1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2020, Xilin Wu <strongtz@yeah. 3 * Copyright (c) 2020, Xilin Wu <strongtz@yeah.net>
4 * Copyright (c) 2022, Molly Sophia <mollysophi 4 * Copyright (c) 2022, Molly Sophia <mollysophia379@gmail.com>
5 */ 5 */
6 6
7 /dts-v1/; 7 /dts-v1/;
8 8
9 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regu 11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
12 #include <dt-bindings/input/linux-event-codes. 12 #include <dt-bindings/input/linux-event-codes.h>
13 #include <dt-bindings/sound/qcom,q6afe.h> 13 #include <dt-bindings/sound/qcom,q6afe.h>
14 #include <dt-bindings/sound/qcom,q6asm.h> 14 #include <dt-bindings/sound/qcom,q6asm.h>
15 #include "sdm845.dtsi" 15 #include "sdm845.dtsi"
16 #include "sdm845-wcd9340.dtsi" 16 #include "sdm845-wcd9340.dtsi"
17 #include "pm8998.dtsi" 17 #include "pm8998.dtsi"
18 #include "pmi8998.dtsi" 18 #include "pmi8998.dtsi"
19 #include "pm8005.dtsi" 19 #include "pm8005.dtsi"
20 20
21 /* 21 /*
22 * Delete following upstream (sdm845.dtsi) res 22 * Delete following upstream (sdm845.dtsi) reserved
23 * memory mappings which are different in this 23 * memory mappings which are different in this device.
24 */ 24 */
25 /delete-node/ &rmtfs_mem; 25 /delete-node/ &rmtfs_mem;
26 /delete-node/ &adsp_mem; 26 /delete-node/ &adsp_mem;
27 /delete-node/ &wlan_msa_mem; 27 /delete-node/ &wlan_msa_mem;
28 /delete-node/ &mpss_region; 28 /delete-node/ &mpss_region;
29 /delete-node/ &venus_mem; 29 /delete-node/ &venus_mem;
30 /delete-node/ &cdsp_mem; 30 /delete-node/ &cdsp_mem;
31 /delete-node/ &mba_region; 31 /delete-node/ &mba_region;
32 /delete-node/ &slpi_mem; 32 /delete-node/ &slpi_mem;
33 /delete-node/ &spss_mem; 33 /delete-node/ &spss_mem;
34 34
35 / { 35 / {
36 model = "Xiaomi Mi MIX 2S"; 36 model = "Xiaomi Mi MIX 2S";
37 compatible = "xiaomi,polaris", "qcom,s 37 compatible = "xiaomi,polaris", "qcom,sdm845";
38 chassis-type = "handset"; 38 chassis-type = "handset";
39 39
40 /* required for bootloader to select c 40 /* required for bootloader to select correct board */
41 qcom,msm-id = <0x141 0x20001>; 41 qcom,msm-id = <0x141 0x20001>;
42 qcom,board-id = <0x2a 0x0>; 42 qcom,board-id = <0x2a 0x0>;
43 43
44 aliases { 44 aliases {
45 serial0 = &uart9; 45 serial0 = &uart9;
46 serial1 = &uart6; 46 serial1 = &uart6;
47 }; 47 };
48 48
49 gpio-keys { 49 gpio-keys {
50 compatible = "gpio-keys"; 50 compatible = "gpio-keys";
51 autorepeat; 51 autorepeat;
52 52
53 pinctrl-names = "default"; 53 pinctrl-names = "default";
54 pinctrl-0 = <&volume_up_gpio>; 54 pinctrl-0 = <&volume_up_gpio>;
55 55
56 key-vol-up { 56 key-vol-up {
57 label = "Volume Up"; 57 label = "Volume Up";
58 linux,code = <KEY_VOLU 58 linux,code = <KEY_VOLUMEUP>;
59 gpios = <&pm8998_gpios 59 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
60 debounce-interval = <1 60 debounce-interval = <15>;
61 }; 61 };
62 }; 62 };
63 63
64 reserved-memory { 64 reserved-memory {
65 adsp_mem: memory@8c500000 { 65 adsp_mem: memory@8c500000 {
66 reg = <0 0x8c500000 0 66 reg = <0 0x8c500000 0 0x1e00000>;
67 no-map; 67 no-map;
68 }; 68 };
69 69
70 wlan_msa_mem: memory@8e300000 70 wlan_msa_mem: memory@8e300000 {
71 reg = <0 0x8e300000 0 71 reg = <0 0x8e300000 0 0x100000>;
72 no-map; 72 no-map;
73 }; 73 };
74 74
75 mpss_region: memory@8e400000 { 75 mpss_region: memory@8e400000 {
76 reg = <0 0x8e400000 0 76 reg = <0 0x8e400000 0 0x7800000>;
77 no-map; 77 no-map;
78 }; 78 };
79 79
80 venus_mem: memory@95c00000 { 80 venus_mem: memory@95c00000 {
81 reg = <0 0x95c00000 0 81 reg = <0 0x95c00000 0 0x500000>;
82 no-map; 82 no-map;
83 }; 83 };
84 84
85 cdsp_mem: memory@96100000 { 85 cdsp_mem: memory@96100000 {
86 reg = <0 0x96100000 0 86 reg = <0 0x96100000 0 0x800000>;
87 no-map; 87 no-map;
88 }; 88 };
89 89
90 mba_region: memory@96900000 { 90 mba_region: memory@96900000 {
91 reg = <0 0x96900000 0 91 reg = <0 0x96900000 0 0x200000>;
92 no-map; 92 no-map;
93 }; 93 };
94 94
95 slpi_mem: memory@96b00000 { 95 slpi_mem: memory@96b00000 {
96 reg = <0 0x96b00000 0 96 reg = <0 0x96b00000 0 0x1400000>;
97 no-map; 97 no-map;
98 }; 98 };
99 99
100 spss_mem: memory@97f00000 { 100 spss_mem: memory@97f00000 {
101 reg = <0 0x97f00000 0 101 reg = <0 0x97f00000 0 0x100000>;
102 no-map; 102 no-map;
103 }; 103 };
104 104
105 rmtfs_mem: memory@f6301000 { 105 rmtfs_mem: memory@f6301000 {
106 compatible = "qcom,rmt 106 compatible = "qcom,rmtfs-mem";
107 reg = <0 0xf6301000 0 107 reg = <0 0xf6301000 0 0x200000>;
108 no-map; 108 no-map;
109 109
110 qcom,client-id = <1>; 110 qcom,client-id = <1>;
111 qcom,vmid = <QCOM_SCM_ 111 qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
112 }; 112 };
113 }; 113 };
114 114
115 battery: battery { 115 battery: battery {
116 compatible = "simple-battery"; 116 compatible = "simple-battery";
117 117
118 charge-full-design-microamp-ho 118 charge-full-design-microamp-hours = <3400000>;
119 voltage-min-design-microvolt = 119 voltage-min-design-microvolt = <3400000>;
120 voltage-max-design-microvolt = 120 voltage-max-design-microvolt = <4400000>;
121 }; 121 };
122 122
123 vreg_tp_vddio: vreg-tp-vddio { 123 vreg_tp_vddio: vreg-tp-vddio {
124 compatible = "regulator-fixed" 124 compatible = "regulator-fixed";
125 regulator-name = "vreg_tp_vddi 125 regulator-name = "vreg_tp_vddio";
126 126
127 regulator-min-microvolt = <180 127 regulator-min-microvolt = <1800000>;
128 regulator-max-microvolt = <180 128 regulator-max-microvolt = <1800000>;
129 129
130 gpio = <&tlmm 23 GPIO_ACTIVE_H 130 gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
131 regulator-always-on; 131 regulator-always-on;
132 regulator-boot-on; 132 regulator-boot-on;
133 enable-active-high; 133 enable-active-high;
134 }; 134 };
135 135
136 vreg_s4a_1p8: vreg-s4a-1p8 { 136 vreg_s4a_1p8: vreg-s4a-1p8 {
137 compatible = "regulator-fixed" 137 compatible = "regulator-fixed";
138 regulator-name = "vreg_s4a_1p8 138 regulator-name = "vreg_s4a_1p8";
139 139
140 regulator-min-microvolt = <180 140 regulator-min-microvolt = <1800000>;
141 regulator-max-microvolt = <180 141 regulator-max-microvolt = <1800000>;
142 regulator-always-on; 142 regulator-always-on;
143 }; 143 };
144 }; 144 };
145 145
146 &apps_rsc { 146 &apps_rsc {
147 regulators-0 { 147 regulators-0 {
148 compatible = "qcom,pm8998-rpmh 148 compatible = "qcom,pm8998-rpmh-regulators";
149 qcom,pmic-id = "a"; 149 qcom,pmic-id = "a";
150 150
151 vreg_s2a_1p1: smps2 { 151 vreg_s2a_1p1: smps2 {
152 regulator-min-microvol 152 regulator-min-microvolt = <1100000>;
153 regulator-max-microvol 153 regulator-max-microvolt = <1100000>;
154 }; 154 };
155 155
156 vreg_s3a_1p35: smps3 { 156 vreg_s3a_1p35: smps3 {
157 regulator-min-microvol 157 regulator-min-microvolt = <1352000>;
158 regulator-max-microvol 158 regulator-max-microvolt = <1352000>;
159 }; 159 };
160 160
161 vreg_s5a_2p04: smps5 { 161 vreg_s5a_2p04: smps5 {
162 regulator-min-microvol 162 regulator-min-microvolt = <1904000>;
163 regulator-max-microvol 163 regulator-max-microvolt = <2040000>;
164 }; 164 };
165 165
166 vreg_s7a_1p025: smps7 { 166 vreg_s7a_1p025: smps7 {
167 regulator-min-microvol 167 regulator-min-microvolt = <900000>;
168 regulator-max-microvol 168 regulator-max-microvolt = <1028000>;
169 }; 169 };
170 170
171 vdda_mipi_dsi0_pll: 171 vdda_mipi_dsi0_pll:
172 vdda_ufs1_core: 172 vdda_ufs1_core:
173 vreg_l1a_0p875: ldo1 { 173 vreg_l1a_0p875: ldo1 {
174 regulator-min-microvol 174 regulator-min-microvolt = <880000>;
175 regulator-max-microvol 175 regulator-max-microvolt = <880000>;
176 regulator-initial-mode 176 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
177 }; 177 };
178 178
179 vreg_l2a_1p2: ldo2 { 179 vreg_l2a_1p2: ldo2 {
180 regulator-min-microvol 180 regulator-min-microvolt = <1200000>;
181 regulator-max-microvol 181 regulator-max-microvolt = <1200000>;
182 regulator-initial-mode 182 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
183 regulator-always-on; 183 regulator-always-on;
184 }; 184 };
185 185
186 vreg_l3a_1p0: ldo3 { 186 vreg_l3a_1p0: ldo3 {
187 regulator-min-microvol 187 regulator-min-microvolt = <1000000>;
188 regulator-max-microvol 188 regulator-max-microvolt = <1000000>;
189 regulator-initial-mode 189 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
190 }; 190 };
191 191
192 vreg_l5a_0p8: ldo5 { 192 vreg_l5a_0p8: ldo5 {
193 regulator-min-microvol 193 regulator-min-microvolt = <800000>;
194 regulator-max-microvol 194 regulator-max-microvolt = <800000>;
195 regulator-initial-mode 195 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
196 }; 196 };
197 197
198 vreg_l6a_1p8: ldo6 { 198 vreg_l6a_1p8: ldo6 {
199 regulator-min-microvol 199 regulator-min-microvolt = <1856000>;
200 regulator-max-microvol 200 regulator-max-microvolt = <1856000>;
201 regulator-initial-mode 201 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
202 }; 202 };
203 203
204 vreg_l7a_1p8: ldo7 { 204 vreg_l7a_1p8: ldo7 {
205 regulator-min-microvol 205 regulator-min-microvolt = <1800000>;
206 regulator-max-microvol 206 regulator-max-microvolt = <1800000>;
207 regulator-initial-mode 207 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
208 }; 208 };
209 209
210 vreg_l8a_1p2: ldo8 { 210 vreg_l8a_1p2: ldo8 {
211 regulator-min-microvol 211 regulator-min-microvolt = <1200000>;
212 regulator-max-microvol 212 regulator-max-microvolt = <1248000>;
213 regulator-initial-mode 213 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
214 }; 214 };
215 215
216 vreg_l9a_1p8: ldo9 { 216 vreg_l9a_1p8: ldo9 {
217 regulator-min-microvol 217 regulator-min-microvolt = <1704000>;
218 regulator-max-microvol 218 regulator-max-microvolt = <2928000>;
219 regulator-initial-mode 219 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
220 }; 220 };
221 221
222 vreg_l10a_2p95: ldo10 { 222 vreg_l10a_2p95: ldo10 {
223 regulator-min-microvol 223 regulator-min-microvolt = <1704000>;
224 regulator-max-microvol 224 regulator-max-microvolt = <2928000>;
225 regulator-initial-mode 225 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
226 }; 226 };
227 227
228 vreg_l11a_1p05: ldo11 { 228 vreg_l11a_1p05: ldo11 {
229 regulator-min-microvol 229 regulator-min-microvolt = <1000000>;
230 regulator-max-microvol 230 regulator-max-microvolt = <1048000>;
231 regulator-initial-mode 231 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
232 }; 232 };
233 233
234 vreg_l12a_1p8: ldo12 { 234 vreg_l12a_1p8: ldo12 {
235 regulator-min-microvol 235 regulator-min-microvolt = <1800000>;
236 regulator-max-microvol 236 regulator-max-microvolt = <1800000>;
237 regulator-initial-mode 237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238 }; 238 };
239 239
240 vreg_l13a_2p95: ldo13 { 240 vreg_l13a_2p95: ldo13 {
241 regulator-min-microvol 241 regulator-min-microvolt = <1800000>;
242 regulator-max-microvol 242 regulator-max-microvolt = <2960000>;
243 regulator-initial-mode 243 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
244 }; 244 };
245 245
246 vreg_l14a_1p8: ldo14 { 246 vreg_l14a_1p8: ldo14 {
247 regulator-min-microvol 247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvol 248 regulator-max-microvolt = <1880000>;
249 regulator-initial-mode 249 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
250 regulator-always-on; 250 regulator-always-on;
251 }; 251 };
252 252
253 vreg_l15a_1p8: ldo15 { 253 vreg_l15a_1p8: ldo15 {
254 regulator-min-microvol 254 regulator-min-microvolt = <1800000>;
255 regulator-max-microvol 255 regulator-max-microvolt = <1800000>;
256 regulator-initial-mode 256 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
257 }; 257 };
258 258
259 vreg_l16a_2p7: ldo16 { 259 vreg_l16a_2p7: ldo16 {
260 regulator-min-microvol 260 regulator-min-microvolt = <2704000>;
261 regulator-max-microvol 261 regulator-max-microvolt = <2704000>;
262 regulator-initial-mode 262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
263 }; 263 };
264 264
265 vreg_l17a_1p3: ldo17 { 265 vreg_l17a_1p3: ldo17 {
266 regulator-min-microvol 266 regulator-min-microvolt = <1304000>;
267 regulator-max-microvol 267 regulator-max-microvolt = <1304000>;
268 regulator-initial-mode 268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
269 regulator-always-on; 269 regulator-always-on;
270 }; 270 };
271 271
272 vreg_l18a_2p9: ldo18 { 272 vreg_l18a_2p9: ldo18 {
273 regulator-min-microvol 273 regulator-min-microvolt = <2704000>;
274 regulator-max-microvol 274 regulator-max-microvolt = <2960000>;
275 regulator-initial-mode 275 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
276 }; 276 };
277 277
278 vreg_l19a_3p1: ldo19 { 278 vreg_l19a_3p1: ldo19 {
279 regulator-min-microvol 279 regulator-min-microvolt = <2856000>;
280 regulator-max-microvol 280 regulator-max-microvolt = <3104000>;
281 regulator-initial-mode 281 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
282 }; 282 };
283 283
284 vreg_l20a_2p95: ldo20 { 284 vreg_l20a_2p95: ldo20 {
285 regulator-min-microvol 285 regulator-min-microvolt = <2704000>;
286 regulator-max-microvol 286 regulator-max-microvolt = <2960000>;
287 regulator-initial-mode 287 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
288 }; 288 };
289 289
290 vreg_l21a_2p95: ldo21 { 290 vreg_l21a_2p95: ldo21 {
291 regulator-min-microvol 291 regulator-min-microvolt = <2704000>;
292 regulator-max-microvol 292 regulator-max-microvolt = <2960000>;
293 regulator-initial-mode 293 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
294 }; 294 };
295 295
296 vreg_l22a_3p3: ldo22 { 296 vreg_l22a_3p3: ldo22 {
297 regulator-min-microvol 297 regulator-min-microvolt = <2864000>;
298 regulator-max-microvol 298 regulator-max-microvolt = <3312000>;
299 regulator-initial-mode 299 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
300 }; 300 };
301 301
302 vreg_l23a_3p3: ldo23 { 302 vreg_l23a_3p3: ldo23 {
303 regulator-min-microvol 303 regulator-min-microvolt = <3000000>;
304 regulator-max-microvol 304 regulator-max-microvolt = <3312000>;
305 regulator-initial-mode 305 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
306 }; 306 };
307 307
308 vreg_l24a_3p075: ldo24 { 308 vreg_l24a_3p075: ldo24 {
309 regulator-min-microvol 309 regulator-min-microvolt = <3088000>;
310 regulator-max-microvol 310 regulator-max-microvolt = <3088000>;
311 regulator-initial-mode 311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
312 }; 312 };
313 313
314 vreg_l25a_3p3: ldo25 { 314 vreg_l25a_3p3: ldo25 {
315 regulator-min-microvol 315 regulator-min-microvolt = <3000000>;
316 regulator-max-microvol 316 regulator-max-microvolt = <3312000>;
317 regulator-initial-mode 317 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
318 regulator-always-on; 318 regulator-always-on;
319 }; 319 };
320 320
321 vdda_mipi_dsi0_1p2: 321 vdda_mipi_dsi0_1p2:
322 vdda_ufs1_1p2: 322 vdda_ufs1_1p2:
323 vreg_l26a_1p2: ldo26 { 323 vreg_l26a_1p2: ldo26 {
324 regulator-min-microvol 324 regulator-min-microvolt = <1200000>;
325 regulator-max-microvol 325 regulator-max-microvolt = <1200000>;
326 regulator-initial-mode 326 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
327 }; 327 };
328 328
329 vreg_l28a_3p0: ldo28 { 329 vreg_l28a_3p0: ldo28 {
330 regulator-min-microvol 330 regulator-min-microvolt = <2856000>;
331 regulator-max-microvol 331 regulator-max-microvolt = <3008000>;
332 regulator-initial-mode 332 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
333 regulator-always-on; 333 regulator-always-on;
334 }; 334 };
335 335
336 vreg_lvs1a_1p8: lvs1 { 336 vreg_lvs1a_1p8: lvs1 {
337 regulator-min-microvol 337 regulator-min-microvolt = <1800000>;
338 regulator-max-microvol 338 regulator-max-microvolt = <1800000>;
339 }; 339 };
340 340
341 vreg_lvs2a_1p8: lvs2 { 341 vreg_lvs2a_1p8: lvs2 {
342 regulator-min-microvol 342 regulator-min-microvolt = <1800000>;
343 regulator-max-microvol 343 regulator-max-microvolt = <1800000>;
344 }; 344 };
345 }; 345 };
346 346
347 regulators-1 { 347 regulators-1 {
348 compatible = "qcom,pmi8998-rpm 348 compatible = "qcom,pmi8998-rpmh-regulators";
349 qcom,pmic-id = "b"; 349 qcom,pmic-id = "b";
350 350
351 vreg_bob: bob { 351 vreg_bob: bob {
352 regulator-min-microvol 352 regulator-min-microvolt = <3312000>;
353 regulator-max-microvol 353 regulator-max-microvolt = <3600000>;
354 regulator-initial-mode 354 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
355 regulator-allow-bypass 355 regulator-allow-bypass;
356 }; 356 };
357 }; 357 };
358 358
359 regulators-2 { 359 regulators-2 {
360 compatible = "qcom,pm8005-rpmh 360 compatible = "qcom,pm8005-rpmh-regulators";
361 qcom,pmic-id = "c"; 361 qcom,pmic-id = "c";
362 362
363 vreg_smp3c_0p6: smps3 { 363 vreg_smp3c_0p6: smps3 {
364 regulator-min-microvol 364 regulator-min-microvolt = <600000>;
365 regulator-max-microvol 365 regulator-max-microvolt = <600000>;
366 regulator-always-on; 366 regulator-always-on;
367 }; 367 };
368 }; 368 };
369 }; 369 };
370 370
371 &cdsp_pas { 371 &cdsp_pas {
372 firmware-name = "qcom/sdm845/polaris/c 372 firmware-name = "qcom/sdm845/polaris/cdsp.mbn";
373 status = "okay"; 373 status = "okay";
374 }; 374 };
375 375
376 &gcc { 376 &gcc {
377 protected-clocks = <GCC_QSPI_CORE_CLK> 377 protected-clocks = <GCC_QSPI_CORE_CLK>,
378 <GCC_QSPI_CORE 378 <GCC_QSPI_CORE_CLK_SRC>,
379 <GCC_QSPI_CNOC 379 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
380 <GCC_LPASS_Q6_ 380 <GCC_LPASS_Q6_AXI_CLK>,
381 <GCC_LPASS_SWA 381 <GCC_LPASS_SWAY_CLK>;
382 }; 382 };
383 383
384 &gmu { 384 &gmu {
385 status = "okay"; 385 status = "okay";
386 }; 386 };
387 387
388 &gpi_dma0 { 388 &gpi_dma0 {
389 status = "okay"; 389 status = "okay";
390 }; 390 };
391 391
392 &gpi_dma1 { 392 &gpi_dma1 {
393 status = "okay"; 393 status = "okay";
394 }; 394 };
395 395
396 &gpu { 396 &gpu {
397 status = "okay"; 397 status = "okay";
398 398
399 zap-shader { 399 zap-shader {
400 memory-region = <&gpu_mem>; 400 memory-region = <&gpu_mem>;
401 firmware-name = "qcom/sdm845/p 401 firmware-name = "qcom/sdm845/polaris/a630_zap.mbn";
402 }; 402 };
403 }; 403 };
404 404
405 &ibb { 405 &ibb {
406 regulator-min-microvolt = <4600000>; 406 regulator-min-microvolt = <4600000>;
407 regulator-max-microvolt = <6000000>; 407 regulator-max-microvolt = <6000000>;
408 regulator-over-current-protection; 408 regulator-over-current-protection;
409 regulator-pull-down; 409 regulator-pull-down;
410 regulator-soft-start; 410 regulator-soft-start;
411 qcom,discharge-resistor-kohms = <300>; 411 qcom,discharge-resistor-kohms = <300>;
412 }; 412 };
413 413
414 &ipa { 414 &ipa {
415 qcom,gsi-loader = "self"; 415 qcom,gsi-loader = "self";
416 memory-region = <&ipa_fw_mem>; 416 memory-region = <&ipa_fw_mem>;
417 firmware-name = "qcom/sdm845/polaris/i 417 firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn";
418 status = "okay"; 418 status = "okay";
419 }; 419 };
420 420
421 &i2c14 { 421 &i2c14 {
422 clock-frequency = <400000>; 422 clock-frequency = <400000>;
423 status = "okay"; 423 status = "okay";
424 424
425 touchscreen@20 { 425 touchscreen@20 {
426 compatible = "syna,rmi4-i2c"; 426 compatible = "syna,rmi4-i2c";
427 reg = <0x20>; 427 reg = <0x20>;
428 #address-cells = <1>; 428 #address-cells = <1>;
429 #size-cells = <0>; 429 #size-cells = <0>;
430 interrupts-extended = <&tlmm 1 430 interrupts-extended = <&tlmm 125 0x2008>;
431 431
432 pinctrl-names = "default", "sl 432 pinctrl-names = "default", "sleep";
433 pinctrl-0 = <&ts_int_default & 433 pinctrl-0 = <&ts_int_default &ts_reset_default>;
434 pinctrl-1 = <&ts_int_sleep &ts 434 pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
435 435
436 vdd-supply = <&vreg_l28a_3p0>; 436 vdd-supply = <&vreg_l28a_3p0>;
437 vio-supply = <&vreg_tp_vddio>; 437 vio-supply = <&vreg_tp_vddio>;
438 438
439 syna,startup-delay-ms = <0xc8> 439 syna,startup-delay-ms = <0xc8>;
440 syna,reset-delay-ms = <0xc8>; 440 syna,reset-delay-ms = <0xc8>;
441 441
442 rmi4-f01@1 { 442 rmi4-f01@1 {
443 syna,nosleep-mode = <0 443 syna,nosleep-mode = <0x1>;
444 reg = <0x1>; 444 reg = <0x1>;
445 }; 445 };
446 446
447 rmi4-f12@12 { 447 rmi4-f12@12 {
448 reg = <0x12>; 448 reg = <0x12>;
449 syna,rezero-wait-ms = 449 syna,rezero-wait-ms = <0xc8>;
450 syna,clip-x-high = <0x 450 syna,clip-x-high = <0x438>;
451 syna,clip-y-high = <0x 451 syna,clip-y-high = <0x870>;
452 syna,sensor-type = <0x 452 syna,sensor-type = <0x1>;
453 syna,clip-x-low = <0x0 453 syna,clip-x-low = <0x0>;
454 syna,clip-y-low = <0x0 454 syna,clip-y-low = <0x0>;
455 }; 455 };
456 }; 456 };
457 }; 457 };
458 458
459 &lab { 459 &lab {
460 regulator-min-microvolt = <4600000>; 460 regulator-min-microvolt = <4600000>;
461 regulator-max-microvolt = <6000000>; 461 regulator-max-microvolt = <6000000>;
462 regulator-soft-start; 462 regulator-soft-start;
463 regulator-pull-down; 463 regulator-pull-down;
464 }; 464 };
465 465
466 &mdss { 466 &mdss {
467 status = "okay"; 467 status = "okay";
468 }; 468 };
469 469
470 &mdss_dsi0 { 470 &mdss_dsi0 {
471 vdda-supply = <&vdda_mipi_dsi0_1p2>; 471 vdda-supply = <&vdda_mipi_dsi0_1p2>;
472 status = "okay"; 472 status = "okay";
473 473
474 display_panel: panel@0 { 474 display_panel: panel@0 {
475 compatible = "jdi,fhd-nt35596s 475 compatible = "jdi,fhd-nt35596s";
476 #address-cells = <1>; 476 #address-cells = <1>;
477 #size-cells = <0>; 477 #size-cells = <0>;
478 reg = <0>; 478 reg = <0>;
479 479
480 reset-gpios = <&tlmm 6 GPIO_AC 480 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
481 vddio-supply = <&vreg_l14a_1p8 481 vddio-supply = <&vreg_l14a_1p8>;
482 backlight = <&pmi8998_wled>; 482 backlight = <&pmi8998_wled>;
483 vddpos-supply = <&lab>; 483 vddpos-supply = <&lab>;
484 vddneg-supply = <&ibb>; 484 vddneg-supply = <&ibb>;
485 485
486 pinctrl-names = "default", "sl 486 pinctrl-names = "default", "sleep";
487 pinctrl-0 = <&sde_dsi_active>; 487 pinctrl-0 = <&sde_dsi_active>;
488 pinctrl-1 = <&sde_dsi_suspend> 488 pinctrl-1 = <&sde_dsi_suspend>;
489 489
490 port { 490 port {
491 panel_in: endpoint { 491 panel_in: endpoint {
492 remote-endpoin 492 remote-endpoint = <&mdss_dsi0_out>;
493 }; 493 };
494 }; 494 };
495 }; 495 };
496 }; 496 };
497 497
498 &mdss_dsi0_out { 498 &mdss_dsi0_out {
499 remote-endpoint = <&panel_in>; 499 remote-endpoint = <&panel_in>;
500 data-lanes = <0 1 2 3>; 500 data-lanes = <0 1 2 3>;
501 }; 501 };
502 502
503 &mdss_dsi0_phy { 503 &mdss_dsi0_phy {
504 vdds-supply = <&vdda_mipi_dsi0_pll>; 504 vdds-supply = <&vdda_mipi_dsi0_pll>;
505 status = "okay"; 505 status = "okay";
506 }; 506 };
507 507
508 &mss_pil { 508 &mss_pil {
509 firmware-name = "qcom/sdm845/polaris/m 509 firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn";
510 status = "okay"; 510 status = "okay";
511 }; 511 };
512 512
513 &pmi8998_wled { 513 &pmi8998_wled {
514 qcom,current-limit-microamp = <20000>; 514 qcom,current-limit-microamp = <20000>;
515 qcom,current-boost-limit = <970>; 515 qcom,current-boost-limit = <970>;
516 qcom,ovp-millivolt = <19600>; 516 qcom,ovp-millivolt = <19600>;
517 qcom,switching-freq = <600>; 517 qcom,switching-freq = <600>;
518 qcom,num-strings = <4>; 518 qcom,num-strings = <4>;
519 qcom,cabc; 519 qcom,cabc;
520 520
521 status = "okay"; 521 status = "okay";
522 }; 522 };
523 523
524 &pm8998_gpios { 524 &pm8998_gpios {
525 volume_up_gpio: pm8998-gpio6-state { 525 volume_up_gpio: pm8998-gpio6-state {
526 pinconf { 526 pinconf {
527 qcom,drive-strength = 527 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
528 function = "normal"; 528 function = "normal";
529 pins = "gpio6"; 529 pins = "gpio6";
530 input-enable; 530 input-enable;
531 bias-pull-up; 531 bias-pull-up;
532 }; 532 };
533 }; 533 };
534 }; 534 };
535 535
536 &pm8998_resin { 536 &pm8998_resin {
537 linux,code = <KEY_VOLUMEDOWN>; 537 linux,code = <KEY_VOLUMEDOWN>;
538 status = "okay"; 538 status = "okay";
539 }; 539 };
540 540
541 &q6afedai { 541 &q6afedai {
542 dai@22 { 542 dai@22 {
543 reg = <QUATERNARY_MI2S_RX>; 543 reg = <QUATERNARY_MI2S_RX>;
544 qcom,sd-lines = <0>; 544 qcom,sd-lines = <0>;
545 }; 545 };
546 }; 546 };
547 547
548 &q6asmdai { 548 &q6asmdai {
549 dai@0 { 549 dai@0 {
550 reg = <0>; 550 reg = <0>;
551 }; 551 };
552 552
553 dai@1 { 553 dai@1 {
554 reg = <1>; 554 reg = <1>;
555 }; 555 };
556 556
557 dai@2 { 557 dai@2 {
558 reg = <2>; 558 reg = <2>;
559 }; 559 };
560 }; 560 };
561 561
562 &qupv3_id_0 { 562 &qupv3_id_0 {
563 status = "okay"; 563 status = "okay";
564 }; 564 };
565 565
566 &qupv3_id_1 { 566 &qupv3_id_1 {
567 status = "okay"; 567 status = "okay";
568 }; 568 };
569 569
570 &qup_i2c14_default { 570 &qup_i2c14_default {
571 drive-strength = <2>; 571 drive-strength = <2>;
572 bias-disable; 572 bias-disable;
573 }; 573 };
574 574
575 &tlmm { 575 &tlmm {
576 gpio-reserved-ranges = <0 4>, <81 4>; 576 gpio-reserved-ranges = <0 4>, <81 4>;
577 577
578 ts_reset_default: ts-reset-default-sta 578 ts_reset_default: ts-reset-default-state {
579 pins = "gpio99"; 579 pins = "gpio99";
580 function = "gpio"; 580 function = "gpio";
581 drive-strength = <16>; 581 drive-strength = <16>;
582 output-high; 582 output-high;
583 }; 583 };
584 584
585 ts_int_default: ts-int-default-state { 585 ts_int_default: ts-int-default-state {
586 pins = "gpio125"; 586 pins = "gpio125";
587 function = "gpio"; 587 function = "gpio";
588 bias-pull-down; 588 bias-pull-down;
589 drive-strength = <16>; 589 drive-strength = <16>;
590 }; 590 };
591 591
592 ts_reset_sleep: ts-reset-sleep-state { 592 ts_reset_sleep: ts-reset-sleep-state {
593 pins = "gpio99"; 593 pins = "gpio99";
594 function = "gpio"; 594 function = "gpio";
595 bias-disable; 595 bias-disable;
596 drive-strength = <2>; 596 drive-strength = <2>;
597 }; 597 };
598 598
599 ts_int_sleep: ts-int-sleep-state { 599 ts_int_sleep: ts-int-sleep-state {
600 pins = "gpio125"; 600 pins = "gpio125";
601 function = "gpio"; 601 function = "gpio";
602 bias-pull-down; 602 bias-pull-down;
603 drive-strength = <2>; 603 drive-strength = <2>;
604 }; 604 };
605 605
606 sde_dsi_active: sde-dsi-active-state { 606 sde_dsi_active: sde-dsi-active-state {
607 pins = "gpio6", "gpio10"; 607 pins = "gpio6", "gpio10";
608 function = "gpio"; 608 function = "gpio";
609 drive-strength = <8>; 609 drive-strength = <8>;
610 bias-disable; 610 bias-disable;
611 }; 611 };
612 612
613 sde_dsi_suspend: sde-dsi-suspend-state 613 sde_dsi_suspend: sde-dsi-suspend-state {
614 pins = "gpio6", "gpio10"; 614 pins = "gpio6", "gpio10";
615 function = "gpio"; 615 function = "gpio";
616 drive-strength = <2>; 616 drive-strength = <2>;
617 bias-pull-down; 617 bias-pull-down;
618 }; 618 };
619 }; 619 };
620 620
621 &uart6 { 621 &uart6 {
622 status = "okay"; 622 status = "okay";
623 623
624 pinctrl-0 = <&qup_uart6_4pin>; 624 pinctrl-0 = <&qup_uart6_4pin>;
625 625
626 bluetooth { 626 bluetooth {
627 compatible = "qcom,wcn3990-bt" 627 compatible = "qcom,wcn3990-bt";
628 628
629 /* This path is relative to th 629 /* This path is relative to the qca/ subdir under lib/firmware. */
630 firmware-name = "polaris/crnv2 630 firmware-name = "polaris/crnv21.bin";
631 631
632 vddio-supply = <&vreg_s4a_1p8> 632 vddio-supply = <&vreg_s4a_1p8>;
633 vddxo-supply = <&vreg_l7a_1p8> 633 vddxo-supply = <&vreg_l7a_1p8>;
634 vddrf-supply = <&vreg_l17a_1p3 634 vddrf-supply = <&vreg_l17a_1p3>;
635 vddch0-supply = <&vreg_l25a_3p 635 vddch0-supply = <&vreg_l25a_3p3>;
636 max-speed = <3200000>; 636 max-speed = <3200000>;
637 }; 637 };
638 }; 638 };
639 639
640 &usb_1 { 640 &usb_1 {
641 /* We'll use this as USB 2.0 only */ 641 /* We'll use this as USB 2.0 only */
642 qcom,select-utmi-as-pipe-clk; 642 qcom,select-utmi-as-pipe-clk;
643 status = "okay"; 643 status = "okay";
644 }; 644 };
645 645
646 &usb_1_dwc3 { 646 &usb_1_dwc3 {
647 dr_mode = "peripheral"; 647 dr_mode = "peripheral";
648 648
649 /* Fastest mode for USB 2 */ 649 /* Fastest mode for USB 2 */
650 maximum-speed = "high-speed"; 650 maximum-speed = "high-speed";
651 651
652 /* Remove USB3 phy */ 652 /* Remove USB3 phy */
653 phys = <&usb_1_hsphy>; 653 phys = <&usb_1_hsphy>;
654 phy-names = "usb2-phy"; 654 phy-names = "usb2-phy";
655 }; 655 };
656 656
657 &usb_1_hsphy { 657 &usb_1_hsphy {
658 vdda-phy-dpdm-supply = <&vreg_l24a_3p0 658 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
659 vdda-pll-supply = <&vreg_l12a_1p8>; 659 vdda-pll-supply = <&vreg_l12a_1p8>;
660 vdd-supply = <&vreg_l1a_0p875>; 660 vdd-supply = <&vreg_l1a_0p875>;
661 661
662 qcom,preemphasis-width = <QUSB2_V2_PRE 662 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
663 qcom,preemphasis-level = <QUSB2_V2_PRE 663 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
664 qcom,hstx-trim-value = <QUSB2_V2_HSTX_ 664 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
665 qcom,imp-res-offset-value = <8>; 665 qcom,imp-res-offset-value = <8>;
666 666
667 status = "okay"; 667 status = "okay";
668 }; 668 };
669 669
670 &usb_1_qmpphy { 670 &usb_1_qmpphy {
671 vdda-pll-supply = <&vreg_l1a_0p875>; 671 vdda-pll-supply = <&vreg_l1a_0p875>;
672 vdda-phy-supply = <&vreg_l26a_1p2>; 672 vdda-phy-supply = <&vreg_l26a_1p2>;
673 status = "okay"; 673 status = "okay";
674 }; 674 };
675 675
676 &ufs_mem_hc { 676 &ufs_mem_hc {
677 reset-gpios = <&tlmm 150 GPIO_ACTIVE_L 677 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
678 vcc-supply = <&vreg_l20a_2p95>; 678 vcc-supply = <&vreg_l20a_2p95>;
679 vcc-max-microamp = <800000>; 679 vcc-max-microamp = <800000>;
680 status = "okay"; 680 status = "okay";
681 }; 681 };
682 682
683 &ufs_mem_phy { 683 &ufs_mem_phy {
684 vdda-phy-supply = <&vdda_ufs1_core>; 684 vdda-phy-supply = <&vdda_ufs1_core>;
685 vdda-pll-supply = <&vdda_ufs1_1p2>; 685 vdda-pll-supply = <&vdda_ufs1_1p2>;
686 status = "okay"; 686 status = "okay";
687 }; 687 };
688 688
689 &venus { 689 &venus {
690 firmware-name = "qcom/sdm845/polaris/v 690 firmware-name = "qcom/sdm845/polaris/venus.mbn";
691 status = "okay"; 691 status = "okay";
692 }; 692 };
693 693
694 &wcd9340 { 694 &wcd9340 {
695 reset-gpios = <&tlmm 64 GPIO_ACTIVE_HI 695 reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
696 vdd-buck-sido-supply = <&vreg_s4a_1p8> 696 vdd-buck-sido-supply = <&vreg_s4a_1p8>;
697 vdd-buck-supply = <&vreg_s4a_1p8>; 697 vdd-buck-supply = <&vreg_s4a_1p8>;
698 vdd-tx-supply = <&vreg_s4a_1p8>; 698 vdd-tx-supply = <&vreg_s4a_1p8>;
699 vdd-rx-supply = <&vreg_s4a_1p8>; 699 vdd-rx-supply = <&vreg_s4a_1p8>;
700 vdd-io-supply = <&vreg_s4a_1p8>; 700 vdd-io-supply = <&vreg_s4a_1p8>;
701 701
702 qcom,micbias1-microvolt = <2700000>; 702 qcom,micbias1-microvolt = <2700000>;
703 qcom,micbias2-microvolt = <1800000>; 703 qcom,micbias2-microvolt = <1800000>;
704 qcom,micbias3-microvolt = <2700000>; 704 qcom,micbias3-microvolt = <2700000>;
705 qcom,micbias4-microvolt = <2700000>; 705 qcom,micbias4-microvolt = <2700000>;
706 }; 706 };
707 707
708 &wifi { 708 &wifi {
709 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8> 709 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
710 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 710 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
711 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 711 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
712 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 712 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
713 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; 713 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
714 status = "okay"; 714 status = "okay";
715 }; 715 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.