1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (c) 2019, Linaro Ltd.
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h
10 #include <dt-bindings/regulator/qcom,rpmh-regu
11 #include <dt-bindings/sound/qcom,q6afe.h>
12 #include <dt-bindings/sound/qcom,q6asm.h>
13 #include "sdm845.dtsi"
14 #include "sdm845-wcd9340.dtsi"
15 #include "pm8998.dtsi"
16 #include "pmi8998.dtsi"
17
18 / {
19 model = "Thundercomm Dragonboard 845c"
20 compatible = "thundercomm,db845c", "qc
21 qcom,msm-id = <341 0x20001>;
22 qcom,board-id = <8 0>;
23
24 aliases {
25 serial0 = &uart9;
26 serial1 = &uart6;
27 };
28
29 chosen {
30 stdout-path = "serial0:115200n
31 };
32
33 /* Fixed crystal oscillator dedicated
34 clk40M: can-clock {
35 compatible = "fixed-clock";
36 #clock-cells = <0>;
37 clock-frequency = <40000000>;
38 };
39
40 dc12v: dc12v-regulator {
41 compatible = "regulator-fixed"
42 regulator-name = "DC12V";
43 regulator-min-microvolt = <120
44 regulator-max-microvolt = <120
45 regulator-always-on;
46 };
47
48 gpio-keys {
49 compatible = "gpio-keys";
50 autorepeat;
51
52 pinctrl-names = "default";
53 pinctrl-0 = <&vol_up_pin_a>;
54
55 key-vol-up {
56 label = "Volume Up";
57 linux,code = <KEY_VOLU
58 gpios = <&pm8998_gpios
59 };
60 };
61
62 leds {
63 compatible = "gpio-leds";
64
65 led-0 {
66 label = "green:user4";
67 function = LED_FUNCTIO
68 color = <LED_COLOR_ID_
69 gpios = <&pm8998_gpios
70 default-state = "off";
71 panic-indicator;
72 };
73
74 led-1 {
75 label = "yellow:wlan";
76 function = LED_FUNCTIO
77 color = <LED_COLOR_ID_
78 gpios = <&pm8998_gpios
79 linux,default-trigger
80 default-state = "off";
81 };
82
83 led-2 {
84 label = "blue:bt";
85 function = LED_FUNCTIO
86 color = <LED_COLOR_ID_
87 gpios = <&pm8998_gpios
88 linux,default-trigger
89 default-state = "off";
90 };
91 };
92
93 hdmi-out {
94 compatible = "hdmi-connector";
95 type = "a";
96
97 port {
98 hdmi_con: endpoint {
99 remote-endpoin
100 };
101 };
102 };
103
104 reserved-memory {
105 /* Cont splash region set up b
106 cont_splash_mem: framebuffer@9
107 reg = <0x0 0x9d400000
108 no-map;
109 };
110 };
111
112 lt9611_1v8: lt9611-vdd18-regulator {
113 compatible = "regulator-fixed"
114 regulator-name = "LT9611_1V8";
115
116 vin-supply = <&vdc_5v>;
117 regulator-min-microvolt = <180
118 regulator-max-microvolt = <180
119
120 gpio = <&tlmm 89 GPIO_ACTIVE_H
121 enable-active-high;
122 };
123
124 lt9611_3v3: lt9611-3v3 {
125 compatible = "regulator-fixed"
126 regulator-name = "LT9611_3V3";
127
128 vin-supply = <&vdc_3v3>;
129 regulator-min-microvolt = <330
130 regulator-max-microvolt = <330
131
132 /*
133 * TODO: make it possible to d
134 * gpio = <&tlmm 89 GPIO_ACTIV
135 * enable-active-high;
136 */
137 };
138
139 pcie0_1p05v: pcie-0-1p05v-regulator {
140 compatible = "regulator-fixed"
141 regulator-name = "PCIE0_1.05V"
142
143 vin-supply = <&vbat>;
144 regulator-min-microvolt = <105
145 regulator-max-microvolt = <105
146
147 /*
148 * TODO: make it possible to d
149 * gpio = <&tlmm 90 GPIO_ACTIV
150 * enable-active-high;
151 */
152 };
153
154 cam0_dvdd_1v2: cam0-dvdd-1v2-regulator
155 compatible = "regulator-fixed"
156 regulator-name = "CAM0_DVDD_1V
157 regulator-min-microvolt = <120
158 regulator-max-microvolt = <120
159 enable-active-high;
160 gpio = <&pm8998_gpios 12 GPIO_
161 pinctrl-names = "default";
162 pinctrl-0 = <&cam0_dvdd_1v2_en
163 vin-supply = <&vbat>;
164 };
165
166 cam0_avdd_2v8: cam0-avdd-2v8-regulator
167 compatible = "regulator-fixed"
168 regulator-name = "CAM0_AVDD_2V
169 regulator-min-microvolt = <280
170 regulator-max-microvolt = <280
171 enable-active-high;
172 gpio = <&pm8998_gpios 10 GPIO_
173 pinctrl-names = "default";
174 pinctrl-0 = <&cam0_avdd_2v8_en
175 vin-supply = <&vbat>;
176 };
177
178 /* This regulator is enabled when the
179 cam3_avdd_2v8: cam3-avdd-2v8-regulator
180 compatible = "regulator-fixed"
181 regulator-name = "CAM3_AVDD_2V
182 regulator-min-microvolt = <280
183 regulator-max-microvolt = <280
184 regulator-always-on;
185 vin-supply = <&vbat>;
186 };
187
188 pcie0_3p3v_dual: vldo-3v3-regulator {
189 compatible = "regulator-fixed"
190 regulator-name = "VLDO_3V3";
191
192 vin-supply = <&vbat>;
193 regulator-min-microvolt = <330
194 regulator-max-microvolt = <330
195
196 gpio = <&tlmm 90 GPIO_ACTIVE_H
197 enable-active-high;
198 /*
199 * FIXME: this regulator is re
200 * port. Keep it always on unt
201 * relationship.
202 */
203 regulator-always-on;
204
205 pinctrl-names = "default";
206 pinctrl-0 = <&pcie0_pwren_stat
207 };
208
209 v5p0_hdmiout: v5p0-hdmiout-regulator {
210 compatible = "regulator-fixed"
211 regulator-name = "V5P0_HDMIOUT
212
213 vin-supply = <&vdc_5v>;
214 regulator-min-microvolt = <500
215 regulator-max-microvolt = <500
216
217 /*
218 * TODO: make it possible to d
219 * gpio = <&tlmm 89 GPIO_ACTIV
220 * enable-active-high;
221 */
222 };
223
224 vbat: vbat-regulator {
225 compatible = "regulator-fixed"
226 regulator-name = "VBAT";
227
228 vin-supply = <&dc12v>;
229 regulator-min-microvolt = <420
230 regulator-max-microvolt = <420
231 regulator-always-on;
232 };
233
234 vbat_som: vbat-som-regulator {
235 compatible = "regulator-fixed"
236 regulator-name = "VBAT_SOM";
237
238 vin-supply = <&dc12v>;
239 regulator-min-microvolt = <420
240 regulator-max-microvolt = <420
241 regulator-always-on;
242 };
243
244 vdc_3v3: vdc-3v3-regulator {
245 compatible = "regulator-fixed"
246 regulator-name = "VDC_3V3";
247 vin-supply = <&dc12v>;
248 regulator-min-microvolt = <330
249 regulator-max-microvolt = <330
250 regulator-always-on;
251 };
252
253 vdc_5v: vdc-5v-regulator {
254 compatible = "regulator-fixed"
255 regulator-name = "VDC_5V";
256
257 vin-supply = <&dc12v>;
258 regulator-min-microvolt = <500
259 regulator-max-microvolt = <500
260 regulator-always-on;
261 };
262
263 vreg_s4a_1p8: vreg-s4a-1p8 {
264 compatible = "regulator-fixed"
265 regulator-name = "vreg_s4a_1p8
266
267 regulator-min-microvolt = <180
268 regulator-max-microvolt = <180
269 regulator-always-on;
270 };
271
272 vph_pwr: vph-pwr-regulator {
273 compatible = "regulator-fixed"
274 regulator-name = "vph_pwr";
275
276 vin-supply = <&vbat_som>;
277 };
278 };
279
280 &adsp_pas {
281 status = "okay";
282
283 firmware-name = "qcom/sdm845/adsp.mbn"
284 };
285
286 &apps_rsc {
287 regulators-0 {
288 compatible = "qcom,pm8998-rpmh
289 qcom,pmic-id = "a";
290 vdd-s1-supply = <&vph_pwr>;
291 vdd-s2-supply = <&vph_pwr>;
292 vdd-s3-supply = <&vph_pwr>;
293 vdd-s4-supply = <&vph_pwr>;
294 vdd-s5-supply = <&vph_pwr>;
295 vdd-s6-supply = <&vph_pwr>;
296 vdd-s7-supply = <&vph_pwr>;
297 vdd-s8-supply = <&vph_pwr>;
298 vdd-s9-supply = <&vph_pwr>;
299 vdd-s10-supply = <&vph_pwr>;
300 vdd-s11-supply = <&vph_pwr>;
301 vdd-s12-supply = <&vph_pwr>;
302 vdd-s13-supply = <&vph_pwr>;
303 vdd-l1-l27-supply = <&vreg_s7a
304 vdd-l2-l8-l17-supply = <&vreg_
305 vdd-l3-l11-supply = <&vreg_s7a
306 vdd-l4-l5-supply = <&vreg_s7a_
307 vdd-l6-supply = <&vph_pwr>;
308 vdd-l7-l12-l14-l15-supply = <&
309 vdd-l9-supply = <&vreg_bob>;
310 vdd-l10-l23-l25-supply = <&vre
311 vdd-l13-l19-l21-supply = <&vre
312 vdd-l16-l28-supply = <&vreg_bo
313 vdd-l18-l22-supply = <&vreg_bo
314 vdd-l20-l24-supply = <&vreg_bo
315 vdd-l26-supply = <&vreg_s3a_1p
316 vin-lvs-1-2-supply = <&vreg_s4
317
318 vreg_s3a_1p35: smps3 {
319 regulator-min-microvol
320 regulator-max-microvol
321 };
322
323 vreg_s5a_2p04: smps5 {
324 regulator-min-microvol
325 regulator-max-microvol
326 };
327
328 vreg_s7a_1p025: smps7 {
329 regulator-min-microvol
330 regulator-max-microvol
331 };
332
333 vreg_l1a_0p875: ldo1 {
334 regulator-min-microvol
335 regulator-max-microvol
336 regulator-initial-mode
337 };
338
339 vreg_l5a_0p8: ldo5 {
340 regulator-min-microvol
341 regulator-max-microvol
342 regulator-initial-mode
343 };
344
345 vreg_l12a_1p8: ldo12 {
346 regulator-min-microvol
347 regulator-max-microvol
348 regulator-initial-mode
349 };
350
351 vreg_l7a_1p8: ldo7 {
352 regulator-min-microvol
353 regulator-max-microvol
354 regulator-initial-mode
355 };
356
357 vreg_l13a_2p95: ldo13 {
358 regulator-min-microvol
359 regulator-max-microvol
360 regulator-initial-mode
361 };
362
363 vreg_l17a_1p3: ldo17 {
364 regulator-min-microvol
365 regulator-max-microvol
366 regulator-initial-mode
367 };
368
369 vreg_l20a_2p95: ldo20 {
370 regulator-min-microvol
371 regulator-max-microvol
372 regulator-initial-mode
373 };
374
375 vreg_l21a_2p95: ldo21 {
376 regulator-min-microvol
377 regulator-max-microvol
378 regulator-initial-mode
379 };
380
381 vreg_l24a_3p075: ldo24 {
382 regulator-min-microvol
383 regulator-max-microvol
384 regulator-initial-mode
385 };
386
387 vreg_l25a_3p3: ldo25 {
388 regulator-min-microvol
389 regulator-max-microvol
390 regulator-initial-mode
391 };
392
393 vreg_l26a_1p2: ldo26 {
394 regulator-min-microvol
395 regulator-max-microvol
396 regulator-initial-mode
397 };
398
399 vreg_lvs1a_1p8: lvs1 {
400 regulator-min-microvol
401 regulator-max-microvol
402 regulator-always-on;
403 };
404
405 vreg_lvs2a_1p8: lvs2 {
406 regulator-min-microvol
407 regulator-max-microvol
408 regulator-always-on;
409 };
410 };
411
412 regulators-1 {
413 compatible = "qcom,pmi8998-rpm
414 qcom,pmic-id = "b";
415
416 vdd-bob-supply = <&vph_pwr>;
417
418 vreg_bob: bob {
419 regulator-min-microvol
420 regulator-max-microvol
421 regulator-initial-mode
422 regulator-allow-bypass
423 };
424 };
425 };
426
427 &camss {
428 status = "okay";
429
430 vdda-phy-supply = <&vreg_l1a_0p875>;
431 vdda-pll-supply = <&vreg_l26a_1p2>;
432 };
433
434 &cdsp_pas {
435 status = "okay";
436 firmware-name = "qcom/sdm845/cdsp.mbn"
437 };
438
439 &gcc {
440 protected-clocks = <GCC_QSPI_CORE_CLK>
441 <GCC_QSPI_CORE_CLK_
442 <GCC_QSPI_CNOC_PERI
443 <GCC_LPASS_Q6_AXI_C
444 <GCC_LPASS_SWAY_CLK
445 };
446
447 &gmu {
448 status = "okay";
449 };
450
451 &gpi_dma0 {
452 status = "okay";
453 };
454
455 &gpi_dma1 {
456 status = "okay";
457 };
458
459 &gpu {
460 status = "okay";
461 zap-shader {
462 memory-region = <&gpu_mem>;
463 firmware-name = "qcom/sdm845/a
464 };
465 };
466
467 &i2c10 {
468 status = "okay";
469 clock-frequency = <400000>;
470
471 lt9611_codec: hdmi-bridge@3b {
472 compatible = "lontium,lt9611";
473 reg = <0x3b>;
474 #sound-dai-cells = <1>;
475
476 interrupts-extended = <&tlmm 8
477
478 reset-gpios = <&tlmm 128 GPIO_
479
480 vdd-supply = <<9611_1v8>;
481 vcc-supply = <<9611_3v3>;
482
483 pinctrl-names = "default";
484 pinctrl-0 = <<9611_irq_pin>,
485
486 ports {
487 #address-cells = <1>;
488 #size-cells = <0>;
489
490 port@0 {
491 reg = <0>;
492
493 lt9611_a: endp
494 remote
495 };
496 };
497
498 port@1 {
499 reg = <1>;
500
501 lt9611_b: endp
502 remote
503 };
504 };
505
506 port@2 {
507 reg = <2>;
508
509 lt9611_out: en
510 remote
511 };
512 };
513 };
514 };
515 };
516
517 &i2c11 {
518 /* On Low speed expansion */
519 clock-frequency = <100000>;
520 status = "okay";
521 };
522
523 &i2c14 {
524 /* On Low speed expansion */
525 clock-frequency = <100000>;
526 status = "okay";
527 };
528
529 &mdss {
530 memory-region = <&cont_splash_mem>;
531 status = "okay";
532 };
533
534 &mdss_dsi0 {
535 status = "okay";
536 vdda-supply = <&vreg_l26a_1p2>;
537
538 qcom,dual-dsi-mode;
539 qcom,master-dsi;
540
541 ports {
542 port@1 {
543 endpoint {
544 remote-endpoin
545 data-lanes = <
546 };
547 };
548 };
549 };
550
551 &mdss_dsi0_phy {
552 status = "okay";
553 vdds-supply = <&vreg_l1a_0p875>;
554 };
555
556 &mdss_dsi1 {
557 vdda-supply = <&vreg_l26a_1p2>;
558
559 qcom,dual-dsi-mode;
560
561 /* DSI1 is slave, so use DSI0 clocks *
562 assigned-clock-parents = <&mdss_dsi0_p
563
564 status = "okay";
565
566 ports {
567 port@1 {
568 endpoint {
569 remote-endpoin
570 data-lanes = <
571 };
572 };
573 };
574 };
575
576 &mdss_dsi1_phy {
577 vdds-supply = <&vreg_l1a_0p875>;
578 status = "okay";
579 };
580
581 &mss_pil {
582 status = "okay";
583 firmware-name = "qcom/sdm845/mba.mbn",
584 };
585
586 &pcie0 {
587 status = "okay";
588 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LO
589 wake-gpios = <&tlmm 134 GPIO_ACTIVE_HI
590
591 vddpe-3v3-supply = <&pcie0_3p3v_dual>;
592
593 pinctrl-names = "default";
594 pinctrl-0 = <&pcie0_default_state>;
595 };
596
597 &pcie0_phy {
598 status = "okay";
599
600 vdda-phy-supply = <&vreg_l1a_0p875>;
601 vdda-pll-supply = <&vreg_l26a_1p2>;
602 };
603
604 &pcie1 {
605 status = "okay";
606 perst-gpios = <&tlmm 102 GPIO_ACTIVE_L
607
608 pinctrl-names = "default";
609 pinctrl-0 = <&pcie1_default_state>;
610 };
611
612 &pcie1_phy {
613 status = "okay";
614
615 vdda-phy-supply = <&vreg_l1a_0p875>;
616 vdda-pll-supply = <&vreg_l26a_1p2>;
617 };
618
619 &pm8998_gpios {
620 gpio-line-names =
621 "NC",
622 "NC",
623 "WLAN_SW_CTRL",
624 "NC",
625 "PM_GPIO5_BLUE_BT_LED",
626 "VOL_UP_N",
627 "NC",
628 "ADC_IN1",
629 "PM_GPIO9_YEL_WIFI_LED",
630 "CAM0_AVDD_EN",
631 "NC",
632 "CAM0_DVDD_EN",
633 "PM_GPIO13_GREEN_U4_LED",
634 "DIV_CLK2",
635 "NC",
636 "NC",
637 "NC",
638 "SMB_STAT",
639 "NC",
640 "NC",
641 "ADC_IN2",
642 "OPTION1",
643 "WCSS_PWR_REQ",
644 "PM845_GPIO24",
645 "OPTION2",
646 "PM845_SLB";
647
648 cam0_dvdd_1v2_en_default: cam0-dvdd-1v
649 pins = "gpio12";
650 function = "normal";
651
652 bias-pull-up;
653 drive-push-pull;
654 qcom,drive-strength = <PMIC_GP
655 };
656
657 cam0_avdd_2v8_en_default: cam0-avdd-2v
658 pins = "gpio10";
659 function = "normal";
660
661 bias-pull-up;
662 drive-push-pull;
663 qcom,drive-strength = <PMIC_GP
664 };
665
666 vol_up_pin_a: vol-up-active-state {
667 pins = "gpio6";
668 function = "normal";
669 input-enable;
670 bias-pull-up;
671 qcom,drive-strength = <PMIC_GP
672 };
673 };
674
675 &pm8998_resin {
676 linux,code = <KEY_VOLUMEDOWN>;
677 status = "okay";
678 };
679
680 &pmi8998_lpg {
681 status = "okay";
682
683 qcom,power-source = <1>;
684
685 led@3 {
686 reg = <3>;
687 color = <LED_COLOR_ID_GREEN>;
688 function = LED_FUNCTION_HEARTB
689 function-enumerator = <3>;
690
691 linux,default-trigger = "heart
692 default-state = "on";
693 };
694
695 led@4 {
696 reg = <4>;
697 color = <LED_COLOR_ID_GREEN>;
698 function = LED_FUNCTION_INDICA
699 function-enumerator = <2>;
700 };
701
702 led@5 {
703 reg = <5>;
704 color = <LED_COLOR_ID_GREEN>;
705 function = LED_FUNCTION_INDICA
706 function-enumerator = <1>;
707 };
708 };
709
710 /* QUAT I2S Uses 4 I2S SD Lines for audio on L
711 &q6afedai {
712 dai@22 {
713 reg = <QUATERNARY_MI2S_RX>;
714 qcom,sd-lines = <0 1 2 3>;
715 };
716 };
717
718 &q6asmdai {
719 dai@0 {
720 reg = <0>;
721 };
722
723 dai@1 {
724 reg = <1>;
725 };
726
727 dai@2 {
728 reg = <2>;
729 };
730
731 dai@3 {
732 reg = <3>;
733 direction = <2>;
734 is-compress-dai;
735 };
736 };
737
738 &qupv3_id_0 {
739 status = "okay";
740 };
741
742 &qupv3_id_1 {
743 status = "okay";
744 };
745
746 &sdhc_2 {
747 status = "okay";
748
749 pinctrl-names = "default";
750 pinctrl-0 = <&sdc2_default_state &sdc2
751
752 vmmc-supply = <&vreg_l21a_2p95>;
753 vqmmc-supply = <&vreg_l13a_2p95>;
754
755 bus-width = <4>;
756 cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>
757 };
758
759 &sound {
760 compatible = "qcom,db845c-sndcard", "q
761 pinctrl-0 = <&quat_mi2s_active
762 &quat_mi2s_sd0_active
763 &quat_mi2s_sd1_active
764 &quat_mi2s_sd2_active
765 &quat_mi2s_sd3_active
766 pinctrl-names = "default";
767 model = "DB845c";
768 audio-routing =
769 "RX_BIAS", "MCLK",
770 "AMIC1", "MIC BIAS1",
771 "AMIC2", "MIC BIAS2",
772 "DMIC0", "MIC BIAS1",
773 "DMIC1", "MIC BIAS1",
774 "DMIC2", "MIC BIAS3",
775 "DMIC3", "MIC BIAS3",
776 "SpkrLeft IN", "SPK1 OUT",
777 "SpkrRight IN", "SPK2 OUT",
778 "MM_DL1", "MultiMedia1 Playba
779 "MM_DL2", "MultiMedia2 Playba
780 "MM_DL4", "MultiMedia4 Playba
781 "MultiMedia3 Capture", "MM_UL3
782
783 mm1-dai-link {
784 link-name = "MultiMedia1";
785 cpu {
786 sound-dai = <&q6asmdai
787 };
788 };
789
790 mm2-dai-link {
791 link-name = "MultiMedia2";
792 cpu {
793 sound-dai = <&q6asmdai
794 };
795 };
796
797 mm3-dai-link {
798 link-name = "MultiMedia3";
799 cpu {
800 sound-dai = <&q6asmdai
801 };
802 };
803
804 mm4-dai-link {
805 link-name = "MultiMedia4";
806 cpu {
807 sound-dai = <&q6asmdai
808 };
809 };
810
811 hdmi-dai-link {
812 link-name = "HDMI Playback";
813 cpu {
814 sound-dai = <&q6afedai
815 };
816
817 platform {
818 sound-dai = <&q6routin
819 };
820
821 codec {
822 sound-dai = <<9611_c
823 };
824 };
825
826 slim-dai-link {
827 link-name = "SLIM Playback";
828 cpu {
829 sound-dai = <&q6afedai
830 };
831
832 platform {
833 sound-dai = <&q6routin
834 };
835
836 codec {
837 sound-dai = <&left_spk
838 };
839 };
840
841 slimcap-dai-link {
842 link-name = "SLIM Capture";
843 cpu {
844 sound-dai = <&q6afedai
845 };
846
847 platform {
848 sound-dai = <&q6routin
849 };
850
851 codec {
852 sound-dai = <&wcd9340
853 };
854 };
855 };
856
857 &spi0 {
858 status = "okay";
859 pinctrl-names = "default";
860 pinctrl-0 = <&qup_spi0_default>;
861 cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
862
863 can@0 {
864 compatible = "microchip,mcp251
865 reg = <0>;
866 clocks = <&clk40M>;
867 interrupts-extended = <&tlmm 1
868 spi-max-frequency = <10000000>
869 vdd-supply = <&vdc_5v>;
870 xceiver-supply = <&vdc_5v>;
871 };
872 };
873
874 &spi2 {
875 /* On Low speed expansion */
876 status = "okay";
877 };
878
879 &tlmm {
880 cam0_default: cam0-default-state {
881 rst-pins {
882 pins = "gpio9";
883 function = "gpio";
884
885 drive-strength = <16>;
886 bias-disable;
887 };
888
889 mclk0-pins {
890 pins = "gpio13";
891 function = "cam_mclk";
892
893 drive-strength = <16>;
894 bias-disable;
895 };
896 };
897
898 cam3_default: cam3-default-state {
899 rst-pins {
900 function = "gpio";
901 pins = "gpio21";
902
903 drive-strength = <16>;
904 bias-disable;
905 };
906
907 mclk3-pins {
908 function = "cam_mclk";
909 pins = "gpio16";
910
911 drive-strength = <16>;
912 bias-disable;
913 };
914 };
915
916 dsi_sw_sel: dsi-sw-sel-state {
917 pins = "gpio120";
918 function = "gpio";
919
920 drive-strength = <2>;
921 bias-disable;
922 output-high;
923 };
924
925 lt9611_irq_pin: lt9611-irq-state {
926 pins = "gpio84";
927 function = "gpio";
928 bias-disable;
929 };
930
931 pcie0_default_state: pcie0-default-sta
932 clkreq-pins {
933 pins = "gpio36";
934 function = "pci_e0";
935 bias-pull-up;
936 };
937
938 reset-n-pins {
939 pins = "gpio35";
940 function = "gpio";
941
942 drive-strength = <2>;
943 output-low;
944 bias-pull-down;
945 };
946
947 wake-n-pins {
948 pins = "gpio37";
949 function = "gpio";
950
951 drive-strength = <2>;
952 bias-pull-up;
953 };
954 };
955
956 pcie0_pwren_state: pcie0-pwren-state {
957 pins = "gpio90";
958 function = "gpio";
959
960 drive-strength = <2>;
961 bias-disable;
962 };
963
964 pcie1_default_state: pcie1-default-sta
965 perst-n-pins {
966 pins = "gpio102";
967 function = "gpio";
968
969 drive-strength = <16>;
970 bias-disable;
971 };
972
973 clkreq-pins {
974 pins = "gpio103";
975 function = "pci_e1";
976 bias-pull-up;
977 };
978
979 wake-n-pins {
980 pins = "gpio11";
981 function = "gpio";
982
983 drive-strength = <2>;
984 bias-pull-up;
985 };
986
987 reset-n-pins {
988 pins = "gpio75";
989 function = "gpio";
990
991 drive-strength = <16>;
992 bias-pull-up;
993 output-high;
994 };
995 };
996
997 sdc2_default_state: sdc2-default-state
998 clk-pins {
999 pins = "sdc2_clk";
1000 bias-disable;
1001
1002 /*
1003 * It seems that mmc_
1004 * strength is not 16
1005 */
1006 drive-strength = <16>
1007 };
1008
1009 cmd-pins {
1010 pins = "sdc2_cmd";
1011 bias-pull-up;
1012 drive-strength = <10>
1013 };
1014
1015 data-pins {
1016 pins = "sdc2_data";
1017 bias-pull-up;
1018 drive-strength = <10>
1019 };
1020 };
1021
1022 sdc2_card_det_n: sd-card-det-n-state
1023 pins = "gpio126";
1024 function = "gpio";
1025 bias-pull-up;
1026 };
1027 };
1028
1029 &uart3 {
1030 label = "LS-UART0";
1031 pinctrl-0 = <&qup_uart3_4pin>;
1032
1033 status = "disabled";
1034 };
1035
1036 &uart6 {
1037 status = "okay";
1038
1039 pinctrl-0 = <&qup_uart6_4pin>;
1040
1041 bluetooth {
1042 compatible = "qcom,wcn3990-bt
1043
1044 vddio-supply = <&vreg_s4a_1p8
1045 vddxo-supply = <&vreg_l7a_1p8
1046 vddrf-supply = <&vreg_l17a_1p
1047 vddch0-supply = <&vreg_l25a_3
1048 max-speed = <3200000>;
1049 };
1050 };
1051
1052 &uart9 {
1053 label = "LS-UART1";
1054 status = "okay";
1055 };
1056
1057 &usb_1 {
1058 status = "okay";
1059 };
1060
1061 &usb_1_dwc3 {
1062 dr_mode = "peripheral";
1063 };
1064
1065 &usb_1_hsphy {
1066 status = "okay";
1067
1068 vdd-supply = <&vreg_l1a_0p875>;
1069 vdda-pll-supply = <&vreg_l12a_1p8>;
1070 vdda-phy-dpdm-supply = <&vreg_l24a_3p
1071
1072 qcom,imp-res-offset-value = <8>;
1073 qcom,hstx-trim-value = <QUSB2_V2_HSTX
1074 qcom,preemphasis-level = <QUSB2_V2_PR
1075 qcom,preemphasis-width = <QUSB2_V2_PR
1076 };
1077
1078 &usb_1_qmpphy {
1079 status = "okay";
1080
1081 vdda-phy-supply = <&vreg_l26a_1p2>;
1082 vdda-pll-supply = <&vreg_l1a_0p875>;
1083 };
1084
1085 &usb_2 {
1086 status = "okay";
1087 };
1088
1089 &usb_2_dwc3 {
1090 dr_mode = "host";
1091 };
1092
1093 &usb_2_hsphy {
1094 status = "okay";
1095
1096 vdd-supply = <&vreg_l1a_0p875>;
1097 vdda-pll-supply = <&vreg_l12a_1p8>;
1098 vdda-phy-dpdm-supply = <&vreg_l24a_3p
1099
1100 qcom,imp-res-offset-value = <8>;
1101 qcom,hstx-trim-value = <QUSB2_V2_HSTX
1102 };
1103
1104 &usb_2_qmpphy {
1105 status = "okay";
1106
1107 vdda-phy-supply = <&vreg_l26a_1p2>;
1108 vdda-pll-supply = <&vreg_l1a_0p875>;
1109 };
1110
1111 &ufs_mem_hc {
1112 status = "okay";
1113
1114 reset-gpios = <&tlmm 150 GPIO_ACTIVE_
1115
1116 vcc-supply = <&vreg_l20a_2p95>;
1117 vcc-max-microamp = <800000>;
1118 };
1119
1120 &ufs_mem_phy {
1121 status = "okay";
1122
1123 vdda-phy-supply = <&vreg_l1a_0p875>;
1124 vdda-pll-supply = <&vreg_l26a_1p2>;
1125 };
1126
1127 &venus {
1128 status = "okay";
1129 };
1130
1131 &wcd9340 {
1132 reset-gpios = <&tlmm 64 GPIO_ACTIVE_H
1133 vdd-buck-supply = <&vreg_s4a_1p8>;
1134 vdd-buck-sido-supply = <&vreg_s4a_1p8
1135 vdd-tx-supply = <&vreg_s4a_1p8>;
1136 vdd-rx-supply = <&vreg_s4a_1p8>;
1137 vdd-io-supply = <&vreg_s4a_1p8>;
1138
1139 swm: soundwire@c85 {
1140 left_spkr: speaker@0,1 {
1141 compatible = "sdw1021
1142 reg = <0 1>;
1143 powerdown-gpios = <&w
1144 #thermal-sensor-cells
1145 sound-name-prefix = "
1146 #sound-dai-cells = <0
1147 };
1148
1149 right_spkr: speaker@0,2 {
1150 compatible = "sdw1021
1151 powerdown-gpios = <&w
1152 reg = <0 2>;
1153 #thermal-sensor-cells
1154 sound-name-prefix = "
1155 #sound-dai-cells = <0
1156 };
1157 };
1158 };
1159
1160 &wifi {
1161 status = "okay";
1162
1163 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8
1164 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
1165 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>
1166 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>
1167
1168 qcom,snoc-host-cap-8bit-quirk;
1169 qcom,ath10k-calibration-variant = "Th
1170 };
1171
1172 /* PINCTRL - additions to nodes defined in sd
1173 &qup_spi2_default {
1174 drive-strength = <16>;
1175 };
1176
1177 &qup_i2c10_default {
1178 drive-strength = <2>;
1179 bias-disable;
1180 };
1181
1182 &qup_uart9_rx {
1183 drive-strength = <2>;
1184 bias-pull-up;
1185 };
1186
1187 &qup_uart9_tx {
1188 drive-strength = <2>;
1189 bias-disable;
1190 };
1191
1192 /* PINCTRL - additions to nodes defined in sd
1193 &qup_spi0_default {
1194 drive-strength = <6>;
1195 bias-disable;
1196 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.