1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2021, Linaro Limited 3 * Copyright (c) 2021, Linaro Limited
4 */ 4 */
5 5
6 /dts-v1/; 6 /dts-v1/;
7 7
8 #include <dt-bindings/regulator/qcom,rpmh-regu 8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/gpio/gpio.h>
10 #include "sa8155p.dtsi" !! 10 #include "sm8150.dtsi"
11 #include "pmm8155au_1.dtsi" 11 #include "pmm8155au_1.dtsi"
12 #include "pmm8155au_2.dtsi" 12 #include "pmm8155au_2.dtsi"
13 13
14 / { 14 / {
15 model = "Qualcomm Technologies, Inc. S 15 model = "Qualcomm Technologies, Inc. SA8155P ADP";
16 compatible = "qcom,sa8155p-adp", "qcom 16 compatible = "qcom,sa8155p-adp", "qcom,sa8155p";
17 17
18 aliases { 18 aliases {
19 serial0 = &uart2; 19 serial0 = &uart2;
20 serial1 = &uart9; <<
21 }; 20 };
22 21
23 chosen { 22 chosen {
24 stdout-path = "serial0:115200n 23 stdout-path = "serial0:115200n8";
25 }; 24 };
26 25
27 vreg_3p3: vreg-3p3-regulator { !! 26 vreg_3p3: vreg_3p3_regulator {
28 compatible = "regulator-fixed" 27 compatible = "regulator-fixed";
29 regulator-name = "vreg_3p3"; 28 regulator-name = "vreg_3p3";
30 regulator-min-microvolt = <330 29 regulator-min-microvolt = <3300000>;
31 regulator-max-microvolt = <330 30 regulator-max-microvolt = <3300000>;
32 }; 31 };
33 32
34 /* 33 /*
35 * S4A is always on and not controllab 34 * S4A is always on and not controllable through RPMh.
36 * So model it as a fixed regulator. 35 * So model it as a fixed regulator.
37 */ 36 */
38 vreg_s4a_1p8: smps4 { 37 vreg_s4a_1p8: smps4 {
39 compatible = "regulator-fixed" 38 compatible = "regulator-fixed";
40 regulator-name = "vreg_s4a_1p8 39 regulator-name = "vreg_s4a_1p8";
41 40
42 regulator-min-microvolt = <180 41 regulator-min-microvolt = <1800000>;
43 regulator-max-microvolt = <180 42 regulator-max-microvolt = <1800000>;
44 43
45 regulator-always-on; 44 regulator-always-on;
46 regulator-boot-on; 45 regulator-boot-on;
>> 46 regulator-allow-set-load;
47 47
48 vin-supply = <&vreg_3p3>; 48 vin-supply = <&vreg_3p3>;
49 }; 49 };
50 }; 50 };
51 51
52 &apps_rsc { 52 &apps_rsc {
53 regulators-0 { !! 53 pmm8155au-1-rpmh-regulators {
54 compatible = "qcom,pmm8155au-r 54 compatible = "qcom,pmm8155au-rpmh-regulators";
55 qcom,pmic-id = "a"; 55 qcom,pmic-id = "a";
56 56
57 vdd-s1-supply = <&vreg_3p3>; 57 vdd-s1-supply = <&vreg_3p3>;
58 vdd-s2-supply = <&vreg_3p3>; 58 vdd-s2-supply = <&vreg_3p3>;
59 vdd-s3-supply = <&vreg_3p3>; 59 vdd-s3-supply = <&vreg_3p3>;
60 vdd-s4-supply = <&vreg_3p3>; 60 vdd-s4-supply = <&vreg_3p3>;
61 vdd-s5-supply = <&vreg_3p3>; 61 vdd-s5-supply = <&vreg_3p3>;
62 vdd-s6-supply = <&vreg_3p3>; 62 vdd-s6-supply = <&vreg_3p3>;
63 vdd-s7-supply = <&vreg_3p3>; 63 vdd-s7-supply = <&vreg_3p3>;
64 vdd-s8-supply = <&vreg_3p3>; 64 vdd-s8-supply = <&vreg_3p3>;
65 vdd-s9-supply = <&vreg_3p3>; 65 vdd-s9-supply = <&vreg_3p3>;
66 vdd-s10-supply = <&vreg_3p3>; 66 vdd-s10-supply = <&vreg_3p3>;
67 67
68 vdd-l1-l8-l11-supply = <&vreg_ 68 vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>;
69 vdd-l2-l10-supply = <&vreg_3p3 69 vdd-l2-l10-supply = <&vreg_3p3>;
70 vdd-l3-l4-l5-l18-supply = <&vr 70 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>;
71 vdd-l6-l9-supply = <&vreg_s6a_ 71 vdd-l6-l9-supply = <&vreg_s6a_0p92>;
72 vdd-l7-l12-l14-l15-supply = <& 72 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
73 vdd-l13-l16-l17-supply = <&vre 73 vdd-l13-l16-l17-supply = <&vreg_3p3>;
74 74
75 vreg_s5a_2p04: smps5 { 75 vreg_s5a_2p04: smps5 {
76 regulator-name = "vreg 76 regulator-name = "vreg_s5a_2p04";
77 regulator-min-microvol 77 regulator-min-microvolt = <1904000>;
78 regulator-max-microvol 78 regulator-max-microvolt = <2000000>;
79 }; 79 };
80 80
81 vreg_s6a_0p92: smps6 { 81 vreg_s6a_0p92: smps6 {
82 regulator-name = "vreg 82 regulator-name = "vreg_s6a_0p92";
83 regulator-min-microvol 83 regulator-min-microvolt = <920000>;
84 regulator-max-microvol 84 regulator-max-microvolt = <1128000>;
85 }; 85 };
86 86
87 vreg_l1a_0p752: ldo1 { 87 vreg_l1a_0p752: ldo1 {
88 regulator-name = "vreg 88 regulator-name = "vreg_l1a_0p752";
89 regulator-min-microvol 89 regulator-min-microvolt = <752000>;
90 regulator-max-microvol 90 regulator-max-microvolt = <752000>;
91 regulator-initial-mode 91 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
92 }; 92 };
93 93
94 vdda_usb_hs_3p1: 94 vdda_usb_hs_3p1:
95 vreg_l2a_3p072: ldo2 { 95 vreg_l2a_3p072: ldo2 {
96 regulator-name = "vreg 96 regulator-name = "vreg_l2a_3p072";
97 regulator-min-microvol 97 regulator-min-microvolt = <3072000>;
98 regulator-max-microvol 98 regulator-max-microvolt = <3072000>;
99 regulator-initial-mode 99 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
100 }; 100 };
101 101
102 vreg_l3a_0p8: ldo3 { 102 vreg_l3a_0p8: ldo3 {
103 regulator-name = "vreg 103 regulator-name = "vreg_l3a_0p8";
104 regulator-min-microvol 104 regulator-min-microvolt = <800000>;
105 regulator-max-microvol 105 regulator-max-microvolt = <800000>;
106 regulator-initial-mode 106 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
107 }; 107 };
108 108
109 vdd_usb_hs_core: 109 vdd_usb_hs_core:
110 vdda_usb_ss_dp_core_1: 110 vdda_usb_ss_dp_core_1:
111 vreg_l5a_0p88: ldo5 { 111 vreg_l5a_0p88: ldo5 {
112 regulator-name = "vreg 112 regulator-name = "vreg_l5a_0p88";
113 regulator-min-microvol 113 regulator-min-microvolt = <880000>;
114 regulator-max-microvol 114 regulator-max-microvolt = <880000>;
115 regulator-initial-mode 115 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
116 regulator-allow-set-lo 116 regulator-allow-set-load;
117 regulator-allowed-mode <<
118 <<
119 }; 117 };
120 118
121 vreg_l7a_1p8: ldo7 { 119 vreg_l7a_1p8: ldo7 {
122 regulator-name = "vreg 120 regulator-name = "vreg_l7a_1p8";
123 regulator-min-microvol 121 regulator-min-microvolt = <1800000>;
124 regulator-max-microvol 122 regulator-max-microvolt = <1800000>;
125 regulator-initial-mode 123 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
126 }; 124 };
127 125
128 vreg_l10a_2p96: ldo10 { 126 vreg_l10a_2p96: ldo10 {
129 regulator-name = "vreg 127 regulator-name = "vreg_l10a_2p96";
130 regulator-min-microvol 128 regulator-min-microvolt = <2504000>;
131 regulator-max-microvol 129 regulator-max-microvolt = <2960000>;
132 regulator-initial-mode 130 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
133 regulator-allow-set-lo 131 regulator-allow-set-load;
134 regulator-allowed-mode <<
135 <<
136 }; 132 };
137 133
138 vreg_l11a_0p8: ldo11 { 134 vreg_l11a_0p8: ldo11 {
139 regulator-name = "vreg 135 regulator-name = "vreg_l11a_0p8";
140 regulator-min-microvol 136 regulator-min-microvolt = <800000>;
141 regulator-max-microvol 137 regulator-max-microvolt = <800000>;
142 regulator-initial-mode 138 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
143 }; 139 };
144 140
145 vdda_usb_hs_1p8: 141 vdda_usb_hs_1p8:
146 vreg_l12a_1p8: ldo12 { 142 vreg_l12a_1p8: ldo12 {
147 regulator-name = "vreg 143 regulator-name = "vreg_l12a_1p8";
148 regulator-min-microvol 144 regulator-min-microvolt = <1800000>;
149 regulator-max-microvol 145 regulator-max-microvolt = <1800000>;
150 regulator-initial-mode 146 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
151 }; 147 };
152 148
153 vreg_l13a_2p7: ldo13 { 149 vreg_l13a_2p7: ldo13 {
154 regulator-name = "vreg 150 regulator-name = "vreg_l13a_2p7";
155 regulator-min-microvol 151 regulator-min-microvolt = <2704000>;
156 regulator-max-microvol 152 regulator-max-microvolt = <2704000>;
157 regulator-initial-mode 153 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
158 }; 154 };
159 155
160 vreg_l15a_1p7: ldo15 { 156 vreg_l15a_1p7: ldo15 {
161 regulator-name = "vreg 157 regulator-name = "vreg_l15a_1p7";
162 regulator-min-microvol 158 regulator-min-microvolt = <1704000>;
163 regulator-max-microvol 159 regulator-max-microvolt = <1704000>;
164 regulator-initial-mode 160 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
165 }; 161 };
166 162
167 vreg_l16a_2p7: ldo16 { 163 vreg_l16a_2p7: ldo16 {
168 regulator-name = "vreg 164 regulator-name = "vreg_l16a_2p7";
169 regulator-min-microvol 165 regulator-min-microvolt = <2704000>;
170 regulator-max-microvol 166 regulator-max-microvolt = <2960000>;
171 regulator-initial-mode 167 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
172 }; 168 };
173 169
174 vreg_l17a_2p96: ldo17 { 170 vreg_l17a_2p96: ldo17 {
175 regulator-name = "vreg 171 regulator-name = "vreg_l17a_2p96";
176 regulator-min-microvol 172 regulator-min-microvolt = <2504000>;
177 regulator-max-microvol 173 regulator-max-microvolt = <2960000>;
178 regulator-initial-mode 174 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
179 }; 175 };
180 }; 176 };
181 177
182 regulators-1 { !! 178 pmm8155au-2-rpmh-regulators {
183 compatible = "qcom,pmm8155au-r 179 compatible = "qcom,pmm8155au-rpmh-regulators";
184 qcom,pmic-id = "c"; 180 qcom,pmic-id = "c";
185 181
186 vdd-s1-supply = <&vreg_3p3>; 182 vdd-s1-supply = <&vreg_3p3>;
187 vdd-s2-supply = <&vreg_3p3>; 183 vdd-s2-supply = <&vreg_3p3>;
188 vdd-s3-supply = <&vreg_3p3>; 184 vdd-s3-supply = <&vreg_3p3>;
189 vdd-s4-supply = <&vreg_3p3>; 185 vdd-s4-supply = <&vreg_3p3>;
190 vdd-s5-supply = <&vreg_3p3>; 186 vdd-s5-supply = <&vreg_3p3>;
191 vdd-s6-supply = <&vreg_3p3>; 187 vdd-s6-supply = <&vreg_3p3>;
192 vdd-s7-supply = <&vreg_3p3>; 188 vdd-s7-supply = <&vreg_3p3>;
193 vdd-s8-supply = <&vreg_3p3>; 189 vdd-s8-supply = <&vreg_3p3>;
194 vdd-s9-supply = <&vreg_3p3>; 190 vdd-s9-supply = <&vreg_3p3>;
195 vdd-s10-supply = <&vreg_3p3>; 191 vdd-s10-supply = <&vreg_3p3>;
196 192
197 vdd-l1-l8-l11-supply = <&vreg_ 193 vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>;
198 vdd-l2-l10-supply = <&vreg_3p3 194 vdd-l2-l10-supply = <&vreg_3p3>;
199 vdd-l3-l4-l5-l18-supply = <&vr 195 vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>;
200 vdd-l6-l9-supply = <&vreg_s6c_ 196 vdd-l6-l9-supply = <&vreg_s6c_1p128>;
201 vdd-l7-l12-l14-l15-supply = <& 197 vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>;
202 vdd-l13-l16-l17-supply = <&vre 198 vdd-l13-l16-l17-supply = <&vreg_3p3>;
203 199
204 vreg_s4c_1p352: smps4 { 200 vreg_s4c_1p352: smps4 {
205 regulator-name = "vreg 201 regulator-name = "vreg_s4c_1p352";
206 regulator-min-microvol 202 regulator-min-microvolt = <1352000>;
207 regulator-max-microvol 203 regulator-max-microvolt = <1352000>;
208 }; 204 };
209 205
210 vreg_s5c_2p04: smps5 { 206 vreg_s5c_2p04: smps5 {
211 regulator-name = "vreg 207 regulator-name = "vreg_s5c_2p04";
212 regulator-min-microvol 208 regulator-min-microvolt = <1904000>;
213 regulator-max-microvol 209 regulator-max-microvolt = <2000000>;
214 }; 210 };
215 211
216 vreg_s6c_1p128: smps6 { 212 vreg_s6c_1p128: smps6 {
217 regulator-name = "vreg 213 regulator-name = "vreg_s6c_1p128";
218 regulator-min-microvol 214 regulator-min-microvolt = <1128000>;
219 regulator-max-microvol 215 regulator-max-microvolt = <1128000>;
220 }; 216 };
221 217
222 vreg_l1c_1p304: ldo1 { 218 vreg_l1c_1p304: ldo1 {
223 regulator-name = "vreg 219 regulator-name = "vreg_l1c_1p304";
224 regulator-min-microvol 220 regulator-min-microvolt = <1304000>;
225 regulator-max-microvol 221 regulator-max-microvolt = <1304000>;
226 regulator-initial-mode 222 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
227 }; 223 };
228 224
229 vreg_l2c_1p808: ldo2 { 225 vreg_l2c_1p808: ldo2 {
230 regulator-name = "vreg 226 regulator-name = "vreg_l2c_1p808";
231 regulator-min-microvol 227 regulator-min-microvolt = <1704000>;
232 regulator-max-microvol 228 regulator-max-microvolt = <2928000>;
233 regulator-initial-mode 229 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
234 }; 230 };
235 231
236 vreg_l5c_1p2: ldo5 { 232 vreg_l5c_1p2: ldo5 {
237 regulator-name = "vreg 233 regulator-name = "vreg_l5c_1p2";
238 regulator-min-microvol 234 regulator-min-microvolt = <1200000>;
239 regulator-max-microvol 235 regulator-max-microvolt = <1200000>;
240 regulator-initial-mode 236 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
241 regulator-allow-set-lo 237 regulator-allow-set-load;
242 regulator-allowed-mode <<
243 <<
244 }; 238 };
245 239
246 vreg_l7c_1p8: ldo7 { 240 vreg_l7c_1p8: ldo7 {
247 regulator-name = "vreg 241 regulator-name = "vreg_l7c_1p8";
248 regulator-min-microvol 242 regulator-min-microvolt = <1800000>;
249 regulator-max-microvol 243 regulator-max-microvolt = <1800000>;
250 regulator-initial-mode 244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
251 }; 245 };
252 246
253 vreg_l8c_1p2: ldo8 { 247 vreg_l8c_1p2: ldo8 {
254 regulator-name = "vreg 248 regulator-name = "vreg_l8c_1p2";
255 regulator-min-microvol 249 regulator-min-microvolt = <1200000>;
256 regulator-max-microvol 250 regulator-max-microvolt = <1200000>;
257 regulator-initial-mode 251 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
258 regulator-allow-set-lo 252 regulator-allow-set-load;
259 regulator-allowed-mode <<
260 <<
261 }; 253 };
262 254
263 vreg_l10c_3p3: ldo10 { 255 vreg_l10c_3p3: ldo10 {
264 regulator-name = "vreg 256 regulator-name = "vreg_l10c_3p3";
265 regulator-min-microvol 257 regulator-min-microvolt = <3000000>;
266 regulator-max-microvol 258 regulator-max-microvolt = <3312000>;
267 regulator-initial-mode 259 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
268 }; 260 };
269 261
270 vreg_l11c_0p8: ldo11 { 262 vreg_l11c_0p8: ldo11 {
271 regulator-name = "vreg 263 regulator-name = "vreg_l11c_0p8";
272 regulator-min-microvol 264 regulator-min-microvolt = <800000>;
273 regulator-max-microvol 265 regulator-max-microvolt = <800000>;
274 regulator-initial-mode 266 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
275 }; 267 };
276 268
277 vreg_l12c_1p808: ldo12 { 269 vreg_l12c_1p808: ldo12 {
278 regulator-name = "vreg 270 regulator-name = "vreg_l12c_1p808";
279 regulator-min-microvol 271 regulator-min-microvolt = <1704000>;
280 regulator-max-microvol 272 regulator-max-microvolt = <2928000>;
281 regulator-initial-mode 273 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
282 }; 274 };
283 275
284 vreg_l13c_2p96: ldo13 { 276 vreg_l13c_2p96: ldo13 {
285 regulator-name = "vreg 277 regulator-name = "vreg_l13c_2p96";
286 regulator-min-microvol !! 278 regulator-min-microvolt = <2504000>;
287 regulator-max-microvol 279 regulator-max-microvolt = <2960000>;
288 regulator-initial-mode 280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
289 }; 281 };
290 282
291 vreg_l15c_1p9: ldo15 { 283 vreg_l15c_1p9: ldo15 {
292 regulator-name = "vreg 284 regulator-name = "vreg_l15c_1p9";
293 regulator-min-microvol 285 regulator-min-microvolt = <1704000>;
294 regulator-max-microvol 286 regulator-max-microvolt = <2928000>;
295 regulator-initial-mode 287 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
296 }; 288 };
297 289
298 vreg_l16c_3p008: ldo16 { 290 vreg_l16c_3p008: ldo16 {
299 regulator-name = "vreg 291 regulator-name = "vreg_l16c_3p008";
300 regulator-min-microvol 292 regulator-min-microvolt = <3008000>;
301 regulator-max-microvol 293 regulator-max-microvolt = <3008000>;
302 regulator-initial-mode 294 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
303 }; 295 };
304 296
305 vreg_l18c_0p88: ldo18 { 297 vreg_l18c_0p88: ldo18 {
306 regulator-name = "vreg 298 regulator-name = "vreg_l18c_0p88";
307 regulator-min-microvol 299 regulator-min-microvolt = <880000>;
308 regulator-max-microvol 300 regulator-max-microvolt = <880000>;
309 regulator-initial-mode 301 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
310 }; 302 };
311 }; 303 };
312 }; 304 };
313 305
314 ðernet { <<
315 status = "okay"; <<
316 <<
317 snps,reset-gpio = <&tlmm 79 GPIO_ACTIV <<
318 snps,reset-active-low; <<
319 snps,reset-delays-us = <0 11000 70000> <<
320 <<
321 snps,mtl-rx-config = <&mtl_rx_setup>; <<
322 snps,mtl-tx-config = <&mtl_tx_setup>; <<
323 <<
324 pinctrl-names = "default"; <<
325 pinctrl-0 = <ðernet_defaults>; <<
326 <<
327 phy-handle = <&rgmii_phy>; <<
328 phy-mode = "rgmii"; <<
329 max-speed = <1000>; <<
330 <<
331 mdio { <<
332 compatible = "snps,dwmac-mdio" <<
333 #address-cells = <1>; <<
334 #size-cells = <0>; <<
335 <<
336 /* Micrel KSZ9031RNZ PHY */ <<
337 rgmii_phy: phy@7 { <<
338 compatible = "ethernet <<
339 reg = <0x7>; <<
340 <<
341 interrupts-extended = <<
342 device_type = "etherne <<
343 }; <<
344 }; <<
345 <<
346 mtl_rx_setup: rx-queues-config { <<
347 snps,rx-queues-to-use = <1>; <<
348 snps,rx-sched-sp; <<
349 <<
350 queue0 { <<
351 snps,dcb-algorithm; <<
352 snps,map-to-dma-channe <<
353 snps,route-up; <<
354 snps,priority = <0x1>; <<
355 }; <<
356 }; <<
357 <<
358 mtl_tx_setup: tx-queues-config { <<
359 snps,tx-queues-to-use = <1>; <<
360 snps,tx-sched-wrr; <<
361 <<
362 queue0 { <<
363 snps,weight = <0x10>; <<
364 snps,dcb-algorithm; <<
365 snps,priority = <0x0>; <<
366 }; <<
367 }; <<
368 }; <<
369 <<
370 &pmm8155au_1_gpios { <<
371 pmm8155au_1_sdc2_cd: sdc2-cd-default-s <<
372 pins = "gpio4"; <<
373 function = "normal"; <<
374 input-enable; <<
375 bias-pull-up; <<
376 power-source = <0>; <<
377 }; <<
378 }; <<
379 <<
380 &qupv3_id_1 { 306 &qupv3_id_1 {
381 status = "okay"; 307 status = "okay";
382 }; 308 };
383 309
384 &remoteproc_adsp { 310 &remoteproc_adsp {
385 status = "okay"; 311 status = "okay";
386 firmware-name = "qcom/sa8155p/adsp.mdt 312 firmware-name = "qcom/sa8155p/adsp.mdt";
387 }; 313 };
388 314
389 &remoteproc_cdsp { 315 &remoteproc_cdsp {
390 status = "okay"; 316 status = "okay";
391 firmware-name = "qcom/sa8155p/cdsp.mdt 317 firmware-name = "qcom/sa8155p/cdsp.mdt";
392 }; 318 };
393 319
394 &sdhc_2 { <<
395 status = "okay"; <<
396 <<
397 cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ <<
398 pinctrl-names = "default", "sleep"; <<
399 pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc <<
400 pinctrl-1 = <&sdc2_off &pmm8155au_1_sd <<
401 vqmmc-supply = <&vreg_l13c_2p96>; /* I <<
402 vmmc-supply = <&vreg_l17a_2p96>; /* C <<
403 bus-width = <4>; <<
404 no-sdio; <<
405 no-mmc; <<
406 }; <<
407 <<
408 &uart2 { 320 &uart2 {
409 status = "okay"; 321 status = "okay";
410 }; 322 };
411 323
412 &uart9 { <<
413 status = "okay"; <<
414 }; <<
415 <<
416 &ufs_mem_hc { 324 &ufs_mem_hc {
417 status = "okay"; 325 status = "okay";
418 326
419 reset-gpios = <&tlmm 175 GPIO_ACTIVE_L 327 reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
420 328
421 vcc-supply = <&vreg_l10a_2p96>; 329 vcc-supply = <&vreg_l10a_2p96>;
422 vcc-max-microamp = <750000>; 330 vcc-max-microamp = <750000>;
423 vccq-supply = <&vreg_l5c_1p2>; 331 vccq-supply = <&vreg_l5c_1p2>;
424 vccq-max-microamp = <700000>; 332 vccq-max-microamp = <700000>;
425 vccq2-supply = <&vreg_s4a_1p8>; 333 vccq2-supply = <&vreg_s4a_1p8>;
426 vccq2-max-microamp = <750000>; 334 vccq2-max-microamp = <750000>;
427 }; 335 };
428 336
429 &ufs_mem_phy { 337 &ufs_mem_phy {
430 status = "okay"; 338 status = "okay";
431 339
432 vdda-phy-supply = <&vreg_l8c_1p2>; 340 vdda-phy-supply = <&vreg_l8c_1p2>;
433 vdda-pll-supply = <&vreg_l5a_0p88>; 341 vdda-pll-supply = <&vreg_l5a_0p88>;
434 }; 342 };
435 343
436 &usb_1 { 344 &usb_1 {
437 status = "okay"; 345 status = "okay";
438 }; 346 };
439 347
440 &usb_1_dwc3 { 348 &usb_1_dwc3 {
441 dr_mode = "host"; 349 dr_mode = "host";
442 350
443 pinctrl-names = "default"; 351 pinctrl-names = "default";
444 pinctrl-0 = <&usb2phy_ac_en1_default>; 352 pinctrl-0 = <&usb2phy_ac_en1_default>;
445 }; 353 };
446 354
447 &usb_1_hsphy { 355 &usb_1_hsphy {
448 status = "okay"; 356 status = "okay";
449 vdda-pll-supply = <&vdd_usb_hs_core>; 357 vdda-pll-supply = <&vdd_usb_hs_core>;
450 vdda33-supply = <&vdda_usb_hs_3p1>; 358 vdda33-supply = <&vdda_usb_hs_3p1>;
451 vdda18-supply = <&vdda_usb_hs_1p8>; 359 vdda18-supply = <&vdda_usb_hs_1p8>;
452 }; 360 };
453 361
454 &usb_1_qmpphy { 362 &usb_1_qmpphy {
455 status = "disabled"; 363 status = "disabled";
456 }; 364 };
457 365
458 &usb_2 { 366 &usb_2 {
459 status = "okay"; 367 status = "okay";
460 }; 368 };
461 369
462 &usb_2_dwc3 { 370 &usb_2_dwc3 {
463 dr_mode = "host"; 371 dr_mode = "host";
464 372
465 pinctrl-names = "default"; 373 pinctrl-names = "default";
466 pinctrl-0 = <&usb2phy_ac_en2_default>; 374 pinctrl-0 = <&usb2phy_ac_en2_default>;
467 }; 375 };
468 376
469 &usb_2_hsphy { 377 &usb_2_hsphy {
470 status = "okay"; 378 status = "okay";
471 vdda-pll-supply = <&vdd_usb_hs_core>; 379 vdda-pll-supply = <&vdd_usb_hs_core>;
472 vdda33-supply = <&vdda_usb_hs_3p1>; 380 vdda33-supply = <&vdda_usb_hs_3p1>;
473 vdda18-supply = <&vdda_usb_hs_1p8>; 381 vdda18-supply = <&vdda_usb_hs_1p8>;
474 }; 382 };
475 383
476 &usb_2_qmpphy { 384 &usb_2_qmpphy {
477 status = "okay"; 385 status = "okay";
478 vdda-phy-supply = <&vreg_l8c_1p2>; 386 vdda-phy-supply = <&vreg_l8c_1p2>;
479 vdda-pll-supply = <&vdda_usb_ss_dp_cor 387 vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
480 }; 388 };
481 389
482 &pcie0 { <<
483 status = "okay"; <<
484 }; <<
485 <<
486 &pcie0_phy { <<
487 status = "okay"; <<
488 vdda-phy-supply = <&vreg_l18c_0p88>; <<
489 vdda-pll-supply = <&vreg_l8c_1p2>; <<
490 }; <<
491 <<
492 &pcie1_phy { <<
493 vdda-phy-supply = <&vreg_l18c_0p88>; <<
494 vdda-pll-supply = <&vreg_l8c_1p2>; <<
495 }; <<
496 <<
497 &tlmm { 390 &tlmm {
498 gpio-reserved-ranges = <0 4>; 391 gpio-reserved-ranges = <0 4>;
499 392
500 sdc2_on: sdc2-on-state { !! 393 usb2phy_ac_en1_default: usb2phy_ac_en1_default {
501 clk-pins { !! 394 mux {
502 pins = "sdc2_clk"; !! 395 pins = "gpio113";
503 bias-disable; !! 396 function = "usb2phy_ac";
504 drive-strength = <16>; <<
505 }; <<
506 <<
507 cmd-pins { <<
508 pins = "sdc2_cmd"; <<
509 bias-pull-up; <<
510 drive-strength = <16>; <<
511 }; <<
512 <<
513 data-pins { <<
514 pins = "sdc2_data"; <<
515 bias-pull-up; <<
516 drive-strength = <16>; <<
517 }; <<
518 }; <<
519 <<
520 sdc2_off: sdc2-off-state { <<
521 clk-pins { <<
522 pins = "sdc2_clk"; <<
523 bias-disable; <<
524 drive-strength = <2>; <<
525 }; <<
526 <<
527 cmd-pins { <<
528 pins = "sdc2_cmd"; <<
529 bias-pull-up; <<
530 drive-strength = <2>; <<
531 }; <<
532 <<
533 data-pins { <<
534 pins = "sdc2_data"; <<
535 bias-pull-up; <<
536 drive-strength = <2>; <<
537 }; <<
538 }; <<
539 <<
540 usb2phy_ac_en1_default: usb2phy-ac-en1 <<
541 pins = "gpio113"; <<
542 function = "usb2phy_ac"; <<
543 bias-disable; <<
544 drive-strength = <2>; <<
545 }; <<
546 <<
547 usb2phy_ac_en2_default: usb2phy-ac-en2 <<
548 pins = "gpio123"; <<
549 function = "usb2phy_ac"; <<
550 bias-disable; <<
551 drive-strength = <2>; <<
552 }; <<
553 <<
554 ethernet_defaults: ethernet-defaults-s <<
555 mdc-pins { <<
556 pins = "gpio7"; <<
557 function = "rgmii"; <<
558 bias-pull-up; <<
559 }; <<
560 <<
561 mdio-pins { <<
562 pins = "gpio59"; <<
563 function = "rgmii"; <<
564 bias-pull-up; <<
565 }; <<
566 <<
567 rgmii-rx-pins { <<
568 pins = "gpio117", "gpi <<
569 function = "rgmii"; <<
570 bias-disable; 397 bias-disable;
571 drive-strength = <2>; 398 drive-strength = <2>;
572 }; 399 };
>> 400 };
573 401
574 rgmii-tx-pins { !! 402 usb2phy_ac_en2_default: usb2phy_ac_en2_default {
575 pins = "gpio122", "gpi !! 403 mux {
576 function = "rgmii"; !! 404 pins = "gpio123";
577 bias-pull-up; !! 405 function = "usb2phy_ac";
578 drive-strength = <16>; <<
579 }; <<
580 <<
581 phy-intr-pins { <<
582 pins = "gpio124"; <<
583 function = "emac_phy"; <<
584 bias-disable; <<
585 drive-strength = <8>; <<
586 }; <<
587 <<
588 pps-pins { <<
589 pins = "gpio81"; <<
590 function = "emac_pps"; <<
591 bias-disable; 406 bias-disable;
592 drive-strength = <8>; !! 407 drive-strength = <2>;
593 }; <<
594 <<
595 phy-reset-pins { <<
596 pins = "gpio79"; <<
597 function = "gpio"; <<
598 bias-pull-up; <<
599 drive-strength = <16>; <<
600 }; 408 };
601 }; 409 };
602 }; 410 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.