1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * sc7280 IDP board device tree source (common 3 * sc7280 IDP board device tree source (common between SKU1 and SKU2)
4 * 4 *
5 * Copyright (c) 2021, The Linux Foundation. A 5 * Copyright (c) 2021, The Linux Foundation. All rights reserved.
6 */ 6 */
7 7
8 #include <dt-bindings/iio/qcom,spmi-adc7-pmk83 8 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
9 #include <dt-bindings/input/linux-event-codes. 9 #include <dt-bindings/input/linux-event-codes.h>
10 #include "sc7280.dtsi" 10 #include "sc7280.dtsi"
11 #include "pm7325.dtsi" 11 #include "pm7325.dtsi"
12 #include "pm8350c.dtsi" 12 #include "pm8350c.dtsi"
13 #include "pmk8350.dtsi" 13 #include "pmk8350.dtsi"
14 14
15 #include "sc7280-chrome-common.dtsi" 15 #include "sc7280-chrome-common.dtsi"
16 #include "sc7280-herobrine-lte-sku.dtsi" <<
17 16
18 / { 17 / {
19 aliases { 18 aliases {
20 bluetooth0 = &bluetooth; 19 bluetooth0 = &bluetooth;
21 serial1 = &uart7; 20 serial1 = &uart7;
22 wifi0 = &wifi; <<
23 }; <<
24 <<
25 max98360a: audio-codec-0 { <<
26 compatible = "maxim,max98360a" <<
27 pinctrl-names = "default"; <<
28 pinctrl-0 = <&_en>; <<
29 sdmode-gpios = <&tlmm 63 GPIO_ <<
30 #sound-dai-cells = <0>; <<
31 }; <<
32 <<
33 wcd9385: audio-codec-1 { <<
34 compatible = "qcom,wcd9385-cod <<
35 pinctrl-names = "default", "sl <<
36 pinctrl-0 = <&wcd_reset_n>; <<
37 pinctrl-1 = <&wcd_reset_n_slee <<
38 <<
39 reset-gpios = <&tlmm 83 GPIO_A <<
40 <<
41 qcom,rx-device = <&wcd_rx>; <<
42 qcom,tx-device = <&wcd_tx>; <<
43 <<
44 vdd-rxtx-supply = <&vreg_l18b_ <<
45 vdd-io-supply = <&vreg_l18b_1p <<
46 vdd-buck-supply = <&vreg_l17b_ <<
47 vdd-mic-bias-supply = <&vreg_b <<
48 <<
49 qcom,micbias1-microvolt = <180 <<
50 qcom,micbias2-microvolt = <180 <<
51 qcom,micbias3-microvolt = <180 <<
52 qcom,micbias4-microvolt = <180 <<
53 <<
54 qcom,mbhc-buttons-vthreshold-m <<
55 <<
56 qcom,mbhc-headset-vthreshold-m <<
57 qcom,mbhc-headphone-vthreshold <<
58 #sound-dai-cells = <1>; <<
59 }; 21 };
60 22
61 gpio-keys { 23 gpio-keys {
62 compatible = "gpio-keys"; 24 compatible = "gpio-keys";
63 label = "gpio-keys"; 25 label = "gpio-keys";
64 26
65 pinctrl-names = "default"; 27 pinctrl-names = "default";
66 pinctrl-0 = <&key_vol_up_defau 28 pinctrl-0 = <&key_vol_up_default>;
67 29
68 key-volume-up { 30 key-volume-up {
69 label = "volume_up"; 31 label = "volume_up";
70 gpios = <&pm7325_gpios 32 gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
71 linux,input-type = <1> 33 linux,input-type = <1>;
72 linux,code = <KEY_VOLU 34 linux,code = <KEY_VOLUMEUP>;
73 wakeup-source; !! 35 gpio-key,wakeup;
74 debounce-interval = <1 36 debounce-interval = <15>;
75 linux,can-disable; 37 linux,can-disable;
76 }; 38 };
77 }; 39 };
78 40
79 nvme_3v3_regulator: nvme-3v3-regulator 41 nvme_3v3_regulator: nvme-3v3-regulator {
80 compatible = "regulator-fixed" 42 compatible = "regulator-fixed";
81 regulator-name = "VLDO_3V3"; 43 regulator-name = "VLDO_3V3";
82 44
83 regulator-min-microvolt = <330 45 regulator-min-microvolt = <3300000>;
84 regulator-max-microvolt = <330 46 regulator-max-microvolt = <3300000>;
85 47
86 enable-active-high; 48 enable-active-high;
87 pinctrl-names = "default"; 49 pinctrl-names = "default";
88 pinctrl-0 = <&nvme_pwren>; 50 pinctrl-0 = <&nvme_pwren>;
89 }; 51 };
90 <<
91 sound: sound { <<
92 compatible = "google,sc7280-he <<
93 model = "sc7280-wcd938x-max983 <<
94 <<
95 audio-routing = <<
96 "IN1_HPHL", "HPHL_OUT" <<
97 "IN2_HPHR", "HPHR_OUT" <<
98 "AMIC1", "MIC BIAS1", <<
99 "AMIC2", "MIC BIAS2", <<
100 "VA DMIC0", "MIC BIAS3 <<
101 "VA DMIC1", "MIC BIAS3 <<
102 "VA DMIC2", "MIC BIAS1 <<
103 "VA DMIC3", "MIC BIAS1 <<
104 "TX SWR_ADC0", "ADC1_O <<
105 "TX SWR_ADC1", "ADC2_O <<
106 "TX SWR_ADC2", "ADC3_O <<
107 "TX SWR_DMIC0", "DMIC1 <<
108 "TX SWR_DMIC1", "DMIC2 <<
109 "TX SWR_DMIC2", "DMIC3 <<
110 "TX SWR_DMIC3", "DMIC4 <<
111 "TX SWR_DMIC4", "DMIC5 <<
112 "TX SWR_DMIC5", "DMIC6 <<
113 "TX SWR_DMIC6", "DMIC7 <<
114 "TX SWR_DMIC7", "DMIC8 <<
115 <<
116 #address-cells = <1>; <<
117 #size-cells = <0>; <<
118 <<
119 dai-link@0 { <<
120 link-name = "MAX98360A <<
121 reg = <0>; <<
122 <<
123 cpu { <<
124 sound-dai = <& <<
125 }; <<
126 <<
127 codec { <<
128 sound-dai = <& <<
129 }; <<
130 }; <<
131 <<
132 dai-link@1 { <<
133 link-name = "DisplayPo <<
134 reg = <1>; <<
135 <<
136 cpu { <<
137 sound-dai = <& <<
138 }; <<
139 <<
140 codec { <<
141 sound-dai = <& <<
142 }; <<
143 }; <<
144 <<
145 dai-link@2 { <<
146 link-name = "WCD9385 P <<
147 reg = <2>; <<
148 <<
149 cpu { <<
150 sound-dai = <& <<
151 }; <<
152 <<
153 codec { <<
154 sound-dai = <& <<
155 }; <<
156 }; <<
157 <<
158 dai-link@3 { <<
159 link-name = "WCD9385 C <<
160 reg = <3>; <<
161 <<
162 cpu { <<
163 sound-dai = <& <<
164 }; <<
165 <<
166 codec { <<
167 sound-dai = <& <<
168 }; <<
169 }; <<
170 <<
171 dai-link@4 { <<
172 link-name = "DMIC"; <<
173 reg = <4>; <<
174 <<
175 cpu { <<
176 sound-dai = <& <<
177 }; <<
178 <<
179 codec { <<
180 sound-dai = <& <<
181 }; <<
182 }; <<
183 }; <<
184 }; 52 };
185 53
186 &apps_rsc { 54 &apps_rsc {
187 regulators-0 { !! 55 pm7325-regulators {
188 compatible = "qcom,pm7325-rpmh 56 compatible = "qcom,pm7325-rpmh-regulators";
189 qcom,pmic-id = "b"; 57 qcom,pmic-id = "b";
190 58
191 vreg_s1b_1p8: smps1 { 59 vreg_s1b_1p8: smps1 {
192 regulator-min-microvol 60 regulator-min-microvolt = <1856000>;
193 regulator-max-microvol 61 regulator-max-microvolt = <2040000>;
194 }; 62 };
195 63
196 vreg_s7b_0p9: smps7 { 64 vreg_s7b_0p9: smps7 {
197 regulator-min-microvol 65 regulator-min-microvolt = <535000>;
198 regulator-max-microvol 66 regulator-max-microvolt = <1120000>;
199 }; 67 };
200 68
201 vreg_s8b_1p2: smps8 { 69 vreg_s8b_1p2: smps8 {
202 regulator-min-microvol 70 regulator-min-microvolt = <1256000>;
203 regulator-max-microvol 71 regulator-max-microvolt = <1500000>;
204 }; 72 };
205 73
206 vreg_l1b_0p8: ldo1 { 74 vreg_l1b_0p8: ldo1 {
207 regulator-min-microvol 75 regulator-min-microvolt = <825000>;
208 regulator-max-microvol 76 regulator-max-microvolt = <925000>;
209 }; 77 };
210 78
211 vreg_l2b_3p0: ldo2 { 79 vreg_l2b_3p0: ldo2 {
212 regulator-min-microvol 80 regulator-min-microvolt = <2700000>;
213 regulator-max-microvol 81 regulator-max-microvolt = <3544000>;
214 }; 82 };
215 83
216 vreg_l6b_1p2: ldo6 { 84 vreg_l6b_1p2: ldo6 {
217 regulator-min-microvol 85 regulator-min-microvolt = <1140000>;
218 regulator-max-microvol 86 regulator-max-microvolt = <1260000>;
219 }; 87 };
220 88
221 vreg_l7b_2p9: ldo7 { 89 vreg_l7b_2p9: ldo7 {
222 regulator-min-microvol 90 regulator-min-microvolt = <2960000>;
223 regulator-max-microvol 91 regulator-max-microvolt = <2960000>;
224 }; 92 };
225 93
226 vreg_l8b_0p9: ldo8 { 94 vreg_l8b_0p9: ldo8 {
227 regulator-min-microvol 95 regulator-min-microvolt = <870000>;
228 regulator-max-microvol 96 regulator-max-microvolt = <970000>;
229 }; 97 };
230 98
231 vreg_l9b_1p2: ldo9 { 99 vreg_l9b_1p2: ldo9 {
232 regulator-min-microvol 100 regulator-min-microvolt = <1080000>;
233 regulator-max-microvol 101 regulator-max-microvolt = <1304000>;
234 }; 102 };
235 103
236 vreg_l11b_1p7: ldo11 { 104 vreg_l11b_1p7: ldo11 {
237 regulator-min-microvol 105 regulator-min-microvolt = <1504000>;
238 regulator-max-microvol 106 regulator-max-microvolt = <2000000>;
239 }; 107 };
240 108
241 vreg_l12b_0p8: ldo12 { 109 vreg_l12b_0p8: ldo12 {
242 regulator-min-microvol 110 regulator-min-microvolt = <751000>;
243 regulator-max-microvol 111 regulator-max-microvolt = <824000>;
244 }; 112 };
245 113
246 vreg_l13b_0p8: ldo13 { 114 vreg_l13b_0p8: ldo13 {
247 regulator-min-microvol 115 regulator-min-microvolt = <530000>;
248 regulator-max-microvol 116 regulator-max-microvolt = <824000>;
249 }; 117 };
250 118
251 vreg_l14b_1p2: ldo14 { 119 vreg_l14b_1p2: ldo14 {
252 regulator-min-microvol 120 regulator-min-microvolt = <1080000>;
253 regulator-max-microvol 121 regulator-max-microvolt = <1304000>;
254 }; 122 };
255 123
256 vreg_l15b_0p8: ldo15 { 124 vreg_l15b_0p8: ldo15 {
257 regulator-min-microvol 125 regulator-min-microvolt = <765000>;
258 regulator-max-microvol 126 regulator-max-microvolt = <1020000>;
259 }; 127 };
260 128
261 vreg_l16b_1p2: ldo16 { 129 vreg_l16b_1p2: ldo16 {
262 regulator-min-microvol 130 regulator-min-microvolt = <1100000>;
263 regulator-max-microvol 131 regulator-max-microvolt = <1300000>;
264 }; 132 };
265 133
266 vreg_l17b_1p8: ldo17 { 134 vreg_l17b_1p8: ldo17 {
267 regulator-min-microvol 135 regulator-min-microvolt = <1700000>;
268 regulator-max-microvol 136 regulator-max-microvolt = <1900000>;
269 }; 137 };
270 138
271 vreg_l18b_1p8: ldo18 { 139 vreg_l18b_1p8: ldo18 {
272 regulator-min-microvol 140 regulator-min-microvolt = <1800000>;
273 regulator-max-microvol 141 regulator-max-microvolt = <2000000>;
274 }; 142 };
275 143
276 vreg_l19b_1p8: ldo19 { 144 vreg_l19b_1p8: ldo19 {
277 regulator-min-microvol 145 regulator-min-microvolt = <1800000>;
278 regulator-max-microvol 146 regulator-max-microvolt = <1800000>;
279 }; 147 };
280 }; 148 };
281 149
282 regulators-1 { !! 150 pm8350c-regulators {
283 compatible = "qcom,pm8350c-rpm 151 compatible = "qcom,pm8350c-rpmh-regulators";
284 qcom,pmic-id = "c"; 152 qcom,pmic-id = "c";
285 153
286 vreg_s1c_2p2: smps1 { 154 vreg_s1c_2p2: smps1 {
287 regulator-min-microvol 155 regulator-min-microvolt = <2190000>;
288 regulator-max-microvol 156 regulator-max-microvolt = <2210000>;
289 }; 157 };
290 158
291 vreg_s9c_1p0: smps9 { 159 vreg_s9c_1p0: smps9 {
292 regulator-min-microvol 160 regulator-min-microvolt = <1010000>;
293 regulator-max-microvol 161 regulator-max-microvolt = <1170000>;
294 }; 162 };
295 163
296 vreg_l1c_1p8: ldo1 { 164 vreg_l1c_1p8: ldo1 {
297 regulator-min-microvol 165 regulator-min-microvolt = <1800000>;
298 regulator-max-microvol 166 regulator-max-microvolt = <1980000>;
299 }; 167 };
300 168
301 vreg_l2c_1p8: ldo2 { 169 vreg_l2c_1p8: ldo2 {
302 regulator-min-microvol 170 regulator-min-microvolt = <1620000>;
303 regulator-max-microvol 171 regulator-max-microvolt = <1980000>;
304 }; 172 };
305 173
306 vreg_l3c_3p0: ldo3 { 174 vreg_l3c_3p0: ldo3 {
307 regulator-min-microvol 175 regulator-min-microvolt = <2800000>;
308 regulator-max-microvol 176 regulator-max-microvolt = <3540000>;
309 }; 177 };
310 178
311 vreg_l4c_1p8: ldo4 { 179 vreg_l4c_1p8: ldo4 {
312 regulator-min-microvol 180 regulator-min-microvolt = <1620000>;
313 regulator-max-microvol 181 regulator-max-microvolt = <3300000>;
314 }; 182 };
315 183
316 vreg_l5c_1p8: ldo5 { 184 vreg_l5c_1p8: ldo5 {
317 regulator-min-microvol 185 regulator-min-microvolt = <1620000>;
318 regulator-max-microvol 186 regulator-max-microvolt = <3300000>;
319 }; 187 };
320 188
321 vreg_l6c_2p9: ldo6 { 189 vreg_l6c_2p9: ldo6 {
322 regulator-min-microvol 190 regulator-min-microvolt = <1800000>;
323 regulator-max-microvol 191 regulator-max-microvolt = <2950000>;
324 }; 192 };
325 193
326 vreg_l7c_3p0: ldo7 { 194 vreg_l7c_3p0: ldo7 {
327 regulator-min-microvol 195 regulator-min-microvolt = <3000000>;
328 regulator-max-microvol 196 regulator-max-microvolt = <3544000>;
329 }; 197 };
330 198
331 vreg_l8c_1p8: ldo8 { 199 vreg_l8c_1p8: ldo8 {
332 regulator-min-microvol 200 regulator-min-microvolt = <1620000>;
333 regulator-max-microvol 201 regulator-max-microvolt = <2000000>;
334 }; 202 };
335 203
336 vreg_l9c_2p9: ldo9 { 204 vreg_l9c_2p9: ldo9 {
337 regulator-min-microvol 205 regulator-min-microvolt = <2960000>;
338 regulator-max-microvol 206 regulator-max-microvolt = <2960000>;
339 }; 207 };
340 208
341 vreg_l10c_0p8: ldo10 { 209 vreg_l10c_0p8: ldo10 {
342 regulator-min-microvol 210 regulator-min-microvolt = <720000>;
343 regulator-max-microvol 211 regulator-max-microvolt = <1050000>;
344 }; 212 };
345 213
346 vreg_l11c_2p8: ldo11 { 214 vreg_l11c_2p8: ldo11 {
347 regulator-min-microvol 215 regulator-min-microvolt = <2800000>;
348 regulator-max-microvol 216 regulator-max-microvolt = <3544000>;
349 }; 217 };
350 218
351 vreg_l12c_1p8: ldo12 { 219 vreg_l12c_1p8: ldo12 {
352 regulator-min-microvol 220 regulator-min-microvolt = <1650000>;
353 regulator-max-microvol 221 regulator-max-microvolt = <2000000>;
354 }; 222 };
355 223
356 vreg_l13c_3p0: ldo13 { 224 vreg_l13c_3p0: ldo13 {
357 regulator-min-microvol 225 regulator-min-microvolt = <2700000>;
358 regulator-max-microvol 226 regulator-max-microvolt = <3544000>;
359 }; 227 };
360 228
361 vreg_bob: bob { 229 vreg_bob: bob {
362 regulator-min-microvol 230 regulator-min-microvolt = <3008000>;
363 regulator-max-microvol 231 regulator-max-microvolt = <3960000>;
364 }; 232 };
365 }; 233 };
366 }; 234 };
367 235
368 &gpi_dma0 { 236 &gpi_dma0 {
369 status = "okay"; 237 status = "okay";
370 }; 238 };
371 239
372 &gpi_dma1 { 240 &gpi_dma1 {
373 status = "okay"; 241 status = "okay";
374 }; 242 };
375 243
376 &lpass_cpu { !! 244 &ipa {
377 status = "okay"; <<
378 <<
379 pinctrl-names = "default"; <<
380 pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sc <<
381 <<
382 dai-link@1 { <<
383 reg = <MI2S_SECONDARY>; <<
384 qcom,playback-sd-lines = <0>; <<
385 }; <<
386 <<
387 dai-link@5 { <<
388 reg = <LPASS_DP_RX>; <<
389 }; <<
390 <<
391 dai-link@6 { <<
392 reg = <LPASS_CDC_DMA_RX0>; <<
393 }; <<
394 <<
395 dai-link@19 { <<
396 reg = <LPASS_CDC_DMA_TX3>; <<
397 }; <<
398 <<
399 dai-link@25 { <<
400 reg = <LPASS_CDC_DMA_VA_TX0>; <<
401 }; <<
402 }; <<
403 <<
404 &lpass_rx_macro { <<
405 status = "okay"; <<
406 }; <<
407 <<
408 &lpass_tx_macro { <<
409 status = "okay"; <<
410 }; <<
411 <<
412 &lpass_va_macro { <<
413 status = "okay"; 245 status = "okay";
414 vdd-micb-supply = <&vreg_bob>; !! 246 modem-init;
415 }; 247 };
416 248
417 &pcie1 { 249 &pcie1 {
418 status = "okay"; 250 status = "okay";
419 perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW !! 251 perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
420 252
421 vddpe-3v3-supply = <&nvme_3v3_regulato 253 vddpe-3v3-supply = <&nvme_3v3_regulator>;
422 254
423 pinctrl-names = "default"; 255 pinctrl-names = "default";
424 pinctrl-0 = <&pcie1_reset_n>, <&pcie1_ 256 pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
425 }; 257 };
426 258
427 &pcie1_phy { 259 &pcie1_phy {
428 status = "okay"; 260 status = "okay";
429 261
430 vdda-phy-supply = <&vreg_l10c_0p8>; 262 vdda-phy-supply = <&vreg_l10c_0p8>;
431 vdda-pll-supply = <&vreg_l6b_1p2>; 263 vdda-pll-supply = <&vreg_l6b_1p2>;
432 }; 264 };
433 265
434 &pmk8350_vadc { 266 &pmk8350_vadc {
435 channel@3 { !! 267 pmk8350-die-temp@3 {
436 reg = <PMK8350_ADC7_DIE_TEMP>; 268 reg = <PMK8350_ADC7_DIE_TEMP>;
437 label = "pmk8350_die_temp"; 269 label = "pmk8350_die_temp";
438 qcom,pre-scaling = <1 1>; 270 qcom,pre-scaling = <1 1>;
439 }; 271 };
440 }; 272 };
441 273
442 &qfprom { 274 &qfprom {
443 vcc-supply = <&vreg_l1c_1p8>; 275 vcc-supply = <&vreg_l1c_1p8>;
444 }; 276 };
445 277
446 &qupv3_id_0 { 278 &qupv3_id_0 {
447 status = "okay"; 279 status = "okay";
448 }; 280 };
449 281
450 &qupv3_id_1 { 282 &qupv3_id_1 {
451 status = "okay"; 283 status = "okay";
452 }; 284 };
453 285
454 &sdhc_1 { 286 &sdhc_1 {
455 status = "okay"; 287 status = "okay";
456 288
457 non-removable; 289 non-removable;
458 no-sd; 290 no-sd;
459 no-sdio; 291 no-sdio;
460 292
461 vmmc-supply = <&vreg_l7b_2p9>; 293 vmmc-supply = <&vreg_l7b_2p9>;
462 vqmmc-supply = <&vreg_l19b_1p8>; 294 vqmmc-supply = <&vreg_l19b_1p8>;
463 }; 295 };
464 296
465 &sdhc_2 { 297 &sdhc_2 {
466 status = "okay"; 298 status = "okay";
467 299
468 pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, 300 pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
469 pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_ 301 pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
470 302
471 vmmc-supply = <&vreg_l9c_2p9>; 303 vmmc-supply = <&vreg_l9c_2p9>;
472 vqmmc-supply = <&vreg_l6c_2p9>; 304 vqmmc-supply = <&vreg_l6c_2p9>;
473 305
474 cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; 306 cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
475 }; 307 };
476 308
477 &swr0 { <<
478 status = "okay"; <<
479 <<
480 wcd_rx: codec@0,4 { <<
481 compatible = "sdw20217010d00"; <<
482 reg = <0 4>; <<
483 qcom,rx-port-mapping = <1 2 3 <<
484 }; <<
485 }; <<
486 <<
487 &swr1 { <<
488 status = "okay"; <<
489 <<
490 wcd_tx: codec@0,3 { <<
491 compatible = "sdw20217010d00"; <<
492 reg = <0 3>; <<
493 qcom,tx-port-mapping = <1 2 3 <<
494 }; <<
495 }; <<
496 <<
497 &uart5 { 309 &uart5 {
498 status = "okay"; !! 310 compatible = "qcom,geni-debug-uart";
499 }; <<
500 <<
501 &ufs_mem_hc { <<
502 reset-gpios = <&tlmm 175 GPIO_ACTIVE_L <<
503 vcc-supply = <&vreg_l7b_2p9>; <<
504 vcc-max-microamp = <800000>; <<
505 vccq-supply = <&vreg_l9b_1p2>; <<
506 vccq-max-microamp = <900000>; <<
507 vccq2-supply = <&vreg_l9b_1p2>; <<
508 vccq2-max-microamp = <900000>; <<
509 <<
510 status = "okay"; <<
511 }; <<
512 <<
513 &ufs_mem_phy { <<
514 vdda-phy-supply = <&vreg_l10c_0p8>; <<
515 vdda-pll-supply = <&vreg_l6b_1p2>; <<
516 <<
517 status = "okay"; 311 status = "okay";
518 }; 312 };
519 313
520 &usb_1 { 314 &usb_1 {
521 status = "okay"; 315 status = "okay";
522 }; 316 };
523 317
524 &usb_1_dwc3 { 318 &usb_1_dwc3 {
525 dr_mode = "host"; 319 dr_mode = "host";
526 }; 320 };
527 321
528 &usb_1_hsphy { 322 &usb_1_hsphy {
529 status = "okay"; 323 status = "okay";
530 324
531 vdda-pll-supply = <&vreg_l10c_0p8>; 325 vdda-pll-supply = <&vreg_l10c_0p8>;
532 vdda33-supply = <&vreg_l2b_3p0>; 326 vdda33-supply = <&vreg_l2b_3p0>;
533 vdda18-supply = <&vreg_l1c_1p8>; 327 vdda18-supply = <&vreg_l1c_1p8>;
534 qcom,hs-rise-fall-time-bp = <0>; <<
535 qcom,squelch-detector-bp = <(-2090)>; <<
536 qcom,hs-disconnect-bp = <1743>; <<
537 qcom,hs-amplitude-bp = <1780>; <<
538 qcom,hs-crossover-voltage-microvolt = <<
539 qcom,hs-output-impedance-micro-ohms = <<
540 }; 328 };
541 329
542 &usb_1_qmpphy { 330 &usb_1_qmpphy {
543 status = "okay"; 331 status = "okay";
544 332
545 vdda-phy-supply = <&vreg_l6b_1p2>; 333 vdda-phy-supply = <&vreg_l6b_1p2>;
546 vdda-pll-supply = <&vreg_l1b_0p8>; 334 vdda-pll-supply = <&vreg_l1b_0p8>;
547 }; 335 };
548 336
549 &uart7 { 337 &uart7 {
550 status = "okay"; 338 status = "okay";
551 339
552 /delete-property/interrupts; 340 /delete-property/interrupts;
553 interrupts-extended = <&intc GIC_SPI 6 341 interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
554 <&tlmm 31 IRQ_ 342 <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
555 pinctrl-names = "default", "sleep"; 343 pinctrl-names = "default", "sleep";
556 pinctrl-1 = <&qup_uart7_sleep_cts>, <& 344 pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
557 345
558 bluetooth: bluetooth { 346 bluetooth: bluetooth {
559 compatible = "qcom,wcn6750-bt" 347 compatible = "qcom,wcn6750-bt";
560 pinctrl-names = "default"; 348 pinctrl-names = "default";
561 pinctrl-0 = <&bt_en>, <&sw_ctr 349 pinctrl-0 = <&bt_en>, <&sw_ctrl>;
562 enable-gpios = <&tlmm 85 GPIO_ 350 enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
563 swctrl-gpios = <&tlmm 86 GPIO_ 351 swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
564 vddaon-supply = <&vreg_s7b_0p9 352 vddaon-supply = <&vreg_s7b_0p9>;
565 vddbtcxmx-supply = <&vreg_s7b_ 353 vddbtcxmx-supply = <&vreg_s7b_0p9>;
566 vddrfacmn-supply = <&vreg_s7b_ 354 vddrfacmn-supply = <&vreg_s7b_0p9>;
567 vddrfa0p8-supply = <&vreg_s7b_ 355 vddrfa0p8-supply = <&vreg_s7b_0p9>;
568 vddrfa1p7-supply = <&vreg_s1b_ 356 vddrfa1p7-supply = <&vreg_s1b_1p8>;
569 vddrfa1p2-supply = <&vreg_s8b_ 357 vddrfa1p2-supply = <&vreg_s8b_1p2>;
570 vddrfa2p2-supply = <&vreg_s1c_ 358 vddrfa2p2-supply = <&vreg_s1c_2p2>;
571 vddasd-supply = <&vreg_l11c_2p 359 vddasd-supply = <&vreg_l11c_2p8>;
572 max-speed = <3200000>; 360 max-speed = <3200000>;
573 }; 361 };
574 }; 362 };
575 363
576 /* PINCTRL - additions to nodes defined in sc7 364 /* PINCTRL - additions to nodes defined in sc7280.dtsi */
577 365
578 &dp_hot_plug_det { 366 &dp_hot_plug_det {
579 bias-disable; 367 bias-disable;
580 }; 368 };
581 369
582 &lpass_dmic01_clk { 370 &lpass_dmic01_clk {
583 drive-strength = <8>; 371 drive-strength = <8>;
584 bias-disable; 372 bias-disable;
585 }; 373 };
586 374
>> 375 &lpass_dmic01_clk_sleep {
>> 376 drive-strength = <2>;
>> 377 };
>> 378
587 &lpass_dmic01_data { 379 &lpass_dmic01_data {
588 bias-pull-down; 380 bias-pull-down;
589 }; 381 };
590 382
591 &lpass_dmic23_clk { 383 &lpass_dmic23_clk {
592 drive-strength = <8>; 384 drive-strength = <8>;
593 bias-disable; 385 bias-disable;
594 }; 386 };
595 387
>> 388 &lpass_dmic23_clk_sleep {
>> 389 drive-strength = <2>;
>> 390 };
>> 391
596 &lpass_dmic23_data { 392 &lpass_dmic23_data {
597 bias-pull-down; 393 bias-pull-down;
598 }; 394 };
599 395
600 &lpass_rx_swr_clk { 396 &lpass_rx_swr_clk {
601 drive-strength = <2>; 397 drive-strength = <2>;
602 slew-rate = <1>; 398 slew-rate = <1>;
603 bias-disable; 399 bias-disable;
604 }; 400 };
605 401
>> 402 &lpass_rx_swr_clk_sleep {
>> 403 bias-pull-down;
>> 404 };
>> 405
606 &lpass_rx_swr_data { 406 &lpass_rx_swr_data {
607 drive-strength = <2>; 407 drive-strength = <2>;
608 slew-rate = <1>; 408 slew-rate = <1>;
609 bias-bus-hold; 409 bias-bus-hold;
610 }; 410 };
611 411
>> 412 &lpass_rx_swr_data_sleep {
>> 413 bias-pull-down;
>> 414 };
>> 415
612 &lpass_tx_swr_clk { 416 &lpass_tx_swr_clk {
613 drive-strength = <2>; 417 drive-strength = <2>;
614 slew-rate = <1>; 418 slew-rate = <1>;
615 bias-disable; 419 bias-disable;
616 }; 420 };
617 421
>> 422 &lpass_tx_swr_clk_sleep {
>> 423 bias-pull-down;
>> 424 };
>> 425
618 &lpass_tx_swr_data { 426 &lpass_tx_swr_data {
619 drive-strength = <2>; 427 drive-strength = <2>;
620 slew-rate = <1>; 428 slew-rate = <1>;
621 bias-bus-hold; 429 bias-bus-hold;
622 }; 430 };
623 431
624 &mi2s1_data0 { 432 &mi2s1_data0 {
625 drive-strength = <6>; 433 drive-strength = <6>;
626 bias-disable; 434 bias-disable;
627 }; 435 };
628 436
629 &mi2s1_sclk { 437 &mi2s1_sclk {
630 drive-strength = <6>; 438 drive-strength = <6>;
631 bias-disable; 439 bias-disable;
632 }; 440 };
633 441
634 &mi2s1_ws { 442 &mi2s1_ws {
635 drive-strength = <6>; 443 drive-strength = <6>;
636 }; 444 };
637 445
638 &pm7325_gpios { 446 &pm7325_gpios {
639 key_vol_up_default: key-vol-up-state { 447 key_vol_up_default: key-vol-up-state {
640 pins = "gpio6"; 448 pins = "gpio6";
641 function = "normal"; 449 function = "normal";
642 input-enable; 450 input-enable;
643 bias-pull-up; 451 bias-pull-up;
644 power-source = <0>; 452 power-source = <0>;
645 qcom,drive-strength = <3>; 453 qcom,drive-strength = <3>;
646 }; 454 };
647 }; 455 };
648 456
649 &pcie1_clkreq_n { 457 &pcie1_clkreq_n {
650 bias-pull-up; 458 bias-pull-up;
651 drive-strength = <2>; 459 drive-strength = <2>;
652 }; 460 };
653 461
654 &qspi_cs0 { 462 &qspi_cs0 {
655 bias-disable; /* External pu !! 463 bias-disable;
656 }; 464 };
657 465
658 &qspi_clk { 466 &qspi_clk {
659 bias-pull-down; /* No external !! 467 bias-disable;
660 }; <<
661 <<
662 &qspi_data0 { <<
663 bias-pull-down; /* No external <<
664 }; 468 };
665 469
666 &qspi_data1 { !! 470 &qspi_data01 {
667 bias-pull-down; /* No external !! 471 /* High-Z when no transfers; nice to park the lines */
>> 472 bias-pull-up;
668 }; 473 };
669 474
670 &qup_uart5_tx { 475 &qup_uart5_tx {
671 drive-strength = <2>; 476 drive-strength = <2>;
672 bias-disable; 477 bias-disable;
673 }; 478 };
674 479
675 &qup_uart5_rx { 480 &qup_uart5_rx {
676 drive-strength = <2>; 481 drive-strength = <2>;
677 bias-pull-up; 482 bias-pull-up;
678 }; 483 };
679 484
680 &qup_uart7_cts { 485 &qup_uart7_cts {
681 /* 486 /*
682 * Configure a bias-bus-hold on CTS to 487 * Configure a bias-bus-hold on CTS to lower power
683 * usage when Bluetooth is turned off. 488 * usage when Bluetooth is turned off. Bus hold will
684 * maintain a low power state regardle 489 * maintain a low power state regardless of whether
685 * the Bluetooth module drives the pin 490 * the Bluetooth module drives the pin in either
686 * direction or leaves the pin fully u 491 * direction or leaves the pin fully unpowered.
687 */ 492 */
688 bias-bus-hold; 493 bias-bus-hold;
689 }; 494 };
690 495
691 &qup_uart7_rts { 496 &qup_uart7_rts {
692 /* We'll drive RTS, so no pull */ 497 /* We'll drive RTS, so no pull */
693 drive-strength = <2>; 498 drive-strength = <2>;
694 bias-disable; 499 bias-disable;
695 }; 500 };
696 501
697 &qup_uart7_tx { 502 &qup_uart7_tx {
698 /* We'll drive TX, so no pull */ 503 /* We'll drive TX, so no pull */
699 drive-strength = <2>; 504 drive-strength = <2>;
700 bias-disable; 505 bias-disable;
701 }; 506 };
702 507
703 &qup_uart7_rx { 508 &qup_uart7_rx {
704 /* 509 /*
705 * Configure a pull-up on RX. This is 510 * Configure a pull-up on RX. This is needed to avoid
706 * garbage data when the TX pin of the 511 * garbage data when the TX pin of the Bluetooth module is
707 * in tri-state (module powered off or 512 * in tri-state (module powered off or not driving the
708 * signal yet). 513 * signal yet).
709 */ 514 */
710 bias-pull-up; 515 bias-pull-up;
711 }; 516 };
712 517
713 &sdc1_clk { 518 &sdc1_clk {
714 bias-disable; 519 bias-disable;
715 drive-strength = <16>; 520 drive-strength = <16>;
716 }; 521 };
717 522
718 &sdc1_cmd { 523 &sdc1_cmd {
719 bias-pull-up; 524 bias-pull-up;
720 drive-strength = <10>; 525 drive-strength = <10>;
721 }; 526 };
722 527
723 &sdc1_data { 528 &sdc1_data {
724 bias-pull-up; 529 bias-pull-up;
725 drive-strength = <10>; 530 drive-strength = <10>;
726 }; 531 };
727 532
728 &sdc1_rclk { 533 &sdc1_rclk {
729 bias-pull-down; 534 bias-pull-down;
730 }; 535 };
731 536
732 &sdc2_clk { 537 &sdc2_clk {
733 bias-disable; 538 bias-disable;
734 drive-strength = <16>; 539 drive-strength = <16>;
735 }; 540 };
736 541
737 &sdc2_cmd { 542 &sdc2_cmd {
738 bias-pull-up; 543 bias-pull-up;
739 drive-strength = <10>; 544 drive-strength = <10>;
740 }; 545 };
741 546
742 &sdc2_data { 547 &sdc2_data {
743 bias-pull-up; 548 bias-pull-up;
744 drive-strength = <10>; 549 drive-strength = <10>;
745 }; 550 };
746 551
747 &tlmm { 552 &tlmm {
748 amp_en: amp-en-state { !! 553 bt_en: bt-en {
749 pins = "gpio63"; <<
750 function = "gpio"; <<
751 bias-pull-down; <<
752 drive-strength = <2>; <<
753 }; <<
754 <<
755 bt_en: bt-en-state { <<
756 pins = "gpio85"; 554 pins = "gpio85";
757 function = "gpio"; 555 function = "gpio";
758 output-low; 556 output-low;
759 bias-disable; 557 bias-disable;
760 }; 558 };
761 559
762 nvme_pwren: nvme-pwren-state { !! 560 nvme_pwren: nvme-pwren {
763 function = "gpio"; 561 function = "gpio";
764 }; 562 };
765 563
766 pcie1_reset_n: pcie1-reset-n-state { !! 564 pcie1_reset_n: pcie1-reset-n {
767 pins = "gpio2"; 565 pins = "gpio2";
768 function = "gpio"; 566 function = "gpio";
769 567
770 drive-strength = <16>; 568 drive-strength = <16>;
771 output-low; 569 output-low;
772 bias-disable; 570 bias-disable;
773 }; 571 };
774 572
775 pcie1_wake_n: pcie1-wake-n-state { !! 573 pcie1_wake_n: pcie1-wake-n {
776 pins = "gpio3"; 574 pins = "gpio3";
777 function = "gpio"; 575 function = "gpio";
778 576
779 drive-strength = <2>; 577 drive-strength = <2>;
780 bias-pull-up; 578 bias-pull-up;
781 }; 579 };
782 580
783 qup_uart7_sleep_cts: qup-uart7-sleep-c !! 581 qup_uart7_sleep_cts: qup-uart7-sleep-cts {
784 pins = "gpio28"; 582 pins = "gpio28";
785 function = "gpio"; 583 function = "gpio";
786 /* 584 /*
787 * Configure a bias-bus-hold o 585 * Configure a bias-bus-hold on CTS to lower power
788 * usage when Bluetooth is tur 586 * usage when Bluetooth is turned off. Bus hold will
789 * maintain a low power state 587 * maintain a low power state regardless of whether
790 * the Bluetooth module drives 588 * the Bluetooth module drives the pin in either
791 * direction or leaves the pin 589 * direction or leaves the pin fully unpowered.
792 */ 590 */
793 bias-bus-hold; 591 bias-bus-hold;
794 }; 592 };
795 593
796 qup_uart7_sleep_rts: qup-uart7-sleep-r !! 594 qup_uart7_sleep_rts: qup-uart7-sleep-rts {
797 pins = "gpio29"; 595 pins = "gpio29";
798 function = "gpio"; 596 function = "gpio";
799 /* 597 /*
800 * Configure pull-down on RTS. 598 * Configure pull-down on RTS. As RTS is active low
801 * signal, pull it low to indi 599 * signal, pull it low to indicate the BT SoC that it
802 * can wakeup the system anyti 600 * can wakeup the system anytime from suspend state by
803 * pulling RX low (by sending 601 * pulling RX low (by sending wakeup bytes).
804 */ 602 */
805 bias-pull-down; 603 bias-pull-down;
806 }; 604 };
807 605
808 qup_uart7_sleep_tx: qup-uart7-sleep-tx !! 606 qup_uart7_sleep_tx: qup-uart7-sleep-tx {
809 pins = "gpio30"; 607 pins = "gpio30";
810 function = "gpio"; 608 function = "gpio";
811 /* 609 /*
812 * Configure pull-up on TX whe 610 * Configure pull-up on TX when it isn't actively driven
813 * to prevent BT SoC from rece 611 * to prevent BT SoC from receiving garbage during sleep.
814 */ 612 */
815 bias-pull-up; 613 bias-pull-up;
816 }; 614 };
817 615
818 qup_uart7_sleep_rx: qup-uart7-sleep-rx !! 616 qup_uart7_sleep_rx: qup-uart7-sleep-rx {
819 pins = "gpio31"; 617 pins = "gpio31";
820 function = "gpio"; 618 function = "gpio";
821 /* 619 /*
822 * Configure a pull-up on RX. 620 * Configure a pull-up on RX. This is needed to avoid
823 * garbage data when the TX pi 621 * garbage data when the TX pin of the Bluetooth module
824 * is floating which may cause 622 * is floating which may cause spurious wakeups.
825 */ 623 */
826 bias-pull-up; 624 bias-pull-up;
827 }; 625 };
828 626
829 sd_cd: sd-cd-state { !! 627 sd_cd: sd-cd {
830 pins = "gpio91"; 628 pins = "gpio91";
831 function = "gpio"; 629 function = "gpio";
832 bias-pull-up; 630 bias-pull-up;
833 }; 631 };
834 632
835 sw_ctrl: sw-ctrl-state { !! 633 sw_ctrl: sw-ctrl {
836 pins = "gpio86"; 634 pins = "gpio86";
837 function = "gpio"; 635 function = "gpio";
838 bias-pull-down; 636 bias-pull-down;
839 }; <<
840 <<
841 wcd_reset_n: wcd-reset-n-state { <<
842 pins = "gpio83"; <<
843 function = "gpio"; <<
844 drive-strength = <8>; <<
845 }; <<
846 <<
847 wcd_reset_n_sleep: wcd-reset-n-sleep-s <<
848 pins = "gpio83"; <<
849 function = "gpio"; <<
850 drive-strength = <8>; <<
851 bias-disable; <<
852 }; 637 };
853 }; 638 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.