1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2017-2019, The Linux Foundati 3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2020-2023, Linaro Limited 4 * Copyright (c) 2020-2023, Linaro Limited
5 */ 5 */
6 6
7 /dts-v1/; 7 /dts-v1/;
8 8
9 #include <dt-bindings/firmware/qcom,scm.h> 9 #include <dt-bindings/firmware/qcom,scm.h>
10 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/gpio-keys.h> 11 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/input/input.h> 12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/regulator/qcom,rpmh-regu 13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
14 #include "sc8180x.dtsi" 14 #include "sc8180x.dtsi"
15 #include "sc8180x-pmics.dtsi" 15 #include "sc8180x-pmics.dtsi"
16 16
17 / { 17 / {
18 model = "Qualcomm SC8180x Primus"; 18 model = "Qualcomm SC8180x Primus";
19 compatible = "qcom,sc8180x-primus", "q 19 compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
20 20
21 aliases { 21 aliases {
22 serial0 = &uart12; 22 serial0 = &uart12;
23 serial1 = &uart13; 23 serial1 = &uart13;
24 }; 24 };
25 25
26 backlight: backlight { 26 backlight: backlight {
27 compatible = "pwm-backlight"; 27 compatible = "pwm-backlight";
28 pwms = <&pmc8180c_lpg 4 100000 28 pwms = <&pmc8180c_lpg 4 1000000>;
29 enable-gpios = <&pmc8180c_gpio 29 enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
30 30
31 pinctrl-names = "default"; 31 pinctrl-names = "default";
32 pinctrl-0 = <&bl_pwm_default>; 32 pinctrl-0 = <&bl_pwm_default>;
33 }; 33 };
34 34
35 chosen { 35 chosen {
36 stdout-path = "serial0:115200n 36 stdout-path = "serial0:115200n8";
37 }; 37 };
38 38
39 gpio-keys { 39 gpio-keys {
40 compatible = "gpio-keys"; 40 compatible = "gpio-keys";
41 41
42 pinctrl-names = "default"; 42 pinctrl-names = "default";
43 pinctrl-0 = <&hall_int_active_ 43 pinctrl-0 = <&hall_int_active_state>;
44 44
45 lid-switch { 45 lid-switch {
46 gpios = <&tlmm 121 GPI 46 gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
47 linux,input-type = <EV 47 linux,input-type = <EV_SW>;
48 linux,code = <SW_LID>; 48 linux,code = <SW_LID>;
49 wakeup-source; 49 wakeup-source;
50 wakeup-event-action = 50 wakeup-event-action = <EV_ACT_DEASSERTED>;
51 }; 51 };
52 }; 52 };
53 53
54 pmic-glink { 54 pmic-glink {
55 compatible = "qcom,sc8180x-pmi 55 compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink";
56 56
57 #address-cells = <1>; 57 #address-cells = <1>;
58 #size-cells = <0>; 58 #size-cells = <0>;
59 59
60 connector@0 { 60 connector@0 {
61 compatible = "usb-c-co 61 compatible = "usb-c-connector";
62 reg = <0>; 62 reg = <0>;
63 power-role = "dual"; 63 power-role = "dual";
64 data-role = "dual"; 64 data-role = "dual";
65 65
66 ports { 66 ports {
67 #address-cells 67 #address-cells = <1>;
68 #size-cells = 68 #size-cells = <0>;
69 69
70 port@0 { 70 port@0 {
71 reg = 71 reg = <0>;
72 72
73 pmic_g 73 pmic_glink_con0_hs: endpoint {
74 74 remote-endpoint = <&usb_prim_dwc3_hs>;
75 }; 75 };
76 }; 76 };
77 77
78 port@1 { 78 port@1 {
79 reg = 79 reg = <1>;
80 80
81 pmic_g 81 pmic_glink_con0_ss: endpoint {
82 82 remote-endpoint = <&usb_prim_qmpphy_out>;
83 }; 83 };
84 }; 84 };
85 85
86 port@2 { 86 port@2 {
87 reg = 87 reg = <2>;
88 88
89 pmic_g 89 pmic_glink_con0_sbu: endpoint {
90 90 remote-endpoint = <&usbprim_sbu_mux>;
91 }; 91 };
92 }; 92 };
93 }; 93 };
94 }; 94 };
95 95
96 connector@1 { 96 connector@1 {
97 compatible = "usb-c-co 97 compatible = "usb-c-connector";
98 reg = <1>; 98 reg = <1>;
99 power-role = "dual"; 99 power-role = "dual";
100 data-role = "dual"; 100 data-role = "dual";
101 101
102 ports { 102 ports {
103 #address-cells 103 #address-cells = <1>;
104 #size-cells = 104 #size-cells = <0>;
105 port@0 { 105 port@0 {
106 reg = 106 reg = <0>;
107 107
108 pmic_g 108 pmic_glink_con1_hs: endpoint {
109 109 remote-endpoint = <&usb_sec_dwc3_hs>;
110 }; 110 };
111 }; 111 };
112 112
113 port@1 { 113 port@1 {
114 reg = 114 reg = <1>;
115 115
116 pmic_g 116 pmic_glink_con1_ss: endpoint {
117 117 remote-endpoint = <&usb_sec_qmpphy_out>;
118 }; 118 };
119 }; 119 };
120 120
121 port@2 { 121 port@2 {
122 reg = 122 reg = <2>;
123 123
124 pmic_g 124 pmic_glink_con1_sbu: endpoint {
125 125 remote-endpoint = <&usbsec_sbu_mux>;
126 }; 126 };
127 }; 127 };
128 }; 128 };
129 }; 129 };
130 }; 130 };
131 131
132 reserved-memory { 132 reserved-memory {
133 rmtfs_mem: rmtfs-region@855000 133 rmtfs_mem: rmtfs-region@85500000 {
134 compatible = "qcom,rmt 134 compatible = "qcom,rmtfs-mem";
135 reg = <0x0 0x85500000 135 reg = <0x0 0x85500000 0x0 0x200000>;
136 no-map; 136 no-map;
137 137
138 qcom,client-id = <1>; 138 qcom,client-id = <1>;
139 qcom,vmid = <QCOM_SCM_ 139 qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
140 }; 140 };
141 141
142 wlan_mem: wlan-region@8bc00000 142 wlan_mem: wlan-region@8bc00000 {
143 reg = <0x0 0x8bc00000 143 reg = <0x0 0x8bc00000 0x0 0x180000>;
144 no-map; 144 no-map;
145 }; 145 };
146 146
147 adsp_mem: adsp-region@96e00000 147 adsp_mem: adsp-region@96e00000 {
148 reg = <0x0 0x96e00000 148 reg = <0x0 0x96e00000 0x0 0x1c00000>;
149 no-map; 149 no-map;
150 }; 150 };
151 151
152 mpss_mem: mpss-region@8d800000 152 mpss_mem: mpss-region@8d800000 {
153 reg = <0x0 0x8d800000 153 reg = <0x0 0x8d800000 0x0 0x9600000>;
154 no-map; 154 no-map;
155 }; 155 };
156 156
157 gpu_mem: gpu-region@98a00000 { 157 gpu_mem: gpu-region@98a00000 {
158 reg = <0x0 0x98a00000 158 reg = <0x0 0x98a00000 0x0 0x2000>;
159 no-map; 159 no-map;
160 }; 160 };
161 161
162 reserved-region@9a500000 { 162 reserved-region@9a500000 {
163 reg = <0x0 0x9a500000 163 reg = <0x0 0x9a500000 0x0 0x600000>;
164 no-map; 164 no-map;
165 }; 165 };
166 }; 166 };
167 167
168 vreg_nvme_0p9: nvme-0p9-regulator { 168 vreg_nvme_0p9: nvme-0p9-regulator {
169 compatible = "regulator-fixed" 169 compatible = "regulator-fixed";
170 regulator-name = "vreg_nvme_0p 170 regulator-name = "vreg_nvme_0p9";
171 171
172 regulator-min-microvolt = <900 172 regulator-min-microvolt = <900000>;
173 regulator-max-microvolt = <900 173 regulator-max-microvolt = <900000>;
174 174
175 regulator-always-on; 175 regulator-always-on;
176 }; 176 };
177 177
178 vreg_nvme_3p3: nvme-3p3-regulator { 178 vreg_nvme_3p3: nvme-3p3-regulator {
179 compatible = "regulator-fixed" 179 compatible = "regulator-fixed";
180 regulator-name = "vreg_nvme_3p 180 regulator-name = "vreg_nvme_3p3";
181 181
182 regulator-min-microvolt = <330 182 regulator-min-microvolt = <3300000>;
183 regulator-max-microvolt = <330 183 regulator-max-microvolt = <3300000>;
184 184
185 gpio = <&pmc8180c_gpios 11 0>; 185 gpio = <&pmc8180c_gpios 11 0>;
186 enable-active-high; 186 enable-active-high;
187 187
188 regulator-always-on; 188 regulator-always-on;
189 }; 189 };
190 190
191 vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator 191 vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator {
192 compatible = "regulator-fixed" 192 compatible = "regulator-fixed";
193 regulator-name = "vdd_kb_tp_3v 193 regulator-name = "vdd_kb_tp_3v3";
194 regulator-min-microvolt = <330 194 regulator-min-microvolt = <3300000>;
195 regulator-max-microvolt = <330 195 regulator-max-microvolt = <3300000>;
196 196
197 gpio = <&tlmm 4 GPIO_ACTIVE_HI 197 gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
198 enable-active-high; 198 enable-active-high;
199 199
200 regulator-always-on; 200 regulator-always-on;
201 201
202 pinctrl-names = "default"; 202 pinctrl-names = "default";
203 pinctrl-0 = <&kb_tp_3v3_en_act 203 pinctrl-0 = <&kb_tp_3v3_en_active_state>;
204 }; 204 };
205 205
206 vph_pwr: vph-pwr-regulator { 206 vph_pwr: vph-pwr-regulator {
207 compatible = "regulator-fixed" 207 compatible = "regulator-fixed";
208 regulator-name = "vph_pwr"; 208 regulator-name = "vph_pwr";
209 regulator-min-microvolt = <370 209 regulator-min-microvolt = <3700000>;
210 regulator-max-microvolt = <370 210 regulator-max-microvolt = <3700000>;
211 }; 211 };
212 212
213 vreg_s4a_1p8: pm8150-s4 { 213 vreg_s4a_1p8: pm8150-s4 {
214 compatible = "regulator-fixed" 214 compatible = "regulator-fixed";
215 regulator-name = "vreg_s4a_1p8 215 regulator-name = "vreg_s4a_1p8";
216 216
217 regulator-min-microvolt = <180 217 regulator-min-microvolt = <1800000>;
218 regulator-max-microvolt = <180 218 regulator-max-microvolt = <1800000>;
219 219
220 regulator-always-on; 220 regulator-always-on;
221 regulator-boot-on; 221 regulator-boot-on;
222 222
223 vin-supply = <&vph_pwr>; 223 vin-supply = <&vph_pwr>;
224 }; 224 };
225 225
226 vreg_usb2_host_en: regulator-usb2-host <<
227 compatible = "regulator-fixed" <<
228 regulator-name = "usb2_host_en <<
229 <<
230 regulator-min-microvolt = <500 <<
231 regulator-max-microvolt = <500 <<
232 <<
233 gpio = <&pmc8180_1_gpios 9 GPI <<
234 enable-active-high; <<
235 <<
236 regulator-always-on; <<
237 }; <<
238 <<
239 vreg_usb3_host_en: regulator-usb3-host <<
240 compatible = "regulator-fixed" <<
241 regulator-name = "usb3_host_en <<
242 <<
243 regulator-min-microvolt = <500 <<
244 regulator-max-microvolt = <500 <<
245 <<
246 gpio = <&pmc8180_2_gpios 9 GPI <<
247 enable-active-high; <<
248 <<
249 regulator-always-on; <<
250 }; <<
251 <<
252 usbprim-sbu-mux { 226 usbprim-sbu-mux {
253 compatible = "pericom,pi3usb10 227 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
254 228
255 enable-gpios = <&tlmm 152 GPIO 229 enable-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
256 select-gpios = <&tlmm 100 GPIO 230 select-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
257 231
258 pinctrl-names = "default"; 232 pinctrl-names = "default";
259 pinctrl-0 = <&usbprim_sbu_defa 233 pinctrl-0 = <&usbprim_sbu_default>;
260 234
261 mode-switch; 235 mode-switch;
262 orientation-switch; 236 orientation-switch;
263 237
264 port { 238 port {
265 usbprim_sbu_mux: endpo 239 usbprim_sbu_mux: endpoint {
266 remote-endpoin 240 remote-endpoint = <&pmic_glink_con0_sbu>;
267 }; 241 };
268 }; 242 };
269 }; 243 };
270 244
271 usbsec-sbu-mux { 245 usbsec-sbu-mux {
272 compatible = "pericom,pi3usb10 246 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
273 247
274 enable-gpios = <&tlmm 188 GPIO 248 enable-gpios = <&tlmm 188 GPIO_ACTIVE_LOW>;
275 select-gpios = <&tlmm 187 GPIO 249 select-gpios = <&tlmm 187 GPIO_ACTIVE_HIGH>;
276 250
277 pinctrl-names = "default"; 251 pinctrl-names = "default";
278 pinctrl-0 = <&usbsec_sbu_defau 252 pinctrl-0 = <&usbsec_sbu_default>;
279 253
280 mode-switch; 254 mode-switch;
281 orientation-switch; 255 orientation-switch;
282 256
283 port { 257 port {
284 usbsec_sbu_mux: endpoi 258 usbsec_sbu_mux: endpoint {
285 remote-endpoin 259 remote-endpoint = <&pmic_glink_con1_sbu>;
286 }; 260 };
287 }; 261 };
288 }; 262 };
289 }; 263 };
290 264
291 &apps_rsc { 265 &apps_rsc {
292 regulators-0 { 266 regulators-0 {
293 compatible = "qcom,pmc8180-rpm 267 compatible = "qcom,pmc8180-rpmh-regulators";
294 qcom,pmic-id = "a"; 268 qcom,pmic-id = "a";
295 269
296 vdd-s5-supply = <&vph_pwr>; 270 vdd-s5-supply = <&vph_pwr>;
297 vdd-l7-l12-l14-l15-supply = <& 271 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
298 272
299 vreg_s5a_2p0: smps5 { 273 vreg_s5a_2p0: smps5 {
300 regulator-min-microvol 274 regulator-min-microvolt = <2040000>;
301 regulator-max-microvol 275 regulator-max-microvolt = <2100000>;
302 }; 276 };
303 277
304 vreg_l7a_1p8: ldo7 { 278 vreg_l7a_1p8: ldo7 {
305 regulator-min-microvol 279 regulator-min-microvolt = <1800000>;
306 regulator-max-microvol 280 regulator-max-microvolt = <1800000>;
307 regulator-initial-mode 281 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 }; 282 };
309 283
310 vreg_l9a_1p3: ldo9 { 284 vreg_l9a_1p3: ldo9 {
311 regulator-min-microvol 285 regulator-min-microvolt = <1296000>;
312 regulator-max-microvol 286 regulator-max-microvolt = <1304000>;
313 regulator-initial-mode 287 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
314 }; 288 };
315 289
316 vreg_l12a_1p8: ldo12 { 290 vreg_l12a_1p8: ldo12 {
317 regulator-min-microvol 291 regulator-min-microvolt = <1800000>;
318 regulator-max-microvol 292 regulator-max-microvolt = <1800000>;
319 regulator-initial-mode 293 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
320 }; 294 };
321 }; 295 };
322 296
323 regulators-1 { 297 regulators-1 {
324 compatible = "qcom,pmc8180c-rp 298 compatible = "qcom,pmc8180c-rpmh-regulators";
325 qcom,pmic-id = "c"; 299 qcom,pmic-id = "c";
326 300
327 vdd-s6-supply = <&vph_pwr>; 301 vdd-s6-supply = <&vph_pwr>;
328 vdd-s8-supply = <&vph_pwr>; 302 vdd-s8-supply = <&vph_pwr>;
329 vdd-l2-l3-supply = <&vreg_s6c_ 303 vdd-l2-l3-supply = <&vreg_s6c_1p35>;
330 vdd-bob-supply = <&vph_pwr>; 304 vdd-bob-supply = <&vph_pwr>;
331 305
332 vreg_s6c_1p35: smps6 { 306 vreg_s6c_1p35: smps6 {
333 regulator-min-microvol 307 regulator-min-microvolt = <1350000>;
334 regulator-max-microvol 308 regulator-max-microvolt = <1372000>;
335 regulator-initial-mode 309 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 }; 310 };
337 311
338 vreg_s8c_1p8: smps8 { 312 vreg_s8c_1p8: smps8 {
339 regulator-min-microvol 313 regulator-min-microvolt = <1800000>;
340 regulator-max-microvol 314 regulator-max-microvolt = <1800000>;
341 regulator-initial-mode 315 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
342 regulator-always-on; 316 regulator-always-on;
343 }; 317 };
344 318
345 vreg_l3c_1p2: ldo3 { 319 vreg_l3c_1p2: ldo3 {
346 regulator-min-microvol 320 regulator-min-microvolt = <1200000>;
347 regulator-max-microvol 321 regulator-max-microvolt = <1200000>;
348 regulator-initial-mode 322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
349 }; 323 };
350 324
351 vreg_l4c_3p3: ldo4 { 325 vreg_l4c_3p3: ldo4 {
352 regulator-min-microvol 326 regulator-min-microvolt = <3008000>;
353 regulator-max-microvol 327 regulator-max-microvolt = <3008000>;
354 regulator-initial-mode 328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
355 }; 329 };
356 330
357 vreg_l10c_3p3: ldo10 { 331 vreg_l10c_3p3: ldo10 {
358 regulator-min-microvol 332 regulator-min-microvolt = <3000000>;
359 regulator-max-microvol 333 regulator-max-microvolt = <3312000>;
360 regulator-initial-mode 334 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
361 }; 335 };
362 336
363 vreg_l11c_3p3: ldo11 { 337 vreg_l11c_3p3: ldo11 {
364 regulator-min-microvol 338 regulator-min-microvolt = <3296000>;
365 regulator-max-microvol 339 regulator-max-microvolt = <3304000>;
366 regulator-initial-mode 340 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
367 }; 341 };
368 342
369 vreg_bob: bob { 343 vreg_bob: bob {
370 regulator-min-microvol 344 regulator-min-microvolt = <3296000>;
371 regulator-max-microvol 345 regulator-max-microvolt = <3350000>;
372 regulator-initial-mode 346 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
373 }; 347 };
374 }; 348 };
375 349
376 regulators-2 { 350 regulators-2 {
377 compatible = "qcom,pmc8180-rpm 351 compatible = "qcom,pmc8180-rpmh-regulators";
378 qcom,pmic-id = "e"; 352 qcom,pmic-id = "e";
379 353
380 vdd-s4-supply = <&vph_pwr>; 354 vdd-s4-supply = <&vph_pwr>;
381 vdd-s5-supply = <&vph_pwr>; 355 vdd-s5-supply = <&vph_pwr>;
382 vdd-l2-l10-supply = <&vreg_bob 356 vdd-l2-l10-supply = <&vreg_bob>;
383 vdd-l3-l4-l5-l18-supply = <&vr 357 vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
384 vdd-l7-l12-l14-l15-supply = <& 358 vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
385 vdd-l13-l16-l17-supply = <&vre 359 vdd-l13-l16-l17-supply = <&vreg_bob>;
386 360
387 vreg_s4e_0p98: smps4 { 361 vreg_s4e_0p98: smps4 {
388 regulator-min-microvol 362 regulator-min-microvolt = <992000>;
389 regulator-max-microvol 363 regulator-max-microvolt = <992000>;
390 regulator-initial-mode 364 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
391 }; 365 };
392 366
393 vreg_s5e_2p05: smps5 { 367 vreg_s5e_2p05: smps5 {
394 regulator-min-microvol 368 regulator-min-microvolt = <2040000>;
395 regulator-max-microvol 369 regulator-max-microvolt = <2040000>;
396 regulator-initial-mode 370 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
397 }; 371 };
398 372
399 vreg_l1e_0p75: ldo1 { 373 vreg_l1e_0p75: ldo1 {
400 regulator-min-microvol 374 regulator-min-microvolt = <752000>;
401 regulator-max-microvol 375 regulator-max-microvolt = <752000>;
402 regulator-initial-mode 376 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
403 }; 377 };
404 378
405 vreg_l5e_0p88: ldo5 { 379 vreg_l5e_0p88: ldo5 {
406 regulator-min-microvol 380 regulator-min-microvolt = <880000>;
407 regulator-max-microvol 381 regulator-max-microvolt = <880000>;
408 regulator-initial-mode 382 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
409 }; 383 };
410 384
411 vreg_l7e_1p8: ldo7 { 385 vreg_l7e_1p8: ldo7 {
412 regulator-min-microvol 386 regulator-min-microvolt = <1800000>;
413 regulator-max-microvol 387 regulator-max-microvolt = <1800000>;
414 regulator-initial-mode 388 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
415 regulator-allowed-mode 389 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
416 390 RPMH_REGULATOR_MODE_HPM>;
417 regulator-allow-set-lo 391 regulator-allow-set-load;
418 }; 392 };
419 393
420 vreg_l10e_2p9: ldo10 { 394 vreg_l10e_2p9: ldo10 {
421 regulator-min-microvol 395 regulator-min-microvolt = <2904000>;
422 regulator-max-microvol 396 regulator-max-microvolt = <2904000>;
423 regulator-initial-mode 397 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
424 regulator-allowed-mode 398 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
425 399 RPMH_REGULATOR_MODE_HPM>;
426 regulator-allow-set-lo 400 regulator-allow-set-load;
427 }; 401 };
428 402
429 vreg_l12e: ldo12 { 403 vreg_l12e: ldo12 {
430 regulator-min-microvol 404 regulator-min-microvolt = <1800000>;
431 regulator-max-microvol 405 regulator-max-microvolt = <1800000>;
432 regulator-initial-mode 406 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
433 }; 407 };
434 408
435 vreg_l16e_3p0: ldo16 { 409 vreg_l16e_3p0: ldo16 {
436 regulator-min-microvol 410 regulator-min-microvolt = <3072000>;
437 regulator-max-microvol 411 regulator-max-microvolt = <3072000>;
438 regulator-initial-mode 412 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
439 }; 413 };
440 }; 414 };
441 }; 415 };
442 416
443 &gpu { 417 &gpu {
444 status = "okay"; 418 status = "okay";
445 419
446 zap-shader { 420 zap-shader {
447 memory-region = <&gpu_mem>; 421 memory-region = <&gpu_mem>;
448 firmware-name = "qcom/sc8180x/ 422 firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
449 }; 423 };
450 }; 424 };
451 425
452 &i2c1 { 426 &i2c1 {
453 clock-frequency = <100000>; 427 clock-frequency = <100000>;
454 428
455 pinctrl-names = "default"; 429 pinctrl-names = "default";
456 pinctrl-0 = <&ts_i2c_active_state>; 430 pinctrl-0 = <&ts_i2c_active_state>;
457 431
458 status = "okay"; 432 status = "okay";
459 433
460 touchscreen@10 { 434 touchscreen@10 {
461 compatible = "hid-over-i2c"; 435 compatible = "hid-over-i2c";
462 reg = <0x10>; 436 reg = <0x10>;
463 hid-descr-addr = <0x1>; 437 hid-descr-addr = <0x1>;
464 438
465 vdd-supply = <&vreg_l4c_3p3>; 439 vdd-supply = <&vreg_l4c_3p3>;
466 vddl-supply = <&vreg_l12e>; 440 vddl-supply = <&vreg_l12e>;
467 441
468 post-power-on-delay-ms = <20>; 442 post-power-on-delay-ms = <20>;
469 443
470 interrupts-extended = <&tlmm 1 444 interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
471 445
472 pinctrl-names = "default"; 446 pinctrl-names = "default";
473 pinctrl-0 = <&ts_active_state> 447 pinctrl-0 = <&ts_active_state>;
474 }; 448 };
475 }; 449 };
476 450
477 &i2c7 { 451 &i2c7 {
478 clock-frequency = <100000>; 452 clock-frequency = <100000>;
479 453
480 pinctrl-names = "default"; 454 pinctrl-names = "default";
481 pinctrl-0 = <&aux_i2c_active_state>; 455 pinctrl-0 = <&aux_i2c_active_state>;
482 456
483 status = "okay"; 457 status = "okay";
484 458
485 touchpad@15 { 459 touchpad@15 {
486 compatible = "hid-over-i2c"; 460 compatible = "hid-over-i2c";
487 reg = <0x15>; 461 reg = <0x15>;
488 hid-descr-addr = <0x1>; 462 hid-descr-addr = <0x1>;
489 463
490 interrupts-extended = <&tlmm 2 464 interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
491 465
492 pinctrl-names = "default"; 466 pinctrl-names = "default";
493 pinctrl-0 = <&tp_int_active_st 467 pinctrl-0 = <&tp_int_active_state>;
494 468
495 vdd-supply = <&vdd_kb_tp_3v3>; 469 vdd-supply = <&vdd_kb_tp_3v3>;
496 }; 470 };
497 471
498 keyboard@3a { 472 keyboard@3a {
499 compatible = "hid-over-i2c"; 473 compatible = "hid-over-i2c";
500 reg = <0x3a>; 474 reg = <0x3a>;
501 hid-descr-addr = <0x1>; 475 hid-descr-addr = <0x1>;
502 interrupts-extended = <&tlmm 3 476 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
503 477
504 pinctrl-names = "default"; 478 pinctrl-names = "default";
505 pinctrl-0 = <&kb_int_active_st 479 pinctrl-0 = <&kb_int_active_state>;
506 480
507 vdd-supply = <&vdd_kb_tp_3v3>; 481 vdd-supply = <&vdd_kb_tp_3v3>;
508 }; 482 };
509 }; 483 };
510 484
511 &mdss { 485 &mdss {
512 status = "okay"; 486 status = "okay";
513 }; 487 };
514 488
515 &mdss_dp0 { 489 &mdss_dp0 {
516 status = "okay"; 490 status = "okay";
517 }; 491 };
518 492
519 &mdss_dp0_out { 493 &mdss_dp0_out {
520 data-lanes = <0 1>; 494 data-lanes = <0 1>;
521 remote-endpoint = <&usb_prim_qmpphy_dp 495 remote-endpoint = <&usb_prim_qmpphy_dp_in>;
522 }; 496 };
523 497
524 &mdss_dp1 { 498 &mdss_dp1 {
525 status = "okay"; 499 status = "okay";
526 }; 500 };
527 501
528 &mdss_dp1_out { 502 &mdss_dp1_out {
529 data-lanes = <0 1>; 503 data-lanes = <0 1>;
530 remote-endpoint = <&usb_sec_qmpphy_dp_ 504 remote-endpoint = <&usb_sec_qmpphy_dp_in>;
531 }; 505 };
532 506
533 &mdss_edp { 507 &mdss_edp {
534 data-lanes = <0 1 2 3>; 508 data-lanes = <0 1 2 3>;
535 509
536 pinctrl-names = "default"; 510 pinctrl-names = "default";
537 pinctrl-0 = <&edp_hpd_active>; 511 pinctrl-0 = <&edp_hpd_active>;
538 512
539 status = "okay"; 513 status = "okay";
540 514
541 aux-bus { 515 aux-bus {
542 panel { 516 panel {
543 compatible = "edp-pane 517 compatible = "edp-panel";
544 518
545 backlight = <&backligh 519 backlight = <&backlight>;
546 520
547 port { 521 port {
548 auo_b133han05_ 522 auo_b133han05_in: endpoint {
549 remote 523 remote-endpoint = <&mdss_edp_out>;
550 }; 524 };
551 }; 525 };
552 }; 526 };
553 }; 527 };
554 528
555 ports { 529 ports {
556 port@1 { 530 port@1 {
557 reg = <1>; 531 reg = <1>;
558 mdss_edp_out: endpoint 532 mdss_edp_out: endpoint {
559 remote-endpoin 533 remote-endpoint = <&auo_b133han05_in>;
560 }; 534 };
561 }; 535 };
562 }; 536 };
563 }; 537 };
564 538
565 &pcie1 { 539 &pcie1 {
566 perst-gpios = <&tlmm 175 GPIO_ACTIVE_L 540 perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
567 wake-gpios = <&tlmm 177 GPIO_ACTIVE_HI 541 wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>;
568 pinctrl-names = "default"; 542 pinctrl-names = "default";
569 pinctrl-0 = <&pcie2_default_state>; 543 pinctrl-0 = <&pcie2_default_state>;
570 544
571 status = "okay"; 545 status = "okay";
572 }; 546 };
573 547
574 &pcie1_phy { 548 &pcie1_phy {
575 vdda-phy-supply = <&vreg_l5e_0p88>; 549 vdda-phy-supply = <&vreg_l5e_0p88>;
576 vdda-pll-supply = <&vreg_l3c_1p2>; 550 vdda-pll-supply = <&vreg_l3c_1p2>;
577 551
578 status = "okay"; 552 status = "okay";
579 }; 553 };
580 554
581 &pmc8180_pwrkey { <<
582 status = "okay"; <<
583 }; <<
584 <<
585 &pmc8180c_lpg { 555 &pmc8180c_lpg {
586 status = "okay"; 556 status = "okay";
587 }; 557 };
588 558
589 &qupv3_id_0 { 559 &qupv3_id_0 {
590 status = "okay"; 560 status = "okay";
591 }; 561 };
592 562
593 &qupv3_id_1 { 563 &qupv3_id_1 {
594 status = "okay"; 564 status = "okay";
595 }; 565 };
596 566
597 &qupv3_id_2 { 567 &qupv3_id_2 {
598 status = "okay"; 568 status = "okay";
599 }; 569 };
600 570
601 &remoteproc_adsp { 571 &remoteproc_adsp {
602 memory-region = <&adsp_mem>; 572 memory-region = <&adsp_mem>;
603 firmware-name = "qcom/sc8180x/qcadsp81 573 firmware-name = "qcom/sc8180x/qcadsp8180.mbn";
604 574
605 status = "okay"; 575 status = "okay";
606 }; 576 };
607 577
608 &remoteproc_mpss { 578 &remoteproc_mpss {
609 memory-region = <&mpss_mem>; 579 memory-region = <&mpss_mem>;
610 firmware-name = "qcom/sc8180x/qcmpss81 580 firmware-name = "qcom/sc8180x/qcmpss8180.mbn";
611 581
612 status = "okay"; 582 status = "okay";
613 }; 583 };
614 584
615 &uart12 { 585 &uart12 {
616 compatible = "qcom,geni-debug-uart"; 586 compatible = "qcom,geni-debug-uart";
617 status = "okay"; 587 status = "okay";
618 }; 588 };
619 589
620 &uart13 { 590 &uart13 {
621 pinctrl-names = "default"; 591 pinctrl-names = "default";
622 pinctrl-0 = <&uart13_state>; 592 pinctrl-0 = <&uart13_state>;
623 593
624 status = "okay"; 594 status = "okay";
625 595
626 bluetooth { 596 bluetooth {
627 compatible = "qcom,wcn3998-bt" 597 compatible = "qcom,wcn3998-bt";
628 598
629 vddio-supply = <&vreg_s4a_1p8> 599 vddio-supply = <&vreg_s4a_1p8>;
630 vddxo-supply = <&vreg_l7a_1p8> 600 vddxo-supply = <&vreg_l7a_1p8>;
631 vddrf-supply = <&vreg_l9a_1p3> 601 vddrf-supply = <&vreg_l9a_1p3>;
632 vddch0-supply = <&vreg_l11c_3p 602 vddch0-supply = <&vreg_l11c_3p3>;
633 max-speed = <3200000>; 603 max-speed = <3200000>;
634 }; 604 };
635 }; 605 };
636 606
637 &ufs_mem_hc { 607 &ufs_mem_hc {
638 reset-gpios = <&tlmm 190 GPIO_ACTIVE_L 608 reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
639 609
640 vcc-supply = <&vreg_l10e_2p9>; 610 vcc-supply = <&vreg_l10e_2p9>;
641 vcc-max-microamp = <155000>; 611 vcc-max-microamp = <155000>;
642 612
643 vccq2-supply = <&vreg_l7e_1p8>; 613 vccq2-supply = <&vreg_l7e_1p8>;
644 vccq2-max-microamp = <425000>; 614 vccq2-max-microamp = <425000>;
645 615
646 status = "okay"; 616 status = "okay";
647 }; 617 };
648 618
649 &ufs_mem_phy { 619 &ufs_mem_phy {
650 vdda-phy-supply = <&vreg_l5e_0p88>; 620 vdda-phy-supply = <&vreg_l5e_0p88>;
651 vdda-pll-supply = <&vreg_l3c_1p2>; 621 vdda-pll-supply = <&vreg_l3c_1p2>;
652 <<
653 status = "okay"; <<
654 }; <<
655 <<
656 &usb_mp { <<
657 status = "okay"; <<
658 }; <<
659 <<
660 &usb_mp_hsphy0 { <<
661 vdda-pll-supply = <&vreg_l5e_0p88>; <<
662 vdda18-supply = <&vreg_l12a_1p8>; <<
663 vdda33-supply = <&vreg_l16e_3p0>; <<
664 <<
665 status = "okay"; <<
666 }; <<
667 <<
668 &usb_mp_hsphy1 { <<
669 vdda-pll-supply = <&vreg_l5e_0p88>; <<
670 vdda18-supply = <&vreg_l12a_1p8>; <<
671 vdda33-supply = <&vreg_l16e_3p0>; <<
672 <<
673 status = "okay"; <<
674 }; <<
675 <<
676 &usb_mp_qmpphy0 { <<
677 vdda-phy-supply = <&vreg_l3c_1p2>; <<
678 vdda-pll-supply = <&vreg_l5e_0p88>; <<
679 <<
680 status = "okay"; <<
681 }; <<
682 <<
683 &usb_mp_qmpphy1 { <<
684 vdda-phy-supply = <&vreg_l3c_1p2>; <<
685 vdda-pll-supply = <&vreg_l5e_0p88>; <<
686 622
687 status = "okay"; 623 status = "okay";
688 }; 624 };
689 625
690 &usb_prim_hsphy { 626 &usb_prim_hsphy {
691 vdda-pll-supply = <&vreg_l5e_0p88>; 627 vdda-pll-supply = <&vreg_l5e_0p88>;
692 vdda18-supply = <&vreg_l12a_1p8>; 628 vdda18-supply = <&vreg_l12a_1p8>;
693 vdda33-supply = <&vreg_l16e_3p0>; 629 vdda33-supply = <&vreg_l16e_3p0>;
694 630
695 status = "okay"; 631 status = "okay";
696 }; 632 };
697 633
698 &usb_prim_qmpphy { 634 &usb_prim_qmpphy {
699 vdda-phy-supply = <&vreg_l3c_1p2>; 635 vdda-phy-supply = <&vreg_l3c_1p2>;
700 vdda-pll-supply = <&vreg_l5e_0p88>; 636 vdda-pll-supply = <&vreg_l5e_0p88>;
701 637
702 orientation-switch; 638 orientation-switch;
703 639
704 status = "okay"; 640 status = "okay";
705 }; 641 };
706 642
707 &usb_prim { 643 &usb_prim {
708 status = "okay"; 644 status = "okay";
709 }; 645 };
710 646
711 &usb_prim_dwc3 { 647 &usb_prim_dwc3 {
712 dr_mode = "host"; 648 dr_mode = "host";
713 }; 649 };
714 650
715 &usb_prim_dwc3_hs { 651 &usb_prim_dwc3_hs {
716 remote-endpoint = <&pmic_glink_con0_hs 652 remote-endpoint = <&pmic_glink_con0_hs>;
717 }; 653 };
718 654
719 &usb_prim_qmpphy_dp_in { 655 &usb_prim_qmpphy_dp_in {
720 remote-endpoint = <&mdss_dp0_out>; 656 remote-endpoint = <&mdss_dp0_out>;
721 }; 657 };
722 658
723 &usb_prim_qmpphy_out { 659 &usb_prim_qmpphy_out {
724 remote-endpoint = <&pmic_glink_con0_ss 660 remote-endpoint = <&pmic_glink_con0_ss>;
725 }; 661 };
726 662
727 &usb_sec_hsphy { 663 &usb_sec_hsphy {
728 vdda-pll-supply = <&vreg_l5e_0p88>; 664 vdda-pll-supply = <&vreg_l5e_0p88>;
729 vdda18-supply = <&vreg_l12a_1p8>; 665 vdda18-supply = <&vreg_l12a_1p8>;
730 vdda33-supply = <&vreg_l16e_3p0>; 666 vdda33-supply = <&vreg_l16e_3p0>;
731 667
732 status = "okay"; 668 status = "okay";
733 }; 669 };
734 670
735 &usb_sec_qmpphy { 671 &usb_sec_qmpphy {
736 vdda-phy-supply = <&vreg_l3c_1p2>; 672 vdda-phy-supply = <&vreg_l3c_1p2>;
737 vdda-pll-supply = <&vreg_l5e_0p88>; 673 vdda-pll-supply = <&vreg_l5e_0p88>;
738 674
739 orientation-switch; 675 orientation-switch;
740 676
741 status = "okay"; 677 status = "okay";
742 }; 678 };
743 679
744 &usb_sec_qmpphy_dp_in { 680 &usb_sec_qmpphy_dp_in {
745 remote-endpoint = <&mdss_dp1_out>; 681 remote-endpoint = <&mdss_dp1_out>;
746 }; 682 };
747 683
748 &usb_sec_qmpphy_out { 684 &usb_sec_qmpphy_out {
749 remote-endpoint = <&pmic_glink_con1_ss 685 remote-endpoint = <&pmic_glink_con1_ss>;
750 }; 686 };
751 687
752 &usb_sec { 688 &usb_sec {
753 status = "okay"; 689 status = "okay";
754 }; 690 };
755 691
756 &usb_sec_dwc3 { 692 &usb_sec_dwc3 {
757 dr_mode = "host"; 693 dr_mode = "host";
758 }; 694 };
759 695
760 &usb_sec_dwc3_hs { 696 &usb_sec_dwc3_hs {
761 remote-endpoint = <&pmic_glink_con1_hs 697 remote-endpoint = <&pmic_glink_con1_hs>;
762 }; 698 };
763 699
764 &wifi { 700 &wifi {
765 memory-region = <&wlan_mem>; 701 memory-region = <&wlan_mem>;
766 702
767 vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75 703 vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
768 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 704 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
769 vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; 705 vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
770 vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; 706 vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
771 vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; 707 vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
772 708
773 status = "okay"; 709 status = "okay";
774 }; 710 };
775 711
776 &xo_board_clk { 712 &xo_board_clk {
777 clock-frequency = <38400000>; 713 clock-frequency = <38400000>;
778 }; 714 };
779 715
780 /* PINCTRL */ 716 /* PINCTRL */
781 717
782 &pmc8180c_gpios { 718 &pmc8180c_gpios {
783 bl_pwm_default: bl-pwm-default-state { 719 bl_pwm_default: bl-pwm-default-state {
784 en-pins { 720 en-pins {
785 pins = "gpio8"; 721 pins = "gpio8";
786 function = "normal"; 722 function = "normal";
787 }; 723 };
788 724
789 pwm-pins { 725 pwm-pins {
790 pins = "gpio10"; 726 pins = "gpio10";
791 function = "func1"; 727 function = "func1";
792 }; 728 };
793 }; 729 };
794 }; 730 };
795 731
796 &tlmm { 732 &tlmm {
797 gpio-reserved-ranges = <0 4>, <47 4>, 733 gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
798 734
799 aux_i2c_active_state: aux-i2c-active-s 735 aux_i2c_active_state: aux-i2c-active-state {
800 pins = "gpio98", "gpio99"; 736 pins = "gpio98", "gpio99";
801 function = "qup7"; 737 function = "qup7";
802 738
803 bias-disable; 739 bias-disable;
804 drive-strength = <16>; 740 drive-strength = <16>;
805 }; 741 };
806 742
807 edp_hpd_active: epd-hpd-active-state { 743 edp_hpd_active: epd-hpd-active-state {
808 pins = "gpio10"; 744 pins = "gpio10";
809 function = "edp_hot"; 745 function = "edp_hot";
810 }; 746 };
811 747
812 hall_int_active_state: hall-int-active 748 hall_int_active_state: hall-int-active-state {
813 pins = "gpio121"; 749 pins = "gpio121";
814 function = "gpio"; 750 function = "gpio";
815 751
816 bias-disable; 752 bias-disable;
817 }; 753 };
818 754
819 kb_int_active_state: kb-int-active-sta 755 kb_int_active_state: kb-int-active-state {
820 int-n-pins { 756 int-n-pins {
821 pins = "gpio37"; 757 pins = "gpio37";
822 function = "gpio"; 758 function = "gpio";
823 759
824 bias-pull-up; 760 bias-pull-up;
825 }; 761 };
826 762
827 kp-disable-pins { 763 kp-disable-pins {
828 pins = "gpio135"; 764 pins = "gpio135";
829 function = "gpio"; 765 function = "gpio";
830 766
831 output-high; 767 output-high;
832 }; 768 };
833 }; 769 };
834 770
835 kb_tp_3v3_en_active_state: kb-tp-3v3-e 771 kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state {
836 pins = "gpio4"; 772 pins = "gpio4";
837 function = "gpio"; 773 function = "gpio";
838 774
839 bias-disable; 775 bias-disable;
840 }; 776 };
841 777
842 pcie2_default_state: pcie2-default-sta 778 pcie2_default_state: pcie2-default-state {
843 clkreq-pins { 779 clkreq-pins {
844 pins = "gpio176"; 780 pins = "gpio176";
845 function = "pci_e2"; 781 function = "pci_e2";
846 bias-pull-up; 782 bias-pull-up;
847 }; 783 };
848 784
849 reset-n-pins { 785 reset-n-pins {
850 pins = "gpio175"; 786 pins = "gpio175";
851 function = "gpio"; 787 function = "gpio";
852 788
853 drive-strength = <2>; 789 drive-strength = <2>;
854 output-low; 790 output-low;
855 bias-pull-down; 791 bias-pull-down;
856 }; 792 };
857 793
858 wake-n-pins { 794 wake-n-pins {
859 pins = "gpio177"; 795 pins = "gpio177";
860 function = "gpio"; 796 function = "gpio";
861 797
862 drive-strength = <2>; 798 drive-strength = <2>;
863 bias-pull-up; 799 bias-pull-up;
864 }; 800 };
865 }; 801 };
866 802
867 usbprim_sbu_default: usbprim-sbu-state 803 usbprim_sbu_default: usbprim-sbu-state {
868 oe-n-pins { 804 oe-n-pins {
869 pins = "gpio152"; 805 pins = "gpio152";
870 function = "gpio"; 806 function = "gpio";
871 bias-disable; 807 bias-disable;
872 drive-strength = <16>; 808 drive-strength = <16>;
873 output-high; 809 output-high;
874 }; 810 };
875 811
876 sel-pins { 812 sel-pins {
877 pins = "gpio100"; 813 pins = "gpio100";
878 function = "gpio"; 814 function = "gpio";
879 bias-disable; 815 bias-disable;
880 drive-strength = <16>; 816 drive-strength = <16>;
881 }; 817 };
882 }; 818 };
883 819
884 usbsec_sbu_default: usbsec-sbu-state { 820 usbsec_sbu_default: usbsec-sbu-state {
885 oe-n-pins { 821 oe-n-pins {
886 pins = "gpio188"; 822 pins = "gpio188";
887 function = "gpio"; 823 function = "gpio";
888 bias-disable; 824 bias-disable;
889 drive-strength = <16>; 825 drive-strength = <16>;
890 output-high; 826 output-high;
891 }; 827 };
892 828
893 sel-pins { 829 sel-pins {
894 pins = "gpio187"; 830 pins = "gpio187";
895 function = "gpio"; 831 function = "gpio";
896 bias-disable; 832 bias-disable;
897 drive-strength = <16>; 833 drive-strength = <16>;
898 }; 834 };
899 }; 835 };
900 836
901 tp_int_active_state: tp-int-active-sta 837 tp_int_active_state: tp-int-active-state {
902 tp-int-pins { 838 tp-int-pins {
903 pins = "gpio24"; 839 pins = "gpio24";
904 function = "gpio"; 840 function = "gpio";
905 841
906 bias-disable; 842 bias-disable;
907 }; 843 };
908 844
909 tp-close-n-pins { 845 tp-close-n-pins {
910 pins = "gpio116"; 846 pins = "gpio116";
911 function = "gpio"; 847 function = "gpio";
912 848
913 bias-disable; 849 bias-disable;
914 }; 850 };
915 }; 851 };
916 852
917 ts_active_state: ts-active-state { 853 ts_active_state: ts-active-state {
918 int-n-pins { 854 int-n-pins {
919 pins = "gpio122"; 855 pins = "gpio122";
920 function = "gpio"; 856 function = "gpio";
921 857
922 bias-disable; 858 bias-disable;
923 }; 859 };
924 860
925 reset-n-pins { 861 reset-n-pins {
926 pins = "gpio54"; 862 pins = "gpio54";
927 function = "gpio"; 863 function = "gpio";
928 864
929 output-high; 865 output-high;
930 }; 866 };
931 }; 867 };
932 868
933 ts_i2c_active_state: ts-i2c-active-sta 869 ts_i2c_active_state: ts-i2c-active-state {
934 pins = "gpio114", "gpio115"; 870 pins = "gpio114", "gpio115";
935 function = "qup1"; 871 function = "qup1";
936 872
937 /* External pull up */ 873 /* External pull up */
938 bias-disable; 874 bias-disable;
939 drive-strength = <2>; 875 drive-strength = <2>;
940 }; 876 };
941 877
942 uart13_state: uart13-state { 878 uart13_state: uart13-state {
943 cts-pins { 879 cts-pins {
944 pins = "gpio43"; 880 pins = "gpio43";
945 function = "qup13"; 881 function = "qup13";
946 bias-pull-down; 882 bias-pull-down;
947 }; 883 };
948 884
949 rts-tx-pins { 885 rts-tx-pins {
950 pins = "gpio44", "gpio 886 pins = "gpio44", "gpio45";
951 function = "qup13"; 887 function = "qup13";
952 drive-strength = <2>; 888 drive-strength = <2>;
953 bias-disable; 889 bias-disable;
954 }; 890 };
955 891
956 rx-pins { 892 rx-pins {
957 pins = "gpio46"; 893 pins = "gpio46";
958 function = "qup13"; 894 function = "qup13";
959 bias-pull-up; 895 bias-pull-up;
960 }; 896 };
961 }; 897 };
962 }; 898 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.