1 // SPDX-License-Identifier: GPL-2.0 1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2016, The Linux Foundation. A 2 /* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
3 3
4 #include <dt-bindings/interrupt-controller/arm 4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/clock/qcom,gcc-msm8998.h 5 #include <dt-bindings/clock/qcom,gcc-msm8998.h>
6 #include <dt-bindings/clock/qcom,gpucc-msm8998 <<
7 #include <dt-bindings/clock/qcom,mmcc-msm8998. <<
8 #include <dt-bindings/clock/qcom,rpmcc.h> 6 #include <dt-bindings/clock/qcom,rpmcc.h>
9 #include <dt-bindings/firmware/qcom,scm.h> <<
10 #include <dt-bindings/power/qcom-rpmpd.h> 7 #include <dt-bindings/power/qcom-rpmpd.h>
11 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/gpio/gpio.h>
12 9
13 / { 10 / {
14 interrupt-parent = <&intc>; 11 interrupt-parent = <&intc>;
15 12
16 qcom,msm-id = <292 0x0>; 13 qcom,msm-id = <292 0x0>;
17 14
18 #address-cells = <2>; 15 #address-cells = <2>;
19 #size-cells = <2>; 16 #size-cells = <2>;
20 17
21 chosen { }; 18 chosen { };
22 19
23 memory@80000000 { !! 20 memory {
24 device_type = "memory"; 21 device_type = "memory";
25 /* We expect the bootloader to 22 /* We expect the bootloader to fill in the reg */
26 reg = <0x0 0x80000000 0x0 0x0> !! 23 reg = <0 0 0 0>;
27 }; 24 };
28 25
29 reserved-memory { 26 reserved-memory {
30 #address-cells = <2>; 27 #address-cells = <2>;
31 #size-cells = <2>; 28 #size-cells = <2>;
32 ranges; 29 ranges;
33 30
34 hyp_mem: memory@85800000 { !! 31 memory@85800000 {
35 reg = <0x0 0x85800000 !! 32 reg = <0x0 0x85800000 0x0 0x800000>;
36 no-map; <<
37 }; <<
38 <<
39 xbl_mem: memory@85e00000 { <<
40 reg = <0x0 0x85e00000 <<
41 no-map; 33 no-map;
42 }; 34 };
43 35
44 smem_mem: smem-mem@86000000 { 36 smem_mem: smem-mem@86000000 {
45 reg = <0x0 0x86000000 37 reg = <0x0 0x86000000 0x0 0x200000>;
46 no-map; 38 no-map;
47 }; 39 };
48 40
49 tz_mem: memory@86200000 { !! 41 memory@86200000 {
50 reg = <0x0 0x86200000 42 reg = <0x0 0x86200000 0x0 0x2d00000>;
51 no-map; 43 no-map;
52 }; 44 };
53 45
54 rmtfs_mem: memory@88f00000 { !! 46 rmtfs {
55 compatible = "qcom,rmt 47 compatible = "qcom,rmtfs-mem";
56 reg = <0x0 0x88f00000 <<
57 no-map; <<
58 <<
59 qcom,client-id = <1>; <<
60 qcom,vmid = <QCOM_SCM_ <<
61 }; <<
62 <<
63 spss_mem: memory@8ab00000 { <<
64 reg = <0x0 0x8ab00000 <<
65 no-map; <<
66 }; <<
67 48
68 adsp_mem: memory@8b200000 { !! 49 size = <0x0 0x200000>;
69 reg = <0x0 0x8b200000 !! 50 alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
70 no-map; 51 no-map;
71 }; <<
72 <<
73 mpss_mem: memory@8cc00000 { <<
74 reg = <0x0 0x8cc00000 <<
75 no-map; <<
76 }; <<
77 <<
78 venus_mem: memory@93c00000 { <<
79 reg = <0x0 0x93c00000 <<
80 no-map; <<
81 }; <<
82 <<
83 mba_mem: memory@94100000 { <<
84 reg = <0x0 0x94100000 <<
85 no-map; <<
86 }; <<
87 52
88 slpi_mem: memory@94300000 { !! 53 qcom,client-id = <1>;
89 reg = <0x0 0x94300000 !! 54 qcom,vmid = <15>;
90 no-map; <<
91 }; <<
92 <<
93 ipa_fw_mem: memory@95200000 { <<
94 reg = <0x0 0x95200000 <<
95 no-map; <<
96 }; <<
97 <<
98 ipa_gsi_mem: memory@95210000 { <<
99 reg = <0x0 0x95210000 <<
100 no-map; <<
101 }; <<
102 <<
103 gpu_mem: memory@95600000 { <<
104 reg = <0x0 0x95600000 <<
105 no-map; <<
106 }; <<
107 <<
108 wlan_msa_mem: memory@95700000 <<
109 reg = <0x0 0x95700000 <<
110 no-map; <<
111 }; <<
112 <<
113 mdata_mem: mpss-metadata { <<
114 alloc-ranges = <0x0 0x <<
115 size = <0x0 0x4000>; <<
116 no-map; <<
117 }; 55 };
118 }; 56 };
119 57
120 clocks { 58 clocks {
121 xo: xo-board { 59 xo: xo-board {
122 compatible = "fixed-cl 60 compatible = "fixed-clock";
123 #clock-cells = <0>; 61 #clock-cells = <0>;
124 clock-frequency = <192 62 clock-frequency = <19200000>;
125 clock-output-names = " 63 clock-output-names = "xo_board";
126 }; 64 };
127 65
128 sleep_clk: sleep-clk { !! 66 sleep_clk {
129 compatible = "fixed-cl 67 compatible = "fixed-clock";
130 #clock-cells = <0>; 68 #clock-cells = <0>;
131 clock-frequency = <327 69 clock-frequency = <32764>;
132 }; 70 };
133 }; 71 };
134 72
135 cpus { 73 cpus {
136 #address-cells = <2>; 74 #address-cells = <2>;
137 #size-cells = <0>; 75 #size-cells = <0>;
138 76
139 CPU0: cpu@0 { 77 CPU0: cpu@0 {
140 device_type = "cpu"; 78 device_type = "cpu";
141 compatible = "qcom,kry !! 79 compatible = "arm,armv8";
142 reg = <0x0 0x0>; 80 reg = <0x0 0x0>;
143 enable-method = "psci" 81 enable-method = "psci";
144 capacity-dmips-mhz = < <<
145 cpu-idle-states = <&LI 82 cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
146 next-level-cache = <&L 83 next-level-cache = <&L2_0>;
147 L2_0: l2-cache { 84 L2_0: l2-cache {
148 compatible = " !! 85 compatible = "arm,arch-cache";
149 cache-level = 86 cache-level = <2>;
150 cache-unified; !! 87 };
>> 88 L1_I_0: l1-icache {
>> 89 compatible = "arm,arch-cache";
>> 90 };
>> 91 L1_D_0: l1-dcache {
>> 92 compatible = "arm,arch-cache";
151 }; 93 };
152 }; 94 };
153 95
154 CPU1: cpu@1 { 96 CPU1: cpu@1 {
155 device_type = "cpu"; 97 device_type = "cpu";
156 compatible = "qcom,kry !! 98 compatible = "arm,armv8";
157 reg = <0x0 0x1>; 99 reg = <0x0 0x1>;
158 enable-method = "psci" 100 enable-method = "psci";
159 capacity-dmips-mhz = < <<
160 cpu-idle-states = <&LI 101 cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
161 next-level-cache = <&L 102 next-level-cache = <&L2_0>;
>> 103 L1_I_1: l1-icache {
>> 104 compatible = "arm,arch-cache";
>> 105 };
>> 106 L1_D_1: l1-dcache {
>> 107 compatible = "arm,arch-cache";
>> 108 };
162 }; 109 };
163 110
164 CPU2: cpu@2 { 111 CPU2: cpu@2 {
165 device_type = "cpu"; 112 device_type = "cpu";
166 compatible = "qcom,kry !! 113 compatible = "arm,armv8";
167 reg = <0x0 0x2>; 114 reg = <0x0 0x2>;
168 enable-method = "psci" 115 enable-method = "psci";
169 capacity-dmips-mhz = < <<
170 cpu-idle-states = <&LI 116 cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
171 next-level-cache = <&L 117 next-level-cache = <&L2_0>;
>> 118 L1_I_2: l1-icache {
>> 119 compatible = "arm,arch-cache";
>> 120 };
>> 121 L1_D_2: l1-dcache {
>> 122 compatible = "arm,arch-cache";
>> 123 };
172 }; 124 };
173 125
174 CPU3: cpu@3 { 126 CPU3: cpu@3 {
175 device_type = "cpu"; 127 device_type = "cpu";
176 compatible = "qcom,kry !! 128 compatible = "arm,armv8";
177 reg = <0x0 0x3>; 129 reg = <0x0 0x3>;
178 enable-method = "psci" 130 enable-method = "psci";
179 capacity-dmips-mhz = < <<
180 cpu-idle-states = <&LI 131 cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
181 next-level-cache = <&L 132 next-level-cache = <&L2_0>;
>> 133 L1_I_3: l1-icache {
>> 134 compatible = "arm,arch-cache";
>> 135 };
>> 136 L1_D_3: l1-dcache {
>> 137 compatible = "arm,arch-cache";
>> 138 };
182 }; 139 };
183 140
184 CPU4: cpu@100 { 141 CPU4: cpu@100 {
185 device_type = "cpu"; 142 device_type = "cpu";
186 compatible = "qcom,kry !! 143 compatible = "arm,armv8";
187 reg = <0x0 0x100>; 144 reg = <0x0 0x100>;
188 enable-method = "psci" 145 enable-method = "psci";
189 capacity-dmips-mhz = < <<
190 cpu-idle-states = <&BI 146 cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
191 next-level-cache = <&L 147 next-level-cache = <&L2_1>;
192 L2_1: l2-cache { 148 L2_1: l2-cache {
193 compatible = " !! 149 compatible = "arm,arch-cache";
194 cache-level = 150 cache-level = <2>;
195 cache-unified; !! 151 };
>> 152 L1_I_100: l1-icache {
>> 153 compatible = "arm,arch-cache";
>> 154 };
>> 155 L1_D_100: l1-dcache {
>> 156 compatible = "arm,arch-cache";
196 }; 157 };
197 }; 158 };
198 159
199 CPU5: cpu@101 { 160 CPU5: cpu@101 {
200 device_type = "cpu"; 161 device_type = "cpu";
201 compatible = "qcom,kry !! 162 compatible = "arm,armv8";
202 reg = <0x0 0x101>; 163 reg = <0x0 0x101>;
203 enable-method = "psci" 164 enable-method = "psci";
204 capacity-dmips-mhz = < <<
205 cpu-idle-states = <&BI 165 cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
206 next-level-cache = <&L 166 next-level-cache = <&L2_1>;
>> 167 L1_I_101: l1-icache {
>> 168 compatible = "arm,arch-cache";
>> 169 };
>> 170 L1_D_101: l1-dcache {
>> 171 compatible = "arm,arch-cache";
>> 172 };
207 }; 173 };
208 174
209 CPU6: cpu@102 { 175 CPU6: cpu@102 {
210 device_type = "cpu"; 176 device_type = "cpu";
211 compatible = "qcom,kry !! 177 compatible = "arm,armv8";
212 reg = <0x0 0x102>; 178 reg = <0x0 0x102>;
213 enable-method = "psci" 179 enable-method = "psci";
214 capacity-dmips-mhz = < <<
215 cpu-idle-states = <&BI 180 cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
216 next-level-cache = <&L 181 next-level-cache = <&L2_1>;
>> 182 L1_I_102: l1-icache {
>> 183 compatible = "arm,arch-cache";
>> 184 };
>> 185 L1_D_102: l1-dcache {
>> 186 compatible = "arm,arch-cache";
>> 187 };
217 }; 188 };
218 189
219 CPU7: cpu@103 { 190 CPU7: cpu@103 {
220 device_type = "cpu"; 191 device_type = "cpu";
221 compatible = "qcom,kry !! 192 compatible = "arm,armv8";
222 reg = <0x0 0x103>; 193 reg = <0x0 0x103>;
223 enable-method = "psci" 194 enable-method = "psci";
224 capacity-dmips-mhz = < <<
225 cpu-idle-states = <&BI 195 cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
226 next-level-cache = <&L 196 next-level-cache = <&L2_1>;
>> 197 L1_I_103: l1-icache {
>> 198 compatible = "arm,arch-cache";
>> 199 };
>> 200 L1_D_103: l1-dcache {
>> 201 compatible = "arm,arch-cache";
>> 202 };
227 }; 203 };
228 204
229 cpu-map { 205 cpu-map {
230 cluster0 { 206 cluster0 {
231 core0 { 207 core0 {
232 cpu = 208 cpu = <&CPU0>;
233 }; 209 };
234 210
235 core1 { 211 core1 {
236 cpu = 212 cpu = <&CPU1>;
237 }; 213 };
238 214
239 core2 { 215 core2 {
240 cpu = 216 cpu = <&CPU2>;
241 }; 217 };
242 218
243 core3 { 219 core3 {
244 cpu = 220 cpu = <&CPU3>;
245 }; 221 };
246 }; 222 };
247 223
248 cluster1 { 224 cluster1 {
249 core0 { 225 core0 {
250 cpu = 226 cpu = <&CPU4>;
251 }; 227 };
252 228
253 core1 { 229 core1 {
254 cpu = 230 cpu = <&CPU5>;
255 }; 231 };
256 232
257 core2 { 233 core2 {
258 cpu = 234 cpu = <&CPU6>;
259 }; 235 };
260 236
261 core3 { 237 core3 {
262 cpu = 238 cpu = <&CPU7>;
263 }; 239 };
264 }; 240 };
265 }; 241 };
266 242
267 idle-states { 243 idle-states {
268 entry-method = "psci"; 244 entry-method = "psci";
269 245
270 LITTLE_CPU_SLEEP_0: cp 246 LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
271 compatible = " 247 compatible = "arm,idle-state";
272 idle-state-nam 248 idle-state-name = "little-retention";
273 /* CPU Retenti <<
274 arm,psci-suspe 249 arm,psci-suspend-param = <0x00000002>;
275 entry-latency- 250 entry-latency-us = <81>;
276 exit-latency-u 251 exit-latency-us = <86>;
277 min-residency- !! 252 min-residency-us = <200>;
278 }; 253 };
279 254
280 LITTLE_CPU_SLEEP_1: cp 255 LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
281 compatible = " 256 compatible = "arm,idle-state";
282 idle-state-nam 257 idle-state-name = "little-power-collapse";
283 /* CPU + L2 Po <<
284 arm,psci-suspe 258 arm,psci-suspend-param = <0x40000003>;
285 entry-latency- !! 259 entry-latency-us = <273>;
286 exit-latency-u !! 260 exit-latency-us = <612>;
287 min-residency- !! 261 min-residency-us = <1000>;
288 local-timer-st 262 local-timer-stop;
289 }; 263 };
290 264
291 BIG_CPU_SLEEP_0: cpu-s 265 BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
292 compatible = " 266 compatible = "arm,idle-state";
293 idle-state-nam 267 idle-state-name = "big-retention";
294 /* CPU Retenti <<
295 arm,psci-suspe 268 arm,psci-suspend-param = <0x00000002>;
296 entry-latency- 269 entry-latency-us = <79>;
297 exit-latency-u 270 exit-latency-us = <82>;
298 min-residency- !! 271 min-residency-us = <200>;
299 }; 272 };
300 273
301 BIG_CPU_SLEEP_1: cpu-s 274 BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
302 compatible = " 275 compatible = "arm,idle-state";
303 idle-state-nam 276 idle-state-name = "big-power-collapse";
304 /* CPU + L2 Po <<
305 arm,psci-suspe 277 arm,psci-suspend-param = <0x40000003>;
306 entry-latency- !! 278 entry-latency-us = <336>;
307 exit-latency-u !! 279 exit-latency-us = <525>;
308 min-residency- !! 280 min-residency-us = <1000>;
309 local-timer-st 281 local-timer-stop;
310 }; 282 };
311 }; 283 };
312 }; 284 };
313 285
314 firmware { 286 firmware {
315 scm { 287 scm {
316 compatible = "qcom,scm 288 compatible = "qcom,scm-msm8998", "qcom,scm";
317 }; 289 };
318 }; 290 };
319 291
320 dsi_opp_table: opp-table-dsi { !! 292 tcsr_mutex: hwlock {
321 compatible = "operating-points !! 293 compatible = "qcom,tcsr-mutex";
322 !! 294 syscon = <&tcsr_mutex_regs 0 0x1000>;
323 opp-131250000 { !! 295 #hwlock-cells = <1>;
324 opp-hz = /bits/ 64 <13 <<
325 required-opps = <&rpmp <<
326 }; <<
327 <<
328 opp-210000000 { <<
329 opp-hz = /bits/ 64 <21 <<
330 required-opps = <&rpmp <<
331 }; <<
332 <<
333 opp-312500000 { <<
334 opp-hz = /bits/ 64 <31 <<
335 required-opps = <&rpmp <<
336 }; <<
337 }; 296 };
338 297
339 psci { 298 psci {
340 compatible = "arm,psci-1.0"; 299 compatible = "arm,psci-1.0";
341 method = "smc"; 300 method = "smc";
342 }; 301 };
343 302
344 rpm: remoteproc { !! 303 rpm-glink {
345 compatible = "qcom,msm8998-rpm !! 304 compatible = "qcom,glink-rpm";
>> 305
>> 306 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
>> 307 qcom,rpm-msg-ram = <&rpm_msg_ram>;
>> 308 mboxes = <&apcs_glb 0>;
>> 309
>> 310 rpm_requests: rpm-requests {
>> 311 compatible = "qcom,rpm-msm8998";
>> 312 qcom,glink-channels = "rpm_requests";
>> 313
>> 314 rpmcc: clock-controller {
>> 315 compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
>> 316 #clock-cells = <1>;
>> 317 };
>> 318
>> 319 rpmpd: power-controller {
>> 320 compatible = "qcom,msm8998-rpmpd";
>> 321 #power-domain-cells = <1>;
>> 322 operating-points-v2 = <&rpmpd_opp_table>;
>> 323
>> 324 rpmpd_opp_table: opp-table {
>> 325 compatible = "operating-points-v2";
>> 326
>> 327 rpmpd_opp_ret: opp1 {
>> 328 opp-level = <16>;
>> 329 };
346 330
347 glink-edge { !! 331 rpmpd_opp_ret_plus: opp2 {
348 compatible = "qcom,gli !! 332 opp-level = <32>;
>> 333 };
>> 334
>> 335 rpmpd_opp_min_svs: opp3 {
>> 336 opp-level = <48>;
>> 337 };
>> 338
>> 339 rpmpd_opp_low_svs: opp4 {
>> 340 opp-level = <64>;
>> 341 };
>> 342
>> 343 rpmpd_opp_svs: opp5 {
>> 344 opp-level = <128>;
>> 345 };
>> 346
>> 347 rpmpd_opp_svs_plus: opp6 {
>> 348 opp-level = <192>;
>> 349 };
349 350
350 interrupts = <GIC_SPI !! 351 rpmpd_opp_nom: opp7 {
351 qcom,rpm-msg-ram = <&r !! 352 opp-level = <256>;
352 mboxes = <&apcs_glb 0> !! 353 };
353 !! 354
354 rpm_requests: rpm-requ !! 355 rpmpd_opp_nom_plus: opp8 {
355 compatible = " !! 356 opp-level = <320>;
356 qcom,glink-cha !! 357 };
357 !! 358
358 rpmcc: clock-c !! 359 rpmpd_opp_turbo: opp9 {
359 compat !! 360 opp-level = <384>;
360 clocks !! 361 };
361 clock- !! 362
362 #clock !! 363 rpmpd_opp_turbo_plus: opp10 {
363 }; !! 364 opp-level = <512>;
364 <<
365 rpmpd: power-c <<
366 compat <<
367 #power <<
368 operat <<
369 <<
370 rpmpd_ <<
371 <<
372 <<
373 <<
374 <<
375 <<
376 <<
377 <<
378 <<
379 <<
380 <<
381 <<
382 <<
383 <<
384 <<
385 <<
386 <<
387 <<
388 <<
389 <<
390 <<
391 <<
392 <<
393 <<
394 <<
395 <<
396 <<
397 <<
398 <<
399 <<
400 <<
401 <<
402 <<
403 <<
404 <<
405 <<
406 <<
407 <<
408 <<
409 <<
410 <<
411 <<
412 }; 365 };
413 }; 366 };
414 }; 367 };
415 }; 368 };
416 }; 369 };
417 370
418 smem { 371 smem {
419 compatible = "qcom,smem"; 372 compatible = "qcom,smem";
420 memory-region = <&smem_mem>; 373 memory-region = <&smem_mem>;
421 hwlocks = <&tcsr_mutex 3>; 374 hwlocks = <&tcsr_mutex 3>;
422 }; 375 };
423 376
424 smp2p-lpass { 377 smp2p-lpass {
425 compatible = "qcom,smp2p"; 378 compatible = "qcom,smp2p";
426 qcom,smem = <443>, <429>; 379 qcom,smem = <443>, <429>;
427 380
428 interrupts = <GIC_SPI 158 IRQ_ 381 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
429 382
430 mboxes = <&apcs_glb 10>; 383 mboxes = <&apcs_glb 10>;
431 384
432 qcom,local-pid = <0>; 385 qcom,local-pid = <0>;
433 qcom,remote-pid = <2>; 386 qcom,remote-pid = <2>;
434 387
435 adsp_smp2p_out: master-kernel 388 adsp_smp2p_out: master-kernel {
436 qcom,entry-name = "mas 389 qcom,entry-name = "master-kernel";
437 #qcom,smem-state-cells 390 #qcom,smem-state-cells = <1>;
438 }; 391 };
439 392
440 adsp_smp2p_in: slave-kernel { 393 adsp_smp2p_in: slave-kernel {
441 qcom,entry-name = "sla 394 qcom,entry-name = "slave-kernel";
442 395
443 interrupt-controller; 396 interrupt-controller;
444 #interrupt-cells = <2> 397 #interrupt-cells = <2>;
445 }; 398 };
446 }; 399 };
447 400
448 smp2p-mpss { 401 smp2p-mpss {
449 compatible = "qcom,smp2p"; 402 compatible = "qcom,smp2p";
450 qcom,smem = <435>, <428>; 403 qcom,smem = <435>, <428>;
451 interrupts = <GIC_SPI 451 IRQ_ 404 interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
452 mboxes = <&apcs_glb 14>; 405 mboxes = <&apcs_glb 14>;
453 qcom,local-pid = <0>; 406 qcom,local-pid = <0>;
454 qcom,remote-pid = <1>; 407 qcom,remote-pid = <1>;
455 408
456 modem_smp2p_out: master-kernel 409 modem_smp2p_out: master-kernel {
457 qcom,entry-name = "mas 410 qcom,entry-name = "master-kernel";
458 #qcom,smem-state-cells 411 #qcom,smem-state-cells = <1>;
459 }; 412 };
460 413
461 modem_smp2p_in: slave-kernel { 414 modem_smp2p_in: slave-kernel {
462 qcom,entry-name = "sla 415 qcom,entry-name = "slave-kernel";
463 interrupt-controller; 416 interrupt-controller;
464 #interrupt-cells = <2> 417 #interrupt-cells = <2>;
465 }; 418 };
466 }; 419 };
467 420
468 smp2p-slpi { 421 smp2p-slpi {
469 compatible = "qcom,smp2p"; 422 compatible = "qcom,smp2p";
470 qcom,smem = <481>, <430>; 423 qcom,smem = <481>, <430>;
471 interrupts = <GIC_SPI 178 IRQ_ 424 interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
472 mboxes = <&apcs_glb 26>; 425 mboxes = <&apcs_glb 26>;
473 qcom,local-pid = <0>; 426 qcom,local-pid = <0>;
474 qcom,remote-pid = <3>; 427 qcom,remote-pid = <3>;
475 428
476 slpi_smp2p_out: master-kernel 429 slpi_smp2p_out: master-kernel {
477 qcom,entry-name = "mas 430 qcom,entry-name = "master-kernel";
478 #qcom,smem-state-cells 431 #qcom,smem-state-cells = <1>;
479 }; 432 };
480 433
481 slpi_smp2p_in: slave-kernel { 434 slpi_smp2p_in: slave-kernel {
482 qcom,entry-name = "sla 435 qcom,entry-name = "slave-kernel";
483 interrupt-controller; 436 interrupt-controller;
484 #interrupt-cells = <2> 437 #interrupt-cells = <2>;
485 }; 438 };
486 }; 439 };
487 440
488 thermal-zones { 441 thermal-zones {
489 cpu0-thermal { 442 cpu0-thermal {
490 polling-delay-passive 443 polling-delay-passive = <250>;
>> 444 polling-delay = <1000>;
491 445
492 thermal-sensors = <&ts 446 thermal-sensors = <&tsens0 1>;
493 447
494 trips { 448 trips {
495 cpu0_alert0: t !! 449 cpu0_alert0: trip-point@0 {
496 temper 450 temperature = <75000>;
497 hyster 451 hysteresis = <2000>;
498 type = 452 type = "passive";
499 }; 453 };
500 454
501 cpu0_crit: cpu !! 455 cpu0_crit: cpu_crit {
502 temper 456 temperature = <110000>;
503 hyster 457 hysteresis = <2000>;
504 type = 458 type = "critical";
505 }; 459 };
506 }; 460 };
507 }; 461 };
508 462
509 cpu1-thermal { 463 cpu1-thermal {
510 polling-delay-passive 464 polling-delay-passive = <250>;
>> 465 polling-delay = <1000>;
511 466
512 thermal-sensors = <&ts 467 thermal-sensors = <&tsens0 2>;
513 468
514 trips { 469 trips {
515 cpu1_alert0: t !! 470 cpu1_alert0: trip-point@0 {
516 temper 471 temperature = <75000>;
517 hyster 472 hysteresis = <2000>;
518 type = 473 type = "passive";
519 }; 474 };
520 475
521 cpu1_crit: cpu !! 476 cpu1_crit: cpu_crit {
522 temper 477 temperature = <110000>;
523 hyster 478 hysteresis = <2000>;
524 type = 479 type = "critical";
525 }; 480 };
526 }; 481 };
527 }; 482 };
528 483
529 cpu2-thermal { 484 cpu2-thermal {
530 polling-delay-passive 485 polling-delay-passive = <250>;
>> 486 polling-delay = <1000>;
531 487
532 thermal-sensors = <&ts 488 thermal-sensors = <&tsens0 3>;
533 489
534 trips { 490 trips {
535 cpu2_alert0: t !! 491 cpu2_alert0: trip-point@0 {
536 temper 492 temperature = <75000>;
537 hyster 493 hysteresis = <2000>;
538 type = 494 type = "passive";
539 }; 495 };
540 496
541 cpu2_crit: cpu !! 497 cpu2_crit: cpu_crit {
542 temper 498 temperature = <110000>;
543 hyster 499 hysteresis = <2000>;
544 type = 500 type = "critical";
545 }; 501 };
546 }; 502 };
547 }; 503 };
548 504
549 cpu3-thermal { 505 cpu3-thermal {
550 polling-delay-passive 506 polling-delay-passive = <250>;
>> 507 polling-delay = <1000>;
551 508
552 thermal-sensors = <&ts 509 thermal-sensors = <&tsens0 4>;
553 510
554 trips { 511 trips {
555 cpu3_alert0: t !! 512 cpu3_alert0: trip-point@0 {
556 temper 513 temperature = <75000>;
557 hyster 514 hysteresis = <2000>;
558 type = 515 type = "passive";
559 }; 516 };
560 517
561 cpu3_crit: cpu !! 518 cpu3_crit: cpu_crit {
562 temper 519 temperature = <110000>;
563 hyster 520 hysteresis = <2000>;
564 type = 521 type = "critical";
565 }; 522 };
566 }; 523 };
567 }; 524 };
568 525
569 cpu4-thermal { 526 cpu4-thermal {
570 polling-delay-passive 527 polling-delay-passive = <250>;
>> 528 polling-delay = <1000>;
571 529
572 thermal-sensors = <&ts 530 thermal-sensors = <&tsens0 7>;
573 531
574 trips { 532 trips {
575 cpu4_alert0: t !! 533 cpu4_alert0: trip-point@0 {
576 temper 534 temperature = <75000>;
577 hyster 535 hysteresis = <2000>;
578 type = 536 type = "passive";
579 }; 537 };
580 538
581 cpu4_crit: cpu !! 539 cpu4_crit: cpu_crit {
582 temper 540 temperature = <110000>;
583 hyster 541 hysteresis = <2000>;
584 type = 542 type = "critical";
585 }; 543 };
586 }; 544 };
587 }; 545 };
588 546
589 cpu5-thermal { 547 cpu5-thermal {
590 polling-delay-passive 548 polling-delay-passive = <250>;
>> 549 polling-delay = <1000>;
591 550
592 thermal-sensors = <&ts 551 thermal-sensors = <&tsens0 8>;
593 552
594 trips { 553 trips {
595 cpu5_alert0: t !! 554 cpu5_alert0: trip-point@0 {
596 temper 555 temperature = <75000>;
597 hyster 556 hysteresis = <2000>;
598 type = 557 type = "passive";
599 }; 558 };
600 559
601 cpu5_crit: cpu !! 560 cpu5_crit: cpu_crit {
602 temper 561 temperature = <110000>;
603 hyster 562 hysteresis = <2000>;
604 type = 563 type = "critical";
605 }; 564 };
606 }; 565 };
607 }; 566 };
608 567
609 cpu6-thermal { 568 cpu6-thermal {
610 polling-delay-passive 569 polling-delay-passive = <250>;
>> 570 polling-delay = <1000>;
611 571
612 thermal-sensors = <&ts 572 thermal-sensors = <&tsens0 9>;
613 573
614 trips { 574 trips {
615 cpu6_alert0: t !! 575 cpu6_alert0: trip-point@0 {
616 temper 576 temperature = <75000>;
617 hyster 577 hysteresis = <2000>;
618 type = 578 type = "passive";
619 }; 579 };
620 580
621 cpu6_crit: cpu !! 581 cpu6_crit: cpu_crit {
622 temper 582 temperature = <110000>;
623 hyster 583 hysteresis = <2000>;
624 type = 584 type = "critical";
625 }; 585 };
626 }; 586 };
627 }; 587 };
628 588
629 cpu7-thermal { 589 cpu7-thermal {
630 polling-delay-passive 590 polling-delay-passive = <250>;
>> 591 polling-delay = <1000>;
631 592
632 thermal-sensors = <&ts 593 thermal-sensors = <&tsens0 10>;
633 594
634 trips { 595 trips {
635 cpu7_alert0: t !! 596 cpu7_alert0: trip-point@0 {
636 temper 597 temperature = <75000>;
637 hyster 598 hysteresis = <2000>;
638 type = 599 type = "passive";
639 }; 600 };
640 601
641 cpu7_crit: cpu !! 602 cpu7_crit: cpu_crit {
642 temper 603 temperature = <110000>;
643 hyster 604 hysteresis = <2000>;
644 type = 605 type = "critical";
645 }; 606 };
646 }; 607 };
647 }; 608 };
648 609
649 gpu-bottom-thermal { !! 610 gpu-thermal-bottom {
650 polling-delay-passive 611 polling-delay-passive = <250>;
>> 612 polling-delay = <1000>;
651 613
652 thermal-sensors = <&ts 614 thermal-sensors = <&tsens0 12>;
653 615
654 trips { 616 trips {
655 gpu1_alert0: t !! 617 gpu1_alert0: trip-point@0 {
656 temper 618 temperature = <90000>;
657 hyster 619 hysteresis = <2000>;
658 type = 620 type = "hot";
659 }; 621 };
660 }; 622 };
661 }; 623 };
662 624
663 gpu-top-thermal { !! 625 gpu-thermal-top {
664 polling-delay-passive 626 polling-delay-passive = <250>;
>> 627 polling-delay = <1000>;
665 628
666 thermal-sensors = <&ts 629 thermal-sensors = <&tsens0 13>;
667 630
668 trips { 631 trips {
669 gpu2_alert0: t !! 632 gpu2_alert0: trip-point@0 {
670 temper 633 temperature = <90000>;
671 hyster 634 hysteresis = <2000>;
672 type = 635 type = "hot";
673 }; 636 };
674 }; 637 };
675 }; 638 };
676 639
677 clust0-mhm-thermal { 640 clust0-mhm-thermal {
678 polling-delay-passive 641 polling-delay-passive = <250>;
>> 642 polling-delay = <1000>;
679 643
680 thermal-sensors = <&ts 644 thermal-sensors = <&tsens0 5>;
681 645
682 trips { 646 trips {
683 cluster0_mhm_a !! 647 cluster0_mhm_alert0: trip-point@0 {
684 temper 648 temperature = <90000>;
685 hyster 649 hysteresis = <2000>;
686 type = 650 type = "hot";
687 }; 651 };
688 }; 652 };
689 }; 653 };
690 654
691 clust1-mhm-thermal { 655 clust1-mhm-thermal {
692 polling-delay-passive 656 polling-delay-passive = <250>;
>> 657 polling-delay = <1000>;
693 658
694 thermal-sensors = <&ts 659 thermal-sensors = <&tsens0 6>;
695 660
696 trips { 661 trips {
697 cluster1_mhm_a !! 662 cluster1_mhm_alert0: trip-point@0 {
698 temper 663 temperature = <90000>;
699 hyster 664 hysteresis = <2000>;
700 type = 665 type = "hot";
701 }; 666 };
702 }; 667 };
703 }; 668 };
704 669
705 cluster1-l2-thermal { 670 cluster1-l2-thermal {
706 polling-delay-passive 671 polling-delay-passive = <250>;
>> 672 polling-delay = <1000>;
707 673
708 thermal-sensors = <&ts 674 thermal-sensors = <&tsens0 11>;
709 675
710 trips { 676 trips {
711 cluster1_l2_al !! 677 cluster1_l2_alert0: trip-point@0 {
712 temper 678 temperature = <90000>;
713 hyster 679 hysteresis = <2000>;
714 type = 680 type = "hot";
715 }; 681 };
716 }; 682 };
717 }; 683 };
718 684
719 modem-thermal { 685 modem-thermal {
720 polling-delay-passive 686 polling-delay-passive = <250>;
>> 687 polling-delay = <1000>;
721 688
722 thermal-sensors = <&ts 689 thermal-sensors = <&tsens1 1>;
723 690
724 trips { 691 trips {
725 modem_alert0: !! 692 modem_alert0: trip-point@0 {
726 temper 693 temperature = <90000>;
727 hyster 694 hysteresis = <2000>;
728 type = 695 type = "hot";
729 }; 696 };
730 }; 697 };
731 }; 698 };
732 699
733 mem-thermal { 700 mem-thermal {
734 polling-delay-passive 701 polling-delay-passive = <250>;
>> 702 polling-delay = <1000>;
735 703
736 thermal-sensors = <&ts 704 thermal-sensors = <&tsens1 2>;
737 705
738 trips { 706 trips {
739 mem_alert0: tr !! 707 mem_alert0: trip-point@0 {
740 temper 708 temperature = <90000>;
741 hyster 709 hysteresis = <2000>;
742 type = 710 type = "hot";
743 }; 711 };
744 }; 712 };
745 }; 713 };
746 714
747 wlan-thermal { 715 wlan-thermal {
748 polling-delay-passive 716 polling-delay-passive = <250>;
>> 717 polling-delay = <1000>;
749 718
750 thermal-sensors = <&ts 719 thermal-sensors = <&tsens1 3>;
751 720
752 trips { 721 trips {
753 wlan_alert0: t !! 722 wlan_alert0: trip-point@0 {
754 temper 723 temperature = <90000>;
755 hyster 724 hysteresis = <2000>;
756 type = 725 type = "hot";
757 }; 726 };
758 }; 727 };
759 }; 728 };
760 729
761 q6-dsp-thermal { 730 q6-dsp-thermal {
762 polling-delay-passive 731 polling-delay-passive = <250>;
>> 732 polling-delay = <1000>;
763 733
764 thermal-sensors = <&ts 734 thermal-sensors = <&tsens1 4>;
765 735
766 trips { 736 trips {
767 q6_dsp_alert0: !! 737 q6_dsp_alert0: trip-point@0 {
768 temper 738 temperature = <90000>;
769 hyster 739 hysteresis = <2000>;
770 type = 740 type = "hot";
771 }; 741 };
772 }; 742 };
773 }; 743 };
774 744
775 camera-thermal { 745 camera-thermal {
776 polling-delay-passive 746 polling-delay-passive = <250>;
>> 747 polling-delay = <1000>;
777 748
778 thermal-sensors = <&ts 749 thermal-sensors = <&tsens1 5>;
779 750
780 trips { 751 trips {
781 camera_alert0: !! 752 camera_alert0: trip-point@0 {
782 temper 753 temperature = <90000>;
783 hyster 754 hysteresis = <2000>;
784 type = 755 type = "hot";
785 }; 756 };
786 }; 757 };
787 }; 758 };
788 759
789 multimedia-thermal { 760 multimedia-thermal {
790 polling-delay-passive 761 polling-delay-passive = <250>;
>> 762 polling-delay = <1000>;
791 763
792 thermal-sensors = <&ts 764 thermal-sensors = <&tsens1 6>;
793 765
794 trips { 766 trips {
795 multimedia_ale !! 767 multimedia_alert0: trip-point@0 {
796 temper 768 temperature = <90000>;
797 hyster 769 hysteresis = <2000>;
798 type = 770 type = "hot";
799 }; 771 };
800 }; 772 };
801 }; 773 };
802 }; 774 };
803 775
804 timer { 776 timer {
805 compatible = "arm,armv8-timer" 777 compatible = "arm,armv8-timer";
806 interrupts = <GIC_PPI 1 IRQ_TY 778 interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
807 <GIC_PPI 2 IRQ_TY 779 <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
808 <GIC_PPI 3 IRQ_TY 780 <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
809 <GIC_PPI 0 IRQ_TY 781 <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
810 }; 782 };
811 783
812 soc: soc@0 { !! 784 soc: soc {
813 #address-cells = <1>; 785 #address-cells = <1>;
814 #size-cells = <1>; 786 #size-cells = <1>;
815 ranges = <0 0 0 0xffffffff>; 787 ranges = <0 0 0 0xffffffff>;
816 compatible = "simple-bus"; 788 compatible = "simple-bus";
817 789
818 gcc: clock-controller@100000 { 790 gcc: clock-controller@100000 {
819 compatible = "qcom,gcc 791 compatible = "qcom,gcc-msm8998";
820 #clock-cells = <1>; 792 #clock-cells = <1>;
821 #reset-cells = <1>; 793 #reset-cells = <1>;
822 #power-domain-cells = 794 #power-domain-cells = <1>;
823 reg = <0x00100000 0xb0 795 reg = <0x00100000 0xb0000>;
824 <<
825 clock-names = "xo", "s <<
826 clocks = <&rpmcc RPM_S <<
827 <<
828 /* <<
829 * The hypervisor typi <<
830 * reside as read-only <<
831 * these clocks on a d <<
832 * enabled but unused <<
833 * to reboot. <<
834 * In light of that, w <<
835 * as protected. The b <<
836 * list of protected c <<
837 * desired for the HLO <<
838 */ <<
839 protected-clocks = <AG <<
840 <SS <<
841 <SS <<
842 }; 796 };
843 797
844 rpm_msg_ram: sram@778000 { !! 798 rpm_msg_ram: memory@778000 {
845 compatible = "qcom,rpm 799 compatible = "qcom,rpm-msg-ram";
846 reg = <0x00778000 0x70 800 reg = <0x00778000 0x7000>;
847 }; 801 };
848 802
849 qfprom: qfprom@784000 { !! 803 qfprom: qfprom@780000 {
850 compatible = "qcom,msm !! 804 compatible = "qcom,qfprom";
851 reg = <0x00784000 0x62 !! 805 reg = <0x00780000 0x621c>;
852 #address-cells = <1>; 806 #address-cells = <1>;
853 #size-cells = <1>; 807 #size-cells = <1>;
854 808
855 qusb2_hstx_trim: hstx- !! 809 qusb2_hstx_trim: hstx-trim@423a {
856 reg = <0x23a 0 !! 810 reg = <0x423a 0x1>;
857 bits = <0 4>; 811 bits = <0 4>;
858 }; 812 };
859 }; 813 };
860 814
861 tsens0: thermal@10ab000 { 815 tsens0: thermal@10ab000 {
862 compatible = "qcom,msm 816 compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
863 reg = <0x010ab000 0x10 817 reg = <0x010ab000 0x1000>, /* TM */
864 <0x010aa000 0x10 818 <0x010aa000 0x1000>; /* SROT */
865 #qcom,sensors = <14>; 819 #qcom,sensors = <14>;
866 interrupts = <GIC_SPI !! 820 interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
867 <GIC_SPI !! 821 interrupt-names = "uplow";
868 interrupt-names = "upl <<
869 #thermal-sensor-cells 822 #thermal-sensor-cells = <1>;
870 }; 823 };
871 824
872 tsens1: thermal@10ae000 { 825 tsens1: thermal@10ae000 {
873 compatible = "qcom,msm 826 compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
874 reg = <0x010ae000 0x10 827 reg = <0x010ae000 0x1000>, /* TM */
875 <0x010ad000 0x10 828 <0x010ad000 0x1000>; /* SROT */
876 #qcom,sensors = <8>; 829 #qcom,sensors = <8>;
877 interrupts = <GIC_SPI !! 830 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
878 <GIC_SPI !! 831 interrupt-names = "uplow";
879 interrupt-names = "upl <<
880 #thermal-sensor-cells 832 #thermal-sensor-cells = <1>;
881 }; 833 };
882 834
883 anoc1_smmu: iommu@1680000 { 835 anoc1_smmu: iommu@1680000 {
884 compatible = "qcom,msm 836 compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
885 reg = <0x01680000 0x10 837 reg = <0x01680000 0x10000>;
886 #iommu-cells = <1>; 838 #iommu-cells = <1>;
887 839
888 #global-interrupts = < 840 #global-interrupts = <0>;
889 interrupts = 841 interrupts =
890 <GIC_SPI 364 I 842 <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
891 <GIC_SPI 365 I 843 <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
892 <GIC_SPI 366 I 844 <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
893 <GIC_SPI 367 I 845 <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
894 <GIC_SPI 368 I 846 <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
895 <GIC_SPI 369 I 847 <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
896 }; 848 };
897 849
898 anoc2_smmu: iommu@16c0000 { !! 850 pcie0: pci@1c00000 {
899 compatible = "qcom,msm !! 851 compatible = "qcom,pcie-msm8996";
900 reg = <0x016c0000 0x40 !! 852 reg = <0x01c00000 0x2000>,
901 #iommu-cells = <1>; !! 853 <0x1b000000 0xf1d>,
902 !! 854 <0x1b000f20 0xa8>,
903 #global-interrupts = < !! 855 <0x1b100000 0x100000>;
904 interrupts = <<
905 <GIC_SPI 373 I <<
906 <GIC_SPI 374 I <<
907 <GIC_SPI 375 I <<
908 <GIC_SPI 376 I <<
909 <GIC_SPI 377 I <<
910 <GIC_SPI 378 I <<
911 <GIC_SPI 462 I <<
912 <GIC_SPI 463 I <<
913 <GIC_SPI 464 I <<
914 <GIC_SPI 465 I <<
915 }; <<
916 <<
917 pcie0: pcie@1c00000 { <<
918 compatible = "qcom,pci <<
919 reg = <0x01c00000 0x20 <<
920 <0x1b000000 0xf1 <<
921 <0x1b000f20 0xa8 <<
922 <0x1b100000 0x10 <<
923 reg-names = "parf", "d 856 reg-names = "parf", "dbi", "elbi", "config";
924 device_type = "pci"; 857 device_type = "pci";
925 linux,pci-domain = <0> 858 linux,pci-domain = <0>;
926 bus-range = <0x00 0xff 859 bus-range = <0x00 0xff>;
927 #address-cells = <3>; 860 #address-cells = <3>;
928 #size-cells = <2>; 861 #size-cells = <2>;
929 num-lanes = <1>; 862 num-lanes = <1>;
930 phys = <&pcie_phy>; !! 863 phys = <&pciephy>;
931 phy-names = "pciephy"; 864 phy-names = "pciephy";
932 status = "disabled"; <<
933 865
934 ranges = <0x01000000 0 !! 866 ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>,
935 <0x02000000 0 867 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
936 868
937 #interrupt-cells = <1> 869 #interrupt-cells = <1>;
938 interrupts = <GIC_SPI 870 interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
939 interrupt-names = "msi 871 interrupt-names = "msi";
940 interrupt-map-mask = < 872 interrupt-map-mask = <0 0 0 0x7>;
941 interrupt-map = <0 0 0 !! 873 interrupt-map = <0 0 0 1 &intc 0 135 IRQ_TYPE_LEVEL_HIGH>,
942 <0 0 0 !! 874 <0 0 0 2 &intc 0 136 IRQ_TYPE_LEVEL_HIGH>,
943 <0 0 0 !! 875 <0 0 0 3 &intc 0 138 IRQ_TYPE_LEVEL_HIGH>,
944 <0 0 0 !! 876 <0 0 0 4 &intc 0 139 IRQ_TYPE_LEVEL_HIGH>;
945 877
946 clocks = <&gcc GCC_PCI 878 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
947 <&gcc GCC_PCI <<
948 <&gcc GCC_PCI <<
949 <&gcc GCC_PCI 879 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
950 <&gcc GCC_PCI !! 880 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
951 clock-names = "pipe", !! 881 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
>> 882 <&gcc GCC_PCIE_0_AUX_CLK>;
>> 883 clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux";
952 884
953 power-domains = <&gcc 885 power-domains = <&gcc PCIE_0_GDSC>;
954 iommu-map = <0x100 &an 886 iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
955 perst-gpios = <&tlmm 3 887 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
956 <<
957 pcie@0 { <<
958 device_type = <<
959 reg = <0x0 0x0 <<
960 bus-range = <0 <<
961 <<
962 #address-cells <<
963 #size-cells = <<
964 ranges; <<
965 }; <<
966 }; 888 };
967 889
968 pcie_phy: phy@1c06000 { !! 890 phy@1c06000 {
969 compatible = "qcom,msm 891 compatible = "qcom,msm8998-qmp-pcie-phy";
970 reg = <0x01c06000 0x10 !! 892 reg = <0x01c06000 0x18c>;
971 status = "disabled"; !! 893 #address-cells = <1>;
>> 894 #size-cells = <1>;
>> 895 ranges;
972 896
973 clocks = <&gcc GCC_PCI 897 clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
974 <&gcc GCC_PCI 898 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
975 <&gcc GCC_PCI !! 899 <&gcc GCC_PCIE_CLKREF_CLK>;
976 <&gcc GCC_PCI !! 900 clock-names = "aux", "cfg_ahb", "ref";
977 clock-names = "aux", <<
978 "cfg_ahb <<
979 "ref", <<
980 "pipe"; <<
981 <<
982 clock-output-names = " <<
983 #clock-cells = <0>; <<
984 <<
985 #phy-cells = <0>; <<
986 901
987 resets = <&gcc GCC_PCI 902 resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
988 reset-names = "phy", " 903 reset-names = "phy", "common";
989 904
990 vdda-phy-supply = <&vr 905 vdda-phy-supply = <&vreg_l1a_0p875>;
991 vdda-pll-supply = <&vr 906 vdda-pll-supply = <&vreg_l2a_1p2>;
>> 907
>> 908 pciephy: lane@1c06800 {
>> 909 reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
>> 910 #phy-cells = <0>;
>> 911
>> 912 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
>> 913 clock-names = "pipe0";
>> 914 clock-output-names = "pcie_0_pipe_clk_src";
>> 915 #clock-cells = <0>;
>> 916 };
992 }; 917 };
993 918
994 ufshc: ufshc@1da4000 { 919 ufshc: ufshc@1da4000 {
995 compatible = "qcom,msm 920 compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
996 reg = <0x01da4000 0x25 921 reg = <0x01da4000 0x2500>;
997 interrupts = <GIC_SPI 922 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
998 phys = <&ufsphy>; !! 923 phys = <&ufsphy_lanes>;
999 phy-names = "ufsphy"; 924 phy-names = "ufsphy";
1000 lanes-per-direction = 925 lanes-per-direction = <2>;
1001 power-domains = <&gcc 926 power-domains = <&gcc UFS_GDSC>;
1002 status = "disabled"; <<
1003 #reset-cells = <1>; 927 #reset-cells = <1>;
1004 928
1005 clock-names = 929 clock-names =
1006 "core_clk", 930 "core_clk",
1007 "bus_aggr_clk 931 "bus_aggr_clk",
1008 "iface_clk", 932 "iface_clk",
1009 "core_clk_uni 933 "core_clk_unipro",
1010 "ref_clk", 934 "ref_clk",
1011 "tx_lane0_syn 935 "tx_lane0_sync_clk",
1012 "rx_lane0_syn 936 "rx_lane0_sync_clk",
1013 "rx_lane1_syn 937 "rx_lane1_sync_clk";
1014 clocks = 938 clocks =
1015 <&gcc GCC_UFS 939 <&gcc GCC_UFS_AXI_CLK>,
1016 <&gcc GCC_AGG 940 <&gcc GCC_AGGRE1_UFS_AXI_CLK>,
1017 <&gcc GCC_UFS 941 <&gcc GCC_UFS_AHB_CLK>,
1018 <&gcc GCC_UFS 942 <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
1019 <&rpmcc RPM_S 943 <&rpmcc RPM_SMD_LN_BB_CLK1>,
1020 <&gcc GCC_UFS 944 <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
1021 <&gcc GCC_UFS 945 <&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
1022 <&gcc GCC_UFS 946 <&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
1023 freq-table-hz = 947 freq-table-hz =
1024 <50000000 200 948 <50000000 200000000>,
1025 <0 0>, 949 <0 0>,
1026 <0 0>, 950 <0 0>,
1027 <37500000 150 951 <37500000 150000000>,
1028 <0 0>, 952 <0 0>,
1029 <0 0>, 953 <0 0>,
1030 <0 0>, 954 <0 0>,
1031 <0 0>; 955 <0 0>;
1032 956
1033 resets = <&gcc GCC_UF 957 resets = <&gcc GCC_UFS_BCR>;
1034 reset-names = "rst"; 958 reset-names = "rst";
1035 }; 959 };
1036 960
1037 ufsphy: phy@1da7000 { 961 ufsphy: phy@1da7000 {
1038 compatible = "qcom,ms 962 compatible = "qcom,msm8998-qmp-ufs-phy";
1039 reg = <0x01da7000 0x1 !! 963 reg = <0x01da7000 0x18c>;
>> 964 #address-cells = <1>;
>> 965 #size-cells = <1>;
>> 966 ranges;
1040 967
1041 clocks = <&rpmcc RPM_ !! 968 clock-names =
1042 <&gcc GCC_UF !! 969 "ref",
1043 <&gcc GCC_UF !! 970 "ref_aux";
1044 clock-names = "ref", !! 971 clocks =
1045 "ref_au !! 972 <&gcc GCC_UFS_CLKREF_CLK>,
1046 "qref"; !! 973 <&gcc GCC_UFS_PHY_AUX_CLK>;
1047 974
1048 reset-names = "ufsphy 975 reset-names = "ufsphy";
1049 resets = <&ufshc 0>; 976 resets = <&ufshc 0>;
1050 977
1051 #phy-cells = <0>; !! 978 ufsphy_lanes: lanes@1da7400 {
1052 status = "disabled"; !! 979 reg = <0x01da7400 0x128>,
1053 }; !! 980 <0x01da7600 0x1fc>,
1054 !! 981 <0x01da7c00 0x1dc>,
1055 tcsr_mutex: hwlock@1f40000 { !! 982 <0x01da7800 0x128>,
1056 compatible = "qcom,tc !! 983 <0x01da7a00 0x1fc>;
1057 reg = <0x01f40000 0x2 !! 984 #phy-cells = <0>;
1058 #hwlock-cells = <1>; !! 985 };
1059 }; <<
1060 <<
1061 tcsr_regs_1: syscon@1f60000 { <<
1062 compatible = "qcom,ms <<
1063 reg = <0x01f60000 0x2 <<
1064 }; 986 };
1065 987
1066 tcsr_regs_2: syscon@1fc0000 { !! 988 tcsr_mutex_regs: syscon@1f40000 {
1067 compatible = "qcom,ms !! 989 compatible = "syscon";
1068 reg = <0x01fc0000 0x2 !! 990 reg = <0x01f40000 0x40000>;
1069 }; 991 };
1070 992
1071 tlmm: pinctrl@3400000 { 993 tlmm: pinctrl@3400000 {
1072 compatible = "qcom,ms 994 compatible = "qcom,msm8998-pinctrl";
1073 reg = <0x03400000 0xc 995 reg = <0x03400000 0xc00000>;
1074 interrupts = <GIC_SPI 996 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1075 gpio-ranges = <&tlmm <<
1076 gpio-controller; 997 gpio-controller;
1077 #gpio-cells = <2>; !! 998 #gpio-cells = <0x2>;
1078 interrupt-controller; 999 interrupt-controller;
1079 #interrupt-cells = <2 !! 1000 #interrupt-cells = <0x2>;
1080 <<
1081 sdc2_on: sdc2-on-stat <<
1082 clk-pins { <<
1083 pins <<
1084 drive <<
1085 bias- <<
1086 }; <<
1087 <<
1088 cmd-pins { <<
1089 pins <<
1090 drive <<
1091 bias- <<
1092 }; <<
1093 <<
1094 data-pins { <<
1095 pins <<
1096 drive <<
1097 bias- <<
1098 }; <<
1099 }; <<
1100 <<
1101 sdc2_off: sdc2-off-st <<
1102 clk-pins { <<
1103 pins <<
1104 drive <<
1105 bias- <<
1106 }; <<
1107 <<
1108 cmd-pins { <<
1109 pins <<
1110 drive <<
1111 bias- <<
1112 }; <<
1113 <<
1114 data-pins { <<
1115 pins <<
1116 drive <<
1117 bias- <<
1118 }; <<
1119 }; <<
1120 <<
1121 sdc2_cd: sdc2-cd-stat <<
1122 pins = "gpio9 <<
1123 function = "g <<
1124 bias-pull-up; <<
1125 drive-strengt <<
1126 }; <<
1127 <<
1128 blsp1_uart3_on: blsp1 <<
1129 tx-pins { <<
1130 pins <<
1131 funct <<
1132 drive <<
1133 bias- <<
1134 }; <<
1135 <<
1136 rx-pins { <<
1137 pins <<
1138 funct <<
1139 drive <<
1140 bias- <<
1141 }; <<
1142 <<
1143 cts-pins { <<
1144 pins <<
1145 funct <<
1146 drive <<
1147 bias- <<
1148 }; <<
1149 <<
1150 rfr-pins { <<
1151 pins <<
1152 funct <<
1153 drive <<
1154 bias- <<
1155 }; <<
1156 }; <<
1157 <<
1158 blsp1_i2c1_default: b <<
1159 pins = "gpio2 <<
1160 function = "b <<
1161 drive-strengt <<
1162 bias-disable; <<
1163 }; <<
1164 <<
1165 blsp1_i2c1_sleep: bls <<
1166 pins = "gpio2 <<
1167 function = "b <<
1168 drive-strengt <<
1169 bias-pull-up; <<
1170 }; <<
1171 <<
1172 blsp1_i2c2_default: b <<
1173 pins = "gpio3 <<
1174 function = "b <<
1175 drive-strengt <<
1176 bias-disable; <<
1177 }; <<
1178 <<
1179 blsp1_i2c2_sleep: bls <<
1180 pins = "gpio3 <<
1181 function = "b <<
1182 drive-strengt <<
1183 bias-pull-up; <<
1184 }; <<
1185 <<
1186 blsp1_i2c3_default: b <<
1187 pins = "gpio4 <<
1188 function = "b <<
1189 drive-strengt <<
1190 bias-disable; <<
1191 }; <<
1192 <<
1193 blsp1_i2c3_sleep: bls <<
1194 pins = "gpio4 <<
1195 function = "b <<
1196 drive-strengt <<
1197 bias-pull-up; <<
1198 }; <<
1199 <<
1200 blsp1_i2c4_default: b <<
1201 pins = "gpio1 <<
1202 function = "b <<
1203 drive-strengt <<
1204 bias-disable; <<
1205 }; <<
1206 <<
1207 blsp1_i2c4_sleep: bls <<
1208 pins = "gpio1 <<
1209 function = "b <<
1210 drive-strengt <<
1211 bias-pull-up; <<
1212 }; <<
1213 <<
1214 blsp1_i2c5_default: b <<
1215 pins = "gpio8 <<
1216 function = "b <<
1217 drive-strengt <<
1218 bias-disable; <<
1219 }; <<
1220 <<
1221 blsp1_i2c5_sleep: bls <<
1222 pins = "gpio8 <<
1223 function = "b <<
1224 drive-strengt <<
1225 bias-pull-up; <<
1226 }; <<
1227 <<
1228 blsp1_i2c6_default: b <<
1229 pins = "gpio4 <<
1230 function = "b <<
1231 drive-strengt <<
1232 bias-disable; <<
1233 }; <<
1234 <<
1235 blsp1_i2c6_sleep: bls <<
1236 pins = "gpio4 <<
1237 function = "b <<
1238 drive-strengt <<
1239 bias-pull-up; <<
1240 }; <<
1241 <<
1242 blsp1_spi_b_default: <<
1243 pins = "gpio2 <<
1244 function = "b <<
1245 drive-strengt <<
1246 bias-disable; <<
1247 }; <<
1248 <<
1249 blsp1_spi1_default: b <<
1250 pins = "gpio0 <<
1251 function = "b <<
1252 drive-strengt <<
1253 bias-disable; <<
1254 }; <<
1255 <<
1256 blsp1_spi2_default: b <<
1257 pins = "gpio3 <<
1258 function = "b <<
1259 drive-strengt <<
1260 bias-disable; <<
1261 }; <<
1262 <<
1263 blsp1_spi3_default: b <<
1264 pins = "gpio4 <<
1265 function = "b <<
1266 drive-strengt <<
1267 bias-disable; <<
1268 }; <<
1269 <<
1270 blsp1_spi4_default: b <<
1271 pins = "gpio8 <<
1272 function = "b <<
1273 drive-strengt <<
1274 bias-disable; <<
1275 }; <<
1276 <<
1277 blsp1_spi5_default: b <<
1278 pins = "gpio8 <<
1279 function = "b <<
1280 drive-strengt <<
1281 bias-disable; <<
1282 }; <<
1283 <<
1284 blsp1_spi6_default: b <<
1285 pins = "gpio4 <<
1286 function = "b <<
1287 drive-strengt <<
1288 bias-disable; <<
1289 }; <<
1290 <<
1291 <<
1292 /* 6 interfaces per Q <<
1293 blsp2_i2c1_default: b <<
1294 pins = "gpio5 <<
1295 function = "b <<
1296 drive-strengt <<
1297 bias-disable; <<
1298 }; <<
1299 <<
1300 blsp2_i2c1_sleep: bls <<
1301 pins = "gpio5 <<
1302 function = "b <<
1303 drive-strengt <<
1304 bias-pull-up; <<
1305 }; <<
1306 <<
1307 blsp2_i2c2_default: b <<
1308 pins = "gpio6 <<
1309 function = "b <<
1310 drive-strengt <<
1311 bias-disable; <<
1312 }; <<
1313 <<
1314 blsp2_i2c2_sleep: bls <<
1315 pins = "gpio6 <<
1316 function = "b <<
1317 drive-strengt <<
1318 bias-pull-up; <<
1319 }; <<
1320 <<
1321 blsp2_i2c3_default: b <<
1322 pins = "gpio5 <<
1323 function = "b <<
1324 drive-strengt <<
1325 bias-disable; <<
1326 }; <<
1327 <<
1328 blsp2_i2c3_sleep: bls <<
1329 pins = "gpio5 <<
1330 function = "b <<
1331 drive-strengt <<
1332 bias-pull-up; <<
1333 }; <<
1334 <<
1335 blsp2_i2c4_default: b <<
1336 pins = "gpio6 <<
1337 function = "b <<
1338 drive-strengt <<
1339 bias-disable; <<
1340 }; <<
1341 <<
1342 blsp2_i2c4_sleep: bls <<
1343 pins = "gpio6 <<
1344 function = "b <<
1345 drive-strengt <<
1346 bias-pull-up; <<
1347 }; <<
1348 <<
1349 blsp2_i2c5_default: b <<
1350 pins = "gpio6 <<
1351 function = "b <<
1352 drive-strengt <<
1353 bias-disable; <<
1354 }; <<
1355 <<
1356 blsp2_i2c5_sleep: bls <<
1357 pins = "gpio6 <<
1358 function = "b <<
1359 drive-strengt <<
1360 bias-pull-up; <<
1361 }; <<
1362 <<
1363 blsp2_i2c6_default: b <<
1364 pins = "gpio8 <<
1365 function = "b <<
1366 drive-strengt <<
1367 bias-disable; <<
1368 }; <<
1369 <<
1370 blsp2_i2c6_sleep: bls <<
1371 pins = "gpio8 <<
1372 function = "b <<
1373 drive-strengt <<
1374 bias-pull-up; <<
1375 }; <<
1376 <<
1377 blsp2_spi1_default: b <<
1378 pins = "gpio5 <<
1379 function = "b <<
1380 drive-strengt <<
1381 bias-disable; <<
1382 }; <<
1383 <<
1384 blsp2_spi2_default: b <<
1385 pins = "gpio4 <<
1386 function = "b <<
1387 drive-strengt <<
1388 bias-disable; <<
1389 }; <<
1390 <<
1391 blsp2_spi3_default: b <<
1392 pins = "gpio4 <<
1393 function = "b <<
1394 drive-strengt <<
1395 bias-disable; <<
1396 }; <<
1397 <<
1398 blsp2_spi4_default: b <<
1399 pins = "gpio6 <<
1400 function = "b <<
1401 drive-strengt <<
1402 bias-disable; <<
1403 }; <<
1404 <<
1405 blsp2_spi5_default: b <<
1406 pins = "gpio5 <<
1407 function = "b <<
1408 drive-strengt <<
1409 bias-disable; <<
1410 }; <<
1411 <<
1412 blsp2_spi6_default: b <<
1413 pins = "gpio8 <<
1414 function = "b <<
1415 drive-strengt <<
1416 bias-disable; <<
1417 }; <<
1418 }; <<
1419 <<
1420 remoteproc_mss: remoteproc@40 <<
1421 compatible = "qcom,ms <<
1422 reg = <0x04080000 0x1 <<
1423 reg-names = "qdsp6", <<
1424 <<
1425 interrupts-extended = <<
1426 <&intc GIC_SP <<
1427 <&modem_smp2p <<
1428 <&modem_smp2p <<
1429 <&modem_smp2p <<
1430 <&modem_smp2p <<
1431 <&modem_smp2p <<
1432 interrupt-names = "wd <<
1433 "ha <<
1434 "sh <<
1435 <<
1436 clocks = <&gcc GCC_MS <<
1437 <&gcc GCC_BI <<
1438 <&gcc GCC_BO <<
1439 <&gcc GCC_MS <<
1440 <&gcc GCC_MS <<
1441 <&gcc GCC_MS <<
1442 <&rpmcc RPM_ <<
1443 <&rpmcc RPM_ <<
1444 clock-names = "iface" <<
1445 "snoc_a <<
1446 <<
1447 qcom,smem-states = <& <<
1448 qcom,smem-state-names <<
1449 <<
1450 resets = <&gcc GCC_MS <<
1451 reset-names = "mss_re <<
1452 <<
1453 qcom,halt-regs = <&tc <<
1454 <<
1455 power-domains = <&rpm <<
1456 <&rpm <<
1457 power-domain-names = <<
1458 <<
1459 status = "disabled"; <<
1460 <<
1461 mba { <<
1462 memory-region <<
1463 }; <<
1464 <<
1465 mpss { <<
1466 memory-region <<
1467 }; <<
1468 <<
1469 metadata { <<
1470 memory-region <<
1471 }; <<
1472 <<
1473 glink-edge { <<
1474 interrupts = <<
1475 label = "mode <<
1476 qcom,remote-p <<
1477 mboxes = <&ap <<
1478 }; <<
1479 }; <<
1480 <<
1481 adreno_gpu: gpu@5000000 { <<
1482 compatible = "qcom,ad <<
1483 reg = <0x05000000 0x4 <<
1484 reg-names = "kgsl_3d0 <<
1485 <<
1486 clocks = <&gcc GCC_GP <<
1487 <&gpucc RBBMT <<
1488 <&gcc GCC_BIM <<
1489 <&gcc GCC_GPU <<
1490 <&gpucc RBCPR <<
1491 <&gpucc GFX3D <<
1492 clock-names = "iface" <<
1493 "rbbmtimer", <<
1494 "mem", <<
1495 "mem_iface", <<
1496 "rbcpr", <<
1497 "core"; <<
1498 <<
1499 interrupts = <GIC_SPI <<
1500 iommus = <&adreno_smm <<
1501 operating-points-v2 = <<
1502 power-domains = <&rpm <<
1503 status = "disabled"; <<
1504 <<
1505 gpu_opp_table: opp-ta <<
1506 compatible = <<
1507 opp-710000097 <<
1508 opp-h <<
1509 opp-l <<
1510 opp-s <<
1511 }; <<
1512 <<
1513 opp-670000048 <<
1514 opp-h <<
1515 opp-l <<
1516 opp-s <<
1517 }; <<
1518 <<
1519 opp-596000097 <<
1520 opp-h <<
1521 opp-l <<
1522 opp-s <<
1523 }; <<
1524 <<
1525 opp-515000097 <<
1526 opp-h <<
1527 opp-l <<
1528 opp-s <<
1529 }; <<
1530 <<
1531 opp-414000000 <<
1532 opp-h <<
1533 opp-l <<
1534 opp-s <<
1535 }; <<
1536 <<
1537 opp-342000000 <<
1538 opp-h <<
1539 opp-l <<
1540 opp-s <<
1541 }; <<
1542 <<
1543 opp-257000000 <<
1544 opp-h <<
1545 opp-l <<
1546 opp-s <<
1547 }; <<
1548 }; <<
1549 }; <<
1550 <<
1551 adreno_smmu: iommu@5040000 { <<
1552 compatible = "qcom,ms <<
1553 reg = <0x05040000 0x1 <<
1554 clocks = <&gcc GCC_GP <<
1555 <&gcc GCC_BI <<
1556 <&gcc GCC_GP <<
1557 clock-names = "iface" <<
1558 <<
1559 #global-interrupts = <<
1560 #iommu-cells = <1>; <<
1561 interrupts = <<
1562 <GIC_SPI 329 <<
1563 <GIC_SPI 330 <<
1564 <GIC_SPI 331 <<
1565 /* <<
1566 * GPU-GX GDSC's pare <<
1567 * GPU-CX for SMMU bu <<
1568 * Contemporarily, we <<
1569 * domain in the Adre <<
1570 * Enable GPU CX/GX G <<
1571 * SoC VDDMX RPM Powe <<
1572 */ <<
1573 power-domains = <&gpu <<
1574 }; <<
1575 <<
1576 gpucc: clock-controller@50650 <<
1577 compatible = "qcom,ms <<
1578 #clock-cells = <1>; <<
1579 #reset-cells = <1>; <<
1580 #power-domain-cells = <<
1581 reg = <0x05065000 0x9 <<
1582 <<
1583 clocks = <&rpmcc RPM_ <<
1584 <&gcc GCC_GP <<
1585 clock-names = "xo", <<
1586 "gpll0" <<
1587 }; <<
1588 <<
1589 lpass_q6_smmu: iommu@5100000 <<
1590 compatible = "qcom,ms <<
1591 reg = <0x05100000 0x4 <<
1592 clocks = <&gcc HLOS1_ <<
1593 clock-names = "bus"; <<
1594 <<
1595 #global-interrupts = <<
1596 #iommu-cells = <1>; <<
1597 interrupts = <<
1598 <GIC_SPI 226 <<
1599 <GIC_SPI 393 <<
1600 <GIC_SPI 394 <<
1601 <GIC_SPI 395 <<
1602 <GIC_SPI 396 <<
1603 <GIC_SPI 397 <<
1604 <GIC_SPI 398 <<
1605 <GIC_SPI 399 <<
1606 <GIC_SPI 400 <<
1607 <GIC_SPI 401 <<
1608 <GIC_SPI 402 <<
1609 <GIC_SPI 403 <<
1610 <GIC_SPI 137 <<
1611 <<
1612 power-domains = <&gcc <<
1613 status = "disabled"; <<
1614 }; <<
1615 <<
1616 remoteproc_slpi: remoteproc@5 <<
1617 compatible = "qcom,ms <<
1618 reg = <0x05800000 0x4 <<
1619 <<
1620 interrupts-extended = <<
1621 <<
1622 <<
1623 <<
1624 <<
1625 interrupt-names = "wd <<
1626 "ha <<
1627 <<
1628 px-supply = <&vreg_lv <<
1629 <<
1630 clocks = <&rpmcc RPM_ <<
1631 clock-names = "xo"; <<
1632 <<
1633 memory-region = <&slp <<
1634 <<
1635 qcom,smem-states = <& <<
1636 qcom,smem-state-names <<
1637 <<
1638 power-domains = <&rpm <<
1639 power-domain-names = <<
1640 <<
1641 status = "disabled"; <<
1642 <<
1643 glink-edge { <<
1644 interrupts = <<
1645 label = "dsps <<
1646 qcom,remote-p <<
1647 mboxes = <&ap <<
1648 }; <<
1649 }; 1001 };
1650 1002
1651 stm: stm@6002000 { 1003 stm: stm@6002000 {
1652 compatible = "arm,cor 1004 compatible = "arm,coresight-stm", "arm,primecell";
1653 reg = <0x06002000 0x1 1005 reg = <0x06002000 0x1000>,
1654 <0x16280000 0x1 1006 <0x16280000 0x180000>;
1655 reg-names = "stm-base !! 1007 reg-names = "stm-base", "stm-data-base";
1656 status = "disabled"; 1008 status = "disabled";
1657 1009
1658 clocks = <&rpmcc RPM_ 1010 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1659 clock-names = "apb_pc 1011 clock-names = "apb_pclk", "atclk";
1660 1012
1661 out-ports { 1013 out-ports {
1662 port { 1014 port {
1663 stm_o 1015 stm_out: endpoint {
1664 1016 remote-endpoint = <&funnel0_in7>;
1665 }; 1017 };
1666 }; 1018 };
1667 }; 1019 };
1668 }; 1020 };
1669 1021
1670 funnel1: funnel@6041000 { 1022 funnel1: funnel@6041000 {
1671 compatible = "arm,cor 1023 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1672 reg = <0x06041000 0x1 1024 reg = <0x06041000 0x1000>;
1673 status = "disabled"; 1025 status = "disabled";
1674 1026
1675 clocks = <&rpmcc RPM_ 1027 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1676 clock-names = "apb_pc 1028 clock-names = "apb_pclk", "atclk";
1677 1029
1678 out-ports { 1030 out-ports {
1679 port { 1031 port {
1680 funne 1032 funnel0_out: endpoint {
1681 1033 remote-endpoint =
1682 1034 <&merge_funnel_in0>;
1683 }; 1035 };
1684 }; 1036 };
1685 }; 1037 };
1686 1038
1687 in-ports { 1039 in-ports {
1688 #address-cell 1040 #address-cells = <1>;
1689 #size-cells = 1041 #size-cells = <0>;
1690 1042
1691 port@7 { 1043 port@7 {
1692 reg = 1044 reg = <7>;
1693 funne 1045 funnel0_in7: endpoint {
1694 1046 remote-endpoint = <&stm_out>;
1695 }; 1047 };
1696 }; 1048 };
1697 }; 1049 };
1698 }; 1050 };
1699 1051
1700 funnel2: funnel@6042000 { 1052 funnel2: funnel@6042000 {
1701 compatible = "arm,cor 1053 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1702 reg = <0x06042000 0x1 1054 reg = <0x06042000 0x1000>;
1703 status = "disabled"; 1055 status = "disabled";
1704 1056
1705 clocks = <&rpmcc RPM_ 1057 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1706 clock-names = "apb_pc 1058 clock-names = "apb_pclk", "atclk";
1707 1059
1708 out-ports { 1060 out-ports {
1709 port { 1061 port {
1710 funne 1062 funnel1_out: endpoint {
1711 1063 remote-endpoint =
1712 1064 <&merge_funnel_in1>;
1713 }; 1065 };
1714 }; 1066 };
1715 }; 1067 };
1716 1068
1717 in-ports { 1069 in-ports {
1718 #address-cell 1070 #address-cells = <1>;
1719 #size-cells = 1071 #size-cells = <0>;
1720 1072
1721 port@6 { 1073 port@6 {
1722 reg = 1074 reg = <6>;
1723 funne 1075 funnel1_in6: endpoint {
1724 1076 remote-endpoint =
1725 1077 <&apss_merge_funnel_out>;
1726 }; 1078 };
1727 }; 1079 };
1728 }; 1080 };
1729 }; 1081 };
1730 1082
1731 funnel3: funnel@6045000 { 1083 funnel3: funnel@6045000 {
1732 compatible = "arm,cor 1084 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1733 reg = <0x06045000 0x1 1085 reg = <0x06045000 0x1000>;
1734 status = "disabled"; 1086 status = "disabled";
1735 1087
1736 clocks = <&rpmcc RPM_ 1088 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1737 clock-names = "apb_pc 1089 clock-names = "apb_pclk", "atclk";
1738 1090
1739 out-ports { 1091 out-ports {
1740 port { 1092 port {
1741 merge 1093 merge_funnel_out: endpoint {
1742 1094 remote-endpoint =
1743 1095 <&etf_in>;
1744 }; 1096 };
1745 }; 1097 };
1746 }; 1098 };
1747 1099
1748 in-ports { 1100 in-ports {
1749 #address-cell 1101 #address-cells = <1>;
1750 #size-cells = 1102 #size-cells = <0>;
1751 1103
1752 port@0 { 1104 port@0 {
1753 reg = 1105 reg = <0>;
1754 merge 1106 merge_funnel_in0: endpoint {
1755 1107 remote-endpoint =
1756 1108 <&funnel0_out>;
1757 }; 1109 };
1758 }; 1110 };
1759 1111
1760 port@1 { 1112 port@1 {
1761 reg = 1113 reg = <1>;
1762 merge 1114 merge_funnel_in1: endpoint {
1763 1115 remote-endpoint =
1764 1116 <&funnel1_out>;
1765 }; 1117 };
1766 }; 1118 };
1767 }; 1119 };
1768 }; 1120 };
1769 1121
1770 replicator1: replicator@60460 1122 replicator1: replicator@6046000 {
1771 compatible = "arm,cor 1123 compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
1772 reg = <0x06046000 0x1 1124 reg = <0x06046000 0x1000>;
1773 status = "disabled"; 1125 status = "disabled";
1774 1126
1775 clocks = <&rpmcc RPM_ 1127 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1776 clock-names = "apb_pc 1128 clock-names = "apb_pclk", "atclk";
1777 1129
1778 out-ports { 1130 out-ports {
1779 port { 1131 port {
1780 repli 1132 replicator_out: endpoint {
1781 1133 remote-endpoint = <&etr_in>;
1782 }; 1134 };
1783 }; 1135 };
1784 }; 1136 };
1785 1137
1786 in-ports { 1138 in-ports {
1787 port { 1139 port {
1788 repli 1140 replicator_in: endpoint {
1789 1141 remote-endpoint = <&etf_out>;
1790 }; 1142 };
1791 }; 1143 };
1792 }; 1144 };
1793 }; 1145 };
1794 1146
1795 etf: etf@6047000 { 1147 etf: etf@6047000 {
1796 compatible = "arm,cor 1148 compatible = "arm,coresight-tmc", "arm,primecell";
1797 reg = <0x06047000 0x1 1149 reg = <0x06047000 0x1000>;
1798 status = "disabled"; 1150 status = "disabled";
1799 1151
1800 clocks = <&rpmcc RPM_ 1152 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1801 clock-names = "apb_pc 1153 clock-names = "apb_pclk", "atclk";
1802 1154
1803 out-ports { 1155 out-ports {
1804 port { 1156 port {
1805 etf_o 1157 etf_out: endpoint {
1806 1158 remote-endpoint =
1807 1159 <&replicator_in>;
1808 }; 1160 };
1809 }; 1161 };
1810 }; 1162 };
1811 1163
1812 in-ports { 1164 in-ports {
1813 port { 1165 port {
1814 etf_i 1166 etf_in: endpoint {
1815 1167 remote-endpoint =
1816 1168 <&merge_funnel_out>;
1817 }; 1169 };
1818 }; 1170 };
1819 }; 1171 };
1820 }; 1172 };
1821 1173
1822 etr: etr@6048000 { 1174 etr: etr@6048000 {
1823 compatible = "arm,cor 1175 compatible = "arm,coresight-tmc", "arm,primecell";
1824 reg = <0x06048000 0x1 1176 reg = <0x06048000 0x1000>;
1825 status = "disabled"; 1177 status = "disabled";
1826 1178
1827 clocks = <&rpmcc RPM_ 1179 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1828 clock-names = "apb_pc 1180 clock-names = "apb_pclk", "atclk";
1829 arm,scatter-gather; 1181 arm,scatter-gather;
1830 1182
1831 in-ports { 1183 in-ports {
1832 port { 1184 port {
1833 etr_i 1185 etr_in: endpoint {
1834 1186 remote-endpoint =
1835 1187 <&replicator_out>;
1836 }; 1188 };
1837 }; 1189 };
1838 }; 1190 };
1839 }; 1191 };
1840 1192
1841 etm1: etm@7840000 { 1193 etm1: etm@7840000 {
1842 compatible = "arm,cor 1194 compatible = "arm,coresight-etm4x", "arm,primecell";
1843 reg = <0x07840000 0x1 1195 reg = <0x07840000 0x1000>;
1844 status = "disabled"; 1196 status = "disabled";
1845 1197
1846 clocks = <&rpmcc RPM_ 1198 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1847 clock-names = "apb_pc 1199 clock-names = "apb_pclk", "atclk";
1848 1200
1849 cpu = <&CPU0>; 1201 cpu = <&CPU0>;
1850 1202
1851 out-ports { 1203 out-ports {
1852 port { 1204 port {
1853 etm0_ 1205 etm0_out: endpoint {
1854 1206 remote-endpoint =
1855 1207 <&apss_funnel_in0>;
1856 }; 1208 };
1857 }; 1209 };
1858 }; 1210 };
1859 }; 1211 };
1860 1212
1861 etm2: etm@7940000 { 1213 etm2: etm@7940000 {
1862 compatible = "arm,cor 1214 compatible = "arm,coresight-etm4x", "arm,primecell";
1863 reg = <0x07940000 0x1 1215 reg = <0x07940000 0x1000>;
1864 status = "disabled"; 1216 status = "disabled";
1865 1217
1866 clocks = <&rpmcc RPM_ 1218 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1867 clock-names = "apb_pc 1219 clock-names = "apb_pclk", "atclk";
1868 1220
1869 cpu = <&CPU1>; 1221 cpu = <&CPU1>;
1870 1222
1871 out-ports { 1223 out-ports {
1872 port { 1224 port {
1873 etm1_ 1225 etm1_out: endpoint {
1874 1226 remote-endpoint =
1875 1227 <&apss_funnel_in1>;
1876 }; 1228 };
1877 }; 1229 };
1878 }; 1230 };
1879 }; 1231 };
1880 1232
1881 etm3: etm@7a40000 { 1233 etm3: etm@7a40000 {
1882 compatible = "arm,cor 1234 compatible = "arm,coresight-etm4x", "arm,primecell";
1883 reg = <0x07a40000 0x1 1235 reg = <0x07a40000 0x1000>;
1884 status = "disabled"; 1236 status = "disabled";
1885 1237
1886 clocks = <&rpmcc RPM_ 1238 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1887 clock-names = "apb_pc 1239 clock-names = "apb_pclk", "atclk";
1888 1240
1889 cpu = <&CPU2>; 1241 cpu = <&CPU2>;
1890 1242
1891 out-ports { 1243 out-ports {
1892 port { 1244 port {
1893 etm2_ 1245 etm2_out: endpoint {
1894 1246 remote-endpoint =
1895 1247 <&apss_funnel_in2>;
1896 }; 1248 };
1897 }; 1249 };
1898 }; 1250 };
1899 }; 1251 };
1900 1252
1901 etm4: etm@7b40000 { 1253 etm4: etm@7b40000 {
1902 compatible = "arm,cor 1254 compatible = "arm,coresight-etm4x", "arm,primecell";
1903 reg = <0x07b40000 0x1 1255 reg = <0x07b40000 0x1000>;
1904 status = "disabled"; 1256 status = "disabled";
1905 1257
1906 clocks = <&rpmcc RPM_ 1258 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1907 clock-names = "apb_pc 1259 clock-names = "apb_pclk", "atclk";
1908 1260
1909 cpu = <&CPU3>; 1261 cpu = <&CPU3>;
1910 1262
1911 out-ports { 1263 out-ports {
1912 port { 1264 port {
1913 etm3_ 1265 etm3_out: endpoint {
1914 1266 remote-endpoint =
1915 1267 <&apss_funnel_in3>;
1916 }; 1268 };
1917 }; 1269 };
1918 }; 1270 };
1919 }; 1271 };
1920 1272
1921 funnel4: funnel@7b60000 { /* 1273 funnel4: funnel@7b60000 { /* APSS Funnel */
1922 compatible = "arm,cor 1274 compatible = "arm,coresight-etm4x", "arm,primecell";
1923 reg = <0x07b60000 0x1 1275 reg = <0x07b60000 0x1000>;
1924 status = "disabled"; 1276 status = "disabled";
1925 1277
1926 clocks = <&rpmcc RPM_ 1278 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1927 clock-names = "apb_pc 1279 clock-names = "apb_pclk", "atclk";
1928 1280
1929 out-ports { 1281 out-ports {
1930 port { 1282 port {
1931 apss_ 1283 apss_funnel_out: endpoint {
1932 1284 remote-endpoint =
1933 1285 <&apss_merge_funnel_in>;
1934 }; 1286 };
1935 }; 1287 };
1936 }; 1288 };
1937 1289
1938 in-ports { 1290 in-ports {
1939 #address-cell 1291 #address-cells = <1>;
1940 #size-cells = 1292 #size-cells = <0>;
1941 1293
1942 port@0 { 1294 port@0 {
1943 reg = 1295 reg = <0>;
1944 apss_ 1296 apss_funnel_in0: endpoint {
1945 1297 remote-endpoint =
1946 1298 <&etm0_out>;
1947 }; 1299 };
1948 }; 1300 };
1949 1301
1950 port@1 { 1302 port@1 {
1951 reg = 1303 reg = <1>;
1952 apss_ 1304 apss_funnel_in1: endpoint {
1953 1305 remote-endpoint =
1954 1306 <&etm1_out>;
1955 }; 1307 };
1956 }; 1308 };
1957 1309
1958 port@2 { 1310 port@2 {
1959 reg = 1311 reg = <2>;
1960 apss_ 1312 apss_funnel_in2: endpoint {
1961 1313 remote-endpoint =
1962 1314 <&etm2_out>;
1963 }; 1315 };
1964 }; 1316 };
1965 1317
1966 port@3 { 1318 port@3 {
1967 reg = 1319 reg = <3>;
1968 apss_ 1320 apss_funnel_in3: endpoint {
1969 1321 remote-endpoint =
1970 1322 <&etm3_out>;
1971 }; 1323 };
1972 }; 1324 };
1973 1325
1974 port@4 { 1326 port@4 {
1975 reg = 1327 reg = <4>;
1976 apss_ 1328 apss_funnel_in4: endpoint {
1977 1329 remote-endpoint =
1978 1330 <&etm4_out>;
1979 }; 1331 };
1980 }; 1332 };
1981 1333
1982 port@5 { 1334 port@5 {
1983 reg = 1335 reg = <5>;
1984 apss_ 1336 apss_funnel_in5: endpoint {
1985 1337 remote-endpoint =
1986 1338 <&etm5_out>;
1987 }; 1339 };
1988 }; 1340 };
1989 1341
1990 port@6 { 1342 port@6 {
1991 reg = 1343 reg = <6>;
1992 apss_ 1344 apss_funnel_in6: endpoint {
1993 1345 remote-endpoint =
1994 1346 <&etm6_out>;
1995 }; 1347 };
1996 }; 1348 };
1997 1349
1998 port@7 { 1350 port@7 {
1999 reg = 1351 reg = <7>;
2000 apss_ 1352 apss_funnel_in7: endpoint {
2001 1353 remote-endpoint =
2002 1354 <&etm7_out>;
2003 }; 1355 };
2004 }; 1356 };
2005 }; 1357 };
2006 }; 1358 };
2007 1359
2008 funnel5: funnel@7b70000 { 1360 funnel5: funnel@7b70000 {
2009 compatible = "arm,cor 1361 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2010 reg = <0x07b70000 0x1 1362 reg = <0x07b70000 0x1000>;
2011 status = "disabled"; 1363 status = "disabled";
2012 1364
2013 clocks = <&rpmcc RPM_ 1365 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2014 clock-names = "apb_pc 1366 clock-names = "apb_pclk", "atclk";
2015 1367
2016 out-ports { 1368 out-ports {
2017 port { 1369 port {
2018 apss_ 1370 apss_merge_funnel_out: endpoint {
2019 1371 remote-endpoint =
2020 1372 <&funnel1_in6>;
2021 }; 1373 };
2022 }; 1374 };
2023 }; 1375 };
2024 1376
2025 in-ports { 1377 in-ports {
2026 port { 1378 port {
2027 apss_ 1379 apss_merge_funnel_in: endpoint {
2028 1380 remote-endpoint =
2029 1381 <&apss_funnel_out>;
2030 }; 1382 };
2031 }; 1383 };
2032 }; 1384 };
2033 }; 1385 };
2034 1386
2035 etm5: etm@7c40000 { 1387 etm5: etm@7c40000 {
2036 compatible = "arm,cor 1388 compatible = "arm,coresight-etm4x", "arm,primecell";
2037 reg = <0x07c40000 0x1 1389 reg = <0x07c40000 0x1000>;
2038 status = "disabled"; 1390 status = "disabled";
2039 1391
2040 clocks = <&rpmcc RPM_ 1392 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2041 clock-names = "apb_pc 1393 clock-names = "apb_pclk", "atclk";
2042 1394
2043 cpu = <&CPU4>; 1395 cpu = <&CPU4>;
2044 1396
2045 out-ports { !! 1397 port{
2046 port { !! 1398 etm4_out: endpoint {
2047 etm4_ !! 1399 remote-endpoint = <&apss_funnel_in4>;
2048 <<
2049 }; <<
2050 }; 1400 };
2051 }; 1401 };
2052 }; 1402 };
2053 1403
2054 etm6: etm@7d40000 { 1404 etm6: etm@7d40000 {
2055 compatible = "arm,cor 1405 compatible = "arm,coresight-etm4x", "arm,primecell";
2056 reg = <0x07d40000 0x1 1406 reg = <0x07d40000 0x1000>;
2057 status = "disabled"; 1407 status = "disabled";
2058 1408
2059 clocks = <&rpmcc RPM_ 1409 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2060 clock-names = "apb_pc 1410 clock-names = "apb_pclk", "atclk";
2061 1411
2062 cpu = <&CPU5>; 1412 cpu = <&CPU5>;
2063 1413
2064 out-ports { !! 1414 port{
2065 port { !! 1415 etm5_out: endpoint {
2066 etm5_ !! 1416 remote-endpoint = <&apss_funnel_in5>;
2067 <<
2068 }; <<
2069 }; 1417 };
2070 }; 1418 };
2071 }; 1419 };
2072 1420
2073 etm7: etm@7e40000 { 1421 etm7: etm@7e40000 {
2074 compatible = "arm,cor 1422 compatible = "arm,coresight-etm4x", "arm,primecell";
2075 reg = <0x07e40000 0x1 1423 reg = <0x07e40000 0x1000>;
2076 status = "disabled"; 1424 status = "disabled";
2077 1425
2078 clocks = <&rpmcc RPM_ 1426 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2079 clock-names = "apb_pc 1427 clock-names = "apb_pclk", "atclk";
2080 1428
2081 cpu = <&CPU6>; 1429 cpu = <&CPU6>;
2082 1430
2083 out-ports { !! 1431 port{
2084 port { !! 1432 etm6_out: endpoint {
2085 etm6_ !! 1433 remote-endpoint = <&apss_funnel_in6>;
2086 <<
2087 }; <<
2088 }; 1434 };
2089 }; 1435 };
2090 }; 1436 };
2091 1437
2092 etm8: etm@7f40000 { 1438 etm8: etm@7f40000 {
2093 compatible = "arm,cor 1439 compatible = "arm,coresight-etm4x", "arm,primecell";
2094 reg = <0x07f40000 0x1 1440 reg = <0x07f40000 0x1000>;
2095 status = "disabled"; 1441 status = "disabled";
2096 1442
2097 clocks = <&rpmcc RPM_ 1443 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
2098 clock-names = "apb_pc 1444 clock-names = "apb_pclk", "atclk";
2099 1445
2100 cpu = <&CPU7>; 1446 cpu = <&CPU7>;
2101 1447
2102 out-ports { !! 1448 port{
2103 port { !! 1449 etm7_out: endpoint {
2104 etm7_ !! 1450 remote-endpoint = <&apss_funnel_in7>;
2105 <<
2106 }; <<
2107 }; 1451 };
2108 }; 1452 };
2109 }; 1453 };
2110 1454
2111 sram@290000 { <<
2112 compatible = "qcom,rp <<
2113 reg = <0x00290000 0x1 <<
2114 }; <<
2115 <<
2116 spmi_bus: spmi@800f000 { 1455 spmi_bus: spmi@800f000 {
2117 compatible = "qcom,sp 1456 compatible = "qcom,spmi-pmic-arb";
2118 reg = <0x0800f000 0x1 !! 1457 reg = <0x0800f000 0x1000>,
2119 <0x08400000 0x1 !! 1458 <0x08400000 0x1000000>,
2120 <0x09400000 0x1 !! 1459 <0x09400000 0x1000000>,
2121 <0x0a400000 0x2 !! 1460 <0x0a400000 0x220000>,
2122 <0x0800a000 0x3 !! 1461 <0x0800a000 0x3000>;
2123 reg-names = "core", " 1462 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
2124 interrupt-names = "pe 1463 interrupt-names = "periph_irq";
2125 interrupts = <GIC_SPI 1464 interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
2126 qcom,ee = <0>; 1465 qcom,ee = <0>;
2127 qcom,channel = <0>; 1466 qcom,channel = <0>;
2128 #address-cells = <2>; 1467 #address-cells = <2>;
2129 #size-cells = <0>; 1468 #size-cells = <0>;
2130 interrupt-controller; 1469 interrupt-controller;
2131 #interrupt-cells = <4 1470 #interrupt-cells = <4>;
>> 1471 cell-index = <0>;
2132 }; 1472 };
2133 1473
2134 usb3: usb@a8f8800 { 1474 usb3: usb@a8f8800 {
2135 compatible = "qcom,ms 1475 compatible = "qcom,msm8998-dwc3", "qcom,dwc3";
2136 reg = <0x0a8f8800 0x4 1476 reg = <0x0a8f8800 0x400>;
2137 status = "disabled"; 1477 status = "disabled";
2138 #address-cells = <1>; 1478 #address-cells = <1>;
2139 #size-cells = <1>; 1479 #size-cells = <1>;
2140 ranges; 1480 ranges;
2141 1481
2142 clocks = <&gcc GCC_CF 1482 clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
2143 <&gcc GCC_US 1483 <&gcc GCC_USB30_MASTER_CLK>,
2144 <&gcc GCC_AG 1484 <&gcc GCC_AGGRE1_USB3_AXI_CLK>,
2145 <&gcc GCC_US !! 1485 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
2146 <&gcc GCC_US !! 1486 <&gcc GCC_USB30_SLEEP_CLK>;
2147 clock-names = "cfg_no !! 1487 clock-names = "cfg_noc", "core", "iface", "mock_utmi",
2148 "core", !! 1488 "sleep";
2149 "iface" <<
2150 "sleep" <<
2151 "mock_u <<
2152 1489
2153 assigned-clocks = <&g 1490 assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
2154 <&g 1491 <&gcc GCC_USB30_MASTER_CLK>;
2155 assigned-clock-rates 1492 assigned-clock-rates = <19200000>, <120000000>;
2156 1493
2157 interrupts = <GIC_SPI !! 1494 interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
2158 <GIC_SPI <<
2159 <GIC_SPI 1495 <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
2160 interrupt-names = "pw !! 1496 interrupt-names = "hs_phy_irq", "ss_phy_irq";
2161 "qu <<
2162 "ss <<
2163 1497
2164 power-domains = <&gcc 1498 power-domains = <&gcc USB_30_GDSC>;
2165 1499
2166 resets = <&gcc GCC_US 1500 resets = <&gcc GCC_USB_30_BCR>;
2167 1501
2168 usb3_dwc3: usb@a80000 !! 1502 usb3_dwc3: dwc3@a800000 {
2169 compatible = 1503 compatible = "snps,dwc3";
2170 reg = <0x0a80 1504 reg = <0x0a800000 0xcd00>;
2171 interrupts = 1505 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
2172 snps,dis_u2_s 1506 snps,dis_u2_susphy_quirk;
2173 snps,dis_enbl 1507 snps,dis_enblslpm_quirk;
2174 snps,parkmode !! 1508 phys = <&qusb2phy>, <&usb1_ssphy>;
2175 phys = <&qusb <<
2176 phy-names = " 1509 phy-names = "usb2-phy", "usb3-phy";
2177 snps,has-lpm- 1510 snps,has-lpm-erratum;
2178 snps,hird-thr 1511 snps,hird-threshold = /bits/ 8 <0x10>;
2179 }; 1512 };
2180 }; 1513 };
2181 1514
2182 usb3phy: phy@c010000 { 1515 usb3phy: phy@c010000 {
2183 compatible = "qcom,ms 1516 compatible = "qcom,msm8998-qmp-usb3-phy";
2184 reg = <0x0c010000 0x1 !! 1517 reg = <0x0c010000 0x18c>;
>> 1518 status = "disabled";
>> 1519 #clock-cells = <1>;
>> 1520 #address-cells = <1>;
>> 1521 #size-cells = <1>;
>> 1522 ranges;
2185 1523
2186 clocks = <&gcc GCC_US 1524 clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
2187 <&gcc GCC_US <<
2188 <&gcc GCC_US 1525 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2189 <&gcc GCC_US !! 1526 <&gcc GCC_USB3_CLKREF_CLK>;
2190 clock-names = "aux", !! 1527 clock-names = "aux", "cfg_ahb", "ref";
2191 "ref", <<
2192 "cfg_ah <<
2193 "pipe"; <<
2194 clock-output-names = <<
2195 #clock-cells = <0>; <<
2196 #phy-cells = <0>; <<
2197 1528
2198 resets = <&gcc GCC_US 1529 resets = <&gcc GCC_USB3_PHY_BCR>,
2199 <&gcc GCC_US 1530 <&gcc GCC_USB3PHY_PHY_BCR>;
2200 reset-names = "phy", !! 1531 reset-names = "phy", "common";
2201 "phy_ph <<
2202 <<
2203 qcom,tcsr-reg = <&tcs <<
2204 1532
2205 status = "disabled"; !! 1533 usb1_ssphy: lane@c010200 {
>> 1534 reg = <0xc010200 0x128>,
>> 1535 <0xc010400 0x200>,
>> 1536 <0xc010c00 0x20c>,
>> 1537 <0xc010600 0x128>,
>> 1538 <0xc010800 0x200>;
>> 1539 #phy-cells = <0>;
>> 1540 clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
>> 1541 clock-names = "pipe0";
>> 1542 clock-output-names = "usb3_phy_pipe_clk_src";
>> 1543 };
2206 }; 1544 };
2207 1545
2208 qusb2phy: phy@c012000 { 1546 qusb2phy: phy@c012000 {
2209 compatible = "qcom,ms 1547 compatible = "qcom,msm8998-qusb2-phy";
2210 reg = <0x0c012000 0x2 1548 reg = <0x0c012000 0x2a8>;
2211 status = "disabled"; 1549 status = "disabled";
2212 #phy-cells = <0>; 1550 #phy-cells = <0>;
2213 1551
2214 clocks = <&gcc GCC_US 1552 clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
2215 <&gcc GCC_RX 1553 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
2216 clock-names = "cfg_ah 1554 clock-names = "cfg_ahb", "ref";
2217 1555
2218 resets = <&gcc GCC_QU 1556 resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2219 1557
2220 nvmem-cells = <&qusb2 1558 nvmem-cells = <&qusb2_hstx_trim>;
2221 }; 1559 };
2222 1560
2223 sdhc2: mmc@c0a4900 { !! 1561 sdhc2: sdhci@c0a4900 {
2224 compatible = "qcom,ms !! 1562 compatible = "qcom,sdhci-msm-v4";
2225 reg = <0x0c0a4900 0x3 1563 reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>;
2226 reg-names = "hc", "co !! 1564 reg-names = "hc_mem", "core_mem";
2227 1565
2228 interrupts = <GIC_SPI 1566 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
2229 <GIC_SPI 1567 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
2230 interrupt-names = "hc 1568 interrupt-names = "hc_irq", "pwr_irq";
2231 1569
2232 clock-names = "iface" 1570 clock-names = "iface", "core", "xo";
2233 clocks = <&gcc GCC_SD 1571 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2234 <&gcc GCC_SD 1572 <&gcc GCC_SDCC2_APPS_CLK>,
2235 <&rpmcc RPM_ !! 1573 <&xo>;
2236 bus-width = <4>; 1574 bus-width = <4>;
2237 status = "disabled"; 1575 status = "disabled";
2238 }; 1576 };
2239 1577
2240 blsp1_dma: dma-controller@c14 !! 1578 blsp1_dma: dma@c144000 {
2241 compatible = "qcom,ba 1579 compatible = "qcom,bam-v1.7.0";
2242 reg = <0x0c144000 0x2 1580 reg = <0x0c144000 0x25000>;
2243 interrupts = <GIC_SPI 1581 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
2244 clocks = <&gcc GCC_BL 1582 clocks = <&gcc GCC_BLSP1_AHB_CLK>;
2245 clock-names = "bam_cl 1583 clock-names = "bam_clk";
2246 #dma-cells = <1>; 1584 #dma-cells = <1>;
2247 qcom,ee = <0>; 1585 qcom,ee = <0>;
2248 qcom,controlled-remot 1586 qcom,controlled-remotely;
2249 num-channels = <18>; 1587 num-channels = <18>;
2250 qcom,num-ees = <4>; 1588 qcom,num-ees = <4>;
2251 }; 1589 };
2252 1590
2253 blsp1_uart3: serial@c171000 { 1591 blsp1_uart3: serial@c171000 {
2254 compatible = "qcom,ms 1592 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2255 reg = <0x0c171000 0x1 1593 reg = <0x0c171000 0x1000>;
2256 interrupts = <GIC_SPI 1594 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
2257 clocks = <&gcc GCC_BL 1595 clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
2258 <&gcc GCC_BL 1596 <&gcc GCC_BLSP1_AHB_CLK>;
2259 clock-names = "core", 1597 clock-names = "core", "iface";
2260 dmas = <&blsp1_dma 4> 1598 dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
2261 dma-names = "tx", "rx 1599 dma-names = "tx", "rx";
2262 pinctrl-names = "defa 1600 pinctrl-names = "default";
2263 pinctrl-0 = <&blsp1_u 1601 pinctrl-0 = <&blsp1_uart3_on>;
2264 status = "disabled"; 1602 status = "disabled";
2265 }; 1603 };
2266 1604
2267 blsp1_i2c1: i2c@c175000 { 1605 blsp1_i2c1: i2c@c175000 {
2268 compatible = "qcom,i2 1606 compatible = "qcom,i2c-qup-v2.2.1";
2269 reg = <0x0c175000 0x6 1607 reg = <0x0c175000 0x600>;
2270 interrupts = <GIC_SPI 1608 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
2271 1609
2272 clocks = <&gcc GCC_BL 1610 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
2273 <&gcc GCC_BL 1611 <&gcc GCC_BLSP1_AHB_CLK>;
2274 clock-names = "core", 1612 clock-names = "core", "iface";
2275 dmas = <&blsp1_dma 6> <<
2276 dma-names = "tx", "rx <<
2277 pinctrl-names = "defa <<
2278 pinctrl-0 = <&blsp1_i <<
2279 pinctrl-1 = <&blsp1_i <<
2280 clock-frequency = <40 1613 clock-frequency = <400000>;
2281 1614
2282 status = "disabled"; 1615 status = "disabled";
2283 #address-cells = <1>; 1616 #address-cells = <1>;
2284 #size-cells = <0>; 1617 #size-cells = <0>;
2285 }; 1618 };
2286 1619
2287 blsp1_i2c2: i2c@c176000 { 1620 blsp1_i2c2: i2c@c176000 {
2288 compatible = "qcom,i2 1621 compatible = "qcom,i2c-qup-v2.2.1";
2289 reg = <0x0c176000 0x6 1622 reg = <0x0c176000 0x600>;
2290 interrupts = <GIC_SPI 1623 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
2291 1624
2292 clocks = <&gcc GCC_BL 1625 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
2293 <&gcc GCC_BL 1626 <&gcc GCC_BLSP1_AHB_CLK>;
2294 clock-names = "core", 1627 clock-names = "core", "iface";
2295 dmas = <&blsp1_dma 8> <<
2296 dma-names = "tx", "rx <<
2297 pinctrl-names = "defa <<
2298 pinctrl-0 = <&blsp1_i <<
2299 pinctrl-1 = <&blsp1_i <<
2300 clock-frequency = <40 1628 clock-frequency = <400000>;
2301 1629
2302 status = "disabled"; 1630 status = "disabled";
2303 #address-cells = <1>; 1631 #address-cells = <1>;
2304 #size-cells = <0>; 1632 #size-cells = <0>;
2305 }; 1633 };
2306 1634
2307 blsp1_i2c3: i2c@c177000 { 1635 blsp1_i2c3: i2c@c177000 {
2308 compatible = "qcom,i2 1636 compatible = "qcom,i2c-qup-v2.2.1";
2309 reg = <0x0c177000 0x6 1637 reg = <0x0c177000 0x600>;
2310 interrupts = <GIC_SPI 1638 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
2311 1639
2312 clocks = <&gcc GCC_BL 1640 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
2313 <&gcc GCC_BL 1641 <&gcc GCC_BLSP1_AHB_CLK>;
2314 clock-names = "core", 1642 clock-names = "core", "iface";
2315 dmas = <&blsp1_dma 10 <<
2316 dma-names = "tx", "rx <<
2317 pinctrl-names = "defa <<
2318 pinctrl-0 = <&blsp1_i <<
2319 pinctrl-1 = <&blsp1_i <<
2320 clock-frequency = <40 1643 clock-frequency = <400000>;
2321 1644
2322 status = "disabled"; 1645 status = "disabled";
2323 #address-cells = <1>; 1646 #address-cells = <1>;
2324 #size-cells = <0>; 1647 #size-cells = <0>;
2325 }; 1648 };
2326 1649
2327 blsp1_i2c4: i2c@c178000 { 1650 blsp1_i2c4: i2c@c178000 {
2328 compatible = "qcom,i2 1651 compatible = "qcom,i2c-qup-v2.2.1";
2329 reg = <0x0c178000 0x6 1652 reg = <0x0c178000 0x600>;
2330 interrupts = <GIC_SPI 1653 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
2331 1654
2332 clocks = <&gcc GCC_BL 1655 clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
2333 <&gcc GCC_BL 1656 <&gcc GCC_BLSP1_AHB_CLK>;
2334 clock-names = "core", 1657 clock-names = "core", "iface";
2335 dmas = <&blsp1_dma 12 <<
2336 dma-names = "tx", "rx <<
2337 pinctrl-names = "defa <<
2338 pinctrl-0 = <&blsp1_i <<
2339 pinctrl-1 = <&blsp1_i <<
2340 clock-frequency = <40 1658 clock-frequency = <400000>;
2341 1659
2342 status = "disabled"; 1660 status = "disabled";
2343 #address-cells = <1>; 1661 #address-cells = <1>;
2344 #size-cells = <0>; 1662 #size-cells = <0>;
2345 }; 1663 };
2346 1664
2347 blsp1_i2c5: i2c@c179000 { 1665 blsp1_i2c5: i2c@c179000 {
2348 compatible = "qcom,i2 1666 compatible = "qcom,i2c-qup-v2.2.1";
2349 reg = <0x0c179000 0x6 1667 reg = <0x0c179000 0x600>;
2350 interrupts = <GIC_SPI 1668 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
2351 1669
2352 clocks = <&gcc GCC_BL 1670 clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
2353 <&gcc GCC_BL 1671 <&gcc GCC_BLSP1_AHB_CLK>;
2354 clock-names = "core", 1672 clock-names = "core", "iface";
2355 dmas = <&blsp1_dma 14 <<
2356 dma-names = "tx", "rx <<
2357 pinctrl-names = "defa <<
2358 pinctrl-0 = <&blsp1_i <<
2359 pinctrl-1 = <&blsp1_i <<
2360 clock-frequency = <40 1673 clock-frequency = <400000>;
2361 1674
2362 status = "disabled"; 1675 status = "disabled";
2363 #address-cells = <1>; 1676 #address-cells = <1>;
2364 #size-cells = <0>; 1677 #size-cells = <0>;
2365 }; 1678 };
2366 1679
2367 blsp1_i2c6: i2c@c17a000 { 1680 blsp1_i2c6: i2c@c17a000 {
2368 compatible = "qcom,i2 1681 compatible = "qcom,i2c-qup-v2.2.1";
2369 reg = <0x0c17a000 0x6 1682 reg = <0x0c17a000 0x600>;
2370 interrupts = <GIC_SPI 1683 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
2371 1684
2372 clocks = <&gcc GCC_BL 1685 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
2373 <&gcc GCC_BL 1686 <&gcc GCC_BLSP1_AHB_CLK>;
2374 clock-names = "core", 1687 clock-names = "core", "iface";
2375 dmas = <&blsp1_dma 16 <<
2376 dma-names = "tx", "rx <<
2377 pinctrl-names = "defa <<
2378 pinctrl-0 = <&blsp1_i <<
2379 pinctrl-1 = <&blsp1_i <<
2380 clock-frequency = <40 1688 clock-frequency = <400000>;
2381 1689
2382 status = "disabled"; 1690 status = "disabled";
2383 #address-cells = <1>; 1691 #address-cells = <1>;
2384 #size-cells = <0>; 1692 #size-cells = <0>;
2385 }; 1693 };
2386 1694
2387 blsp1_spi1: spi@c175000 { <<
2388 compatible = "qcom,sp <<
2389 reg = <0x0c175000 0x6 <<
2390 interrupts = <GIC_SPI <<
2391 <<
2392 clocks = <&gcc GCC_BL <<
2393 <&gcc GCC_BL <<
2394 clock-names = "core", <<
2395 dmas = <&blsp1_dma 6> <<
2396 dma-names = "tx", "rx <<
2397 pinctrl-names = "defa <<
2398 pinctrl-0 = <&blsp1_s <<
2399 <<
2400 status = "disabled"; <<
2401 #address-cells = <1>; <<
2402 #size-cells = <0>; <<
2403 }; <<
2404 <<
2405 blsp1_spi2: spi@c176000 { <<
2406 compatible = "qcom,sp <<
2407 reg = <0x0c176000 0x6 <<
2408 interrupts = <GIC_SPI <<
2409 <<
2410 clocks = <&gcc GCC_BL <<
2411 <&gcc GCC_BL <<
2412 clock-names = "core", <<
2413 dmas = <&blsp1_dma 8> <<
2414 dma-names = "tx", "rx <<
2415 pinctrl-names = "defa <<
2416 pinctrl-0 = <&blsp1_s <<
2417 <<
2418 status = "disabled"; <<
2419 #address-cells = <1>; <<
2420 #size-cells = <0>; <<
2421 }; <<
2422 <<
2423 blsp1_spi3: spi@c177000 { <<
2424 compatible = "qcom,sp <<
2425 reg = <0x0c177000 0x6 <<
2426 interrupts = <GIC_SPI <<
2427 <<
2428 clocks = <&gcc GCC_BL <<
2429 <&gcc GCC_BL <<
2430 clock-names = "core", <<
2431 dmas = <&blsp1_dma 10 <<
2432 dma-names = "tx", "rx <<
2433 pinctrl-names = "defa <<
2434 pinctrl-0 = <&blsp1_s <<
2435 <<
2436 status = "disabled"; <<
2437 #address-cells = <1>; <<
2438 #size-cells = <0>; <<
2439 }; <<
2440 <<
2441 blsp1_spi4: spi@c178000 { <<
2442 compatible = "qcom,sp <<
2443 reg = <0x0c178000 0x6 <<
2444 interrupts = <GIC_SPI <<
2445 <<
2446 clocks = <&gcc GCC_BL <<
2447 <&gcc GCC_BL <<
2448 clock-names = "core", <<
2449 dmas = <&blsp1_dma 12 <<
2450 dma-names = "tx", "rx <<
2451 pinctrl-names = "defa <<
2452 pinctrl-0 = <&blsp1_s <<
2453 <<
2454 status = "disabled"; <<
2455 #address-cells = <1>; <<
2456 #size-cells = <0>; <<
2457 }; <<
2458 <<
2459 blsp1_spi5: spi@c179000 { <<
2460 compatible = "qcom,sp <<
2461 reg = <0x0c179000 0x6 <<
2462 interrupts = <GIC_SPI <<
2463 <<
2464 clocks = <&gcc GCC_BL <<
2465 <&gcc GCC_BL <<
2466 clock-names = "core", <<
2467 dmas = <&blsp1_dma 14 <<
2468 dma-names = "tx", "rx <<
2469 pinctrl-names = "defa <<
2470 pinctrl-0 = <&blsp1_s <<
2471 <<
2472 status = "disabled"; <<
2473 #address-cells = <1>; <<
2474 #size-cells = <0>; <<
2475 }; <<
2476 <<
2477 blsp1_spi6: spi@c17a000 { <<
2478 compatible = "qcom,sp <<
2479 reg = <0x0c17a000 0x6 <<
2480 interrupts = <GIC_SPI <<
2481 <<
2482 clocks = <&gcc GCC_BL <<
2483 <&gcc GCC_BL <<
2484 clock-names = "core", <<
2485 dmas = <&blsp1_dma 16 <<
2486 dma-names = "tx", "rx <<
2487 pinctrl-names = "defa <<
2488 pinctrl-0 = <&blsp1_s <<
2489 <<
2490 status = "disabled"; <<
2491 #address-cells = <1>; <<
2492 #size-cells = <0>; <<
2493 }; <<
2494 <<
2495 blsp2_dma: dma-controller@c18 <<
2496 compatible = "qcom,ba <<
2497 reg = <0x0c184000 0x2 <<
2498 interrupts = <GIC_SPI <<
2499 clocks = <&gcc GCC_BL <<
2500 clock-names = "bam_cl <<
2501 #dma-cells = <1>; <<
2502 qcom,ee = <0>; <<
2503 qcom,controlled-remot <<
2504 num-channels = <18>; <<
2505 qcom,num-ees = <4>; <<
2506 }; <<
2507 <<
2508 blsp2_uart1: serial@c1b0000 { 1695 blsp2_uart1: serial@c1b0000 {
2509 compatible = "qcom,ms 1696 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
2510 reg = <0x0c1b0000 0x1 1697 reg = <0x0c1b0000 0x1000>;
2511 interrupts = <GIC_SPI 1698 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
2512 clocks = <&gcc GCC_BL 1699 clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
2513 <&gcc GCC_BL 1700 <&gcc GCC_BLSP2_AHB_CLK>;
2514 clock-names = "core", 1701 clock-names = "core", "iface";
2515 status = "disabled"; 1702 status = "disabled";
2516 }; 1703 };
2517 1704
2518 blsp2_i2c1: i2c@c1b5000 { !! 1705 blsp2_i2c0: i2c@c1b5000 {
2519 compatible = "qcom,i2 1706 compatible = "qcom,i2c-qup-v2.2.1";
2520 reg = <0x0c1b5000 0x6 1707 reg = <0x0c1b5000 0x600>;
2521 interrupts = <GIC_SPI 1708 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
2522 1709
2523 clocks = <&gcc GCC_BL 1710 clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
2524 <&gcc GCC_BL 1711 <&gcc GCC_BLSP2_AHB_CLK>;
2525 clock-names = "core", 1712 clock-names = "core", "iface";
2526 dmas = <&blsp2_dma 6> <<
2527 dma-names = "tx", "rx <<
2528 pinctrl-names = "defa <<
2529 pinctrl-0 = <&blsp2_i <<
2530 pinctrl-1 = <&blsp2_i <<
2531 clock-frequency = <40 1713 clock-frequency = <400000>;
2532 1714
2533 status = "disabled"; 1715 status = "disabled";
2534 #address-cells = <1>; 1716 #address-cells = <1>;
2535 #size-cells = <0>; 1717 #size-cells = <0>;
2536 }; 1718 };
2537 1719
2538 blsp2_i2c2: i2c@c1b6000 { !! 1720 blsp2_i2c1: i2c@c1b6000 {
2539 compatible = "qcom,i2 1721 compatible = "qcom,i2c-qup-v2.2.1";
2540 reg = <0x0c1b6000 0x6 1722 reg = <0x0c1b6000 0x600>;
2541 interrupts = <GIC_SPI 1723 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
2542 1724
2543 clocks = <&gcc GCC_BL 1725 clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
2544 <&gcc GCC_BL 1726 <&gcc GCC_BLSP2_AHB_CLK>;
2545 clock-names = "core", 1727 clock-names = "core", "iface";
2546 dmas = <&blsp2_dma 8> <<
2547 dma-names = "tx", "rx <<
2548 pinctrl-names = "defa <<
2549 pinctrl-0 = <&blsp2_i <<
2550 pinctrl-1 = <&blsp2_i <<
2551 clock-frequency = <40 1728 clock-frequency = <400000>;
2552 1729
2553 status = "disabled"; 1730 status = "disabled";
2554 #address-cells = <1>; 1731 #address-cells = <1>;
2555 #size-cells = <0>; 1732 #size-cells = <0>;
2556 }; 1733 };
2557 1734
2558 blsp2_i2c3: i2c@c1b7000 { !! 1735 blsp2_i2c2: i2c@c1b7000 {
2559 compatible = "qcom,i2 1736 compatible = "qcom,i2c-qup-v2.2.1";
2560 reg = <0x0c1b7000 0x6 1737 reg = <0x0c1b7000 0x600>;
2561 interrupts = <GIC_SPI 1738 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
2562 1739
2563 clocks = <&gcc GCC_BL 1740 clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
2564 <&gcc GCC_BL 1741 <&gcc GCC_BLSP2_AHB_CLK>;
2565 clock-names = "core", 1742 clock-names = "core", "iface";
2566 dmas = <&blsp2_dma 10 <<
2567 dma-names = "tx", "rx <<
2568 pinctrl-names = "defa <<
2569 pinctrl-0 = <&blsp2_i <<
2570 pinctrl-1 = <&blsp2_i <<
2571 clock-frequency = <40 1743 clock-frequency = <400000>;
2572 1744
2573 status = "disabled"; 1745 status = "disabled";
2574 #address-cells = <1>; 1746 #address-cells = <1>;
2575 #size-cells = <0>; 1747 #size-cells = <0>;
2576 }; 1748 };
2577 1749
2578 blsp2_i2c4: i2c@c1b8000 { !! 1750 blsp2_i2c3: i2c@c1b8000 {
2579 compatible = "qcom,i2 1751 compatible = "qcom,i2c-qup-v2.2.1";
2580 reg = <0x0c1b8000 0x6 1752 reg = <0x0c1b8000 0x600>;
2581 interrupts = <GIC_SPI 1753 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
2582 1754
2583 clocks = <&gcc GCC_BL 1755 clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
2584 <&gcc GCC_BL 1756 <&gcc GCC_BLSP2_AHB_CLK>;
2585 clock-names = "core", 1757 clock-names = "core", "iface";
2586 dmas = <&blsp2_dma 12 <<
2587 dma-names = "tx", "rx <<
2588 pinctrl-names = "defa <<
2589 pinctrl-0 = <&blsp2_i <<
2590 pinctrl-1 = <&blsp2_i <<
2591 clock-frequency = <40 1758 clock-frequency = <400000>;
2592 1759
2593 status = "disabled"; 1760 status = "disabled";
2594 #address-cells = <1>; 1761 #address-cells = <1>;
2595 #size-cells = <0>; 1762 #size-cells = <0>;
2596 }; 1763 };
2597 1764
2598 blsp2_i2c5: i2c@c1b9000 { !! 1765 blsp2_i2c4: i2c@c1b9000 {
2599 compatible = "qcom,i2 1766 compatible = "qcom,i2c-qup-v2.2.1";
2600 reg = <0x0c1b9000 0x6 1767 reg = <0x0c1b9000 0x600>;
2601 interrupts = <GIC_SPI 1768 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
2602 1769
2603 clocks = <&gcc GCC_BL 1770 clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
2604 <&gcc GCC_BL 1771 <&gcc GCC_BLSP2_AHB_CLK>;
2605 clock-names = "core", 1772 clock-names = "core", "iface";
2606 dmas = <&blsp2_dma 14 <<
2607 dma-names = "tx", "rx <<
2608 pinctrl-names = "defa <<
2609 pinctrl-0 = <&blsp2_i <<
2610 pinctrl-1 = <&blsp2_i <<
2611 clock-frequency = <40 1773 clock-frequency = <400000>;
2612 1774
2613 status = "disabled"; 1775 status = "disabled";
2614 #address-cells = <1>; 1776 #address-cells = <1>;
2615 #size-cells = <0>; 1777 #size-cells = <0>;
2616 }; 1778 };
2617 1779
2618 blsp2_i2c6: i2c@c1ba000 { !! 1780 blsp2_i2c5: i2c@c1ba000 {
2619 compatible = "qcom,i2 1781 compatible = "qcom,i2c-qup-v2.2.1";
2620 reg = <0x0c1ba000 0x6 1782 reg = <0x0c1ba000 0x600>;
2621 interrupts = <GIC_SPI 1783 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
2622 1784
2623 clocks = <&gcc GCC_BL 1785 clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
2624 <&gcc GCC_BL 1786 <&gcc GCC_BLSP2_AHB_CLK>;
2625 clock-names = "core", 1787 clock-names = "core", "iface";
2626 dmas = <&blsp2_dma 16 <<
2627 dma-names = "tx", "rx <<
2628 pinctrl-names = "defa <<
2629 pinctrl-0 = <&blsp2_i <<
2630 pinctrl-1 = <&blsp2_i <<
2631 clock-frequency = <40 1788 clock-frequency = <400000>;
2632 1789
2633 status = "disabled"; 1790 status = "disabled";
2634 #address-cells = <1>; 1791 #address-cells = <1>;
2635 #size-cells = <0>; 1792 #size-cells = <0>;
2636 }; 1793 };
2637 1794
2638 blsp2_spi1: spi@c1b5000 { <<
2639 compatible = "qcom,sp <<
2640 reg = <0x0c1b5000 0x6 <<
2641 interrupts = <GIC_SPI <<
2642 <<
2643 clocks = <&gcc GCC_BL <<
2644 <&gcc GCC_BL <<
2645 clock-names = "core", <<
2646 dmas = <&blsp2_dma 6> <<
2647 dma-names = "tx", "rx <<
2648 pinctrl-names = "defa <<
2649 pinctrl-0 = <&blsp2_s <<
2650 <<
2651 status = "disabled"; <<
2652 #address-cells = <1>; <<
2653 #size-cells = <0>; <<
2654 }; <<
2655 <<
2656 blsp2_spi2: spi@c1b6000 { <<
2657 compatible = "qcom,sp <<
2658 reg = <0x0c1b6000 0x6 <<
2659 interrupts = <GIC_SPI <<
2660 <<
2661 clocks = <&gcc GCC_BL <<
2662 <&gcc GCC_BL <<
2663 clock-names = "core", <<
2664 dmas = <&blsp2_dma 8> <<
2665 dma-names = "tx", "rx <<
2666 pinctrl-names = "defa <<
2667 pinctrl-0 = <&blsp2_s <<
2668 <<
2669 status = "disabled"; <<
2670 #address-cells = <1>; <<
2671 #size-cells = <0>; <<
2672 }; <<
2673 <<
2674 blsp2_spi3: spi@c1b7000 { <<
2675 compatible = "qcom,sp <<
2676 reg = <0x0c1b7000 0x6 <<
2677 interrupts = <GIC_SPI <<
2678 <<
2679 clocks = <&gcc GCC_BL <<
2680 <&gcc GCC_BL <<
2681 clock-names = "core", <<
2682 dmas = <&blsp2_dma 10 <<
2683 dma-names = "tx", "rx <<
2684 pinctrl-names = "defa <<
2685 pinctrl-0 = <&blsp2_s <<
2686 <<
2687 status = "disabled"; <<
2688 #address-cells = <1>; <<
2689 #size-cells = <0>; <<
2690 }; <<
2691 <<
2692 blsp2_spi4: spi@c1b8000 { <<
2693 compatible = "qcom,sp <<
2694 reg = <0x0c1b8000 0x6 <<
2695 interrupts = <GIC_SPI <<
2696 <<
2697 clocks = <&gcc GCC_BL <<
2698 <&gcc GCC_BL <<
2699 clock-names = "core", <<
2700 dmas = <&blsp2_dma 12 <<
2701 dma-names = "tx", "rx <<
2702 pinctrl-names = "defa <<
2703 pinctrl-0 = <&blsp2_s <<
2704 <<
2705 status = "disabled"; <<
2706 #address-cells = <1>; <<
2707 #size-cells = <0>; <<
2708 }; <<
2709 <<
2710 blsp2_spi5: spi@c1b9000 { <<
2711 compatible = "qcom,sp <<
2712 reg = <0x0c1b9000 0x6 <<
2713 interrupts = <GIC_SPI <<
2714 <<
2715 clocks = <&gcc GCC_BL <<
2716 <&gcc GCC_BL <<
2717 clock-names = "core", <<
2718 dmas = <&blsp2_dma 14 <<
2719 dma-names = "tx", "rx <<
2720 pinctrl-names = "defa <<
2721 pinctrl-0 = <&blsp2_s <<
2722 <<
2723 status = "disabled"; <<
2724 #address-cells = <1>; <<
2725 #size-cells = <0>; <<
2726 }; <<
2727 <<
2728 blsp2_spi6: spi@c1ba000 { <<
2729 compatible = "qcom,sp <<
2730 reg = <0x0c1ba000 0x6 <<
2731 interrupts = <GIC_SPI <<
2732 <<
2733 clocks = <&gcc GCC_BL <<
2734 <&gcc GCC_BL <<
2735 clock-names = "core", <<
2736 dmas = <&blsp2_dma 16 <<
2737 dma-names = "tx", "rx <<
2738 pinctrl-names = "defa <<
2739 pinctrl-0 = <&blsp2_s <<
2740 <<
2741 status = "disabled"; <<
2742 #address-cells = <1>; <<
2743 #size-cells = <0>; <<
2744 }; <<
2745 <<
2746 mmcc: clock-controller@c8c000 <<
2747 compatible = "qcom,mm <<
2748 #clock-cells = <1>; <<
2749 #reset-cells = <1>; <<
2750 #power-domain-cells = <<
2751 reg = <0xc8c0000 0x40 <<
2752 <<
2753 clock-names = "xo", <<
2754 "gpll0" <<
2755 "dsi0ds <<
2756 "dsi0by <<
2757 "dsi1ds <<
2758 "dsi1by <<
2759 "hdmipl <<
2760 "dplink <<
2761 "dpvco" <<
2762 "gpll0_ <<
2763 clocks = <&rpmcc RPM_ <<
2764 <&gcc GCC_MM <<
2765 <&mdss_dsi0_ <<
2766 <&mdss_dsi0_ <<
2767 <&mdss_dsi1_ <<
2768 <&mdss_dsi1_ <<
2769 <0>, <<
2770 <0>, <<
2771 <0>, <<
2772 <&gcc GCC_MM <<
2773 }; <<
2774 <<
2775 mdss: display-subsystem@c9000 <<
2776 compatible = "qcom,ms <<
2777 reg = <0x0c900000 0x1 <<
2778 reg-names = "mdss"; <<
2779 <<
2780 interrupts = <GIC_SPI <<
2781 interrupt-controller; <<
2782 #interrupt-cells = <1 <<
2783 <<
2784 clocks = <&mmcc MDSS_ <<
2785 <&mmcc MDSS_ <<
2786 <&mmcc MDSS_ <<
2787 clock-names = "iface" <<
2788 "bus", <<
2789 "core"; <<
2790 <<
2791 power-domains = <&mmc <<
2792 iommus = <&mmss_smmu <<
2793 <<
2794 #address-cells = <1>; <<
2795 #size-cells = <1>; <<
2796 ranges; <<
2797 <<
2798 status = "disabled"; <<
2799 <<
2800 mdss_mdp: display-con <<
2801 compatible = <<
2802 reg = <0x0c90 <<
2803 <0x0c9a <<
2804 <0x0c9b <<
2805 <0x0c9b <<
2806 reg-names = " <<
2807 " <<
2808 " <<
2809 " <<
2810 <<
2811 interrupt-par <<
2812 interrupts = <<
2813 <<
2814 clocks = <&mm <<
2815 <&mm <<
2816 <&mm <<
2817 <&mm <<
2818 <&mm <<
2819 clock-names = <<
2820 <<
2821 <<
2822 <<
2823 <<
2824 <<
2825 assigned-cloc <<
2826 assigned-cloc <<
2827 <<
2828 operating-poi <<
2829 power-domains <<
2830 <<
2831 mdp_opp_table <<
2832 compa <<
2833 <<
2834 opp-1 <<
2835 <<
2836 <<
2837 }; <<
2838 <<
2839 opp-2 <<
2840 <<
2841 <<
2842 }; <<
2843 <<
2844 opp-3 <<
2845 <<
2846 <<
2847 }; <<
2848 <<
2849 opp-4 <<
2850 <<
2851 <<
2852 }; <<
2853 }; <<
2854 <<
2855 ports { <<
2856 #addr <<
2857 #size <<
2858 <<
2859 port@ <<
2860 <<
2861 <<
2862 <<
2863 <<
2864 <<
2865 }; <<
2866 <<
2867 port@ <<
2868 <<
2869 <<
2870 <<
2871 <<
2872 <<
2873 }; <<
2874 }; <<
2875 }; <<
2876 <<
2877 mdss_dsi0: dsi@c99400 <<
2878 compatible = <<
2879 reg = <0x0c99 <<
2880 reg-names = " <<
2881 <<
2882 interrupt-par <<
2883 interrupts = <<
2884 <<
2885 clocks = <&mm <<
2886 <&mm <<
2887 <&mm <<
2888 <&mm <<
2889 <&mm <<
2890 <&mm <<
2891 clock-names = <<
2892 <<
2893 <<
2894 <<
2895 <<
2896 <<
2897 assigned-cloc <<
2898 <<
2899 assigned-cloc <<
2900 <<
2901 <<
2902 operating-poi <<
2903 power-domains <<
2904 <<
2905 phys = <&mdss <<
2906 phy-names = " <<
2907 <<
2908 #address-cell <<
2909 #size-cells = <<
2910 <<
2911 status = "dis <<
2912 <<
2913 ports { <<
2914 #addr <<
2915 #size <<
2916 <<
2917 port@ <<
2918 <<
2919 <<
2920 <<
2921 <<
2922 <<
2923 }; <<
2924 <<
2925 port@ <<
2926 <<
2927 <<
2928 <<
2929 <<
2930 }; <<
2931 }; <<
2932 }; <<
2933 <<
2934 mdss_dsi0_phy: phy@c9 <<
2935 compatible = <<
2936 reg = <0x0c99 <<
2937 <0x0c99 <<
2938 <0x0c99 <<
2939 reg-names = " <<
2940 " <<
2941 " <<
2942 <<
2943 clocks = <&mm <<
2944 <&rp <<
2945 clock-names = <<
2946 <<
2947 #clock-cells <<
2948 #phy-cells = <<
2949 <<
2950 status = "dis <<
2951 }; <<
2952 <<
2953 mdss_dsi1: dsi@c99600 <<
2954 compatible = <<
2955 reg = <0x0c99 <<
2956 reg-names = " <<
2957 <<
2958 interrupt-par <<
2959 interrupts = <<
2960 <<
2961 clocks = <&mm <<
2962 <&mm <<
2963 <&mm <<
2964 <&mm <<
2965 <&mm <<
2966 <&mm <<
2967 clock-names = <<
2968 <<
2969 <<
2970 <<
2971 <<
2972 <<
2973 assigned-cloc <<
2974 <<
2975 assigned-cloc <<
2976 <<
2977 <<
2978 operating-poi <<
2979 power-domains <<
2980 <<
2981 phys = <&mdss <<
2982 phy-names = " <<
2983 <<
2984 #address-cell <<
2985 #size-cells = <<
2986 <<
2987 status = "dis <<
2988 <<
2989 ports { <<
2990 #addr <<
2991 #size <<
2992 <<
2993 port@ <<
2994 <<
2995 <<
2996 <<
2997 <<
2998 <<
2999 }; <<
3000 <<
3001 port@ <<
3002 <<
3003 <<
3004 <<
3005 <<
3006 }; <<
3007 }; <<
3008 }; <<
3009 <<
3010 mdss_dsi1_phy: phy@c9 <<
3011 compatible = <<
3012 reg = <0x0c99 <<
3013 <0x0c99 <<
3014 <0x0c99 <<
3015 reg-names = " <<
3016 " <<
3017 " <<
3018 <<
3019 clocks = <&mm <<
3020 <&rp <<
3021 clock-names = <<
3022 <<
3023 <<
3024 #clock-cells <<
3025 #phy-cells = <<
3026 <<
3027 status = "dis <<
3028 }; <<
3029 }; <<
3030 <<
3031 venus: video-codec@cc00000 { <<
3032 compatible = "qcom,ms <<
3033 reg = <0x0cc00000 0xf <<
3034 interrupts = <GIC_SPI <<
3035 power-domains = <&mmc <<
3036 clocks = <&mmcc VIDEO <<
3037 <&mmcc VIDEO <<
3038 <&mmcc VIDEO <<
3039 <&mmcc VIDEO <<
3040 clock-names = "core", <<
3041 iommus = <&mmss_smmu <<
3042 <&mmss_smmu <<
3043 <&mmss_smmu <<
3044 <&mmss_smmu <<
3045 <&mmss_smmu <<
3046 <&mmss_smmu <<
3047 <&mmss_smmu <<
3048 <&mmss_smmu <<
3049 <&mmss_smmu <<
3050 <&mmss_smmu <<
3051 <&mmss_smmu <<
3052 <&mmss_smmu <<
3053 <&mmss_smmu <<
3054 <&mmss_smmu <<
3055 <&mmss_smmu <<
3056 <&mmss_smmu <<
3057 <&mmss_smmu <<
3058 <&mmss_smmu <<
3059 <&mmss_smmu <<
3060 <&mmss_smmu <<
3061 memory-region = <&ven <<
3062 status = "disabled"; <<
3063 <<
3064 video-decoder { <<
3065 compatible = <<
3066 clocks = <&mm <<
3067 clock-names = <<
3068 power-domains <<
3069 }; <<
3070 <<
3071 video-encoder { <<
3072 compatible = <<
3073 clocks = <&mm <<
3074 clock-names = <<
3075 power-domains <<
3076 }; <<
3077 }; <<
3078 <<
3079 mmss_smmu: iommu@cd00000 { <<
3080 compatible = "qcom,ms <<
3081 reg = <0x0cd00000 0x4 <<
3082 #iommu-cells = <1>; <<
3083 <<
3084 clocks = <&mmcc MNOC_ <<
3085 <&mmcc BIMC_ <<
3086 <&mmcc BIMC_ <<
3087 clock-names = "iface- <<
3088 "iface- <<
3089 "bus-sm <<
3090 <<
3091 #global-interrupts = <<
3092 interrupts = <<
3093 <GIC_SPI 263 <<
3094 <GIC_SPI 266 <<
3095 <GIC_SPI 267 <<
3096 <GIC_SPI 268 <<
3097 <GIC_SPI 244 <<
3098 <GIC_SPI 245 <<
3099 <GIC_SPI 247 <<
3100 <GIC_SPI 248 <<
3101 <GIC_SPI 249 <<
3102 <GIC_SPI 250 <<
3103 <GIC_SPI 251 <<
3104 <GIC_SPI 252 <<
3105 <GIC_SPI 253 <<
3106 <GIC_SPI 254 <<
3107 <GIC_SPI 255 <<
3108 <GIC_SPI 256 <<
3109 <GIC_SPI 260 <<
3110 <GIC_SPI 261 <<
3111 <GIC_SPI 262 <<
3112 <GIC_SPI 272 <<
3113 <<
3114 power-domains = <&mmc <<
3115 }; <<
3116 <<
3117 remoteproc_adsp: remoteproc@1 <<
3118 compatible = "qcom,ms <<
3119 reg = <0x17300000 0x4 <<
3120 <<
3121 interrupts-extended = <<
3122 <<
3123 <<
3124 <<
3125 <<
3126 interrupt-names = "wd <<
3127 "ha <<
3128 <<
3129 clocks = <&rpmcc RPM_ <<
3130 clock-names = "xo"; <<
3131 <<
3132 memory-region = <&ads <<
3133 <<
3134 qcom,smem-states = <& <<
3135 qcom,smem-state-names <<
3136 <<
3137 power-domains = <&rpm <<
3138 power-domain-names = <<
3139 <<
3140 status = "disabled"; <<
3141 <<
3142 glink-edge { <<
3143 interrupts = <<
3144 label = "lpas <<
3145 qcom,remote-p <<
3146 mboxes = <&ap <<
3147 }; <<
3148 }; <<
3149 <<
3150 apcs_glb: mailbox@17911000 { 1795 apcs_glb: mailbox@17911000 {
3151 compatible = "qcom,ms !! 1796 compatible = "qcom,msm8998-apcs-hmss-global";
3152 "qcom,ms <<
3153 reg = <0x17911000 0x1 1797 reg = <0x17911000 0x1000>;
3154 1798
3155 #mbox-cells = <1>; 1799 #mbox-cells = <1>;
3156 }; 1800 };
3157 1801
3158 timer@17920000 { 1802 timer@17920000 {
3159 #address-cells = <1>; 1803 #address-cells = <1>;
3160 #size-cells = <1>; 1804 #size-cells = <1>;
3161 ranges; 1805 ranges;
3162 compatible = "arm,arm 1806 compatible = "arm,armv7-timer-mem";
3163 reg = <0x17920000 0x1 1807 reg = <0x17920000 0x1000>;
3164 1808
3165 frame@17921000 { 1809 frame@17921000 {
3166 frame-number 1810 frame-number = <0>;
3167 interrupts = 1811 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3168 1812 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
3169 reg = <0x1792 1813 reg = <0x17921000 0x1000>,
3170 <0x1792 1814 <0x17922000 0x1000>;
3171 }; 1815 };
3172 1816
3173 frame@17923000 { 1817 frame@17923000 {
3174 frame-number 1818 frame-number = <1>;
3175 interrupts = 1819 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3176 reg = <0x1792 1820 reg = <0x17923000 0x1000>;
3177 status = "dis 1821 status = "disabled";
3178 }; 1822 };
3179 1823
3180 frame@17924000 { 1824 frame@17924000 {
3181 frame-number 1825 frame-number = <2>;
3182 interrupts = 1826 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3183 reg = <0x1792 1827 reg = <0x17924000 0x1000>;
3184 status = "dis 1828 status = "disabled";
3185 }; 1829 };
3186 1830
3187 frame@17925000 { 1831 frame@17925000 {
3188 frame-number 1832 frame-number = <3>;
3189 interrupts = 1833 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3190 reg = <0x1792 1834 reg = <0x17925000 0x1000>;
3191 status = "dis 1835 status = "disabled";
3192 }; 1836 };
3193 1837
3194 frame@17926000 { 1838 frame@17926000 {
3195 frame-number 1839 frame-number = <4>;
3196 interrupts = 1840 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3197 reg = <0x1792 1841 reg = <0x17926000 0x1000>;
3198 status = "dis 1842 status = "disabled";
3199 }; 1843 };
3200 1844
3201 frame@17927000 { 1845 frame@17927000 {
3202 frame-number 1846 frame-number = <5>;
3203 interrupts = 1847 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3204 reg = <0x1792 1848 reg = <0x17927000 0x1000>;
3205 status = "dis 1849 status = "disabled";
3206 }; 1850 };
3207 1851
3208 frame@17928000 { 1852 frame@17928000 {
3209 frame-number 1853 frame-number = <6>;
3210 interrupts = 1854 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3211 reg = <0x1792 1855 reg = <0x17928000 0x1000>;
3212 status = "dis 1856 status = "disabled";
3213 }; 1857 };
3214 }; 1858 };
3215 1859
3216 intc: interrupt-controller@17 1860 intc: interrupt-controller@17a00000 {
3217 compatible = "arm,gic 1861 compatible = "arm,gic-v3";
3218 reg = <0x17a00000 0x1 1862 reg = <0x17a00000 0x10000>, /* GICD */
3219 <0x17b00000 0x1 1863 <0x17b00000 0x100000>; /* GICR * 8 */
3220 #interrupt-cells = <3 1864 #interrupt-cells = <3>;
3221 #address-cells = <1>; 1865 #address-cells = <1>;
3222 #size-cells = <1>; 1866 #size-cells = <1>;
3223 ranges; 1867 ranges;
3224 interrupt-controller; 1868 interrupt-controller;
3225 #redistributor-region 1869 #redistributor-regions = <1>;
3226 redistributor-stride 1870 redistributor-stride = <0x0 0x20000>;
3227 interrupts = <GIC_PPI 1871 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3228 }; 1872 };
3229 <<
3230 wifi: wifi@18800000 { <<
3231 compatible = "qcom,wc <<
3232 status = "disabled"; <<
3233 reg = <0x18800000 0x8 <<
3234 reg-names = "membase" <<
3235 memory-region = <&wla <<
3236 clocks = <&rpmcc RPM_ <<
3237 clock-names = "cxo_re <<
3238 interrupts = <<
3239 <GIC_SPI 413 <<
3240 <GIC_SPI 414 <<
3241 <GIC_SPI 415 <<
3242 <GIC_SPI 416 <<
3243 <GIC_SPI 417 <<
3244 <GIC_SPI 418 <<
3245 <GIC_SPI 420 <<
3246 <GIC_SPI 421 <<
3247 <GIC_SPI 422 <<
3248 <GIC_SPI 423 <<
3249 <GIC_SPI 424 <<
3250 <GIC_SPI 425 <<
3251 iommus = <&anoc2_smmu <<
3252 <&anoc2_smmu <<
3253 qcom,snoc-host-cap-8b <<
3254 qcom,no-msa-ready-ind <<
3255 }; <<
3256 }; 1873 };
3257 }; 1874 };
>> 1875
>> 1876 #include "msm8998-pins.dtsi"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.