x07b60000 0x1 <<
1924 status = "disabled"; <<
1925 <<
1926 clocks = <&rpmcc RPM_ <<
1927 clock-names = "apb_pc <<
1928 <<
1929 out-ports { <<
1930 port { <<
1931 apss_ <<
1932 <<
1933 <<
1934 }; <<
1935 }; <<
1936 }; <<
1937 <<
1938 in-ports { <<
1939 #address-cell <<
1940 #size-cells = <<
1941 <<
1942 port@0 { <<
1943 reg = <<
1944 apss_ <<
1945 <<
1946 <<
1947 }; <<
1948 }; <<
1949 <<
1950 port@1 { <<
1951 reg = <<
1952 apss_ <<
1953 <<
1954 <<
1955 }; <<
1956 }; <<
1957 <<
1958 port@2 { <<
1959 reg = <<
1960 apss_ <<
1961 <<
1962 <<
1963 }; <<
1964 }; <<
1965 <<
1966 port@3 { <<
1967 reg = <<
1968 apss_ <<
1969 <<
1970 <<
1971 }; <<
1972 }; <<
1973 <<
1974 port@4 { <<
1975 reg = <<
1976 apss_ <<
1977 <<
1978 <<
1979 }; <<
1980 }; <<
1981 <<
1982 port@5 { <<
1983 reg = <<
1984 apss_ <<
1985 <<
1986 <<
1987 }; <<
1988 }; <<
1989 <<
1990 port@6 { <<
1991 reg = <<
1992 apss_ <<
1993 <<
1994 <<
1995 }; <<
1996 }; <<
1997 <<
1998 port@7 { <<
1999 reg = <<
2000 apss_ <<
2001 <<
2002 <<
2003 }; <<
2004 }; <<
2005 }; <<
2006 }; <<
2007 <<
2008 funnel5: funnel@7b70000 { <<
2009 compatible = "arm,cor <<
2010 reg = <0x07b70000 0x1 <<
2011 status = "disabled"; <<
2012 <<
2013 clocks = <&rpmcc RPM_ <<
2014 clock-names = "apb_pc <<
2015 <<
2016 out-ports { <<
2017 port { <<
2018 apss_ <<
2019 <<
2020 <<
2021 }; <<
2022 }; <<
2023 }; <<
2024 <<
2025 in-ports { <<
2026 port { <<
2027 apss_ <<
2028 <<
2029 <<
2030 }; <<
2031 }; <<
2032 }; <<
2033 }; <<
2034 <<
2035 etm5: etm@7c40000 { <<
2036 compatible = "arm,cor <<
2037 reg = <0x07c40000 0x1 <<
2038 status = "disabled"; <<
2039 <<
2040 clocks = <&rpmcc RPM_ <<
2041 clock-names = "apb_pc <<
2042 <<
2043 cpu = <&CPU4>; <<
2044 <<
2045 out-ports { <<
2046 port { <<
2047 etm4_ <<
2048 <<
2049 }; <<
2050 }; <<
2051 }; <<
2052 }; <<
2053 <<
2054 etm6: etm@7d40000 { <<
2055 compatible = "arm,cor <<
2056 reg = <0x07d40000 0x1 <<
2057 status = "disabled"; <<
2058 <<
2059 clocks = <&rpmcc RPM_ <<
2060 clock-names = "apb_pc <<
2061 <<
2062 cpu = <&CPU5>; <<
2063 <<
2064 out-ports { <<
2065 port { <<
2066 etm5_ <<
2067 <<
2068 }; <<
2069 }; <<
2070 }; <<
2071 }; <<
2072 <<
2073 etm7: etm@7e40000 { <<
2074 compatible = "arm,cor <<
2075 reg = <0x07e40000 0x1 <<
2076 status = "disabled"; <<
2077 <<
2078 clocks = <&rpmcc RPM_ <<
2079 clock-names = "apb_pc <<
2080 <<
2081 cpu = <&CPU6>; <<
2082 <<
2083 out-ports { <<
2084 port { <<
2085 etm6_ <<
2086 <<
2087 }; <<
2088 }; <<
2089 }; <<
2090 }; <<
2091 <<
2092 etm8: etm@7f40000 { <<
2093 compatible = "arm,cor <<
2094 reg = <0x07f40000 0x1 <<
2095 status = "disabled"; <<
2096 <<
2097 clocks = <&rpmcc RPM_ <<
2098 clock-names = "apb_pc <<
2099 <<
2100 cpu = <&CPU7>; <<
2101 <<
2102 out-ports { <<
2103 port { <<
2104 etm7_ <<
2105 <<
2106 }; <<
2107 }; <<
2108 }; <<
2109 }; <<
2110 <<
2111 sram@290000 { <<
2112 compatible = "qcom,rp <<
2113 reg = <0x00290000 0x1 <<
2114 }; 559 };
2115 560
2116 spmi_bus: spmi@800f000 { 561 spmi_bus: spmi@800f000 {
2117 compatible = "qcom,sp 562 compatible = "qcom,spmi-pmic-arb";
2118 reg = <0x0800f000 0x1 !! 563 reg = <0x800f000 0x1000>,
2119 <0x08400000 0x1 !! 564 <0x8400000 0x1000000>,
2120 <0x09400000 0x1 !! 565 <0x9400000 0x1000000>,
2121 <0x0a400000 0x2 !! 566 <0xa400000 0x220000>,
2122 <0x0800a000 0x3 !! 567 <0x800a000 0x3000>;
2123 reg-names = "core", " 568 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
2124 interrupt-names = "pe 569 interrupt-names = "periph_irq";
2125 interrupts = <GIC_SPI 570 interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
2126 qcom,ee = <0>; 571 qcom,ee = <0>;
2127 qcom,channel = <0>; 572 qcom,channel = <0>;
2128 #address-cells = <2>; 573 #address-cells = <2>;
2129 #size-cells = <0>; 574 #size-cells = <0>;
2130 interrupt-controller; 575 interrupt-controller;
2131 #interrupt-cells = <4 576 #interrupt-cells = <4>;
>> 577 cell-index = <0>;
2132 }; 578 };
2133 579
2134 usb3: usb@a8f8800 { !! 580 tsens0: thermal@10aa000 {
2135 compatible = "qcom,ms !! 581 compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
2136 reg = <0x0a8f8800 0x4 !! 582 reg = <0x10aa000 0x2000>;
2137 status = "disabled"; <<
2138 #address-cells = <1>; <<
2139 #size-cells = <1>; <<
2140 ranges; <<
2141 <<
2142 clocks = <&gcc GCC_CF <<
2143 <&gcc GCC_US <<
2144 <&gcc GCC_AG <<
2145 <&gcc GCC_US <<
2146 <&gcc GCC_US <<
2147 clock-names = "cfg_no <<
2148 "core", <<
2149 "iface" <<
2150 "sleep" <<
2151 "mock_u <<
2152 <<
2153 assigned-clocks = <&g <<
2154 <&g <<
2155 assigned-clock-rates <<
2156 <<
2157 interrupts = <GIC_SPI <<
2158 <GIC_SPI <<
2159 <GIC_SPI <<
2160 interrupt-names = "pw <<
2161 "qu <<
2162 "ss <<
2163 <<
2164 power-domains = <&gcc <<
2165 <<
2166 resets = <&gcc GCC_US <<
2167 <<
2168 usb3_dwc3: usb@a80000 <<
2169 compatible = <<
2170 reg = <0x0a80 <<
2171 interrupts = <<
2172 snps,dis_u2_s <<
2173 snps,dis_enbl <<
2174 snps,parkmode <<
2175 phys = <&qusb <<
2176 phy-names = " <<
2177 snps,has-lpm- <<
2178 snps,hird-thr <<
2179 }; <<
2180 }; <<
2181 <<
2182 usb3phy: phy@c010000 { <<
2183 compatible = "qcom,ms <<
2184 reg = <0x0c010000 0x1 <<
2185 <<
2186 clocks = <&gcc GCC_US <<
2187 <&gcc GCC_US <<
2188 <&gcc GCC_US <<
2189 <&gcc GCC_US <<
2190 clock-names = "aux", <<
2191 "ref", <<
2192 "cfg_ah <<
2193 "pipe"; <<
2194 clock-output-names = <<
2195 #clock-cells = <0>; <<
2196 #phy-cells = <0>; <<
2197 <<
2198 resets = <&gcc GCC_US <<
2199 <&gcc GCC_US <<
2200 reset-names = "phy", <<
2201 "phy_ph <<
2202 <<
2203 qcom,tcsr-reg = <&tcs <<
2204 <<
2205 status = "disabled"; <<
2206 }; <<
2207 <<
2208 qusb2phy: phy@c012000 { <<
2209 compatible = "qcom,ms <<
2210 reg = <0x0c012000 0x2 <<
2211 status = "disabled"; <<
2212 #phy-cells = <0>; <<
2213 <<
2214 clocks = <&gcc GCC_US <<
2215 <&gcc GCC_RX <<
2216 clock-names = "cfg_ah <<
2217 <<
2218 resets = <&gcc GCC_QU <<
2219 <<
2220 nvmem-cells = <&qusb2 <<
2221 }; <<
2222 <<
2223 sdhc2: mmc@c0a4900 { <<
2224 compatible = "qcom,ms <<
2225 reg = <0x0c0a4900 0x3 <<
2226 reg-names = "hc", "co <<
2227 <<
2228 interrupts = <GIC_SPI <<
2229 <GIC_SPI <<
2230 interrupt-names = "hc <<
2231 <<
2232 clock-names = "iface" <<
2233 clocks = <&gcc GCC_SD <<
2234 <&gcc GCC_SD <<
2235 <&rpmcc RPM_ <<
2236 bus-width = <4>; <<
2237 status = "disabled"; <<
2238 }; <<
2239 <<
2240 blsp1_dma: dma-controller@c14 <<
2241 compatible = "qcom,ba <<
2242 reg = <0x0c144000 0x2 <<
2243 interrupts = <GIC_SPI <<
2244 clocks = <&gcc GCC_BL <<
2245 clock-names = "bam_cl <<
2246 #dma-cells = <1>; <<
2247 qcom,ee = <0>; <<
2248 qcom,controlled-remot <<
2249 num-channels = <18>; <<
2250 qcom,num-ees = <4>; <<
2251 }; <<
2252 <<
2253 blsp1_uart3: serial@c171000 { <<
2254 compatible = "qcom,ms <<
2255 reg = <0x0c171000 0x1 <<
2256 interrupts = <GIC_SPI <<
2257 clocks = <&gcc GCC_BL <<
2258 <&gcc GCC_BL <<
2259 clock-names = "core", <<
2260 dmas = <&blsp1_dma 4> <<
2261 dma-names = "tx", "rx <<
2262 pinctrl-names = "defa <<
2263 pinctrl-0 = <&blsp1_u <<
2264 status = "disabled"; <<
2265 }; <<
2266 <<
2267 blsp1_i2c1: i2c@c175000 { <<
2268 compatible = "qcom,i2 <<
2269 reg = <0x0c175000 0x6 <<
2270 interrupts = <GIC_SPI <<
2271 <<
2272 clocks = <&gcc GCC_BL <<
2273 <&gcc GCC_BL <<
2274 clock-names = "core", <<
2275 dmas = <&blsp1_dma 6> <<
2276 dma-names = "tx", "rx <<
2277 pinctrl-names = "defa <<
2278 pinctrl-0 = <&blsp1_i <<
2279 pinctrl-1 = <&blsp1_i <<
2280 clock-frequency = <40 <<
2281 <<
2282 status = "disabled"; <<
2283 #address-cells = <1>; <<
2284 #size-cells = <0>; <<
2285 }; <<
2286 <<
2287 blsp1_i2c2: i2c@c176000 { <<
2288 compatible = "qcom,i2 <<
2289 reg = <0x0c176000 0x6 <<
2290 interrupts = <GIC_SPI <<
2291 <<
2292 clocks = <&gcc GCC_BL <<
2293 <&gcc GCC_BL <<
2294 clock-names = "core", <<
2295 dmas = <&blsp1_dma 8> <<
2296 dma-names = "tx", "rx <<
2297 pinctrl-names = "defa <<
2298 pinctrl-0 = <&blsp1_i <<
2299 pinctrl-1 = <&blsp1_i <<
2300 clock-frequency = <40 <<
2301 <<
2302 status = "disabled"; <<
2303 #address-cells = <1>; <<
2304 #size-cells = <0>; <<
2305 }; <<
2306 <<
2307 blsp1_i2c3: i2c@c177000 { <<
2308 compatible = "qcom,i2 <<
2309 reg = <0x0c177000 0x6 <<
2310 interrupts = <GIC_SPI <<
2311 <<
2312 clocks = <&gcc GCC_BL <<
2313 <&gcc GCC_BL <<
2314 clock-names = "core", <<
2315 dmas = <&blsp1_dma 10 <<
2316 dma-names = "tx", "rx <<
2317 pinctrl-names = "defa <<
2318 pinctrl-0 = <&blsp1_i <<
2319 pinctrl-1 = <&blsp1_i <<
2320 clock-frequency = <40 <<
2321 <<
2322 status = "disabled"; <<
2323 #address-cells = <1>; <<
2324 #size-cells = <0>; <<
2325 }; <<
2326 <<
2327 blsp1_i2c4: i2c@c178000 { <<
2328 compatible = "qcom,i2 <<
2329 reg = <0x0c178000 0x6 <<
2330 interrupts = <GIC_SPI <<
2331 <<
2332 clocks = <&gcc GCC_BL <<
2333 <&gcc GCC_BL <<
2334 clock-names = "core", <<
2335 dmas = <&blsp1_dma 12 <<
2336 dma-names = "tx", "rx <<
2337 pinctrl-names = "defa <<
2338 pinctrl-0 = <&blsp1_i <<
2339 pinctrl-1 = <&blsp1_i <<
2340 clock-frequency = <40 <<
2341 <<
2342 status = "disabled"; <<
2343 #address-cells = <1>; <<
2344 #size-cells = <0>; <<
2345 }; <<
2346 <<
2347 blsp1_i2c5: i2c@c179000 { <<
2348 compatible = "qcom,i2 <<
2349 reg = <0x0c179000 0x6 <<
2350 interrupts = <GIC_SPI <<
2351 <<
2352 clocks = <&gcc GCC_BL <<
2353 <&gcc GCC_BL <<
2354 clock-names = "core", <<
2355 dmas = <&blsp1_dma 14 <<
2356 dma-names = "tx", "rx <<
2357 pinctrl-names = "defa <<
2358 pinctrl-0 = <&blsp1_i <<
2359 pinctrl-1 = <&blsp1_i <<
2360 clock-frequency = <40 <<
2361 <<
2362 status = "disabled"; <<
2363 #address-cells = <1>; <<
2364 #size-cells = <0>; <<
2365 }; <<
2366 <<
2367 blsp1_i2c6: i2c@c17a000 { <<
2368 compatible = "qcom,i2 <<
2369 reg = <0x0c17a000 0x6 <<
2370 interrupts = <GIC_SPI <<
2371 <<
2372 clocks = <&gcc GCC_BL <<
2373 <&gcc GCC_BL <<
2374 clock-names = "core", <<
2375 dmas = <&blsp1_dma 16 <<
2376 dma-names = "tx", "rx <<
2377 pinctrl-names = "defa <<
2378 pinctrl-0 = <&blsp1_i <<
2379 pinctrl-1 = <&blsp1_i <<
2380 clock-frequency = <40 <<
2381 <<
2382 status = "disabled"; <<
2383 #address-cells = <1>; <<
2384 #size-cells = <0>; <<
2385 }; <<
2386 <<
2387 blsp1_spi1: spi@c175000 { <<
2388 compatible = "qcom,sp <<
2389 reg = <0x0c175000 0x6 <<
2390 interrupts = <GIC_SPI <<
2391 <<
2392 clocks = <&gcc GCC_BL <<
2393 <&gcc GCC_BL <<
2394 clock-names = "core", <<
2395 dmas = <&blsp1_dma 6> <<
2396 dma-names = "tx", "rx <<
2397 pinctrl-names = "defa <<
2398 pinctrl-0 = <&blsp1_s <<
2399 <<
2400 status = "disabled"; <<
2401 #address-cells = <1>; <<
2402 #size-cells = <0>; <<
2403 }; <<
2404 <<
2405 blsp1_spi2: spi@c176000 { <<
2406 compatible = "qcom,sp <<
2407 reg = <0x0c176000 0x6 <<
2408 interrupts = <GIC_SPI <<
2409 <<
2410 clocks = <&gcc GCC_BL <<
2411 <&gcc GCC_BL <<
2412 clock-names = "core", <<
2413 dmas = <&blsp1_dma 8> <<
2414 dma-names = "tx", "rx <<
2415 pinctrl-names = "defa <<
2416 pinctrl-0 = <&blsp1_s <<
2417 <<
2418 status = "disabled"; <<
2419 #address-cells = <1>; <<
2420 #size-cells = <0>; <<
2421 }; <<
2422 <<
2423 blsp1_spi3: spi@c177000 { <<
2424 compatible = "qcom,sp <<
2425 reg = <0x0c177000 0x6 <<
2426 interrupts = <GIC_SPI <<
2427 <<
2428 clocks = <&gcc GCC_BL <<
2429 <&gcc GCC_BL <<
2430 clock-names = "core", <<
2431 dmas = <&blsp1_dma 10 <<
2432 dma-names = "tx", "rx <<
2433 pinctrl-names = "defa <<
2434 pinctrl-0 = <&blsp1_s <<
2435 583
2436 status = "disabled"; !! 584 #qcom,sensors = <12>;
2437 #address-cells = <1>; !! 585 #thermal-sensor-cells = <1>;
2438 #size-cells = <0>; <<
2439 }; 586 };
2440 587
2441 blsp1_spi4: spi@c178000 { !! 588 tsens1: thermal@10ad000 {
2442 compatible = "qcom,sp !! 589 compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
2443 reg = <0x0c178000 0x6 !! 590 reg = <0x10ad000 0x2000>;
2444 interrupts = <GIC_SPI <<
2445 <<
2446 clocks = <&gcc GCC_BL <<
2447 <&gcc GCC_BL <<
2448 clock-names = "core", <<
2449 dmas = <&blsp1_dma 12 <<
2450 dma-names = "tx", "rx <<
2451 pinctrl-names = "defa <<
2452 pinctrl-0 = <&blsp1_s <<
2453 591
2454 status = "disabled"; !! 592 #qcom,sensors = <8>;
2455 #address-cells = <1>; !! 593 #thermal-sensor-cells = <1>;
2456 #size-cells = <0>; <<
2457 }; 594 };
2458 595
2459 blsp1_spi5: spi@c179000 { !! 596 tcsr_mutex_regs: syscon@1f40000 {
2460 compatible = "qcom,sp !! 597 compatible = "syscon";
2461 reg = <0x0c179000 0x6 !! 598 reg = <0x1f40000 0x20000>;
2462 interrupts = <GIC_SPI <<
2463 <<
2464 clocks = <&gcc GCC_BL <<
2465 <&gcc GCC_BL <<
2466 clock-names = "core", <<
2467 dmas = <&blsp1_dma 14 <<
2468 dma-names = "tx", "rx <<
2469 pinctrl-names = "defa <<
2470 pinctrl-0 = <&blsp1_s <<
2471 <<
2472 status = "disabled"; <<
2473 #address-cells = <1>; <<
2474 #size-cells = <0>; <<
2475 }; 599 };
2476 600
2477 blsp1_spi6: spi@c17a000 { !! 601 apcs_glb: mailbox@9820000 {
2478 compatible = "qcom,sp !! 602 compatible = "qcom,msm8998-apcs-hmss-global";
2479 reg = <0x0c17a000 0x6 !! 603 reg = <0x17911000 0x1000>;
2480 interrupts = <GIC_SPI <<
2481 <<
2482 clocks = <&gcc GCC_BL <<
2483 <&gcc GCC_BL <<
2484 clock-names = "core", <<
2485 dmas = <&blsp1_dma 16 <<
2486 dma-names = "tx", "rx <<
2487 pinctrl-names = "defa <<
2488 pinctrl-0 = <&blsp1_s <<
2489 <<
2490 status = "disabled"; <<
2491 #address-cells = <1>; <<
2492 #size-cells = <0>; <<
2493 }; <<
2494 604
2495 blsp2_dma: dma-controller@c18 !! 605 #mbox-cells = <1>;
2496 compatible = "qcom,ba <<
2497 reg = <0x0c184000 0x2 <<
2498 interrupts = <GIC_SPI <<
2499 clocks = <&gcc GCC_BL <<
2500 clock-names = "bam_cl <<
2501 #dma-cells = <1>; <<
2502 qcom,ee = <0>; <<
2503 qcom,controlled-remot <<
2504 num-channels = <18>; <<
2505 qcom,num-ees = <4>; <<
2506 }; 606 };
2507 607
2508 blsp2_uart1: serial@c1b0000 { 608 blsp2_uart1: serial@c1b0000 {
2509 compatible = "qcom,ms 609 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2510 reg = <0x0c1b0000 0x1 !! 610 reg = <0xc1b0000 0x1000>;
2511 interrupts = <GIC_SPI 611 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
2512 clocks = <&gcc GCC_BL 612 clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
2513 <&gcc GCC_BL 613 <&gcc GCC_BLSP2_AHB_CLK>;
2514 clock-names = "core", 614 clock-names = "core", "iface";
2515 status = "disabled"; 615 status = "disabled";
2516 }; 616 };
2517 617
2518 blsp2_i2c1: i2c@c1b5000 { <<
2519 compatible = "qcom,i2 <<
2520 reg = <0x0c1b5000 0x6 <<
2521 interrupts = <GIC_SPI <<
2522 <<
2523 clocks = <&gcc GCC_BL <<
2524 <&gcc GCC_BL <<
2525 clock-names = "core", <<
2526 dmas = <&blsp2_dma 6> <<
2527 dma-names = "tx", "rx <<
2528 pinctrl-names = "defa <<
2529 pinctrl-0 = <&blsp2_i <<
2530 pinctrl-1 = <&blsp2_i <<
2531 clock-frequency = <40 <<
2532 <<
2533 status = "disabled"; <<
2534 #address-cells = <1>; <<
2535 #size-cells = <0>; <<
2536 }; <<
2537 <<
2538 blsp2_i2c2: i2c@c1b6000 { <<
2539 compatible = "qcom,i2 <<
2540 reg = <0x0c1b6000 0x6 <<
2541 interrupts = <GIC_SPI <<
2542 <<
2543 clocks = <&gcc GCC_BL <<
2544 <&gcc GCC_BL <<
2545 clock-names = "core", <<
2546 dmas = <&blsp2_dma 8> <<
2547 dma-names = "tx", "rx <<
2548 pinctrl-names = "defa <<
2549 pinctrl-0 = <&blsp2_i <<
2550 pinctrl-1 = <&blsp2_i <<
2551 clock-frequency = <40 <<
2552 <<
2553 status = "disabled"; <<
2554 #address-cells = <1>; <<
2555 #size-cells = <0>; <<
2556 }; <<
2557 <<
2558 blsp2_i2c3: i2c@c1b7000 { <<
2559 compatible = "qcom,i2 <<
2560 reg = <0x0c1b7000 0x6 <<
2561 interrupts = <GIC_SPI <<
2562 <<
2563 clocks = <&gcc GCC_BL <<
2564 <&gcc GCC_BL <<
2565 clock-names = "core", <<
2566 dmas = <&blsp2_dma 10 <<
2567 dma-names = "tx", "rx <<
2568 pinctrl-names = "defa <<
2569 pinctrl-0 = <&blsp2_i <<
2570 pinctrl-1 = <&blsp2_i <<
2571 clock-frequency = <40 <<
2572 <<
2573 status = "disabled"; <<
2574 #address-cells = <1>; <<
2575 #size-cells = <0>; <<
2576 }; <<
2577 <<
2578 blsp2_i2c4: i2c@c1b8000 { <<
2579 compatible = "qcom,i2 <<
2580 reg = <0x0c1b8000 0x6 <<
2581 interrupts = <GIC_SPI <<
2582 <<
2583 clocks = <&gcc GCC_BL <<
2584 <&gcc GCC_BL <<
2585 clock-names = "core", <<
2586 dmas = <&blsp2_dma 12 <<
2587 dma-names = "tx", "rx <<
2588 pinctrl-names = "defa <<
2589 pinctrl-0 = <&blsp2_i <<
2590 pinctrl-1 = <&blsp2_i <<
2591 clock-frequency = <40 <<
2592 <<
2593 status = "disabled"; <<
2594 #address-cells = <1>; <<
2595 #size-cells = <0>; <<
2596 }; <<
2597 <<
2598 blsp2_i2c5: i2c@c1b9000 { <<
2599 compatible = "qcom,i2 <<
2600 reg = <0x0c1b9000 0x6 <<
2601 interrupts = <GIC_SPI <<
2602 <<
2603 clocks = <&gcc GCC_BL <<
2604 <&gcc GCC_BL <<
2605 clock-names = "core", <<
2606 dmas = <&blsp2_dma 14 <<
2607 dma-names = "tx", "rx <<
2608 pinctrl-names = "defa <<
2609 pinctrl-0 = <&blsp2_i <<
2610 pinctrl-1 = <&blsp2_i <<
2611 clock-frequency = <40 <<
2612 <<
2613 status = "disabled"; <<
2614 #address-cells = <1>; <<
2615 #size-cells = <0>; <<
2616 }; <<
2617 <<
2618 blsp2_i2c6: i2c@c1ba000 { <<
2619 compatible = "qcom,i2 <<
2620 reg = <0x0c1ba000 0x6 <<
2621 interrupts = <GIC_SPI <<
2622 <<
2623 clocks = <&gcc GCC_BL <<
2624 <&gcc GCC_BL <<
2625 clock-names = "core", <<
2626 dmas = <&blsp2_dma 16 <<
2627 dma-names = "tx", "rx <<
2628 pinctrl-names = "defa <<
2629 pinctrl-0 = <&blsp2_i <<
2630 pinctrl-1 = <&blsp2_i <<
2631 clock-frequency = <40 <<
2632 <<
2633 status = "disabled"; <<
2634 #address-cells = <1>; <<
2635 #size-cells = <0>; <<
2636 }; <<
2637 <<
2638 blsp2_spi1: spi@c1b5000 { <<
2639 compatible = "qcom,sp <<
2640 reg = <0x0c1b5000 0x6 <<
2641 interrupts = <GIC_SPI <<
2642 <<
2643 clocks = <&gcc GCC_BL <<
2644 <&gcc GCC_BL <<
2645 clock-names = "core", <<
2646 dmas = <&blsp2_dma 6> <<
2647 dma-names = "tx", "rx <<
2648 pinctrl-names = "defa <<
2649 pinctrl-0 = <&blsp2_s <<
2650 <<
2651 status = "disabled"; <<
2652 #address-cells = <1>; <<
2653 #size-cells = <0>; <<
2654 }; <<
2655 <<
2656 blsp2_spi2: spi@c1b6000 { <<
2657 compatible = "qcom,sp <<
2658 reg = <0x0c1b6000 0x6 <<
2659 interrupts = <GIC_SPI <<
2660 <<
2661 clocks = <&gcc GCC_BL <<
2662 <&gcc GCC_BL <<
2663 clock-names = "core", <<
2664 dmas = <&blsp2_dma 8> <<
2665 dma-names = "tx", "rx <<
2666 pinctrl-names = "defa <<
2667 pinctrl-0 = <&blsp2_s <<
2668 <<
2669 status = "disabled"; <<
2670 #address-cells = <1>; <<
2671 #size-cells = <0>; <<
2672 }; <<
2673 <<
2674 blsp2_spi3: spi@c1b7000 { <<
2675 compatible = "qcom,sp <<
2676 reg = <0x0c1b7000 0x6 <<
2677 interrupts = <GIC_SPI <<
2678 <<
2679 clocks = <&gcc GCC_BL <<
2680 <&gcc GCC_BL <<
2681 clock-names = "core", <<
2682 dmas = <&blsp2_dma 10 <<
2683 dma-names = "tx", "rx <<
2684 pinctrl-names = "defa <<
2685 pinctrl-0 = <&blsp2_s <<
2686 <<
2687 status = "disabled"; <<
2688 #address-cells = <1>; <<
2689 #size-cells = <0>; <<
2690 }; <<
2691 <<
2692 blsp2_spi4: spi@c1b8000 { <<
2693 compatible = "qcom,sp <<
2694 reg = <0x0c1b8000 0x6 <<
2695 interrupts = <GIC_SPI <<
2696 <<
2697 clocks = <&gcc GCC_BL <<
2698 <&gcc GCC_BL <<
2699 clock-names = "core", <<
2700 dmas = <&blsp2_dma 12 <<
2701 dma-names = "tx", "rx <<
2702 pinctrl-names = "defa <<
2703 pinctrl-0 = <&blsp2_s <<
2704 <<
2705 status = "disabled"; <<
2706 #address-cells = <1>; <<
2707 #size-cells = <0>; <<
2708 }; <<
2709 <<
2710 blsp2_spi5: spi@c1b9000 { <<
2711 compatible = "qcom,sp <<
2712 reg = <0x0c1b9000 0x6 <<
2713 interrupts = <GIC_SPI <<
2714 <<
2715 clocks = <&gcc GCC_BL <<
2716 <&gcc GCC_BL <<
2717 clock-names = "core", <<
2718 dmas = <&blsp2_dma 14 <<
2719 dma-names = "tx", "rx <<
2720 pinctrl-names = "defa <<
2721 pinctrl-0 = <&blsp2_s <<
2722 <<
2723 status = "disabled"; <<
2724 #address-cells = <1>; <<
2725 #size-cells = <0>; <<
2726 }; <<
2727 <<
2728 blsp2_spi6: spi@c1ba000 { <<
2729 compatible = "qcom,sp <<
2730 reg = <0x0c1ba000 0x6 <<
2731 interrupts = <GIC_SPI <<
2732 <<
2733 clocks = <&gcc GCC_BL <<
2734 <&gcc GCC_BL <<
2735 clock-names = "core", <<
2736 dmas = <&blsp2_dma 16 <<
2737 dma-names = "tx", "rx <<
2738 pinctrl-names = "defa <<
2739 pinctrl-0 = <&blsp2_s <<
2740 <<
2741 status = "disabled"; <<
2742 #address-cells = <1>; <<
2743 #size-cells = <0>; <<
2744 }; <<
2745 <<
2746 mmcc: clock-controller@c8c000 <<
2747 compatible = "qcom,mm <<
2748 #clock-cells = <1>; <<
2749 #reset-cells = <1>; <<
2750 #power-domain-cells = <<
2751 reg = <0xc8c0000 0x40 <<
2752 <<
2753 clock-names = "xo", <<
2754 "gpll0" <<
2755 "dsi0ds <<
2756 "dsi0by <<
2757 "dsi1ds <<
2758 "dsi1by <<
2759 "hdmipl <<
2760 "dplink <<
2761 "dpvco" <<
2762 "gpll0_ <<
2763 clocks = <&rpmcc RPM_ <<
2764 <&gcc GCC_MM <<
2765 <&mdss_dsi0_ <<
2766 <&mdss_dsi0_ <<
2767 <&mdss_dsi1_ <<
2768 <&mdss_dsi1_ <<
2769 <0>, <<
2770 <0>, <<
2771 <0>, <<
2772 <&gcc GCC_MM <<
2773 }; <<
2774 <<
2775 mdss: display-subsystem@c9000 <<
2776 compatible = "qcom,ms <<
2777 reg = <0x0c900000 0x1 <<
2778 reg-names = "mdss"; <<
2779 <<
2780 interrupts = <GIC_SPI <<
2781 interrupt-controller; <<
2782 #interrupt-cells = <1 <<
2783 <<
2784 clocks = <&mmcc MDSS_ <<
2785 <&mmcc MDSS_ <<
2786 <&mmcc MDSS_ <<
2787 clock-names = "iface" <<
2788 "bus", <<
2789 "core"; <<
2790 <<
2791 power-domains = <&mmc <<
2792 iommus = <&mmss_smmu <<
2793 <<
2794 #address-cells = <1>; <<
2795 #size-cells = <1>; <<
2796 ranges; <<
2797 <<
2798 status = "disabled"; <<
2799 <<
2800 mdss_mdp: display-con <<
2801 compatible = <<
2802 reg = <0x0c90 <<
2803 <0x0c9a <<
2804 <0x0c9b <<
2805 <0x0c9b <<
2806 reg-names = " <<
2807 " <<
2808 " <<
2809 " <<
2810 <<
2811 interrupt-par <<
2812 interrupts = <<
2813 <<
2814 clocks = <&mm <<
2815 <&mm <<
2816 <&mm <<
2817 <&mm <<
2818 <&mm <<
2819 clock-names = <<
2820 <<
2821 <<
2822 <<
2823 <<
2824 <<
2825 assigned-cloc <<
2826 assigned-cloc <<
2827 <<
2828 operating-poi <<
2829 power-domains <<
2830 <<
2831 mdp_opp_table <<
2832 compa <<
2833 <<
2834 opp-1 <<
2835 <<
2836 <<
2837 }; <<
2838 <<
2839 opp-2 <<
2840 <<
2841 <<
2842 }; <<
2843 <<
2844 opp-3 <<
2845 <<
2846 <<
2847 }; <<
2848 <<
2849 opp-4 <<
2850 <<
2851 <<
2852 }; <<
2853 }; <<
2854 <<
2855 ports { <<
2856 #addr <<
2857 #size <<
2858 <<
2859 port@ <<
2860 <<
2861 <<
2862 <<
2863 <<
2864 <<
2865 }; <<
2866 <<
2867 port@ <<
2868 <<
2869 <<
2870 <<
2871 <<
2872 <<
2873 }; <<
2874 }; <<
2875 }; <<
2876 <<
2877 mdss_dsi0: dsi@c99400 <<
2878 compatible = <<
2879 reg = <0x0c99 <<
2880 reg-names = " <<
2881 <<
2882 interrupt-par <<
2883 interrupts = <<
2884 <<
2885 clocks = <&mm <<
2886 <&mm <<
2887 <&mm <<
2888 <&mm <<
2889 <&mm <<
2890 <&mm <<
2891 clock-names = <<
2892 <<
2893 <<
2894 <<
2895 <<
2896 <<
2897 assigned-cloc <<
2898 <<
2899 assigned-cloc <<
2900 <<
2901 <<
2902 operating-poi <<
2903 power-domains <<
2904 <<
2905 phys = <&mdss <<
2906 phy-names = " <<
2907 <<
2908 #address-cell <<
2909 #size-cells = <<
2910 <<
2911 status = "dis <<
2912 <<
2913 ports { <<
2914 #addr <<
2915 #size <<
2916 <<
2917 port@ <<
2918 <<
2919 <<
2920 <<
2921 <<
2922 <<
2923 }; <<
2924 <<
2925 port@ <<
2926 <<
2927 <<
2928 <<
2929 <<
2930 }; <<
2931 }; <<
2932 }; <<
2933 <<
2934 mdss_dsi0_phy: phy@c9 <<
2935 compatible = <<
2936 reg = <0x0c99 <<
2937 <0x0c99 <<
2938 <0x0c99 <<
2939 reg-names = " <<
2940 " <<
2941 " <<
2942 <<
2943 clocks = <&mm <<
2944 <&rp <<
2945 clock-names = <<
2946 <<
2947 #clock-cells <<
2948 #phy-cells = <<
2949 <<
2950 status = "dis <<
2951 }; <<
2952 <<
2953 mdss_dsi1: dsi@c99600 <<
2954 compatible = <<
2955 reg = <0x0c99 <<
2956 reg-names = " <<
2957 <<
2958 interrupt-par <<
2959 interrupts = <<
2960 <<
2961 clocks = <&mm <<
2962 <&mm <<
2963 <&mm <<
2964 <&mm <<
2965 <&mm <<
2966 <&mm <<
2967 clock-names = <<
2968 <<
2969 <<
2970 <<
2971 <<
2972 <<
2973 assigned-cloc <<
2974 <<
2975 assigned-cloc <<
2976 <<
2977 <<
2978 operating-poi <<
2979 power-domains <<
2980 <<
2981 phys = <&mdss <<
2982 phy-names = " <<
2983 <<
2984 #address-cell <<
2985 #size-cells = <<
2986 <<
2987 status = "dis <<
2988 <<
2989 ports { <<
2990 #addr <<
2991 #size <<
2992 <<
2993 port@ <<
2994 <<
2995 <<
2996 <<
2997 <<
2998 <<
2999 }; <<
3000 <<
3001 port@ <<
3002 <<
3003 <<
3004 <<
3005 <<
3006 }; <<
3007 }; <<
3008 }; <<
3009 <<
3010 mdss_dsi1_phy: phy@c9 <<
3011 compatible = <<
3012 reg = <0x0c99 <<
3013 <0x0c99 <<
3014 <0x0c99 <<
3015 reg-names = " <<
3016 " <<
3017 " <<
3018 <<
3019 clocks = <&mm <<
3020 <&rp <<
3021 clock-names = <<
3022 <<
3023 <<
3024 #clock-cells <<
3025 #phy-cells = <<
3026 <<
3027 status = "dis <<
3028 }; <<
3029 }; <<
3030 <<
3031 venus: video-codec@cc00000 { <<
3032 compatible = "qcom,ms <<
3033 reg = <0x0cc00000 0xf <<
3034 interrupts = <GIC_SPI <<
3035 power-domains = <&mmc <<
3036 clocks = <&mmcc VIDEO <<
3037 <&mmcc VIDEO <<
3038 <&mmcc VIDEO <<
3039 <&mmcc VIDEO <<
3040 clock-names = "core", <<
3041 iommus = <&mmss_smmu <<
3042 <&mmss_smmu <<
3043 <&mmss_smmu <<
3044 <&mmss_smmu <<
3045 <&mmss_smmu <<
3046 <&mmss_smmu <<
3047 <&mmss_smmu <<
3048 <&mmss_smmu <<
3049 <&mmss_smmu <<
3050 <&mmss_smmu <<
3051 <&mmss_smmu <<
3052 <&mmss_smmu <<
3053 <&mmss_smmu <<
3054 <&mmss_smmu <<
3055 <&mmss_smmu <<
3056 <&mmss_smmu <<
3057 <&mmss_smmu <<
3058 <&mmss_smmu <<
3059 <&mmss_smmu <<
3060 <&mmss_smmu <<
3061 memory-region = <&ven <<
3062 status = "disabled"; <<
3063 <<
3064 video-decoder { <<
3065 compatible = <<
3066 clocks = <&mm <<
3067 clock-names = <<
3068 power-domains <<
3069 }; <<
3070 <<
3071 video-encoder { <<
3072 compatible = <<
3073 clocks = <&mm <<
3074 clock-names = <<
3075 power-domains <<
3076 }; <<
3077 }; <<
3078 <<
3079 mmss_smmu: iommu@cd00000 { <<
3080 compatible = "qcom,ms <<
3081 reg = <0x0cd00000 0x4 <<
3082 #iommu-cells = <1>; <<
3083 <<
3084 clocks = <&mmcc MNOC_ <<
3085 <&mmcc BIMC_ <<
3086 <&mmcc BIMC_ <<
3087 clock-names = "iface- <<
3088 "iface- <<
3089 "bus-sm <<
3090 <<
3091 #global-interrupts = <<
3092 interrupts = <<
3093 <GIC_SPI 263 <<
3094 <GIC_SPI 266 <<
3095 <GIC_SPI 267 <<
3096 <GIC_SPI 268 <<
3097 <GIC_SPI 244 <<
3098 <GIC_SPI 245 <<
3099 <GIC_SPI 247 <<
3100 <GIC_SPI 248 <<
3101 <GIC_SPI 249 <<
3102 <GIC_SPI 250 <<
3103 <GIC_SPI 251 <<
3104 <GIC_SPI 252 <<
3105 <GIC_SPI 253 <<
3106 <GIC_SPI 254 <<
3107 <GIC_SPI 255 <<
3108 <GIC_SPI 256 <<
3109 <GIC_SPI 260 <<
3110 <GIC_SPI 261 <<
3111 <GIC_SPI 262 <<
3112 <GIC_SPI 272 <<
3113 <<
3114 power-domains = <&mmc <<
3115 }; <<
3116 <<
3117 remoteproc_adsp: remoteproc@1 <<
3118 compatible = "qcom,ms <<
3119 reg = <0x17300000 0x4 <<
3120 <<
3121 interrupts-extended = <<
3122 <<
3123 <<
3124 <<
3125 <<
3126 interrupt-names = "wd <<
3127 "ha <<
3128 <<
3129 clocks = <&rpmcc RPM_ <<
3130 clock-names = "xo"; <<
3131 <<
3132 memory-region = <&ads <<
3133 <<
3134 qcom,smem-states = <& <<
3135 qcom,smem-state-names <<
3136 <<
3137 power-domains = <&rpm <<
3138 power-domain-names = <<
3139 <<
3140 status = "disabled"; <<
3141 <<
3142 glink-edge { <<
3143 interrupts = <<
3144 label = "lpas <<
3145 qcom,remote-p <<
3146 mboxes = <&ap <<
3147 }; <<
3148 }; <<
3149 <<
3150 apcs_glb: mailbox@17911000 { <<
3151 compatible = "qcom,ms <<
3152 "qcom,ms <<
3153 reg = <0x17911000 0x1 <<
3154 <<
3155 #mbox-cells = <1>; <<
3156 }; <<
3157 <<
3158 timer@17920000 { 618 timer@17920000 {
3159 #address-cells = <1>; 619 #address-cells = <1>;
3160 #size-cells = <1>; 620 #size-cells = <1>;
3161 ranges; 621 ranges;
3162 compatible = "arm,arm 622 compatible = "arm,armv7-timer-mem";
3163 reg = <0x17920000 0x1 623 reg = <0x17920000 0x1000>;
3164 624
3165 frame@17921000 { 625 frame@17921000 {
3166 frame-number 626 frame-number = <0>;
3167 interrupts = 627 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3168 628 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
3169 reg = <0x1792 629 reg = <0x17921000 0x1000>,
3170 <0x1792 630 <0x17922000 0x1000>;
3171 }; 631 };
3172 632
3173 frame@17923000 { 633 frame@17923000 {
3174 frame-number 634 frame-number = <1>;
3175 interrupts = 635 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3176 reg = <0x1792 636 reg = <0x17923000 0x1000>;
3177 status = "dis 637 status = "disabled";
3178 }; 638 };
3179 639
3180 frame@17924000 { 640 frame@17924000 {
3181 frame-number 641 frame-number = <2>;
3182 interrupts = 642 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3183 reg = <0x1792 643 reg = <0x17924000 0x1000>;
3184 status = "dis 644 status = "disabled";
3185 }; 645 };
3186 646
3187 frame@17925000 { 647 frame@17925000 {
3188 frame-number 648 frame-number = <3>;
3189 interrupts = 649 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3190 reg = <0x1792 650 reg = <0x17925000 0x1000>;
3191 status = "dis 651 status = "disabled";
3192 }; 652 };
3193 653
3194 frame@17926000 { 654 frame@17926000 {
3195 frame-number 655 frame-number = <4>;
3196 interrupts = 656 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3197 reg = <0x1792 657 reg = <0x17926000 0x1000>;
3198 status = "dis 658 status = "disabled";
3199 }; 659 };
3200 660
3201 frame@17927000 { 661 frame@17927000 {
3202 frame-number 662 frame-number = <5>;
3203 interrupts = 663 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3204 reg = <0x1792 664 reg = <0x17927000 0x1000>;
3205 status = "dis 665 status = "disabled";
3206 }; 666 };
3207 667
3208 frame@17928000 { 668 frame@17928000 {
3209 frame-number 669 frame-number = <6>;
3210 interrupts = 670 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3211 reg = <0x1792 671 reg = <0x17928000 0x1000>;
3212 status = "dis 672 status = "disabled";
3213 }; 673 };
3214 }; 674 };
3215 675
3216 intc: interrupt-controller@17 676 intc: interrupt-controller@17a00000 {
3217 compatible = "arm,gic 677 compatible = "arm,gic-v3";
3218 reg = <0x17a00000 0x1 678 reg = <0x17a00000 0x10000>, /* GICD */
3219 <0x17b00000 0x1 679 <0x17b00000 0x100000>; /* GICR * 8 */
3220 #interrupt-cells = <3 680 #interrupt-cells = <3>;
3221 #address-cells = <1>; 681 #address-cells = <1>;
3222 #size-cells = <1>; 682 #size-cells = <1>;
3223 ranges; 683 ranges;
3224 interrupt-controller; 684 interrupt-controller;
3225 #redistributor-region 685 #redistributor-regions = <1>;
3226 redistributor-stride 686 redistributor-stride = <0x0 0x20000>;
3227 interrupts = <GIC_PPI 687 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3228 }; <<
3229 <<
3230 wifi: wifi@18800000 { <<
3231 compatible = "qcom,wc <<
3232 status = "disabled"; <<
3233 reg = <0x18800000 0x8 <<
3234 reg-names = "membase" <<
3235 memory-region = <&wla <<
3236 clocks = <&rpmcc RPM_ <<
3237 clock-names = "cxo_re <<
3238 interrupts = <<
3239 <GIC_SPI 413 <<
3240 <GIC_SPI 414 <<
3241 <GIC_SPI 415 <<
3242 <GIC_SPI 416 <<
3243 <GIC_SPI 417 <<
3244 <GIC_SPI 418 <<
3245 <GIC_SPI 420 <<
3246 <GIC_SPI 421 <<
3247 <GIC_SPI 422 <<
3248 <GIC_SPI 423 <<
3249 <GIC_SPI 424 <<
3250 <GIC_SPI 425 <<
3251 iommus = <&anoc2_smmu <<
3252 <&anoc2_smmu <<
3253 qcom,snoc-host-cap-8b <<
3254 qcom,no-msa-ready-ind <<
3255 }; 688 };
3256 }; 689 };
3257 }; 690 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.