1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2017-2019, The Linux Foundati 3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2020-2023, Linaro Limited 4 * Copyright (c) 2020-2023, Linaro Limited
5 */ 5 */
6 6
7 /dts-v1/; 7 /dts-v1/;
8 8
9 #include <dt-bindings/firmware/qcom,scm.h> 9 #include <dt-bindings/firmware/qcom,scm.h>
10 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/gpio-keys.h> 11 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/input/input.h> 12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/regulator/qcom,rpmh-regu 13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
14 #include "sc8180x.dtsi" 14 #include "sc8180x.dtsi"
15 #include "sc8180x-pmics.dtsi" 15 #include "sc8180x-pmics.dtsi"
16 16
17 / { 17 / {
18 model = "Qualcomm SC8180x Primus"; 18 model = "Qualcomm SC8180x Primus";
19 compatible = "qcom,sc8180x-primus", "q 19 compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
20 20
21 aliases { 21 aliases {
22 serial0 = &uart12; 22 serial0 = &uart12;
23 serial1 = &uart13; 23 serial1 = &uart13;
24 }; 24 };
25 25
26 backlight: backlight { 26 backlight: backlight {
27 compatible = "pwm-backlight"; 27 compatible = "pwm-backlight";
28 pwms = <&pmc8180c_lpg 4 100000 28 pwms = <&pmc8180c_lpg 4 1000000>;
29 enable-gpios = <&pmc8180c_gpio 29 enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
30 30
31 pinctrl-names = "default"; 31 pinctrl-names = "default";
32 pinctrl-0 = <&bl_pwm_default>; 32 pinctrl-0 = <&bl_pwm_default>;
33 }; 33 };
34 34
35 chosen { 35 chosen {
36 stdout-path = "serial0:115200n 36 stdout-path = "serial0:115200n8";
37 }; 37 };
38 38
39 gpio-keys { 39 gpio-keys {
40 compatible = "gpio-keys"; 40 compatible = "gpio-keys";
41 41
42 pinctrl-names = "default"; 42 pinctrl-names = "default";
43 pinctrl-0 = <&hall_int_active_ 43 pinctrl-0 = <&hall_int_active_state>;
44 44
45 lid-switch { 45 lid-switch {
46 gpios = <&tlmm 121 GPI 46 gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
47 linux,input-type = <EV 47 linux,input-type = <EV_SW>;
48 linux,code = <SW_LID>; 48 linux,code = <SW_LID>;
49 wakeup-source; 49 wakeup-source;
50 wakeup-event-action = 50 wakeup-event-action = <EV_ACT_DEASSERTED>;
51 }; 51 };
52 }; 52 };
53 53
54 pmic-glink { 54 pmic-glink {
55 compatible = "qcom,sc8180x-pmi 55 compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink";
56 56
57 #address-cells = <1>; 57 #address-cells = <1>;
58 #size-cells = <0>; 58 #size-cells = <0>;
59 59
60 connector@0 { 60 connector@0 {
61 compatible = "usb-c-co 61 compatible = "usb-c-connector";
62 reg = <0>; 62 reg = <0>;
63 power-role = "dual"; 63 power-role = "dual";
64 data-role = "dual"; 64 data-role = "dual";
65 65
66 ports { 66 ports {
67 #address-cells 67 #address-cells = <1>;
68 #size-cells = 68 #size-cells = <0>;
69 69
70 port@0 { 70 port@0 {
71 reg = 71 reg = <0>;
72 72
73 pmic_g 73 pmic_glink_con0_hs: endpoint {
74 74 remote-endpoint = <&usb_prim_dwc3_hs>;
75 }; 75 };
76 }; 76 };
77 77
78 port@1 { 78 port@1 {
79 reg = 79 reg = <1>;
80 80
81 pmic_g 81 pmic_glink_con0_ss: endpoint {
82 82 remote-endpoint = <&usb_prim_qmpphy_out>;
83 }; 83 };
84 }; 84 };
85 85
86 port@2 { 86 port@2 {
87 reg = 87 reg = <2>;
88 88
89 pmic_g 89 pmic_glink_con0_sbu: endpoint {
90 90 remote-endpoint = <&usbprim_sbu_mux>;
91 }; 91 };
92 }; 92 };
93 }; 93 };
94 }; 94 };
95 95
96 connector@1 { 96 connector@1 {
97 compatible = "usb-c-co 97 compatible = "usb-c-connector";
98 reg = <1>; 98 reg = <1>;
99 power-role = "dual"; 99 power-role = "dual";
100 data-role = "dual"; 100 data-role = "dual";
101 101
102 ports { 102 ports {
103 #address-cells 103 #address-cells = <1>;
104 #size-cells = 104 #size-cells = <0>;
105 port@0 { 105 port@0 {
106 reg = 106 reg = <0>;
107 107
108 pmic_g 108 pmic_glink_con1_hs: endpoint {
109 109 remote-endpoint = <&usb_sec_dwc3_hs>;
110 }; 110 };
111 }; 111 };
112 112
113 port@1 { 113 port@1 {
114 reg = 114 reg = <1>;
115 115
116 pmic_g 116 pmic_glink_con1_ss: endpoint {
117 117 remote-endpoint = <&usb_sec_qmpphy_out>;
118 }; 118 };
119 }; 119 };
120 120
121 port@2 { 121 port@2 {
122 reg = 122 reg = <2>;
123 123
124 pmic_g 124 pmic_glink_con1_sbu: endpoint {
125 125 remote-endpoint = <&usbsec_sbu_mux>;
126 }; 126 };
127 }; 127 };
128 }; 128 };
129 }; 129 };
130 }; 130 };
131 131
132 reserved-memory { 132 reserved-memory {
133 rmtfs_mem: rmtfs-region@855000 133 rmtfs_mem: rmtfs-region@85500000 {
134 compatible = "qcom,rmt 134 compatible = "qcom,rmtfs-mem";
135 reg = <0x0 0x85500000 135 reg = <0x0 0x85500000 0x0 0x200000>;
136 no-map; 136 no-map;
137 137
138 qcom,client-id = <1>; 138 qcom,client-id = <1>;
139 qcom,vmid = <QCOM_SCM_ 139 qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
140 }; 140 };
141 141
142 wlan_mem: wlan-region@8bc00000 142 wlan_mem: wlan-region@8bc00000 {
143 reg = <0x0 0x8bc00000 143 reg = <0x0 0x8bc00000 0x0 0x180000>;
144 no-map; 144 no-map;
145 }; 145 };
146 146
147 adsp_mem: adsp-region@96e00000 147 adsp_mem: adsp-region@96e00000 {
148 reg = <0x0 0x96e00000 148 reg = <0x0 0x96e00000 0x0 0x1c00000>;
149 no-map; 149 no-map;
150 }; 150 };
151 151
152 mpss_mem: mpss-region@8d800000 152 mpss_mem: mpss-region@8d800000 {
153 reg = <0x0 0x8d800000 153 reg = <0x0 0x8d800000 0x0 0x9600000>;
154 no-map; 154 no-map;
155 }; 155 };
156 156
157 gpu_mem: gpu-region@98a00000 { 157 gpu_mem: gpu-region@98a00000 {
158 reg = <0x0 0x98a00000 158 reg = <0x0 0x98a00000 0x0 0x2000>;
159 no-map; 159 no-map;
160 }; 160 };
161 161
162 reserved-region@9a500000 { 162 reserved-region@9a500000 {
163 reg = <0x0 0x9a500000 163 reg = <0x0 0x9a500000 0x0 0x600000>;
164 no-map; 164 no-map;
165 }; 165 };
166 }; 166 };
167 167
168 vreg_nvme_0p9: nvme-0p9-regulator { 168 vreg_nvme_0p9: nvme-0p9-regulator {
169 compatible = "regulator-fixed" 169 compatible = "regulator-fixed";
170 regulator-name = "vreg_nvme_0p 170 regulator-name = "vreg_nvme_0p9";
171 171
172 regulator-min-microvolt = <900 172 regulator-min-microvolt = <900000>;
173 regulator-max-microvolt = <900 173 regulator-max-microvolt = <900000>;
174 174
175 regulator-always-on; 175 regulator-always-on;
176 }; 176 };
177 177
178 vreg_nvme_3p3: nvme-3p3-regulator { 178 vreg_nvme_3p3: nvme-3p3-regulator {
179 compatible = "regulator-fixed" 179 compatible = "regulator-fixed";
180 regulator-name = "vreg_nvme_3p 180 regulator-name = "vreg_nvme_3p3";
181 181
182 regulator-min-microvolt = <330 182 regulator-min-microvolt = <3300000>;
183 regulator-max-microvolt = <330 183 regulator-max-microvolt = <3300000>;
184 184
185 gpio = <&pmc8180c_gpios 11 0>; 185 gpio = <&pmc8180c_gpios 11 0>;
186 enable-active-high; 186 enable-active-high;
187 187
188 regulator-always-on; 188 regulator-always-on;
189 }; 189 };
190 190
191 vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator 191 vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator {
192 compatible = "regulator-fixed" 192 compatible = "regulator-fixed";
193 regulator-name = "vdd_kb_tp_3v 193 regulator-name = "vdd_kb_tp_3v3";
194 regulator-min-microvolt = <330 194 regulator-min-microvolt = <3300000>;
195 regulator-max-microvolt = <330 195 regulator-max-microvolt = <3300000>;
196 196
197 gpio = <&tlmm 4 GPIO_ACTIVE_HI 197 gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
198 enable-active-high; 198 enable-active-high;
199 199
200 regulator-always-on; 200 regulator-always-on;
201 201
202 pinctrl-names = "default"; 202 pinctrl-names = "default";
203 pinctrl-0 = <&kb_tp_3v3_en_act 203 pinctrl-0 = <&kb_tp_3v3_en_active_state>;
204 }; 204 };
205 205
206 vph_pwr: vph-pwr-regulator { 206 vph_pwr: vph-pwr-regulator {
207 compatible = "regulator-fixed" 207 compatible = "regulator-fixed";
208 regulator-name = "vph_pwr"; 208 regulator-name = "vph_pwr";
209 regulator-min-microvolt = <370 209 regulator-min-microvolt = <3700000>;
210 regulator-max-microvolt = <370 210 regulator-max-microvolt = <3700000>;
211 }; 211 };
212 212
213 vreg_s4a_1p8: pm8150-s4 { 213 vreg_s4a_1p8: pm8150-s4 {
214 compatible = "regulator-fixed" 214 compatible = "regulator-fixed";
215 regulator-name = "vreg_s4a_1p8 215 regulator-name = "vreg_s4a_1p8";
216 216
217 regulator-min-microvolt = <180 217 regulator-min-microvolt = <1800000>;
218 regulator-max-microvolt = <180 218 regulator-max-microvolt = <1800000>;
219 219
220 regulator-always-on; 220 regulator-always-on;
221 regulator-boot-on; 221 regulator-boot-on;
222 222
223 vin-supply = <&vph_pwr>; 223 vin-supply = <&vph_pwr>;
224 }; 224 };
225 225
226 vreg_usb2_host_en: regulator-usb2-host 226 vreg_usb2_host_en: regulator-usb2-host-en {
227 compatible = "regulator-fixed" 227 compatible = "regulator-fixed";
228 regulator-name = "usb2_host_en 228 regulator-name = "usb2_host_en";
229 229
230 regulator-min-microvolt = <500 230 regulator-min-microvolt = <5000000>;
231 regulator-max-microvolt = <500 231 regulator-max-microvolt = <5000000>;
232 232
233 gpio = <&pmc8180_1_gpios 9 GPI 233 gpio = <&pmc8180_1_gpios 9 GPIO_ACTIVE_HIGH>;
234 enable-active-high; 234 enable-active-high;
235 235
236 regulator-always-on; 236 regulator-always-on;
237 }; 237 };
238 238
239 vreg_usb3_host_en: regulator-usb3-host 239 vreg_usb3_host_en: regulator-usb3-host-en {
240 compatible = "regulator-fixed" 240 compatible = "regulator-fixed";
241 regulator-name = "usb3_host_en 241 regulator-name = "usb3_host_en";
242 242
243 regulator-min-microvolt = <500 243 regulator-min-microvolt = <5000000>;
244 regulator-max-microvolt = <500 244 regulator-max-microvolt = <5000000>;
245 245
246 gpio = <&pmc8180_2_gpios 9 GPI 246 gpio = <&pmc8180_2_gpios 9 GPIO_ACTIVE_HIGH>;
247 enable-active-high; 247 enable-active-high;
248 248
249 regulator-always-on; 249 regulator-always-on;
250 }; 250 };
251 251
252 usbprim-sbu-mux { 252 usbprim-sbu-mux {
253 compatible = "pericom,pi3usb10 253 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
254 254
255 enable-gpios = <&tlmm 152 GPIO 255 enable-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
256 select-gpios = <&tlmm 100 GPIO 256 select-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
257 257
258 pinctrl-names = "default"; 258 pinctrl-names = "default";
259 pinctrl-0 = <&usbprim_sbu_defa 259 pinctrl-0 = <&usbprim_sbu_default>;
260 260
261 mode-switch; 261 mode-switch;
262 orientation-switch; 262 orientation-switch;
263 263
264 port { 264 port {
265 usbprim_sbu_mux: endpo 265 usbprim_sbu_mux: endpoint {
266 remote-endpoin 266 remote-endpoint = <&pmic_glink_con0_sbu>;
267 }; 267 };
268 }; 268 };
269 }; 269 };
270 270
271 usbsec-sbu-mux { 271 usbsec-sbu-mux {
272 compatible = "pericom,pi3usb10 272 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
273 273
274 enable-gpios = <&tlmm 188 GPIO 274 enable-gpios = <&tlmm 188 GPIO_ACTIVE_LOW>;
275 select-gpios = <&tlmm 187 GPIO 275 select-gpios = <&tlmm 187 GPIO_ACTIVE_HIGH>;
276 276
277 pinctrl-names = "default"; 277 pinctrl-names = "default";
278 pinctrl-0 = <&usbsec_sbu_defau 278 pinctrl-0 = <&usbsec_sbu_default>;
279 279
280 mode-switch; 280 mode-switch;
281 orientation-switch; 281 orientation-switch;
282 282
283 port { 283 port {
284 usbsec_sbu_mux: endpoi 284 usbsec_sbu_mux: endpoint {
285 remote-endpoin 285 remote-endpoint = <&pmic_glink_con1_sbu>;
286 }; 286 };
287 }; 287 };
288 }; 288 };
289 }; 289 };
290 290
291 &apps_rsc { 291 &apps_rsc {
292 regulators-0 { 292 regulators-0 {
293 compatible = "qcom,pmc8180-rpm 293 compatible = "qcom,pmc8180-rpmh-regulators";
294 qcom,pmic-id = "a"; 294 qcom,pmic-id = "a";
295 295
296 vdd-s5-supply = <&vph_pwr>; 296 vdd-s5-supply = <&vph_pwr>;
297 vdd-l7-l12-l14-l15-supply = <& 297 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
298 298
299 vreg_s5a_2p0: smps5 { 299 vreg_s5a_2p0: smps5 {
300 regulator-min-microvol 300 regulator-min-microvolt = <2040000>;
301 regulator-max-microvol 301 regulator-max-microvolt = <2100000>;
302 }; 302 };
303 303
304 vreg_l7a_1p8: ldo7 { 304 vreg_l7a_1p8: ldo7 {
305 regulator-min-microvol 305 regulator-min-microvolt = <1800000>;
306 regulator-max-microvol 306 regulator-max-microvolt = <1800000>;
307 regulator-initial-mode 307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 }; 308 };
309 309
310 vreg_l9a_1p3: ldo9 { 310 vreg_l9a_1p3: ldo9 {
311 regulator-min-microvol 311 regulator-min-microvolt = <1296000>;
312 regulator-max-microvol 312 regulator-max-microvolt = <1304000>;
313 regulator-initial-mode 313 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
314 }; 314 };
315 315
316 vreg_l12a_1p8: ldo12 { 316 vreg_l12a_1p8: ldo12 {
317 regulator-min-microvol 317 regulator-min-microvolt = <1800000>;
318 regulator-max-microvol 318 regulator-max-microvolt = <1800000>;
319 regulator-initial-mode 319 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
320 }; 320 };
321 }; 321 };
322 322
323 regulators-1 { 323 regulators-1 {
324 compatible = "qcom,pmc8180c-rp 324 compatible = "qcom,pmc8180c-rpmh-regulators";
325 qcom,pmic-id = "c"; 325 qcom,pmic-id = "c";
326 326
327 vdd-s6-supply = <&vph_pwr>; 327 vdd-s6-supply = <&vph_pwr>;
328 vdd-s8-supply = <&vph_pwr>; 328 vdd-s8-supply = <&vph_pwr>;
329 vdd-l2-l3-supply = <&vreg_s6c_ 329 vdd-l2-l3-supply = <&vreg_s6c_1p35>;
330 vdd-bob-supply = <&vph_pwr>; 330 vdd-bob-supply = <&vph_pwr>;
331 331
332 vreg_s6c_1p35: smps6 { 332 vreg_s6c_1p35: smps6 {
333 regulator-min-microvol 333 regulator-min-microvolt = <1350000>;
334 regulator-max-microvol 334 regulator-max-microvolt = <1372000>;
335 regulator-initial-mode 335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 }; 336 };
337 337
338 vreg_s8c_1p8: smps8 { 338 vreg_s8c_1p8: smps8 {
339 regulator-min-microvol 339 regulator-min-microvolt = <1800000>;
340 regulator-max-microvol 340 regulator-max-microvolt = <1800000>;
341 regulator-initial-mode 341 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
342 regulator-always-on; 342 regulator-always-on;
343 }; 343 };
344 344
345 vreg_l3c_1p2: ldo3 { 345 vreg_l3c_1p2: ldo3 {
346 regulator-min-microvol 346 regulator-min-microvolt = <1200000>;
347 regulator-max-microvol 347 regulator-max-microvolt = <1200000>;
348 regulator-initial-mode 348 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
349 }; 349 };
350 350
351 vreg_l4c_3p3: ldo4 { 351 vreg_l4c_3p3: ldo4 {
352 regulator-min-microvol 352 regulator-min-microvolt = <3008000>;
353 regulator-max-microvol 353 regulator-max-microvolt = <3008000>;
354 regulator-initial-mode 354 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
355 }; 355 };
356 356
357 vreg_l10c_3p3: ldo10 { 357 vreg_l10c_3p3: ldo10 {
358 regulator-min-microvol 358 regulator-min-microvolt = <3000000>;
359 regulator-max-microvol 359 regulator-max-microvolt = <3312000>;
360 regulator-initial-mode 360 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
361 }; 361 };
362 362
363 vreg_l11c_3p3: ldo11 { 363 vreg_l11c_3p3: ldo11 {
364 regulator-min-microvol 364 regulator-min-microvolt = <3296000>;
365 regulator-max-microvol 365 regulator-max-microvolt = <3304000>;
366 regulator-initial-mode 366 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
367 }; 367 };
368 368
369 vreg_bob: bob { 369 vreg_bob: bob {
370 regulator-min-microvol 370 regulator-min-microvolt = <3296000>;
371 regulator-max-microvol 371 regulator-max-microvolt = <3350000>;
372 regulator-initial-mode 372 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
373 }; 373 };
374 }; 374 };
375 375
376 regulators-2 { 376 regulators-2 {
377 compatible = "qcom,pmc8180-rpm 377 compatible = "qcom,pmc8180-rpmh-regulators";
378 qcom,pmic-id = "e"; 378 qcom,pmic-id = "e";
379 379
380 vdd-s4-supply = <&vph_pwr>; 380 vdd-s4-supply = <&vph_pwr>;
381 vdd-s5-supply = <&vph_pwr>; 381 vdd-s5-supply = <&vph_pwr>;
382 vdd-l2-l10-supply = <&vreg_bob 382 vdd-l2-l10-supply = <&vreg_bob>;
383 vdd-l3-l4-l5-l18-supply = <&vr 383 vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
384 vdd-l7-l12-l14-l15-supply = <& 384 vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
385 vdd-l13-l16-l17-supply = <&vre 385 vdd-l13-l16-l17-supply = <&vreg_bob>;
386 386
387 vreg_s4e_0p98: smps4 { 387 vreg_s4e_0p98: smps4 {
388 regulator-min-microvol 388 regulator-min-microvolt = <992000>;
389 regulator-max-microvol 389 regulator-max-microvolt = <992000>;
390 regulator-initial-mode 390 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
391 }; 391 };
392 392
393 vreg_s5e_2p05: smps5 { 393 vreg_s5e_2p05: smps5 {
394 regulator-min-microvol 394 regulator-min-microvolt = <2040000>;
395 regulator-max-microvol 395 regulator-max-microvolt = <2040000>;
396 regulator-initial-mode 396 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
397 }; 397 };
398 398
399 vreg_l1e_0p75: ldo1 { 399 vreg_l1e_0p75: ldo1 {
400 regulator-min-microvol 400 regulator-min-microvolt = <752000>;
401 regulator-max-microvol 401 regulator-max-microvolt = <752000>;
402 regulator-initial-mode 402 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
403 }; 403 };
404 404
405 vreg_l5e_0p88: ldo5 { 405 vreg_l5e_0p88: ldo5 {
406 regulator-min-microvol 406 regulator-min-microvolt = <880000>;
407 regulator-max-microvol 407 regulator-max-microvolt = <880000>;
408 regulator-initial-mode 408 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
409 }; 409 };
410 410
411 vreg_l7e_1p8: ldo7 { 411 vreg_l7e_1p8: ldo7 {
412 regulator-min-microvol 412 regulator-min-microvolt = <1800000>;
413 regulator-max-microvol 413 regulator-max-microvolt = <1800000>;
414 regulator-initial-mode 414 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
415 regulator-allowed-mode 415 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
416 416 RPMH_REGULATOR_MODE_HPM>;
417 regulator-allow-set-lo 417 regulator-allow-set-load;
418 }; 418 };
419 419
420 vreg_l10e_2p9: ldo10 { 420 vreg_l10e_2p9: ldo10 {
421 regulator-min-microvol 421 regulator-min-microvolt = <2904000>;
422 regulator-max-microvol 422 regulator-max-microvolt = <2904000>;
423 regulator-initial-mode 423 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
424 regulator-allowed-mode 424 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
425 425 RPMH_REGULATOR_MODE_HPM>;
426 regulator-allow-set-lo 426 regulator-allow-set-load;
427 }; 427 };
428 428
429 vreg_l12e: ldo12 { 429 vreg_l12e: ldo12 {
430 regulator-min-microvol 430 regulator-min-microvolt = <1800000>;
431 regulator-max-microvol 431 regulator-max-microvolt = <1800000>;
432 regulator-initial-mode 432 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
433 }; 433 };
434 434
435 vreg_l16e_3p0: ldo16 { 435 vreg_l16e_3p0: ldo16 {
436 regulator-min-microvol 436 regulator-min-microvolt = <3072000>;
437 regulator-max-microvol 437 regulator-max-microvolt = <3072000>;
438 regulator-initial-mode 438 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
439 }; 439 };
440 }; 440 };
441 }; 441 };
442 442
443 &gpu { 443 &gpu {
444 status = "okay"; 444 status = "okay";
445 445
446 zap-shader { 446 zap-shader {
447 memory-region = <&gpu_mem>; 447 memory-region = <&gpu_mem>;
448 firmware-name = "qcom/sc8180x/ 448 firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
449 }; 449 };
450 }; 450 };
451 451
452 &i2c1 { 452 &i2c1 {
453 clock-frequency = <100000>; 453 clock-frequency = <100000>;
454 454
455 pinctrl-names = "default"; 455 pinctrl-names = "default";
456 pinctrl-0 = <&ts_i2c_active_state>; 456 pinctrl-0 = <&ts_i2c_active_state>;
457 457
458 status = "okay"; 458 status = "okay";
459 459
460 touchscreen@10 { 460 touchscreen@10 {
461 compatible = "hid-over-i2c"; 461 compatible = "hid-over-i2c";
462 reg = <0x10>; 462 reg = <0x10>;
463 hid-descr-addr = <0x1>; 463 hid-descr-addr = <0x1>;
464 464
465 vdd-supply = <&vreg_l4c_3p3>; 465 vdd-supply = <&vreg_l4c_3p3>;
466 vddl-supply = <&vreg_l12e>; 466 vddl-supply = <&vreg_l12e>;
467 467
468 post-power-on-delay-ms = <20>; 468 post-power-on-delay-ms = <20>;
469 469
470 interrupts-extended = <&tlmm 1 470 interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
471 471
472 pinctrl-names = "default"; 472 pinctrl-names = "default";
473 pinctrl-0 = <&ts_active_state> 473 pinctrl-0 = <&ts_active_state>;
474 }; 474 };
475 }; 475 };
476 476
477 &i2c7 { 477 &i2c7 {
478 clock-frequency = <100000>; 478 clock-frequency = <100000>;
479 479
480 pinctrl-names = "default"; 480 pinctrl-names = "default";
481 pinctrl-0 = <&aux_i2c_active_state>; 481 pinctrl-0 = <&aux_i2c_active_state>;
482 482
483 status = "okay"; 483 status = "okay";
484 484
485 touchpad@15 { 485 touchpad@15 {
486 compatible = "hid-over-i2c"; 486 compatible = "hid-over-i2c";
487 reg = <0x15>; 487 reg = <0x15>;
488 hid-descr-addr = <0x1>; 488 hid-descr-addr = <0x1>;
489 489
490 interrupts-extended = <&tlmm 2 490 interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
491 491
492 pinctrl-names = "default"; 492 pinctrl-names = "default";
493 pinctrl-0 = <&tp_int_active_st 493 pinctrl-0 = <&tp_int_active_state>;
494 494
495 vdd-supply = <&vdd_kb_tp_3v3>; 495 vdd-supply = <&vdd_kb_tp_3v3>;
496 }; 496 };
497 497
498 keyboard@3a { 498 keyboard@3a {
499 compatible = "hid-over-i2c"; 499 compatible = "hid-over-i2c";
500 reg = <0x3a>; 500 reg = <0x3a>;
501 hid-descr-addr = <0x1>; 501 hid-descr-addr = <0x1>;
502 interrupts-extended = <&tlmm 3 502 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
503 503
504 pinctrl-names = "default"; 504 pinctrl-names = "default";
505 pinctrl-0 = <&kb_int_active_st 505 pinctrl-0 = <&kb_int_active_state>;
506 506
507 vdd-supply = <&vdd_kb_tp_3v3>; 507 vdd-supply = <&vdd_kb_tp_3v3>;
508 }; 508 };
509 }; 509 };
510 510
511 &mdss { 511 &mdss {
512 status = "okay"; 512 status = "okay";
513 }; 513 };
514 514
515 &mdss_dp0 { 515 &mdss_dp0 {
516 status = "okay"; 516 status = "okay";
517 }; 517 };
518 518
519 &mdss_dp0_out { 519 &mdss_dp0_out {
520 data-lanes = <0 1>; 520 data-lanes = <0 1>;
521 remote-endpoint = <&usb_prim_qmpphy_dp 521 remote-endpoint = <&usb_prim_qmpphy_dp_in>;
522 }; 522 };
523 523
524 &mdss_dp1 { 524 &mdss_dp1 {
525 status = "okay"; 525 status = "okay";
526 }; 526 };
527 527
528 &mdss_dp1_out { 528 &mdss_dp1_out {
529 data-lanes = <0 1>; 529 data-lanes = <0 1>;
530 remote-endpoint = <&usb_sec_qmpphy_dp_ 530 remote-endpoint = <&usb_sec_qmpphy_dp_in>;
531 }; 531 };
532 532
533 &mdss_edp { 533 &mdss_edp {
534 data-lanes = <0 1 2 3>; 534 data-lanes = <0 1 2 3>;
535 535
536 pinctrl-names = "default"; 536 pinctrl-names = "default";
537 pinctrl-0 = <&edp_hpd_active>; 537 pinctrl-0 = <&edp_hpd_active>;
538 538
539 status = "okay"; 539 status = "okay";
540 540
541 aux-bus { 541 aux-bus {
542 panel { 542 panel {
543 compatible = "edp-pane 543 compatible = "edp-panel";
544 544
545 backlight = <&backligh 545 backlight = <&backlight>;
546 546
547 port { 547 port {
548 auo_b133han05_ 548 auo_b133han05_in: endpoint {
549 remote 549 remote-endpoint = <&mdss_edp_out>;
550 }; 550 };
551 }; 551 };
552 }; 552 };
553 }; 553 };
554 554
555 ports { 555 ports {
556 port@1 { 556 port@1 {
557 reg = <1>; 557 reg = <1>;
558 mdss_edp_out: endpoint 558 mdss_edp_out: endpoint {
559 remote-endpoin 559 remote-endpoint = <&auo_b133han05_in>;
560 }; 560 };
561 }; 561 };
562 }; 562 };
563 }; 563 };
564 564
565 &pcie1 { 565 &pcie1 {
566 perst-gpios = <&tlmm 175 GPIO_ACTIVE_L 566 perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
567 wake-gpios = <&tlmm 177 GPIO_ACTIVE_HI 567 wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>;
568 pinctrl-names = "default"; 568 pinctrl-names = "default";
569 pinctrl-0 = <&pcie2_default_state>; 569 pinctrl-0 = <&pcie2_default_state>;
570 570
571 status = "okay"; 571 status = "okay";
572 }; 572 };
573 573
574 &pcie1_phy { 574 &pcie1_phy {
575 vdda-phy-supply = <&vreg_l5e_0p88>; 575 vdda-phy-supply = <&vreg_l5e_0p88>;
576 vdda-pll-supply = <&vreg_l3c_1p2>; 576 vdda-pll-supply = <&vreg_l3c_1p2>;
577 577
578 status = "okay"; 578 status = "okay";
579 }; 579 };
580 580
581 &pmc8180_pwrkey { 581 &pmc8180_pwrkey {
582 status = "okay"; 582 status = "okay";
583 }; 583 };
584 584
585 &pmc8180c_lpg { 585 &pmc8180c_lpg {
586 status = "okay"; 586 status = "okay";
587 }; 587 };
588 588
589 &qupv3_id_0 { 589 &qupv3_id_0 {
590 status = "okay"; 590 status = "okay";
591 }; 591 };
592 592
593 &qupv3_id_1 { 593 &qupv3_id_1 {
594 status = "okay"; 594 status = "okay";
595 }; 595 };
596 596
597 &qupv3_id_2 { 597 &qupv3_id_2 {
598 status = "okay"; 598 status = "okay";
599 }; 599 };
600 600
601 &remoteproc_adsp { 601 &remoteproc_adsp {
602 memory-region = <&adsp_mem>; 602 memory-region = <&adsp_mem>;
603 firmware-name = "qcom/sc8180x/qcadsp81 603 firmware-name = "qcom/sc8180x/qcadsp8180.mbn";
604 604
605 status = "okay"; 605 status = "okay";
606 }; 606 };
607 607
608 &remoteproc_mpss { 608 &remoteproc_mpss {
609 memory-region = <&mpss_mem>; 609 memory-region = <&mpss_mem>;
610 firmware-name = "qcom/sc8180x/qcmpss81 610 firmware-name = "qcom/sc8180x/qcmpss8180.mbn";
611 611
612 status = "okay"; 612 status = "okay";
613 }; 613 };
614 614
615 &uart12 { 615 &uart12 {
616 compatible = "qcom,geni-debug-uart"; 616 compatible = "qcom,geni-debug-uart";
617 status = "okay"; 617 status = "okay";
618 }; 618 };
619 619
620 &uart13 { 620 &uart13 {
621 pinctrl-names = "default"; 621 pinctrl-names = "default";
622 pinctrl-0 = <&uart13_state>; 622 pinctrl-0 = <&uart13_state>;
623 623
624 status = "okay"; 624 status = "okay";
625 625
626 bluetooth { 626 bluetooth {
627 compatible = "qcom,wcn3998-bt" 627 compatible = "qcom,wcn3998-bt";
628 628
629 vddio-supply = <&vreg_s4a_1p8> 629 vddio-supply = <&vreg_s4a_1p8>;
630 vddxo-supply = <&vreg_l7a_1p8> 630 vddxo-supply = <&vreg_l7a_1p8>;
631 vddrf-supply = <&vreg_l9a_1p3> 631 vddrf-supply = <&vreg_l9a_1p3>;
632 vddch0-supply = <&vreg_l11c_3p 632 vddch0-supply = <&vreg_l11c_3p3>;
633 max-speed = <3200000>; 633 max-speed = <3200000>;
634 }; 634 };
635 }; 635 };
636 636
637 &ufs_mem_hc { 637 &ufs_mem_hc {
638 reset-gpios = <&tlmm 190 GPIO_ACTIVE_L 638 reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
639 639
640 vcc-supply = <&vreg_l10e_2p9>; 640 vcc-supply = <&vreg_l10e_2p9>;
641 vcc-max-microamp = <155000>; 641 vcc-max-microamp = <155000>;
642 642
643 vccq2-supply = <&vreg_l7e_1p8>; 643 vccq2-supply = <&vreg_l7e_1p8>;
644 vccq2-max-microamp = <425000>; 644 vccq2-max-microamp = <425000>;
645 645
646 status = "okay"; 646 status = "okay";
647 }; 647 };
648 648
649 &ufs_mem_phy { 649 &ufs_mem_phy {
650 vdda-phy-supply = <&vreg_l5e_0p88>; 650 vdda-phy-supply = <&vreg_l5e_0p88>;
651 vdda-pll-supply = <&vreg_l3c_1p2>; 651 vdda-pll-supply = <&vreg_l3c_1p2>;
652 652
653 status = "okay"; 653 status = "okay";
654 }; 654 };
655 655
656 &usb_mp { 656 &usb_mp {
657 status = "okay"; 657 status = "okay";
658 }; 658 };
659 659
660 &usb_mp_hsphy0 { 660 &usb_mp_hsphy0 {
661 vdda-pll-supply = <&vreg_l5e_0p88>; 661 vdda-pll-supply = <&vreg_l5e_0p88>;
662 vdda18-supply = <&vreg_l12a_1p8>; 662 vdda18-supply = <&vreg_l12a_1p8>;
663 vdda33-supply = <&vreg_l16e_3p0>; 663 vdda33-supply = <&vreg_l16e_3p0>;
664 664
665 status = "okay"; 665 status = "okay";
666 }; 666 };
667 667
668 &usb_mp_hsphy1 { 668 &usb_mp_hsphy1 {
669 vdda-pll-supply = <&vreg_l5e_0p88>; 669 vdda-pll-supply = <&vreg_l5e_0p88>;
670 vdda18-supply = <&vreg_l12a_1p8>; 670 vdda18-supply = <&vreg_l12a_1p8>;
671 vdda33-supply = <&vreg_l16e_3p0>; 671 vdda33-supply = <&vreg_l16e_3p0>;
672 672
673 status = "okay"; 673 status = "okay";
674 }; 674 };
675 675
676 &usb_mp_qmpphy0 { 676 &usb_mp_qmpphy0 {
677 vdda-phy-supply = <&vreg_l3c_1p2>; 677 vdda-phy-supply = <&vreg_l3c_1p2>;
678 vdda-pll-supply = <&vreg_l5e_0p88>; 678 vdda-pll-supply = <&vreg_l5e_0p88>;
679 679
680 status = "okay"; 680 status = "okay";
681 }; 681 };
682 682
683 &usb_mp_qmpphy1 { 683 &usb_mp_qmpphy1 {
684 vdda-phy-supply = <&vreg_l3c_1p2>; 684 vdda-phy-supply = <&vreg_l3c_1p2>;
685 vdda-pll-supply = <&vreg_l5e_0p88>; 685 vdda-pll-supply = <&vreg_l5e_0p88>;
686 686
687 status = "okay"; 687 status = "okay";
688 }; 688 };
689 689
690 &usb_prim_hsphy { 690 &usb_prim_hsphy {
691 vdda-pll-supply = <&vreg_l5e_0p88>; 691 vdda-pll-supply = <&vreg_l5e_0p88>;
692 vdda18-supply = <&vreg_l12a_1p8>; 692 vdda18-supply = <&vreg_l12a_1p8>;
693 vdda33-supply = <&vreg_l16e_3p0>; 693 vdda33-supply = <&vreg_l16e_3p0>;
694 694
695 status = "okay"; 695 status = "okay";
696 }; 696 };
697 697
698 &usb_prim_qmpphy { 698 &usb_prim_qmpphy {
699 vdda-phy-supply = <&vreg_l3c_1p2>; 699 vdda-phy-supply = <&vreg_l3c_1p2>;
700 vdda-pll-supply = <&vreg_l5e_0p88>; 700 vdda-pll-supply = <&vreg_l5e_0p88>;
701 701
702 orientation-switch; 702 orientation-switch;
703 703
704 status = "okay"; 704 status = "okay";
705 }; 705 };
706 706
707 &usb_prim { 707 &usb_prim {
708 status = "okay"; 708 status = "okay";
709 }; 709 };
710 710
711 &usb_prim_dwc3 { 711 &usb_prim_dwc3 {
712 dr_mode = "host"; 712 dr_mode = "host";
713 }; 713 };
714 714
715 &usb_prim_dwc3_hs { 715 &usb_prim_dwc3_hs {
716 remote-endpoint = <&pmic_glink_con0_hs 716 remote-endpoint = <&pmic_glink_con0_hs>;
717 }; 717 };
718 718
719 &usb_prim_qmpphy_dp_in { 719 &usb_prim_qmpphy_dp_in {
720 remote-endpoint = <&mdss_dp0_out>; 720 remote-endpoint = <&mdss_dp0_out>;
721 }; 721 };
722 722
723 &usb_prim_qmpphy_out { 723 &usb_prim_qmpphy_out {
724 remote-endpoint = <&pmic_glink_con0_ss 724 remote-endpoint = <&pmic_glink_con0_ss>;
725 }; 725 };
726 726
727 &usb_sec_hsphy { 727 &usb_sec_hsphy {
728 vdda-pll-supply = <&vreg_l5e_0p88>; 728 vdda-pll-supply = <&vreg_l5e_0p88>;
729 vdda18-supply = <&vreg_l12a_1p8>; 729 vdda18-supply = <&vreg_l12a_1p8>;
730 vdda33-supply = <&vreg_l16e_3p0>; 730 vdda33-supply = <&vreg_l16e_3p0>;
731 731
732 status = "okay"; 732 status = "okay";
733 }; 733 };
734 734
735 &usb_sec_qmpphy { 735 &usb_sec_qmpphy {
736 vdda-phy-supply = <&vreg_l3c_1p2>; 736 vdda-phy-supply = <&vreg_l3c_1p2>;
737 vdda-pll-supply = <&vreg_l5e_0p88>; 737 vdda-pll-supply = <&vreg_l5e_0p88>;
738 738
739 orientation-switch; 739 orientation-switch;
740 740
741 status = "okay"; 741 status = "okay";
742 }; 742 };
743 743
744 &usb_sec_qmpphy_dp_in { 744 &usb_sec_qmpphy_dp_in {
745 remote-endpoint = <&mdss_dp1_out>; 745 remote-endpoint = <&mdss_dp1_out>;
746 }; 746 };
747 747
748 &usb_sec_qmpphy_out { 748 &usb_sec_qmpphy_out {
749 remote-endpoint = <&pmic_glink_con1_ss 749 remote-endpoint = <&pmic_glink_con1_ss>;
750 }; 750 };
751 751
752 &usb_sec { 752 &usb_sec {
753 status = "okay"; 753 status = "okay";
754 }; 754 };
755 755
756 &usb_sec_dwc3 { 756 &usb_sec_dwc3 {
757 dr_mode = "host"; 757 dr_mode = "host";
758 }; 758 };
759 759
760 &usb_sec_dwc3_hs { 760 &usb_sec_dwc3_hs {
761 remote-endpoint = <&pmic_glink_con1_hs 761 remote-endpoint = <&pmic_glink_con1_hs>;
762 }; 762 };
763 763
764 &wifi { 764 &wifi {
765 memory-region = <&wlan_mem>; 765 memory-region = <&wlan_mem>;
766 766
767 vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75 767 vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
768 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 768 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
769 vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; 769 vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
770 vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; 770 vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
771 vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; 771 vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
772 772
773 status = "okay"; 773 status = "okay";
774 }; 774 };
775 775
776 &xo_board_clk { 776 &xo_board_clk {
777 clock-frequency = <38400000>; 777 clock-frequency = <38400000>;
778 }; 778 };
779 779
780 /* PINCTRL */ 780 /* PINCTRL */
781 781
782 &pmc8180c_gpios { 782 &pmc8180c_gpios {
783 bl_pwm_default: bl-pwm-default-state { 783 bl_pwm_default: bl-pwm-default-state {
784 en-pins { 784 en-pins {
785 pins = "gpio8"; 785 pins = "gpio8";
786 function = "normal"; 786 function = "normal";
787 }; 787 };
788 788
789 pwm-pins { 789 pwm-pins {
790 pins = "gpio10"; 790 pins = "gpio10";
791 function = "func1"; 791 function = "func1";
792 }; 792 };
793 }; 793 };
794 }; 794 };
795 795
796 &tlmm { 796 &tlmm {
797 gpio-reserved-ranges = <0 4>, <47 4>, 797 gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
798 798
799 aux_i2c_active_state: aux-i2c-active-s 799 aux_i2c_active_state: aux-i2c-active-state {
800 pins = "gpio98", "gpio99"; 800 pins = "gpio98", "gpio99";
801 function = "qup7"; 801 function = "qup7";
802 802
803 bias-disable; 803 bias-disable;
804 drive-strength = <16>; 804 drive-strength = <16>;
805 }; 805 };
806 806
807 edp_hpd_active: epd-hpd-active-state { 807 edp_hpd_active: epd-hpd-active-state {
808 pins = "gpio10"; 808 pins = "gpio10";
809 function = "edp_hot"; 809 function = "edp_hot";
810 }; 810 };
811 811
812 hall_int_active_state: hall-int-active 812 hall_int_active_state: hall-int-active-state {
813 pins = "gpio121"; 813 pins = "gpio121";
814 function = "gpio"; 814 function = "gpio";
815 815
816 bias-disable; 816 bias-disable;
817 }; 817 };
818 818
819 kb_int_active_state: kb-int-active-sta 819 kb_int_active_state: kb-int-active-state {
820 int-n-pins { 820 int-n-pins {
821 pins = "gpio37"; 821 pins = "gpio37";
822 function = "gpio"; 822 function = "gpio";
823 823
824 bias-pull-up; 824 bias-pull-up;
825 }; 825 };
826 826
827 kp-disable-pins { 827 kp-disable-pins {
828 pins = "gpio135"; 828 pins = "gpio135";
829 function = "gpio"; 829 function = "gpio";
830 830
831 output-high; 831 output-high;
832 }; 832 };
833 }; 833 };
834 834
835 kb_tp_3v3_en_active_state: kb-tp-3v3-e 835 kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state {
836 pins = "gpio4"; 836 pins = "gpio4";
837 function = "gpio"; 837 function = "gpio";
838 838
839 bias-disable; 839 bias-disable;
840 }; 840 };
841 841
842 pcie2_default_state: pcie2-default-sta 842 pcie2_default_state: pcie2-default-state {
843 clkreq-pins { 843 clkreq-pins {
844 pins = "gpio176"; 844 pins = "gpio176";
845 function = "pci_e2"; 845 function = "pci_e2";
846 bias-pull-up; 846 bias-pull-up;
847 }; 847 };
848 848
849 reset-n-pins { 849 reset-n-pins {
850 pins = "gpio175"; 850 pins = "gpio175";
851 function = "gpio"; 851 function = "gpio";
852 852
853 drive-strength = <2>; 853 drive-strength = <2>;
854 output-low; 854 output-low;
855 bias-pull-down; 855 bias-pull-down;
856 }; 856 };
857 857
858 wake-n-pins { 858 wake-n-pins {
859 pins = "gpio177"; 859 pins = "gpio177";
860 function = "gpio"; 860 function = "gpio";
861 861
862 drive-strength = <2>; 862 drive-strength = <2>;
863 bias-pull-up; 863 bias-pull-up;
864 }; 864 };
865 }; 865 };
866 866
867 usbprim_sbu_default: usbprim-sbu-state 867 usbprim_sbu_default: usbprim-sbu-state {
868 oe-n-pins { 868 oe-n-pins {
869 pins = "gpio152"; 869 pins = "gpio152";
870 function = "gpio"; 870 function = "gpio";
871 bias-disable; 871 bias-disable;
872 drive-strength = <16>; 872 drive-strength = <16>;
873 output-high; 873 output-high;
874 }; 874 };
875 875
876 sel-pins { 876 sel-pins {
877 pins = "gpio100"; 877 pins = "gpio100";
878 function = "gpio"; 878 function = "gpio";
879 bias-disable; 879 bias-disable;
880 drive-strength = <16>; 880 drive-strength = <16>;
881 }; 881 };
882 }; 882 };
883 883
884 usbsec_sbu_default: usbsec-sbu-state { 884 usbsec_sbu_default: usbsec-sbu-state {
885 oe-n-pins { 885 oe-n-pins {
886 pins = "gpio188"; 886 pins = "gpio188";
887 function = "gpio"; 887 function = "gpio";
888 bias-disable; 888 bias-disable;
889 drive-strength = <16>; 889 drive-strength = <16>;
890 output-high; 890 output-high;
891 }; 891 };
892 892
893 sel-pins { 893 sel-pins {
894 pins = "gpio187"; 894 pins = "gpio187";
895 function = "gpio"; 895 function = "gpio";
896 bias-disable; 896 bias-disable;
897 drive-strength = <16>; 897 drive-strength = <16>;
898 }; 898 };
899 }; 899 };
900 900
901 tp_int_active_state: tp-int-active-sta 901 tp_int_active_state: tp-int-active-state {
902 tp-int-pins { 902 tp-int-pins {
903 pins = "gpio24"; 903 pins = "gpio24";
904 function = "gpio"; 904 function = "gpio";
905 905
906 bias-disable; 906 bias-disable;
907 }; 907 };
908 908
909 tp-close-n-pins { 909 tp-close-n-pins {
910 pins = "gpio116"; 910 pins = "gpio116";
911 function = "gpio"; 911 function = "gpio";
912 912
913 bias-disable; 913 bias-disable;
914 }; 914 };
915 }; 915 };
916 916
917 ts_active_state: ts-active-state { 917 ts_active_state: ts-active-state {
918 int-n-pins { 918 int-n-pins {
919 pins = "gpio122"; 919 pins = "gpio122";
920 function = "gpio"; 920 function = "gpio";
921 921
922 bias-disable; 922 bias-disable;
923 }; 923 };
924 924
925 reset-n-pins { 925 reset-n-pins {
926 pins = "gpio54"; 926 pins = "gpio54";
927 function = "gpio"; 927 function = "gpio";
928 928
929 output-high; 929 output-high;
930 }; 930 };
931 }; 931 };
932 932
933 ts_i2c_active_state: ts-i2c-active-sta 933 ts_i2c_active_state: ts-i2c-active-state {
934 pins = "gpio114", "gpio115"; 934 pins = "gpio114", "gpio115";
935 function = "qup1"; 935 function = "qup1";
936 936
937 /* External pull up */ 937 /* External pull up */
938 bias-disable; 938 bias-disable;
939 drive-strength = <2>; 939 drive-strength = <2>;
940 }; 940 };
941 941
942 uart13_state: uart13-state { 942 uart13_state: uart13-state {
943 cts-pins { 943 cts-pins {
944 pins = "gpio43"; 944 pins = "gpio43";
945 function = "qup13"; 945 function = "qup13";
946 bias-pull-down; 946 bias-pull-down;
947 }; 947 };
948 948
949 rts-tx-pins { 949 rts-tx-pins {
950 pins = "gpio44", "gpio 950 pins = "gpio44", "gpio45";
951 function = "qup13"; 951 function = "qup13";
952 drive-strength = <2>; 952 drive-strength = <2>;
953 bias-disable; 953 bias-disable;
954 }; 954 };
955 955
956 rx-pins { 956 rx-pins {
957 pins = "gpio46"; 957 pins = "gpio46";
958 function = "qup13"; 958 function = "qup13";
959 bias-pull-up; 959 bias-pull-up;
960 }; 960 };
961 }; 961 };
962 }; 962 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.