1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2021, The Linux Foundation. A 3 * Copyright (c) 2021, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2022, Linaro Limited 4 * Copyright (c) 2022, Linaro Limited
5 */ 5 */
6 6
7 /dts-v1/; 7 /dts-v1/;
8 8
9 #include <dt-bindings/iio/qcom,spmi-adc7-pm835 <<
10 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/gpio/gpio.h>
>> 10 #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
>> 11 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
>> 12 #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
11 #include <dt-bindings/input/gpio-keys.h> 13 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/input/input.h> 14 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/leds/common.h> <<
14 #include <dt-bindings/regulator/qcom,rpmh-regu 15 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
15 16
16 #include "sc8280xp.dtsi" 17 #include "sc8280xp.dtsi"
17 #include "sc8280xp-pmics.dtsi" 18 #include "sc8280xp-pmics.dtsi"
18 19
19 / { 20 / {
20 model = "Lenovo ThinkPad X13s"; 21 model = "Lenovo ThinkPad X13s";
21 compatible = "lenovo,thinkpad-x13s", " 22 compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
22 23
23 aliases { !! 24 backlight {
24 i2c4 = &i2c4; <<
25 i2c21 = &i2c21; <<
26 serial1 = &uart2; <<
27 }; <<
28 <<
29 wcd938x: audio-codec { <<
30 compatible = "qcom,wcd9380-cod <<
31 <<
32 pinctrl-names = "default"; <<
33 pinctrl-0 = <&wcd_default>; <<
34 <<
35 reset-gpios = <&tlmm 106 GPIO_ <<
36 <<
37 vdd-buck-supply = <&vreg_s10b> <<
38 vdd-rxtx-supply = <&vreg_s10b> <<
39 vdd-io-supply = <&vreg_s10b>; <<
40 vdd-mic-bias-supply = <&vreg_b <<
41 <<
42 qcom,micbias1-microvolt = <180 <<
43 qcom,micbias2-microvolt = <180 <<
44 qcom,micbias3-microvolt = <180 <<
45 qcom,micbias4-microvolt = <180 <<
46 qcom,mbhc-buttons-vthreshold-m <<
47 qcom,mbhc-headset-vthreshold-m <<
48 qcom,mbhc-headphone-vthreshold <<
49 qcom,rx-device = <&wcd_rx>; <<
50 qcom,tx-device = <&wcd_tx>; <<
51 <<
52 #sound-dai-cells = <1>; <<
53 }; <<
54 <<
55 backlight: backlight { <<
56 compatible = "pwm-backlight"; 25 compatible = "pwm-backlight";
57 pwms = <&pmc8280c_lpg 3 100000 26 pwms = <&pmc8280c_lpg 3 1000000>;
58 enable-gpios = <&pmc8280_1_gpi 27 enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
59 power-supply = <&vreg_edp_bl>; 28 power-supply = <&vreg_edp_bl>;
60 29
61 pinctrl-names = "default"; 30 pinctrl-names = "default";
62 pinctrl-0 = <&edp_bl_en>, <&ed 31 pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
63 }; 32 };
64 33
65 gpio-keys { !! 34 thermal-zones {
66 compatible = "gpio-keys"; !! 35 skin-temp-thermal {
67 !! 36 polling-delay-passive = <250>;
68 pinctrl-names = "default"; !! 37 polling-delay = <0>;
69 pinctrl-0 = <&hall_int_n_defau !! 38 thermal-sensors = <&pmk8280_adc_tm 5>;
70 <<
71 switch-lid { <<
72 gpios = <&tlmm 107 GPI <<
73 linux,input-type = <EV <<
74 linux,code = <SW_LID>; <<
75 wakeup-source; <<
76 wakeup-event-action = <<
77 }; <<
78 }; <<
79 <<
80 leds { <<
81 compatible = "gpio-leds"; <<
82 <<
83 pinctrl-names = "default"; <<
84 pinctrl-0 = <&cam_indicator_en <<
85 <<
86 led-camera-indicator { <<
87 label = "white:camera- <<
88 function = LED_FUNCTIO <<
89 color = <LED_COLOR_ID_ <<
90 gpios = <&tlmm 28 GPIO <<
91 linux,default-trigger <<
92 default-state = "off"; <<
93 /* Reuse as a panic in <<
94 panic-indicator; <<
95 }; <<
96 }; <<
97 39
98 pmic-glink { !! 40 trips {
99 compatible = "qcom,sc8280xp-pm !! 41 skin_temp_alert0: trip-point0 {
100 !! 42 temperature = <55000>;
101 #address-cells = <1>; !! 43 hysteresis = <1000>;
102 #size-cells = <0>; !! 44 type = "passive";
103 orientation-gpios = <&tlmm 166 <<
104 <&tlmm 49 <<
105 <<
106 connector@0 { <<
107 compatible = "usb-c-co <<
108 reg = <0>; <<
109 power-role = "dual"; <<
110 data-role = "dual"; <<
111 <<
112 ports { <<
113 #address-cells <<
114 #size-cells = <<
115 <<
116 port@0 { <<
117 reg = <<
118 <<
119 pmic_g <<
120 <<
121 }; <<
122 }; 45 };
123 46
124 port@1 { !! 47 skin_temp_alert1: trip-point1 {
125 reg = !! 48 temperature = <58000>;
126 !! 49 hysteresis = <1000>;
127 pmic_g !! 50 type = "passive";
128 <<
129 }; <<
130 }; 51 };
131 52
132 port@2 { !! 53 skin-temp-crit {
133 reg = !! 54 temperature = <73000>;
134 !! 55 hysteresis = <1000>;
135 pmic_g !! 56 type = "critical";
136 <<
137 }; <<
138 }; 57 };
139 }; 58 };
140 }; <<
141 59
142 connector@1 { !! 60 cooling-maps {
143 compatible = "usb-c-co !! 61 map0 {
144 reg = <1>; !! 62 trip = <&skin_temp_alert0>;
145 power-role = "dual"; !! 63 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
146 data-role = "dual"; !! 64 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
147 !! 65 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
148 ports { !! 66 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
149 #address-cells <<
150 #size-cells = <<
151 port@0 { <<
152 reg = <<
153 <<
154 pmic_g <<
155 <<
156 }; <<
157 }; <<
158 <<
159 port@1 { <<
160 reg = <<
161 <<
162 pmic_g <<
163 <<
164 }; <<
165 }; 67 };
166 68
167 port@2 { !! 69 map1 {
168 reg = !! 70 trip = <&skin_temp_alert1>;
169 !! 71 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
170 pmic_g !! 72 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
171 !! 73 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
172 }; !! 74 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
173 }; 75 };
174 }; 76 };
175 }; 77 };
176 }; 78 };
177 79
178 vreg_edp_3p3: regulator-edp-3p3 { !! 80 gpio-keys {
179 compatible = "regulator-fixed" !! 81 compatible = "gpio-keys";
180 <<
181 regulator-name = "VCC3LCD"; <<
182 regulator-min-microvolt = <330 <<
183 regulator-max-microvolt = <330 <<
184 <<
185 gpio = <&tlmm 25 GPIO_ACTIVE_H <<
186 enable-active-high; <<
187 82
188 pinctrl-names = "default"; 83 pinctrl-names = "default";
189 pinctrl-0 = <&edp_reg_en>; !! 84 pinctrl-0 = <&hall_int_n_default>;
190 85
191 regulator-boot-on; !! 86 switch-lid {
>> 87 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
>> 88 linux,input-type = <EV_SW>;
>> 89 linux,code = <SW_LID>;
>> 90 wakeup-source;
>> 91 wakeup-event-action = <EV_ACT_DEASSERTED>;
>> 92 };
192 }; 93 };
193 94
194 vreg_edp_bl: regulator-edp-bl { 95 vreg_edp_bl: regulator-edp-bl {
195 compatible = "regulator-fixed" 96 compatible = "regulator-fixed";
196 97
197 regulator-name = "VBL9"; 98 regulator-name = "VBL9";
198 regulator-min-microvolt = <360 99 regulator-min-microvolt = <3600000>;
199 regulator-max-microvolt = <360 100 regulator-max-microvolt = <3600000>;
200 101
201 gpio = <&pmc8280_1_gpios 9 GPI 102 gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
202 enable-active-high; 103 enable-active-high;
203 104
204 pinctrl-names = "default"; 105 pinctrl-names = "default";
205 pinctrl-0 = <&edp_bl_reg_en>; 106 pinctrl-0 = <&edp_bl_reg_en>;
206 107
207 regulator-boot-on; 108 regulator-boot-on;
208 }; 109 };
209 110
210 vreg_misc_3p3: regulator-misc-3p3 { 111 vreg_misc_3p3: regulator-misc-3p3 {
211 compatible = "regulator-fixed" 112 compatible = "regulator-fixed";
212 113
213 regulator-name = "VCC3B"; 114 regulator-name = "VCC3B";
214 regulator-min-microvolt = <330 115 regulator-min-microvolt = <3300000>;
215 regulator-max-microvolt = <330 116 regulator-max-microvolt = <3300000>;
216 117
217 gpio = <&pmc8280_1_gpios 1 GPI 118 gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
218 enable-active-high; 119 enable-active-high;
219 120
220 pinctrl-names = "default"; 121 pinctrl-names = "default";
221 pinctrl-0 = <&misc_3p3_reg_en> 122 pinctrl-0 = <&misc_3p3_reg_en>;
222 123
223 regulator-boot-on; 124 regulator-boot-on;
224 regulator-always-on; 125 regulator-always-on;
225 }; 126 };
226 127
227 vreg_nvme: regulator-nvme { 128 vreg_nvme: regulator-nvme {
228 compatible = "regulator-fixed" 129 compatible = "regulator-fixed";
229 130
230 regulator-name = "VCC3_SSD"; 131 regulator-name = "VCC3_SSD";
231 regulator-min-microvolt = <330 132 regulator-min-microvolt = <3300000>;
232 regulator-max-microvolt = <330 133 regulator-max-microvolt = <3300000>;
233 134
234 gpio = <&tlmm 135 GPIO_ACTIVE_ 135 gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
235 enable-active-high; 136 enable-active-high;
236 137
237 pinctrl-names = "default"; 138 pinctrl-names = "default";
238 pinctrl-0 = <&nvme_reg_en>; 139 pinctrl-0 = <&nvme_reg_en>;
239 140
240 regulator-boot-on; 141 regulator-boot-on;
241 }; 142 };
242 143
243 vreg_vph_pwr: regulator-vph-pwr { <<
244 compatible = "regulator-fixed" <<
245 <<
246 regulator-name = "VPH_VCC3R9"; <<
247 regulator-min-microvolt = <390 <<
248 regulator-max-microvolt = <390 <<
249 <<
250 regulator-always-on; <<
251 }; <<
252 <<
253 vreg_wlan: regulator-wlan { 144 vreg_wlan: regulator-wlan {
254 compatible = "regulator-fixed" 145 compatible = "regulator-fixed";
255 146
256 regulator-name = "VCC_WLAN_3R9 147 regulator-name = "VCC_WLAN_3R9";
257 regulator-min-microvolt = <390 148 regulator-min-microvolt = <3900000>;
258 regulator-max-microvolt = <390 149 regulator-max-microvolt = <3900000>;
259 150
260 gpio = <&pmr735a_gpios 1 GPIO_ 151 gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
261 enable-active-high; 152 enable-active-high;
262 153
263 pinctrl-names = "default"; 154 pinctrl-names = "default";
264 pinctrl-0 = <&hastings_reg_en> 155 pinctrl-0 = <&hastings_reg_en>;
265 156
266 regulator-boot-on; 157 regulator-boot-on;
267 }; 158 };
268 159
269 vreg_wwan: regulator-wwan { 160 vreg_wwan: regulator-wwan {
270 compatible = "regulator-fixed" 161 compatible = "regulator-fixed";
271 162
272 regulator-name = "VCC3B_WAN"; 163 regulator-name = "VCC3B_WAN";
273 regulator-min-microvolt = <330 164 regulator-min-microvolt = <3300000>;
274 regulator-max-microvolt = <330 165 regulator-max-microvolt = <3300000>;
275 166
276 gpio = <&pmc8280_2_gpios 1 GPI 167 gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
277 enable-active-high; 168 enable-active-high;
278 169
279 pinctrl-names = "default"; 170 pinctrl-names = "default";
280 pinctrl-0 = <&wwan_sw_en>; 171 pinctrl-0 = <&wwan_sw_en>;
281 172
282 regulator-boot-on; 173 regulator-boot-on;
283 }; 174 };
284 <<
285 reserved-memory { <<
286 gpu_mem: gpu-mem@8bf00000 { <<
287 reg = <0 0x8bf00000 0 <<
288 no-map; <<
289 }; <<
290 <<
291 linux,cma { <<
292 compatible = "shared-d <<
293 size = <0x0 0x8000000> <<
294 reusable; <<
295 linux,cma-default; <<
296 }; <<
297 }; <<
298 <<
299 thermal-zones { <<
300 pm8008-thermal { <<
301 polling-delay-passive <<
302 polling-delay = <0>; <<
303 <<
304 thermal-sensors = <&pm <<
305 <<
306 trips { <<
307 trip0 { <<
308 temper <<
309 hyster <<
310 type = <<
311 }; <<
312 <<
313 trip1 { <<
314 temper <<
315 hyster <<
316 type = <<
317 }; <<
318 }; <<
319 }; <<
320 <<
321 skin-temp-thermal { <<
322 polling-delay-passive <<
323 <<
324 thermal-sensors = <&pm <<
325 <<
326 trips { <<
327 skin_temp_aler <<
328 temper <<
329 hyster <<
330 type = <<
331 }; <<
332 <<
333 skin_temp_aler <<
334 temper <<
335 hyster <<
336 type = <<
337 }; <<
338 <<
339 skin-temp-crit <<
340 temper <<
341 hyster <<
342 type = <<
343 }; <<
344 }; <<
345 <<
346 cooling-maps { <<
347 map0 { <<
348 trip = <<
349 coolin <<
350 <<
351 <<
352 <<
353 }; <<
354 <<
355 map1 { <<
356 trip = <<
357 coolin <<
358 <<
359 <<
360 <<
361 }; <<
362 }; <<
363 }; <<
364 }; <<
365 <<
366 usb0-sbu-mux { <<
367 compatible = "pericom,pi3usb10 <<
368 <<
369 enable-gpios = <&tlmm 101 GPIO <<
370 select-gpios = <&tlmm 164 GPIO <<
371 <<
372 pinctrl-names = "default"; <<
373 pinctrl-0 = <&usb0_sbu_default <<
374 <<
375 mode-switch; <<
376 orientation-switch; <<
377 <<
378 port { <<
379 usb0_sbu_mux: endpoint <<
380 remote-endpoin <<
381 }; <<
382 }; <<
383 }; <<
384 <<
385 usb1-sbu-mux { <<
386 compatible = "pericom,pi3usb10 <<
387 <<
388 enable-gpios = <&tlmm 48 GPIO_ <<
389 select-gpios = <&tlmm 47 GPIO_ <<
390 <<
391 pinctrl-names = "default"; <<
392 pinctrl-0 = <&usb1_sbu_default <<
393 <<
394 mode-switch; <<
395 orientation-switch; <<
396 <<
397 port { <<
398 usb1_sbu_mux: endpoint <<
399 remote-endpoin <<
400 }; <<
401 }; <<
402 }; <<
403 }; 175 };
404 176
405 &apps_rsc { 177 &apps_rsc {
406 regulators-0 { !! 178 pmc8280-1-rpmh-regulators {
407 compatible = "qcom,pm8350-rpmh 179 compatible = "qcom,pm8350-rpmh-regulators";
408 qcom,pmic-id = "b"; 180 qcom,pmic-id = "b";
409 181
410 vdd-l1-l4-supply = <&vreg_s12b <<
411 vdd-l2-l7-supply = <&vreg_bob> <<
412 vdd-l3-l5-supply = <&vreg_s11b 182 vdd-l3-l5-supply = <&vreg_s11b>;
413 vdd-l6-l9-l10-supply = <&vreg_ <<
414 vdd-l8-supply = <&vreg_s12b>; <<
415 <<
416 vreg_s10b: smps10 { <<
417 regulator-name = "vreg <<
418 regulator-min-microvol <<
419 regulator-max-microvol <<
420 regulator-initial-mode <<
421 regulator-always-on; <<
422 }; <<
423 183
424 vreg_s11b: smps11 { 184 vreg_s11b: smps11 {
425 regulator-name = "vreg 185 regulator-name = "vreg_s11b";
426 regulator-min-microvol 186 regulator-min-microvolt = <1272000>;
427 regulator-max-microvol 187 regulator-max-microvolt = <1272000>;
428 regulator-initial-mode 188 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
429 regulator-always-on; 189 regulator-always-on;
430 }; 190 };
431 191
432 vreg_s12b: smps12 { <<
433 regulator-name = "vreg <<
434 regulator-min-microvol <<
435 regulator-max-microvol <<
436 regulator-initial-mode <<
437 regulator-always-on; <<
438 }; <<
439 <<
440 vreg_l1b: ldo1 { <<
441 regulator-name = "vreg <<
442 regulator-min-microvol <<
443 regulator-max-microvol <<
444 regulator-initial-mode <<
445 }; <<
446 <<
447 vreg_l3b: ldo3 { 192 vreg_l3b: ldo3 {
448 regulator-name = "vreg 193 regulator-name = "vreg_l3b";
449 regulator-min-microvol 194 regulator-min-microvolt = <1200000>;
450 regulator-max-microvol 195 regulator-max-microvolt = <1200000>;
451 regulator-initial-mode 196 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
452 regulator-boot-on; 197 regulator-boot-on;
453 }; 198 };
454 199
455 vreg_l4b: ldo4 { 200 vreg_l4b: ldo4 {
456 regulator-name = "vreg 201 regulator-name = "vreg_l4b";
457 regulator-min-microvol 202 regulator-min-microvolt = <912000>;
458 regulator-max-microvol 203 regulator-max-microvolt = <912000>;
459 regulator-initial-mode 204 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
460 }; 205 };
461 206
462 vreg_l6b: ldo6 { 207 vreg_l6b: ldo6 {
463 regulator-name = "vreg 208 regulator-name = "vreg_l6b";
464 regulator-min-microvol 209 regulator-min-microvolt = <880000>;
465 regulator-max-microvol 210 regulator-max-microvolt = <880000>;
466 regulator-initial-mode 211 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
467 regulator-boot-on; 212 regulator-boot-on;
>> 213 regulator-always-on; /* FIXME: VDD_A_EDP_0_0P9 */
468 }; 214 };
469 }; 215 };
470 216
471 regulators-1 { !! 217 pmc8280c-rpmh-regulators {
472 compatible = "qcom,pm8350c-rpm 218 compatible = "qcom,pm8350c-rpmh-regulators";
473 qcom,pmic-id = "c"; 219 qcom,pmic-id = "c";
474 220
475 vdd-bob-supply = <&vreg_vph_pw <<
476 vdd-l1-l12-supply = <&vreg_s1c <<
477 vdd-l2-l8-supply = <&vreg_s1c> <<
478 vdd-l3-l4-l5-l7-l13-supply = < <<
479 vdd-l6-l9-l11-supply = <&vreg_ <<
480 vdd-l10-supply = <&vreg_s11b>; <<
481 <<
482 vreg_s1c: smps1 { <<
483 regulator-name = "vreg <<
484 regulator-min-microvol <<
485 regulator-max-microvol <<
486 regulator-initial-mode <<
487 regulator-always-on; <<
488 }; <<
489 <<
490 vreg_l1c: ldo1 { 221 vreg_l1c: ldo1 {
491 regulator-name = "vreg 222 regulator-name = "vreg_l1c";
492 regulator-min-microvol 223 regulator-min-microvolt = <1800000>;
493 regulator-max-microvol 224 regulator-max-microvolt = <1800000>;
494 regulator-initial-mode 225 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
495 }; 226 };
496 227
497 vreg_l8c: ldo8 { <<
498 regulator-name = "vreg <<
499 regulator-min-microvol <<
500 regulator-max-microvol <<
501 regulator-initial-mode <<
502 }; <<
503 <<
504 vreg_l12c: ldo12 { 228 vreg_l12c: ldo12 {
505 regulator-name = "vreg 229 regulator-name = "vreg_l12c";
506 regulator-min-microvol 230 regulator-min-microvolt = <1800000>;
507 regulator-max-microvol 231 regulator-max-microvolt = <1800000>;
508 regulator-initial-mode 232 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
509 }; 233 };
510 234
511 vreg_l13c: ldo13 { 235 vreg_l13c: ldo13 {
512 regulator-name = "vreg 236 regulator-name = "vreg_l13c";
513 regulator-min-microvol 237 regulator-min-microvolt = <3072000>;
514 regulator-max-microvol 238 regulator-max-microvolt = <3072000>;
515 regulator-initial-mode 239 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
516 }; 240 };
517 <<
518 vreg_bob: bob { <<
519 regulator-name = "vreg <<
520 regulator-min-microvol <<
521 regulator-max-microvol <<
522 regulator-initial-mode <<
523 regulator-always-on; <<
524 }; <<
525 }; 241 };
526 242
527 regulators-2 { !! 243 pmc8280-2-rpmh-regulators {
528 compatible = "qcom,pm8350-rpmh 244 compatible = "qcom,pm8350-rpmh-regulators";
529 qcom,pmic-id = "d"; 245 qcom,pmic-id = "d";
530 246
531 vdd-l1-l4-supply = <&vreg_s11b 247 vdd-l1-l4-supply = <&vreg_s11b>;
532 vdd-l2-l7-supply = <&vreg_bob> <<
533 vdd-l3-l5-supply = <&vreg_s11b <<
534 vdd-l6-l9-l10-supply = <&vreg_ <<
535 vdd-l8-supply = <&vreg_s12b>; <<
536 <<
537 vreg_l2d: ldo2 { <<
538 regulator-name = "vreg <<
539 regulator-min-microvol <<
540 regulator-max-microvol <<
541 regulator-initial-mode <<
542 }; <<
543 248
544 vreg_l3d: ldo3 { 249 vreg_l3d: ldo3 {
545 regulator-name = "vreg 250 regulator-name = "vreg_l3d";
546 regulator-min-microvol 251 regulator-min-microvolt = <1200000>;
547 regulator-max-microvol 252 regulator-max-microvolt = <1200000>;
548 regulator-initial-mode 253 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
549 }; 254 };
550 255
551 vreg_l4d: ldo4 { 256 vreg_l4d: ldo4 {
552 regulator-name = "vreg 257 regulator-name = "vreg_l4d";
553 regulator-min-microvol 258 regulator-min-microvolt = <1200000>;
554 regulator-max-microvol 259 regulator-max-microvolt = <1200000>;
555 regulator-initial-mode 260 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
556 }; 261 };
557 262
558 vreg_l6d: ldo6 { 263 vreg_l6d: ldo6 {
559 regulator-name = "vreg 264 regulator-name = "vreg_l6d";
560 regulator-min-microvol 265 regulator-min-microvolt = <880000>;
561 regulator-max-microvol 266 regulator-max-microvolt = <880000>;
562 regulator-initial-mode 267 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
563 }; 268 };
564 269
565 vreg_l7d: ldo7 { 270 vreg_l7d: ldo7 {
566 regulator-name = "vreg 271 regulator-name = "vreg_l7d";
567 regulator-min-microvol 272 regulator-min-microvolt = <3072000>;
568 regulator-max-microvol 273 regulator-max-microvolt = <3072000>;
569 regulator-initial-mode 274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
570 }; 275 };
571 276
572 vreg_l8d: ldo8 { <<
573 regulator-name = "vreg <<
574 regulator-min-microvol <<
575 regulator-max-microvol <<
576 regulator-initial-mode <<
577 }; <<
578 <<
579 vreg_l9d: ldo9 { 277 vreg_l9d: ldo9 {
580 regulator-name = "vreg 278 regulator-name = "vreg_l9d";
581 regulator-min-microvol 279 regulator-min-microvolt = <912000>;
582 regulator-max-microvol 280 regulator-max-microvolt = <912000>;
583 regulator-initial-mode 281 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
584 }; 282 };
585 <<
586 vreg_l10d: ldo10 { <<
587 regulator-name = "vreg <<
588 regulator-min-microvol <<
589 regulator-max-microvol <<
590 regulator-initial-mode <<
591 }; <<
592 }; <<
593 }; <<
594 <<
595 &camss { <<
596 vdda-phy-supply = <&vreg_l6d>; <<
597 vdda-pll-supply = <&vreg_l4d>; <<
598 <<
599 status = "okay"; <<
600 <<
601 ports { <<
602 port@0 { <<
603 csiphy0_lanes01_ep: en <<
604 reg = <0>; <<
605 clock-lanes = <<
606 data-lanes = < <<
607 remote-endpoin <<
608 }; <<
609 }; <<
610 }; <<
611 }; <<
612 <<
613 &cci2 { <<
614 status = "okay"; <<
615 }; <<
616 <<
617 &cci2_i2c1 { <<
618 camera@10 { <<
619 compatible = "ovti,ov5675"; <<
620 reg = <0x10>; <<
621 <<
622 reset-gpios = <&tlmm 15 GPIO_A <<
623 pinctrl-names = "default"; <<
624 pinctrl-0 = <&cam_rgb_default> <<
625 <<
626 clocks = <&camcc CAMCC_MCLK3_C <<
627 <<
628 orientation = <0>; /* Fro <<
629 <<
630 avdd-supply = <&vreg_l6q>; <<
631 dvdd-supply = <&vreg_l2q>; <<
632 dovdd-supply = <&vreg_l7q>; <<
633 <<
634 port { <<
635 ov5675_ep: endpoint { <<
636 clock-lanes = <<
637 data-lanes = < <<
638 link-frequenci <<
639 remote-endpoin <<
640 }; <<
641 }; <<
642 <<
643 }; <<
644 }; <<
645 <<
646 &dispcc0 { <<
647 status = "okay"; <<
648 }; <<
649 <<
650 &gpu { <<
651 status = "okay"; <<
652 <<
653 zap-shader { <<
654 memory-region = <&gpu_mem>; <<
655 firmware-name = "qcom/sc8280xp <<
656 }; <<
657 }; <<
658 <<
659 &mdss0 { <<
660 status = "okay"; <<
661 }; <<
662 <<
663 &mdss0_dp0 { <<
664 status = "okay"; <<
665 }; <<
666 <<
667 &mdss0_dp0_out { <<
668 data-lanes = <0 1>; <<
669 remote-endpoint = <&usb_0_qmpphy_dp_in <<
670 }; <<
671 <<
672 &mdss0_dp1 { <<
673 status = "okay"; <<
674 }; <<
675 <<
676 &mdss0_dp1_out { <<
677 data-lanes = <0 1>; <<
678 remote-endpoint = <&usb_1_qmpphy_dp_in <<
679 }; <<
680 <<
681 &mdss0_dp3 { <<
682 compatible = "qcom,sc8280xp-edp"; <<
683 /delete-property/ #sound-dai-cells; <<
684 <<
685 data-lanes = <0 1 2 3>; <<
686 <<
687 status = "okay"; <<
688 <<
689 aux-bus { <<
690 panel { <<
691 compatible = "edp-pane <<
692 <<
693 backlight = <&backligh <<
694 power-supply = <&vreg_ <<
695 <<
696 port { <<
697 edp_panel_in: <<
698 remote <<
699 }; <<
700 }; <<
701 }; <<
702 }; <<
703 <<
704 ports { <<
705 port@1 { <<
706 reg = <1>; <<
707 mdss0_dp3_out: endpoin <<
708 remote-endpoin <<
709 }; <<
710 }; <<
711 }; <<
712 }; <<
713 <<
714 &mdss0_dp3_phy { <<
715 compatible = "qcom,sc8280xp-edp-phy"; <<
716 vdda-phy-supply = <&vreg_l6b>; <<
717 vdda-pll-supply = <&vreg_l3b>; <<
718 <<
719 status = "okay"; <<
720 }; <<
721 <<
722 &i2c4 { <<
723 clock-frequency = <400000>; <<
724 <<
725 pinctrl-names = "default"; <<
726 pinctrl-0 = <&i2c4_default>; <<
727 <<
728 status = "okay"; <<
729 <<
730 touchscreen@10 { <<
731 compatible = "elan,ekth5015m", <<
732 reg = <0x10>; <<
733 <<
734 interrupts-extended = <&tlmm 1 <<
735 reset-gpios = <&tlmm 99 (GPIO_ <<
736 no-reset-on-power-off; <<
737 <<
738 vcc33-supply = <&vreg_misc_3p3 <<
739 vccio-supply = <&vreg_misc_3p3 <<
740 <<
741 pinctrl-names = "default"; <<
742 pinctrl-0 = <&ts0_default>; <<
743 }; <<
744 }; <<
745 <<
746 &i2c11 { <<
747 clock-frequency = <400000>; <<
748 <<
749 pinctrl-names = "default"; <<
750 pinctrl-0 = <&i2c11_default>; <<
751 <<
752 status = "okay"; <<
753 <<
754 pm8008: pmic@c { <<
755 compatible = "qcom,pm8008"; <<
756 reg = <0xc>; <<
757 <<
758 interrupts-extended = <&tlmm 4 <<
759 reset-gpios = <&tlmm 42 GPIO_A <<
760 <<
761 vdd-l1-l2-supply = <&vreg_s11b <<
762 vdd-l3-l4-supply = <&vreg_bob> <<
763 vdd-l5-supply = <&vreg_bob>; <<
764 vdd-l6-supply = <&vreg_bob>; <<
765 vdd-l7-supply = <&vreg_bob>; <<
766 <<
767 pinctrl-names = "default"; <<
768 pinctrl-0 = <&pm8008_default>; <<
769 <<
770 gpio-controller; <<
771 #gpio-cells = <2>; <<
772 gpio-ranges = <&pm8008 0 0 2>; <<
773 <<
774 interrupt-controller; <<
775 #interrupt-cells = <2>; <<
776 <<
777 #thermal-sensor-cells = <0>; <<
778 <<
779 regulators { <<
780 vreg_l1q: ldo1 { <<
781 regulator-name <<
782 regulator-min- <<
783 regulator-max- <<
784 }; <<
785 <<
786 vreg_l2q: ldo2 { <<
787 regulator-name <<
788 regulator-min- <<
789 regulator-max- <<
790 }; <<
791 <<
792 vreg_l3q: ldo3 { <<
793 regulator-name <<
794 regulator-min- <<
795 regulator-max- <<
796 }; <<
797 <<
798 vreg_l4q: ldo4 { <<
799 regulator-name <<
800 regulator-min- <<
801 regulator-max- <<
802 }; <<
803 <<
804 vreg_l5q: ldo5 { <<
805 regulator-name <<
806 regulator-min- <<
807 regulator-max- <<
808 }; <<
809 <<
810 vreg_l6q: ldo6 { <<
811 regulator-name <<
812 regulator-min- <<
813 regulator-max- <<
814 }; <<
815 <<
816 vreg_l7q: ldo7 { <<
817 regulator-name <<
818 regulator-min- <<
819 regulator-max- <<
820 }; <<
821 }; <<
822 }; <<
823 }; <<
824 <<
825 &i2c21 { <<
826 clock-frequency = <400000>; <<
827 <<
828 pinctrl-names = "default"; <<
829 pinctrl-0 = <&i2c21_default>, <&tpad_d <<
830 <<
831 status = "okay"; <<
832 <<
833 touchpad@15 { <<
834 compatible = "hid-over-i2c"; <<
835 reg = <0x15>; <<
836 <<
837 hid-descr-addr = <0x1>; <<
838 interrupts-extended = <&tlmm 1 <<
839 vdd-supply = <&vreg_misc_3p3>; <<
840 vddl-supply = <&vreg_s10b>; <<
841 <<
842 wakeup-source; <<
843 }; <<
844 <<
845 touchpad@2c { <<
846 compatible = "hid-over-i2c"; <<
847 reg = <0x2c>; <<
848 <<
849 hid-descr-addr = <0x20>; <<
850 interrupts-extended = <&tlmm 1 <<
851 vdd-supply = <&vreg_misc_3p3>; <<
852 vddl-supply = <&vreg_s10b>; <<
853 <<
854 wakeup-source; <<
855 }; <<
856 <<
857 keyboard@68 { <<
858 compatible = "hid-over-i2c"; <<
859 reg = <0x68>; <<
860 <<
861 hid-descr-addr = <0x1>; <<
862 interrupts-extended = <&tlmm 1 <<
863 vdd-supply = <&vreg_misc_3p3>; <<
864 vddl-supply = <&vreg_s10b>; <<
865 <<
866 pinctrl-names = "default"; <<
867 pinctrl-0 = <&kybd_default>; <<
868 <<
869 wakeup-source; <<
870 }; 283 };
871 }; 284 };
872 285
873 &pcie2a { 286 &pcie2a {
874 perst-gpios = <&tlmm 143 GPIO_ACTIVE_L 287 perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
875 wake-gpios = <&tlmm 145 GPIO_ACTIVE_LO 288 wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
876 289
877 vddpe-3v3-supply = <&vreg_nvme>; 290 vddpe-3v3-supply = <&vreg_nvme>;
878 291
879 pinctrl-names = "default"; 292 pinctrl-names = "default";
880 pinctrl-0 = <&pcie2a_default>; 293 pinctrl-0 = <&pcie2a_default>;
881 294
882 status = "okay"; 295 status = "okay";
883 }; 296 };
884 297
885 &pcie2a_phy { 298 &pcie2a_phy {
886 vdda-phy-supply = <&vreg_l6d>; 299 vdda-phy-supply = <&vreg_l6d>;
887 vdda-pll-supply = <&vreg_l4d>; 300 vdda-pll-supply = <&vreg_l4d>;
888 301
889 status = "okay"; 302 status = "okay";
890 }; 303 };
891 304
892 &pcie3a { 305 &pcie3a {
893 perst-gpios = <&tlmm 151 GPIO_ACTIVE_L 306 perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
894 wake-gpios = <&tlmm 148 GPIO_ACTIVE_LO 307 wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
895 308
896 vddpe-3v3-supply = <&vreg_wwan>; 309 vddpe-3v3-supply = <&vreg_wwan>;
897 310
898 pinctrl-names = "default"; 311 pinctrl-names = "default";
899 pinctrl-0 = <&pcie3a_default>; 312 pinctrl-0 = <&pcie3a_default>;
900 313
901 status = "okay"; 314 status = "okay";
902 }; 315 };
903 316
904 &pcie3a_phy { 317 &pcie3a_phy {
905 vdda-phy-supply = <&vreg_l6d>; 318 vdda-phy-supply = <&vreg_l6d>;
906 vdda-pll-supply = <&vreg_l4d>; 319 vdda-pll-supply = <&vreg_l4d>;
907 320
908 status = "okay"; 321 status = "okay";
909 }; 322 };
910 323
911 &pcie4 { 324 &pcie4 {
912 max-link-speed = <2>; <<
913 <<
914 perst-gpios = <&tlmm 141 GPIO_ACTIVE_L 325 perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
915 wake-gpios = <&tlmm 139 GPIO_ACTIVE_LO 326 wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
916 327
917 vddpe-3v3-supply = <&vreg_wlan>; 328 vddpe-3v3-supply = <&vreg_wlan>;
918 329
919 pinctrl-names = "default"; 330 pinctrl-names = "default";
920 pinctrl-0 = <&pcie4_default>; 331 pinctrl-0 = <&pcie4_default>;
921 332
922 status = "okay"; 333 status = "okay";
923 }; 334 };
924 335
925 &pcie4_port0 { <<
926 wifi@0 { <<
927 compatible = "pci17cb,1103"; <<
928 reg = <0x10000 0x0 0x0 0x0 0x0 <<
929 <<
930 qcom,ath11k-calibration-varian <<
931 }; <<
932 }; <<
933 <<
934 &pcie4_phy { 336 &pcie4_phy {
935 vdda-phy-supply = <&vreg_l6d>; 337 vdda-phy-supply = <&vreg_l6d>;
936 vdda-pll-supply = <&vreg_l4d>; 338 vdda-pll-supply = <&vreg_l4d>;
937 339
938 status = "okay"; 340 status = "okay";
939 }; 341 };
940 342
941 &pmc8280c_lpg { 343 &pmc8280c_lpg {
942 status = "okay"; 344 status = "okay";
943 }; 345 };
944 346
945 &pmk8280_adc_tm { 347 &pmk8280_adc_tm {
946 status = "okay"; 348 status = "okay";
947 349
948 sys-therm@0 { 350 sys-therm@0 {
949 reg = <0>; 351 reg = <0>;
950 io-channels = <&pmk8280_vadc P 352 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
951 qcom,hw-settle-time-us = <200> 353 qcom,hw-settle-time-us = <200>;
952 qcom,avg-samples = <2>; 354 qcom,avg-samples = <2>;
953 qcom,ratiometric; 355 qcom,ratiometric;
954 }; 356 };
955 357
956 sys-therm@1 { 358 sys-therm@1 {
957 reg = <1>; 359 reg = <1>;
958 io-channels = <&pmk8280_vadc P 360 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
959 qcom,hw-settle-time-us = <200> 361 qcom,hw-settle-time-us = <200>;
960 qcom,avg-samples = <2>; 362 qcom,avg-samples = <2>;
961 qcom,ratiometric; 363 qcom,ratiometric;
962 }; 364 };
963 365
964 sys-therm@2 { 366 sys-therm@2 {
965 reg = <2>; 367 reg = <2>;
966 io-channels = <&pmk8280_vadc P 368 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
967 qcom,hw-settle-time-us = <200> 369 qcom,hw-settle-time-us = <200>;
968 qcom,avg-samples = <2>; 370 qcom,avg-samples = <2>;
969 qcom,ratiometric; 371 qcom,ratiometric;
970 }; 372 };
971 373
972 sys-therm@3 { 374 sys-therm@3 {
973 reg = <3>; 375 reg = <3>;
974 io-channels = <&pmk8280_vadc P 376 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
975 qcom,hw-settle-time-us = <200> 377 qcom,hw-settle-time-us = <200>;
976 qcom,avg-samples = <2>; 378 qcom,avg-samples = <2>;
977 qcom,ratiometric; 379 qcom,ratiometric;
978 }; 380 };
979 381
980 sys-therm@4 { 382 sys-therm@4 {
981 reg = <4>; 383 reg = <4>;
982 io-channels = <&pmk8280_vadc P 384 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
983 qcom,hw-settle-time-us = <200> 385 qcom,hw-settle-time-us = <200>;
984 qcom,avg-samples = <2>; 386 qcom,avg-samples = <2>;
985 qcom,ratiometric; 387 qcom,ratiometric;
986 }; 388 };
987 389
988 sys-therm@5 { 390 sys-therm@5 {
989 reg = <5>; 391 reg = <5>;
990 io-channels = <&pmk8280_vadc P 392 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
991 qcom,hw-settle-time-us = <200> 393 qcom,hw-settle-time-us = <200>;
992 qcom,avg-samples = <2>; 394 qcom,avg-samples = <2>;
993 qcom,ratiometric; 395 qcom,ratiometric;
994 }; 396 };
995 397
996 sys-therm@6 { 398 sys-therm@6 {
997 reg = <6>; 399 reg = <6>;
998 io-channels = <&pmk8280_vadc P 400 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
999 qcom,hw-settle-time-us = <200> 401 qcom,hw-settle-time-us = <200>;
1000 qcom,avg-samples = <2>; 402 qcom,avg-samples = <2>;
1001 qcom,ratiometric; 403 qcom,ratiometric;
1002 }; 404 };
1003 405
1004 sys-therm@7 { 406 sys-therm@7 {
1005 reg = <7>; 407 reg = <7>;
1006 io-channels = <&pmk8280_vadc 408 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
1007 qcom,hw-settle-time-us = <200 409 qcom,hw-settle-time-us = <200>;
1008 qcom,avg-samples = <2>; 410 qcom,avg-samples = <2>;
1009 qcom,ratiometric; 411 qcom,ratiometric;
1010 }; 412 };
1011 }; 413 };
1012 414
1013 &pmk8280_pon_pwrkey { 415 &pmk8280_pon_pwrkey {
1014 status = "okay"; 416 status = "okay";
1015 }; 417 };
1016 418
1017 &pmk8280_pon_resin { 419 &pmk8280_pon_resin {
1018 status = "okay"; 420 status = "okay";
1019 }; 421 };
1020 422
1021 &pmk8280_rtc { !! 423 &pmk8280_vadc {
1022 nvmem-cells = <&rtc_offset>; <<
1023 nvmem-cell-names = "offset"; <<
1024 <<
1025 status = "okay"; 424 status = "okay";
1026 }; <<
1027 425
1028 &pmk8280_sdam_6 { !! 426 pmic-die-temp@3 {
1029 status = "okay"; !! 427 reg = <PMK8350_ADC7_DIE_TEMP>;
>> 428 qcom,pre-scaling = <1 1>;
>> 429 label = "pmk8350_die_temp";
>> 430 };
1030 431
1031 rtc_offset: rtc-offset@bc { !! 432 xo-therm@44 {
1032 reg = <0xbc 0x4>; !! 433 reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
>> 434 qcom,hw-settle-time = <200>;
>> 435 qcom,ratiometric;
>> 436 label = "pmk8350_xo_therm";
1033 }; 437 };
1034 }; <<
1035 438
1036 &pmk8280_vadc { !! 439 pmic-die-temp@103 {
1037 channel@144 { !! 440 reg = <PM8350_ADC7_DIE_TEMP(1)>;
>> 441 qcom,pre-scaling = <1 1>;
>> 442 label = "pmc8280_1_die_temp";
>> 443 };
>> 444
>> 445 sys-therm@144 {
1038 reg = <PM8350_ADC7_AMUX_THM1_ 446 reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
1039 qcom,hw-settle-time = <200>; 447 qcom,hw-settle-time = <200>;
1040 qcom,ratiometric; 448 qcom,ratiometric;
1041 label = "sys_therm1"; 449 label = "sys_therm1";
1042 }; 450 };
1043 451
1044 channel@145 { !! 452 sys-therm@145 {
1045 reg = <PM8350_ADC7_AMUX_THM2_ 453 reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
1046 qcom,hw-settle-time = <200>; 454 qcom,hw-settle-time = <200>;
1047 qcom,ratiometric; 455 qcom,ratiometric;
1048 label = "sys_therm2"; 456 label = "sys_therm2";
1049 }; 457 };
1050 458
1051 channel@146 { !! 459 sys-therm@146 {
1052 reg = <PM8350_ADC7_AMUX_THM3_ 460 reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
1053 qcom,hw-settle-time = <200>; 461 qcom,hw-settle-time = <200>;
1054 qcom,ratiometric; 462 qcom,ratiometric;
1055 label = "sys_therm3"; 463 label = "sys_therm3";
1056 }; 464 };
1057 465
1058 channel@147 { !! 466 sys-therm@147 {
1059 reg = <PM8350_ADC7_AMUX_THM4_ 467 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
1060 qcom,hw-settle-time = <200>; 468 qcom,hw-settle-time = <200>;
1061 qcom,ratiometric; 469 qcom,ratiometric;
1062 label = "sys_therm4"; 470 label = "sys_therm4";
1063 }; 471 };
1064 472
1065 channel@344 { !! 473 pmic-die-temp@303 {
>> 474 reg = <PM8350_ADC7_DIE_TEMP(3)>;
>> 475 qcom,pre-scaling = <1 1>;
>> 476 label = "pmc8280_2_die_temp";
>> 477 };
>> 478
>> 479 sys-therm@344 {
1066 reg = <PM8350_ADC7_AMUX_THM1_ 480 reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
1067 qcom,hw-settle-time = <200>; 481 qcom,hw-settle-time = <200>;
1068 qcom,ratiometric; 482 qcom,ratiometric;
1069 label = "sys_therm5"; 483 label = "sys_therm5";
1070 }; 484 };
1071 485
1072 channel@345 { !! 486 sys-therm@345 {
1073 reg = <PM8350_ADC7_AMUX_THM2_ 487 reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
1074 qcom,hw-settle-time = <200>; 488 qcom,hw-settle-time = <200>;
1075 qcom,ratiometric; 489 qcom,ratiometric;
1076 label = "sys_therm6"; 490 label = "sys_therm6";
1077 }; 491 };
1078 492
1079 channel@346 { !! 493 sys-therm@346 {
1080 reg = <PM8350_ADC7_AMUX_THM3_ 494 reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
1081 qcom,hw-settle-time = <200>; 495 qcom,hw-settle-time = <200>;
1082 qcom,ratiometric; 496 qcom,ratiometric;
1083 label = "sys_therm7"; 497 label = "sys_therm7";
1084 }; 498 };
1085 499
1086 channel@347 { !! 500 sys-therm@347 {
1087 reg = <PM8350_ADC7_AMUX_THM4_ 501 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
1088 qcom,hw-settle-time = <200>; 502 qcom,hw-settle-time = <200>;
1089 qcom,ratiometric; 503 qcom,ratiometric;
1090 label = "sys_therm8"; 504 label = "sys_therm8";
1091 }; 505 };
>> 506
>> 507 pmic-die-temp@403 {
>> 508 reg = <PMR735A_ADC7_DIE_TEMP>;
>> 509 qcom,pre-scaling = <1 1>;
>> 510 label = "pmr735a_die_temp";
>> 511 };
1092 }; 512 };
1093 513
1094 &qup0 { 514 &qup0 {
1095 status = "okay"; 515 status = "okay";
1096 }; 516 };
1097 517
1098 &qup1 { !! 518 &qup0_i2c4 {
1099 status = "okay"; !! 519 clock-frequency = <400000>;
1100 }; !! 520
>> 521 pinctrl-names = "default";
>> 522 pinctrl-0 = <&qup0_i2c4_default>;
1101 523
1102 &qup2 { <<
1103 status = "okay"; 524 status = "okay";
1104 }; <<
1105 525
1106 &remoteproc_adsp { !! 526 /* FIXME: verify */
1107 firmware-name = "qcom/sc8280xp/LENOVO !! 527 touchscreen@10 {
>> 528 compatible = "hid-over-i2c";
>> 529 reg = <0x10>;
1108 530
1109 status = "okay"; !! 531 hid-descr-addr = <0x1>;
1110 }; !! 532 interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
>> 533 vdd-supply = <&vreg_misc_3p3>;
1111 534
1112 &remoteproc_nsp0 { !! 535 pinctrl-names = "default";
1113 firmware-name = "qcom/sc8280xp/LENOVO !! 536 pinctrl-0 = <&ts0_default>;
>> 537 };
>> 538 };
1114 539
>> 540 &qup1 {
1115 status = "okay"; 541 status = "okay";
1116 }; 542 };
1117 543
1118 &rxmacro { !! 544 &qup2 {
1119 status = "okay"; 545 status = "okay";
1120 }; 546 };
1121 547
1122 &sound { !! 548 &qup2_i2c5 {
1123 compatible = "qcom,sc8280xp-sndcard"; !! 549 clock-frequency = <400000>;
1124 model = "SC8280XP-LENOVO-X13S"; <<
1125 audio-routing = <<
1126 "SpkrLeft IN", "WSA_SPK1 OUT" <<
1127 "SpkrRight IN", "WSA_SPK2 OUT <<
1128 "IN1_HPHL", "HPHL_OUT", <<
1129 "IN2_HPHR", "HPHR_OUT", <<
1130 "AMIC2", "MIC BIAS2", <<
1131 "VA DMIC0", "MIC BIAS1", <<
1132 "VA DMIC1", "MIC BIAS1", <<
1133 "VA DMIC2", "MIC BIAS3", <<
1134 "VA DMIC0", "VA MIC BIAS1", <<
1135 "VA DMIC1", "VA MIC BIAS1", <<
1136 "VA DMIC2", "VA MIC BIAS3", <<
1137 "TX SWR_ADC1", "ADC2_OUTPUT"; <<
1138 <<
1139 wcd-playback-dai-link { <<
1140 link-name = "WCD Playback"; <<
1141 cpu { <<
1142 sound-dai = <&q6apmbe <<
1143 }; <<
1144 <<
1145 codec { <<
1146 sound-dai = <&wcd938x <<
1147 }; <<
1148 550
1149 platform { !! 551 pinctrl-names = "default";
1150 sound-dai = <&q6apm>; !! 552 pinctrl-0 = <&qup2_i2c5_default>;
1151 }; <<
1152 }; <<
1153 553
1154 wcd-capture-dai-link { !! 554 status = "okay";
1155 link-name = "WCD Capture"; <<
1156 cpu { <<
1157 sound-dai = <&q6apmbe <<
1158 }; <<
1159 555
1160 codec { !! 556 touchpad@15 {
1161 sound-dai = <&wcd938x !! 557 compatible = "hid-over-i2c";
1162 }; !! 558 reg = <0x15>;
1163 559
1164 platform { !! 560 hid-descr-addr = <0x1>;
1165 sound-dai = <&q6apm>; !! 561 interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
1166 }; !! 562 vdd-supply = <&vreg_misc_3p3>;
1167 }; <<
1168 563
1169 wsa-dai-link { !! 564 pinctrl-names = "default";
1170 link-name = "WSA Playback"; !! 565 pinctrl-0 = <&tpad_default>;
1171 cpu { <<
1172 sound-dai = <&q6apmbe <<
1173 }; <<
1174 566
1175 codec { !! 567 wakeup-source;
1176 sound-dai = <&left_sp <<
1177 }; <<
1178 568
1179 platform { !! 569 status = "disabled";
1180 sound-dai = <&q6apm>; <<
1181 }; <<
1182 }; 570 };
1183 571
1184 va-dai-link { !! 572 touchpad@2c {
1185 link-name = "VA Capture"; !! 573 compatible = "hid-over-i2c";
1186 cpu { !! 574 reg = <0x2c>;
1187 sound-dai = <&q6apmbe <<
1188 }; <<
1189 <<
1190 platform { <<
1191 sound-dai = <&q6apm>; <<
1192 }; <<
1193 <<
1194 codec { <<
1195 sound-dai = <&vamacro <<
1196 }; <<
1197 }; <<
1198 }; <<
1199 575
1200 &swr0 { !! 576 hid-descr-addr = <0x20>;
1201 status = "okay"; !! 577 interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
>> 578 vdd-supply = <&vreg_misc_3p3>;
1202 579
1203 left_spkr: wsa8830-left@0,1 { <<
1204 compatible = "sdw10217020200" <<
1205 reg = <0 1>; <<
1206 pinctrl-names = "default"; 580 pinctrl-names = "default";
1207 pinctrl-0 = <&spkr_1_sd_n_def !! 581 pinctrl-0 = <&tpad_default>;
1208 powerdown-gpios = <&tlmm 178 <<
1209 #thermal-sensor-cells = <0>; <<
1210 sound-name-prefix = "SpkrLeft <<
1211 #sound-dai-cells = <0>; <<
1212 vdd-supply = <&vreg_s10b>; <<
1213 }; <<
1214 582
1215 right_spkr: wsa8830-right@0,2 { !! 583 wakeup-source;
1216 compatible = "sdw10217020200" <<
1217 reg = <0 2>; <<
1218 pinctrl-names = "default"; <<
1219 pinctrl-0 = <&spkr_2_sd_n_def <<
1220 powerdown-gpios = <&tlmm 179 <<
1221 #thermal-sensor-cells = <0>; <<
1222 sound-name-prefix = "SpkrRigh <<
1223 #sound-dai-cells = <0>; <<
1224 vdd-supply = <&vreg_s10b>; <<
1225 }; 584 };
1226 }; <<
1227 585
1228 &swr1 { !! 586 keyboard@68 {
1229 status = "okay"; !! 587 compatible = "hid-over-i2c";
>> 588 reg = <0x68>;
1230 589
1231 wcd_rx: wcd9380-rx@0,4 { !! 590 hid-descr-addr = <0x1>;
1232 compatible = "sdw20217010d00" !! 591 interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
1233 reg = <0 4>; !! 592 vdd-supply = <&vreg_misc_3p3>;
1234 qcom,rx-port-mapping = <1 2 3 <<
1235 }; <<
1236 }; <<
1237 593
1238 &swr2 { !! 594 pinctrl-names = "default";
1239 status = "okay"; !! 595 pinctrl-0 = <&kybd_default>;
1240 596
1241 wcd_tx: wcd9380-tx@0,3 { !! 597 wakeup-source;
1242 compatible = "sdw20217010d00" <<
1243 reg = <0 3>; <<
1244 qcom,tx-port-mapping = <1 1 2 <<
1245 }; 598 };
1246 }; 599 };
1247 600
1248 &txmacro { !! 601 &remoteproc_adsp {
>> 602 firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn";
>> 603
1249 status = "okay"; 604 status = "okay";
1250 }; 605 };
1251 606
1252 &uart2 { !! 607 &remoteproc_nsp0 {
1253 pinctrl-0 = <&uart2_default>; !! 608 firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn";
1254 pinctrl-names = "default"; <<
1255 609
1256 status = "okay"; 610 status = "okay";
1257 <<
1258 bluetooth { <<
1259 compatible = "qcom,wcn6855-bt <<
1260 <<
1261 vddio-supply = <&vreg_s10b>; <<
1262 vddbtcxmx-supply = <&vreg_s12 <<
1263 vddrfacmn-supply = <&vreg_s12 <<
1264 vddrfa0p8-supply = <&vreg_s12 <<
1265 vddrfa1p2-supply = <&vreg_s11 <<
1266 vddrfa1p7-supply = <&vreg_s1c <<
1267 <<
1268 max-speed = <3200000>; <<
1269 <<
1270 enable-gpios = <&tlmm 133 GPI <<
1271 swctrl-gpios = <&tlmm 132 GPI <<
1272 <<
1273 pinctrl-0 = <&bt_default>; <<
1274 pinctrl-names = "default"; <<
1275 }; <<
1276 }; 611 };
1277 612
1278 &usb_0 { 613 &usb_0 {
1279 status = "okay"; 614 status = "okay";
1280 }; 615 };
1281 616
1282 &usb_0_dwc3 { 617 &usb_0_dwc3 {
>> 618 /* TODO: Define USB-C connector properly */
1283 dr_mode = "host"; 619 dr_mode = "host";
1284 }; 620 };
1285 621
1286 &usb_0_dwc3_hs { <<
1287 remote-endpoint = <&pmic_glink_con0_h <<
1288 }; <<
1289 <<
1290 &usb_0_hsphy { 622 &usb_0_hsphy {
1291 vdda-pll-supply = <&vreg_l9d>; 623 vdda-pll-supply = <&vreg_l9d>;
1292 vdda18-supply = <&vreg_l1c>; 624 vdda18-supply = <&vreg_l1c>;
1293 vdda33-supply = <&vreg_l7d>; 625 vdda33-supply = <&vreg_l7d>;
1294 626
1295 status = "okay"; 627 status = "okay";
1296 }; 628 };
1297 629
1298 &usb_0_qmpphy { 630 &usb_0_qmpphy {
1299 vdda-phy-supply = <&vreg_l9d>; 631 vdda-phy-supply = <&vreg_l9d>;
1300 vdda-pll-supply = <&vreg_l4d>; 632 vdda-pll-supply = <&vreg_l4d>;
1301 633
1302 orientation-switch; <<
1303 <<
1304 status = "okay"; 634 status = "okay";
1305 }; 635 };
1306 636
1307 &usb_0_qmpphy_dp_in { <<
1308 remote-endpoint = <&mdss0_dp0_out>; <<
1309 }; <<
1310 <<
1311 &usb_0_qmpphy_out { <<
1312 remote-endpoint = <&pmic_glink_con0_s <<
1313 }; <<
1314 <<
1315 &usb_1 { 637 &usb_1 {
1316 status = "okay"; 638 status = "okay";
1317 }; 639 };
1318 640
1319 &usb_1_dwc3 { 641 &usb_1_dwc3 {
>> 642 /* TODO: Define USB-C connector properly */
1320 dr_mode = "host"; 643 dr_mode = "host";
1321 }; 644 };
1322 645
1323 &usb_1_dwc3_hs { <<
1324 remote-endpoint = <&pmic_glink_con1_h <<
1325 }; <<
1326 <<
1327 &usb_1_hsphy { 646 &usb_1_hsphy {
1328 vdda-pll-supply = <&vreg_l4b>; 647 vdda-pll-supply = <&vreg_l4b>;
1329 vdda18-supply = <&vreg_l1c>; 648 vdda18-supply = <&vreg_l1c>;
1330 vdda33-supply = <&vreg_l13c>; 649 vdda33-supply = <&vreg_l13c>;
1331 650
1332 status = "okay"; 651 status = "okay";
1333 }; 652 };
1334 653
1335 &usb_1_qmpphy { 654 &usb_1_qmpphy {
1336 vdda-phy-supply = <&vreg_l4b>; 655 vdda-phy-supply = <&vreg_l4b>;
1337 vdda-pll-supply = <&vreg_l3b>; 656 vdda-pll-supply = <&vreg_l3b>;
1338 657
1339 orientation-switch; <<
1340 <<
1341 status = "okay"; <<
1342 }; <<
1343 <<
1344 &usb_1_qmpphy_dp_in { <<
1345 remote-endpoint = <&mdss0_dp1_out>; <<
1346 }; <<
1347 <<
1348 &usb_1_qmpphy_out { <<
1349 remote-endpoint = <&pmic_glink_con1_s <<
1350 }; <<
1351 <<
1352 &usb_2 { <<
1353 status = "okay"; <<
1354 }; <<
1355 <<
1356 &usb_2_hsphy0 { <<
1357 vdda-pll-supply = <&vreg_l1b>; <<
1358 vdda18-supply = <&vreg_l1c>; <<
1359 vdda33-supply = <&vreg_l7d>; <<
1360 <<
1361 status = "okay"; <<
1362 }; <<
1363 <<
1364 &usb_2_hsphy1 { <<
1365 vdda-pll-supply = <&vreg_l8d>; <<
1366 vdda18-supply = <&vreg_l1c>; <<
1367 vdda33-supply = <&vreg_l7d>; <<
1368 <<
1369 status = "okay"; <<
1370 }; <<
1371 <<
1372 &usb_2_hsphy2 { <<
1373 vdda-pll-supply = <&vreg_l10d>; <<
1374 vdda18-supply = <&vreg_l8c>; <<
1375 vdda33-supply = <&vreg_l2d>; <<
1376 <<
1377 status = "okay"; <<
1378 }; <<
1379 <<
1380 &usb_2_hsphy3 { <<
1381 vdda-pll-supply = <&vreg_l10d>; <<
1382 vdda18-supply = <&vreg_l8c>; <<
1383 vdda33-supply = <&vreg_l2d>; <<
1384 <<
1385 status = "okay"; <<
1386 }; <<
1387 <<
1388 &usb_2_qmpphy0 { <<
1389 vdda-phy-supply = <&vreg_l1b>; <<
1390 vdda-pll-supply = <&vreg_l4d>; <<
1391 <<
1392 status = "okay"; <<
1393 }; <<
1394 <<
1395 &usb_2_qmpphy1 { <<
1396 vdda-phy-supply = <&vreg_l8d>; <<
1397 vdda-pll-supply = <&vreg_l4d>; <<
1398 <<
1399 status = "okay"; <<
1400 }; <<
1401 <<
1402 &vamacro { <<
1403 pinctrl-0 = <&dmic01_default>, <&dmic <<
1404 pinctrl-names = "default"; <<
1405 <<
1406 vdd-micb-supply = <&vreg_s10b>; <<
1407 <<
1408 qcom,dmic-sample-rate = <4800000>; <<
1409 <<
1410 status = "okay"; <<
1411 }; <<
1412 <<
1413 &wsamacro { <<
1414 status = "okay"; 658 status = "okay";
1415 }; 659 };
1416 660
1417 &xo_board_clk { 661 &xo_board_clk {
1418 clock-frequency = <38400000>; 662 clock-frequency = <38400000>;
1419 }; 663 };
1420 664
1421 /* PINCTRL */ 665 /* PINCTRL */
1422 666
1423 &lpass_tlmm { <<
1424 status = "okay"; <<
1425 }; <<
1426 <<
1427 &pmc8280_1_gpios { 667 &pmc8280_1_gpios {
1428 edp_bl_en: edp-bl-en-state { 668 edp_bl_en: edp-bl-en-state {
1429 pins = "gpio8"; 669 pins = "gpio8";
1430 function = "normal"; 670 function = "normal";
1431 }; 671 };
1432 672
1433 edp_bl_reg_en: edp-bl-reg-en-state { 673 edp_bl_reg_en: edp-bl-reg-en-state {
1434 pins = "gpio9"; 674 pins = "gpio9";
1435 function = "normal"; 675 function = "normal";
1436 }; 676 };
1437 677
1438 misc_3p3_reg_en: misc-3p3-reg-en-stat 678 misc_3p3_reg_en: misc-3p3-reg-en-state {
1439 pins = "gpio1"; 679 pins = "gpio1";
1440 function = "normal"; 680 function = "normal";
1441 }; 681 };
1442 }; 682 };
1443 683
1444 &pmc8280_2_gpios { 684 &pmc8280_2_gpios {
1445 wwan_sw_en: wwan-sw-en-state { 685 wwan_sw_en: wwan-sw-en-state {
1446 pins = "gpio1"; 686 pins = "gpio1";
1447 function = "normal"; 687 function = "normal";
1448 }; 688 };
1449 }; 689 };
1450 690
1451 &pmc8280c_gpios { 691 &pmc8280c_gpios {
1452 edp_bl_pwm: edp-bl-pwm-state { 692 edp_bl_pwm: edp-bl-pwm-state {
1453 pins = "gpio8"; 693 pins = "gpio8";
1454 function = "func1"; 694 function = "func1";
1455 }; 695 };
1456 }; 696 };
1457 697
1458 &pmr735a_gpios { 698 &pmr735a_gpios {
1459 hastings_reg_en: hastings-reg-en-stat 699 hastings_reg_en: hastings-reg-en-state {
1460 pins = "gpio1"; 700 pins = "gpio1";
1461 function = "normal"; 701 function = "normal";
1462 }; 702 };
1463 }; 703 };
1464 704
1465 &tlmm { 705 &tlmm {
1466 gpio-reserved-ranges = <70 2>, <74 6> !! 706 gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
1467 <<
1468 bt_default: bt-default-state { <<
1469 hstp-bt-en-pins { <<
1470 pins = "gpio133"; <<
1471 function = "gpio"; <<
1472 drive-strength = <16> <<
1473 bias-disable; <<
1474 }; <<
1475 <<
1476 hstp-sw-ctrl-pins { <<
1477 pins = "gpio132"; <<
1478 function = "gpio"; <<
1479 bias-pull-down; <<
1480 }; <<
1481 }; <<
1482 <<
1483 cam_indicator_en: cam-indicator-en-st <<
1484 pins = "gpio28"; <<
1485 function = "gpio"; <<
1486 drive-strength = <2>; <<
1487 bias-disable; <<
1488 }; <<
1489 <<
1490 cam_rgb_default: cam-rgb-default-stat <<
1491 mclk-pins { <<
1492 pins = "gpio17"; <<
1493 function = "cam_mclk" <<
1494 drive-strength = <16> <<
1495 bias-disable; <<
1496 }; <<
1497 <<
1498 sc-rgb-xshut-n-pins { <<
1499 pins = "gpio15"; <<
1500 function = "gpio"; <<
1501 drive-strength = <2>; <<
1502 bias-disable; <<
1503 }; <<
1504 }; <<
1505 <<
1506 edp_reg_en: edp-reg-en-state { <<
1507 pins = "gpio25"; <<
1508 function = "gpio"; <<
1509 drive-strength = <16>; <<
1510 bias-disable; <<
1511 }; <<
1512 707
1513 hall_int_n_default: hall-int-n-state 708 hall_int_n_default: hall-int-n-state {
1514 pins = "gpio107"; 709 pins = "gpio107";
1515 function = "gpio"; 710 function = "gpio";
1516 bias-disable; !! 711 input-enable;
1517 }; <<
1518 <<
1519 i2c4_default: i2c4-default-state { <<
1520 pins = "gpio171", "gpio172"; <<
1521 function = "qup4"; <<
1522 drive-strength = <16>; <<
1523 bias-disable; <<
1524 }; <<
1525 <<
1526 i2c11_default: i2c11-default-state { <<
1527 pins = "gpio18", "gpio19"; <<
1528 function = "qup11"; <<
1529 drive-strength = <16>; <<
1530 bias-disable; <<
1531 }; <<
1532 <<
1533 i2c21_default: i2c21-default-state { <<
1534 pins = "gpio81", "gpio82"; <<
1535 function = "qup21"; <<
1536 drive-strength = <16>; <<
1537 bias-disable; 712 bias-disable;
1538 }; 713 };
1539 714
1540 kybd_default: kybd-default-state { 715 kybd_default: kybd-default-state {
1541 disable-pins { 716 disable-pins {
1542 pins = "gpio102"; 717 pins = "gpio102";
1543 function = "gpio"; 718 function = "gpio";
1544 output-low; 719 output-low;
1545 }; 720 };
1546 721
1547 int-n-pins { 722 int-n-pins {
1548 pins = "gpio104"; 723 pins = "gpio104";
1549 function = "gpio"; 724 function = "gpio";
1550 bias-disable; 725 bias-disable;
1551 }; 726 };
1552 727
1553 reset-pins { 728 reset-pins {
1554 pins = "gpio105"; 729 pins = "gpio105";
1555 function = "gpio"; 730 function = "gpio";
1556 bias-disable; 731 bias-disable;
1557 }; 732 };
1558 }; 733 };
1559 734
1560 nvme_reg_en: nvme-reg-en-state { 735 nvme_reg_en: nvme-reg-en-state {
1561 pins = "gpio135"; 736 pins = "gpio135";
1562 function = "gpio"; 737 function = "gpio";
1563 drive-strength = <2>; 738 drive-strength = <2>;
1564 bias-disable; 739 bias-disable;
1565 }; 740 };
1566 741
1567 pcie2a_default: pcie2a-default-state 742 pcie2a_default: pcie2a-default-state {
1568 clkreq-n-pins { 743 clkreq-n-pins {
1569 pins = "gpio142"; 744 pins = "gpio142";
1570 function = "pcie2a_cl 745 function = "pcie2a_clkreq";
1571 drive-strength = <2>; 746 drive-strength = <2>;
1572 bias-pull-up; 747 bias-pull-up;
1573 }; 748 };
1574 749
1575 perst-n-pins { 750 perst-n-pins {
1576 pins = "gpio143"; 751 pins = "gpio143";
1577 function = "gpio"; 752 function = "gpio";
1578 drive-strength = <2>; 753 drive-strength = <2>;
1579 bias-disable; !! 754 bias-pull-down;
1580 }; 755 };
1581 756
1582 wake-n-pins { 757 wake-n-pins {
1583 pins = "gpio145"; !! 758 pins = "gpio145";
1584 function = "gpio"; !! 759 function = "gpio";
1585 drive-strength = <2>; !! 760 drive-strength = <2>;
1586 bias-pull-up; !! 761 bias-pull-up;
1587 }; !! 762 };
1588 }; 763 };
1589 764
1590 pcie3a_default: pcie3a-default-state 765 pcie3a_default: pcie3a-default-state {
1591 clkreq-n-pins { 766 clkreq-n-pins {
1592 pins = "gpio150"; 767 pins = "gpio150";
1593 function = "pcie3a_cl 768 function = "pcie3a_clkreq";
1594 drive-strength = <2>; 769 drive-strength = <2>;
1595 bias-pull-up; 770 bias-pull-up;
1596 }; 771 };
1597 772
1598 perst-n-pins { 773 perst-n-pins {
1599 pins = "gpio151"; 774 pins = "gpio151";
1600 function = "gpio"; 775 function = "gpio";
1601 drive-strength = <2>; 776 drive-strength = <2>;
1602 bias-disable; !! 777 bias-pull-down;
1603 }; 778 };
1604 779
1605 wake-n-pins { 780 wake-n-pins {
1606 pins = "gpio148"; 781 pins = "gpio148";
1607 function = "gpio"; 782 function = "gpio";
1608 drive-strength = <2>; 783 drive-strength = <2>;
1609 bias-pull-up; 784 bias-pull-up;
1610 }; 785 };
1611 }; 786 };
1612 787
1613 pcie4_default: pcie4-default-state { 788 pcie4_default: pcie4-default-state {
1614 clkreq-n-pins { 789 clkreq-n-pins {
1615 pins = "gpio140"; 790 pins = "gpio140";
1616 function = "pcie4_clk 791 function = "pcie4_clkreq";
1617 drive-strength = <2>; 792 drive-strength = <2>;
1618 bias-pull-up; 793 bias-pull-up;
1619 }; 794 };
1620 795
1621 perst-n-pins { 796 perst-n-pins {
1622 pins = "gpio141"; 797 pins = "gpio141";
1623 function = "gpio"; 798 function = "gpio";
1624 drive-strength = <2>; 799 drive-strength = <2>;
1625 bias-disable; !! 800 bias-pull-down;
1626 }; 801 };
1627 802
1628 wake-n-pins { 803 wake-n-pins {
1629 pins = "gpio139"; 804 pins = "gpio139";
1630 function = "gpio"; 805 function = "gpio";
1631 drive-strength = <2>; 806 drive-strength = <2>;
1632 bias-pull-up; 807 bias-pull-up;
1633 }; 808 };
1634 }; 809 };
1635 810
1636 pm8008_default: pm8008-default-state !! 811 qup0_i2c4_default: qup0-i2c4-default-state {
1637 int-pins { !! 812 pins = "gpio171", "gpio172";
1638 pins = "gpio41"; !! 813 function = "qup4";
1639 function = "gpio"; !! 814 bias-disable;
1640 drive-strength = <2>; !! 815 drive-strength = <16>;
1641 bias-pull-down; <<
1642 }; <<
1643 <<
1644 reset-n-pins { <<
1645 pins = "gpio42"; <<
1646 function = "gpio"; <<
1647 drive-strength = <2>; <<
1648 bias-disable; <<
1649 }; <<
1650 }; <<
1651 <<
1652 spkr_1_sd_n_default: spkr-1-sd-n-defa <<
1653 perst-n-pins { <<
1654 pins = "gpio178"; <<
1655 function = "gpio"; <<
1656 drive-strength = <16> <<
1657 bias-disable; <<
1658 output-high; <<
1659 }; <<
1660 }; 816 };
1661 817
1662 spkr_2_sd_n_default: spkr-2-sd-n-defa !! 818 qup2_i2c5_default: qup2-i2c5-default-state {
1663 perst-n-pins { !! 819 pins = "gpio81", "gpio82";
1664 pins = "gpio179"; !! 820 function = "qup21";
1665 function = "gpio"; !! 821 bias-disable;
1666 drive-strength = <16> !! 822 drive-strength = <16>;
1667 bias-disable; <<
1668 output-high; <<
1669 }; <<
1670 }; 823 };
1671 824
1672 tpad_default: tpad-default-state { 825 tpad_default: tpad-default-state {
1673 int-n-pins { 826 int-n-pins {
1674 pins = "gpio182"; 827 pins = "gpio182";
1675 function = "gpio"; 828 function = "gpio";
1676 bias-disable; 829 bias-disable;
1677 }; 830 };
1678 }; 831 };
1679 832
1680 ts0_default: ts0-default-state { 833 ts0_default: ts0-default-state {
1681 int-n-pins { 834 int-n-pins {
1682 pins = "gpio175"; 835 pins = "gpio175";
1683 function = "gpio"; 836 function = "gpio";
1684 bias-disable; 837 bias-disable;
1685 }; 838 };
1686 839
1687 reset-n-pins { 840 reset-n-pins {
1688 pins = "gpio99"; 841 pins = "gpio99";
1689 function = "gpio"; 842 function = "gpio";
1690 drive-strength = <2>; <<
1691 bias-disable; <<
1692 }; <<
1693 }; <<
1694 <<
1695 uart2_default: uart2-default-state { <<
1696 cts-pins { <<
1697 pins = "gpio121"; <<
1698 function = "qup2"; <<
1699 bias-bus-hold; <<
1700 }; <<
1701 <<
1702 rts-pins { <<
1703 pins = "gpio122"; <<
1704 function = "qup2"; <<
1705 drive-strength = <2>; <<
1706 bias-disable; <<
1707 }; <<
1708 <<
1709 rx-pins { <<
1710 pins = "gpio124"; <<
1711 function = "qup2"; <<
1712 bias-pull-up; <<
1713 }; <<
1714 <<
1715 tx-pins { <<
1716 pins = "gpio123"; <<
1717 function = "qup2"; <<
1718 drive-strength = <2>; <<
1719 bias-disable; <<
1720 }; <<
1721 }; <<
1722 <<
1723 usb0_sbu_default: usb0-sbu-state { <<
1724 oe-n-pins { <<
1725 pins = "gpio101"; <<
1726 function = "gpio"; <<
1727 bias-disable; <<
1728 drive-strength = <16> <<
1729 output-high; <<
1730 }; <<
1731 <<
1732 sel-pins { <<
1733 pins = "gpio164"; <<
1734 function = "gpio"; <<
1735 bias-disable; <<
1736 drive-strength = <16> <<
1737 }; <<
1738 }; <<
1739 <<
1740 usb1_sbu_default: usb1-sbu-state { <<
1741 oe-n-pins { <<
1742 pins = "gpio48"; <<
1743 function = "gpio"; <<
1744 bias-disable; <<
1745 drive-strength = <16> <<
1746 output-high; 843 output-high;
1747 }; <<
1748 <<
1749 sel-pins { <<
1750 pins = "gpio47"; <<
1751 function = "gpio"; <<
1752 bias-disable; <<
1753 drive-strength = <16> 844 drive-strength = <16>;
1754 }; <<
1755 }; <<
1756 <<
1757 wcd_default: wcd-default-state { <<
1758 reset-pins { <<
1759 pins = "gpio106"; <<
1760 function = "gpio"; <<
1761 bias-disable; <<
1762 }; 845 };
1763 }; 846 };
1764 }; 847 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.