1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2017-2019, The Linux Foundati
4 * Copyright (c) 2020-2023, Linaro Limited
5 */
6
7 /dts-v1/;
8
9 #include <dt-bindings/firmware/qcom,scm.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/regulator/qcom,rpmh-regu
14 #include "sc8180x.dtsi"
15 #include "sc8180x-pmics.dtsi"
16
17 / {
18 model = "Qualcomm SC8180x Primus";
19 compatible = "qcom,sc8180x-primus", "q
20
21 aliases {
22 serial0 = &uart12;
23 serial1 = &uart13;
24 };
25
26 backlight: backlight {
27 compatible = "pwm-backlight";
28 pwms = <&pmc8180c_lpg 4 100000
29 enable-gpios = <&pmc8180c_gpio
30
31 pinctrl-names = "default";
32 pinctrl-0 = <&bl_pwm_default>;
33 };
34
35 chosen {
36 stdout-path = "serial0:115200n
37 };
38
39 gpio-keys {
40 compatible = "gpio-keys";
41
42 pinctrl-names = "default";
43 pinctrl-0 = <&hall_int_active_
44
45 lid-switch {
46 gpios = <&tlmm 121 GPI
47 linux,input-type = <EV
48 linux,code = <SW_LID>;
49 wakeup-source;
50 wakeup-event-action =
51 };
52 };
53
54 pmic-glink {
55 compatible = "qcom,sc8180x-pmi
56
57 #address-cells = <1>;
58 #size-cells = <0>;
59
60 connector@0 {
61 compatible = "usb-c-co
62 reg = <0>;
63 power-role = "dual";
64 data-role = "dual";
65
66 ports {
67 #address-cells
68 #size-cells =
69
70 port@0 {
71 reg =
72
73 pmic_g
74
75 };
76 };
77
78 port@1 {
79 reg =
80
81 pmic_g
82
83 };
84 };
85
86 port@2 {
87 reg =
88
89 pmic_g
90
91 };
92 };
93 };
94 };
95
96 connector@1 {
97 compatible = "usb-c-co
98 reg = <1>;
99 power-role = "dual";
100 data-role = "dual";
101
102 ports {
103 #address-cells
104 #size-cells =
105 port@0 {
106 reg =
107
108 pmic_g
109
110 };
111 };
112
113 port@1 {
114 reg =
115
116 pmic_g
117
118 };
119 };
120
121 port@2 {
122 reg =
123
124 pmic_g
125
126 };
127 };
128 };
129 };
130 };
131
132 reserved-memory {
133 rmtfs_mem: rmtfs-region@855000
134 compatible = "qcom,rmt
135 reg = <0x0 0x85500000
136 no-map;
137
138 qcom,client-id = <1>;
139 qcom,vmid = <QCOM_SCM_
140 };
141
142 wlan_mem: wlan-region@8bc00000
143 reg = <0x0 0x8bc00000
144 no-map;
145 };
146
147 adsp_mem: adsp-region@96e00000
148 reg = <0x0 0x96e00000
149 no-map;
150 };
151
152 mpss_mem: mpss-region@8d800000
153 reg = <0x0 0x8d800000
154 no-map;
155 };
156
157 gpu_mem: gpu-region@98a00000 {
158 reg = <0x0 0x98a00000
159 no-map;
160 };
161
162 reserved-region@9a500000 {
163 reg = <0x0 0x9a500000
164 no-map;
165 };
166 };
167
168 vreg_nvme_0p9: nvme-0p9-regulator {
169 compatible = "regulator-fixed"
170 regulator-name = "vreg_nvme_0p
171
172 regulator-min-microvolt = <900
173 regulator-max-microvolt = <900
174
175 regulator-always-on;
176 };
177
178 vreg_nvme_3p3: nvme-3p3-regulator {
179 compatible = "regulator-fixed"
180 regulator-name = "vreg_nvme_3p
181
182 regulator-min-microvolt = <330
183 regulator-max-microvolt = <330
184
185 gpio = <&pmc8180c_gpios 11 0>;
186 enable-active-high;
187
188 regulator-always-on;
189 };
190
191 vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator
192 compatible = "regulator-fixed"
193 regulator-name = "vdd_kb_tp_3v
194 regulator-min-microvolt = <330
195 regulator-max-microvolt = <330
196
197 gpio = <&tlmm 4 GPIO_ACTIVE_HI
198 enable-active-high;
199
200 regulator-always-on;
201
202 pinctrl-names = "default";
203 pinctrl-0 = <&kb_tp_3v3_en_act
204 };
205
206 vph_pwr: vph-pwr-regulator {
207 compatible = "regulator-fixed"
208 regulator-name = "vph_pwr";
209 regulator-min-microvolt = <370
210 regulator-max-microvolt = <370
211 };
212
213 vreg_s4a_1p8: pm8150-s4 {
214 compatible = "regulator-fixed"
215 regulator-name = "vreg_s4a_1p8
216
217 regulator-min-microvolt = <180
218 regulator-max-microvolt = <180
219
220 regulator-always-on;
221 regulator-boot-on;
222
223 vin-supply = <&vph_pwr>;
224 };
225
226 vreg_usb2_host_en: regulator-usb2-host
227 compatible = "regulator-fixed"
228 regulator-name = "usb2_host_en
229
230 regulator-min-microvolt = <500
231 regulator-max-microvolt = <500
232
233 gpio = <&pmc8180_1_gpios 9 GPI
234 enable-active-high;
235
236 regulator-always-on;
237 };
238
239 vreg_usb3_host_en: regulator-usb3-host
240 compatible = "regulator-fixed"
241 regulator-name = "usb3_host_en
242
243 regulator-min-microvolt = <500
244 regulator-max-microvolt = <500
245
246 gpio = <&pmc8180_2_gpios 9 GPI
247 enable-active-high;
248
249 regulator-always-on;
250 };
251
252 usbprim-sbu-mux {
253 compatible = "pericom,pi3usb10
254
255 enable-gpios = <&tlmm 152 GPIO
256 select-gpios = <&tlmm 100 GPIO
257
258 pinctrl-names = "default";
259 pinctrl-0 = <&usbprim_sbu_defa
260
261 mode-switch;
262 orientation-switch;
263
264 port {
265 usbprim_sbu_mux: endpo
266 remote-endpoin
267 };
268 };
269 };
270
271 usbsec-sbu-mux {
272 compatible = "pericom,pi3usb10
273
274 enable-gpios = <&tlmm 188 GPIO
275 select-gpios = <&tlmm 187 GPIO
276
277 pinctrl-names = "default";
278 pinctrl-0 = <&usbsec_sbu_defau
279
280 mode-switch;
281 orientation-switch;
282
283 port {
284 usbsec_sbu_mux: endpoi
285 remote-endpoin
286 };
287 };
288 };
289 };
290
291 &apps_rsc {
292 regulators-0 {
293 compatible = "qcom,pmc8180-rpm
294 qcom,pmic-id = "a";
295
296 vdd-s5-supply = <&vph_pwr>;
297 vdd-l7-l12-l14-l15-supply = <&
298
299 vreg_s5a_2p0: smps5 {
300 regulator-min-microvol
301 regulator-max-microvol
302 };
303
304 vreg_l7a_1p8: ldo7 {
305 regulator-min-microvol
306 regulator-max-microvol
307 regulator-initial-mode
308 };
309
310 vreg_l9a_1p3: ldo9 {
311 regulator-min-microvol
312 regulator-max-microvol
313 regulator-initial-mode
314 };
315
316 vreg_l12a_1p8: ldo12 {
317 regulator-min-microvol
318 regulator-max-microvol
319 regulator-initial-mode
320 };
321 };
322
323 regulators-1 {
324 compatible = "qcom,pmc8180c-rp
325 qcom,pmic-id = "c";
326
327 vdd-s6-supply = <&vph_pwr>;
328 vdd-s8-supply = <&vph_pwr>;
329 vdd-l2-l3-supply = <&vreg_s6c_
330 vdd-bob-supply = <&vph_pwr>;
331
332 vreg_s6c_1p35: smps6 {
333 regulator-min-microvol
334 regulator-max-microvol
335 regulator-initial-mode
336 };
337
338 vreg_s8c_1p8: smps8 {
339 regulator-min-microvol
340 regulator-max-microvol
341 regulator-initial-mode
342 regulator-always-on;
343 };
344
345 vreg_l3c_1p2: ldo3 {
346 regulator-min-microvol
347 regulator-max-microvol
348 regulator-initial-mode
349 };
350
351 vreg_l4c_3p3: ldo4 {
352 regulator-min-microvol
353 regulator-max-microvol
354 regulator-initial-mode
355 };
356
357 vreg_l10c_3p3: ldo10 {
358 regulator-min-microvol
359 regulator-max-microvol
360 regulator-initial-mode
361 };
362
363 vreg_l11c_3p3: ldo11 {
364 regulator-min-microvol
365 regulator-max-microvol
366 regulator-initial-mode
367 };
368
369 vreg_bob: bob {
370 regulator-min-microvol
371 regulator-max-microvol
372 regulator-initial-mode
373 };
374 };
375
376 regulators-2 {
377 compatible = "qcom,pmc8180-rpm
378 qcom,pmic-id = "e";
379
380 vdd-s4-supply = <&vph_pwr>;
381 vdd-s5-supply = <&vph_pwr>;
382 vdd-l2-l10-supply = <&vreg_bob
383 vdd-l3-l4-l5-l18-supply = <&vr
384 vdd-l7-l12-l14-l15-supply = <&
385 vdd-l13-l16-l17-supply = <&vre
386
387 vreg_s4e_0p98: smps4 {
388 regulator-min-microvol
389 regulator-max-microvol
390 regulator-initial-mode
391 };
392
393 vreg_s5e_2p05: smps5 {
394 regulator-min-microvol
395 regulator-max-microvol
396 regulator-initial-mode
397 };
398
399 vreg_l1e_0p75: ldo1 {
400 regulator-min-microvol
401 regulator-max-microvol
402 regulator-initial-mode
403 };
404
405 vreg_l5e_0p88: ldo5 {
406 regulator-min-microvol
407 regulator-max-microvol
408 regulator-initial-mode
409 };
410
411 vreg_l7e_1p8: ldo7 {
412 regulator-min-microvol
413 regulator-max-microvol
414 regulator-initial-mode
415 regulator-allowed-mode
416
417 regulator-allow-set-lo
418 };
419
420 vreg_l10e_2p9: ldo10 {
421 regulator-min-microvol
422 regulator-max-microvol
423 regulator-initial-mode
424 regulator-allowed-mode
425
426 regulator-allow-set-lo
427 };
428
429 vreg_l12e: ldo12 {
430 regulator-min-microvol
431 regulator-max-microvol
432 regulator-initial-mode
433 };
434
435 vreg_l16e_3p0: ldo16 {
436 regulator-min-microvol
437 regulator-max-microvol
438 regulator-initial-mode
439 };
440 };
441 };
442
443 &gpu {
444 status = "okay";
445
446 zap-shader {
447 memory-region = <&gpu_mem>;
448 firmware-name = "qcom/sc8180x/
449 };
450 };
451
452 &i2c1 {
453 clock-frequency = <100000>;
454
455 pinctrl-names = "default";
456 pinctrl-0 = <&ts_i2c_active_state>;
457
458 status = "okay";
459
460 touchscreen@10 {
461 compatible = "hid-over-i2c";
462 reg = <0x10>;
463 hid-descr-addr = <0x1>;
464
465 vdd-supply = <&vreg_l4c_3p3>;
466 vddl-supply = <&vreg_l12e>;
467
468 post-power-on-delay-ms = <20>;
469
470 interrupts-extended = <&tlmm 1
471
472 pinctrl-names = "default";
473 pinctrl-0 = <&ts_active_state>
474 };
475 };
476
477 &i2c7 {
478 clock-frequency = <100000>;
479
480 pinctrl-names = "default";
481 pinctrl-0 = <&aux_i2c_active_state>;
482
483 status = "okay";
484
485 touchpad@15 {
486 compatible = "hid-over-i2c";
487 reg = <0x15>;
488 hid-descr-addr = <0x1>;
489
490 interrupts-extended = <&tlmm 2
491
492 pinctrl-names = "default";
493 pinctrl-0 = <&tp_int_active_st
494
495 vdd-supply = <&vdd_kb_tp_3v3>;
496 };
497
498 keyboard@3a {
499 compatible = "hid-over-i2c";
500 reg = <0x3a>;
501 hid-descr-addr = <0x1>;
502 interrupts-extended = <&tlmm 3
503
504 pinctrl-names = "default";
505 pinctrl-0 = <&kb_int_active_st
506
507 vdd-supply = <&vdd_kb_tp_3v3>;
508 };
509 };
510
511 &mdss {
512 status = "okay";
513 };
514
515 &mdss_dp0 {
516 status = "okay";
517 };
518
519 &mdss_dp0_out {
520 data-lanes = <0 1>;
521 remote-endpoint = <&usb_prim_qmpphy_dp
522 };
523
524 &mdss_dp1 {
525 status = "okay";
526 };
527
528 &mdss_dp1_out {
529 data-lanes = <0 1>;
530 remote-endpoint = <&usb_sec_qmpphy_dp_
531 };
532
533 &mdss_edp {
534 data-lanes = <0 1 2 3>;
535
536 pinctrl-names = "default";
537 pinctrl-0 = <&edp_hpd_active>;
538
539 status = "okay";
540
541 aux-bus {
542 panel {
543 compatible = "edp-pane
544
545 backlight = <&backligh
546
547 port {
548 auo_b133han05_
549 remote
550 };
551 };
552 };
553 };
554
555 ports {
556 port@1 {
557 reg = <1>;
558 mdss_edp_out: endpoint
559 remote-endpoin
560 };
561 };
562 };
563 };
564
565 &pcie1 {
566 perst-gpios = <&tlmm 175 GPIO_ACTIVE_L
567 wake-gpios = <&tlmm 177 GPIO_ACTIVE_HI
568 pinctrl-names = "default";
569 pinctrl-0 = <&pcie2_default_state>;
570
571 status = "okay";
572 };
573
574 &pcie1_phy {
575 vdda-phy-supply = <&vreg_l5e_0p88>;
576 vdda-pll-supply = <&vreg_l3c_1p2>;
577
578 status = "okay";
579 };
580
581 &pmc8180_pwrkey {
582 status = "okay";
583 };
584
585 &pmc8180c_lpg {
586 status = "okay";
587 };
588
589 &qupv3_id_0 {
590 status = "okay";
591 };
592
593 &qupv3_id_1 {
594 status = "okay";
595 };
596
597 &qupv3_id_2 {
598 status = "okay";
599 };
600
601 &remoteproc_adsp {
602 memory-region = <&adsp_mem>;
603 firmware-name = "qcom/sc8180x/qcadsp81
604
605 status = "okay";
606 };
607
608 &remoteproc_mpss {
609 memory-region = <&mpss_mem>;
610 firmware-name = "qcom/sc8180x/qcmpss81
611
612 status = "okay";
613 };
614
615 &uart12 {
616 compatible = "qcom,geni-debug-uart";
617 status = "okay";
618 };
619
620 &uart13 {
621 pinctrl-names = "default";
622 pinctrl-0 = <&uart13_state>;
623
624 status = "okay";
625
626 bluetooth {
627 compatible = "qcom,wcn3998-bt"
628
629 vddio-supply = <&vreg_s4a_1p8>
630 vddxo-supply = <&vreg_l7a_1p8>
631 vddrf-supply = <&vreg_l9a_1p3>
632 vddch0-supply = <&vreg_l11c_3p
633 max-speed = <3200000>;
634 };
635 };
636
637 &ufs_mem_hc {
638 reset-gpios = <&tlmm 190 GPIO_ACTIVE_L
639
640 vcc-supply = <&vreg_l10e_2p9>;
641 vcc-max-microamp = <155000>;
642
643 vccq2-supply = <&vreg_l7e_1p8>;
644 vccq2-max-microamp = <425000>;
645
646 status = "okay";
647 };
648
649 &ufs_mem_phy {
650 vdda-phy-supply = <&vreg_l5e_0p88>;
651 vdda-pll-supply = <&vreg_l3c_1p2>;
652
653 status = "okay";
654 };
655
656 &usb_mp {
657 status = "okay";
658 };
659
660 &usb_mp_hsphy0 {
661 vdda-pll-supply = <&vreg_l5e_0p88>;
662 vdda18-supply = <&vreg_l12a_1p8>;
663 vdda33-supply = <&vreg_l16e_3p0>;
664
665 status = "okay";
666 };
667
668 &usb_mp_hsphy1 {
669 vdda-pll-supply = <&vreg_l5e_0p88>;
670 vdda18-supply = <&vreg_l12a_1p8>;
671 vdda33-supply = <&vreg_l16e_3p0>;
672
673 status = "okay";
674 };
675
676 &usb_mp_qmpphy0 {
677 vdda-phy-supply = <&vreg_l3c_1p2>;
678 vdda-pll-supply = <&vreg_l5e_0p88>;
679
680 status = "okay";
681 };
682
683 &usb_mp_qmpphy1 {
684 vdda-phy-supply = <&vreg_l3c_1p2>;
685 vdda-pll-supply = <&vreg_l5e_0p88>;
686
687 status = "okay";
688 };
689
690 &usb_prim_hsphy {
691 vdda-pll-supply = <&vreg_l5e_0p88>;
692 vdda18-supply = <&vreg_l12a_1p8>;
693 vdda33-supply = <&vreg_l16e_3p0>;
694
695 status = "okay";
696 };
697
698 &usb_prim_qmpphy {
699 vdda-phy-supply = <&vreg_l3c_1p2>;
700 vdda-pll-supply = <&vreg_l5e_0p88>;
701
702 orientation-switch;
703
704 status = "okay";
705 };
706
707 &usb_prim {
708 status = "okay";
709 };
710
711 &usb_prim_dwc3 {
712 dr_mode = "host";
713 };
714
715 &usb_prim_dwc3_hs {
716 remote-endpoint = <&pmic_glink_con0_hs
717 };
718
719 &usb_prim_qmpphy_dp_in {
720 remote-endpoint = <&mdss_dp0_out>;
721 };
722
723 &usb_prim_qmpphy_out {
724 remote-endpoint = <&pmic_glink_con0_ss
725 };
726
727 &usb_sec_hsphy {
728 vdda-pll-supply = <&vreg_l5e_0p88>;
729 vdda18-supply = <&vreg_l12a_1p8>;
730 vdda33-supply = <&vreg_l16e_3p0>;
731
732 status = "okay";
733 };
734
735 &usb_sec_qmpphy {
736 vdda-phy-supply = <&vreg_l3c_1p2>;
737 vdda-pll-supply = <&vreg_l5e_0p88>;
738
739 orientation-switch;
740
741 status = "okay";
742 };
743
744 &usb_sec_qmpphy_dp_in {
745 remote-endpoint = <&mdss_dp1_out>;
746 };
747
748 &usb_sec_qmpphy_out {
749 remote-endpoint = <&pmic_glink_con1_ss
750 };
751
752 &usb_sec {
753 status = "okay";
754 };
755
756 &usb_sec_dwc3 {
757 dr_mode = "host";
758 };
759
760 &usb_sec_dwc3_hs {
761 remote-endpoint = <&pmic_glink_con1_hs
762 };
763
764 &wifi {
765 memory-region = <&wlan_mem>;
766
767 vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75
768 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
769 vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
770 vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
771 vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
772
773 status = "okay";
774 };
775
776 &xo_board_clk {
777 clock-frequency = <38400000>;
778 };
779
780 /* PINCTRL */
781
782 &pmc8180c_gpios {
783 bl_pwm_default: bl-pwm-default-state {
784 en-pins {
785 pins = "gpio8";
786 function = "normal";
787 };
788
789 pwm-pins {
790 pins = "gpio10";
791 function = "func1";
792 };
793 };
794 };
795
796 &tlmm {
797 gpio-reserved-ranges = <0 4>, <47 4>,
798
799 aux_i2c_active_state: aux-i2c-active-s
800 pins = "gpio98", "gpio99";
801 function = "qup7";
802
803 bias-disable;
804 drive-strength = <16>;
805 };
806
807 edp_hpd_active: epd-hpd-active-state {
808 pins = "gpio10";
809 function = "edp_hot";
810 };
811
812 hall_int_active_state: hall-int-active
813 pins = "gpio121";
814 function = "gpio";
815
816 bias-disable;
817 };
818
819 kb_int_active_state: kb-int-active-sta
820 int-n-pins {
821 pins = "gpio37";
822 function = "gpio";
823
824 bias-pull-up;
825 };
826
827 kp-disable-pins {
828 pins = "gpio135";
829 function = "gpio";
830
831 output-high;
832 };
833 };
834
835 kb_tp_3v3_en_active_state: kb-tp-3v3-e
836 pins = "gpio4";
837 function = "gpio";
838
839 bias-disable;
840 };
841
842 pcie2_default_state: pcie2-default-sta
843 clkreq-pins {
844 pins = "gpio176";
845 function = "pci_e2";
846 bias-pull-up;
847 };
848
849 reset-n-pins {
850 pins = "gpio175";
851 function = "gpio";
852
853 drive-strength = <2>;
854 output-low;
855 bias-pull-down;
856 };
857
858 wake-n-pins {
859 pins = "gpio177";
860 function = "gpio";
861
862 drive-strength = <2>;
863 bias-pull-up;
864 };
865 };
866
867 usbprim_sbu_default: usbprim-sbu-state
868 oe-n-pins {
869 pins = "gpio152";
870 function = "gpio";
871 bias-disable;
872 drive-strength = <16>;
873 output-high;
874 };
875
876 sel-pins {
877 pins = "gpio100";
878 function = "gpio";
879 bias-disable;
880 drive-strength = <16>;
881 };
882 };
883
884 usbsec_sbu_default: usbsec-sbu-state {
885 oe-n-pins {
886 pins = "gpio188";
887 function = "gpio";
888 bias-disable;
889 drive-strength = <16>;
890 output-high;
891 };
892
893 sel-pins {
894 pins = "gpio187";
895 function = "gpio";
896 bias-disable;
897 drive-strength = <16>;
898 };
899 };
900
901 tp_int_active_state: tp-int-active-sta
902 tp-int-pins {
903 pins = "gpio24";
904 function = "gpio";
905
906 bias-disable;
907 };
908
909 tp-close-n-pins {
910 pins = "gpio116";
911 function = "gpio";
912
913 bias-disable;
914 };
915 };
916
917 ts_active_state: ts-active-state {
918 int-n-pins {
919 pins = "gpio122";
920 function = "gpio";
921
922 bias-disable;
923 };
924
925 reset-n-pins {
926 pins = "gpio54";
927 function = "gpio";
928
929 output-high;
930 };
931 };
932
933 ts_i2c_active_state: ts-i2c-active-sta
934 pins = "gpio114", "gpio115";
935 function = "qup1";
936
937 /* External pull up */
938 bias-disable;
939 drive-strength = <2>;
940 };
941
942 uart13_state: uart13-state {
943 cts-pins {
944 pins = "gpio43";
945 function = "qup13";
946 bias-pull-down;
947 };
948
949 rts-tx-pins {
950 pins = "gpio44", "gpio
951 function = "qup13";
952 drive-strength = <2>;
953 bias-disable;
954 };
955
956 rx-pins {
957 pins = "gpio46";
958 function = "qup13";
959 bias-pull-up;
960 };
961 };
962 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.