1 // SPDX-License-Identifier: BSD-3-Clause
2
3 /dts-v1/;
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/sound/qcom,q6asm.h>
7 #include <dt-bindings/regulator/qcom,rpmh-regu
8
9 #include "sc7180.dtsi"
10
11 #include "pm6150.dtsi"
12 #include "pm6150l.dtsi"
13
14 /delete-node/ &tz_mem;
15 /delete-node/ &ipa_fw_mem;
16
17 / {
18 model = "Acer Aspire 1";
19 compatible = "acer,aspire1", "qcom,sc7
20 chassis-type = "laptop";
21
22 aliases {
23 bluetooth0 = &bluetooth;
24 hsuart0 = &uart3;
25 serial0 = &uart8;
26 wifi0 = &wifi;
27 };
28
29 chosen {
30 stdout-path = "serial0:115200n
31 };
32
33 reserved-memory {
34 zap_mem: zap-shader@80840000 {
35 reg = <0x0 0x80840000
36 no-map;
37 };
38
39 venus_mem: venus@85b00000 {
40 reg = <0x0 0x85b00000
41 no-map;
42 };
43
44 mpss_mem: mpss@86000000 {
45 reg = <0x0 0x86000000
46 no-map;
47 };
48
49 adsp_mem: adsp@8e400000 {
50 reg = <0x0 0x8e400000
51 no-map;
52 };
53
54 wlan_mem: wlan@93900000 {
55 reg = <0x0 0x93900000
56 no-map;
57 };
58 };
59
60 max98357a: audio-codec {
61 compatible = "maxim,max98357a"
62 sdmode-gpios = <&tlmm 23 GPIO_
63
64 pinctrl-0 = <&_sd_mode_defa
65 pinctrl-names = "default";
66
67 #sound-dai-cells = <0>;
68 };
69
70 backlight: backlight {
71 compatible = "pwm-backlight";
72 pwms = <&sn65dsi86_bridge 1000
73 enable-gpios = <&tlmm 10 GPIO_
74
75 pinctrl-0 = <&soc_bkoff_defaul
76 pinctrl-names = "default";
77 };
78
79 reg_brij_1p2: bridge-1p2-regulator {
80 compatible = "regulator-fixed"
81 regulator-name = "brij_1p2";
82 regulator-min-microvolt = <120
83 regulator-max-microvolt = <120
84
85 gpio = <&tlmm 19 GPIO_ACTIVE_H
86 enable-active-high;
87
88 pinctrl-0 = <®_edp_1p2_en_d
89 pinctrl-names = "default";
90 };
91
92 reg_brij_1p8: bridge-regulator {
93 compatible = "regulator-fixed"
94 regulator-name = "brij_1p8";
95 regulator-min-microvolt = <180
96 regulator-max-microvolt = <180
97
98 vin-supply = <&vreg_l8c_1p8>;
99
100 gpio = <&tlmm 20 GPIO_ACTIVE_H
101 enable-active-high;
102
103 pinctrl-0 = <®_edp_1p8_en_d
104 pinctrl-names = "default";
105 };
106
107 reg_codec_3p3: codec-regulator {
108 compatible = "regulator-fixed"
109 regulator-name = "codec_3p3";
110 regulator-min-microvolt = <330
111 regulator-max-microvolt = <330
112
113 gpio = <&tlmm 83 GPIO_ACTIVE_H
114 enable-active-high;
115
116 pinctrl-0 = <®_audio_en_def
117 pinctrl-names = "default";
118 };
119
120 reg_lcm_3p3: panel-regulator {
121 compatible = "regulator-fixed"
122 regulator-name = "lcm_3p3";
123 regulator-min-microvolt = <330
124 regulator-max-microvolt = <330
125
126 gpio = <&tlmm 26 GPIO_ACTIVE_H
127 enable-active-high;
128
129 pinctrl-0 = <®_lcm_en_defau
130 pinctrl-names = "default";
131 };
132
133 sound: sound {
134 compatible = "qcom,sc7180-qdsp
135 pinctrl-0 = <&pri_mi2s_active>
136 pinctrl-names = "default";
137 model = "Acer-Aspire-1";
138
139 audio-routing =
140 "Headphone Jack", "HPO
141 "Headphone Jack", "HPO
142
143 multimedia1-dai-link {
144 link-name = "MultiMedi
145
146 cpu {
147 sound-dai = <&
148 };
149 };
150
151 multimedia2-dai-link {
152 link-name = "MultiMedi
153
154 cpu {
155 sound-dai = <&
156 };
157 };
158
159 multimedia3-dai-link {
160 link-name = "MultiMedi
161
162 cpu {
163 sound-dai = <&
164 };
165 };
166
167 multimedia4-dai-link {
168 link-name = "MultiMedi
169
170 cpu {
171 sound-dai = <&
172 };
173 };
174
175 primary-rx-dai-link {
176 link-name = "Primary M
177
178 cpu {
179 sound-dai = <&
180 };
181
182 platform {
183 sound-dai = <&
184 };
185
186 codec {
187 sound-dai = <&
188 };
189 };
190
191 primary-tx-dai-link {
192 link-name = "Primary M
193
194 cpu {
195 sound-dai = <&
196 };
197
198 platform {
199 sound-dai = <&
200 };
201
202 codec {
203 sound-dai = <&
204 };
205 };
206
207 tertiary-rx-dai-link {
208 link-name = "Tertiary
209
210 cpu {
211 sound-dai = <&
212 };
213
214 platform {
215 sound-dai = <&
216 };
217
218 codec {
219 sound-dai = <&
220 };
221 };
222
223 displayport-rx-dai-link {
224 link-name = "DisplayPo
225
226 cpu {
227 sound-dai = <&
228 };
229
230 platform {
231 sound-dai = <&
232 };
233
234 codec {
235 sound-dai = <&
236 };
237 };
238 };
239
240 reg_tp_3p3: touchpad-regulator {
241 compatible = "regulator-fixed"
242 regulator-name = "tp_3p3";
243 regulator-min-microvolt = <330
244 regulator-max-microvolt = <330
245
246 gpio = <&tlmm 25 GPIO_ACTIVE_H
247 enable-active-high;
248
249 pinctrl-0 = <®_tp_en_defaul
250 pinctrl-names = "default";
251 };
252 };
253
254 &i2c2 {
255 clock-frequency = <400000>;
256 status = "okay";
257
258 embedded-controller@76 {
259 compatible = "acer,aspire1-ec"
260 reg = <0x76>;
261
262 interrupts-extended = <&tlmm 3
263
264 pinctrl-0 = <&ec_int_default>;
265 pinctrl-names = "default";
266
267 connector {
268 compatible = "usb-c-co
269
270 port {
271 ec_dp_in: endp
272 remote
273 };
274 };
275 };
276 };
277 };
278
279 &i2c4 {
280 clock-frequency = <400000>;
281 status = "okay";
282
283 /*
284 * NOTE: DSDT defines two possible tou
285 *
286 * reg = <0x15>;
287 * hid-descr-addr = <0x1>;
288 */
289
290 touchpad@2c {
291 compatible = "hid-over-i2c";
292 reg = <0x2c>;
293 hid-descr-addr = <0x20>;
294
295 vdd-supply = <®_tp_3p3>;
296
297 interrupts-extended = <&tlmm 9
298
299 pinctrl-0 = <&hid_touchpad_def
300 pinctrl-names = "default";
301
302 wakeup-source;
303 };
304
305 keyboard@3a {
306 compatible = "hid-over-i2c";
307 reg = <0x3a>;
308 hid-descr-addr = <0x1>;
309
310 interrupts-extended = <&tlmm 3
311
312 pinctrl-0 = <&hid_keyboard_def
313 pinctrl-names = "default";
314
315 wakeup-source;
316 };
317 };
318
319 &i2c9 {
320 clock-frequency = <400000>;
321 status = "okay";
322
323 alc5682: codec@1a {
324 compatible = "realtek,rt5682i"
325 reg = <0x1a>;
326
327 #sound-dai-cells = <1>;
328
329 interrupt-parent = <&tlmm>;
330 interrupts = <28 IRQ_TYPE_EDGE
331
332 pinctrl-0 = <&codec_irq_defaul
333 pinctrl-names = "default";
334
335 AVDD-supply = <&vreg_l15a_1p8>
336 MICVDD-supply = <®_codec_3p
337 VBAT-supply = <®_codec_3p3>
338 DBVDD-supply = <&vreg_l15a_1p8
339 LDO1-IN-supply = <&vreg_l15a_1
340
341 /*
342 * NOTE: The board has a path
343 * DMIC microphones in the lid
344 * resistors are absent and th
345 * to the SoC instead.
346 *
347 * If the resistors were to be
348 * connect the codec, the foll
349 *
350 * realtek,dmic1-data-pin = <1
351 * realtek,dmic1-clk-pin = <1>
352 */
353
354 realtek,jd-src = <1>;
355 };
356 };
357
358 &i2c10 {
359 clock-frequency = <400000>;
360 status = "okay";
361
362 sn65dsi86_bridge: bridge@2c {
363 compatible = "ti,sn65dsi86";
364 reg = <0x2c>;
365 gpio-controller;
366 #gpio-cells = <2>;
367 #pwm-cells = <1>;
368
369 interrupt-parent = <&tlmm>;
370 interrupts = <11 IRQ_TYPE_LEVE
371
372 enable-gpios = <&tlmm 51 GPIO_
373 suspend-gpios = <&tlmm 22 GPIO
374
375 pinctrl-0 = <&bridge_en_defaul
376 <&edp_bridge_irq_d
377 <&bridge_suspend_d
378 pinctrl-names = "default";
379
380 vpll-supply = <®_brij_1p8>;
381 vccio-supply = <®_brij_1p8>
382 vcca-supply = <®_brij_1p2>;
383 vcc-supply = <®_brij_1p2>;
384
385 clocks = <&rpmhcc RPMH_LN_BB_C
386 clock-names = "refclk";
387
388 ports {
389 #address-cells = <1>;
390 #size-cells = <0>;
391
392 port@0 {
393 reg = <0>;
394
395 sn65dsi86_in:
396 remote
397 };
398 };
399
400 port@1 {
401 reg = <1>;
402
403 sn65dsi86_out:
404 data-l
405 remote
406 };
407 };
408 };
409
410 aux-bus {
411 panel: panel {
412 compatible = "
413 power-supply =
414 backlight = <&
415 hpd-absent-del
416
417 port {
418 panel_
419
420 };
421 };
422 };
423 };
424 };
425 };
426
427 &gpu {
428 status = "okay";
429
430 zap-shader {
431 memory-region = <&zap_mem>;
432 firmware-name = "qcom/sc7180/a
433 };
434 };
435
436 &mdss {
437 status = "okay";
438 };
439
440 &mdss_dp {
441 data-lanes = <0 1>;
442
443 vdda-1p2-supply = <&vreg_l3c_1p2>;
444 vdda-0p9-supply = <&vreg_l4a_0p8>;
445
446 status = "okay";
447 };
448
449 &mdss_dp_out {
450 remote-endpoint = <&ec_dp_in>;
451 };
452
453 &mdss_dsi0 {
454 vdda-supply = <&vreg_l3c_1p2>;
455 status = "okay";
456 };
457
458 &mdss_dsi0_out {
459 remote-endpoint = <&sn65dsi86_in>;
460 data-lanes = <0 1 2 3>;
461 };
462
463 &mdss_dsi0_phy {
464 vdds-supply = <&vreg_l4a_0p8>;
465 status = "okay";
466 };
467
468 &pm6150_adc {
469 channel@4e {
470 reg = <ADC5_AMUX_THM2_100K_PU>
471 qcom,ratiometric;
472 qcom,hw-settle-time = <200>;
473 label = "thermistor";
474 };
475
476 channel@4f {
477 reg = <ADC5_AMUX_THM3_100K_PU>
478 qcom,ratiometric;
479 qcom,hw-settle-time = <200>;
480 label = "charger_thermistor";
481 };
482 };
483
484 &pm6150_adc_tm {
485 status = "okay";
486
487 charger-thermistor@0 {
488 reg = <0>;
489 io-channels = <&pm6150_adc ADC
490 qcom,ratiometric;
491 qcom,hw-settle-time-us = <200>
492 };
493
494 thermistor@1 {
495 reg = <1>;
496 io-channels = <&pm6150_adc ADC
497 qcom,ratiometric;
498 qcom,hw-settle-time-us = <200>
499 };
500 };
501
502 &pm6150_pon {
503 status = "disabled";
504 };
505
506 &pm6150_rtc {
507 status = "okay";
508 };
509
510 &q6afedai {
511 dai@16 {
512 reg = <PRIMARY_MI2S_RX>;
513 qcom,sd-lines = <1>;
514 };
515
516 dai@17 {
517 reg = <PRIMARY_MI2S_TX>;
518 qcom,sd-lines = <0>;
519 };
520
521 dai@20 {
522 reg = <TERTIARY_MI2S_RX>;
523 qcom,sd-lines = <0>;
524 };
525
526 dai@104 {
527 reg = <DISPLAY_PORT_RX>;
528 };
529 };
530
531 &q6asmdai {
532 dai@0 {
533 reg = <0>;
534 };
535
536 dai@1 {
537 reg = <1>;
538 };
539
540 dai@2 {
541 reg = <2>;
542 };
543
544 dai@3 {
545 reg = <3>;
546 };
547 };
548
549 &qupv3_id_0 {
550 status = "okay";
551 };
552
553 &qupv3_id_1 {
554 status = "okay";
555 };
556
557 &remoteproc_adsp {
558 memory-region = <&adsp_mem>;
559 firmware-name = "qcom/sc7180/acer/aspi
560 status = "okay";
561 };
562
563 &remoteproc_mpss {
564 firmware-name = "qcom/sc7180/acer/aspi
565 status = "okay";
566 };
567
568 &sdhc_1 {
569 pinctrl-0 = <&sdc1_default>;
570 pinctrl-1 = <&sdc1_sleep>;
571 pinctrl-names = "default", "sleep";
572 vmmc-supply = <&vreg_l19a_2p9>;
573 vqmmc-supply = <&vreg_l12a_1p8>;
574
575 status = "okay";
576 };
577
578 &uart3 {
579 /delete-property/interrupts;
580 interrupts-extended = <&intc GIC_SPI 6
581 <&tlmm 41 IRQ_TY
582
583 pinctrl-1 = <&qup_uart3_sleep>;
584 pinctrl-names = "default", "sleep";
585
586 status = "okay";
587
588 bluetooth: bluetooth {
589 compatible = "qcom,wcn3991-bt"
590 vddio-supply = <&vreg_l10a_1p8
591 vddxo-supply = <&vreg_l1c_1p8>
592 vddrf-supply = <&vreg_l2c_1p3>
593 vddch0-supply = <&vreg_l10c_3p
594 max-speed = <3200000>;
595 };
596 };
597
598 &uart8 {
599 status = "okay";
600 };
601
602 &usb_1 {
603 status = "okay";
604 };
605
606 &usb_1_dwc3 {
607 dr_mode = "host";
608 #address-cells = <1>;
609 #size-cells = <0>;
610
611 usb_hub_2_x: hub@1 {
612 compatible = "usbbda,5411";
613 reg = <1>;
614 peer-hub = <&usb_hub_3_x>;
615 };
616
617 usb_hub_3_x: hub@2 {
618 compatible = "usbbda,411";
619 reg = <2>;
620 peer-hub = <&usb_hub_2_x>;
621 };
622 };
623
624 &usb_1_hsphy {
625 vdd-supply = <&vreg_l4a_0p8>;
626 vdda-pll-supply = <&vreg_l11a_1p8>;
627 vdda-phy-dpdm-supply = <&vreg_l17a_3p0
628 qcom,imp-res-offset-value = <8>;
629 qcom,preemphasis-level = <QUSB2_V2_PRE
630 qcom,preemphasis-width = <QUSB2_V2_PRE
631 qcom,bias-ctrl-value = <0x22>;
632 qcom,charge-ctrl-value = <3>;
633 qcom,hsdisc-trim-value = <0>;
634
635 status = "okay";
636 };
637
638 &usb_1_qmpphy {
639 vdda-phy-supply = <&vreg_l3c_1p2>;
640 vdda-pll-supply = <&vreg_l4a_0p8>;
641
642 status = "okay";
643 };
644
645 &venus {
646 firmware-name = "qcom/sc7180/acer/aspi
647 };
648
649 &wifi {
650 vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>
651 vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
652 vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
653 vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
654 vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
655
656 status = "okay";
657 };
658
659 &apps_rsc {
660 regulators-0 {
661 compatible = "qcom,pm6150-rpmh
662 qcom,pmic-id = "a";
663
664 vreg_s1a_1p1: smps1 {
665 regulator-min-microvol
666 regulator-max-microvol
667 };
668
669 vreg_l4a_0p8: ldo4 {
670 regulator-min-microvol
671 regulator-max-microvol
672 regulator-initial-mode
673 };
674
675 vreg_l9a_0p6: ldo9 {
676 regulator-min-microvol
677 regulator-max-microvol
678 regulator-initial-mode
679 };
680
681 vreg_l10a_1p8: ldo10 {
682 regulator-min-microvol
683 regulator-max-microvol
684 regulator-initial-mode
685 regulator-always-on;
686 regulator-boot-on;
687 };
688
689 vreg_l11a_1p8: ldo11 {
690 regulator-min-microvol
691 regulator-max-microvol
692 regulator-initial-mode
693 };
694
695 vreg_l12a_1p8: ldo12 {
696 regulator-min-microvol
697 regulator-max-microvol
698 regulator-initial-mode
699 };
700
701 vreg_l13a_1p8: ldo13 {
702 regulator-min-microvol
703 regulator-max-microvol
704 regulator-initial-mode
705 };
706
707 vreg_l14a_1p8: ldo14 {
708 regulator-min-microvol
709 regulator-max-microvol
710 regulator-initial-mode
711 };
712
713 vreg_l15a_1p8: ldo15 {
714 regulator-min-microvol
715 regulator-max-microvol
716 regulator-initial-mode
717 };
718
719 vreg_l16a_2p7: ldo16 {
720 regulator-min-microvol
721 regulator-max-microvol
722 regulator-initial-mode
723 };
724
725 vreg_l17a_3p0: ldo17 {
726 regulator-min-microvol
727 regulator-max-microvol
728 regulator-initial-mode
729 };
730
731 vreg_l18a_2p8: ldo18 {
732 regulator-min-microvol
733 regulator-max-microvol
734 regulator-initial-mode
735 };
736
737 vreg_l19a_2p9: ldo19 {
738 regulator-min-microvol
739 regulator-max-microvol
740 regulator-initial-mode
741 };
742 };
743
744 regulators-1 {
745 compatible = "qcom,pm6150l-rpm
746 qcom,pmic-id = "c";
747
748 vreg_s8c_1p3: smps8 {
749 regulator-min-microvol
750 regulator-max-microvol
751 };
752
753 vreg_l1c_1p8: ldo1 {
754 regulator-min-microvol
755 regulator-max-microvol
756 regulator-initial-mode
757 };
758
759 vreg_l2c_1p3: ldo2 {
760 regulator-min-microvol
761 regulator-max-microvol
762 regulator-initial-mode
763 };
764
765 vreg_l3c_1p2: ldo3 {
766 regulator-min-microvol
767 regulator-max-microvol
768 regulator-initial-mode
769 };
770
771 vreg_l4c_1p8: ldo4 {
772 regulator-min-microvol
773 regulator-max-microvol
774 regulator-initial-mode
775 };
776
777 vreg_l5c_1p8: ldo5 {
778 regulator-min-microvol
779 regulator-max-microvol
780 regulator-initial-mode
781 };
782
783 vreg_l6c_2p9: ldo6 {
784 regulator-min-microvol
785 regulator-max-microvol
786 regulator-initial-mode
787 };
788
789 vreg_l7c_3p0: ldo7 {
790 regulator-min-microvol
791 regulator-max-microvol
792 regulator-initial-mode
793 };
794
795 vreg_l8c_1p8: ldo8 {
796 regulator-min-microvol
797 regulator-max-microvol
798 regulator-initial-mode
799 };
800
801 vreg_l9c_2p9: ldo9 {
802 regulator-min-microvol
803 regulator-max-microvol
804 regulator-initial-mode
805 };
806
807 vreg_l10c_3p3: ldo10 {
808 regulator-min-microvol
809 regulator-max-microvol
810 regulator-initial-mode
811 };
812
813 vreg_l11c_3p3: ldo11 {
814 regulator-min-microvol
815 regulator-max-microvol
816 regulator-initial-mode
817 };
818
819 vreg_bob: bob {
820 regulator-min-microvol
821 regulator-max-microvol
822 regulator-initial-mode
823 };
824 };
825 };
826
827 &qup_i2c2_default {
828 drive-strength = <2>;
829
830 /* Has external pullup */
831 bias-disable;
832 };
833
834 &qup_i2c4_default {
835 drive-strength = <2>;
836
837 /* Has external pullup */
838 bias-disable;
839 };
840
841 &qup_i2c9_default {
842 drive-strength = <2>;
843
844 /* Has external pullup */
845 bias-disable;
846 };
847
848 &qup_i2c10_default {
849 drive-strength = <2>;
850
851 /* Has external pullup */
852 bias-disable;
853 };
854
855 &tlmm {
856 /*
857 * The TZ seem to protect those becaus
858 * fingerprint sensor connected to thi
859 * on this board
860 */
861 gpio-reserved-ranges = <58 5>;
862
863 amp_sd_mode_default: amp-sd-mode-deaul
864 pins = "gpio23";
865 function = "gpio";
866 drive-strength = <16>;
867 bias-disable;
868 };
869
870 bridge_en_default: bridge-en-default-s
871 pins = "gpio51";
872 function = "gpio";
873 drive-strength = <16>;
874 bias-disable;
875 };
876
877 bridge_suspend_default: bridge-suspend
878 pins = "gpio22";
879 function = "gpio";
880 drive-strength = <16>;
881 bias-pull-up;
882 };
883
884 codec_irq_default: codec-irq-deault-st
885 pins = "gpio28";
886 function = "gpio";
887 drive-strength = <2>;
888 bias-disable;
889 };
890
891 ec_int_default: ec-int-default-state {
892 pins = "gpio30";
893 function = "gpio";
894 drive-strength = <2>;
895 bias-disable;
896 };
897
898 edp_bridge_irq_default: edp-bridge-irq
899 pins = "gpio11";
900 function = "gpio";
901 drive-strength = <2>;
902 bias-pull-down;
903 };
904
905 hid_keyboard_default: hid-keyboard-def
906 pins = "gpio33";
907 function = "gpio";
908 drive-strength = <2>;
909 bias-disable;
910 };
911
912 hid_touchpad_default: hid-touchpad-def
913 pins = "gpio94";
914 function = "gpio";
915 drive-strength = <2>;
916 bias-disable;
917 };
918
919 qup_uart3_sleep: qup-uart3-sleep-state
920 cts-pins {
921 /*
922 * Configure a pull-do
923 * the Bluetooth modul
924 */
925 pins = "gpio38";
926 function = "gpio";
927 bias-pull-down;
928 };
929
930 rts-pins {
931 /*
932 * Configure pull-down
933 * signal, pull it low
934 * can wakeup the syst
935 * pulling RX low (by
936 */
937 pins = "gpio39";
938 function = "gpio";
939 bias-pull-down;
940 };
941
942 tx-pins {
943 /*
944 * Configure pull-up o
945 * to prevent BT SoC f
946 */
947 pins = "gpio40";
948 function = "gpio";
949 bias-pull-up;
950 };
951
952 rx-pins {
953 /*
954 * Configure a pull-up
955 * garbage data when t
956 * is floating which m
957 */
958 pins = "gpio41";
959 function = "gpio";
960 bias-pull-up;
961 };
962 };
963
964 reg_edp_1p2_en_default: reg-edp-1p2-en
965 pins = "gpio19";
966 function = "gpio";
967 drive-strength = <16>;
968 bias-disable;
969 };
970
971 reg_edp_1p8_en_default: reg-edp-1p8-en
972 pins = "gpio20";
973 function = "gpio";
974 drive-strength = <16>;
975 bias-disable;
976 };
977
978 reg_lcm_en_default: reg-lcm-en-deault-
979 pins = "gpio26";
980 function = "gpio";
981 drive-strength = <16>;
982 bias-disable;
983 };
984
985 reg_audio_en_default: reg-audio-en-dea
986 pins = "gpio83";
987 function = "gpio";
988 drive-strength = <2>;
989 bias-disable;
990 };
991
992 reg_tp_en_default: reg-tp-en-deault-st
993 pins = "gpio25";
994 function = "gpio";
995 drive-strength = <2>;
996 bias-disable;
997 };
998
999 soc_bkoff_default: soc-bkoff-deault-st
1000 pins = "gpio10";
1001 function = "gpio";
1002 drive-strength = <16>;
1003 bias-disable;
1004 };
1005
1006 sdc1_default: sdc1-default-state {
1007 clk-pins {
1008 pins = "sdc1_clk";
1009 drive-strength = <16>
1010 bias-disable;
1011 };
1012
1013 cmd-pins {
1014 pins = "sdc1_cmd";
1015 drive-strength = <16>
1016 bias-pull-up;
1017 };
1018
1019 data-pins {
1020 pins = "sdc1_data";
1021 drive-strength = <16>
1022 bias-pull-up;
1023 };
1024
1025 rclk-pins {
1026 pins = "sdc1_rclk";
1027 bias-pull-down;
1028 };
1029 };
1030
1031 sdc1_sleep: sdc1-sleep-state {
1032 clk-pins {
1033 pins = "sdc1_clk";
1034 drive-strength = <2>;
1035 bias-disable;
1036 };
1037
1038 cmd-pins {
1039 pins = "sdc1_cmd";
1040 drive-strength = <2>;
1041 bias-pull-up;
1042 };
1043
1044 data-pins {
1045 pins = "sdc1_data";
1046 drive-strength = <2>;
1047 bias-pull-up;
1048 };
1049
1050 rclk-pins {
1051 pins = "sdc1_rclk";
1052 bias-pull-down;
1053 };
1054 };
1055 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.