1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * SC7180 IDP board device tree source 3 * SC7180 IDP board device tree source
4 * 4 *
5 * Copyright (c) 2019, The Linux Foundation. A 5 * Copyright (c) 2019, The Linux Foundation. All rights reserved.
6 */ 6 */
7 7
8 /dts-v1/; 8 /dts-v1/;
9 9
10 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regu 11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
13 #include "sc7180.dtsi" 13 #include "sc7180.dtsi"
14 #include "sc7180-firmware-tfa.dtsi" <<
15 #include "pm6150.dtsi" 14 #include "pm6150.dtsi"
16 #include "pm6150l.dtsi" 15 #include "pm6150l.dtsi"
17 16
18 / { 17 / {
19 model = "Qualcomm Technologies, Inc. S 18 model = "Qualcomm Technologies, Inc. SC7180 IDP";
20 compatible = "qcom,sc7180-idp", "qcom, 19 compatible = "qcom,sc7180-idp", "qcom,sc7180";
21 20
22 aliases { 21 aliases {
23 bluetooth0 = &bluetooth; 22 bluetooth0 = &bluetooth;
24 hsuart0 = &uart3; 23 hsuart0 = &uart3;
25 serial0 = &uart8; 24 serial0 = &uart8;
26 wifi0 = &wifi; 25 wifi0 = &wifi;
27 }; 26 };
28 27
29 chosen { 28 chosen {
30 stdout-path = "serial0:115200n 29 stdout-path = "serial0:115200n8";
31 }; 30 };
32 }; 31 };
33 32
34 /* 33 /*
35 * Reserved memory changes 34 * Reserved memory changes
36 * 35 *
37 * Delete all unused memory nodes and define t 36 * Delete all unused memory nodes and define the peripheral memory regions
38 * required by the board dts. 37 * required by the board dts.
39 * 38 *
40 */ 39 */
41 40
42 /delete-node/ &hyp_mem; 41 /delete-node/ &hyp_mem;
43 /delete-node/ &xbl_mem; 42 /delete-node/ &xbl_mem;
44 /delete-node/ &aop_mem; 43 /delete-node/ &aop_mem;
45 /delete-node/ &sec_apps_mem; 44 /delete-node/ &sec_apps_mem;
46 /delete-node/ &tz_mem; 45 /delete-node/ &tz_mem;
47 46
48 /* Increase the size from 2MB to 8MB */ 47 /* Increase the size from 2MB to 8MB */
49 &rmtfs_mem { 48 &rmtfs_mem {
50 reg = <0x0 0x94600000 0x0 0x800000>; 49 reg = <0x0 0x94600000 0x0 0x800000>;
51 }; 50 };
52 51
53 / { 52 / {
54 reserved-memory { 53 reserved-memory {
55 atf_mem: memory@80b00000 { 54 atf_mem: memory@80b00000 {
56 reg = <0x0 0x80b00000 55 reg = <0x0 0x80b00000 0x0 0x100000>;
57 no-map; 56 no-map;
58 }; 57 };
59 58
60 mpss_mem: memory@86000000 { 59 mpss_mem: memory@86000000 {
61 reg = <0x0 0x86000000 60 reg = <0x0 0x86000000 0x0 0x8c00000>;
62 no-map; 61 no-map;
63 }; 62 };
64 63
65 camera_mem: memory@8ec00000 { 64 camera_mem: memory@8ec00000 {
66 reg = <0x0 0x8ec00000 65 reg = <0x0 0x8ec00000 0x0 0x500000>;
67 no-map; 66 no-map;
68 }; 67 };
69 68
70 venus_mem: memory@8f600000 { 69 venus_mem: memory@8f600000 {
71 reg = <0 0x8f600000 0 70 reg = <0 0x8f600000 0 0x500000>;
72 no-map; 71 no-map;
73 }; 72 };
74 73
75 wlan_mem: memory@94100000 { 74 wlan_mem: memory@94100000 {
76 reg = <0x0 0x94100000 75 reg = <0x0 0x94100000 0x0 0x200000>;
77 no-map; 76 no-map;
78 }; 77 };
79 78
80 mba_mem: memory@94400000 { 79 mba_mem: memory@94400000 {
81 reg = <0x0 0x94400000 80 reg = <0x0 0x94400000 0x0 0x200000>;
82 no-map; 81 no-map;
83 }; 82 };
84 83
85 mdata_mem: mpss-metadata { 84 mdata_mem: mpss-metadata {
86 alloc-ranges = <0x0 0x 85 alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
87 size = <0x0 0x4000>; 86 size = <0x0 0x4000>;
88 no-map; 87 no-map;
89 }; 88 };
90 }; 89 };
91 }; 90 };
92 91
93 &apps_rsc { 92 &apps_rsc {
94 regulators-0 { 93 regulators-0 {
95 compatible = "qcom,pm6150-rpmh 94 compatible = "qcom,pm6150-rpmh-regulators";
96 qcom,pmic-id = "a"; 95 qcom,pmic-id = "a";
97 96
98 vreg_s1a_1p1: smps1 { 97 vreg_s1a_1p1: smps1 {
99 regulator-min-microvol 98 regulator-min-microvolt = <1128000>;
100 regulator-max-microvol 99 regulator-max-microvolt = <1128000>;
101 }; 100 };
102 101
103 vreg_s4a_1p0: smps4 { 102 vreg_s4a_1p0: smps4 {
104 regulator-min-microvol 103 regulator-min-microvolt = <824000>;
105 regulator-max-microvol 104 regulator-max-microvolt = <1120000>;
106 }; 105 };
107 106
108 vreg_s5a_2p0: smps5 { 107 vreg_s5a_2p0: smps5 {
109 regulator-min-microvol 108 regulator-min-microvolt = <1744000>;
110 regulator-max-microvol 109 regulator-max-microvolt = <2040000>;
111 }; 110 };
112 111
113 vreg_l1a_1p2: ldo1 { 112 vreg_l1a_1p2: ldo1 {
114 regulator-min-microvol 113 regulator-min-microvolt = <1178000>;
115 regulator-max-microvol 114 regulator-max-microvolt = <1256000>;
116 regulator-initial-mode 115 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
117 }; 116 };
118 117
119 vreg_l2a_1p0: ldo2 { 118 vreg_l2a_1p0: ldo2 {
120 regulator-min-microvol 119 regulator-min-microvolt = <944000>;
121 regulator-max-microvol 120 regulator-max-microvolt = <1056000>;
122 regulator-initial-mode 121 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
123 }; 122 };
124 123
125 vreg_l3a_1p0: ldo3 { 124 vreg_l3a_1p0: ldo3 {
126 regulator-min-microvol 125 regulator-min-microvolt = <968000>;
127 regulator-max-microvol 126 regulator-max-microvolt = <1064000>;
128 regulator-initial-mode 127 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
129 }; 128 };
130 129
131 vreg_l4a_0p8: ldo4 { 130 vreg_l4a_0p8: ldo4 {
132 regulator-min-microvol 131 regulator-min-microvolt = <824000>;
133 regulator-max-microvol 132 regulator-max-microvolt = <928000>;
134 regulator-initial-mode 133 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
135 }; 134 };
136 135
137 vreg_l5a_2p7: ldo5 { 136 vreg_l5a_2p7: ldo5 {
138 regulator-min-microvol 137 regulator-min-microvolt = <2496000>;
139 regulator-max-microvol 138 regulator-max-microvolt = <3000000>;
140 regulator-initial-mode 139 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
141 }; 140 };
142 141
143 vreg_l6a_0p6: ldo6 { 142 vreg_l6a_0p6: ldo6 {
144 regulator-min-microvol 143 regulator-min-microvolt = <568000>;
145 regulator-max-microvol 144 regulator-max-microvolt = <648000>;
146 regulator-initial-mode 145 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
147 }; 146 };
148 147
149 vreg_l9a_0p6: ldo9 { 148 vreg_l9a_0p6: ldo9 {
150 regulator-min-microvol 149 regulator-min-microvolt = <488000>;
151 regulator-max-microvol 150 regulator-max-microvolt = <800000>;
152 regulator-initial-mode 151 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
153 }; 152 };
154 153
155 vreg_l10a_1p8: ldo10 { 154 vreg_l10a_1p8: ldo10 {
156 regulator-min-microvol 155 regulator-min-microvolt = <1800000>;
157 regulator-max-microvol 156 regulator-max-microvolt = <1832000>;
158 regulator-initial-mode 157 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
159 }; 158 };
160 159
161 vreg_l11a_1p8: ldo11 { 160 vreg_l11a_1p8: ldo11 {
162 regulator-min-microvol 161 regulator-min-microvolt = <1696000>;
163 regulator-max-microvol 162 regulator-max-microvolt = <1904000>;
164 regulator-initial-mode 163 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
165 }; 164 };
166 165
167 vreg_l12a_1p8: ldo12 { 166 vreg_l12a_1p8: ldo12 {
168 regulator-min-microvol 167 regulator-min-microvolt = <1800000>;
169 regulator-max-microvol 168 regulator-max-microvolt = <1800000>;
170 regulator-initial-mode 169 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
171 }; 170 };
172 171
173 vreg_l13a_1p8: ldo13 { 172 vreg_l13a_1p8: ldo13 {
174 regulator-min-microvol 173 regulator-min-microvolt = <1696000>;
175 regulator-max-microvol 174 regulator-max-microvolt = <1904000>;
176 regulator-initial-mode 175 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
177 }; 176 };
178 177
179 vreg_l14a_1p8: ldo14 { 178 vreg_l14a_1p8: ldo14 {
180 regulator-min-microvol 179 regulator-min-microvolt = <1728000>;
181 regulator-max-microvol 180 regulator-max-microvolt = <1832000>;
182 regulator-initial-mode 181 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
183 }; 182 };
184 183
185 vreg_l15a_1p8: ldo15 { 184 vreg_l15a_1p8: ldo15 {
186 regulator-min-microvol 185 regulator-min-microvolt = <1696000>;
187 regulator-max-microvol 186 regulator-max-microvolt = <1904000>;
188 regulator-initial-mode 187 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
189 }; 188 };
190 189
191 vreg_l16a_2p7: ldo16 { 190 vreg_l16a_2p7: ldo16 {
192 regulator-min-microvol 191 regulator-min-microvolt = <2496000>;
193 regulator-max-microvol 192 regulator-max-microvolt = <3304000>;
194 regulator-initial-mode 193 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
195 }; 194 };
196 195
197 vreg_l17a_3p0: ldo17 { 196 vreg_l17a_3p0: ldo17 {
198 regulator-min-microvol 197 regulator-min-microvolt = <2920000>;
199 regulator-max-microvol 198 regulator-max-microvolt = <3232000>;
200 regulator-initial-mode 199 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
201 }; 200 };
202 201
203 vreg_l18a_2p8: ldo18 { 202 vreg_l18a_2p8: ldo18 {
204 regulator-min-microvol 203 regulator-min-microvolt = <2496000>;
205 regulator-max-microvol 204 regulator-max-microvolt = <3304000>;
206 regulator-initial-mode 205 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
207 }; 206 };
208 207
209 vreg_l19a_2p9: ldo19 { 208 vreg_l19a_2p9: ldo19 {
210 regulator-min-microvol 209 regulator-min-microvolt = <2960000>;
211 regulator-max-microvol 210 regulator-max-microvolt = <2960000>;
212 regulator-initial-mode 211 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
213 }; 212 };
214 }; 213 };
215 214
216 regulators-1 { 215 regulators-1 {
217 compatible = "qcom,pm6150l-rpm 216 compatible = "qcom,pm6150l-rpmh-regulators";
218 qcom,pmic-id = "c"; 217 qcom,pmic-id = "c";
219 218
220 vreg_s8c_1p3: smps8 { 219 vreg_s8c_1p3: smps8 {
221 regulator-min-microvol 220 regulator-min-microvolt = <1120000>;
222 regulator-max-microvol 221 regulator-max-microvolt = <1408000>;
223 }; 222 };
224 223
225 vreg_l1c_1p8: ldo1 { 224 vreg_l1c_1p8: ldo1 {
226 regulator-min-microvol 225 regulator-min-microvolt = <1616000>;
227 regulator-max-microvol 226 regulator-max-microvolt = <1984000>;
228 regulator-initial-mode 227 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
229 }; 228 };
230 229
231 vreg_l2c_1p3: ldo2 { 230 vreg_l2c_1p3: ldo2 {
232 regulator-min-microvol 231 regulator-min-microvolt = <1168000>;
233 regulator-max-microvol 232 regulator-max-microvolt = <1304000>;
234 regulator-initial-mode 233 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
235 }; 234 };
236 235
237 vreg_l3c_1p2: ldo3 { 236 vreg_l3c_1p2: ldo3 {
238 regulator-min-microvol 237 regulator-min-microvolt = <1144000>;
239 regulator-max-microvol 238 regulator-max-microvolt = <1304000>;
240 regulator-initial-mode 239 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
241 }; 240 };
242 241
243 vreg_l4c_1p8: ldo4 { 242 vreg_l4c_1p8: ldo4 {
244 regulator-min-microvol 243 regulator-min-microvolt = <1648000>;
245 regulator-max-microvol 244 regulator-max-microvolt = <3304000>;
246 regulator-initial-mode 245 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
247 }; 246 };
248 247
249 vreg_l5c_1p8: ldo5 { 248 vreg_l5c_1p8: ldo5 {
250 regulator-min-microvol 249 regulator-min-microvolt = <1648000>;
251 regulator-max-microvol 250 regulator-max-microvolt = <3304000>;
252 regulator-initial-mode 251 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
253 }; 252 };
254 253
255 vreg_l6c_2p9: ldo6 { 254 vreg_l6c_2p9: ldo6 {
256 regulator-min-microvol 255 regulator-min-microvolt = <1800000>;
257 regulator-max-microvol 256 regulator-max-microvolt = <2950000>;
258 regulator-initial-mode 257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
259 }; 258 };
260 259
261 vreg_l7c_3p0: ldo7 { 260 vreg_l7c_3p0: ldo7 {
262 regulator-min-microvol 261 regulator-min-microvolt = <3000000>;
263 regulator-max-microvol 262 regulator-max-microvolt = <3312000>;
264 regulator-initial-mode 263 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
265 }; 264 };
266 265
267 vreg_l8c_1p8: ldo8 { 266 vreg_l8c_1p8: ldo8 {
268 regulator-min-microvol 267 regulator-min-microvolt = <1800000>;
269 regulator-max-microvol 268 regulator-max-microvolt = <1904000>;
270 regulator-initial-mode 269 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
271 }; 270 };
272 271
273 vreg_l9c_2p9: ldo9 { 272 vreg_l9c_2p9: ldo9 {
274 regulator-min-microvol 273 regulator-min-microvolt = <2960000>;
275 regulator-max-microvol 274 regulator-max-microvolt = <2960000>;
276 regulator-initial-mode 275 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
277 }; 276 };
278 277
279 vreg_l10c_3p3: ldo10 { 278 vreg_l10c_3p3: ldo10 {
280 regulator-min-microvol 279 regulator-min-microvolt = <3000000>;
281 regulator-max-microvol 280 regulator-max-microvolt = <3400000>;
282 regulator-initial-mode 281 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
283 }; 282 };
284 283
285 vreg_l11c_3p3: ldo11 { 284 vreg_l11c_3p3: ldo11 {
286 regulator-min-microvol 285 regulator-min-microvolt = <3000000>;
287 regulator-max-microvol 286 regulator-max-microvolt = <3400000>;
288 regulator-initial-mode 287 regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
289 }; 288 };
290 289
291 vreg_bob: bob { 290 vreg_bob: bob {
292 regulator-min-microvol 291 regulator-min-microvolt = <3008000>;
293 regulator-max-microvol 292 regulator-max-microvolt = <3960000>;
294 regulator-initial-mode 293 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
295 }; 294 };
296 }; 295 };
297 }; 296 };
298 297
299 &mdss { 298 &mdss {
300 status = "okay"; 299 status = "okay";
301 }; 300 };
302 301
303 &mdss_dsi0 { 302 &mdss_dsi0 {
304 status = "okay"; 303 status = "okay";
305 304
306 vdda-supply = <&vreg_l3c_1p2>; 305 vdda-supply = <&vreg_l3c_1p2>;
307 306
308 panel@0 { 307 panel@0 {
309 compatible = "visionox,rm69299 308 compatible = "visionox,rm69299-1080p-display";
310 reg = <0>; 309 reg = <0>;
311 310
312 vdda-supply = <&vreg_l8c_1p8>; 311 vdda-supply = <&vreg_l8c_1p8>;
313 vdd3p3-supply = <&vreg_l18a_2p 312 vdd3p3-supply = <&vreg_l18a_2p8>;
314 313
315 pinctrl-names = "default"; 314 pinctrl-names = "default";
316 pinctrl-0 = <&disp_pins>; 315 pinctrl-0 = <&disp_pins>;
317 316
318 reset-gpios = <&pm6150l_gpios 317 reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>;
319 318
320 port { 319 port {
321 panel0_in: endpoint { 320 panel0_in: endpoint {
322 remote-endpoin 321 remote-endpoint = <&mdss_dsi0_out>;
323 }; 322 };
324 }; 323 };
325 }; 324 };
326 325
327 ports { 326 ports {
328 port@1 { 327 port@1 {
329 endpoint { 328 endpoint {
330 remote-endpoin 329 remote-endpoint = <&panel0_in>;
331 data-lanes = < 330 data-lanes = <0 1 2 3>;
332 }; 331 };
333 }; 332 };
334 }; 333 };
335 }; 334 };
336 335
337 &mdss_dsi0_phy { 336 &mdss_dsi0_phy {
338 status = "okay"; 337 status = "okay";
339 vdds-supply = <&vreg_l4a_0p8>; 338 vdds-supply = <&vreg_l4a_0p8>;
340 }; 339 };
341 340
342 &qfprom { 341 &qfprom {
343 vcc-supply = <&vreg_l11a_1p8>; 342 vcc-supply = <&vreg_l11a_1p8>;
344 }; 343 };
345 344
346 &qspi { 345 &qspi {
347 status = "okay"; 346 status = "okay";
348 pinctrl-names = "default"; 347 pinctrl-names = "default";
349 pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, 348 pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
350 349
351 flash@0 { 350 flash@0 {
352 compatible = "jedec,spi-nor"; 351 compatible = "jedec,spi-nor";
353 reg = <0>; 352 reg = <0>;
354 spi-max-frequency = <25000000> 353 spi-max-frequency = <25000000>;
355 spi-tx-bus-width = <2>; 354 spi-tx-bus-width = <2>;
356 spi-rx-bus-width = <2>; 355 spi-rx-bus-width = <2>;
357 }; 356 };
358 }; 357 };
359 358
360 &qupv3_id_0 { 359 &qupv3_id_0 {
361 status = "okay"; 360 status = "okay";
362 }; 361 };
363 362
364 &qupv3_id_1 { 363 &qupv3_id_1 {
365 status = "okay"; 364 status = "okay";
366 }; 365 };
367 366
368 &remoteproc_mpss { 367 &remoteproc_mpss {
369 status = "okay"; 368 status = "okay";
370 compatible = "qcom,sc7180-mss-pil"; 369 compatible = "qcom,sc7180-mss-pil";
371 reg = <0 0x04080000 0 0x4040>, <0 0x04 370 reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
372 reg-names = "qdsp6", "rmb"; 371 reg-names = "qdsp6", "rmb";
373 372
374 clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, 373 clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
375 <&gcc GCC_MSS_Q6_MEMNOC_AXI_C 374 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
376 <&gcc GCC_MSS_NAV_AXI_CLK>, 375 <&gcc GCC_MSS_NAV_AXI_CLK>,
377 <&gcc GCC_MSS_SNOC_AXI_CLK>, 376 <&gcc GCC_MSS_SNOC_AXI_CLK>,
378 <&gcc GCC_MSS_MFAB_AXIS_CLK>, 377 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
379 <&rpmhcc RPMH_CXO_CLK>; 378 <&rpmhcc RPMH_CXO_CLK>;
380 clock-names = "iface", "bus", "nav", " 379 clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo";
381 380
382 iommus = <&apps_smmu 0x461 0x0>, <&app 381 iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
383 memory-region = <&mba_mem>, <&mpss_mem 382 memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
384 383
385 resets = <&aoss_reset AOSS_CC_MSS_REST 384 resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
386 <&pdc_reset PDC_MODEM_SYNC_RE 385 <&pdc_reset PDC_MODEM_SYNC_RESET>;
387 reset-names = "mss_restart", "pdc_rese 386 reset-names = "mss_restart", "pdc_reset";
388 387
389 qcom,halt-regs = <&tcsr_regs_1 0x3000 388 qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
390 qcom,spare-regs = <&tcsr_regs_2 0xb3e4 389 qcom,spare-regs = <&tcsr_regs_2 0xb3e4>;
391 }; 390 };
392 391
393 &scm { 392 &scm {
394 /* TF-A firmware maps memory cached so 393 /* TF-A firmware maps memory cached so mark dma-coherent to match. */
395 dma-coherent; 394 dma-coherent;
396 }; 395 };
397 396
398 &sdhc_1 { 397 &sdhc_1 {
399 status = "okay"; 398 status = "okay";
400 399
401 pinctrl-names = "default", "sleep"; 400 pinctrl-names = "default", "sleep";
402 pinctrl-0 = <&sdc1_on>; 401 pinctrl-0 = <&sdc1_on>;
403 pinctrl-1 = <&sdc1_off>; 402 pinctrl-1 = <&sdc1_off>;
404 vmmc-supply = <&vreg_l19a_2p9>; 403 vmmc-supply = <&vreg_l19a_2p9>;
405 vqmmc-supply = <&vreg_l12a_1p8>; 404 vqmmc-supply = <&vreg_l12a_1p8>;
406 }; 405 };
407 406
408 &sdhc_2 { 407 &sdhc_2 {
409 status = "okay"; 408 status = "okay";
410 409
411 pinctrl-names = "default","sleep"; 410 pinctrl-names = "default","sleep";
412 pinctrl-0 = <&sdc2_on>; 411 pinctrl-0 = <&sdc2_on>;
413 pinctrl-1 = <&sdc2_off>; 412 pinctrl-1 = <&sdc2_off>;
414 vmmc-supply = <&vreg_l9c_2p9>; 413 vmmc-supply = <&vreg_l9c_2p9>;
415 vqmmc-supply = <&vreg_l6c_2p9>; 414 vqmmc-supply = <&vreg_l6c_2p9>;
416 415
417 cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; 416 cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
418 }; 417 };
419 418
420 &uart3 { 419 &uart3 {
421 status = "okay"; 420 status = "okay";
422 421
423 /delete-property/interrupts; 422 /delete-property/interrupts;
424 interrupts-extended = <&intc GIC_SPI 6 423 interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
425 <&tlmm 41 IRQ_ 424 <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
426 425
427 pinctrl-names = "default", "sleep"; 426 pinctrl-names = "default", "sleep";
428 pinctrl-1 = <&qup_uart3_sleep>; 427 pinctrl-1 = <&qup_uart3_sleep>;
429 428
430 bluetooth: bluetooth { 429 bluetooth: bluetooth {
431 compatible = "qcom,wcn3990-bt" 430 compatible = "qcom,wcn3990-bt";
432 vddio-supply = <&vreg_l10a_1p8 431 vddio-supply = <&vreg_l10a_1p8>;
433 vddxo-supply = <&vreg_l1c_1p8> 432 vddxo-supply = <&vreg_l1c_1p8>;
434 vddrf-supply = <&vreg_l2c_1p3> 433 vddrf-supply = <&vreg_l2c_1p3>;
435 vddch0-supply = <&vreg_l10c_3p 434 vddch0-supply = <&vreg_l10c_3p3>;
436 max-speed = <3200000>; 435 max-speed = <3200000>;
437 }; 436 };
438 }; 437 };
439 438
440 &uart8 { 439 &uart8 {
441 status = "okay"; 440 status = "okay";
442 }; 441 };
443 442
444 &usb_1 { 443 &usb_1 {
445 status = "okay"; 444 status = "okay";
446 }; 445 };
447 446
448 &usb_1_dwc3 { 447 &usb_1_dwc3 {
449 dr_mode = "host"; 448 dr_mode = "host";
450 }; 449 };
451 450
452 &usb_1_hsphy { 451 &usb_1_hsphy {
453 status = "okay"; 452 status = "okay";
454 vdd-supply = <&vreg_l4a_0p8>; 453 vdd-supply = <&vreg_l4a_0p8>;
455 vdda-pll-supply = <&vreg_l11a_1p8>; 454 vdda-pll-supply = <&vreg_l11a_1p8>;
456 vdda-phy-dpdm-supply = <&vreg_l17a_3p0 455 vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
457 qcom,imp-res-offset-value = <8>; 456 qcom,imp-res-offset-value = <8>;
458 qcom,preemphasis-level = <QUSB2_V2_PRE 457 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
459 qcom,preemphasis-width = <QUSB2_V2_PRE 458 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
460 qcom,bias-ctrl-value = <0x22>; 459 qcom,bias-ctrl-value = <0x22>;
461 qcom,charge-ctrl-value = <3>; 460 qcom,charge-ctrl-value = <3>;
462 qcom,hsdisc-trim-value = <0>; 461 qcom,hsdisc-trim-value = <0>;
463 }; 462 };
464 463
465 &usb_1_qmpphy { 464 &usb_1_qmpphy {
466 status = "okay"; 465 status = "okay";
467 vdda-phy-supply = <&vreg_l3c_1p2>; 466 vdda-phy-supply = <&vreg_l3c_1p2>;
468 vdda-pll-supply = <&vreg_l4a_0p8>; 467 vdda-pll-supply = <&vreg_l4a_0p8>;
469 }; 468 };
470 469
471 &venus { 470 &venus {
472 video-firmware { 471 video-firmware {
473 iommus = <&apps_smmu 0x0c42 0x 472 iommus = <&apps_smmu 0x0c42 0x0>;
474 }; 473 };
475 }; 474 };
476 475
477 &wifi { 476 &wifi {
478 status = "okay"; 477 status = "okay";
479 vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6> 478 vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
480 vdd-1.8-xo-supply = <&vreg_l1c_1p8>; 479 vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
481 vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; 480 vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
482 vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; 481 vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
483 vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; 482 vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
484 wifi-firmware { 483 wifi-firmware {
485 iommus = <&apps_smmu 0xc2 0x1> 484 iommus = <&apps_smmu 0xc2 0x1>;
486 }; 485 };
487 }; 486 };
488 487
489 /* PINCTRL - additions to nodes defined in sc7 488 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
490 489
491 &pm6150l_gpios { 490 &pm6150l_gpios {
492 disp_pins: disp-state { 491 disp_pins: disp-state {
493 pinconf { 492 pinconf {
494 pins = "gpio3"; 493 pins = "gpio3";
495 function = PMIC_GPIO_F 494 function = PMIC_GPIO_FUNC_FUNC1;
496 qcom,drive-strength = 495 qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
497 power-source = <0>; 496 power-source = <0>;
498 bias-disable; 497 bias-disable;
499 output-low; 498 output-low;
500 }; 499 };
501 }; 500 };
502 }; 501 };
503 502
504 &qspi_clk { 503 &qspi_clk {
505 bias-disable; 504 bias-disable;
506 }; 505 };
507 506
508 &qspi_cs0 { 507 &qspi_cs0 {
509 bias-disable; 508 bias-disable;
510 }; 509 };
511 510
512 &qspi_data0 { 511 &qspi_data0 {
513 bias-pull-up; 512 bias-pull-up;
514 }; 513 };
515 514
516 &qspi_data1 { 515 &qspi_data1 {
517 bias-pull-up; 516 bias-pull-up;
518 }; 517 };
519 518
520 &qup_i2c2_default { 519 &qup_i2c2_default {
521 drive-strength = <2>; 520 drive-strength = <2>;
522 521
523 /* Has external pullup */ 522 /* Has external pullup */
524 bias-disable; 523 bias-disable;
525 }; 524 };
526 525
527 &qup_i2c4_default { 526 &qup_i2c4_default {
528 drive-strength = <2>; 527 drive-strength = <2>;
529 528
530 /* Has external pullup */ 529 /* Has external pullup */
531 bias-disable; 530 bias-disable;
532 }; 531 };
533 532
534 &qup_i2c7_default { 533 &qup_i2c7_default {
535 drive-strength = <2>; 534 drive-strength = <2>;
536 535
537 /* Has external pullup */ 536 /* Has external pullup */
538 bias-disable; 537 bias-disable;
539 }; 538 };
540 539
541 &qup_i2c9_default { 540 &qup_i2c9_default {
542 drive-strength = <2>; 541 drive-strength = <2>;
543 542
544 /* Has external pullup */ 543 /* Has external pullup */
545 bias-disable; 544 bias-disable;
546 }; 545 };
547 546
548 &qup_uart3_cts { 547 &qup_uart3_cts {
549 /* 548 /*
550 * Configure a pull-down on CTS to mat 549 * Configure a pull-down on CTS to match the pull of
551 * the Bluetooth module. 550 * the Bluetooth module.
552 */ 551 */
553 bias-pull-down; 552 bias-pull-down;
554 }; 553 };
555 554
556 &qup_uart3_rts { 555 &qup_uart3_rts {
557 /* We'll drive RTS, so no pull */ 556 /* We'll drive RTS, so no pull */
558 drive-strength = <2>; 557 drive-strength = <2>;
559 bias-disable; 558 bias-disable;
560 }; 559 };
561 560
562 &qup_uart3_tx { 561 &qup_uart3_tx {
563 /* We'll drive TX, so no pull */ 562 /* We'll drive TX, so no pull */
564 drive-strength = <2>; 563 drive-strength = <2>;
565 bias-disable; 564 bias-disable;
566 }; 565 };
567 566
568 &qup_uart3_rx { 567 &qup_uart3_rx {
569 /* 568 /*
570 * Configure a pull-up on RX. This is 569 * Configure a pull-up on RX. This is needed to avoid
571 * garbage data when the TX pin of the 570 * garbage data when the TX pin of the Bluetooth module is
572 * in tri-state (module powered off or 571 * in tri-state (module powered off or not driving the
573 * signal yet). 572 * signal yet).
574 */ 573 */
575 bias-pull-up; 574 bias-pull-up;
576 }; 575 };
577 576
578 &qup_uart8_tx { 577 &qup_uart8_tx {
579 drive-strength = <2>; 578 drive-strength = <2>;
580 bias-disable; 579 bias-disable;
581 }; 580 };
582 581
583 &qup_uart8_rx { 582 &qup_uart8_rx {
584 drive-strength = <2>; 583 drive-strength = <2>;
585 bias-pull-up; 584 bias-pull-up;
586 }; 585 };
587 586
588 &qup_spi0_spi { 587 &qup_spi0_spi {
589 drive-strength = <2>; 588 drive-strength = <2>;
590 bias-disable; 589 bias-disable;
591 }; 590 };
592 591
593 &qup_spi0_cs { 592 &qup_spi0_cs {
594 drive-strength = <2>; 593 drive-strength = <2>;
595 bias-disable; 594 bias-disable;
596 }; 595 };
597 596
598 &qup_spi6_spi { 597 &qup_spi6_spi {
599 drive-strength = <2>; 598 drive-strength = <2>;
600 bias-disable; 599 bias-disable;
601 }; 600 };
602 601
603 &qup_spi6_cs { 602 &qup_spi6_cs {
604 drive-strength = <2>; 603 drive-strength = <2>;
605 bias-disable; 604 bias-disable;
606 }; 605 };
607 606
608 &qup_spi10_spi { 607 &qup_spi10_spi {
609 drive-strength = <2>; 608 drive-strength = <2>;
610 bias-disable; 609 bias-disable;
611 }; 610 };
612 611
613 &qup_spi10_cs { 612 &qup_spi10_cs {
614 drive-strength = <2>; 613 drive-strength = <2>;
615 bias-disable; 614 bias-disable;
616 }; 615 };
617 616
618 &tlmm { 617 &tlmm {
619 qup_uart3_sleep: qup-uart3-sleep-state 618 qup_uart3_sleep: qup-uart3-sleep-state {
620 cts-pins { 619 cts-pins {
621 /* 620 /*
622 * Configure a pull-do 621 * Configure a pull-down on CTS to match the pull of
623 * the Bluetooth modul 622 * the Bluetooth module.
624 */ 623 */
625 pins = "gpio38"; 624 pins = "gpio38";
626 function = "gpio"; 625 function = "gpio";
627 bias-pull-down; 626 bias-pull-down;
628 }; 627 };
629 628
630 rts-pins { 629 rts-pins {
631 /* 630 /*
632 * Configure pull-down 631 * Configure pull-down on RTS. As RTS is active low
633 * signal, pull it low 632 * signal, pull it low to indicate the BT SoC that it
634 * can wakeup the syst 633 * can wakeup the system anytime from suspend state by
635 * pulling RX low (by 634 * pulling RX low (by sending wakeup bytes).
636 */ 635 */
637 pins = "gpio39"; 636 pins = "gpio39";
638 function = "gpio"; 637 function = "gpio";
639 bias-pull-down; 638 bias-pull-down;
640 }; 639 };
641 640
642 tx-pins { 641 tx-pins {
643 /* 642 /*
644 * Configure pull-up o 643 * Configure pull-up on TX when it isn't actively driven
645 * to prevent BT SoC f 644 * to prevent BT SoC from receiving garbage during sleep.
646 */ 645 */
647 pins = "gpio40"; 646 pins = "gpio40";
648 function = "gpio"; 647 function = "gpio";
649 bias-pull-up; 648 bias-pull-up;
650 }; 649 };
651 650
652 rx-pins { 651 rx-pins {
653 /* 652 /*
654 * Configure a pull-up 653 * Configure a pull-up on RX. This is needed to avoid
655 * garbage data when t 654 * garbage data when the TX pin of the Bluetooth module
656 * is floating which m 655 * is floating which may cause spurious wakeups.
657 */ 656 */
658 pins = "gpio41"; 657 pins = "gpio41";
659 function = "gpio"; 658 function = "gpio";
660 bias-pull-up; 659 bias-pull-up;
661 }; 660 };
662 }; 661 };
663 662
664 sdc1_on: sdc1-on-state { 663 sdc1_on: sdc1-on-state {
665 clk-pins { 664 clk-pins {
666 pins = "sdc1_clk"; 665 pins = "sdc1_clk";
667 bias-disable; 666 bias-disable;
668 drive-strength = <16>; 667 drive-strength = <16>;
669 }; 668 };
670 669
671 cmd-pins { 670 cmd-pins {
672 pins = "sdc1_cmd"; 671 pins = "sdc1_cmd";
673 bias-pull-up; 672 bias-pull-up;
674 drive-strength = <10>; 673 drive-strength = <10>;
675 }; 674 };
676 675
677 data-pins { 676 data-pins {
678 pins = "sdc1_data"; 677 pins = "sdc1_data";
679 bias-pull-up; 678 bias-pull-up;
680 drive-strength = <10>; 679 drive-strength = <10>;
681 }; 680 };
682 681
683 rclk-pins { 682 rclk-pins {
684 pins = "sdc1_rclk"; 683 pins = "sdc1_rclk";
685 bias-pull-down; 684 bias-pull-down;
686 }; 685 };
687 }; 686 };
688 687
689 sdc1_off: sdc1-off-state { 688 sdc1_off: sdc1-off-state {
690 clk-pins { 689 clk-pins {
691 pins = "sdc1_clk"; 690 pins = "sdc1_clk";
692 bias-disable; 691 bias-disable;
693 drive-strength = <2>; 692 drive-strength = <2>;
694 }; 693 };
695 694
696 cmd-pins { 695 cmd-pins {
697 pins = "sdc1_cmd"; 696 pins = "sdc1_cmd";
698 bias-pull-up; 697 bias-pull-up;
699 drive-strength = <2>; 698 drive-strength = <2>;
700 }; 699 };
701 700
702 data-pins { 701 data-pins {
703 pins = "sdc1_data"; 702 pins = "sdc1_data";
704 bias-pull-up; 703 bias-pull-up;
705 drive-strength = <2>; 704 drive-strength = <2>;
706 }; 705 };
707 706
708 rclk-pins { 707 rclk-pins {
709 pins = "sdc1_rclk"; 708 pins = "sdc1_rclk";
710 bias-pull-down; 709 bias-pull-down;
711 }; 710 };
712 }; 711 };
713 712
714 sdc2_on: sdc2-on-state { 713 sdc2_on: sdc2-on-state {
715 clk-pins { 714 clk-pins {
716 pins = "sdc2_clk"; 715 pins = "sdc2_clk";
717 bias-disable; 716 bias-disable;
718 drive-strength = <16>; 717 drive-strength = <16>;
719 }; 718 };
720 719
721 cmd-pins { 720 cmd-pins {
722 pins = "sdc2_cmd"; 721 pins = "sdc2_cmd";
723 bias-pull-up; 722 bias-pull-up;
724 drive-strength = <10>; 723 drive-strength = <10>;
725 }; 724 };
726 725
727 data-pins { 726 data-pins {
728 pins = "sdc2_data"; 727 pins = "sdc2_data";
729 bias-pull-up; 728 bias-pull-up;
730 drive-strength = <10>; 729 drive-strength = <10>;
731 }; 730 };
732 731
733 sd-cd-pins { 732 sd-cd-pins {
734 pins = "gpio69"; 733 pins = "gpio69";
735 function = "gpio"; 734 function = "gpio";
736 bias-pull-up; 735 bias-pull-up;
737 drive-strength = <2>; 736 drive-strength = <2>;
738 }; 737 };
739 }; 738 };
740 739
741 sdc2_off: sdc2-off-state { 740 sdc2_off: sdc2-off-state {
742 clk-pins { 741 clk-pins {
743 pins = "sdc2_clk"; 742 pins = "sdc2_clk";
744 bias-disable; 743 bias-disable;
745 drive-strength = <2>; 744 drive-strength = <2>;
746 }; 745 };
747 746
748 cmd-pins { 747 cmd-pins {
749 pins = "sdc2_cmd"; 748 pins = "sdc2_cmd";
750 bias-pull-up; 749 bias-pull-up;
751 drive-strength = <2>; 750 drive-strength = <2>;
752 }; 751 };
753 752
754 data-pins { 753 data-pins {
755 pins = "sdc2_data"; 754 pins = "sdc2_data";
756 bias-pull-up; 755 bias-pull-up;
757 drive-strength = <2>; 756 drive-strength = <2>;
758 }; 757 };
759 758
760 sd-cd-pins { 759 sd-cd-pins {
761 pins = "gpio69"; 760 pins = "gpio69";
762 function = "gpio"; 761 function = "gpio";
763 bias-pull-up; 762 bias-pull-up;
764 drive-strength = <2>; 763 drive-strength = <2>;
765 }; 764 };
766 }; 765 };
767 }; 766 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.