1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2021, Konrad Dybcio <konrad.dy 3 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
4 */ 4 */
5 5
6 /dts-v1/; 6 /dts-v1/;
7 7
8 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h <<
10 #include <dt-bindings/regulator/qcom,rpmh-regu 9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
11 #include "sm8150.dtsi" 10 #include "sm8150.dtsi"
12 #include "pm8150.dtsi" 11 #include "pm8150.dtsi"
13 #include "pm8150b.dtsi" 12 #include "pm8150b.dtsi"
14 #include "pm8150l.dtsi" 13 #include "pm8150l.dtsi"
15 14
16 /delete-node/ &cdsp_mem; 15 /delete-node/ &cdsp_mem;
17 /delete-node/ &gpu_mem; 16 /delete-node/ &gpu_mem;
18 /delete-node/ &ipa_fw_mem; 17 /delete-node/ &ipa_fw_mem;
19 /delete-node/ &ipa_gsi_mem; 18 /delete-node/ &ipa_gsi_mem;
20 /delete-node/ &mpss_mem; 19 /delete-node/ &mpss_mem;
21 /delete-node/ &slpi_mem; 20 /delete-node/ &slpi_mem;
22 /delete-node/ &spss_mem; 21 /delete-node/ &spss_mem;
23 /delete-node/ &venus_mem; 22 /delete-node/ &venus_mem;
24 23
25 / { 24 / {
26 qcom,msm-id = <339 0x20000>; /* SM8150 25 qcom,msm-id = <339 0x20000>; /* SM8150 v2 */
27 qcom,board-id = <8 0>; 26 qcom,board-id = <8 0>;
28 27
29 chosen { 28 chosen {
30 #address-cells = <2>; 29 #address-cells = <2>;
31 #size-cells = <2>; 30 #size-cells = <2>;
32 ranges; 31 ranges;
33 32
34 framebuffer: framebuffer@9c000 33 framebuffer: framebuffer@9c000000 {
35 compatible = "simple-f 34 compatible = "simple-framebuffer";
36 reg = <0 0x9c000000 0 35 reg = <0 0x9c000000 0 0x2300000>;
37 /* Griffin BL initiali !! 36 width = <1644>;
38 width = <1096>; !! 37 height = <3840>;
39 height = <2560>; !! 38 stride = <(1644 * 4)>;
40 stride = <(1096 * 4)>; <<
41 format = "a8r8g8b8"; 39 format = "a8r8g8b8";
42 /* 40 /*
43 * That's (going to be 41 * That's (going to be) a lot of clocks, but it's necessary due
44 * to unused clk clean 42 * to unused clk cleanup & no panel driver yet (& no dispcc either)..
45 */ 43 */
46 clocks = <&gcc GCC_DIS 44 clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
47 <&gcc GCC_DIS 45 <&gcc GCC_DISP_SF_AXI_CLK>;
48 }; 46 };
49 }; 47 };
50 48
51 gpio-keys { <<
52 compatible = "gpio-keys"; <<
53 <<
54 pinctrl-names = "default"; <<
55 pinctrl-0 = <&focus_n &snapsho <<
56 <<
57 key-camera-focus { <<
58 label = "Camera Focus" <<
59 linux,code = <KEY_CAME <<
60 gpios = <&pm8150b_gpio <<
61 debounce-interval = <1 <<
62 linux,can-disable; <<
63 wakeup-source; <<
64 }; <<
65 <<
66 key-camera-snapshot { <<
67 label = "Camera Snapsh <<
68 linux,code = <KEY_CAME <<
69 gpios = <&pm8150b_gpio <<
70 debounce-interval = <1 <<
71 linux,can-disable; <<
72 wakeup-source; <<
73 }; <<
74 <<
75 key-vol-down { <<
76 label = "Volume Down"; <<
77 linux,code = <KEY_VOLU <<
78 gpios = <&pm8150_gpios <<
79 debounce-interval = <1 <<
80 linux,can-disable; <<
81 wakeup-source; <<
82 }; <<
83 }; <<
84 <<
85 cam0_vdig_vreg: cam0-vdig-regulator { <<
86 compatible = "regulator-fixed" <<
87 regulator-name = "camera0_vdig <<
88 gpio = <&tlmm 22 GPIO_ACTIVE_H <<
89 enable-active-high; <<
90 <<
91 pinctrl-0 = <&main_cam_pwr_en> <<
92 pinctrl-names = "default"; <<
93 }; <<
94 <<
95 cam1_vdig_vreg: cam1-vdig-regulator { <<
96 compatible = "regulator-fixed" <<
97 regulator-name = "camera1_vdig <<
98 gpio = <&tlmm 79 GPIO_ACTIVE_H <<
99 enable-active-high; <<
100 <<
101 pinctrl-0 = <&sub_cam_pwr_en>; <<
102 pinctrl-names = "default"; <<
103 }; <<
104 <<
105 cam2_vdig_vreg: cam2-vdig-regulator { <<
106 compatible = "regulator-fixed" <<
107 regulator-name = "camera2_vdig <<
108 gpio = <&tlmm 25 GPIO_ACTIVE_H <<
109 enable-active-high; <<
110 <<
111 pinctrl-0 = <&chat_cam_pwr_en> <<
112 pinctrl-names = "default"; <<
113 }; <<
114 <<
115 cam3_vdig_vreg: cam3-vdig-regulator { <<
116 compatible = "regulator-fixed" <<
117 regulator-name = "camera3_vdig <<
118 gpio = <&pm8150_gpios 7 GPIO_A <<
119 enable-active-high; <<
120 <<
121 pinctrl-0 = <&supwc_pwr_en>; <<
122 pinctrl-names = "default"; <<
123 }; <<
124 <<
125 cam_vmdr_vreg: cam-vmdr-regulator { <<
126 compatible = "regulator-fixed" <<
127 regulator-name = "camera_vmdr_ <<
128 gpio = <&pm8150l_gpios 3 GPIO_ <<
129 enable-active-high; <<
130 <<
131 pinctrl-0 = <&main_cam_pwr_vmd <<
132 pinctrl-names = "default"; <<
133 }; <<
134 <<
135 rgbcir_vreg: rgbcir-regulator { <<
136 compatible = "regulator-fixed" <<
137 regulator-name = "rgbcir_vreg" <<
138 gpio = <&tlmm 29 GPIO_ACTIVE_H <<
139 enable-active-high; <<
140 <<
141 pinctrl-0 = <&rgbc_ir_pwr_en>; <<
142 pinctrl-names = "default"; <<
143 }; <<
144 <<
145 vph_pwr: vph-pwr-regulator { 49 vph_pwr: vph-pwr-regulator {
146 compatible = "regulator-fixed" 50 compatible = "regulator-fixed";
147 regulator-name = "vph_pwr"; 51 regulator-name = "vph_pwr";
148 regulator-min-microvolt = <370 52 regulator-min-microvolt = <3700000>;
149 regulator-max-microvolt = <370 53 regulator-max-microvolt = <3700000>;
150 }; 54 };
151 55
152 /* 56 /*
153 * Apparently RPMh does not provide su 57 * Apparently RPMh does not provide support for PM8150 S4 because it
154 * is always-on; model it as a fixed r 58 * is always-on; model it as a fixed regulator.
155 */ 59 */
156 vreg_s4a_1p8: pm8150-s4 { 60 vreg_s4a_1p8: pm8150-s4 {
157 compatible = "regulator-fixed" 61 compatible = "regulator-fixed";
158 regulator-name = "vreg_s4a_1p8 62 regulator-name = "vreg_s4a_1p8";
159 63
160 regulator-min-microvolt = <180 64 regulator-min-microvolt = <1800000>;
161 regulator-max-microvolt = <180 65 regulator-max-microvolt = <1800000>;
162 66
163 regulator-always-on; 67 regulator-always-on;
164 regulator-boot-on; 68 regulator-boot-on;
165 69
166 vin-supply = <&vph_pwr>; 70 vin-supply = <&vph_pwr>;
167 }; 71 };
168 72
169 reserved-memory { 73 reserved-memory {
170 mpss_mem: memory@8dc00000 { 74 mpss_mem: memory@8dc00000 {
171 reg = <0x0 0x8dc00000 75 reg = <0x0 0x8dc00000 0x0 0x9600000>;
172 no-map; 76 no-map;
173 }; 77 };
174 78
175 venus_mem: memory@97200000 { 79 venus_mem: memory@97200000 {
176 reg = <0x0 0x97200000 80 reg = <0x0 0x97200000 0x0 0x500000>;
177 no-map; 81 no-map;
178 }; 82 };
179 83
180 slpi_mem: memory@97700000 { 84 slpi_mem: memory@97700000 {
181 reg = <0x0 0x97700000 85 reg = <0x0 0x97700000 0x0 0x1400000>;
182 no-map; 86 no-map;
183 }; 87 };
184 88
185 ipa_fw_mem: memory@98b00000 { 89 ipa_fw_mem: memory@98b00000 {
186 reg = <0x0 0x98b00000 90 reg = <0x0 0x98b00000 0x0 0x10000>;
187 no-map; 91 no-map;
188 }; 92 };
189 93
190 ipa_gsi_mem: memory@98b10000 { 94 ipa_gsi_mem: memory@98b10000 {
191 reg = <0x0 0x98b10000 95 reg = <0x0 0x98b10000 0x0 0x5000>;
192 no-map; 96 no-map;
193 }; 97 };
194 98
195 gpu_mem: memory@98b15000 { 99 gpu_mem: memory@98b15000 {
196 reg = <0x0 0x98b15000 100 reg = <0x0 0x98b15000 0x0 0x2000>;
197 no-map; 101 no-map;
198 }; 102 };
199 103
200 spss_mem: memory@98c00000 { 104 spss_mem: memory@98c00000 {
201 reg = <0x0 0x98c00000 105 reg = <0x0 0x98c00000 0x0 0x100000>;
202 no-map; 106 no-map;
203 }; 107 };
204 108
205 cdsp_mem: memory@98d00000 { 109 cdsp_mem: memory@98d00000 {
206 reg = <0x0 0x98d00000 110 reg = <0x0 0x98d00000 0x0 0x1400000>;
207 no-map; 111 no-map;
208 }; 112 };
209 113
210 cont_splash_mem: memory@9c0000 114 cont_splash_mem: memory@9c000000 {
211 reg = <0x0 0x9c000000 115 reg = <0x0 0x9c000000 0x0 0x2400000>;
212 no-map; 116 no-map;
213 }; 117 };
214 118
215 cdsp_sec_mem: memory@a4c00000 119 cdsp_sec_mem: memory@a4c00000 {
216 reg = <0x0 0xa4c00000 120 reg = <0x0 0xa4c00000 0x0 0x3c00000>;
217 no-map; 121 no-map;
218 }; 122 };
219 123
220 ramoops@ffc00000 { 124 ramoops@ffc00000 {
221 compatible = "ramoops" 125 compatible = "ramoops";
222 reg = <0x0 0xffc00000 126 reg = <0x0 0xffc00000 0x0 0x100000>;
223 record-size = <0x1000> 127 record-size = <0x1000>;
224 console-size = <0x4000 128 console-size = <0x40000>;
225 pmsg-size = <0x20000>; !! 129 msg-size = <0x20000 0x20000>;
226 ecc-size = <16>; 130 ecc-size = <16>;
227 no-map; 131 no-map;
228 }; 132 };
229 }; 133 };
230 }; 134 };
231 135
232 &adsp_mem { 136 &adsp_mem {
233 reg = <0x0 0x8be00000 0x0 0x1e00000>; 137 reg = <0x0 0x8be00000 0x0 0x1e00000>;
234 }; 138 };
235 139
236 &apps_rsc { 140 &apps_rsc {
237 regulators-0 { !! 141 pm8150-rpmh-regulators {
238 compatible = "qcom,pm8150-rpmh 142 compatible = "qcom,pm8150-rpmh-regulators";
239 qcom,pmic-id = "a"; 143 qcom,pmic-id = "a";
240 144
241 vdd-s1-supply = <&vph_pwr>; 145 vdd-s1-supply = <&vph_pwr>;
242 vdd-s2-supply = <&vph_pwr>; 146 vdd-s2-supply = <&vph_pwr>;
243 vdd-s3-supply = <&vph_pwr>; 147 vdd-s3-supply = <&vph_pwr>;
244 vdd-s4-supply = <&vph_pwr>; 148 vdd-s4-supply = <&vph_pwr>;
245 vdd-s5-supply = <&vph_pwr>; 149 vdd-s5-supply = <&vph_pwr>;
246 vdd-s6-supply = <&vph_pwr>; 150 vdd-s6-supply = <&vph_pwr>;
247 vdd-s7-supply = <&vph_pwr>; 151 vdd-s7-supply = <&vph_pwr>;
248 vdd-s8-supply = <&vph_pwr>; 152 vdd-s8-supply = <&vph_pwr>;
249 vdd-s9-supply = <&vph_pwr>; 153 vdd-s9-supply = <&vph_pwr>;
250 vdd-s10-supply = <&vph_pwr>; 154 vdd-s10-supply = <&vph_pwr>;
251 155
252 vdd-l1-l8-l11-supply = <&vreg_ 156 vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
253 vdd-l2-l10-supply = <&vreg_bob 157 vdd-l2-l10-supply = <&vreg_bob>;
254 vdd-l3-l4-l5-l18-supply = <&vr 158 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
255 vdd-l6-l9-supply = <&vreg_s8c_ 159 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
256 vdd-l7-l12-l14-l15-supply = <& 160 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
257 vdd-l13-l16-l17-supply = <&vre 161 vdd-l13-l16-l17-supply = <&vreg_bob>;
258 162
259 vreg_s2a_0p6: smps2 { 163 vreg_s2a_0p6: smps2 {
260 regulator-min-microvol 164 regulator-min-microvolt = <600000>;
261 regulator-max-microvol 165 regulator-max-microvolt = <600000>;
262 regulator-initial-mode 166 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
263 }; 167 };
264 168
265 vreg_s5a_1p9: smps5 { 169 vreg_s5a_1p9: smps5 {
266 regulator-min-microvol 170 regulator-min-microvolt = <1904000>;
267 regulator-max-microvol 171 regulator-max-microvolt = <2040000>;
268 regulator-initial-mode 172 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
269 }; 173 };
270 174
271 vreg_s6a_0p9: smps6 { 175 vreg_s6a_0p9: smps6 {
272 regulator-min-microvol 176 regulator-min-microvolt = <920000>;
273 regulator-max-microvol 177 regulator-max-microvolt = <1128000>;
274 regulator-initial-mode 178 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
275 }; 179 };
276 180
277 vreg_l1a_0p75: ldo1 { 181 vreg_l1a_0p75: ldo1 {
278 regulator-min-microvol 182 regulator-min-microvolt = <752000>;
279 regulator-max-microvol 183 regulator-max-microvolt = <752000>;
280 regulator-initial-mode 184 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
281 }; 185 };
282 186
283 vreg_l2a_3p1: ldo2 { 187 vreg_l2a_3p1: ldo2 {
284 regulator-min-microvol 188 regulator-min-microvolt = <3072000>;
285 regulator-max-microvol 189 regulator-max-microvolt = <3072000>;
286 regulator-initial-mode 190 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 }; 191 };
288 192
289 vreg_l3a_0p8: ldo3 { 193 vreg_l3a_0p8: ldo3 {
290 regulator-min-microvol 194 regulator-min-microvolt = <480000>;
291 regulator-max-microvol 195 regulator-max-microvolt = <932000>;
292 regulator-initial-mode 196 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
293 }; 197 };
294 198
295 vreg_l5a_0p875: ldo5 { 199 vreg_l5a_0p875: ldo5 {
296 regulator-min-microvol 200 regulator-min-microvolt = <880000>;
297 regulator-max-microvol 201 regulator-max-microvolt = <880000>;
298 regulator-initial-mode 202 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
299 }; 203 };
300 204
301 vreg_l6a_1p2: ldo6 { 205 vreg_l6a_1p2: ldo6 {
302 regulator-min-microvol 206 regulator-min-microvolt = <1200000>;
303 regulator-max-microvol 207 regulator-max-microvolt = <1200000>;
304 regulator-initial-mode 208 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
305 }; 209 };
306 210
307 vreg_l7a_1p8: ldo7 { 211 vreg_l7a_1p8: ldo7 {
308 regulator-min-microvol 212 regulator-min-microvolt = <1800000>;
309 regulator-max-microvol 213 regulator-max-microvolt = <1800000>;
310 regulator-initial-mode 214 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
311 }; 215 };
312 216
313 vreg_l9a_1p2: ldo9 { 217 vreg_l9a_1p2: ldo9 {
314 regulator-min-microvol 218 regulator-min-microvolt = <1200000>;
315 regulator-max-microvol 219 regulator-max-microvolt = <1200000>;
316 regulator-initial-mode 220 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
317 }; 221 };
318 222
319 vreg_l10a_2p5: ldo10 { 223 vreg_l10a_2p5: ldo10 {
320 regulator-min-microvol 224 regulator-min-microvolt = <2504000>;
321 regulator-max-microvol 225 regulator-max-microvolt = <2960000>;
322 regulator-initial-mode 226 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
323 }; 227 };
324 228
325 vreg_l11a_0p8: ldo11 { 229 vreg_l11a_0p8: ldo11 {
326 regulator-min-microvol 230 regulator-min-microvolt = <800000>;
327 regulator-max-microvol 231 regulator-max-microvolt = <800000>;
328 regulator-initial-mode 232 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
329 }; 233 };
330 234
331 vreg_l12a_1p8: ldo12 { 235 vreg_l12a_1p8: ldo12 {
332 regulator-min-microvol 236 regulator-min-microvolt = <1800000>;
333 regulator-max-microvol 237 regulator-max-microvolt = <1800000>;
334 regulator-initial-mode 238 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
335 }; 239 };
336 240
337 /* L13 is unused. */ 241 /* L13 is unused. */
338 242
339 vreg_l14a_1p8: ldo14 { 243 vreg_l14a_1p8: ldo14 {
340 regulator-min-microvol 244 regulator-min-microvolt = <1800000>;
341 regulator-max-microvol 245 regulator-max-microvolt = <1800000>;
342 regulator-initial-mode 246 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
343 }; 247 };
344 248
345 vreg_l15a_1p7: ldo15 { 249 vreg_l15a_1p7: ldo15 {
346 regulator-min-microvol 250 regulator-min-microvolt = <1704000>;
347 regulator-max-microvol 251 regulator-max-microvolt = <1704000>;
348 regulator-initial-mode 252 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
349 }; 253 };
350 254
351 vreg_l16a_2p7: ldo16 { 255 vreg_l16a_2p7: ldo16 {
352 regulator-min-microvol 256 regulator-min-microvolt = <2704000>;
353 regulator-max-microvol 257 regulator-max-microvolt = <2960000>;
354 regulator-initial-mode 258 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
355 }; 259 };
356 260
357 vreg_l17a_3p0: ldo17 { 261 vreg_l17a_3p0: ldo17 {
358 regulator-min-microvol 262 regulator-min-microvolt = <2856000>;
359 regulator-max-microvol 263 regulator-max-microvolt = <3008000>;
360 regulator-initial-mode 264 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
361 }; 265 };
362 266
363 vreg_l18a_0p8: ldo18 { 267 vreg_l18a_0p8: ldo18 {
364 regulator-min-microvol 268 regulator-min-microvolt = <880000>;
365 regulator-max-microvol 269 regulator-max-microvolt = <912000>;
366 regulator-initial-mode 270 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
367 }; 271 };
368 }; 272 };
369 273
370 regulators-1 { !! 274 pm8150l-rpmh-regulators {
371 compatible = "qcom,pm8150l-rpm 275 compatible = "qcom,pm8150l-rpmh-regulators";
372 qcom,pmic-id = "c"; 276 qcom,pmic-id = "c";
373 277
374 vdd-s1-supply = <&vph_pwr>; 278 vdd-s1-supply = <&vph_pwr>;
375 vdd-s2-supply = <&vph_pwr>; 279 vdd-s2-supply = <&vph_pwr>;
376 vdd-s3-supply = <&vph_pwr>; 280 vdd-s3-supply = <&vph_pwr>;
377 vdd-s4-supply = <&vph_pwr>; 281 vdd-s4-supply = <&vph_pwr>;
378 vdd-s5-supply = <&vph_pwr>; 282 vdd-s5-supply = <&vph_pwr>;
379 vdd-s6-supply = <&vph_pwr>; 283 vdd-s6-supply = <&vph_pwr>;
380 vdd-s7-supply = <&vph_pwr>; 284 vdd-s7-supply = <&vph_pwr>;
381 vdd-s8-supply = <&vph_pwr>; 285 vdd-s8-supply = <&vph_pwr>;
382 286
383 vdd-l1-l8-supply = <&vreg_s4a_ 287 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
384 vdd-l2-l3-supply = <&vreg_s8c_ 288 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
385 vdd-l4-l5-l6-supply = <&vreg_b 289 vdd-l4-l5-l6-supply = <&vreg_bob>;
386 vdd-l7-l11-supply = <&vreg_bob 290 vdd-l7-l11-supply = <&vreg_bob>;
387 vdd-l9-l10-supply = <&vreg_bob 291 vdd-l9-l10-supply = <&vreg_bob>;
388 292
389 vdd-bob-supply = <&vph_pwr>; 293 vdd-bob-supply = <&vph_pwr>;
390 vdd-flash-supply = <&vreg_bob> 294 vdd-flash-supply = <&vreg_bob>;
391 vdd-rgb-supply = <&vreg_bob>; 295 vdd-rgb-supply = <&vreg_bob>;
392 296
393 vreg_bob: bob { 297 vreg_bob: bob {
394 regulator-min-microvol 298 regulator-min-microvolt = <3350000>;
395 regulator-max-microvol 299 regulator-max-microvolt = <4000000>;
396 regulator-initial-mode 300 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
397 regulator-allow-bypass 301 regulator-allow-bypass;
398 }; 302 };
399 303
400 vreg_s1c_1p1: smps1 { 304 vreg_s1c_1p1: smps1 {
401 regulator-min-microvol 305 regulator-min-microvolt = <1128000>;
402 regulator-max-microvol 306 regulator-max-microvolt = <1128000>;
403 regulator-initial-mode 307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
404 }; 308 };
405 309
406 vreg_s8c_1p3: smps8 { 310 vreg_s8c_1p3: smps8 {
407 regulator-min-microvol 311 regulator-min-microvolt = <1352000>;
408 regulator-max-microvol 312 regulator-max-microvolt = <1352000>;
409 regulator-initial-mode 313 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
410 }; 314 };
411 315
412 vreg_l1c_1p8: ldo1 { 316 vreg_l1c_1p8: ldo1 {
413 regulator-min-microvol 317 regulator-min-microvolt = <1800000>;
414 regulator-max-microvol 318 regulator-max-microvolt = <1800000>;
415 regulator-initial-mode 319 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
416 }; 320 };
417 321
418 vreg_l2c_1p3: ldo2 { 322 vreg_l2c_1p3: ldo2 {
419 regulator-min-microvol 323 regulator-min-microvolt = <1304000>;
420 regulator-max-microvol 324 regulator-max-microvolt = <1304000>;
421 regulator-initial-mode 325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
422 }; 326 };
423 327
424 vreg_l3c_1p2: ldo3 { 328 vreg_l3c_1p2: ldo3 {
425 regulator-min-microvol 329 regulator-min-microvolt = <1200000>;
426 regulator-max-microvol 330 regulator-max-microvolt = <1200000>;
427 regulator-initial-mode 331 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
428 }; 332 };
429 333
430 vreg_l4c_1p8: ldo4 { 334 vreg_l4c_1p8: ldo4 {
431 regulator-min-microvol 335 regulator-min-microvolt = <1704000>;
432 regulator-max-microvol 336 regulator-max-microvolt = <2928000>;
433 regulator-initial-mode 337 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
434 }; 338 };
435 339
436 vreg_l5c_1p8: ldo5 { 340 vreg_l5c_1p8: ldo5 {
437 regulator-min-microvol 341 regulator-min-microvolt = <1704000>;
438 regulator-max-microvol 342 regulator-max-microvolt = <2928000>;
439 regulator-initial-mode 343 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
440 }; 344 };
441 345
442 vreg_l6c_2p9: ldo6 { 346 vreg_l6c_2p9: ldo6 {
443 regulator-min-microvol 347 regulator-min-microvolt = <1800000>;
444 regulator-max-microvol 348 regulator-max-microvolt = <2960000>;
445 regulator-initial-mode 349 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
446 regulator-allow-set-lo 350 regulator-allow-set-load;
447 regulator-allowed-mode <<
448 <<
449 }; 351 };
450 352
451 vreg_l7c_3p0: ldo7 { 353 vreg_l7c_3p0: ldo7 {
452 regulator-min-microvol 354 regulator-min-microvolt = <2856000>;
453 regulator-max-microvol 355 regulator-max-microvolt = <3104000>;
454 regulator-initial-mode 356 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
455 }; 357 };
456 358
457 vreg_l8c_1p8: ldo8 { 359 vreg_l8c_1p8: ldo8 {
458 regulator-min-microvol 360 regulator-min-microvolt = <1800000>;
459 regulator-max-microvol 361 regulator-max-microvolt = <1800000>;
460 regulator-initial-mode 362 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
461 }; 363 };
462 364
463 vreg_l9c_2p9: ldo9 { 365 vreg_l9c_2p9: ldo9 {
464 regulator-min-microvol 366 regulator-min-microvolt = <2704000>;
465 regulator-max-microvol 367 regulator-max-microvolt = <2960000>;
466 regulator-initial-mode 368 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
467 regulator-allow-set-lo 369 regulator-allow-set-load;
468 regulator-allowed-mode <<
469 <<
470 }; 370 };
471 371
472 vreg_l10c_3p3: ldo10 { 372 vreg_l10c_3p3: ldo10 {
473 regulator-min-microvol 373 regulator-min-microvolt = <3000000>;
474 regulator-max-microvol 374 regulator-max-microvolt = <3312000>;
475 regulator-initial-mode 375 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
476 }; 376 };
477 377
478 vreg_l11c_3p3: ldo11 { 378 vreg_l11c_3p3: ldo11 {
479 regulator-min-microvol 379 regulator-min-microvolt = <3000000>;
480 regulator-max-microvol 380 regulator-max-microvolt = <3312000>;
481 regulator-initial-mode 381 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
482 }; 382 };
483 }; 383 };
484 384
485 /* PM8009 is not present on these boar 385 /* PM8009 is not present on these boards, even if downstream sources suggest so. */
486 }; 386 };
487 387
488 &i2c4 { 388 &i2c4 {
489 status = "okay"; 389 status = "okay";
490 390
491 /* Qcom SMB1355 @ c */ 391 /* Qcom SMB1355 @ c */
492 /* Qcom SMB1390 @ 10 */ 392 /* Qcom SMB1390 @ 10 */
>> 393 /* NXP PN553 NFC @ 28 */
493 /* Qcom FSA4480 USB-C audio switch @ 4 394 /* Qcom FSA4480 USB-C audio switch @ 43 */
494 <<
495 nfc@28 { <<
496 compatible = "nxp,nxp-nci-i2c" <<
497 reg = <0x28>; <<
498 <<
499 interrupt-parent = <&tlmm>; <<
500 interrupts = <47 IRQ_TYPE_EDGE <<
501 <<
502 enable-gpios = <&tlmm 41 GPIO_ <<
503 firmware-gpios = <&tlmm 48 GPI <<
504 }; <<
505 }; 395 };
506 396
507 &i2c7 { 397 &i2c7 {
508 status = "okay"; 398 status = "okay";
509 399
510 /* AMS TCS3490 RGB+IR color sensor @ 7 400 /* AMS TCS3490 RGB+IR color sensor @ 72 */
511 }; 401 };
512 402
513 &i2c10 { 403 &i2c10 {
514 status = "okay"; 404 status = "okay";
515 405
516 /* Samsung touchscreen @ 48 */ 406 /* Samsung touchscreen @ 48 */
517 }; 407 };
518 408
519 &pm8150_gpios { <<
520 gpio-line-names = "VOL_DOWN_N", /* GPI <<
521 "", <<
522 "NC", <<
523 "NC", <<
524 "", <<
525 "NC", <<
526 "SUPWC_PWR_EN", <<
527 "", <<
528 "NC", <<
529 "NC"; /* GPIO_10 */ <<
530 <<
531 vol_down_n: vol-down-n-state { <<
532 pins = "gpio1"; <<
533 function = "normal"; <<
534 power-source = <0>; <<
535 bias-pull-up; <<
536 input-enable; <<
537 }; <<
538 <<
539 supwc_pwr_en: supwc-pwr-en-state { <<
540 pins = "gpio7"; <<
541 function = "normal"; <<
542 qcom,drive-strength = <1>; <<
543 power-source = <1>; <<
544 drive-push-pull; <<
545 output-low; <<
546 }; <<
547 }; <<
548 <<
549 &pm8150b_gpios { <<
550 gpio-line-names = "SNAPSHOT_N", /* GPI <<
551 "FOCUS_N", <<
552 "NC", <<
553 "NC", <<
554 "RF_LCD_ID_EN", <<
555 "NC", <<
556 "TS_VDDH_EN", <<
557 "LCD_ID", <<
558 "", <<
559 "NC", /* GPIO_10 */ <<
560 "NC", <<
561 "RF_ID"; <<
562 <<
563 snapshot_n: snapshot-n-state { <<
564 pins = "gpio1"; <<
565 function = "normal"; <<
566 power-source = <0>; <<
567 bias-pull-up; <<
568 input-enable; <<
569 }; <<
570 <<
571 focus_n: focus-n-state { <<
572 pins = "gpio2"; <<
573 function = "normal"; <<
574 power-source = <0>; <<
575 bias-pull-up; <<
576 input-enable; <<
577 }; <<
578 }; <<
579 <<
580 &pm8150l_gpios { <<
581 gpio-line-names = "TS_VDDIO_EN", /* GP <<
582 "NC", <<
583 "MAIN_CAM_PWR_VMDR_E <<
584 "NC", <<
585 "", <<
586 "NC", <<
587 "NC", <<
588 "FP_LDO_EN", <<
589 "NC", <<
590 "NC", /* GPIO_10 */ <<
591 "NC", <<
592 "NC"; <<
593 <<
594 main_cam_pwr_vmdr_en: main-cam-pwr-vmd <<
595 pins = "gpio3"; <<
596 function = "normal"; <<
597 qcom,drive-strength = <PMIC_GP <<
598 power-source = <0>; <<
599 drive-push-pull; <<
600 output-low; <<
601 }; <<
602 }; <<
603 <<
604 &pon_pwrkey { 409 &pon_pwrkey {
605 status = "okay"; 410 status = "okay";
606 }; 411 };
607 412
608 &pon_resin { <<
609 linux,code = <KEY_VOLUMEUP>; <<
610 status = "okay"; <<
611 }; <<
612 <<
613 &qupv3_id_0 { 413 &qupv3_id_0 {
614 status = "okay"; 414 status = "okay";
615 }; 415 };
616 416
617 &qupv3_id_1 { 417 &qupv3_id_1 {
618 status = "okay"; 418 status = "okay";
619 }; 419 };
620 420
621 &sdhc_2 { <<
622 vmmc-supply = <&vreg_l9c_2p9>; <<
623 vqmmc-supply = <&vreg_l6c_2p9>; <<
624 cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH> <<
625 bus-width = <4>; <<
626 no-sdio; <<
627 no-mmc; <<
628 <<
629 status = "okay"; <<
630 }; <<
631 <<
632 &tlmm { 421 &tlmm {
633 gpio-reserved-ranges = <126 4>; 422 gpio-reserved-ranges = <126 4>;
634 gpio-line-names = "NFC_ESE_SPI_MISO", <<
635 "NFC_ESE_SPI_MOSI", <<
636 "NFC_ESE_SPI_SCLK", <<
637 "NFC_ESE_SPI_CS_N", <<
638 "NC", <<
639 "NC", <<
640 "DISP_RESET_N", <<
641 "DEBUG_GPIO0", <<
642 "MDP_VSYNC_P", <<
643 "TS_I2C_SDA", <<
644 "TS_I2C_SCL", /* GPI <<
645 "CAM_SOF", <<
646 "CAM2_RST_N", <<
647 "CAM_MCLK0", <<
648 "CAM_MCLK1", <<
649 "CAM_MCLK2", <<
650 "CAM_MCLK3", <<
651 "CCI_I2C_SDA0", <<
652 "CCI_I2C_SCL0", <<
653 "CCI_I2C_SDA1", <<
654 "CCI_I2C_SCL1", /* G <<
655 "NC", <<
656 "MAIN_CAM_PWR_EN", <<
657 "CAM3_RST_N", <<
658 "NC", <<
659 "CHAT_CAM_PWR_EN", <<
660 "NC", <<
661 "NC", <<
662 "CAM0_RST_N", <<
663 "RGBC_IR_PWR_EN", <<
664 "CAM1_RST_N", /* GPI <<
665 "CCI_I2C_SDA2", <<
666 "CCI_I2C_SCL2", <<
667 "CCI_I2C_SDA3", <<
668 "CCI_I2C_SCL3", <<
669 "NC", <<
670 "DEBUG_GPIO1", <<
671 "RGBC_IR_INT", <<
672 "USB_CC_DIR", <<
673 "NC", <<
674 "NC", /* GPIO_40 */ <<
675 "NFC_EN", <<
676 "NFC_ESE_PWR_REQ", <<
677 "BT_HCI_UART_CTS_N", <<
678 "BT_HCI_UART_RFR_N", <<
679 "BT_HCI_UART_TXD", <<
680 "BT_HCI_UART_RXD", <<
681 "NFC_IRQ", <<
682 "NFC_DWL_REQ", <<
683 "UIM2_DETECT_EN", <<
684 "WLAN_SW_CTRL", /* G <<
685 "APPS_I2C_SDA", <<
686 "APPS_I2C_SCL", <<
687 "NC", <<
688 "TS_RESET_N", <<
689 "NC", <<
690 "NC", <<
691 "NC", <<
692 "NC", <<
693 "HW_ID_0", <<
694 "NC", /* GPIO_60 */ <<
695 "QLINK_REQUEST", <<
696 "QLINK_ENABLE", <<
697 "WMSS_RESET_N", <<
698 "SDM_GRFC_8", <<
699 "WDOG_DISABLE", <<
700 "NC", <<
701 "NC", <<
702 "PA_INDICATOR_OR", <<
703 "MSS_LTE_COXM_TXD", <<
704 "MSS_LTE_COXM_RXD", <<
705 "SDM_RFFE0_DATA", <<
706 "SDM_RFFE0_CLK", <<
707 "SDM_RFFE1_DATA", <<
708 "SDM_RFFE1_CLK", <<
709 "SDM_RFFE2_DATA", <<
710 "SDM_RFFE2_CLK", <<
711 "SDM_RFFE3_DATA", <<
712 "SDM_RFFE3_CLK", <<
713 "SUB_CAM_PWR_EN", <<
714 "FP_RESET_N", /* GPI <<
715 "NC", <<
716 "NC", <<
717 "NC", <<
718 "NC", <<
719 "DEBUG_UART_TX", <<
720 "DEBUG_UART_RX", <<
721 "DVDT_WRT_DET_AND", <<
722 "NC", <<
723 "NC", <<
724 "NC", /* GPIO_90 */ <<
725 "NC", <<
726 "NC", <<
727 "NC", <<
728 "NC", <<
729 "UDON_SWITCH_SEL", <<
730 "SD_CARD_DET_N", <<
731 "NC", <<
732 "CAMSENSOR_I2C_SDA", <<
733 "CAMSENSOR_I2C_SCL", <<
734 "USB_AUDIO_EN1", /* <<
735 "DISP_ERR_FG", <<
736 "NC", <<
737 "NC", <<
738 "NC", <<
739 "UIM2_DATA", <<
740 "UIM2_CLK", <<
741 "UIM2_RESET", <<
742 "UIM2_DET", <<
743 "UIM1_DATA", <<
744 "UIM1_CLK", /* GPIO_ <<
745 "UIM1_RESET", <<
746 "UIM1_PRESENT", <<
747 "NFC_CLK_REQ", <<
748 "SW_SERVICE", <<
749 "NC", <<
750 "RF_ID_EXTENSION", <<
751 "ALS_PROX_INT_N", <<
752 "FP_INT", <<
753 "DVDT_WRT_DET_OR", <<
754 "BAROMETER_INT", /* <<
755 "ACC_COVER_OPEN", <<
756 "TS_INT_N", <<
757 "CODEC_INT1_N", <<
758 "CODEC_INT2_N", <<
759 "TX_GTR_THRES_IN", <<
760 "FP_SPI_MISO", <<
761 "FP_SPI_MOSI", <<
762 "FP_SPI_SCLK", <<
763 "FP_SPI_CS_N", <<
764 "NC", /* GPIO_130 */ <<
765 "DVDT_ENABLE", <<
766 "ACCEL_INT", <<
767 "NC", <<
768 "MAG_INT_N", <<
769 "NC", <<
770 "FORCED_USB_BOOT", <<
771 "NC", <<
772 "NC", <<
773 "HW_ID_1", <<
774 "NC", /* GPIO_140 */ <<
775 "NC", <<
776 "NC", <<
777 "CODEC_RST_N", <<
778 "CDC_SPI_MISO", <<
779 "CDC_SPI_MOSI", <<
780 "CDC_SPI_SCLK", <<
781 "CDC_SPI_CS_N", <<
782 "NC", <<
783 "LPASS_SLIMBUS_CLK", <<
784 "LPASS_SLIMBUS_DATA0 <<
785 "LPASS_SLIMBUS_DATA1 <<
786 "USB_AUDIO_EN2", <<
787 "BT_FM_SLIMBUS_DATA" <<
788 "BT_FM_SLIMBUS_CLK", <<
789 "COMPASS_I2C_SDA", <<
790 "COMPASS_I2C_SCL", <<
791 "SSC_SPI_1_MISO", <<
792 "SSC_SPI_1_MOSI", <<
793 "SSC_SPI_1_CLK", <<
794 "SSC_SPI_1_CS_N", /* <<
795 "SSC_SENSOR_I2C_SDA" <<
796 "SSC_SENSOR_I2C_SCL" <<
797 "NC", <<
798 "NC", <<
799 "NC", <<
800 "NC", <<
801 "SSC_UART_1_TX", <<
802 "SSC_UART_1_RX", <<
803 "WL_CMD_CLK_CHAIN0", <<
804 "WL_CMD_DATA_CHAIN0" <<
805 "WL_CMD_CLK_CHAIN1", <<
806 "WL_CMD_DATA_CHAIN1" <<
807 "WL_BT_COEX_CLK", <<
808 "WL_BT_COEX_DATA"; <<
809 <<
810 main_cam_pwr_en: main-cam-pwr-en-state <<
811 pins = "gpio22"; <<
812 function = "gpio"; <<
813 drive-strength = <2>; <<
814 bias-disable; <<
815 output-low; <<
816 }; <<
817 <<
818 chat_cam_pwr_en: chat-cam-pwr-en-state <<
819 pins = "gpio25"; <<
820 function = "gpio"; <<
821 drive-strength = <2>; <<
822 bias-disable; <<
823 output-low; <<
824 }; <<
825 <<
826 rgbc_ir_pwr_en: rgbc-ir-pwr-en-state { <<
827 pins = "gpio29"; <<
828 function = "gpio"; <<
829 drive-strength = <2>; <<
830 bias-disable; <<
831 output-low; <<
832 }; <<
833 <<
834 sub_cam_pwr_en: sub-cam-pwr-en-state { <<
835 pins = "gpio79"; <<
836 function = "gpio"; <<
837 drive-strength = <2>; <<
838 bias-pull-down; <<
839 }; <<
840 }; 423 };
841 424
842 &uart2 { 425 &uart2 {
843 status = "okay"; 426 status = "okay";
844 }; 427 };
845 428
846 /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE 429 /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
847 &ufs_mem_hc { status = "disabled"; }; 430 &ufs_mem_hc { status = "disabled"; };
848 &ufs_mem_phy { status = "disabled"; }; 431 &ufs_mem_phy { status = "disabled"; };
849 432
850 &usb_1 { 433 &usb_1 {
851 status = "okay"; 434 status = "okay";
852 }; 435 };
853 436
854 &usb_1_dwc3 { 437 &usb_1_dwc3 {
855 dr_mode = "peripheral"; 438 dr_mode = "peripheral";
856 }; 439 };
857 440
858 &usb_1_hsphy { 441 &usb_1_hsphy {
859 status = "okay"; 442 status = "okay";
860 vdda-pll-supply = <&vreg_l5a_0p875>; 443 vdda-pll-supply = <&vreg_l5a_0p875>;
861 vdda33-supply = <&vreg_l2a_3p1>; 444 vdda33-supply = <&vreg_l2a_3p1>;
862 vdda18-supply = <&vreg_l12a_1p8>; 445 vdda18-supply = <&vreg_l12a_1p8>;
863 }; 446 };
864 447
865 &usb_1_qmpphy { 448 &usb_1_qmpphy {
866 status = "okay"; 449 status = "okay";
867 vdda-phy-supply = <&vreg_l3c_1p2>; 450 vdda-phy-supply = <&vreg_l3c_1p2>;
868 vdda-pll-supply = <&vreg_l18a_0p8>; 451 vdda-pll-supply = <&vreg_l18a_0p8>;
869 }; 452 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.