1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * SC7180 IDP board device tree source 3 * SC7180 IDP board device tree source
4 * 4 *
5 * Copyright (c) 2019, The Linux Foundation. A 5 * Copyright (c) 2019, The Linux Foundation. All rights reserved.
6 */ 6 */
7 7
8 /dts-v1/; 8 /dts-v1/;
9 9
10 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regu 11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h <<
13 #include "sc7180.dtsi" 12 #include "sc7180.dtsi"
14 #include "sc7180-firmware-tfa.dtsi" <<
15 #include "pm6150.dtsi" 13 #include "pm6150.dtsi"
16 #include "pm6150l.dtsi" 14 #include "pm6150l.dtsi"
17 15
18 / { 16 / {
19 model = "Qualcomm Technologies, Inc. S 17 model = "Qualcomm Technologies, Inc. SC7180 IDP";
20 compatible = "qcom,sc7180-idp", "qcom, 18 compatible = "qcom,sc7180-idp", "qcom,sc7180";
21 19
22 aliases { 20 aliases {
23 bluetooth0 = &bluetooth; 21 bluetooth0 = &bluetooth;
24 hsuart0 = &uart3; 22 hsuart0 = &uart3;
25 serial0 = &uart8; 23 serial0 = &uart8;
26 wifi0 = &wifi; 24 wifi0 = &wifi;
27 }; 25 };
28 26
29 chosen { 27 chosen {
30 stdout-path = "serial0:115200n 28 stdout-path = "serial0:115200n8";
31 }; 29 };
32 }; 30 };
33 31
34 /* 32 /*
35 * Reserved memory changes 33 * Reserved memory changes
36 * 34 *
37 * Delete all unused memory nodes and define t 35 * Delete all unused memory nodes and define the peripheral memory regions
38 * required by the board dts. 36 * required by the board dts.
39 * 37 *
40 */ 38 */
41 39
42 /delete-node/ &hyp_mem; 40 /delete-node/ &hyp_mem;
43 /delete-node/ &xbl_mem; 41 /delete-node/ &xbl_mem;
44 /delete-node/ &aop_mem; 42 /delete-node/ &aop_mem;
45 /delete-node/ &sec_apps_mem; 43 /delete-node/ &sec_apps_mem;
46 /delete-node/ &tz_mem; 44 /delete-node/ &tz_mem;
47 45
48 /* Increase the size from 2MB to 8MB */ 46 /* Increase the size from 2MB to 8MB */
49 &rmtfs_mem { 47 &rmtfs_mem {
50 reg = <0x0 0x94600000 0x0 0x800000>; !! 48 reg = <0x0 0x84400000 0x0 0x800000>;
51 }; 49 };
52 50
53 / { 51 / {
54 reserved-memory { 52 reserved-memory {
55 atf_mem: memory@80b00000 { 53 atf_mem: memory@80b00000 {
56 reg = <0x0 0x80b00000 54 reg = <0x0 0x80b00000 0x0 0x100000>;
57 no-map; 55 no-map;
58 }; 56 };
59 57
60 mpss_mem: memory@86000000 { 58 mpss_mem: memory@86000000 {
61 reg = <0x0 0x86000000 59 reg = <0x0 0x86000000 0x0 0x8c00000>;
62 no-map; 60 no-map;
63 }; 61 };
64 62
65 camera_mem: memory@8ec00000 { 63 camera_mem: memory@8ec00000 {
66 reg = <0x0 0x8ec00000 64 reg = <0x0 0x8ec00000 0x0 0x500000>;
67 no-map; 65 no-map;
68 }; 66 };
69 67
70 venus_mem: memory@8f600000 { 68 venus_mem: memory@8f600000 {
71 reg = <0 0x8f600000 0 69 reg = <0 0x8f600000 0 0x500000>;
72 no-map; 70 no-map;
73 }; 71 };
74 72
75 wlan_mem: memory@94100000 { 73 wlan_mem: memory@94100000 {
76 reg = <0x0 0x94100000 74 reg = <0x0 0x94100000 0x0 0x200000>;
77 no-map; 75 no-map;
78 }; 76 };
79 77
80 mba_mem: memory@94400000 { 78 mba_mem: memory@94400000 {
81 reg = <0x0 0x94400000 79 reg = <0x0 0x94400000 0x0 0x200000>;
82 no-map; 80 no-map;
83 }; 81 };
84 <<
85 mdata_mem: mpss-metadata { <<
86 alloc-ranges = <0x0 0x <<
87 size = <0x0 0x4000>; <<
88 no-map; <<
89 }; <<
90 }; 82 };
91 }; 83 };
92 84
93 &apps_rsc { 85 &apps_rsc {
94 regulators-0 { !! 86 pm6150-rpmh-regulators {
95 compatible = "qcom,pm6150-rpmh 87 compatible = "qcom,pm6150-rpmh-regulators";
96 qcom,pmic-id = "a"; 88 qcom,pmic-id = "a";
97 89
98 vreg_s1a_1p1: smps1 { 90 vreg_s1a_1p1: smps1 {
99 regulator-min-microvol 91 regulator-min-microvolt = <1128000>;
100 regulator-max-microvol 92 regulator-max-microvolt = <1128000>;
101 }; 93 };
102 94
103 vreg_s4a_1p0: smps4 { 95 vreg_s4a_1p0: smps4 {
104 regulator-min-microvol 96 regulator-min-microvolt = <824000>;
105 regulator-max-microvol 97 regulator-max-microvolt = <1120000>;
106 }; 98 };
107 99
108 vreg_s5a_2p0: smps5 { 100 vreg_s5a_2p0: smps5 {
109 regulator-min-microvol 101 regulator-min-microvolt = <1744000>;
110 regulator-max-microvol 102 regulator-max-microvolt = <2040000>;
111 }; 103 };
112 104
113 vreg_l1a_1p2: ldo1 { 105 vreg_l1a_1p2: ldo1 {
114 regulator-min-microvol 106 regulator-min-microvolt = <1178000>;
115 regulator-max-microvol 107 regulator-max-microvolt = <1256000>;
116 regulator-initial-mode 108 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
117 }; 109 };
118 110
119 vreg_l2a_1p0: ldo2 { 111 vreg_l2a_1p0: ldo2 {
120 regulator-min-microvol 112 regulator-min-microvolt = <944000>;
121 regulator-max-microvol 113 regulator-max-microvolt = <1056000>;
122 regulator-initial-mode 114 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
123 }; 115 };
124 116
125 vreg_l3a_1p0: ldo3 { 117 vreg_l3a_1p0: ldo3 {
126 regulator-min-microvol 118 regulator-min-microvolt = <968000>;
127 regulator-max-microvol 119 regulator-max-microvolt = <1064000>;
128 regulator-initial-mode 120 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
129 }; 121 };
130 122
131 vreg_l4a_0p8: ldo4 { 123 vreg_l4a_0p8: ldo4 {
132 regulator-min-microvol 124 regulator-min-microvolt = <824000>;
133 regulator-max-microvol 125 regulator-max-microvolt = <928000>;
134 regulator-initial-mode 126 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
135 }; 127 };
136 128
137 vreg_l5a_2p7: ldo5 { 129 vreg_l5a_2p7: ldo5 {
138 regulator-min-microvol 130 regulator-min-microvolt = <2496000>;
139 regulator-max-microvol 131 regulator-max-microvolt = <3000000>;
140 regulator-initial-mode 132 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
141 }; 133 };
142 134
143 vreg_l6a_0p6: ldo6 { 135 vreg_l6a_0p6: ldo6 {
144 regulator-min-microvol 136 regulator-min-microvolt = <568000>;
145 regulator-max-microvol 137 regulator-max-microvolt = <648000>;
146 regulator-initial-mode 138 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
147 }; 139 };
148 140
149 vreg_l9a_0p6: ldo9 { 141 vreg_l9a_0p6: ldo9 {
150 regulator-min-microvol 142 regulator-min-microvolt = <488000>;
151 regulator-max-microvol 143 regulator-max-microvolt = <800000>;
152 regulator-initial-mode 144 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
153 }; 145 };
154 146
155 vreg_l10a_1p8: ldo10 { 147 vreg_l10a_1p8: ldo10 {
156 regulator-min-microvol 148 regulator-min-microvolt = <1800000>;
157 regulator-max-microvol 149 regulator-max-microvolt = <1832000>;
158 regulator-initial-mode 150 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
159 }; 151 };
160 152
161 vreg_l11a_1p8: ldo11 { 153 vreg_l11a_1p8: ldo11 {
162 regulator-min-microvol 154 regulator-min-microvolt = <1696000>;
163 regulator-max-microvol 155 regulator-max-microvolt = <1904000>;
164 regulator-initial-mode 156 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
165 }; 157 };
166 158
167 vreg_l12a_1p8: ldo12 { 159 vreg_l12a_1p8: ldo12 {
168 regulator-min-microvol 160 regulator-min-microvolt = <1800000>;
169 regulator-max-microvol 161 regulator-max-microvolt = <1800000>;
170 regulator-initial-mode 162 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
171 }; 163 };
172 164
173 vreg_l13a_1p8: ldo13 { 165 vreg_l13a_1p8: ldo13 {
174 regulator-min-microvol 166 regulator-min-microvolt = <1696000>;
175 regulator-max-microvol 167 regulator-max-microvolt = <1904000>;
176 regulator-initial-mode 168 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
177 }; 169 };
178 170
179 vreg_l14a_1p8: ldo14 { 171 vreg_l14a_1p8: ldo14 {
180 regulator-min-microvol 172 regulator-min-microvolt = <1728000>;
181 regulator-max-microvol 173 regulator-max-microvolt = <1832000>;
182 regulator-initial-mode 174 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
183 }; 175 };
184 176
185 vreg_l15a_1p8: ldo15 { 177 vreg_l15a_1p8: ldo15 {
186 regulator-min-microvol 178 regulator-min-microvolt = <1696000>;
187 regulator-max-microvol 179 regulator-max-microvolt = <1904000>;
188 regulator-initial-mode 180 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
189 }; 181 };
190 182
191 vreg_l16a_2p7: ldo16 { 183 vreg_l16a_2p7: ldo16 {
192 regulator-min-microvol 184 regulator-min-microvolt = <2496000>;
193 regulator-max-microvol 185 regulator-max-microvolt = <3304000>;
194 regulator-initial-mode 186 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
195 }; 187 };
196 188
197 vreg_l17a_3p0: ldo17 { 189 vreg_l17a_3p0: ldo17 {
198 regulator-min-microvol 190 regulator-min-microvolt = <2920000>;
199 regulator-max-microvol 191 regulator-max-microvolt = <3232000>;
200 regulator-initial-mode 192 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
201 }; 193 };
202 194
203 vreg_l18a_2p8: ldo18 { 195 vreg_l18a_2p8: ldo18 {
204 regulator-min-microvol 196 regulator-min-microvolt = <2496000>;
205 regulator-max-microvol 197 regulator-max-microvolt = <3304000>;
206 regulator-initial-mode 198 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
207 }; 199 };
208 200
209 vreg_l19a_2p9: ldo19 { 201 vreg_l19a_2p9: ldo19 {
210 regulator-min-microvol 202 regulator-min-microvolt = <2960000>;
211 regulator-max-microvol 203 regulator-max-microvolt = <2960000>;
212 regulator-initial-mode 204 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
213 }; 205 };
214 }; 206 };
215 207
216 regulators-1 { !! 208 pm6150l-rpmh-regulators {
217 compatible = "qcom,pm6150l-rpm 209 compatible = "qcom,pm6150l-rpmh-regulators";
218 qcom,pmic-id = "c"; 210 qcom,pmic-id = "c";
219 211
220 vreg_s8c_1p3: smps8 { 212 vreg_s8c_1p3: smps8 {
221 regulator-min-microvol 213 regulator-min-microvolt = <1120000>;
222 regulator-max-microvol 214 regulator-max-microvolt = <1408000>;
223 }; 215 };
224 216
225 vreg_l1c_1p8: ldo1 { 217 vreg_l1c_1p8: ldo1 {
226 regulator-min-microvol 218 regulator-min-microvolt = <1616000>;
227 regulator-max-microvol 219 regulator-max-microvolt = <1984000>;
228 regulator-initial-mode 220 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
229 }; 221 };
230 222
231 vreg_l2c_1p3: ldo2 { 223 vreg_l2c_1p3: ldo2 {
232 regulator-min-microvol 224 regulator-min-microvolt = <1168000>;
233 regulator-max-microvol 225 regulator-max-microvolt = <1304000>;
234 regulator-initial-mode 226 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
235 }; 227 };
236 228
237 vreg_l3c_1p2: ldo3 { 229 vreg_l3c_1p2: ldo3 {
238 regulator-min-microvol 230 regulator-min-microvolt = <1144000>;
239 regulator-max-microvol 231 regulator-max-microvolt = <1304000>;
240 regulator-initial-mode 232 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
241 }; 233 };
242 234
243 vreg_l4c_1p8: ldo4 { 235 vreg_l4c_1p8: ldo4 {
244 regulator-min-microvol 236 regulator-min-microvolt = <1648000>;
245 regulator-max-microvol 237 regulator-max-microvolt = <3304000>;
246 regulator-initial-mode 238 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
247 }; 239 };
248 240
249 vreg_l5c_1p8: ldo5 { 241 vreg_l5c_1p8: ldo5 {
250 regulator-min-microvol 242 regulator-min-microvolt = <1648000>;
251 regulator-max-microvol 243 regulator-max-microvolt = <3304000>;
252 regulator-initial-mode 244 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
253 }; 245 };
254 246
255 vreg_l6c_2p9: ldo6 { 247 vreg_l6c_2p9: ldo6 {
256 regulator-min-microvol 248 regulator-min-microvolt = <1800000>;
257 regulator-max-microvol 249 regulator-max-microvolt = <2950000>;
258 regulator-initial-mode 250 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
259 }; 251 };
260 252
261 vreg_l7c_3p0: ldo7 { 253 vreg_l7c_3p0: ldo7 {
262 regulator-min-microvol 254 regulator-min-microvolt = <3000000>;
263 regulator-max-microvol 255 regulator-max-microvolt = <3312000>;
264 regulator-initial-mode 256 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
265 }; 257 };
266 258
267 vreg_l8c_1p8: ldo8 { 259 vreg_l8c_1p8: ldo8 {
268 regulator-min-microvol 260 regulator-min-microvolt = <1800000>;
269 regulator-max-microvol 261 regulator-max-microvolt = <1904000>;
270 regulator-initial-mode 262 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
271 }; 263 };
272 264
273 vreg_l9c_2p9: ldo9 { 265 vreg_l9c_2p9: ldo9 {
274 regulator-min-microvol 266 regulator-min-microvolt = <2960000>;
275 regulator-max-microvol 267 regulator-max-microvolt = <2960000>;
276 regulator-initial-mode 268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
277 }; 269 };
278 270
279 vreg_l10c_3p3: ldo10 { 271 vreg_l10c_3p3: ldo10 {
280 regulator-min-microvol 272 regulator-min-microvolt = <3000000>;
281 regulator-max-microvol 273 regulator-max-microvolt = <3400000>;
282 regulator-initial-mode 274 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
283 }; 275 };
284 276
285 vreg_l11c_3p3: ldo11 { 277 vreg_l11c_3p3: ldo11 {
286 regulator-min-microvol 278 regulator-min-microvolt = <3000000>;
287 regulator-max-microvol 279 regulator-max-microvolt = <3400000>;
288 regulator-initial-mode 280 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
289 }; 281 };
290 282
291 vreg_bob: bob { 283 vreg_bob: bob {
292 regulator-min-microvol 284 regulator-min-microvolt = <3008000>;
293 regulator-max-microvol 285 regulator-max-microvolt = <3960000>;
294 regulator-initial-mode 286 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
295 }; 287 };
296 }; 288 };
297 }; 289 };
298 290
299 &mdss { <<
300 status = "okay"; <<
301 }; <<
302 <<
303 &mdss_dsi0 { <<
304 status = "okay"; <<
305 <<
306 vdda-supply = <&vreg_l3c_1p2>; <<
307 <<
308 panel@0 { <<
309 compatible = "visionox,rm69299 <<
310 reg = <0>; <<
311 <<
312 vdda-supply = <&vreg_l8c_1p8>; <<
313 vdd3p3-supply = <&vreg_l18a_2p <<
314 <<
315 pinctrl-names = "default"; <<
316 pinctrl-0 = <&disp_pins>; <<
317 <<
318 reset-gpios = <&pm6150l_gpios <<
319 <<
320 port { <<
321 panel0_in: endpoint { <<
322 remote-endpoin <<
323 }; <<
324 }; <<
325 }; <<
326 <<
327 ports { <<
328 port@1 { <<
329 endpoint { <<
330 remote-endpoin <<
331 data-lanes = < <<
332 }; <<
333 }; <<
334 }; <<
335 }; <<
336 <<
337 &mdss_dsi0_phy { <<
338 status = "okay"; <<
339 vdds-supply = <&vreg_l4a_0p8>; <<
340 }; <<
341 <<
342 &qfprom { 291 &qfprom {
343 vcc-supply = <&vreg_l11a_1p8>; 292 vcc-supply = <&vreg_l11a_1p8>;
344 }; 293 };
345 294
346 &qspi { 295 &qspi {
347 status = "okay"; 296 status = "okay";
348 pinctrl-names = "default"; 297 pinctrl-names = "default";
349 pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, !! 298 pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
350 299
351 flash@0 { 300 flash@0 {
352 compatible = "jedec,spi-nor"; 301 compatible = "jedec,spi-nor";
353 reg = <0>; 302 reg = <0>;
354 spi-max-frequency = <25000000> 303 spi-max-frequency = <25000000>;
355 spi-tx-bus-width = <2>; 304 spi-tx-bus-width = <2>;
356 spi-rx-bus-width = <2>; 305 spi-rx-bus-width = <2>;
357 }; 306 };
358 }; 307 };
359 308
360 &qupv3_id_0 { 309 &qupv3_id_0 {
361 status = "okay"; 310 status = "okay";
362 }; 311 };
363 312
364 &qupv3_id_1 { 313 &qupv3_id_1 {
365 status = "okay"; 314 status = "okay";
366 }; 315 };
367 316
368 &remoteproc_mpss { 317 &remoteproc_mpss {
369 status = "okay"; 318 status = "okay";
370 compatible = "qcom,sc7180-mss-pil"; 319 compatible = "qcom,sc7180-mss-pil";
371 reg = <0 0x04080000 0 0x4040>, <0 0x04 <<
372 reg-names = "qdsp6", "rmb"; <<
373 <<
374 clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, <<
375 <&gcc GCC_MSS_Q6_MEMNOC_AXI_C <<
376 <&gcc GCC_MSS_NAV_AXI_CLK>, <<
377 <&gcc GCC_MSS_SNOC_AXI_CLK>, <<
378 <&gcc GCC_MSS_MFAB_AXIS_CLK>, <<
379 <&rpmhcc RPMH_CXO_CLK>; <<
380 clock-names = "iface", "bus", "nav", " <<
381 <<
382 iommus = <&apps_smmu 0x461 0x0>, <&app 320 iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
383 memory-region = <&mba_mem>, <&mpss_mem !! 321 memory-region = <&mba_mem &mpss_mem>;
384 <<
385 resets = <&aoss_reset AOSS_CC_MSS_REST <<
386 <&pdc_reset PDC_MODEM_SYNC_RE <<
387 reset-names = "mss_restart", "pdc_rese <<
388 <<
389 qcom,halt-regs = <&tcsr_regs_1 0x3000 <<
390 qcom,spare-regs = <&tcsr_regs_2 0xb3e4 <<
391 }; <<
392 <<
393 &scm { <<
394 /* TF-A firmware maps memory cached so <<
395 dma-coherent; <<
396 }; 322 };
397 323
398 &sdhc_1 { 324 &sdhc_1 {
399 status = "okay"; 325 status = "okay";
400 326
401 pinctrl-names = "default", "sleep"; 327 pinctrl-names = "default", "sleep";
402 pinctrl-0 = <&sdc1_on>; 328 pinctrl-0 = <&sdc1_on>;
403 pinctrl-1 = <&sdc1_off>; 329 pinctrl-1 = <&sdc1_off>;
404 vmmc-supply = <&vreg_l19a_2p9>; 330 vmmc-supply = <&vreg_l19a_2p9>;
405 vqmmc-supply = <&vreg_l12a_1p8>; 331 vqmmc-supply = <&vreg_l12a_1p8>;
406 }; 332 };
407 333
408 &sdhc_2 { 334 &sdhc_2 {
409 status = "okay"; 335 status = "okay";
410 336
411 pinctrl-names = "default","sleep"; 337 pinctrl-names = "default","sleep";
412 pinctrl-0 = <&sdc2_on>; 338 pinctrl-0 = <&sdc2_on>;
413 pinctrl-1 = <&sdc2_off>; 339 pinctrl-1 = <&sdc2_off>;
414 vmmc-supply = <&vreg_l9c_2p9>; !! 340 vmmc-supply = <&vreg_l9c_2p9>;
415 vqmmc-supply = <&vreg_l6c_2p9>; 341 vqmmc-supply = <&vreg_l6c_2p9>;
416 342
417 cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; 343 cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
418 }; 344 };
419 345
420 &uart3 { 346 &uart3 {
421 status = "okay"; 347 status = "okay";
422 348
423 /delete-property/interrupts; 349 /delete-property/interrupts;
424 interrupts-extended = <&intc GIC_SPI 6 350 interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
425 <&tlmm 41 IRQ_ 351 <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
426 352
427 pinctrl-names = "default", "sleep"; 353 pinctrl-names = "default", "sleep";
428 pinctrl-1 = <&qup_uart3_sleep>; 354 pinctrl-1 = <&qup_uart3_sleep>;
429 355
430 bluetooth: bluetooth { !! 356 bluetooth: wcn3990-bt {
431 compatible = "qcom,wcn3990-bt" 357 compatible = "qcom,wcn3990-bt";
432 vddio-supply = <&vreg_l10a_1p8 358 vddio-supply = <&vreg_l10a_1p8>;
433 vddxo-supply = <&vreg_l1c_1p8> 359 vddxo-supply = <&vreg_l1c_1p8>;
434 vddrf-supply = <&vreg_l2c_1p3> 360 vddrf-supply = <&vreg_l2c_1p3>;
435 vddch0-supply = <&vreg_l10c_3p 361 vddch0-supply = <&vreg_l10c_3p3>;
436 max-speed = <3200000>; 362 max-speed = <3200000>;
437 }; 363 };
438 }; 364 };
439 365
440 &uart8 { 366 &uart8 {
441 status = "okay"; 367 status = "okay";
442 }; 368 };
443 369
444 &usb_1 { 370 &usb_1 {
445 status = "okay"; 371 status = "okay";
446 }; 372 };
447 373
448 &usb_1_dwc3 { 374 &usb_1_dwc3 {
449 dr_mode = "host"; 375 dr_mode = "host";
450 }; 376 };
451 377
452 &usb_1_hsphy { 378 &usb_1_hsphy {
453 status = "okay"; 379 status = "okay";
454 vdd-supply = <&vreg_l4a_0p8>; 380 vdd-supply = <&vreg_l4a_0p8>;
455 vdda-pll-supply = <&vreg_l11a_1p8>; 381 vdda-pll-supply = <&vreg_l11a_1p8>;
456 vdda-phy-dpdm-supply = <&vreg_l17a_3p0 382 vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
457 qcom,imp-res-offset-value = <8>; 383 qcom,imp-res-offset-value = <8>;
458 qcom,preemphasis-level = <QUSB2_V2_PRE 384 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
459 qcom,preemphasis-width = <QUSB2_V2_PRE 385 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
460 qcom,bias-ctrl-value = <0x22>; 386 qcom,bias-ctrl-value = <0x22>;
461 qcom,charge-ctrl-value = <3>; 387 qcom,charge-ctrl-value = <3>;
462 qcom,hsdisc-trim-value = <0>; 388 qcom,hsdisc-trim-value = <0>;
463 }; 389 };
464 390
465 &usb_1_qmpphy { 391 &usb_1_qmpphy {
466 status = "okay"; 392 status = "okay";
467 vdda-phy-supply = <&vreg_l3c_1p2>; 393 vdda-phy-supply = <&vreg_l3c_1p2>;
468 vdda-pll-supply = <&vreg_l4a_0p8>; 394 vdda-pll-supply = <&vreg_l4a_0p8>;
469 }; 395 };
470 396
471 &venus { 397 &venus {
472 video-firmware { 398 video-firmware {
473 iommus = <&apps_smmu 0x0c42 0x 399 iommus = <&apps_smmu 0x0c42 0x0>;
474 }; 400 };
475 }; 401 };
476 402
477 &wifi { 403 &wifi {
478 status = "okay"; 404 status = "okay";
479 vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6> 405 vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
480 vdd-1.8-xo-supply = <&vreg_l1c_1p8>; 406 vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
481 vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; 407 vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
482 vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; 408 vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
483 vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; 409 vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
484 wifi-firmware { 410 wifi-firmware {
485 iommus = <&apps_smmu 0xc2 0x1> 411 iommus = <&apps_smmu 0xc2 0x1>;
486 }; 412 };
487 }; 413 };
488 414
489 /* PINCTRL - additions to nodes defined in sc7 415 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
490 416
491 &pm6150l_gpios { <<
492 disp_pins: disp-state { <<
493 pinconf { <<
494 pins = "gpio3"; <<
495 function = PMIC_GPIO_F <<
496 qcom,drive-strength = <<
497 power-source = <0>; <<
498 bias-disable; <<
499 output-low; <<
500 }; <<
501 }; <<
502 }; <<
503 <<
504 &qspi_clk { 417 &qspi_clk {
505 bias-disable; !! 418 pinconf {
>> 419 pins = "gpio63";
>> 420 bias-disable;
>> 421 };
506 }; 422 };
507 423
508 &qspi_cs0 { 424 &qspi_cs0 {
509 bias-disable; !! 425 pinconf {
>> 426 pins = "gpio68";
>> 427 bias-disable;
>> 428 };
510 }; 429 };
511 430
512 &qspi_data0 { !! 431 &qspi_data01 {
513 bias-pull-up; !! 432 pinconf {
514 }; !! 433 pins = "gpio64", "gpio65";
515 434
516 &qspi_data1 { !! 435 /* High-Z when no transfers; nice to park the lines */
517 bias-pull-up; !! 436 bias-pull-up;
>> 437 };
518 }; 438 };
519 439
520 &qup_i2c2_default { 440 &qup_i2c2_default {
521 drive-strength = <2>; !! 441 pinconf {
>> 442 pins = "gpio15", "gpio16";
>> 443 drive-strength = <2>;
522 444
523 /* Has external pullup */ !! 445 /* Has external pullup */
524 bias-disable; !! 446 bias-disable;
>> 447 };
525 }; 448 };
526 449
527 &qup_i2c4_default { 450 &qup_i2c4_default {
528 drive-strength = <2>; !! 451 pinconf {
>> 452 pins = "gpio115", "gpio116";
>> 453 drive-strength = <2>;
529 454
530 /* Has external pullup */ !! 455 /* Has external pullup */
531 bias-disable; !! 456 bias-disable;
>> 457 };
532 }; 458 };
533 459
534 &qup_i2c7_default { 460 &qup_i2c7_default {
535 drive-strength = <2>; !! 461 pinconf {
>> 462 pins = "gpio6", "gpio7";
>> 463 drive-strength = <2>;
536 464
537 /* Has external pullup */ !! 465 /* Has external pullup */
538 bias-disable; !! 466 bias-disable;
>> 467 };
539 }; 468 };
540 469
541 &qup_i2c9_default { 470 &qup_i2c9_default {
542 drive-strength = <2>; !! 471 pinconf {
543 !! 472 pins = "gpio46", "gpio47";
544 /* Has external pullup */ !! 473 drive-strength = <2>;
545 bias-disable; <<
546 }; <<
547 <<
548 &qup_uart3_cts { <<
549 /* <<
550 * Configure a pull-down on CTS to mat <<
551 * the Bluetooth module. <<
552 */ <<
553 bias-pull-down; <<
554 }; <<
555 474
556 &qup_uart3_rts { !! 475 /* Has external pullup */
557 /* We'll drive RTS, so no pull */ !! 476 bias-disable;
558 drive-strength = <2>; !! 477 };
559 bias-disable; <<
560 }; <<
561 <<
562 &qup_uart3_tx { <<
563 /* We'll drive TX, so no pull */ <<
564 drive-strength = <2>; <<
565 bias-disable; <<
566 }; 478 };
567 479
568 &qup_uart3_rx { !! 480 &qup_uart3_default {
569 /* !! 481 pinconf-cts {
570 * Configure a pull-up on RX. This is !! 482 /*
571 * garbage data when the TX pin of the !! 483 * Configure a pull-down on CTS to match the pull of
572 * in tri-state (module powered off or !! 484 * the Bluetooth module.
573 * signal yet). !! 485 */
574 */ !! 486 pins = "gpio38";
575 bias-pull-up; !! 487 bias-pull-down;
576 }; !! 488 };
577 489
578 &qup_uart8_tx { !! 490 pinconf-rts {
579 drive-strength = <2>; !! 491 /* We'll drive RTS, so no pull */
580 bias-disable; !! 492 pins = "gpio39";
581 }; !! 493 drive-strength = <2>;
>> 494 bias-disable;
>> 495 };
582 496
583 &qup_uart8_rx { !! 497 pinconf-tx {
584 drive-strength = <2>; !! 498 /* We'll drive TX, so no pull */
585 bias-pull-up; !! 499 pins = "gpio40";
586 }; !! 500 drive-strength = <2>;
>> 501 bias-disable;
>> 502 };
587 503
588 &qup_spi0_spi { !! 504 pinconf-rx {
589 drive-strength = <2>; !! 505 /*
590 bias-disable; !! 506 * Configure a pull-up on RX. This is needed to avoid
>> 507 * garbage data when the TX pin of the Bluetooth module is
>> 508 * in tri-state (module powered off or not driving the
>> 509 * signal yet).
>> 510 */
>> 511 pins = "gpio41";
>> 512 bias-pull-up;
>> 513 };
591 }; 514 };
592 515
593 &qup_spi0_cs { !! 516 &qup_uart8_default {
594 drive-strength = <2>; !! 517 pinconf-tx {
595 bias-disable; !! 518 pins = "gpio44";
596 }; !! 519 drive-strength = <2>;
>> 520 bias-disable;
>> 521 };
597 522
598 &qup_spi6_spi { !! 523 pinconf-rx {
599 drive-strength = <2>; !! 524 pins = "gpio45";
600 bias-disable; !! 525 drive-strength = <2>;
>> 526 bias-pull-up;
>> 527 };
601 }; 528 };
602 529
603 &qup_spi6_cs { !! 530 &qup_spi0_default {
604 drive-strength = <2>; !! 531 pinconf {
605 bias-disable; !! 532 pins = "gpio34", "gpio35", "gpio36", "gpio37";
>> 533 drive-strength = <2>;
>> 534 bias-disable;
>> 535 };
606 }; 536 };
607 537
608 &qup_spi10_spi { !! 538 &qup_spi6_default {
609 drive-strength = <2>; !! 539 pinconf {
610 bias-disable; !! 540 pins = "gpio59", "gpio60", "gpio61", "gpio62";
>> 541 drive-strength = <2>;
>> 542 bias-disable;
>> 543 };
611 }; 544 };
612 545
613 &qup_spi10_cs { !! 546 &qup_spi10_default {
614 drive-strength = <2>; !! 547 pinconf {
615 bias-disable; !! 548 pins = "gpio86", "gpio87", "gpio88", "gpio89";
>> 549 drive-strength = <2>;
>> 550 bias-disable;
>> 551 };
616 }; 552 };
617 553
618 &tlmm { 554 &tlmm {
619 qup_uart3_sleep: qup-uart3-sleep-state !! 555 qup_uart3_sleep: qup-uart3-sleep {
620 cts-pins { !! 556 pinmux {
>> 557 pins = "gpio38", "gpio39",
>> 558 "gpio40", "gpio41";
>> 559 function = "gpio";
>> 560 };
>> 561
>> 562 pinconf-cts {
621 /* 563 /*
622 * Configure a pull-do 564 * Configure a pull-down on CTS to match the pull of
623 * the Bluetooth modul 565 * the Bluetooth module.
624 */ 566 */
625 pins = "gpio38"; 567 pins = "gpio38";
626 function = "gpio"; <<
627 bias-pull-down; 568 bias-pull-down;
628 }; 569 };
629 570
630 rts-pins { !! 571 pinconf-rts {
631 /* 572 /*
632 * Configure pull-down 573 * Configure pull-down on RTS. As RTS is active low
633 * signal, pull it low 574 * signal, pull it low to indicate the BT SoC that it
634 * can wakeup the syst 575 * can wakeup the system anytime from suspend state by
635 * pulling RX low (by 576 * pulling RX low (by sending wakeup bytes).
636 */ 577 */
637 pins = "gpio39"; !! 578 pins = "gpio39";
638 function = "gpio"; !! 579 bias-pull-down;
639 bias-pull-down; <<
640 }; 580 };
641 581
642 tx-pins { !! 582 pinconf-tx {
643 /* 583 /*
644 * Configure pull-up o 584 * Configure pull-up on TX when it isn't actively driven
645 * to prevent BT SoC f 585 * to prevent BT SoC from receiving garbage during sleep.
646 */ 586 */
647 pins = "gpio40"; 587 pins = "gpio40";
648 function = "gpio"; <<
649 bias-pull-up; 588 bias-pull-up;
650 }; 589 };
651 590
652 rx-pins { !! 591 pinconf-rx {
653 /* 592 /*
654 * Configure a pull-up 593 * Configure a pull-up on RX. This is needed to avoid
655 * garbage data when t 594 * garbage data when the TX pin of the Bluetooth module
656 * is floating which m 595 * is floating which may cause spurious wakeups.
657 */ 596 */
658 pins = "gpio41"; 597 pins = "gpio41";
659 function = "gpio"; <<
660 bias-pull-up; <<
661 }; <<
662 }; <<
663 <<
664 sdc1_on: sdc1-on-state { <<
665 clk-pins { <<
666 pins = "sdc1_clk"; <<
667 bias-disable; <<
668 drive-strength = <16>; <<
669 }; <<
670 <<
671 cmd-pins { <<
672 pins = "sdc1_cmd"; <<
673 bias-pull-up; <<
674 drive-strength = <10>; <<
675 }; <<
676 <<
677 data-pins { <<
678 pins = "sdc1_data"; <<
679 bias-pull-up; <<
680 drive-strength = <10>; <<
681 }; <<
682 <<
683 rclk-pins { <<
684 pins = "sdc1_rclk"; <<
685 bias-pull-down; <<
686 }; <<
687 }; <<
688 <<
689 sdc1_off: sdc1-off-state { <<
690 clk-pins { <<
691 pins = "sdc1_clk"; <<
692 bias-disable; <<
693 drive-strength = <2>; <<
694 }; <<
695 <<
696 cmd-pins { <<
697 pins = "sdc1_cmd"; <<
698 bias-pull-up; <<
699 drive-strength = <2>; <<
700 }; <<
701 <<
702 data-pins { <<
703 pins = "sdc1_data"; <<
704 bias-pull-up; <<
705 drive-strength = <2>; <<
706 }; <<
707 <<
708 rclk-pins { <<
709 pins = "sdc1_rclk"; <<
710 bias-pull-down; <<
711 }; <<
712 }; <<
713 <<
714 sdc2_on: sdc2-on-state { <<
715 clk-pins { <<
716 pins = "sdc2_clk"; <<
717 bias-disable; <<
718 drive-strength = <16>; <<
719 }; <<
720 <<
721 cmd-pins { <<
722 pins = "sdc2_cmd"; <<
723 bias-pull-up; <<
724 drive-strength = <10>; <<
725 }; <<
726 <<
727 data-pins { <<
728 pins = "sdc2_data"; <<
729 bias-pull-up; <<
730 drive-strength = <10>; <<
731 }; <<
732 <<
733 sd-cd-pins { <<
734 pins = "gpio69"; <<
735 function = "gpio"; <<
736 bias-pull-up; <<
737 drive-strength = <2>; <<
738 }; <<
739 }; <<
740 <<
741 sdc2_off: sdc2-off-state { <<
742 clk-pins { <<
743 pins = "sdc2_clk"; <<
744 bias-disable; <<
745 drive-strength = <2>; <<
746 }; <<
747 <<
748 cmd-pins { <<
749 pins = "sdc2_cmd"; <<
750 bias-pull-up; <<
751 drive-strength = <2>; <<
752 }; <<
753 <<
754 data-pins { <<
755 pins = "sdc2_data"; <<
756 bias-pull-up; <<
757 drive-strength = <2>; <<
758 }; <<
759 <<
760 sd-cd-pins { <<
761 pins = "gpio69"; <<
762 function = "gpio"; <<
763 bias-pull-up; 598 bias-pull-up;
764 drive-strength = <2>; <<
765 }; 599 };
766 }; 600 };
767 }; 601 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.