1 // SPDX-License-Identifier: GPL-2.0 1 // SPDX-License-Identifier: GPL-2.0
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include <dt-bindings/leds/common.h> 5 #include <dt-bindings/leds/common.h>
6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
7 #include <dt-bindings/regulator/qcom,rpmh-regu 7 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
8 #include <dt-bindings/sound/qcom,q6afe.h> 8 #include <dt-bindings/sound/qcom,q6afe.h>
9 #include <dt-bindings/sound/qcom,q6asm.h> 9 #include <dt-bindings/sound/qcom,q6asm.h>
10 #include "sdm845.dtsi" 10 #include "sdm845.dtsi"
11 #include "sdm845-wcd9340.dtsi" 11 #include "sdm845-wcd9340.dtsi"
12 #include "pm8998.dtsi" 12 #include "pm8998.dtsi"
13 #include "pmi8998.dtsi" 13 #include "pmi8998.dtsi"
14 14
15 /* 15 /*
16 * Delete following upstream (sdm845.dtsi) res 16 * Delete following upstream (sdm845.dtsi) reserved
17 * memory mappings which are different in this 17 * memory mappings which are different in this device.
18 */ 18 */
19 /delete-node/ &tz_mem; 19 /delete-node/ &tz_mem;
20 /delete-node/ &adsp_mem; 20 /delete-node/ &adsp_mem;
21 /delete-node/ &wlan_msa_mem; 21 /delete-node/ &wlan_msa_mem;
22 /delete-node/ &mpss_region; 22 /delete-node/ &mpss_region;
23 /delete-node/ &venus_mem; 23 /delete-node/ &venus_mem;
24 /delete-node/ &cdsp_mem; 24 /delete-node/ &cdsp_mem;
25 /delete-node/ &mba_region; 25 /delete-node/ &mba_region;
26 /delete-node/ &slpi_mem; 26 /delete-node/ &slpi_mem;
27 /delete-node/ &spss_mem; 27 /delete-node/ &spss_mem;
28 /delete-node/ &rmtfs_mem; 28 /delete-node/ &rmtfs_mem;
29 29
30 / { 30 / {
31 chassis-type = "handset"; 31 chassis-type = "handset";
32 32
33 /* required for bootloader to select c 33 /* required for bootloader to select correct board */
34 qcom,board-id = <69 0>; 34 qcom,board-id = <69 0>;
35 qcom,msm-id = <321 0x20001>; 35 qcom,msm-id = <321 0x20001>;
36 36
37 aliases { 37 aliases {
38 serial1 = &uart6; 38 serial1 = &uart6;
39 }; 39 };
40 40
41 gpio-keys { 41 gpio-keys {
42 compatible = "gpio-keys"; 42 compatible = "gpio-keys";
43 autorepeat; 43 autorepeat;
44 44
45 pinctrl-names = "default"; 45 pinctrl-names = "default";
46 pinctrl-0 = <&vol_up_pin_a>; 46 pinctrl-0 = <&vol_up_pin_a>;
47 47
48 key-vol-up { 48 key-vol-up {
49 label = "Volume Up"; 49 label = "Volume Up";
50 linux,code = <KEY_VOLU 50 linux,code = <KEY_VOLUMEUP>;
51 gpios = <&pm8998_gpios 51 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
52 }; 52 };
53 }; 53 };
54 54
55 /* Reserved memory changes from downst 55 /* Reserved memory changes from downstream */
56 reserved-memory { 56 reserved-memory {
57 tz_mem: memory@86200000 { 57 tz_mem: memory@86200000 {
58 reg = <0 0x86200000 0 58 reg = <0 0x86200000 0 0x4900000>;
59 no-map; 59 no-map;
60 }; 60 };
61 61
62 adsp_mem: memory@8c500000 { 62 adsp_mem: memory@8c500000 {
63 reg = <0 0x8c500000 0 63 reg = <0 0x8c500000 0 0x1e00000>;
64 no-map; 64 no-map;
65 }; 65 };
66 66
67 wlan_msa_mem: memory@8e300000 67 wlan_msa_mem: memory@8e300000 {
68 reg = <0 0x8e300000 0 68 reg = <0 0x8e300000 0 0x100000>;
69 no-map; 69 no-map;
70 }; 70 };
71 71
72 mpss_region: memory@8e400000 { 72 mpss_region: memory@8e400000 {
73 reg = <0 0x8e400000 0 73 reg = <0 0x8e400000 0 0x7800000>;
74 no-map; 74 no-map;
75 }; 75 };
76 76
77 venus_mem: memory@95c00000 { 77 venus_mem: memory@95c00000 {
78 reg = <0 0x95c00000 0 78 reg = <0 0x95c00000 0 0x500000>;
79 no-map; 79 no-map;
80 }; 80 };
81 81
82 cdsp_mem: memory@96100000 { 82 cdsp_mem: memory@96100000 {
83 reg = <0 0x96100000 0 83 reg = <0 0x96100000 0 0x800000>;
84 no-map; 84 no-map;
85 }; 85 };
86 86
87 mba_region: memory@96900000 { 87 mba_region: memory@96900000 {
88 reg = <0 0x96900000 0 88 reg = <0 0x96900000 0 0x200000>;
89 no-map; 89 no-map;
90 }; 90 };
91 91
92 slpi_mem: memory@96b00000 { 92 slpi_mem: memory@96b00000 {
93 reg = <0 0x96b00000 0 93 reg = <0 0x96b00000 0 0x1400000>;
94 no-map; 94 no-map;
95 }; 95 };
96 96
97 spss_mem: memory@97f00000 { 97 spss_mem: memory@97f00000 {
98 reg = <0 0x97f00000 0 98 reg = <0 0x97f00000 0 0x100000>;
99 no-map; 99 no-map;
100 }; 100 };
101 101
102 /* Cont splash region set up b 102 /* Cont splash region set up by the bootloader */
103 cont_splash_mem: framebuffer@9 103 cont_splash_mem: framebuffer@9d400000 {
104 reg = <0 0x9d400000 0 104 reg = <0 0x9d400000 0 0x2400000>;
105 no-map; 105 no-map;
106 }; 106 };
107 107
108 rmtfs_mem: memory@f6301000 { 108 rmtfs_mem: memory@f6301000 {
109 compatible = "qcom,rmt 109 compatible = "qcom,rmtfs-mem";
110 reg = <0 0xf6301000 0 110 reg = <0 0xf6301000 0 0x200000>;
111 no-map; 111 no-map;
112 112
113 qcom,client-id = <1>; 113 qcom,client-id = <1>;
114 qcom,vmid = <QCOM_SCM_ !! 114 qcom,vmid = <15>;
115 }; 115 };
116 }; 116 };
117 117
118 battery: battery { 118 battery: battery {
119 compatible = "simple-battery"; 119 compatible = "simple-battery";
120 120
121 charge-full-design-microamp-ho 121 charge-full-design-microamp-hours = <4000000>;
122 voltage-min-design-microvolt = 122 voltage-min-design-microvolt = <3400000>;
123 voltage-max-design-microvolt = 123 voltage-max-design-microvolt = <4400000>;
124 }; 124 };
125 125
126 vreg_s4a_1p8: vreg-s4a-1p8 { 126 vreg_s4a_1p8: vreg-s4a-1p8 {
127 compatible = "regulator-fixed" 127 compatible = "regulator-fixed";
128 regulator-name = "vreg_s4a_1p8 128 regulator-name = "vreg_s4a_1p8";
129 129
130 regulator-min-microvolt = <180 130 regulator-min-microvolt = <1800000>;
131 regulator-max-microvolt = <180 131 regulator-max-microvolt = <1800000>;
132 regulator-always-on; 132 regulator-always-on;
133 }; 133 };
134 }; 134 };
135 135
136 &adsp_pas { 136 &adsp_pas {
137 status = "okay"; 137 status = "okay";
138 firmware-name = "qcom/sdm845/beryllium 138 firmware-name = "qcom/sdm845/beryllium/adsp.mbn";
139 }; 139 };
140 140
141 &apps_rsc { 141 &apps_rsc {
142 regulators-0 { 142 regulators-0 {
143 compatible = "qcom,pm8998-rpmh 143 compatible = "qcom,pm8998-rpmh-regulators";
144 qcom,pmic-id = "a"; 144 qcom,pmic-id = "a";
145 145
146 vreg_l1a_0p875: ldo1 { 146 vreg_l1a_0p875: ldo1 {
147 regulator-min-microvol 147 regulator-min-microvolt = <880000>;
148 regulator-max-microvol 148 regulator-max-microvolt = <880000>;
149 regulator-initial-mode 149 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
150 }; 150 };
151 151
152 vreg_l5a_0p8: ldo5 { 152 vreg_l5a_0p8: ldo5 {
153 regulator-min-microvol 153 regulator-min-microvolt = <800000>;
154 regulator-max-microvol 154 regulator-max-microvolt = <800000>;
155 regulator-initial-mode 155 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
156 }; 156 };
157 157
158 vreg_l7a_1p8: ldo7 { 158 vreg_l7a_1p8: ldo7 {
159 regulator-min-microvol 159 regulator-min-microvolt = <1800000>;
160 regulator-max-microvol 160 regulator-max-microvolt = <1800000>;
161 regulator-initial-mode 161 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
162 }; 162 };
163 163
164 vreg_l12a_1p8: ldo12 { 164 vreg_l12a_1p8: ldo12 {
165 regulator-min-microvol 165 regulator-min-microvolt = <1800000>;
166 regulator-max-microvol 166 regulator-max-microvolt = <1800000>;
167 regulator-initial-mode 167 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
168 }; 168 };
169 169
170 vreg_l13a_2p95: ldo13 { 170 vreg_l13a_2p95: ldo13 {
171 regulator-min-microvol 171 regulator-min-microvolt = <1800000>;
172 regulator-max-microvol 172 regulator-max-microvolt = <2960000>;
173 regulator-initial-mode 173 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
174 }; 174 };
175 175
176 vreg_l14a_1p8: ldo14 { 176 vreg_l14a_1p8: ldo14 {
177 regulator-min-microvol 177 regulator-min-microvolt = <1800000>;
178 regulator-max-microvol 178 regulator-max-microvolt = <1800000>;
179 regulator-initial-mode 179 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
180 regulator-boot-on; 180 regulator-boot-on;
181 regulator-always-on; 181 regulator-always-on;
182 }; 182 };
183 183
184 vreg_l17a_1p3: ldo17 { 184 vreg_l17a_1p3: ldo17 {
185 regulator-min-microvol 185 regulator-min-microvolt = <1304000>;
186 regulator-max-microvol 186 regulator-max-microvolt = <1304000>;
187 regulator-initial-mode 187 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
188 }; 188 };
189 189
190 vreg_l20a_2p95: ldo20 { 190 vreg_l20a_2p95: ldo20 {
191 regulator-min-microvol 191 regulator-min-microvolt = <2960000>;
192 regulator-max-microvol 192 regulator-max-microvolt = <2968000>;
193 regulator-initial-mode 193 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
194 }; 194 };
195 195
196 vreg_l21a_2p95: ldo21 { 196 vreg_l21a_2p95: ldo21 {
197 regulator-min-microvol 197 regulator-min-microvolt = <2960000>;
198 regulator-max-microvol 198 regulator-max-microvolt = <2968000>;
199 regulator-initial-mode 199 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
200 }; 200 };
201 201
202 vreg_l23a_3p3: ldo23 { 202 vreg_l23a_3p3: ldo23 {
203 regulator-min-microvol 203 regulator-min-microvolt = <3300000>;
204 regulator-max-microvol 204 regulator-max-microvolt = <3312000>;
205 regulator-initial-mode 205 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
206 }; 206 };
207 207
208 vreg_l24a_3p075: ldo24 { 208 vreg_l24a_3p075: ldo24 {
209 regulator-min-microvol 209 regulator-min-microvolt = <3088000>;
210 regulator-max-microvol 210 regulator-max-microvolt = <3088000>;
211 regulator-initial-mode 211 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
212 }; 212 };
213 213
214 vreg_l25a_3p3: ldo25 { 214 vreg_l25a_3p3: ldo25 {
215 regulator-min-microvol 215 regulator-min-microvolt = <3300000>;
216 regulator-max-microvol 216 regulator-max-microvolt = <3312000>;
217 regulator-initial-mode 217 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218 }; 218 };
219 219
220 vreg_l26a_1p2: ldo26 { 220 vreg_l26a_1p2: ldo26 {
221 regulator-min-microvol 221 regulator-min-microvolt = <1200000>;
222 regulator-max-microvol 222 regulator-max-microvolt = <1200000>;
223 regulator-initial-mode 223 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
224 regulator-boot-on; 224 regulator-boot-on;
225 }; 225 };
226 }; 226 };
227 }; 227 };
228 228
229 &cdsp_pas { 229 &cdsp_pas {
230 status = "okay"; 230 status = "okay";
231 firmware-name = "qcom/sdm845/beryllium 231 firmware-name = "qcom/sdm845/beryllium/cdsp.mbn";
232 }; 232 };
233 233
234 &gcc { 234 &gcc {
235 protected-clocks = <GCC_QSPI_CORE_CLK> 235 protected-clocks = <GCC_QSPI_CORE_CLK>,
236 <GCC_QSPI_CORE_CLK_ 236 <GCC_QSPI_CORE_CLK_SRC>,
237 <GCC_QSPI_CNOC_PERI 237 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
238 <GCC_LPASS_Q6_AXI_C 238 <GCC_LPASS_Q6_AXI_CLK>,
239 <GCC_LPASS_SWAY_CLK 239 <GCC_LPASS_SWAY_CLK>;
240 }; 240 };
241 241
242 &gmu { 242 &gmu {
243 status = "okay"; 243 status = "okay";
244 }; 244 };
245 245
246 &gpu { 246 &gpu {
247 status = "okay"; 247 status = "okay";
248 248
249 zap-shader { 249 zap-shader {
250 memory-region = <&gpu_mem>; 250 memory-region = <&gpu_mem>;
251 firmware-name = "qcom/sdm845/b 251 firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn";
252 }; 252 };
253 }; 253 };
254 254
255 &ibb { 255 &ibb {
256 regulator-min-microvolt = <4600000>; 256 regulator-min-microvolt = <4600000>;
257 regulator-max-microvolt = <6000000>; 257 regulator-max-microvolt = <6000000>;
258 regulator-over-current-protection; 258 regulator-over-current-protection;
259 regulator-pull-down; 259 regulator-pull-down;
260 regulator-soft-start; 260 regulator-soft-start;
261 qcom,discharge-resistor-kohms = <300>; 261 qcom,discharge-resistor-kohms = <300>;
262 }; 262 };
263 263
264 &lab { 264 &lab {
265 regulator-min-microvolt = <4600000>; 265 regulator-min-microvolt = <4600000>;
266 regulator-max-microvolt = <6000000>; 266 regulator-max-microvolt = <6000000>;
267 regulator-over-current-protection; 267 regulator-over-current-protection;
268 regulator-pull-down; 268 regulator-pull-down;
269 regulator-soft-start; 269 regulator-soft-start;
270 }; 270 };
271 271
272 &mdss { 272 &mdss {
273 status = "okay"; 273 status = "okay";
274 }; 274 };
275 275
276 &mdss_dsi0 { 276 &mdss_dsi0 {
277 status = "okay"; 277 status = "okay";
278 vdda-supply = <&vreg_l26a_1p2>; 278 vdda-supply = <&vreg_l26a_1p2>;
279 279
280 display_panel: panel@0 { 280 display_panel: panel@0 {
281 reg = <0>; 281 reg = <0>;
282 vddio-supply = <&vreg_l14a_1p8 282 vddio-supply = <&vreg_l14a_1p8>;
283 vddpos-supply = <&lab>; 283 vddpos-supply = <&lab>;
284 vddneg-supply = <&ibb>; 284 vddneg-supply = <&ibb>;
285 285
286 backlight = <&pmi8998_wled>; 286 backlight = <&pmi8998_wled>;
287 reset-gpios = <&tlmm 6 GPIO_AC 287 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
288 288
289 status = "disabled"; 289 status = "disabled";
290 290
291 port { 291 port {
292 panel_in_0: endpoint { 292 panel_in_0: endpoint {
293 remote-endpoin 293 remote-endpoint = <&mdss_dsi0_out>;
294 }; 294 };
295 }; 295 };
296 }; 296 };
297 }; 297 };
298 298
299 &mdss_dsi0_out { 299 &mdss_dsi0_out {
300 remote-endpoint = <&panel_in_0>; 300 remote-endpoint = <&panel_in_0>;
301 data-lanes = <0 1 2 3>; 301 data-lanes = <0 1 2 3>;
302 }; 302 };
303 303
304 &mdss_dsi0_phy { 304 &mdss_dsi0_phy {
305 status = "okay"; 305 status = "okay";
306 vdds-supply = <&vreg_l1a_0p875>; 306 vdds-supply = <&vreg_l1a_0p875>;
307 }; 307 };
308 308
309 &mss_pil { 309 &mss_pil {
310 status = "okay"; 310 status = "okay";
311 firmware-name = "qcom/sdm845/beryllium 311 firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn";
312 }; 312 };
313 313
314 &ipa { 314 &ipa {
315 qcom,gsi-loader = "self"; 315 qcom,gsi-loader = "self";
316 memory-region = <&ipa_fw_mem>; 316 memory-region = <&ipa_fw_mem>;
317 firmware-name = "qcom/sdm845/beryllium 317 firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
318 status = "okay"; 318 status = "okay";
319 }; 319 };
320 320
321 &pm8998_gpios { 321 &pm8998_gpios {
322 vol_up_pin_a: vol-up-active-state { 322 vol_up_pin_a: vol-up-active-state {
323 pins = "gpio6"; 323 pins = "gpio6";
324 function = "normal"; 324 function = "normal";
325 input-enable; 325 input-enable;
326 bias-pull-up; 326 bias-pull-up;
327 qcom,drive-strength = <PMIC_GP 327 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
328 }; 328 };
329 }; 329 };
330 330
331 &pmi8998_lpg { 331 &pmi8998_lpg {
332 status = "okay"; 332 status = "okay";
333 333
334 led@5 { 334 led@5 {
335 reg = <5>; 335 reg = <5>;
336 color = <LED_COLOR_ID_WHITE>; 336 color = <LED_COLOR_ID_WHITE>;
337 function = LED_FUNCTION_STATUS 337 function = LED_FUNCTION_STATUS;
338 }; 338 };
339 }; 339 };
340 340
341 &pmi8998_wled { 341 &pmi8998_wled {
342 status = "okay"; 342 status = "okay";
343 qcom,current-boost-limit = <970>; 343 qcom,current-boost-limit = <970>;
344 qcom,ovp-millivolt = <29600>; 344 qcom,ovp-millivolt = <29600>;
345 qcom,current-limit-microamp = <20000>; 345 qcom,current-limit-microamp = <20000>;
346 qcom,num-strings = <2>; 346 qcom,num-strings = <2>;
347 qcom,switching-freq = <600>; 347 qcom,switching-freq = <600>;
348 qcom,external-pfet; 348 qcom,external-pfet;
349 qcom,cabc; 349 qcom,cabc;
350 }; 350 };
351 351
352 &pmi8998_charger { 352 &pmi8998_charger {
353 monitored-battery = <&battery>; 353 monitored-battery = <&battery>;
354 354
355 status = "okay"; 355 status = "okay";
356 }; <<
357 <<
358 &pmi8998_flash { <<
359 status = "okay"; <<
360 <<
361 led-0 { <<
362 function = LED_FUNCTION_FLASH; <<
363 color = <LED_COLOR_ID_WHITE>; <<
364 led-sources = <1>; <<
365 led-max-microamp = <500000>; <<
366 flash-max-microamp = <1500000> <<
367 flash-max-timeout-us = <128000 <<
368 }; <<
369 <<
370 led-1 { <<
371 function = LED_FUNCTION_FLASH; <<
372 color = <LED_COLOR_ID_YELLOW>; <<
373 led-sources = <2>; <<
374 led-max-microamp = <500000>; <<
375 flash-max-microamp = <1500000> <<
376 flash-max-timeout-us = <128000 <<
377 }; <<
378 }; 356 };
379 357
380 &pm8998_resin { 358 &pm8998_resin {
381 linux,code = <KEY_VOLUMEDOWN>; 359 linux,code = <KEY_VOLUMEDOWN>;
382 status = "okay"; 360 status = "okay";
383 }; 361 };
384 362
385 /* QUAT I2S Uses 1 I2S SD Line for audio on TA 363 /* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
386 &q6afedai { 364 &q6afedai {
387 dai@22 { 365 dai@22 {
388 reg = <QUATERNARY_MI2S_RX>; 366 reg = <QUATERNARY_MI2S_RX>;
389 qcom,sd-lines = <0>; 367 qcom,sd-lines = <0>;
390 }; 368 };
391 }; 369 };
392 370
393 &q6asmdai { 371 &q6asmdai {
394 dai@0 { 372 dai@0 {
395 reg = <0>; 373 reg = <0>;
396 }; 374 };
397 375
398 dai@1 { 376 dai@1 {
399 reg = <1>; 377 reg = <1>;
400 }; 378 };
401 379
402 dai@2 { 380 dai@2 {
403 reg = <2>; 381 reg = <2>;
404 }; 382 };
405 }; 383 };
406 384
407 &qupv3_id_0 { 385 &qupv3_id_0 {
408 status = "okay"; 386 status = "okay";
409 }; 387 };
410 388
411 &sdhc_2 { 389 &sdhc_2 {
412 status = "okay"; 390 status = "okay";
413 391
414 pinctrl-names = "default"; 392 pinctrl-names = "default";
415 pinctrl-0 = <&sdc2_default_state &sdc2 393 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
416 394
417 vmmc-supply = <&vreg_l21a_2p95>; 395 vmmc-supply = <&vreg_l21a_2p95>;
418 vqmmc-supply = <&vreg_l13a_2p95>; 396 vqmmc-supply = <&vreg_l13a_2p95>;
419 397
420 bus-width = <4>; 398 bus-width = <4>;
421 cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH 399 cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
422 }; 400 };
423 401
424 &sound { 402 &sound {
425 compatible = "qcom,db845c-sndcard", "q 403 compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
426 pinctrl-0 = <&quat_mi2s_active 404 pinctrl-0 = <&quat_mi2s_active
427 &quat_mi2s_sd0_active> 405 &quat_mi2s_sd0_active>;
428 pinctrl-names = "default"; 406 pinctrl-names = "default";
429 model = "Xiaomi Poco F1"; 407 model = "Xiaomi Poco F1";
430 audio-routing = 408 audio-routing =
431 "RX_BIAS", "MCLK", 409 "RX_BIAS", "MCLK",
432 "AMIC1", "MIC BIAS1", 410 "AMIC1", "MIC BIAS1",
433 "AMIC2", "MIC BIAS2", 411 "AMIC2", "MIC BIAS2",
434 "AMIC3", "MIC BIAS3"; 412 "AMIC3", "MIC BIAS3";
435 413
436 mm1-dai-link { 414 mm1-dai-link {
437 link-name = "MultiMedia1"; 415 link-name = "MultiMedia1";
438 cpu { 416 cpu {
439 sound-dai = <&q6asmdai 417 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
440 }; 418 };
441 }; 419 };
442 420
443 mm2-dai-link { 421 mm2-dai-link {
444 link-name = "MultiMedia2"; 422 link-name = "MultiMedia2";
445 cpu { 423 cpu {
446 sound-dai = <&q6asmdai 424 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
447 }; 425 };
448 }; 426 };
449 427
450 mm3-dai-link { 428 mm3-dai-link {
451 link-name = "MultiMedia3"; 429 link-name = "MultiMedia3";
452 cpu { 430 cpu {
453 sound-dai = <&q6asmdai 431 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
454 }; 432 };
455 }; 433 };
456 434
457 slim-dai-link { 435 slim-dai-link {
458 link-name = "SLIM Playback"; 436 link-name = "SLIM Playback";
459 cpu { 437 cpu {
460 sound-dai = <&q6afedai 438 sound-dai = <&q6afedai SLIMBUS_0_RX>;
461 }; 439 };
462 440
463 platform { 441 platform {
464 sound-dai = <&q6routin 442 sound-dai = <&q6routing>;
465 }; 443 };
466 444
467 codec { 445 codec {
468 sound-dai = <&wcd9340 446 sound-dai = <&wcd9340 0>;
469 }; 447 };
470 }; 448 };
471 449
472 slimcap-dai-link { 450 slimcap-dai-link {
473 link-name = "SLIM Capture"; 451 link-name = "SLIM Capture";
474 cpu { 452 cpu {
475 sound-dai = <&q6afedai 453 sound-dai = <&q6afedai SLIMBUS_0_TX>;
476 }; 454 };
477 455
478 platform { 456 platform {
479 sound-dai = <&q6routin 457 sound-dai = <&q6routing>;
480 }; 458 };
481 459
482 codec { 460 codec {
483 sound-dai = <&wcd9340 461 sound-dai = <&wcd9340 1>;
484 }; 462 };
485 }; 463 };
486 }; 464 };
487 465
488 &tlmm { 466 &tlmm {
489 gpio-reserved-ranges = <0 4>, <81 4>; 467 gpio-reserved-ranges = <0 4>, <81 4>;
490 468
491 sdc2_default_state: sdc2-default-state 469 sdc2_default_state: sdc2-default-state {
492 clk-pins { 470 clk-pins {
493 pins = "sdc2_clk"; 471 pins = "sdc2_clk";
494 bias-disable; 472 bias-disable;
495 drive-strength = <16>; 473 drive-strength = <16>;
496 }; 474 };
497 475
498 cmd-pins { 476 cmd-pins {
499 pins = "sdc2_cmd"; 477 pins = "sdc2_cmd";
500 bias-pull-up; 478 bias-pull-up;
501 drive-strength = <10>; 479 drive-strength = <10>;
502 }; 480 };
503 481
504 data-pins { 482 data-pins {
505 pins = "sdc2_data"; 483 pins = "sdc2_data";
506 bias-pull-up; 484 bias-pull-up;
507 drive-strength = <10>; 485 drive-strength = <10>;
508 }; 486 };
509 }; 487 };
510 488
511 sdc2_card_det_n: sd-card-det-n-state { 489 sdc2_card_det_n: sd-card-det-n-state {
512 pins = "gpio126"; 490 pins = "gpio126";
513 function = "gpio"; 491 function = "gpio";
514 bias-pull-up; 492 bias-pull-up;
515 }; 493 };
516 }; 494 };
517 495
518 &uart6 { 496 &uart6 {
519 status = "okay"; 497 status = "okay";
520 498
521 pinctrl-0 = <&qup_uart6_4pin>; 499 pinctrl-0 = <&qup_uart6_4pin>;
522 500
523 bluetooth { 501 bluetooth {
524 compatible = "qcom,wcn3990-bt" 502 compatible = "qcom,wcn3990-bt";
525 503
526 vddio-supply = <&vreg_s4a_1p8> 504 vddio-supply = <&vreg_s4a_1p8>;
527 vddxo-supply = <&vreg_l7a_1p8> 505 vddxo-supply = <&vreg_l7a_1p8>;
528 vddrf-supply = <&vreg_l17a_1p3 506 vddrf-supply = <&vreg_l17a_1p3>;
529 vddch0-supply = <&vreg_l25a_3p 507 vddch0-supply = <&vreg_l25a_3p3>;
530 max-speed = <3200000>; 508 max-speed = <3200000>;
531 }; 509 };
532 }; 510 };
533 511
534 &ufs_mem_hc { 512 &ufs_mem_hc {
535 status = "okay"; 513 status = "okay";
536 514
537 reset-gpios = <&tlmm 150 GPIO_ACTIVE_L 515 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
538 516
539 vcc-supply = <&vreg_l20a_2p95>; 517 vcc-supply = <&vreg_l20a_2p95>;
540 vcc-max-microamp = <800000>; 518 vcc-max-microamp = <800000>;
541 }; 519 };
542 520
543 &ufs_mem_phy { 521 &ufs_mem_phy {
544 status = "okay"; 522 status = "okay";
545 523
546 vdda-phy-supply = <&vreg_l1a_0p875>; 524 vdda-phy-supply = <&vreg_l1a_0p875>;
547 vdda-pll-supply = <&vreg_l26a_1p2>; 525 vdda-pll-supply = <&vreg_l26a_1p2>;
548 }; 526 };
549 527
550 &usb_1 { 528 &usb_1 {
551 status = "okay"; 529 status = "okay";
552 }; 530 };
553 531
554 &usb_1_dwc3 { 532 &usb_1_dwc3 {
555 dr_mode = "peripheral"; 533 dr_mode = "peripheral";
556 }; 534 };
557 535
558 &usb_1_hsphy { 536 &usb_1_hsphy {
559 status = "okay"; 537 status = "okay";
560 538
561 vdd-supply = <&vreg_l1a_0p875>; 539 vdd-supply = <&vreg_l1a_0p875>;
562 vdda-pll-supply = <&vreg_l12a_1p8>; 540 vdda-pll-supply = <&vreg_l12a_1p8>;
563 vdda-phy-dpdm-supply = <&vreg_l24a_3p0 541 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
564 542
565 qcom,imp-res-offset-value = <8>; 543 qcom,imp-res-offset-value = <8>;
566 qcom,hstx-trim-value = <QUSB2_V2_HSTX_ 544 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
567 qcom,preemphasis-level = <QUSB2_V2_PRE 545 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
568 qcom,preemphasis-width = <QUSB2_V2_PRE 546 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
569 }; 547 };
570 548
571 &usb_1_qmpphy { 549 &usb_1_qmpphy {
572 status = "okay"; 550 status = "okay";
573 551
574 vdda-phy-supply = <&vreg_l26a_1p2>; 552 vdda-phy-supply = <&vreg_l26a_1p2>;
575 vdda-pll-supply = <&vreg_l1a_0p875>; 553 vdda-pll-supply = <&vreg_l1a_0p875>;
576 }; 554 };
577 555
578 &venus { 556 &venus {
579 status = "okay"; 557 status = "okay";
580 firmware-name = "qcom/sdm845/beryllium 558 firmware-name = "qcom/sdm845/beryllium/venus.mbn";
581 }; 559 };
582 560
583 &wcd9340 { 561 &wcd9340 {
584 reset-gpios = <&tlmm 64 GPIO_ACTIVE_HI 562 reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
585 vdd-buck-supply = <&vreg_s4a_1p8>; 563 vdd-buck-supply = <&vreg_s4a_1p8>;
586 vdd-buck-sido-supply = <&vreg_s4a_1p8> 564 vdd-buck-sido-supply = <&vreg_s4a_1p8>;
587 vdd-tx-supply = <&vreg_s4a_1p8>; 565 vdd-tx-supply = <&vreg_s4a_1p8>;
588 vdd-rx-supply = <&vreg_s4a_1p8>; 566 vdd-rx-supply = <&vreg_s4a_1p8>;
589 vdd-io-supply = <&vreg_s4a_1p8>; 567 vdd-io-supply = <&vreg_s4a_1p8>;
590 qcom,micbias1-microvolt = <2700000>; 568 qcom,micbias1-microvolt = <2700000>;
591 qcom,micbias2-microvolt = <1800000>; 569 qcom,micbias2-microvolt = <1800000>;
592 qcom,micbias3-microvolt = <2700000>; 570 qcom,micbias3-microvolt = <2700000>;
593 qcom,micbias4-microvolt = <2700000>; 571 qcom,micbias4-microvolt = <2700000>;
594 }; 572 };
595 573
596 &wifi { 574 &wifi {
597 status = "okay"; 575 status = "okay";
598 576
599 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8> 577 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
600 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 578 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
601 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 579 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
602 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 580 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
603 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; 581 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
604 }; 582 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.