1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * SC7180 IDP board device tree source 3 * SC7180 IDP board device tree source
4 * 4 *
5 * Copyright (c) 2019, The Linux Foundation. A 5 * Copyright (c) 2019, The Linux Foundation. All rights reserved.
6 */ 6 */
7 7
8 /dts-v1/; 8 /dts-v1/;
9 9
10 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regu 11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
13 #include "sc7180.dtsi" 13 #include "sc7180.dtsi"
14 #include "sc7180-firmware-tfa.dtsi" <<
15 #include "pm6150.dtsi" 14 #include "pm6150.dtsi"
16 #include "pm6150l.dtsi" 15 #include "pm6150l.dtsi"
17 16
18 / { 17 / {
19 model = "Qualcomm Technologies, Inc. S 18 model = "Qualcomm Technologies, Inc. SC7180 IDP";
20 compatible = "qcom,sc7180-idp", "qcom, 19 compatible = "qcom,sc7180-idp", "qcom,sc7180";
21 20
22 aliases { 21 aliases {
23 bluetooth0 = &bluetooth; 22 bluetooth0 = &bluetooth;
24 hsuart0 = &uart3; 23 hsuart0 = &uart3;
25 serial0 = &uart8; 24 serial0 = &uart8;
26 wifi0 = &wifi; 25 wifi0 = &wifi;
27 }; 26 };
28 27
29 chosen { 28 chosen {
30 stdout-path = "serial0:115200n 29 stdout-path = "serial0:115200n8";
31 }; 30 };
32 }; 31 };
33 32
34 /* 33 /*
35 * Reserved memory changes 34 * Reserved memory changes
36 * 35 *
37 * Delete all unused memory nodes and define t 36 * Delete all unused memory nodes and define the peripheral memory regions
38 * required by the board dts. 37 * required by the board dts.
39 * 38 *
40 */ 39 */
41 40
42 /delete-node/ &hyp_mem; 41 /delete-node/ &hyp_mem;
43 /delete-node/ &xbl_mem; 42 /delete-node/ &xbl_mem;
44 /delete-node/ &aop_mem; 43 /delete-node/ &aop_mem;
45 /delete-node/ &sec_apps_mem; 44 /delete-node/ &sec_apps_mem;
46 /delete-node/ &tz_mem; 45 /delete-node/ &tz_mem;
47 46
48 /* Increase the size from 2MB to 8MB */ 47 /* Increase the size from 2MB to 8MB */
49 &rmtfs_mem { 48 &rmtfs_mem {
50 reg = <0x0 0x94600000 0x0 0x800000>; 49 reg = <0x0 0x94600000 0x0 0x800000>;
51 }; 50 };
52 51
53 / { 52 / {
54 reserved-memory { 53 reserved-memory {
55 atf_mem: memory@80b00000 { 54 atf_mem: memory@80b00000 {
56 reg = <0x0 0x80b00000 55 reg = <0x0 0x80b00000 0x0 0x100000>;
57 no-map; 56 no-map;
58 }; 57 };
59 58
60 mpss_mem: memory@86000000 { 59 mpss_mem: memory@86000000 {
61 reg = <0x0 0x86000000 60 reg = <0x0 0x86000000 0x0 0x8c00000>;
62 no-map; 61 no-map;
63 }; 62 };
64 63
65 camera_mem: memory@8ec00000 { 64 camera_mem: memory@8ec00000 {
66 reg = <0x0 0x8ec00000 65 reg = <0x0 0x8ec00000 0x0 0x500000>;
67 no-map; 66 no-map;
68 }; 67 };
69 68
70 venus_mem: memory@8f600000 { 69 venus_mem: memory@8f600000 {
71 reg = <0 0x8f600000 0 70 reg = <0 0x8f600000 0 0x500000>;
72 no-map; 71 no-map;
73 }; 72 };
74 73
75 wlan_mem: memory@94100000 { 74 wlan_mem: memory@94100000 {
76 reg = <0x0 0x94100000 75 reg = <0x0 0x94100000 0x0 0x200000>;
77 no-map; 76 no-map;
78 }; 77 };
79 78
80 mba_mem: memory@94400000 { 79 mba_mem: memory@94400000 {
81 reg = <0x0 0x94400000 80 reg = <0x0 0x94400000 0x0 0x200000>;
82 no-map; 81 no-map;
83 }; 82 };
84 <<
85 mdata_mem: mpss-metadata { <<
86 alloc-ranges = <0x0 0x <<
87 size = <0x0 0x4000>; <<
88 no-map; <<
89 }; <<
90 }; 83 };
91 }; 84 };
92 85
93 &apps_rsc { 86 &apps_rsc {
94 regulators-0 { !! 87 pm6150-rpmh-regulators {
95 compatible = "qcom,pm6150-rpmh 88 compatible = "qcom,pm6150-rpmh-regulators";
96 qcom,pmic-id = "a"; 89 qcom,pmic-id = "a";
97 90
98 vreg_s1a_1p1: smps1 { 91 vreg_s1a_1p1: smps1 {
99 regulator-min-microvol 92 regulator-min-microvolt = <1128000>;
100 regulator-max-microvol 93 regulator-max-microvolt = <1128000>;
101 }; 94 };
102 95
103 vreg_s4a_1p0: smps4 { 96 vreg_s4a_1p0: smps4 {
104 regulator-min-microvol 97 regulator-min-microvolt = <824000>;
105 regulator-max-microvol 98 regulator-max-microvolt = <1120000>;
106 }; 99 };
107 100
108 vreg_s5a_2p0: smps5 { 101 vreg_s5a_2p0: smps5 {
109 regulator-min-microvol 102 regulator-min-microvolt = <1744000>;
110 regulator-max-microvol 103 regulator-max-microvolt = <2040000>;
111 }; 104 };
112 105
113 vreg_l1a_1p2: ldo1 { 106 vreg_l1a_1p2: ldo1 {
114 regulator-min-microvol 107 regulator-min-microvolt = <1178000>;
115 regulator-max-microvol 108 regulator-max-microvolt = <1256000>;
116 regulator-initial-mode 109 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
117 }; 110 };
118 111
119 vreg_l2a_1p0: ldo2 { 112 vreg_l2a_1p0: ldo2 {
120 regulator-min-microvol 113 regulator-min-microvolt = <944000>;
121 regulator-max-microvol 114 regulator-max-microvolt = <1056000>;
122 regulator-initial-mode 115 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
123 }; 116 };
124 117
125 vreg_l3a_1p0: ldo3 { 118 vreg_l3a_1p0: ldo3 {
126 regulator-min-microvol 119 regulator-min-microvolt = <968000>;
127 regulator-max-microvol 120 regulator-max-microvolt = <1064000>;
128 regulator-initial-mode 121 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
129 }; 122 };
130 123
131 vreg_l4a_0p8: ldo4 { 124 vreg_l4a_0p8: ldo4 {
132 regulator-min-microvol 125 regulator-min-microvolt = <824000>;
133 regulator-max-microvol 126 regulator-max-microvolt = <928000>;
134 regulator-initial-mode 127 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
135 }; 128 };
136 129
137 vreg_l5a_2p7: ldo5 { 130 vreg_l5a_2p7: ldo5 {
138 regulator-min-microvol 131 regulator-min-microvolt = <2496000>;
139 regulator-max-microvol 132 regulator-max-microvolt = <3000000>;
140 regulator-initial-mode 133 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
141 }; 134 };
142 135
143 vreg_l6a_0p6: ldo6 { 136 vreg_l6a_0p6: ldo6 {
144 regulator-min-microvol 137 regulator-min-microvolt = <568000>;
145 regulator-max-microvol 138 regulator-max-microvolt = <648000>;
146 regulator-initial-mode 139 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
147 }; 140 };
148 141
149 vreg_l9a_0p6: ldo9 { 142 vreg_l9a_0p6: ldo9 {
150 regulator-min-microvol 143 regulator-min-microvolt = <488000>;
151 regulator-max-microvol 144 regulator-max-microvolt = <800000>;
152 regulator-initial-mode 145 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
153 }; 146 };
154 147
155 vreg_l10a_1p8: ldo10 { 148 vreg_l10a_1p8: ldo10 {
156 regulator-min-microvol 149 regulator-min-microvolt = <1800000>;
157 regulator-max-microvol 150 regulator-max-microvolt = <1832000>;
158 regulator-initial-mode 151 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
159 }; 152 };
160 153
161 vreg_l11a_1p8: ldo11 { 154 vreg_l11a_1p8: ldo11 {
162 regulator-min-microvol 155 regulator-min-microvolt = <1696000>;
163 regulator-max-microvol 156 regulator-max-microvolt = <1904000>;
164 regulator-initial-mode 157 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
165 }; 158 };
166 159
167 vreg_l12a_1p8: ldo12 { 160 vreg_l12a_1p8: ldo12 {
168 regulator-min-microvol 161 regulator-min-microvolt = <1800000>;
169 regulator-max-microvol 162 regulator-max-microvolt = <1800000>;
170 regulator-initial-mode 163 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
171 }; 164 };
172 165
173 vreg_l13a_1p8: ldo13 { 166 vreg_l13a_1p8: ldo13 {
174 regulator-min-microvol 167 regulator-min-microvolt = <1696000>;
175 regulator-max-microvol 168 regulator-max-microvolt = <1904000>;
176 regulator-initial-mode 169 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
177 }; 170 };
178 171
179 vreg_l14a_1p8: ldo14 { 172 vreg_l14a_1p8: ldo14 {
180 regulator-min-microvol 173 regulator-min-microvolt = <1728000>;
181 regulator-max-microvol 174 regulator-max-microvolt = <1832000>;
182 regulator-initial-mode 175 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
183 }; 176 };
184 177
185 vreg_l15a_1p8: ldo15 { 178 vreg_l15a_1p8: ldo15 {
186 regulator-min-microvol 179 regulator-min-microvolt = <1696000>;
187 regulator-max-microvol 180 regulator-max-microvolt = <1904000>;
188 regulator-initial-mode 181 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
189 }; 182 };
190 183
191 vreg_l16a_2p7: ldo16 { 184 vreg_l16a_2p7: ldo16 {
192 regulator-min-microvol 185 regulator-min-microvolt = <2496000>;
193 regulator-max-microvol 186 regulator-max-microvolt = <3304000>;
194 regulator-initial-mode 187 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
195 }; 188 };
196 189
197 vreg_l17a_3p0: ldo17 { 190 vreg_l17a_3p0: ldo17 {
198 regulator-min-microvol 191 regulator-min-microvolt = <2920000>;
199 regulator-max-microvol 192 regulator-max-microvolt = <3232000>;
200 regulator-initial-mode 193 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
201 }; 194 };
202 195
203 vreg_l18a_2p8: ldo18 { 196 vreg_l18a_2p8: ldo18 {
204 regulator-min-microvol 197 regulator-min-microvolt = <2496000>;
205 regulator-max-microvol 198 regulator-max-microvolt = <3304000>;
206 regulator-initial-mode 199 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
207 }; 200 };
208 201
209 vreg_l19a_2p9: ldo19 { 202 vreg_l19a_2p9: ldo19 {
210 regulator-min-microvol 203 regulator-min-microvolt = <2960000>;
211 regulator-max-microvol 204 regulator-max-microvolt = <2960000>;
212 regulator-initial-mode 205 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
213 }; 206 };
214 }; 207 };
215 208
216 regulators-1 { !! 209 pm6150l-rpmh-regulators {
217 compatible = "qcom,pm6150l-rpm 210 compatible = "qcom,pm6150l-rpmh-regulators";
218 qcom,pmic-id = "c"; 211 qcom,pmic-id = "c";
219 212
220 vreg_s8c_1p3: smps8 { 213 vreg_s8c_1p3: smps8 {
221 regulator-min-microvol 214 regulator-min-microvolt = <1120000>;
222 regulator-max-microvol 215 regulator-max-microvolt = <1408000>;
223 }; 216 };
224 217
225 vreg_l1c_1p8: ldo1 { 218 vreg_l1c_1p8: ldo1 {
226 regulator-min-microvol 219 regulator-min-microvolt = <1616000>;
227 regulator-max-microvol 220 regulator-max-microvolt = <1984000>;
228 regulator-initial-mode 221 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
229 }; 222 };
230 223
231 vreg_l2c_1p3: ldo2 { 224 vreg_l2c_1p3: ldo2 {
232 regulator-min-microvol 225 regulator-min-microvolt = <1168000>;
233 regulator-max-microvol 226 regulator-max-microvolt = <1304000>;
234 regulator-initial-mode 227 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
235 }; 228 };
236 229
237 vreg_l3c_1p2: ldo3 { 230 vreg_l3c_1p2: ldo3 {
238 regulator-min-microvol 231 regulator-min-microvolt = <1144000>;
239 regulator-max-microvol 232 regulator-max-microvolt = <1304000>;
240 regulator-initial-mode 233 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
241 }; 234 };
242 235
243 vreg_l4c_1p8: ldo4 { 236 vreg_l4c_1p8: ldo4 {
244 regulator-min-microvol 237 regulator-min-microvolt = <1648000>;
245 regulator-max-microvol 238 regulator-max-microvolt = <3304000>;
246 regulator-initial-mode 239 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
247 }; 240 };
248 241
249 vreg_l5c_1p8: ldo5 { 242 vreg_l5c_1p8: ldo5 {
250 regulator-min-microvol 243 regulator-min-microvolt = <1648000>;
251 regulator-max-microvol 244 regulator-max-microvolt = <3304000>;
252 regulator-initial-mode 245 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
253 }; 246 };
254 247
255 vreg_l6c_2p9: ldo6 { 248 vreg_l6c_2p9: ldo6 {
256 regulator-min-microvol 249 regulator-min-microvolt = <1800000>;
257 regulator-max-microvol 250 regulator-max-microvolt = <2950000>;
258 regulator-initial-mode 251 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
259 }; 252 };
260 253
261 vreg_l7c_3p0: ldo7 { 254 vreg_l7c_3p0: ldo7 {
262 regulator-min-microvol 255 regulator-min-microvolt = <3000000>;
263 regulator-max-microvol 256 regulator-max-microvolt = <3312000>;
264 regulator-initial-mode 257 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
265 }; 258 };
266 259
267 vreg_l8c_1p8: ldo8 { 260 vreg_l8c_1p8: ldo8 {
268 regulator-min-microvol 261 regulator-min-microvolt = <1800000>;
269 regulator-max-microvol 262 regulator-max-microvolt = <1904000>;
270 regulator-initial-mode 263 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
271 }; 264 };
272 265
273 vreg_l9c_2p9: ldo9 { 266 vreg_l9c_2p9: ldo9 {
274 regulator-min-microvol 267 regulator-min-microvolt = <2960000>;
275 regulator-max-microvol 268 regulator-max-microvolt = <2960000>;
276 regulator-initial-mode 269 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
277 }; 270 };
278 271
279 vreg_l10c_3p3: ldo10 { 272 vreg_l10c_3p3: ldo10 {
280 regulator-min-microvol 273 regulator-min-microvolt = <3000000>;
281 regulator-max-microvol 274 regulator-max-microvolt = <3400000>;
282 regulator-initial-mode 275 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
283 }; 276 };
284 277
285 vreg_l11c_3p3: ldo11 { 278 vreg_l11c_3p3: ldo11 {
286 regulator-min-microvol 279 regulator-min-microvolt = <3000000>;
287 regulator-max-microvol 280 regulator-max-microvolt = <3400000>;
288 regulator-initial-mode 281 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
289 }; 282 };
290 283
291 vreg_bob: bob { 284 vreg_bob: bob {
292 regulator-min-microvol 285 regulator-min-microvolt = <3008000>;
293 regulator-max-microvol 286 regulator-max-microvolt = <3960000>;
294 regulator-initial-mode 287 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
295 }; 288 };
296 }; 289 };
297 }; 290 };
298 291
299 &mdss { !! 292 &dsi0 {
300 status = "okay"; <<
301 }; <<
302 <<
303 &mdss_dsi0 { <<
304 status = "okay"; 293 status = "okay";
305 294
306 vdda-supply = <&vreg_l3c_1p2>; 295 vdda-supply = <&vreg_l3c_1p2>;
307 296
308 panel@0 { 297 panel@0 {
309 compatible = "visionox,rm69299 298 compatible = "visionox,rm69299-1080p-display";
310 reg = <0>; 299 reg = <0>;
311 300
312 vdda-supply = <&vreg_l8c_1p8>; 301 vdda-supply = <&vreg_l8c_1p8>;
313 vdd3p3-supply = <&vreg_l18a_2p 302 vdd3p3-supply = <&vreg_l18a_2p8>;
314 303
315 pinctrl-names = "default"; 304 pinctrl-names = "default";
316 pinctrl-0 = <&disp_pins>; 305 pinctrl-0 = <&disp_pins>;
317 306
318 reset-gpios = <&pm6150l_gpios !! 307 reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>;
319 308
320 port { !! 309 ports {
321 panel0_in: endpoint { !! 310 #address-cells = <1>;
322 remote-endpoin !! 311 #size-cells = <0>;
>> 312 port@0 {
>> 313 reg = <0>;
>> 314 panel0_in: endpoint {
>> 315 remote-endpoint = <&dsi0_out>;
>> 316 };
323 }; 317 };
324 }; 318 };
325 }; 319 };
326 320
327 ports { 321 ports {
328 port@1 { 322 port@1 {
329 endpoint { 323 endpoint {
330 remote-endpoin 324 remote-endpoint = <&panel0_in>;
331 data-lanes = < 325 data-lanes = <0 1 2 3>;
332 }; 326 };
333 }; 327 };
334 }; 328 };
335 }; 329 };
336 330
337 &mdss_dsi0_phy { !! 331 &dsi_phy {
338 status = "okay"; 332 status = "okay";
339 vdds-supply = <&vreg_l4a_0p8>; 333 vdds-supply = <&vreg_l4a_0p8>;
340 }; 334 };
341 335
>> 336 &mdp {
>> 337 status = "okay";
>> 338 };
>> 339
>> 340 &mdss {
>> 341 status = "okay";
>> 342 };
>> 343
342 &qfprom { 344 &qfprom {
343 vcc-supply = <&vreg_l11a_1p8>; 345 vcc-supply = <&vreg_l11a_1p8>;
344 }; 346 };
345 347
346 &qspi { 348 &qspi {
347 status = "okay"; 349 status = "okay";
348 pinctrl-names = "default"; 350 pinctrl-names = "default";
349 pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, !! 351 pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
350 352
351 flash@0 { 353 flash@0 {
352 compatible = "jedec,spi-nor"; 354 compatible = "jedec,spi-nor";
353 reg = <0>; 355 reg = <0>;
354 spi-max-frequency = <25000000> 356 spi-max-frequency = <25000000>;
355 spi-tx-bus-width = <2>; 357 spi-tx-bus-width = <2>;
356 spi-rx-bus-width = <2>; 358 spi-rx-bus-width = <2>;
357 }; 359 };
358 }; 360 };
359 361
360 &qupv3_id_0 { 362 &qupv3_id_0 {
361 status = "okay"; 363 status = "okay";
362 }; 364 };
363 365
364 &qupv3_id_1 { 366 &qupv3_id_1 {
365 status = "okay"; 367 status = "okay";
366 }; 368 };
367 369
368 &remoteproc_mpss { 370 &remoteproc_mpss {
369 status = "okay"; 371 status = "okay";
370 compatible = "qcom,sc7180-mss-pil"; 372 compatible = "qcom,sc7180-mss-pil";
371 reg = <0 0x04080000 0 0x4040>, <0 0x04 <<
372 reg-names = "qdsp6", "rmb"; <<
373 <<
374 clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, <<
375 <&gcc GCC_MSS_Q6_MEMNOC_AXI_C <<
376 <&gcc GCC_MSS_NAV_AXI_CLK>, <<
377 <&gcc GCC_MSS_SNOC_AXI_CLK>, <<
378 <&gcc GCC_MSS_MFAB_AXIS_CLK>, <<
379 <&rpmhcc RPMH_CXO_CLK>; <<
380 clock-names = "iface", "bus", "nav", " <<
381 <<
382 iommus = <&apps_smmu 0x461 0x0>, <&app 373 iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
383 memory-region = <&mba_mem>, <&mpss_mem !! 374 memory-region = <&mba_mem &mpss_mem>;
384 <<
385 resets = <&aoss_reset AOSS_CC_MSS_REST <<
386 <&pdc_reset PDC_MODEM_SYNC_RE <<
387 reset-names = "mss_restart", "pdc_rese <<
388 <<
389 qcom,halt-regs = <&tcsr_regs_1 0x3000 <<
390 qcom,spare-regs = <&tcsr_regs_2 0xb3e4 <<
391 }; <<
392 <<
393 &scm { <<
394 /* TF-A firmware maps memory cached so <<
395 dma-coherent; <<
396 }; 375 };
397 376
398 &sdhc_1 { 377 &sdhc_1 {
399 status = "okay"; 378 status = "okay";
400 379
401 pinctrl-names = "default", "sleep"; 380 pinctrl-names = "default", "sleep";
402 pinctrl-0 = <&sdc1_on>; 381 pinctrl-0 = <&sdc1_on>;
403 pinctrl-1 = <&sdc1_off>; 382 pinctrl-1 = <&sdc1_off>;
404 vmmc-supply = <&vreg_l19a_2p9>; 383 vmmc-supply = <&vreg_l19a_2p9>;
405 vqmmc-supply = <&vreg_l12a_1p8>; 384 vqmmc-supply = <&vreg_l12a_1p8>;
406 }; 385 };
407 386
408 &sdhc_2 { 387 &sdhc_2 {
409 status = "okay"; 388 status = "okay";
410 389
411 pinctrl-names = "default","sleep"; 390 pinctrl-names = "default","sleep";
412 pinctrl-0 = <&sdc2_on>; 391 pinctrl-0 = <&sdc2_on>;
413 pinctrl-1 = <&sdc2_off>; 392 pinctrl-1 = <&sdc2_off>;
414 vmmc-supply = <&vreg_l9c_2p9>; 393 vmmc-supply = <&vreg_l9c_2p9>;
415 vqmmc-supply = <&vreg_l6c_2p9>; 394 vqmmc-supply = <&vreg_l6c_2p9>;
416 395
417 cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; 396 cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
418 }; 397 };
419 398
420 &uart3 { 399 &uart3 {
421 status = "okay"; 400 status = "okay";
422 401
423 /delete-property/interrupts; 402 /delete-property/interrupts;
424 interrupts-extended = <&intc GIC_SPI 6 403 interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
425 <&tlmm 41 IRQ_ 404 <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
426 405
427 pinctrl-names = "default", "sleep"; 406 pinctrl-names = "default", "sleep";
428 pinctrl-1 = <&qup_uart3_sleep>; 407 pinctrl-1 = <&qup_uart3_sleep>;
429 408
430 bluetooth: bluetooth { !! 409 bluetooth: wcn3990-bt {
431 compatible = "qcom,wcn3990-bt" 410 compatible = "qcom,wcn3990-bt";
432 vddio-supply = <&vreg_l10a_1p8 411 vddio-supply = <&vreg_l10a_1p8>;
433 vddxo-supply = <&vreg_l1c_1p8> 412 vddxo-supply = <&vreg_l1c_1p8>;
434 vddrf-supply = <&vreg_l2c_1p3> 413 vddrf-supply = <&vreg_l2c_1p3>;
435 vddch0-supply = <&vreg_l10c_3p 414 vddch0-supply = <&vreg_l10c_3p3>;
436 max-speed = <3200000>; 415 max-speed = <3200000>;
437 }; 416 };
438 }; 417 };
439 418
440 &uart8 { 419 &uart8 {
441 status = "okay"; 420 status = "okay";
442 }; 421 };
443 422
444 &usb_1 { 423 &usb_1 {
445 status = "okay"; 424 status = "okay";
446 }; 425 };
447 426
448 &usb_1_dwc3 { 427 &usb_1_dwc3 {
449 dr_mode = "host"; 428 dr_mode = "host";
450 }; 429 };
451 430
452 &usb_1_hsphy { 431 &usb_1_hsphy {
453 status = "okay"; 432 status = "okay";
454 vdd-supply = <&vreg_l4a_0p8>; 433 vdd-supply = <&vreg_l4a_0p8>;
455 vdda-pll-supply = <&vreg_l11a_1p8>; 434 vdda-pll-supply = <&vreg_l11a_1p8>;
456 vdda-phy-dpdm-supply = <&vreg_l17a_3p0 435 vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
457 qcom,imp-res-offset-value = <8>; 436 qcom,imp-res-offset-value = <8>;
458 qcom,preemphasis-level = <QUSB2_V2_PRE 437 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
459 qcom,preemphasis-width = <QUSB2_V2_PRE 438 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
460 qcom,bias-ctrl-value = <0x22>; 439 qcom,bias-ctrl-value = <0x22>;
461 qcom,charge-ctrl-value = <3>; 440 qcom,charge-ctrl-value = <3>;
462 qcom,hsdisc-trim-value = <0>; 441 qcom,hsdisc-trim-value = <0>;
463 }; 442 };
464 443
465 &usb_1_qmpphy { 444 &usb_1_qmpphy {
466 status = "okay"; 445 status = "okay";
467 vdda-phy-supply = <&vreg_l3c_1p2>; 446 vdda-phy-supply = <&vreg_l3c_1p2>;
468 vdda-pll-supply = <&vreg_l4a_0p8>; 447 vdda-pll-supply = <&vreg_l4a_0p8>;
469 }; 448 };
470 449
471 &venus { 450 &venus {
472 video-firmware { 451 video-firmware {
473 iommus = <&apps_smmu 0x0c42 0x 452 iommus = <&apps_smmu 0x0c42 0x0>;
474 }; 453 };
475 }; 454 };
476 455
477 &wifi { 456 &wifi {
478 status = "okay"; 457 status = "okay";
479 vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6> 458 vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
480 vdd-1.8-xo-supply = <&vreg_l1c_1p8>; 459 vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
481 vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; 460 vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
482 vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; 461 vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
483 vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; 462 vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
484 wifi-firmware { 463 wifi-firmware {
485 iommus = <&apps_smmu 0xc2 0x1> 464 iommus = <&apps_smmu 0xc2 0x1>;
486 }; 465 };
487 }; 466 };
488 467
489 /* PINCTRL - additions to nodes defined in sc7 468 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
490 469
491 &pm6150l_gpios { !! 470 &pm6150l_gpio {
492 disp_pins: disp-state { 471 disp_pins: disp-state {
493 pinconf { 472 pinconf {
494 pins = "gpio3"; 473 pins = "gpio3";
495 function = PMIC_GPIO_F 474 function = PMIC_GPIO_FUNC_FUNC1;
496 qcom,drive-strength = 475 qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
497 power-source = <0>; 476 power-source = <0>;
498 bias-disable; 477 bias-disable;
499 output-low; 478 output-low;
500 }; 479 };
501 }; 480 };
502 }; 481 };
503 482
504 &qspi_clk { 483 &qspi_clk {
505 bias-disable; 484 bias-disable;
506 }; 485 };
507 486
508 &qspi_cs0 { 487 &qspi_cs0 {
509 bias-disable; 488 bias-disable;
510 }; 489 };
511 490
512 &qspi_data0 { !! 491 &qspi_data01 {
513 bias-pull-up; !! 492 /* High-Z when no transfers; nice to park the lines */
514 }; <<
515 <<
516 &qspi_data1 { <<
517 bias-pull-up; 493 bias-pull-up;
518 }; 494 };
519 495
520 &qup_i2c2_default { 496 &qup_i2c2_default {
521 drive-strength = <2>; 497 drive-strength = <2>;
522 498
523 /* Has external pullup */ 499 /* Has external pullup */
524 bias-disable; 500 bias-disable;
525 }; 501 };
526 502
527 &qup_i2c4_default { 503 &qup_i2c4_default {
528 drive-strength = <2>; 504 drive-strength = <2>;
529 505
530 /* Has external pullup */ 506 /* Has external pullup */
531 bias-disable; 507 bias-disable;
532 }; 508 };
533 509
534 &qup_i2c7_default { 510 &qup_i2c7_default {
535 drive-strength = <2>; 511 drive-strength = <2>;
536 512
537 /* Has external pullup */ 513 /* Has external pullup */
538 bias-disable; 514 bias-disable;
539 }; 515 };
540 516
541 &qup_i2c9_default { 517 &qup_i2c9_default {
542 drive-strength = <2>; 518 drive-strength = <2>;
543 519
544 /* Has external pullup */ 520 /* Has external pullup */
545 bias-disable; 521 bias-disable;
546 }; 522 };
547 523
548 &qup_uart3_cts { 524 &qup_uart3_cts {
549 /* 525 /*
550 * Configure a pull-down on CTS to mat 526 * Configure a pull-down on CTS to match the pull of
551 * the Bluetooth module. 527 * the Bluetooth module.
552 */ 528 */
553 bias-pull-down; 529 bias-pull-down;
554 }; 530 };
555 531
556 &qup_uart3_rts { 532 &qup_uart3_rts {
557 /* We'll drive RTS, so no pull */ 533 /* We'll drive RTS, so no pull */
558 drive-strength = <2>; 534 drive-strength = <2>;
559 bias-disable; 535 bias-disable;
560 }; 536 };
561 537
562 &qup_uart3_tx { 538 &qup_uart3_tx {
563 /* We'll drive TX, so no pull */ 539 /* We'll drive TX, so no pull */
564 drive-strength = <2>; 540 drive-strength = <2>;
565 bias-disable; 541 bias-disable;
566 }; 542 };
567 543
568 &qup_uart3_rx { 544 &qup_uart3_rx {
569 /* 545 /*
570 * Configure a pull-up on RX. This is 546 * Configure a pull-up on RX. This is needed to avoid
571 * garbage data when the TX pin of the 547 * garbage data when the TX pin of the Bluetooth module is
572 * in tri-state (module powered off or 548 * in tri-state (module powered off or not driving the
573 * signal yet). 549 * signal yet).
574 */ 550 */
575 bias-pull-up; 551 bias-pull-up;
576 }; 552 };
577 553
578 &qup_uart8_tx { 554 &qup_uart8_tx {
579 drive-strength = <2>; 555 drive-strength = <2>;
580 bias-disable; 556 bias-disable;
581 }; 557 };
582 558
583 &qup_uart8_rx { 559 &qup_uart8_rx {
584 drive-strength = <2>; 560 drive-strength = <2>;
585 bias-pull-up; 561 bias-pull-up;
586 }; 562 };
587 563
588 &qup_spi0_spi { 564 &qup_spi0_spi {
589 drive-strength = <2>; 565 drive-strength = <2>;
590 bias-disable; 566 bias-disable;
591 }; 567 };
592 568
593 &qup_spi0_cs { 569 &qup_spi0_cs {
594 drive-strength = <2>; 570 drive-strength = <2>;
595 bias-disable; 571 bias-disable;
596 }; 572 };
597 573
598 &qup_spi6_spi { 574 &qup_spi6_spi {
599 drive-strength = <2>; 575 drive-strength = <2>;
600 bias-disable; 576 bias-disable;
601 }; 577 };
602 578
603 &qup_spi6_cs { 579 &qup_spi6_cs {
604 drive-strength = <2>; 580 drive-strength = <2>;
605 bias-disable; 581 bias-disable;
606 }; 582 };
607 583
608 &qup_spi10_spi { 584 &qup_spi10_spi {
609 drive-strength = <2>; 585 drive-strength = <2>;
610 bias-disable; 586 bias-disable;
611 }; 587 };
612 588
613 &qup_spi10_cs { 589 &qup_spi10_cs {
614 drive-strength = <2>; 590 drive-strength = <2>;
615 bias-disable; 591 bias-disable;
616 }; 592 };
617 593
618 &tlmm { 594 &tlmm {
619 qup_uart3_sleep: qup-uart3-sleep-state 595 qup_uart3_sleep: qup-uart3-sleep-state {
620 cts-pins { 596 cts-pins {
621 /* 597 /*
622 * Configure a pull-do 598 * Configure a pull-down on CTS to match the pull of
623 * the Bluetooth modul 599 * the Bluetooth module.
624 */ 600 */
625 pins = "gpio38"; 601 pins = "gpio38";
626 function = "gpio"; 602 function = "gpio";
627 bias-pull-down; 603 bias-pull-down;
628 }; 604 };
629 605
630 rts-pins { 606 rts-pins {
631 /* 607 /*
632 * Configure pull-down 608 * Configure pull-down on RTS. As RTS is active low
633 * signal, pull it low 609 * signal, pull it low to indicate the BT SoC that it
634 * can wakeup the syst 610 * can wakeup the system anytime from suspend state by
635 * pulling RX low (by 611 * pulling RX low (by sending wakeup bytes).
636 */ 612 */
637 pins = "gpio39"; 613 pins = "gpio39";
638 function = "gpio"; 614 function = "gpio";
639 bias-pull-down; 615 bias-pull-down;
640 }; 616 };
641 617
642 tx-pins { 618 tx-pins {
643 /* 619 /*
644 * Configure pull-up o 620 * Configure pull-up on TX when it isn't actively driven
645 * to prevent BT SoC f 621 * to prevent BT SoC from receiving garbage during sleep.
646 */ 622 */
647 pins = "gpio40"; 623 pins = "gpio40";
648 function = "gpio"; 624 function = "gpio";
649 bias-pull-up; 625 bias-pull-up;
650 }; 626 };
651 627
652 rx-pins { 628 rx-pins {
653 /* 629 /*
654 * Configure a pull-up 630 * Configure a pull-up on RX. This is needed to avoid
655 * garbage data when t 631 * garbage data when the TX pin of the Bluetooth module
656 * is floating which m 632 * is floating which may cause spurious wakeups.
657 */ 633 */
658 pins = "gpio41"; 634 pins = "gpio41";
659 function = "gpio"; 635 function = "gpio";
660 bias-pull-up; 636 bias-pull-up;
661 }; 637 };
662 }; 638 };
663 639
664 sdc1_on: sdc1-on-state { 640 sdc1_on: sdc1-on-state {
665 clk-pins { 641 clk-pins {
666 pins = "sdc1_clk"; 642 pins = "sdc1_clk";
667 bias-disable; 643 bias-disable;
668 drive-strength = <16>; 644 drive-strength = <16>;
669 }; 645 };
670 646
671 cmd-pins { 647 cmd-pins {
672 pins = "sdc1_cmd"; 648 pins = "sdc1_cmd";
673 bias-pull-up; 649 bias-pull-up;
674 drive-strength = <10>; 650 drive-strength = <10>;
675 }; 651 };
676 652
677 data-pins { 653 data-pins {
678 pins = "sdc1_data"; 654 pins = "sdc1_data";
679 bias-pull-up; 655 bias-pull-up;
680 drive-strength = <10>; 656 drive-strength = <10>;
681 }; 657 };
682 658
683 rclk-pins { 659 rclk-pins {
684 pins = "sdc1_rclk"; 660 pins = "sdc1_rclk";
685 bias-pull-down; 661 bias-pull-down;
686 }; 662 };
687 }; 663 };
688 664
689 sdc1_off: sdc1-off-state { 665 sdc1_off: sdc1-off-state {
690 clk-pins { 666 clk-pins {
691 pins = "sdc1_clk"; 667 pins = "sdc1_clk";
692 bias-disable; 668 bias-disable;
693 drive-strength = <2>; 669 drive-strength = <2>;
694 }; 670 };
695 671
696 cmd-pins { 672 cmd-pins {
697 pins = "sdc1_cmd"; 673 pins = "sdc1_cmd";
698 bias-pull-up; 674 bias-pull-up;
699 drive-strength = <2>; 675 drive-strength = <2>;
700 }; 676 };
701 677
702 data-pins { 678 data-pins {
703 pins = "sdc1_data"; 679 pins = "sdc1_data";
704 bias-pull-up; 680 bias-pull-up;
705 drive-strength = <2>; 681 drive-strength = <2>;
706 }; 682 };
707 683
708 rclk-pins { 684 rclk-pins {
709 pins = "sdc1_rclk"; 685 pins = "sdc1_rclk";
710 bias-pull-down; 686 bias-pull-down;
711 }; 687 };
712 }; 688 };
713 689
714 sdc2_on: sdc2-on-state { 690 sdc2_on: sdc2-on-state {
715 clk-pins { 691 clk-pins {
716 pins = "sdc2_clk"; 692 pins = "sdc2_clk";
717 bias-disable; 693 bias-disable;
718 drive-strength = <16>; 694 drive-strength = <16>;
719 }; 695 };
720 696
721 cmd-pins { 697 cmd-pins {
722 pins = "sdc2_cmd"; 698 pins = "sdc2_cmd";
723 bias-pull-up; 699 bias-pull-up;
724 drive-strength = <10>; 700 drive-strength = <10>;
725 }; 701 };
726 702
727 data-pins { 703 data-pins {
728 pins = "sdc2_data"; 704 pins = "sdc2_data";
729 bias-pull-up; 705 bias-pull-up;
730 drive-strength = <10>; 706 drive-strength = <10>;
731 }; 707 };
732 708
733 sd-cd-pins { 709 sd-cd-pins {
734 pins = "gpio69"; 710 pins = "gpio69";
735 function = "gpio"; 711 function = "gpio";
736 bias-pull-up; 712 bias-pull-up;
737 drive-strength = <2>; 713 drive-strength = <2>;
738 }; 714 };
739 }; 715 };
740 716
741 sdc2_off: sdc2-off-state { 717 sdc2_off: sdc2-off-state {
742 clk-pins { 718 clk-pins {
743 pins = "sdc2_clk"; 719 pins = "sdc2_clk";
744 bias-disable; 720 bias-disable;
745 drive-strength = <2>; 721 drive-strength = <2>;
746 }; 722 };
747 723
748 cmd-pins { 724 cmd-pins {
749 pins = "sdc2_cmd"; 725 pins = "sdc2_cmd";
750 bias-pull-up; 726 bias-pull-up;
751 drive-strength = <2>; 727 drive-strength = <2>;
752 }; 728 };
753 729
754 data-pins { 730 data-pins {
755 pins = "sdc2_data"; 731 pins = "sdc2_data";
756 bias-pull-up; 732 bias-pull-up;
757 drive-strength = <2>; 733 drive-strength = <2>;
758 }; 734 };
759 735
760 sd-cd-pins { 736 sd-cd-pins {
761 pins = "gpio69"; 737 pins = "gpio69";
762 function = "gpio"; 738 function = "gpio";
763 bias-pull-up; 739 bias-pull-up;
764 drive-strength = <2>; 740 drive-strength = <2>;
765 }; 741 };
766 }; 742 };
767 }; 743 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.