1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2021, Linaro Limited
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/regulator/qcom,rpmh-regu
9 #include <dt-bindings/gpio/gpio.h>
10 #include "sa8155p.dtsi"
11 #include "pmm8155au_1.dtsi"
12 #include "pmm8155au_2.dtsi"
13
14 / {
15 model = "Qualcomm Technologies, Inc. S
16 compatible = "qcom,sa8155p-adp", "qcom
17
18 aliases {
19 serial0 = &uart2;
20 serial1 = &uart9;
21 };
22
23 chosen {
24 stdout-path = "serial0:115200n
25 };
26
27 vreg_3p3: vreg-3p3-regulator {
28 compatible = "regulator-fixed"
29 regulator-name = "vreg_3p3";
30 regulator-min-microvolt = <330
31 regulator-max-microvolt = <330
32 };
33
34 /*
35 * S4A is always on and not controllab
36 * So model it as a fixed regulator.
37 */
38 vreg_s4a_1p8: smps4 {
39 compatible = "regulator-fixed"
40 regulator-name = "vreg_s4a_1p8
41
42 regulator-min-microvolt = <180
43 regulator-max-microvolt = <180
44
45 regulator-always-on;
46 regulator-boot-on;
47
48 vin-supply = <&vreg_3p3>;
49 };
50 };
51
52 &apps_rsc {
53 regulators-0 {
54 compatible = "qcom,pmm8155au-r
55 qcom,pmic-id = "a";
56
57 vdd-s1-supply = <&vreg_3p3>;
58 vdd-s2-supply = <&vreg_3p3>;
59 vdd-s3-supply = <&vreg_3p3>;
60 vdd-s4-supply = <&vreg_3p3>;
61 vdd-s5-supply = <&vreg_3p3>;
62 vdd-s6-supply = <&vreg_3p3>;
63 vdd-s7-supply = <&vreg_3p3>;
64 vdd-s8-supply = <&vreg_3p3>;
65 vdd-s9-supply = <&vreg_3p3>;
66 vdd-s10-supply = <&vreg_3p3>;
67
68 vdd-l1-l8-l11-supply = <&vreg_
69 vdd-l2-l10-supply = <&vreg_3p3
70 vdd-l3-l4-l5-l18-supply = <&vr
71 vdd-l6-l9-supply = <&vreg_s6a_
72 vdd-l7-l12-l14-l15-supply = <&
73 vdd-l13-l16-l17-supply = <&vre
74
75 vreg_s5a_2p04: smps5 {
76 regulator-name = "vreg
77 regulator-min-microvol
78 regulator-max-microvol
79 };
80
81 vreg_s6a_0p92: smps6 {
82 regulator-name = "vreg
83 regulator-min-microvol
84 regulator-max-microvol
85 };
86
87 vreg_l1a_0p752: ldo1 {
88 regulator-name = "vreg
89 regulator-min-microvol
90 regulator-max-microvol
91 regulator-initial-mode
92 };
93
94 vdda_usb_hs_3p1:
95 vreg_l2a_3p072: ldo2 {
96 regulator-name = "vreg
97 regulator-min-microvol
98 regulator-max-microvol
99 regulator-initial-mode
100 };
101
102 vreg_l3a_0p8: ldo3 {
103 regulator-name = "vreg
104 regulator-min-microvol
105 regulator-max-microvol
106 regulator-initial-mode
107 };
108
109 vdd_usb_hs_core:
110 vdda_usb_ss_dp_core_1:
111 vreg_l5a_0p88: ldo5 {
112 regulator-name = "vreg
113 regulator-min-microvol
114 regulator-max-microvol
115 regulator-initial-mode
116 regulator-allow-set-lo
117 regulator-allowed-mode
118
119 };
120
121 vreg_l7a_1p8: ldo7 {
122 regulator-name = "vreg
123 regulator-min-microvol
124 regulator-max-microvol
125 regulator-initial-mode
126 };
127
128 vreg_l10a_2p96: ldo10 {
129 regulator-name = "vreg
130 regulator-min-microvol
131 regulator-max-microvol
132 regulator-initial-mode
133 regulator-allow-set-lo
134 regulator-allowed-mode
135
136 };
137
138 vreg_l11a_0p8: ldo11 {
139 regulator-name = "vreg
140 regulator-min-microvol
141 regulator-max-microvol
142 regulator-initial-mode
143 };
144
145 vdda_usb_hs_1p8:
146 vreg_l12a_1p8: ldo12 {
147 regulator-name = "vreg
148 regulator-min-microvol
149 regulator-max-microvol
150 regulator-initial-mode
151 };
152
153 vreg_l13a_2p7: ldo13 {
154 regulator-name = "vreg
155 regulator-min-microvol
156 regulator-max-microvol
157 regulator-initial-mode
158 };
159
160 vreg_l15a_1p7: ldo15 {
161 regulator-name = "vreg
162 regulator-min-microvol
163 regulator-max-microvol
164 regulator-initial-mode
165 };
166
167 vreg_l16a_2p7: ldo16 {
168 regulator-name = "vreg
169 regulator-min-microvol
170 regulator-max-microvol
171 regulator-initial-mode
172 };
173
174 vreg_l17a_2p96: ldo17 {
175 regulator-name = "vreg
176 regulator-min-microvol
177 regulator-max-microvol
178 regulator-initial-mode
179 };
180 };
181
182 regulators-1 {
183 compatible = "qcom,pmm8155au-r
184 qcom,pmic-id = "c";
185
186 vdd-s1-supply = <&vreg_3p3>;
187 vdd-s2-supply = <&vreg_3p3>;
188 vdd-s3-supply = <&vreg_3p3>;
189 vdd-s4-supply = <&vreg_3p3>;
190 vdd-s5-supply = <&vreg_3p3>;
191 vdd-s6-supply = <&vreg_3p3>;
192 vdd-s7-supply = <&vreg_3p3>;
193 vdd-s8-supply = <&vreg_3p3>;
194 vdd-s9-supply = <&vreg_3p3>;
195 vdd-s10-supply = <&vreg_3p3>;
196
197 vdd-l1-l8-l11-supply = <&vreg_
198 vdd-l2-l10-supply = <&vreg_3p3
199 vdd-l3-l4-l5-l18-supply = <&vr
200 vdd-l6-l9-supply = <&vreg_s6c_
201 vdd-l7-l12-l14-l15-supply = <&
202 vdd-l13-l16-l17-supply = <&vre
203
204 vreg_s4c_1p352: smps4 {
205 regulator-name = "vreg
206 regulator-min-microvol
207 regulator-max-microvol
208 };
209
210 vreg_s5c_2p04: smps5 {
211 regulator-name = "vreg
212 regulator-min-microvol
213 regulator-max-microvol
214 };
215
216 vreg_s6c_1p128: smps6 {
217 regulator-name = "vreg
218 regulator-min-microvol
219 regulator-max-microvol
220 };
221
222 vreg_l1c_1p304: ldo1 {
223 regulator-name = "vreg
224 regulator-min-microvol
225 regulator-max-microvol
226 regulator-initial-mode
227 };
228
229 vreg_l2c_1p808: ldo2 {
230 regulator-name = "vreg
231 regulator-min-microvol
232 regulator-max-microvol
233 regulator-initial-mode
234 };
235
236 vreg_l5c_1p2: ldo5 {
237 regulator-name = "vreg
238 regulator-min-microvol
239 regulator-max-microvol
240 regulator-initial-mode
241 regulator-allow-set-lo
242 regulator-allowed-mode
243
244 };
245
246 vreg_l7c_1p8: ldo7 {
247 regulator-name = "vreg
248 regulator-min-microvol
249 regulator-max-microvol
250 regulator-initial-mode
251 };
252
253 vreg_l8c_1p2: ldo8 {
254 regulator-name = "vreg
255 regulator-min-microvol
256 regulator-max-microvol
257 regulator-initial-mode
258 regulator-allow-set-lo
259 regulator-allowed-mode
260
261 };
262
263 vreg_l10c_3p3: ldo10 {
264 regulator-name = "vreg
265 regulator-min-microvol
266 regulator-max-microvol
267 regulator-initial-mode
268 };
269
270 vreg_l11c_0p8: ldo11 {
271 regulator-name = "vreg
272 regulator-min-microvol
273 regulator-max-microvol
274 regulator-initial-mode
275 };
276
277 vreg_l12c_1p808: ldo12 {
278 regulator-name = "vreg
279 regulator-min-microvol
280 regulator-max-microvol
281 regulator-initial-mode
282 };
283
284 vreg_l13c_2p96: ldo13 {
285 regulator-name = "vreg
286 regulator-min-microvol
287 regulator-max-microvol
288 regulator-initial-mode
289 };
290
291 vreg_l15c_1p9: ldo15 {
292 regulator-name = "vreg
293 regulator-min-microvol
294 regulator-max-microvol
295 regulator-initial-mode
296 };
297
298 vreg_l16c_3p008: ldo16 {
299 regulator-name = "vreg
300 regulator-min-microvol
301 regulator-max-microvol
302 regulator-initial-mode
303 };
304
305 vreg_l18c_0p88: ldo18 {
306 regulator-name = "vreg
307 regulator-min-microvol
308 regulator-max-microvol
309 regulator-initial-mode
310 };
311 };
312 };
313
314 ðernet {
315 status = "okay";
316
317 snps,reset-gpio = <&tlmm 79 GPIO_ACTIV
318 snps,reset-active-low;
319 snps,reset-delays-us = <0 11000 70000>
320
321 snps,mtl-rx-config = <&mtl_rx_setup>;
322 snps,mtl-tx-config = <&mtl_tx_setup>;
323
324 pinctrl-names = "default";
325 pinctrl-0 = <ðernet_defaults>;
326
327 phy-handle = <&rgmii_phy>;
328 phy-mode = "rgmii";
329 max-speed = <1000>;
330
331 mdio {
332 compatible = "snps,dwmac-mdio"
333 #address-cells = <1>;
334 #size-cells = <0>;
335
336 /* Micrel KSZ9031RNZ PHY */
337 rgmii_phy: phy@7 {
338 compatible = "ethernet
339 reg = <0x7>;
340
341 interrupts-extended =
342 device_type = "etherne
343 };
344 };
345
346 mtl_rx_setup: rx-queues-config {
347 snps,rx-queues-to-use = <1>;
348 snps,rx-sched-sp;
349
350 queue0 {
351 snps,dcb-algorithm;
352 snps,map-to-dma-channe
353 snps,route-up;
354 snps,priority = <0x1>;
355 };
356 };
357
358 mtl_tx_setup: tx-queues-config {
359 snps,tx-queues-to-use = <1>;
360 snps,tx-sched-wrr;
361
362 queue0 {
363 snps,weight = <0x10>;
364 snps,dcb-algorithm;
365 snps,priority = <0x0>;
366 };
367 };
368 };
369
370 &pmm8155au_1_gpios {
371 pmm8155au_1_sdc2_cd: sdc2-cd-default-s
372 pins = "gpio4";
373 function = "normal";
374 input-enable;
375 bias-pull-up;
376 power-source = <0>;
377 };
378 };
379
380 &qupv3_id_1 {
381 status = "okay";
382 };
383
384 &remoteproc_adsp {
385 status = "okay";
386 firmware-name = "qcom/sa8155p/adsp.mdt
387 };
388
389 &remoteproc_cdsp {
390 status = "okay";
391 firmware-name = "qcom/sa8155p/cdsp.mdt
392 };
393
394 &sdhc_2 {
395 status = "okay";
396
397 cd-gpios = <&pmm8155au_1_gpios 4 GPIO_
398 pinctrl-names = "default", "sleep";
399 pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc
400 pinctrl-1 = <&sdc2_off &pmm8155au_1_sd
401 vqmmc-supply = <&vreg_l13c_2p96>; /* I
402 vmmc-supply = <&vreg_l17a_2p96>; /* C
403 bus-width = <4>;
404 no-sdio;
405 no-mmc;
406 };
407
408 &uart2 {
409 status = "okay";
410 };
411
412 &uart9 {
413 status = "okay";
414 };
415
416 &ufs_mem_hc {
417 status = "okay";
418
419 reset-gpios = <&tlmm 175 GPIO_ACTIVE_L
420
421 vcc-supply = <&vreg_l10a_2p96>;
422 vcc-max-microamp = <750000>;
423 vccq-supply = <&vreg_l5c_1p2>;
424 vccq-max-microamp = <700000>;
425 vccq2-supply = <&vreg_s4a_1p8>;
426 vccq2-max-microamp = <750000>;
427 };
428
429 &ufs_mem_phy {
430 status = "okay";
431
432 vdda-phy-supply = <&vreg_l8c_1p2>;
433 vdda-pll-supply = <&vreg_l5a_0p88>;
434 };
435
436 &usb_1 {
437 status = "okay";
438 };
439
440 &usb_1_dwc3 {
441 dr_mode = "host";
442
443 pinctrl-names = "default";
444 pinctrl-0 = <&usb2phy_ac_en1_default>;
445 };
446
447 &usb_1_hsphy {
448 status = "okay";
449 vdda-pll-supply = <&vdd_usb_hs_core>;
450 vdda33-supply = <&vdda_usb_hs_3p1>;
451 vdda18-supply = <&vdda_usb_hs_1p8>;
452 };
453
454 &usb_1_qmpphy {
455 status = "disabled";
456 };
457
458 &usb_2 {
459 status = "okay";
460 };
461
462 &usb_2_dwc3 {
463 dr_mode = "host";
464
465 pinctrl-names = "default";
466 pinctrl-0 = <&usb2phy_ac_en2_default>;
467 };
468
469 &usb_2_hsphy {
470 status = "okay";
471 vdda-pll-supply = <&vdd_usb_hs_core>;
472 vdda33-supply = <&vdda_usb_hs_3p1>;
473 vdda18-supply = <&vdda_usb_hs_1p8>;
474 };
475
476 &usb_2_qmpphy {
477 status = "okay";
478 vdda-phy-supply = <&vreg_l8c_1p2>;
479 vdda-pll-supply = <&vdda_usb_ss_dp_cor
480 };
481
482 &pcie0 {
483 status = "okay";
484 };
485
486 &pcie0_phy {
487 status = "okay";
488 vdda-phy-supply = <&vreg_l18c_0p88>;
489 vdda-pll-supply = <&vreg_l8c_1p2>;
490 };
491
492 &pcie1_phy {
493 vdda-phy-supply = <&vreg_l18c_0p88>;
494 vdda-pll-supply = <&vreg_l8c_1p2>;
495 };
496
497 &tlmm {
498 gpio-reserved-ranges = <0 4>;
499
500 sdc2_on: sdc2-on-state {
501 clk-pins {
502 pins = "sdc2_clk";
503 bias-disable;
504 drive-strength = <16>;
505 };
506
507 cmd-pins {
508 pins = "sdc2_cmd";
509 bias-pull-up;
510 drive-strength = <16>;
511 };
512
513 data-pins {
514 pins = "sdc2_data";
515 bias-pull-up;
516 drive-strength = <16>;
517 };
518 };
519
520 sdc2_off: sdc2-off-state {
521 clk-pins {
522 pins = "sdc2_clk";
523 bias-disable;
524 drive-strength = <2>;
525 };
526
527 cmd-pins {
528 pins = "sdc2_cmd";
529 bias-pull-up;
530 drive-strength = <2>;
531 };
532
533 data-pins {
534 pins = "sdc2_data";
535 bias-pull-up;
536 drive-strength = <2>;
537 };
538 };
539
540 usb2phy_ac_en1_default: usb2phy-ac-en1
541 pins = "gpio113";
542 function = "usb2phy_ac";
543 bias-disable;
544 drive-strength = <2>;
545 };
546
547 usb2phy_ac_en2_default: usb2phy-ac-en2
548 pins = "gpio123";
549 function = "usb2phy_ac";
550 bias-disable;
551 drive-strength = <2>;
552 };
553
554 ethernet_defaults: ethernet-defaults-s
555 mdc-pins {
556 pins = "gpio7";
557 function = "rgmii";
558 bias-pull-up;
559 };
560
561 mdio-pins {
562 pins = "gpio59";
563 function = "rgmii";
564 bias-pull-up;
565 };
566
567 rgmii-rx-pins {
568 pins = "gpio117", "gpi
569 function = "rgmii";
570 bias-disable;
571 drive-strength = <2>;
572 };
573
574 rgmii-tx-pins {
575 pins = "gpio122", "gpi
576 function = "rgmii";
577 bias-pull-up;
578 drive-strength = <16>;
579 };
580
581 phy-intr-pins {
582 pins = "gpio124";
583 function = "emac_phy";
584 bias-disable;
585 drive-strength = <8>;
586 };
587
588 pps-pins {
589 pins = "gpio81";
590 function = "emac_pps";
591 bias-disable;
592 drive-strength = <8>;
593 };
594
595 phy-reset-pins {
596 pins = "gpio79";
597 function = "gpio";
598 bias-pull-up;
599 drive-strength = <16>;
600 };
601 };
602 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.