1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2021, The Linux Foundation. A 3 * Copyright (c) 2021, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2022, Linaro Limited 4 * Copyright (c) 2022, Linaro Limited
5 */ 5 */
6 6
7 /dts-v1/; 7 /dts-v1/;
8 8
9 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/regulator/qcom,rpmh-regu 10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
11 #include <dt-bindings/spmi/spmi.h> 11 #include <dt-bindings/spmi/spmi.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h <<
13 12
14 #include "sa8540p.dtsi" 13 #include "sa8540p.dtsi"
15 #include "sa8540p-pmics.dtsi" <<
16 14
17 / { 15 / {
18 model = "Qualcomm SA8295P ADP"; 16 model = "Qualcomm SA8295P ADP";
19 compatible = "qcom,sa8295p-adp", "qcom 17 compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
20 18
21 aliases { 19 aliases {
22 serial0 = &uart17; !! 20 serial0 = &qup2_uart17;
23 }; 21 };
24 22
25 chosen { 23 chosen {
26 stdout-path = "serial0:115200n 24 stdout-path = "serial0:115200n8";
27 }; 25 };
28 <<
29 dp2-connector { <<
30 compatible = "dp-connector"; <<
31 label = "DP2"; <<
32 type = "mini"; <<
33 <<
34 hpd-gpios = <&tlmm 20 GPIO_ACT <<
35 <<
36 port { <<
37 dp2_connector_in: endp <<
38 remote-endpoin <<
39 }; <<
40 }; <<
41 }; <<
42 <<
43 dp3-connector { <<
44 compatible = "dp-connector"; <<
45 label = "DP3"; <<
46 type = "mini"; <<
47 <<
48 hpd-gpios = <&tlmm 45 GPIO_ACT <<
49 <<
50 port { <<
51 dp3_connector_in: endp <<
52 remote-endpoin <<
53 }; <<
54 }; <<
55 }; <<
56 <<
57 edp0-connector { <<
58 compatible = "dp-connector"; <<
59 label = "EDP0"; <<
60 type = "mini"; <<
61 <<
62 hpd-gpios = <&tlmm 2 GPIO_ACTI <<
63 <<
64 port { <<
65 edp0_connector_in: end <<
66 remote-endpoin <<
67 }; <<
68 }; <<
69 }; <<
70 <<
71 edp1-connector { <<
72 compatible = "dp-connector"; <<
73 label = "EDP1"; <<
74 type = "mini"; <<
75 <<
76 hpd-gpios = <&tlmm 3 GPIO_ACTI <<
77 <<
78 port { <<
79 edp1_connector_in: end <<
80 remote-endpoin <<
81 }; <<
82 }; <<
83 }; <<
84 <<
85 edp2-connector { <<
86 compatible = "dp-connector"; <<
87 label = "EDP2"; <<
88 type = "mini"; <<
89 <<
90 hpd-gpios = <&tlmm 7 GPIO_ACTI <<
91 <<
92 port { <<
93 edp2_connector_in: end <<
94 remote-endpoin <<
95 }; <<
96 }; <<
97 }; <<
98 <<
99 edp3-connector { <<
100 compatible = "dp-connector"; <<
101 label = "EDP3"; <<
102 type = "mini"; <<
103 <<
104 hpd-gpios = <&tlmm 6 GPIO_ACTI <<
105 <<
106 port { <<
107 edp3_connector_in: end <<
108 remote-endpoin <<
109 }; <<
110 }; <<
111 }; <<
112 <<
113 regulator-usb2-vbus { <<
114 compatible = "regulator-fixed" <<
115 regulator-name = "USB2_VBUS"; <<
116 gpio = <&pmm8540c_gpios 9 GPIO <<
117 pinctrl-0 = <&usb2_en>; <<
118 pinctrl-names = "default"; <<
119 enable-active-high; <<
120 regulator-always-on; <<
121 }; <<
122 <<
123 regulator-usb3-vbus { <<
124 compatible = "regulator-fixed" <<
125 regulator-name = "USB3_VBUS"; <<
126 gpio = <&pmm8540e_gpios 5 GPIO <<
127 pinctrl-0 = <&usb3_en>; <<
128 pinctrl-names = "default"; <<
129 enable-active-high; <<
130 regulator-always-on; <<
131 }; <<
132 <<
133 regulator-usb4-vbus { <<
134 compatible = "regulator-fixed" <<
135 regulator-name = "USB4_VBUS"; <<
136 gpio = <&pmm8540g_gpios 5 GPIO <<
137 pinctrl-0 = <&usb4_en>; <<
138 pinctrl-names = "default"; <<
139 enable-active-high; <<
140 regulator-always-on; <<
141 }; <<
142 <<
143 regulator-usb5-vbus { <<
144 compatible = "regulator-fixed" <<
145 regulator-name = "USB5_VBUS"; <<
146 gpio = <&pmm8540g_gpios 9 GPIO <<
147 pinctrl-0 = <&usb5_en>; <<
148 pinctrl-names = "default"; <<
149 enable-active-high; <<
150 regulator-always-on; <<
151 }; <<
152 <<
153 reserved-memory { <<
154 gpu_mem: gpu-mem@8bf00000 { <<
155 reg = <0 0x8bf00000 0 <<
156 no-map; <<
157 }; <<
158 }; <<
159 }; 26 };
160 27
161 &apps_rsc { 28 &apps_rsc {
162 regulators-0 { !! 29 pmm8540-a-regulators {
163 compatible = "qcom,pm8150-rpmh 30 compatible = "qcom,pm8150-rpmh-regulators";
164 qcom,pmic-id = "a"; 31 qcom,pmic-id = "a";
165 32
166 vreg_l3a: ldo3 { 33 vreg_l3a: ldo3 {
167 regulator-name = "vreg 34 regulator-name = "vreg_l3a";
168 regulator-min-microvol 35 regulator-min-microvolt = <1200000>;
169 regulator-max-microvol 36 regulator-max-microvolt = <1208000>;
170 regulator-initial-mode 37 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
171 }; 38 };
172 39
173 vreg_l5a: ldo5 { 40 vreg_l5a: ldo5 {
174 regulator-name = "vreg 41 regulator-name = "vreg_l5a";
175 regulator-min-microvol 42 regulator-min-microvolt = <912000>;
176 regulator-max-microvol 43 regulator-max-microvolt = <912000>;
177 regulator-initial-mode 44 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
178 }; 45 };
179 46
180 vreg_l7a: ldo7 { 47 vreg_l7a: ldo7 {
181 regulator-name = "vreg 48 regulator-name = "vreg_l7a";
182 regulator-min-microvol 49 regulator-min-microvolt = <1800000>;
183 regulator-max-microvol 50 regulator-max-microvolt = <1800000>;
184 regulator-initial-mode 51 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
185 }; 52 };
186 53
187 vreg_l13a: ldo13 { 54 vreg_l13a: ldo13 {
188 regulator-name = "vreg 55 regulator-name = "vreg_l13a";
189 regulator-min-microvol 56 regulator-min-microvolt = <3072000>;
190 regulator-max-microvol 57 regulator-max-microvolt = <3072000>;
191 regulator-initial-mode 58 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
192 }; 59 };
193 <<
194 vreg_l11a: ldo11 { <<
195 regulator-name = "vreg <<
196 regulator-min-microvol <<
197 regulator-max-microvol <<
198 regulator-initial-mode <<
199 }; <<
200 }; 60 };
201 61
202 regulators-1 { !! 62 pmm8540-c-regulators {
203 compatible = "qcom,pm8150-rpmh 63 compatible = "qcom,pm8150-rpmh-regulators";
204 qcom,pmic-id = "c"; 64 qcom,pmic-id = "c";
205 65
206 vreg_l1c: ldo1 { 66 vreg_l1c: ldo1 {
207 regulator-name = "vreg 67 regulator-name = "vreg_l1c";
208 regulator-min-microvol 68 regulator-min-microvolt = <912000>;
209 regulator-max-microvol 69 regulator-max-microvolt = <912000>;
210 regulator-initial-mode 70 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
211 }; 71 };
212 72
213 vreg_l2c: ldo2 { 73 vreg_l2c: ldo2 {
214 regulator-name = "vreg 74 regulator-name = "vreg_l2c";
215 regulator-min-microvol 75 regulator-min-microvolt = <3072000>;
216 regulator-max-microvol 76 regulator-max-microvolt = <3072000>;
217 regulator-initial-mode 77 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218 }; 78 };
219 79
220 vreg_l3c: ldo3 { 80 vreg_l3c: ldo3 {
221 regulator-name = "vreg 81 regulator-name = "vreg_l3c";
222 regulator-min-microvol 82 regulator-min-microvolt = <1200000>;
223 regulator-max-microvol 83 regulator-max-microvolt = <1200000>;
224 regulator-initial-mode 84 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
225 regulator-allow-set-lo 85 regulator-allow-set-load;
226 regulator-allowed-mode !! 86 regulator-allowed-modes =
227 !! 87 <RPMH_REGULATOR_MODE_LPM
>> 88 RPMH_REGULATOR_MODE_HPM>;
228 }; 89 };
229 90
230 vreg_l4c: ldo4 { 91 vreg_l4c: ldo4 {
231 regulator-name = "vreg 92 regulator-name = "vreg_l4c";
232 regulator-min-microvol 93 regulator-min-microvolt = <1200000>;
233 regulator-max-microvol 94 regulator-max-microvolt = <1208000>;
234 regulator-initial-mode 95 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
235 }; 96 };
236 97
237 vreg_l6c: ldo6 { 98 vreg_l6c: ldo6 {
238 regulator-name = "vreg 99 regulator-name = "vreg_l6c";
239 regulator-min-microvol 100 regulator-min-microvolt = <1200000>;
240 regulator-max-microvol 101 regulator-max-microvolt = <1200000>;
241 regulator-initial-mode 102 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
242 regulator-allow-set-lo 103 regulator-allow-set-load;
243 regulator-allowed-mode !! 104 regulator-allowed-modes =
244 !! 105 <RPMH_REGULATOR_MODE_LPM
>> 106 RPMH_REGULATOR_MODE_HPM>;
245 }; 107 };
246 108
247 vreg_l7c: ldo7 { 109 vreg_l7c: ldo7 {
248 regulator-name = "vreg 110 regulator-name = "vreg_l7c";
249 regulator-min-microvol 111 regulator-min-microvolt = <1800000>;
250 regulator-max-microvol 112 regulator-max-microvolt = <1800000>;
251 regulator-initial-mode 113 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
252 }; 114 };
253 115
254 vreg_l10c: ldo10 { 116 vreg_l10c: ldo10 {
255 regulator-name = "vreg 117 regulator-name = "vreg_l10c";
256 regulator-min-microvol 118 regulator-min-microvolt = <2504000>;
257 regulator-max-microvol 119 regulator-max-microvolt = <2504000>;
258 regulator-initial-mode 120 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
259 regulator-allow-set-lo 121 regulator-allow-set-load;
260 regulator-allowed-mode !! 122 regulator-allowed-modes =
261 !! 123 <RPMH_REGULATOR_MODE_LPM
>> 124 RPMH_REGULATOR_MODE_HPM>;
262 }; 125 };
263 126
264 vreg_l17c: ldo17 { 127 vreg_l17c: ldo17 {
265 regulator-name = "vreg 128 regulator-name = "vreg_l17c";
266 regulator-min-microvol 129 regulator-min-microvolt = <2504000>;
267 regulator-max-microvol 130 regulator-max-microvolt = <2504000>;
268 regulator-initial-mode 131 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
269 regulator-allow-set-lo 132 regulator-allow-set-load;
270 regulator-allowed-mode !! 133 regulator-allowed-modes =
271 !! 134 <RPMH_REGULATOR_MODE_LPM
>> 135 RPMH_REGULATOR_MODE_HPM>;
272 }; 136 };
273 }; 137 };
274 138
275 regulators-2 { !! 139 pmm8540-g-regulators {
276 compatible = "qcom,pm8150-rpmh 140 compatible = "qcom,pm8150-rpmh-regulators";
277 qcom,pmic-id = "g"; 141 qcom,pmic-id = "g";
278 142
279 vreg_l3g: ldo3 { 143 vreg_l3g: ldo3 {
280 regulator-name = "vreg 144 regulator-name = "vreg_l3g";
281 regulator-min-microvol 145 regulator-min-microvolt = <1200000>;
282 regulator-max-microvol 146 regulator-max-microvolt = <1200000>;
283 regulator-initial-mode 147 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
284 }; 148 };
285 149
286 vreg_l7g: ldo7 { 150 vreg_l7g: ldo7 {
287 regulator-name = "vreg 151 regulator-name = "vreg_l7g";
288 regulator-min-microvol 152 regulator-min-microvolt = <1800000>;
289 regulator-max-microvol 153 regulator-max-microvolt = <1800000>;
290 regulator-initial-mode 154 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
291 }; 155 };
292 156
293 vreg_l8g: ldo8 { 157 vreg_l8g: ldo8 {
294 regulator-name = "vreg 158 regulator-name = "vreg_l8g";
295 regulator-min-microvol !! 159 regulator-min-microvolt = <880000>;
296 regulator-max-microvol !! 160 regulator-max-microvolt = <880000>;
297 regulator-initial-mode <<
298 }; <<
299 <<
300 vreg_l11g: ldo11 { <<
301 regulator-name = "vreg <<
302 regulator-min-microvol <<
303 regulator-max-microvol <<
304 regulator-initial-mode 161 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
305 }; 162 };
306 }; 163 };
307 }; 164 };
308 165
309 &dispcc0 { !! 166 &qup2 {
310 status = "okay"; <<
311 }; <<
312 <<
313 &dispcc1 { <<
314 status = "okay"; <<
315 }; <<
316 <<
317 &i2c12 { <<
318 pinctrl-0 = <&qup1_i2c4_state>; <<
319 pinctrl-names = "default"; <<
320 <<
321 status = "okay"; <<
322 <<
323 vdd_gfx: regulator@39 { <<
324 compatible = "maxim,max20411"; <<
325 reg = <0x39>; <<
326 <<
327 regulator-min-microvolt = <800 <<
328 regulator-max-microvolt = <800 <<
329 <<
330 enable-gpios = <&pmm8540a_gpio <<
331 <<
332 pinctrl-0 = <&max20411_en>; <<
333 pinctrl-names = "default"; <<
334 }; <<
335 }; <<
336 <<
337 &gpucc { <<
338 vdd-gfx-supply = <&vdd_gfx>; <<
339 status = "okay"; <<
340 }; <<
341 <<
342 &gmu { <<
343 status = "okay"; <<
344 }; <<
345 <<
346 &gpu { <<
347 status = "okay"; <<
348 <<
349 zap-shader { <<
350 memory-region = <&gpu_mem>; <<
351 firmware-name = "qcom/sa8295p/ <<
352 }; <<
353 }; <<
354 <<
355 &gpu_smmu { <<
356 status = "okay"; <<
357 }; <<
358 <<
359 &mdss0 { <<
360 status = "okay"; <<
361 }; <<
362 <<
363 &mdss0_dp2 { <<
364 data-lanes = <0 1 2 3>; <<
365 <<
366 status = "okay"; <<
367 <<
368 ports { <<
369 port@1 { <<
370 reg = <1>; <<
371 mdss0_dp2_phy_out: end <<
372 remote-endpoin <<
373 }; <<
374 }; <<
375 }; <<
376 }; <<
377 <<
378 &mdss0_dp2_phy { <<
379 vdda-phy-supply = <&vreg_l8g>; <<
380 vdda-pll-supply = <&vreg_l3g>; <<
381 <<
382 status = "okay"; <<
383 }; <<
384 <<
385 &mdss0_dp3 { <<
386 data-lanes = <0 1 2 3>; <<
387 <<
388 status = "okay"; <<
389 <<
390 ports { <<
391 port@1 { <<
392 reg = <1>; <<
393 mdss0_dp3_phy_out: end <<
394 remote-endpoin <<
395 }; <<
396 }; <<
397 }; <<
398 }; <<
399 <<
400 &mdss0_dp3_phy { <<
401 vdda-phy-supply = <&vreg_l8g>; <<
402 vdda-pll-supply = <&vreg_l3g>; <<
403 <<
404 status = "okay"; <<
405 }; <<
406 <<
407 &mdss1 { <<
408 status = "okay"; <<
409 }; <<
410 <<
411 &mdss1_dp0 { <<
412 data-lanes = <0 1 2 3>; <<
413 <<
414 status = "okay"; <<
415 <<
416 ports { <<
417 port@1 { <<
418 reg = <1>; <<
419 mdss1_dp0_phy_out: end <<
420 remote-endpoin <<
421 }; <<
422 }; <<
423 }; <<
424 }; <<
425 <<
426 &mdss1_dp0_phy { <<
427 vdda-phy-supply = <&vreg_l11g>; <<
428 vdda-pll-supply = <&vreg_l3g>; <<
429 <<
430 status = "okay"; <<
431 }; <<
432 <<
433 &mdss1_dp1 { <<
434 data-lanes = <0 1 2 3>; <<
435 <<
436 status = "okay"; <<
437 <<
438 ports { <<
439 port@1 { <<
440 reg = <1>; <<
441 mdss1_dp1_phy_out: end <<
442 remote-endpoin <<
443 }; <<
444 }; <<
445 }; <<
446 }; <<
447 <<
448 &mdss1_dp1_phy { <<
449 vdda-phy-supply = <&vreg_l11g>; <<
450 vdda-pll-supply = <&vreg_l3g>; <<
451 <<
452 status = "okay"; <<
453 }; <<
454 <<
455 &mdss1_dp2 { <<
456 data-lanes = <0 1 2 3>; <<
457 <<
458 status = "okay"; <<
459 <<
460 ports { <<
461 port@1 { <<
462 reg = <1>; <<
463 mdss1_dp2_phy_out: end <<
464 remote-endpoin <<
465 }; <<
466 }; <<
467 }; <<
468 }; <<
469 <<
470 &mdss1_dp2_phy { <<
471 vdda-phy-supply = <&vreg_l11g>; <<
472 vdda-pll-supply = <&vreg_l3g>; <<
473 <<
474 status = "okay"; <<
475 }; <<
476 <<
477 &mdss1_dp3 { <<
478 data-lanes = <0 1 2 3>; <<
479 <<
480 status = "okay"; <<
481 <<
482 ports { <<
483 port@1 { <<
484 reg = <1>; <<
485 mdss1_dp3_phy_out: end <<
486 remote-endpoin <<
487 }; <<
488 }; <<
489 }; <<
490 }; <<
491 <<
492 &mdss1_dp3_phy { <<
493 vdda-phy-supply = <&vreg_l11g>; <<
494 vdda-pll-supply = <&vreg_l3g>; <<
495 <<
496 status = "okay"; <<
497 }; <<
498 <<
499 &pcie2a { <<
500 perst-gpios = <&tlmm 143 GPIO_ACTIVE_L <<
501 wake-gpios = <&tlmm 145 GPIO_ACTIVE_LO <<
502 <<
503 pinctrl-names = "default"; <<
504 pinctrl-0 = <&pcie2a_default>; <<
505 <<
506 status = "okay"; <<
507 }; <<
508 <<
509 &pcie2a_phy { <<
510 vdda-phy-supply = <&vreg_l11a>; <<
511 vdda-pll-supply = <&vreg_l3a>; <<
512 <<
513 status = "okay"; <<
514 }; <<
515 <<
516 &pcie3a { <<
517 num-lanes = <2>; <<
518 <<
519 perst-gpios = <&tlmm 151 GPIO_ACTIVE_L <<
520 wake-gpios = <&tlmm 56 GPIO_ACTIVE_LOW <<
521 <<
522 pinctrl-names = "default"; <<
523 pinctrl-0 = <&pcie3a_default>; <<
524 <<
525 status = "okay"; <<
526 }; <<
527 <<
528 &pcie3a_phy { <<
529 vdda-phy-supply = <&vreg_l11a>; <<
530 vdda-pll-supply = <&vreg_l3a>; <<
531 <<
532 status = "okay"; <<
533 }; <<
534 <<
535 &pcie3b { <<
536 perst-gpios = <&tlmm 153 GPIO_ACTIVE_L <<
537 wake-gpios = <&tlmm 130 GPIO_ACTIVE_LO <<
538 <<
539 pinctrl-names = "default"; <<
540 pinctrl-0 = <&pcie3b_default>; <<
541 <<
542 status = "okay"; <<
543 }; <<
544 <<
545 &pcie3b_phy { <<
546 vdda-phy-supply = <&vreg_l11a>; <<
547 vdda-pll-supply = <&vreg_l3a>; <<
548 <<
549 status = "okay"; <<
550 }; <<
551 <<
552 &pcie4 { <<
553 perst-gpios = <&tlmm 141 GPIO_ACTIVE_L <<
554 wake-gpios = <&tlmm 139 GPIO_ACTIVE_LO <<
555 <<
556 pinctrl-names = "default"; <<
557 pinctrl-0 = <&pcie4_default>; <<
558 <<
559 status = "okay"; <<
560 }; <<
561 <<
562 &pcie4_phy { <<
563 vdda-phy-supply = <&vreg_l11a>; <<
564 vdda-pll-supply = <&vreg_l3a>; <<
565 <<
566 status = "okay"; <<
567 }; <<
568 <<
569 &qup1 { <<
570 status = "okay"; 167 status = "okay";
571 }; 168 };
572 169
573 &qup2 { !! 170 &qup2_uart17 {
>> 171 compatible = "qcom,geni-debug-uart";
574 status = "okay"; 172 status = "okay";
575 }; 173 };
576 174
577 &remoteproc_adsp { 175 &remoteproc_adsp {
578 firmware-name = "qcom/sa8540p/adsp.mbn 176 firmware-name = "qcom/sa8540p/adsp.mbn";
579 status = "okay"; 177 status = "okay";
580 }; 178 };
581 179
582 &remoteproc_nsp0 { 180 &remoteproc_nsp0 {
583 firmware-name = "qcom/sa8540p/cdsp.mbn 181 firmware-name = "qcom/sa8540p/cdsp.mbn";
584 status = "okay"; 182 status = "okay";
585 }; 183 };
586 184
587 &remoteproc_nsp1 { 185 &remoteproc_nsp1 {
588 firmware-name = "qcom/sa8540p/cdsp1.mb 186 firmware-name = "qcom/sa8540p/cdsp1.mbn";
589 status = "okay"; 187 status = "okay";
590 }; 188 };
591 189
592 &uart17 { !! 190 &spmi_bus {
593 compatible = "qcom,geni-debug-uart"; !! 191 pm8450a: pmic@0 {
594 status = "okay"; !! 192 compatible = "qcom,pm8150", "qcom,spmi-pmic";
>> 193 reg = <0x0 SPMI_USID>;
>> 194 #address-cells = <1>;
>> 195 #size-cells = <0>;
>> 196
>> 197 pm8450a_gpios: gpio@c000 {
>> 198 compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>> 199 reg = <0xc000>;
>> 200 gpio-controller;
>> 201 gpio-ranges = <&pm8450a_gpios 0 0 10>;
>> 202 #gpio-cells = <2>;
>> 203 interrupt-controller;
>> 204 #interrupt-cells = <2>;
>> 205 };
>> 206 };
>> 207
>> 208 pm8450c: pmic@4 {
>> 209 compatible = "qcom,pm8150", "qcom,spmi-pmic";
>> 210 reg = <0x4 SPMI_USID>;
>> 211 #address-cells = <1>;
>> 212 #size-cells = <0>;
>> 213
>> 214 pm8450c_gpios: gpio@c000 {
>> 215 compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>> 216 reg = <0xc000>;
>> 217 gpio-controller;
>> 218 gpio-ranges = <&pm8450c_gpios 0 0 10>;
>> 219 #gpio-cells = <2>;
>> 220 interrupt-controller;
>> 221 #interrupt-cells = <2>;
>> 222 };
>> 223 };
>> 224
>> 225 pm8450e: pmic@8 {
>> 226 compatible = "qcom,pm8150", "qcom,spmi-pmic";
>> 227 reg = <0x8 SPMI_USID>;
>> 228 #address-cells = <1>;
>> 229 #size-cells = <0>;
>> 230
>> 231 pm8450e_gpios: gpio@c000 {
>> 232 compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>> 233 reg = <0xc000>;
>> 234 gpio-controller;
>> 235 gpio-ranges = <&pm8450e_gpios 0 0 10>;
>> 236 #gpio-cells = <2>;
>> 237 interrupt-controller;
>> 238 #interrupt-cells = <2>;
>> 239 };
>> 240 };
>> 241
>> 242 pm8450g: pmic@c {
>> 243 compatible = "qcom,pm8150", "qcom,spmi-pmic";
>> 244 reg = <0xc SPMI_USID>;
>> 245 #address-cells = <1>;
>> 246 #size-cells = <0>;
>> 247
>> 248 pm8450g_gpios: gpio@c000 {
>> 249 compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>> 250 reg = <0xc000>;
>> 251 gpio-controller;
>> 252 gpio-ranges = <&pm8450g_gpios 0 0 10>;
>> 253 #gpio-cells = <2>;
>> 254 interrupt-controller;
>> 255 #interrupt-cells = <2>;
>> 256 };
>> 257 };
595 }; 258 };
596 259
597 &ufs_mem_hc { 260 &ufs_mem_hc {
598 reset-gpios = <&tlmm 228 GPIO_ACTIVE_L 261 reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
599 262
600 vcc-supply = <&vreg_l17c>; 263 vcc-supply = <&vreg_l17c>;
601 vcc-max-microamp = <800000>; 264 vcc-max-microamp = <800000>;
602 vccq-supply = <&vreg_l6c>; 265 vccq-supply = <&vreg_l6c>;
603 vccq-max-microamp = <900000>; 266 vccq-max-microamp = <900000>;
604 267
605 status = "okay"; 268 status = "okay";
606 }; 269 };
607 270
608 &ufs_mem_phy { 271 &ufs_mem_phy {
609 vdda-phy-supply = <&vreg_l8g>; 272 vdda-phy-supply = <&vreg_l8g>;
610 vdda-pll-supply = <&vreg_l3g>; 273 vdda-pll-supply = <&vreg_l3g>;
611 274
612 status = "okay"; 275 status = "okay";
613 }; 276 };
614 277
615 &ufs_card_hc { 278 &ufs_card_hc {
616 reset-gpios = <&tlmm 229 GPIO_ACTIVE_L 279 reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
617 280
618 vcc-supply = <&vreg_l10c>; 281 vcc-supply = <&vreg_l10c>;
619 vcc-max-microamp = <800000>; 282 vcc-max-microamp = <800000>;
620 vccq-supply = <&vreg_l3c>; 283 vccq-supply = <&vreg_l3c>;
621 vccq-max-microamp = <900000>; 284 vccq-max-microamp = <900000>;
622 285
623 status = "okay"; 286 status = "okay";
624 }; 287 };
625 288
626 &ufs_card_phy { 289 &ufs_card_phy {
627 vdda-phy-supply = <&vreg_l8g>; 290 vdda-phy-supply = <&vreg_l8g>;
628 vdda-pll-supply = <&vreg_l3g>; 291 vdda-pll-supply = <&vreg_l3g>;
629 292
630 status = "okay"; 293 status = "okay";
631 }; 294 };
632 295
633 &usb_0 { 296 &usb_0 {
634 status = "okay"; 297 status = "okay";
635 }; 298 };
636 299
637 &usb_0_dwc3 { 300 &usb_0_dwc3 {
638 /* TODO: Define USB-C connector proper 301 /* TODO: Define USB-C connector properly */
639 dr_mode = "peripheral"; 302 dr_mode = "peripheral";
640 }; 303 };
641 304
642 &usb_0_hsphy { 305 &usb_0_hsphy {
643 vdda-pll-supply = <&vreg_l5a>; 306 vdda-pll-supply = <&vreg_l5a>;
644 vdda18-supply = <&vreg_l7a>; 307 vdda18-supply = <&vreg_l7a>;
645 vdda33-supply = <&vreg_l13a>; 308 vdda33-supply = <&vreg_l13a>;
646 309
647 status = "okay"; 310 status = "okay";
648 }; 311 };
649 312
650 &usb_0_qmpphy { 313 &usb_0_qmpphy {
651 vdda-phy-supply = <&vreg_l3a>; 314 vdda-phy-supply = <&vreg_l3a>;
652 vdda-pll-supply = <&vreg_l5a>; 315 vdda-pll-supply = <&vreg_l5a>;
653 316
654 status = "okay"; 317 status = "okay";
655 }; 318 };
656 319
657 &usb_1 { 320 &usb_1 {
658 status = "okay"; 321 status = "okay";
659 }; 322 };
660 323
661 &usb_1_dwc3 { 324 &usb_1_dwc3 {
662 /* TODO: Define USB-C connector proper 325 /* TODO: Define USB-C connector properly */
663 dr_mode = "host"; 326 dr_mode = "host";
664 }; 327 };
665 328
666 &usb_1_hsphy { 329 &usb_1_hsphy {
667 vdda-pll-supply = <&vreg_l1c>; 330 vdda-pll-supply = <&vreg_l1c>;
668 vdda18-supply = <&vreg_l7c>; 331 vdda18-supply = <&vreg_l7c>;
669 vdda33-supply = <&vreg_l2c>; 332 vdda33-supply = <&vreg_l2c>;
670 333
671 status = "okay"; 334 status = "okay";
672 }; 335 };
673 336
674 &usb_1_qmpphy { 337 &usb_1_qmpphy {
675 vdda-phy-supply = <&vreg_l4c>; 338 vdda-phy-supply = <&vreg_l4c>;
676 vdda-pll-supply = <&vreg_l1c>; 339 vdda-pll-supply = <&vreg_l1c>;
677 340
678 status = "okay"; 341 status = "okay";
679 }; 342 };
680 343
681 &usb_2 { <<
682 status = "okay"; <<
683 }; <<
684 <<
685 &usb_2_hsphy0 { 344 &usb_2_hsphy0 {
686 vdda-pll-supply = <&vreg_l5a>; 345 vdda-pll-supply = <&vreg_l5a>;
687 vdda18-supply = <&vreg_l7g>; 346 vdda18-supply = <&vreg_l7g>;
688 vdda33-supply = <&vreg_l13a>; 347 vdda33-supply = <&vreg_l13a>;
689 348
690 status = "okay"; 349 status = "okay";
691 }; 350 };
692 351
693 &usb_2_hsphy1 { 352 &usb_2_hsphy1 {
694 vdda-pll-supply = <&vreg_l5a>; 353 vdda-pll-supply = <&vreg_l5a>;
695 vdda18-supply = <&vreg_l7g>; 354 vdda18-supply = <&vreg_l7g>;
696 vdda33-supply = <&vreg_l13a>; 355 vdda33-supply = <&vreg_l13a>;
697 356
698 status = "okay"; 357 status = "okay";
699 }; 358 };
700 359
701 &usb_2_hsphy2 { 360 &usb_2_hsphy2 {
702 vdda-pll-supply = <&vreg_l5a>; 361 vdda-pll-supply = <&vreg_l5a>;
703 vdda18-supply = <&vreg_l7g>; 362 vdda18-supply = <&vreg_l7g>;
704 vdda33-supply = <&vreg_l13a>; 363 vdda33-supply = <&vreg_l13a>;
705 364
706 status = "okay"; 365 status = "okay";
707 }; 366 };
708 367
709 &usb_2_hsphy3 { 368 &usb_2_hsphy3 {
710 vdda-pll-supply = <&vreg_l5a>; 369 vdda-pll-supply = <&vreg_l5a>;
711 vdda18-supply = <&vreg_l7g>; 370 vdda18-supply = <&vreg_l7g>;
712 vdda33-supply = <&vreg_l13a>; 371 vdda33-supply = <&vreg_l13a>;
713 372
714 status = "okay"; 373 status = "okay";
715 }; 374 };
716 375
717 &usb_2_qmpphy0 { 376 &usb_2_qmpphy0 {
718 vdda-phy-supply = <&vreg_l3a>; 377 vdda-phy-supply = <&vreg_l3a>;
719 vdda-pll-supply = <&vreg_l5a>; 378 vdda-pll-supply = <&vreg_l5a>;
720 379
721 status = "okay"; 380 status = "okay";
722 }; 381 };
723 382
724 &usb_2_qmpphy1 { 383 &usb_2_qmpphy1 {
725 vdda-phy-supply = <&vreg_l3a>; 384 vdda-phy-supply = <&vreg_l3a>;
726 vdda-pll-supply = <&vreg_l5a>; 385 vdda-pll-supply = <&vreg_l5a>;
727 386
728 status = "okay"; 387 status = "okay";
729 }; 388 };
730 389
731 &xo_board_clk { 390 &xo_board_clk {
732 clock-frequency = <38400000>; 391 clock-frequency = <38400000>;
733 }; 392 };
734 393
735 /* PINCTRL */ 394 /* PINCTRL */
736 <<
737 &pmm8540a_gpios { <<
738 max20411_en: max20411-en-state { <<
739 pins = "gpio2"; <<
740 function = "normal"; <<
741 output-enable; <<
742 }; <<
743 }; <<
744 <<
745 &pmm8540c_gpios { <<
746 usb2_en: usb2-en-state { <<
747 pins = "gpio9"; <<
748 function = "normal"; <<
749 qcom,drive-strength = <PMIC_GP <<
750 output-enable; <<
751 power-source = <0>; <<
752 }; <<
753 }; <<
754 <<
755 &pmm8540e_gpios { <<
756 usb3_en: usb3-en-state { <<
757 pins = "gpio5"; <<
758 function = "normal"; <<
759 qcom,drive-strength = <PMIC_GP <<
760 output-enable; <<
761 power-source = <0>; <<
762 }; <<
763 }; <<
764 <<
765 &pmm8540g_gpios { <<
766 usb4_en: usb4-en-state { <<
767 pins = "gpio5"; <<
768 function = "normal"; <<
769 qcom,drive-strength = <PMIC_GP <<
770 output-enable; <<
771 power-source = <0>; <<
772 }; <<
773 <<
774 usb5_en: usb5-en-state { <<
775 pins = "gpio9"; <<
776 function = "normal"; <<
777 qcom,drive-strength = <PMIC_GP <<
778 output-enable; <<
779 power-source = <0>; <<
780 }; <<
781 }; <<
782 <<
783 &tlmm { <<
784 pcie2a_default: pcie2a-default-state { <<
785 clkreq-n-pins { <<
786 pins = "gpio142"; <<
787 function = "pcie2a_clk <<
788 drive-strength = <2>; <<
789 bias-pull-up; <<
790 }; <<
791 <<
792 perst-n-pins { <<
793 pins = "gpio143"; <<
794 function = "gpio"; <<
795 drive-strength = <2>; <<
796 bias-pull-down; <<
797 }; <<
798 <<
799 wake-n-pins { <<
800 pins = "gpio145"; <<
801 function = "gpio"; <<
802 drive-strength = <2>; <<
803 bias-pull-up; <<
804 }; <<
805 }; <<
806 <<
807 pcie3a_default: pcie3a-default-state { <<
808 clkreq-n-pins { <<
809 pins = "gpio150"; <<
810 function = "pcie3a_clk <<
811 drive-strength = <2>; <<
812 bias-pull-up; <<
813 }; <<
814 <<
815 perst-n-pins { <<
816 pins = "gpio151"; <<
817 function = "gpio"; <<
818 drive-strength = <2>; <<
819 bias-pull-down; <<
820 }; <<
821 <<
822 wake-n-pins { <<
823 pins = "gpio56"; <<
824 function = "gpio"; <<
825 drive-strength = <2>; <<
826 bias-pull-up; <<
827 }; <<
828 }; <<
829 <<
830 pcie3b_default: pcie3b-default-state { <<
831 clkreq-n-pins { <<
832 pins = "gpio152"; <<
833 function = "pcie3b_clk <<
834 drive-strength = <2>; <<
835 bias-pull-up; <<
836 }; <<
837 <<
838 perst-n-pins { <<
839 pins = "gpio153"; <<
840 function = "gpio"; <<
841 drive-strength = <2>; <<
842 bias-pull-down; <<
843 }; <<
844 <<
845 wake-n-pins { <<
846 pins = "gpio130"; <<
847 function = "gpio"; <<
848 drive-strength = <2>; <<
849 bias-pull-up; <<
850 }; <<
851 }; <<
852 <<
853 pcie4_default: pcie4-default-state { <<
854 clkreq-n-pins { <<
855 pins = "gpio140"; <<
856 function = "pcie4_clkr <<
857 drive-strength = <2>; <<
858 bias-pull-up; <<
859 }; <<
860 <<
861 perst-n-pins { <<
862 pins = "gpio141"; <<
863 function = "gpio"; <<
864 drive-strength = <2>; <<
865 bias-pull-down; <<
866 }; <<
867 <<
868 wake-n-pins { <<
869 pins = "gpio139"; <<
870 function = "gpio"; <<
871 drive-strength = <2>; <<
872 bias-pull-up; <<
873 }; <<
874 }; <<
875 <<
876 qup1_i2c4_state: qup1-i2c4-state { <<
877 pins = "gpio0", "gpio1"; <<
878 function = "qup12"; <<
879 drive-strength = <2>; <<
880 bias-pull-up; <<
881 }; <<
882 }; <<
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.