1 // SPDX-License-Identifier: BSD-3-Clause 1 // SPDX-License-Identifier: BSD-3-Clause
2 /* 2 /*
3 * Copyright (c) 2020-2021, Linaro Limited 3 * Copyright (c) 2020-2021, Linaro Limited
4 */ 4 */
5 5
6 /dts-v1/; 6 /dts-v1/;
7 7
8 #include <dt-bindings/regulator/qcom,rpmh-regu 8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include "sm8350.dtsi" 9 #include "sm8350.dtsi"
10 #include "pm8350.dtsi" 10 #include "pm8350.dtsi"
11 #include "pm8350b.dtsi" 11 #include "pm8350b.dtsi"
12 #include "pm8350c.dtsi" 12 #include "pm8350c.dtsi"
13 #include "pmk8350.dtsi" 13 #include "pmk8350.dtsi"
14 #include "pmr735a.dtsi" 14 #include "pmr735a.dtsi"
15 #include "pmr735b.dtsi" 15 #include "pmr735b.dtsi"
16 16
17 / { 17 / {
18 model = "Qualcomm Technologies, Inc. S 18 model = "Qualcomm Technologies, Inc. SM8350 HDK";
19 compatible = "qcom,sm8350-hdk", "qcom, 19 compatible = "qcom,sm8350-hdk", "qcom,sm8350";
20 chassis-type = "embedded"; 20 chassis-type = "embedded";
21 21
22 aliases { 22 aliases {
23 serial0 = &uart2; 23 serial0 = &uart2;
24 }; 24 };
25 25
26 chosen { 26 chosen {
27 stdout-path = "serial0:115200n 27 stdout-path = "serial0:115200n8";
28 }; 28 };
29 29
30 hdmi-connector { 30 hdmi-connector {
31 compatible = "hdmi-connector"; 31 compatible = "hdmi-connector";
32 type = "a"; 32 type = "a";
33 33
34 port { 34 port {
35 hdmi_con: endpoint { 35 hdmi_con: endpoint {
36 remote-endpoin 36 remote-endpoint = <<9611_out>;
37 }; 37 };
38 }; 38 };
39 }; 39 };
40 40
41 pmic-glink { 41 pmic-glink {
42 compatible = "qcom,sm8350-pmic 42 compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink";
43 #address-cells = <1>; 43 #address-cells = <1>;
44 #size-cells = <0>; 44 #size-cells = <0>;
45 orientation-gpios = <&tlmm 81 <<
46 45
47 connector@0 { 46 connector@0 {
48 compatible = "usb-c-co 47 compatible = "usb-c-connector";
49 reg = <0>; 48 reg = <0>;
50 power-role = "dual"; 49 power-role = "dual";
51 data-role = "dual"; 50 data-role = "dual";
52 51
53 ports { 52 ports {
54 #address-cells 53 #address-cells = <1>;
55 #size-cells = 54 #size-cells = <0>;
56 55
57 port@0 { 56 port@0 {
58 reg = 57 reg = <0>;
59 58
60 pmic_g 59 pmic_glink_hs_in: endpoint {
61 60 remote-endpoint = <&usb_1_dwc3_hs>;
62 }; 61 };
63 }; 62 };
64 63
65 port@1 { 64 port@1 {
66 reg = 65 reg = <1>;
67 66
68 pmic_g 67 pmic_glink_ss_in: endpoint {
69 68 remote-endpoint = <&usb_1_qmpphy_out>;
70 }; 69 };
71 }; 70 };
72 71
73 port@2 { 72 port@2 {
74 reg = 73 reg = <2>;
75 74
76 pmic_g 75 pmic_glink_sbu: endpoint {
77 76 remote-endpoint = <&fsa4480_sbu_mux>;
78 }; 77 };
79 }; 78 };
80 }; 79 };
81 }; 80 };
82 }; 81 };
83 82
84 vph_pwr: vph-pwr-regulator { 83 vph_pwr: vph-pwr-regulator {
85 compatible = "regulator-fixed" 84 compatible = "regulator-fixed";
86 regulator-name = "vph_pwr"; 85 regulator-name = "vph_pwr";
87 regulator-min-microvolt = <370 86 regulator-min-microvolt = <3700000>;
88 regulator-max-microvolt = <370 87 regulator-max-microvolt = <3700000>;
89 88
90 regulator-always-on; 89 regulator-always-on;
91 regulator-boot-on; 90 regulator-boot-on;
92 }; 91 };
93 92
94 lt9611_1v2: lt9611-1v2-regulator { 93 lt9611_1v2: lt9611-1v2-regulator {
95 compatible = "regulator-fixed" 94 compatible = "regulator-fixed";
96 regulator-name = "LT9611_1V2"; 95 regulator-name = "LT9611_1V2";
97 96
98 vin-supply = <&vph_pwr>; 97 vin-supply = <&vph_pwr>;
99 regulator-min-microvolt = <120 98 regulator-min-microvolt = <1200000>;
100 regulator-max-microvolt = <120 99 regulator-max-microvolt = <1200000>;
101 gpio = <&tlmm 49 GPIO_ACTIVE_H 100 gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>;
102 enable-active-high; 101 enable-active-high;
103 regulator-boot-on; 102 regulator-boot-on;
104 }; 103 };
105 104
106 lt9611_3v3: lt9611-3v3-regulator { 105 lt9611_3v3: lt9611-3v3-regulator {
107 compatible = "regulator-fixed" 106 compatible = "regulator-fixed";
108 regulator-name = "LT9611_3V3"; 107 regulator-name = "LT9611_3V3";
109 108
110 vin-supply = <&vreg_bob>; 109 vin-supply = <&vreg_bob>;
111 gpio = <&tlmm 47 GPIO_ACTIVE_H 110 gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
112 regulator-min-microvolt = <330 111 regulator-min-microvolt = <3300000>;
113 regulator-max-microvolt = <330 112 regulator-max-microvolt = <3300000>;
114 enable-active-high; 113 enable-active-high;
115 regulator-boot-on; 114 regulator-boot-on;
116 regulator-always-on; 115 regulator-always-on;
117 }; 116 };
118 }; 117 };
119 118
120 &adsp { 119 &adsp {
121 status = "okay"; 120 status = "okay";
122 firmware-name = "qcom/sm8350/adsp.mbn" 121 firmware-name = "qcom/sm8350/adsp.mbn";
123 }; 122 };
124 123
125 &apps_rsc { 124 &apps_rsc {
126 regulators-0 { 125 regulators-0 {
127 compatible = "qcom,pm8350-rpmh 126 compatible = "qcom,pm8350-rpmh-regulators";
128 qcom,pmic-id = "b"; 127 qcom,pmic-id = "b";
129 128
130 vdd-s1-supply = <&vph_pwr>; 129 vdd-s1-supply = <&vph_pwr>;
131 vdd-s2-supply = <&vph_pwr>; 130 vdd-s2-supply = <&vph_pwr>;
132 vdd-s3-supply = <&vph_pwr>; 131 vdd-s3-supply = <&vph_pwr>;
133 vdd-s4-supply = <&vph_pwr>; 132 vdd-s4-supply = <&vph_pwr>;
134 vdd-s5-supply = <&vph_pwr>; 133 vdd-s5-supply = <&vph_pwr>;
135 vdd-s6-supply = <&vph_pwr>; 134 vdd-s6-supply = <&vph_pwr>;
136 vdd-s7-supply = <&vph_pwr>; 135 vdd-s7-supply = <&vph_pwr>;
137 vdd-s8-supply = <&vph_pwr>; 136 vdd-s8-supply = <&vph_pwr>;
138 vdd-s9-supply = <&vph_pwr>; 137 vdd-s9-supply = <&vph_pwr>;
139 vdd-s10-supply = <&vph_pwr>; 138 vdd-s10-supply = <&vph_pwr>;
140 vdd-s11-supply = <&vph_pwr>; 139 vdd-s11-supply = <&vph_pwr>;
141 vdd-s12-supply = <&vph_pwr>; 140 vdd-s12-supply = <&vph_pwr>;
142 141
143 vdd-l1-l4-supply = <&vreg_s11b 142 vdd-l1-l4-supply = <&vreg_s11b_0p95>;
144 vdd-l2-l7-supply = <&vreg_bob> 143 vdd-l2-l7-supply = <&vreg_bob>;
145 vdd-l3-l5-supply = <&vreg_bob> 144 vdd-l3-l5-supply = <&vreg_bob>;
146 vdd-l6-l9-l10-supply = <&vreg_ 145 vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
147 146
148 vreg_s10b_1p8: smps10 { 147 vreg_s10b_1p8: smps10 {
149 regulator-name = "vreg 148 regulator-name = "vreg_s10b_1p8";
150 regulator-min-microvol 149 regulator-min-microvolt = <1800000>;
151 regulator-max-microvol 150 regulator-max-microvolt = <1800000>;
152 regulator-initial-mode 151 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
153 }; 152 };
154 153
155 vreg_s11b_0p95: smps11 { 154 vreg_s11b_0p95: smps11 {
156 regulator-name = "vreg 155 regulator-name = "vreg_s11b_0p95";
157 regulator-min-microvol 156 regulator-min-microvolt = <952000>;
158 regulator-max-microvol 157 regulator-max-microvolt = <952000>;
159 regulator-initial-mode 158 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
160 }; 159 };
161 160
162 vreg_s12b_1p25: smps12 { 161 vreg_s12b_1p25: smps12 {
163 regulator-name = "vreg 162 regulator-name = "vreg_s12b_1p25";
164 regulator-min-microvol 163 regulator-min-microvolt = <1256000>;
165 regulator-max-microvol 164 regulator-max-microvolt = <1256000>;
166 regulator-initial-mode 165 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
167 }; 166 };
168 167
169 vreg_l1b_0p88: ldo1 { 168 vreg_l1b_0p88: ldo1 {
170 regulator-name = "vreg 169 regulator-name = "vreg_l1b_0p88";
171 regulator-min-microvol 170 regulator-min-microvolt = <912000>;
172 regulator-max-microvol 171 regulator-max-microvolt = <920000>;
173 regulator-initial-mode 172 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
174 }; 173 };
175 174
176 vreg_l2b_3p07: ldo2 { 175 vreg_l2b_3p07: ldo2 {
177 regulator-name = "vreg 176 regulator-name = "vreg_l2b_3p07";
178 regulator-min-microvol 177 regulator-min-microvolt = <3072000>;
179 regulator-max-microvol 178 regulator-max-microvolt = <3072000>;
180 regulator-initial-mode 179 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
181 }; 180 };
182 181
183 vreg_l3b_0p9: ldo3 { 182 vreg_l3b_0p9: ldo3 {
184 regulator-name = "vreg 183 regulator-name = "vreg_l3b_0p9";
185 regulator-min-microvol 184 regulator-min-microvolt = <904000>;
186 regulator-max-microvol 185 regulator-max-microvolt = <904000>;
187 regulator-initial-mode 186 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
188 }; 187 };
189 188
190 vreg_l5b_0p88: ldo5 { 189 vreg_l5b_0p88: ldo5 {
191 regulator-name = "vreg 190 regulator-name = "vreg_l5b_0p88";
192 regulator-min-microvol 191 regulator-min-microvolt = <880000>;
193 regulator-max-microvol 192 regulator-max-microvolt = <888000>;
194 regulator-initial-mode 193 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
195 regulator-allow-set-lo 194 regulator-allow-set-load;
196 regulator-allowed-mode 195 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
197 196 RPMH_REGULATOR_MODE_HPM>;
198 }; 197 };
199 198
200 vreg_l6b_1p2: ldo6 { 199 vreg_l6b_1p2: ldo6 {
201 regulator-name = "vreg 200 regulator-name = "vreg_l6b_1p2";
202 regulator-min-microvol 201 regulator-min-microvolt = <1200000>;
203 regulator-max-microvol 202 regulator-max-microvolt = <1208000>;
204 regulator-initial-mode 203 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
205 regulator-allow-set-lo 204 regulator-allow-set-load;
206 regulator-allowed-mode 205 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
207 206 RPMH_REGULATOR_MODE_HPM>;
208 }; 207 };
209 208
210 vreg_l7b_2p96: ldo7 { 209 vreg_l7b_2p96: ldo7 {
211 regulator-name = "vreg 210 regulator-name = "vreg_l7b_2p96";
212 regulator-min-microvol 211 regulator-min-microvolt = <2504000>;
213 regulator-max-microvol 212 regulator-max-microvolt = <2504000>;
214 regulator-initial-mode 213 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
215 regulator-allow-set-lo 214 regulator-allow-set-load;
216 regulator-allowed-mode 215 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
217 216 RPMH_REGULATOR_MODE_HPM>;
218 }; 217 };
219 218
220 vreg_l9b_1p2: ldo9 { 219 vreg_l9b_1p2: ldo9 {
221 regulator-name = "vreg 220 regulator-name = "vreg_l9b_1p2";
222 regulator-min-microvol 221 regulator-min-microvolt = <1200000>;
223 regulator-max-microvol 222 regulator-max-microvolt = <1200000>;
224 regulator-initial-mode 223 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
225 regulator-allow-set-lo 224 regulator-allow-set-load;
226 regulator-allowed-mode 225 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
227 226 RPMH_REGULATOR_MODE_HPM>;
228 }; 227 };
229 }; 228 };
230 229
231 regulators-1 { 230 regulators-1 {
232 compatible = "qcom,pm8350c-rpm 231 compatible = "qcom,pm8350c-rpmh-regulators";
233 qcom,pmic-id = "c"; 232 qcom,pmic-id = "c";
234 233
235 vdd-s1-supply = <&vph_pwr>; 234 vdd-s1-supply = <&vph_pwr>;
236 vdd-s2-supply = <&vph_pwr>; 235 vdd-s2-supply = <&vph_pwr>;
237 vdd-s3-supply = <&vph_pwr>; 236 vdd-s3-supply = <&vph_pwr>;
238 vdd-s4-supply = <&vph_pwr>; 237 vdd-s4-supply = <&vph_pwr>;
239 vdd-s5-supply = <&vph_pwr>; 238 vdd-s5-supply = <&vph_pwr>;
240 vdd-s6-supply = <&vph_pwr>; 239 vdd-s6-supply = <&vph_pwr>;
241 vdd-s7-supply = <&vph_pwr>; 240 vdd-s7-supply = <&vph_pwr>;
242 vdd-s8-supply = <&vph_pwr>; 241 vdd-s8-supply = <&vph_pwr>;
243 vdd-s9-supply = <&vph_pwr>; 242 vdd-s9-supply = <&vph_pwr>;
244 vdd-s10-supply = <&vph_pwr>; 243 vdd-s10-supply = <&vph_pwr>;
245 244
246 vdd-l1-l12-supply = <&vreg_s1c 245 vdd-l1-l12-supply = <&vreg_s1c_1p86>;
247 vdd-l2-l8-supply = <&vreg_s1c_ 246 vdd-l2-l8-supply = <&vreg_s1c_1p86>;
248 vdd-l3-l4-l5-l7-l13-supply = < 247 vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
249 vdd-l6-l9-l11-supply = <&vreg_ 248 vdd-l6-l9-l11-supply = <&vreg_bob>;
250 vdd-l10-supply = <&vreg_s12b_1 249 vdd-l10-supply = <&vreg_s12b_1p25>;
251 250
252 vdd-bob-supply = <&vph_pwr>; 251 vdd-bob-supply = <&vph_pwr>;
253 252
254 vreg_s1c_1p86: smps1 { 253 vreg_s1c_1p86: smps1 {
255 regulator-name = "vreg 254 regulator-name = "vreg_s1c_1p86";
256 regulator-min-microvol 255 regulator-min-microvolt = <1856000>;
257 regulator-max-microvol 256 regulator-max-microvolt = <1880000>;
258 regulator-initial-mode 257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
259 }; 258 };
260 259
261 vreg_bob: bob { 260 vreg_bob: bob {
262 regulator-name = "vreg 261 regulator-name = "vreg_bob";
263 regulator-min-microvol 262 regulator-min-microvolt = <3008000>;
264 regulator-max-microvol 263 regulator-max-microvolt = <3960000>;
265 regulator-initial-mode 264 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
266 }; 265 };
267 266
268 vreg_l1c_1p8: ldo1 { 267 vreg_l1c_1p8: ldo1 {
269 regulator-name = "vreg 268 regulator-name = "vreg_l1c_1p8";
270 regulator-min-microvol 269 regulator-min-microvolt = <1800000>;
271 regulator-max-microvol 270 regulator-max-microvolt = <1800000>;
272 regulator-initial-mode 271 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
273 }; 272 };
274 273
275 vreg_l2c_1p8: ldo2 { 274 vreg_l2c_1p8: ldo2 {
276 regulator-name = "vreg 275 regulator-name = "vreg_l2c_1p8";
277 regulator-min-microvol 276 regulator-min-microvolt = <1800000>;
278 regulator-max-microvol 277 regulator-max-microvolt = <1800000>;
279 regulator-initial-mode 278 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
280 }; 279 };
281 280
282 vreg_l6c_1p8: ldo6 { 281 vreg_l6c_1p8: ldo6 {
283 regulator-name = "vreg 282 regulator-name = "vreg_l6c_1p8";
284 regulator-min-microvol 283 regulator-min-microvolt = <1800000>;
285 regulator-max-microvol 284 regulator-max-microvolt = <2960000>;
286 regulator-initial-mode 285 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 }; 286 };
288 287
289 vreg_l9c_2p96: ldo9 { 288 vreg_l9c_2p96: ldo9 {
290 regulator-name = "vreg 289 regulator-name = "vreg_l9c_2p96";
291 regulator-min-microvol 290 regulator-min-microvolt = <2960000>;
292 regulator-max-microvol 291 regulator-max-microvolt = <3008000>;
293 regulator-initial-mode 292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
294 }; 293 };
295 294
296 vreg_l10c_1p2: ldo10 { 295 vreg_l10c_1p2: ldo10 {
297 regulator-name = "vreg 296 regulator-name = "vreg_l10c_1p2";
298 regulator-min-microvol 297 regulator-min-microvolt = <1200000>;
299 regulator-max-microvol 298 regulator-max-microvolt = <1200000>;
300 regulator-initial-mode 299 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 }; 300 };
302 }; 301 };
303 302
304 regulators-2 { 303 regulators-2 {
305 compatible = "qcom,pmr735a-rpm 304 compatible = "qcom,pmr735a-rpmh-regulators";
306 qcom,pmic-id = "e"; 305 qcom,pmic-id = "e";
307 306
308 vdd-s1-supply = <&vph_pwr>; 307 vdd-s1-supply = <&vph_pwr>;
309 vdd-s2-supply = <&vph_pwr>; 308 vdd-s2-supply = <&vph_pwr>;
310 vdd-s3-supply = <&vph_pwr>; 309 vdd-s3-supply = <&vph_pwr>;
311 310
312 vdd-l1-l2-supply = <&vreg_s2e_ 311 vdd-l1-l2-supply = <&vreg_s2e_0p85>;
313 vdd-l3-supply = <&vreg_s1e_1p2 312 vdd-l3-supply = <&vreg_s1e_1p25>;
314 vdd-l4-supply = <&vreg_s1c_1p8 313 vdd-l4-supply = <&vreg_s1c_1p86>;
315 vdd-l5-l6-supply = <&vreg_s1c_ 314 vdd-l5-l6-supply = <&vreg_s1c_1p86>;
316 vdd-l7-bob-supply = <&vreg_bob 315 vdd-l7-bob-supply = <&vreg_bob>;
317 316
318 vreg_s1e_1p25: smps1 { 317 vreg_s1e_1p25: smps1 {
319 regulator-name = "vreg 318 regulator-name = "vreg_s1e_1p25";
320 regulator-min-microvol 319 regulator-min-microvolt = <1200000>;
321 regulator-max-microvol 320 regulator-max-microvolt = <1280000>;
322 }; 321 };
323 322
324 vreg_s2e_0p85: smps2 { 323 vreg_s2e_0p85: smps2 {
325 regulator-name = "vreg 324 regulator-name = "vreg_s2e_0p85";
326 regulator-min-microvol 325 regulator-min-microvolt = <950000>;
327 regulator-max-microvol 326 regulator-max-microvolt = <976000>;
328 }; 327 };
329 328
330 vreg_s3e_2p20: smps3 { 329 vreg_s3e_2p20: smps3 {
331 regulator-name = "vreg 330 regulator-name = "vreg_s3e_2p20";
332 regulator-min-microvol 331 regulator-min-microvolt = <2200000>;
333 regulator-max-microvol 332 regulator-max-microvolt = <2352000>;
334 }; 333 };
335 334
336 vreg_l1e_0p9: ldo1 { 335 vreg_l1e_0p9: ldo1 {
337 regulator-name = "vreg 336 regulator-name = "vreg_l1e_0p9";
338 regulator-min-microvol 337 regulator-min-microvolt = <912000>;
339 regulator-max-microvol 338 regulator-max-microvolt = <912000>;
340 }; 339 };
341 340
342 vreg_l2e_1p2: ldo2 { 341 vreg_l2e_1p2: ldo2 {
343 regulator-name = "vreg 342 regulator-name = "vreg_l2e_0p8";
344 regulator-min-microvol 343 regulator-min-microvolt = <1200000>;
345 regulator-max-microvol 344 regulator-max-microvolt = <1200000>;
346 }; 345 };
347 346
348 vreg_l3e_1p2: ldo3 { 347 vreg_l3e_1p2: ldo3 {
349 regulator-name = "vreg 348 regulator-name = "vreg_l3e_1p2";
350 regulator-min-microvol 349 regulator-min-microvolt = <1200000>;
351 regulator-max-microvol 350 regulator-max-microvolt = <1200000>;
352 }; 351 };
353 352
354 vreg_l4e_1p7: ldo4 { 353 vreg_l4e_1p7: ldo4 {
355 regulator-name = "vreg 354 regulator-name = "vreg_l4e_1p7";
356 regulator-min-microvol 355 regulator-min-microvolt = <1776000>;
357 regulator-max-microvol 356 regulator-max-microvolt = <1872000>;
358 }; 357 };
359 358
360 vreg_l5e_0p8: ldo5 { 359 vreg_l5e_0p8: ldo5 {
361 regulator-name = "vreg 360 regulator-name = "vreg_l5e_0p8";
362 regulator-min-microvol 361 regulator-min-microvolt = <800000>;
363 regulator-max-microvol 362 regulator-max-microvolt = <800000>;
364 }; 363 };
365 364
366 vreg_l6e_0p8: ldo6 { 365 vreg_l6e_0p8: ldo6 {
367 regulator-name = "vreg 366 regulator-name = "vreg_l6e_0p8";
368 regulator-min-microvol 367 regulator-min-microvolt = <480000>;
369 regulator-max-microvol 368 regulator-max-microvolt = <904000>;
370 }; 369 };
371 370
372 vreg_l7e_2p8: ldo7 { 371 vreg_l7e_2p8: ldo7 {
373 regulator-name = "vreg 372 regulator-name = "vreg_l7e_2p8";
374 regulator-min-microvol 373 regulator-min-microvolt = <2800000>;
375 regulator-max-microvol 374 regulator-max-microvolt = <2800000>;
376 }; 375 };
377 }; 376 };
378 }; 377 };
379 378
380 &cdsp { 379 &cdsp {
381 status = "okay"; 380 status = "okay";
382 firmware-name = "qcom/sm8350/cdsp.mbn" 381 firmware-name = "qcom/sm8350/cdsp.mbn";
383 }; 382 };
384 383
385 &dispcc { 384 &dispcc {
386 status = "okay"; 385 status = "okay";
387 }; 386 };
388 387
389 &mdss_dsi0 { 388 &mdss_dsi0 {
390 vdda-supply = <&vreg_l6b_1p2>; 389 vdda-supply = <&vreg_l6b_1p2>;
391 status = "okay"; 390 status = "okay";
392 391
393 ports { 392 ports {
394 port@1 { 393 port@1 {
395 endpoint { 394 endpoint {
396 remote-endpoin 395 remote-endpoint = <<9611_a>;
397 data-lanes = < 396 data-lanes = <0 1 2 3>;
398 }; 397 };
399 }; 398 };
400 }; 399 };
401 }; 400 };
402 401
403 &mdss_dsi0_phy { 402 &mdss_dsi0_phy {
404 vdds-supply = <&vreg_l5b_0p88>; 403 vdds-supply = <&vreg_l5b_0p88>;
405 status = "okay"; 404 status = "okay";
406 }; 405 };
407 406
408 &gpi_dma1 { 407 &gpi_dma1 {
409 status = "okay"; 408 status = "okay";
410 }; 409 };
411 410
412 &gpu { 411 &gpu {
413 status = "okay"; 412 status = "okay";
414 413
415 zap-shader { 414 zap-shader {
416 firmware-name = "qcom/sm8350/a 415 firmware-name = "qcom/sm8350/a660_zap.mbn";
417 }; 416 };
418 }; 417 };
419 418
420 &i2c13 { 419 &i2c13 {
421 clock-frequency = <100000>; 420 clock-frequency = <100000>;
422 421
423 status = "okay"; 422 status = "okay";
424 423
425 typec-mux@42 { 424 typec-mux@42 {
426 compatible = "fcs,fsa4480"; 425 compatible = "fcs,fsa4480";
427 reg = <0x42>; 426 reg = <0x42>;
428 427
429 interrupts-extended = <&tlmm 2 428 interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
430 429
431 vcc-supply = <&vreg_bob>; 430 vcc-supply = <&vreg_bob>;
432 mode-switch; 431 mode-switch;
433 orientation-switch; 432 orientation-switch;
434 433
435 port { 434 port {
436 fsa4480_sbu_mux: endpo 435 fsa4480_sbu_mux: endpoint {
437 remote-endpoin 436 remote-endpoint = <&pmic_glink_sbu>;
438 }; 437 };
439 }; 438 };
440 }; 439 };
441 }; 440 };
442 441
443 &i2c15 { 442 &i2c15 {
444 clock-frequency = <400000>; 443 clock-frequency = <400000>;
445 status = "okay"; 444 status = "okay";
446 445
447 lt9611_codec: hdmi-bridge@2b { 446 lt9611_codec: hdmi-bridge@2b {
448 compatible = "lontium,lt9611ux 447 compatible = "lontium,lt9611uxc";
449 reg = <0x2b>; 448 reg = <0x2b>;
450 449
451 interrupts-extended = <&tlmm 5 450 interrupts-extended = <&tlmm 50 IRQ_TYPE_EDGE_FALLING>;
452 reset-gpios = <&tlmm 48 GPIO_A 451 reset-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
453 452
454 vdd-supply = <<9611_1v2>; 453 vdd-supply = <<9611_1v2>;
455 vcc-supply = <<9611_3v3>; 454 vcc-supply = <<9611_3v3>;
456 455
457 pinctrl-names = "default"; 456 pinctrl-names = "default";
458 pinctrl-0 = <<9611_state>; 457 pinctrl-0 = <<9611_state>;
459 458
460 ports { 459 ports {
461 #address-cells = <1>; 460 #address-cells = <1>;
462 #size-cells = <0>; 461 #size-cells = <0>;
463 462
464 port@0 { 463 port@0 {
465 reg = <0>; 464 reg = <0>;
466 465
467 lt9611_a: endp 466 lt9611_a: endpoint {
468 remote 467 remote-endpoint = <&mdss_dsi0_out>;
469 }; 468 };
470 }; 469 };
471 470
472 port@2 { 471 port@2 {
473 reg = <2>; 472 reg = <2>;
474 473
475 lt9611_out: en 474 lt9611_out: endpoint {
476 remote 475 remote-endpoint = <&hdmi_con>;
477 }; 476 };
478 }; 477 };
479 }; 478 };
480 }; 479 };
481 }; 480 };
482 481
483 &mdss { 482 &mdss {
484 status = "okay"; 483 status = "okay";
485 }; 484 };
486 485
487 &mdss_dp { 486 &mdss_dp {
488 status = "okay"; 487 status = "okay";
489 }; <<
490 488
491 &mdss_dp_out { !! 489 ports {
492 data-lanes = <0 1>; !! 490 port@1 {
>> 491 reg = <1>;
>> 492
>> 493 mdss_dp0_out: endpoint {
>> 494 data-lanes = <0 1>;
>> 495 remote-endpoint = <&usb_1_qmpphy_dp_in>;
>> 496 };
>> 497 };
>> 498 };
493 }; 499 };
494 500
495 &mpss { 501 &mpss {
496 status = "okay"; 502 status = "okay";
497 firmware-name = "qcom/sm8350/modem.mbn 503 firmware-name = "qcom/sm8350/modem.mbn";
498 }; 504 };
499 505
500 &pcie0 { 506 &pcie0 {
501 pinctrl-names = "default"; 507 pinctrl-names = "default";
502 pinctrl-0 = <&pcie0_default_state>; 508 pinctrl-0 = <&pcie0_default_state>;
503 509
504 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LO 510 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
505 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIG 511 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
506 512
507 status = "okay"; 513 status = "okay";
508 }; 514 };
509 515
510 &pcie0_phy { 516 &pcie0_phy {
511 vdda-phy-supply = <&vreg_l5b_0p88>; 517 vdda-phy-supply = <&vreg_l5b_0p88>;
512 vdda-pll-supply = <&vreg_l6b_1p2>; 518 vdda-pll-supply = <&vreg_l6b_1p2>;
513 519
514 status = "okay"; 520 status = "okay";
515 }; 521 };
516 522
517 &pcie1 { 523 &pcie1 {
518 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LO 524 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
519 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIG 525 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
520 526
521 pinctrl-names = "default"; 527 pinctrl-names = "default";
522 pinctrl-0 = <&pcie1_default_state>; 528 pinctrl-0 = <&pcie1_default_state>;
523 529
524 status = "okay"; 530 status = "okay";
525 }; 531 };
526 532
527 &pcie1_phy { 533 &pcie1_phy {
528 status = "okay"; 534 status = "okay";
529 vdda-phy-supply = <&vreg_l5b_0p88>; 535 vdda-phy-supply = <&vreg_l5b_0p88>;
530 vdda-pll-supply = <&vreg_l6b_1p2>; 536 vdda-pll-supply = <&vreg_l6b_1p2>;
531 }; 537 };
532 538
533 &qupv3_id_0 { 539 &qupv3_id_0 {
534 status = "okay"; 540 status = "okay";
535 }; 541 };
536 542
537 &qupv3_id_1 { 543 &qupv3_id_1 {
538 status = "okay"; 544 status = "okay";
539 }; 545 };
540 546
541 &qupv3_id_2 { 547 &qupv3_id_2 {
542 status = "okay"; 548 status = "okay";
543 }; 549 };
544 550
545 &sdhc_2 { 551 &sdhc_2 {
546 cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH> 552 cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
547 pinctrl-names = "default", "sleep"; 553 pinctrl-names = "default", "sleep";
548 pinctrl-0 = <&sdc2_default_state &sdc2 554 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
549 pinctrl-1 = <&sdc2_sleep_state &sdc2_c 555 pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
550 vmmc-supply = <&vreg_l9c_2p96>; 556 vmmc-supply = <&vreg_l9c_2p96>;
551 vqmmc-supply = <&vreg_l6c_1p8>; 557 vqmmc-supply = <&vreg_l6c_1p8>;
552 no-sdio; 558 no-sdio;
553 no-mmc; 559 no-mmc;
554 status = "okay"; 560 status = "okay";
555 }; 561 };
556 562
557 &slpi { 563 &slpi {
558 status = "okay"; 564 status = "okay";
559 firmware-name = "qcom/sm8350/slpi.mbn" 565 firmware-name = "qcom/sm8350/slpi.mbn";
560 }; 566 };
561 567
562 &tlmm { 568 &tlmm {
563 gpio-reserved-ranges = <52 8>; 569 gpio-reserved-ranges = <52 8>;
564 570
565 gpio-line-names = 571 gpio-line-names =
566 "APPS_I2C_SDA", /* GPIO_0 */ 572 "APPS_I2C_SDA", /* GPIO_0 */
567 "APPS_I2C_SCL", 573 "APPS_I2C_SCL",
568 "FSA_INT_N", 574 "FSA_INT_N",
569 "USER_LED3_EN", 575 "USER_LED3_EN",
570 "SMBUS_SDA_1P8", 576 "SMBUS_SDA_1P8",
571 "SMBUS_SCL_1P8", 577 "SMBUS_SCL_1P8",
572 "2M2_3P3_EN", 578 "2M2_3P3_EN",
573 "ALERT_DUAL_M2_N", 579 "ALERT_DUAL_M2_N",
574 "EXP_UART_CTS", 580 "EXP_UART_CTS",
575 "EXP_UART_RFR", 581 "EXP_UART_RFR",
576 "EXP_UART_TX", /* GPIO_10 */ 582 "EXP_UART_TX", /* GPIO_10 */
577 "EXP_UART_RX", 583 "EXP_UART_RX",
578 "NC", 584 "NC",
579 "NC", 585 "NC",
580 "RCM_MARKER1", 586 "RCM_MARKER1",
581 "WSA0_EN", 587 "WSA0_EN",
582 "CAM1_RESET_N", 588 "CAM1_RESET_N",
583 "CAM0_RESET_N", 589 "CAM0_RESET_N",
584 "DEBUG_UART_TX", 590 "DEBUG_UART_TX",
585 "DEBUG_UART_RX", 591 "DEBUG_UART_RX",
586 "TS_I2C_SDA", /* GPIO_20 */ 592 "TS_I2C_SDA", /* GPIO_20 */
587 "TS_I2C_SCL", 593 "TS_I2C_SCL",
588 "TS_RESET_N", 594 "TS_RESET_N",
589 "TS_INT_N", 595 "TS_INT_N",
590 "DISP0_RESET_N", 596 "DISP0_RESET_N",
591 "DISP1_RESET_N", 597 "DISP1_RESET_N",
592 "ETH_RESET", 598 "ETH_RESET",
593 "RCM_MARKER2", 599 "RCM_MARKER2",
594 "CAM_DC_MIPI_MUX_EN", 600 "CAM_DC_MIPI_MUX_EN",
595 "CAM_DC_MIPI_MUX_SEL", 601 "CAM_DC_MIPI_MUX_SEL",
596 "AFC_PHY_TA_D_PLUS", /* GPIO_3 602 "AFC_PHY_TA_D_PLUS", /* GPIO_30 */
597 "AFC_PHY_TA_D_MINUS", 603 "AFC_PHY_TA_D_MINUS",
598 "PM8008_1_IRQ", 604 "PM8008_1_IRQ",
599 "PM8008_1_RESET_N", 605 "PM8008_1_RESET_N",
600 "PM8008_2_IRQ", 606 "PM8008_2_IRQ",
601 "PM8008_2_RESET_N", 607 "PM8008_2_RESET_N",
602 "CAM_DC_I3C_SDA", 608 "CAM_DC_I3C_SDA",
603 "CAM_DC_I3C_SCL", 609 "CAM_DC_I3C_SCL",
604 "FP_INT_N", 610 "FP_INT_N",
605 "FP_WUHB_INT_N", 611 "FP_WUHB_INT_N",
606 "SMB_SPMI_DATA", /* GPIO_40 */ 612 "SMB_SPMI_DATA", /* GPIO_40 */
607 "SMB_SPMI_CLK", 613 "SMB_SPMI_CLK",
608 "USB_HUB_RESET", 614 "USB_HUB_RESET",
609 "FORCE_USB_BOOT", 615 "FORCE_USB_BOOT",
610 "LRF_IRQ", 616 "LRF_IRQ",
611 "NC", 617 "NC",
612 "IMU2_INT", 618 "IMU2_INT",
613 "HDMI_3P3_EN", 619 "HDMI_3P3_EN",
614 "HDMI_RSTN", 620 "HDMI_RSTN",
615 "HDMI_1P2_EN", 621 "HDMI_1P2_EN",
616 "HDMI_INT", /* GPIO_50 */ 622 "HDMI_INT", /* GPIO_50 */
617 "USB1_ID", 623 "USB1_ID",
618 "FP_SPI_MISO", 624 "FP_SPI_MISO",
619 "FP_SPI_MOSI", 625 "FP_SPI_MOSI",
620 "FP_SPI_CLK", 626 "FP_SPI_CLK",
621 "FP_SPI_CS_N", 627 "FP_SPI_CS_N",
622 "NFC_ESE_SPI_MISO", 628 "NFC_ESE_SPI_MISO",
623 "NFC_ESE_SPI_MOSI", 629 "NFC_ESE_SPI_MOSI",
624 "NFC_ESE_SPI_CLK", 630 "NFC_ESE_SPI_CLK",
625 "NFC_ESE_SPI_CS", 631 "NFC_ESE_SPI_CS",
626 "NFC_I2C_SDA", /* GPIO_60 */ 632 "NFC_I2C_SDA", /* GPIO_60 */
627 "NFC_I2C_SCLC", 633 "NFC_I2C_SCLC",
628 "NFC_EN", 634 "NFC_EN",
629 "NFC_CLK_REQ", 635 "NFC_CLK_REQ",
630 "HST_WLAN_EN", 636 "HST_WLAN_EN",
631 "HST_BT_EN", 637 "HST_BT_EN",
632 "HST_SW_CTRL", 638 "HST_SW_CTRL",
633 "NC", 639 "NC",
634 "HST_BT_UART_CTS", 640 "HST_BT_UART_CTS",
635 "HST_BT_UART_RFR", 641 "HST_BT_UART_RFR",
636 "HST_BT_UART_TX", /* GPIO_70 * 642 "HST_BT_UART_TX", /* GPIO_70 */
637 "HST_BT_UART_RX", 643 "HST_BT_UART_RX",
638 "CAM_DC_SPI0_MISO", 644 "CAM_DC_SPI0_MISO",
639 "CAM_DC_SPI0_MOSI", 645 "CAM_DC_SPI0_MOSI",
640 "CAM_DC_SPI0_CLK", 646 "CAM_DC_SPI0_CLK",
641 "CAM_DC_SPI0_CS_N", 647 "CAM_DC_SPI0_CS_N",
642 "CAM_DC_SPI1_MISO", 648 "CAM_DC_SPI1_MISO",
643 "CAM_DC_SPI1_MOSI", 649 "CAM_DC_SPI1_MOSI",
644 "CAM_DC_SPI1_CLK", 650 "CAM_DC_SPI1_CLK",
645 "CAM_DC_SPI1_CS_N", 651 "CAM_DC_SPI1_CS_N",
646 "HALL_INT_N", /* GPIO_80 */ 652 "HALL_INT_N", /* GPIO_80 */
647 "USB_PHY_PS", 653 "USB_PHY_PS",
648 "MDP_VSYNC_P", 654 "MDP_VSYNC_P",
649 "MDP_VSYNC_S", 655 "MDP_VSYNC_S",
650 "ETH_3P3_EN", 656 "ETH_3P3_EN",
651 "RADAR_INT", 657 "RADAR_INT",
652 "NFC_DWL_REQ", 658 "NFC_DWL_REQ",
653 "SM_GPIO_87", 659 "SM_GPIO_87",
654 "WCD_RESET_N", 660 "WCD_RESET_N",
655 "ALSP_INT_N", 661 "ALSP_INT_N",
656 "PRESS_INT", /* GPIO_90 */ 662 "PRESS_INT", /* GPIO_90 */
657 "SAR_INT_N", 663 "SAR_INT_N",
658 "SD_CARD_DET_N", 664 "SD_CARD_DET_N",
659 "NC", 665 "NC",
660 "PCIE0_RESET_N", 666 "PCIE0_RESET_N",
661 "PCIE0_CLK_REQ_N", 667 "PCIE0_CLK_REQ_N",
662 "PCIE0_WAKE_N", 668 "PCIE0_WAKE_N",
663 "PCIE1_RESET_N", 669 "PCIE1_RESET_N",
664 "PCIE1_CLK_REQ_N", 670 "PCIE1_CLK_REQ_N",
665 "PCIE1_WAKE_N", 671 "PCIE1_WAKE_N",
666 "CAM_MCLK0", /* GPIO_100 */ 672 "CAM_MCLK0", /* GPIO_100 */
667 "CAM_MCLK1", 673 "CAM_MCLK1",
668 "CAM_MCLK2", 674 "CAM_MCLK2",
669 "CAM_MCLK3", 675 "CAM_MCLK3",
670 "CAM_MCLK4", 676 "CAM_MCLK4",
671 "CAM_MCLK5", 677 "CAM_MCLK5",
672 "CAM2_RESET_N", 678 "CAM2_RESET_N",
673 "CCI_I2C0_SDA", 679 "CCI_I2C0_SDA",
674 "CCI_I2C0_SCL", 680 "CCI_I2C0_SCL",
675 "CCI_I2C1_SDA", 681 "CCI_I2C1_SDA",
676 "CCI_I2C1_SCL", /* GPIO_110 */ 682 "CCI_I2C1_SCL", /* GPIO_110 */
677 "CCI_I2C2_SDA", 683 "CCI_I2C2_SDA",
678 "CCI_I2C2_SCL", 684 "CCI_I2C2_SCL",
679 "CCI_I2C3_SDA", 685 "CCI_I2C3_SDA",
680 "CCI_I2C3_SCL", 686 "CCI_I2C3_SCL",
681 "CAM5_RESET_N", 687 "CAM5_RESET_N",
682 "CAM4_RESET_N", 688 "CAM4_RESET_N",
683 "CAM3_RESET_N", 689 "CAM3_RESET_N",
684 "IMU1_INT", 690 "IMU1_INT",
685 "MAG_INT_N", 691 "MAG_INT_N",
686 "MI2S2_I2S_SCK", /* GPIO_120 * 692 "MI2S2_I2S_SCK", /* GPIO_120 */
687 "MI2S2_I2S_DAT0", 693 "MI2S2_I2S_DAT0",
688 "MI2S2_I2S_WS", 694 "MI2S2_I2S_WS",
689 "HIFI_DAC_I2S_MCLK", 695 "HIFI_DAC_I2S_MCLK",
690 "MI2S2_I2S_DAT1", 696 "MI2S2_I2S_DAT1",
691 "HIFI_DAC_I2S_SCK", 697 "HIFI_DAC_I2S_SCK",
692 "HIFI_DAC_I2S_DAT0", 698 "HIFI_DAC_I2S_DAT0",
693 "NC", 699 "NC",
694 "HIFI_DAC_I2S_WS", 700 "HIFI_DAC_I2S_WS",
695 "HST_BT_WLAN_SLIMBUS_CLK", 701 "HST_BT_WLAN_SLIMBUS_CLK",
696 "HST_BT_WLAN_SLIMBUS_DAT0", /* 702 "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
697 "BT_LED_EN", 703 "BT_LED_EN",
698 "WLAN_LED_EN", 704 "WLAN_LED_EN",
699 "NC", 705 "NC",
700 "NC", 706 "NC",
701 "NC", 707 "NC",
702 "UIM2_PRESENT", 708 "UIM2_PRESENT",
703 "NC", 709 "NC",
704 "NC", 710 "NC",
705 "NC", 711 "NC",
706 "UIM1_PRESENT", /* GPIO_140 */ 712 "UIM1_PRESENT", /* GPIO_140 */
707 "NC", 713 "NC",
708 "SM_RFFE0_DATA", 714 "SM_RFFE0_DATA",
709 "NC", 715 "NC",
710 "SM_RFFE1_DATA", 716 "SM_RFFE1_DATA",
711 "SM_MSS_GRFC4", 717 "SM_MSS_GRFC4",
712 "SM_MSS_GRFC5", 718 "SM_MSS_GRFC5",
713 "SM_MSS_GRFC6", 719 "SM_MSS_GRFC6",
714 "SM_MSS_GRFC7", 720 "SM_MSS_GRFC7",
715 "SM_RFFE4_CLK", 721 "SM_RFFE4_CLK",
716 "SM_RFFE4_DATA", /* GPIO_150 * 722 "SM_RFFE4_DATA", /* GPIO_150 */
717 "WLAN_COEX_UART1_RX", 723 "WLAN_COEX_UART1_RX",
718 "WLAN_COEX_UART1_TX", 724 "WLAN_COEX_UART1_TX",
719 "HST_SW_CTRL", 725 "HST_SW_CTRL",
720 "DSI0_STATUS", 726 "DSI0_STATUS",
721 "DSI1_STATUS", 727 "DSI1_STATUS",
722 "APPS_PBL_BOOT_SPEED_1", 728 "APPS_PBL_BOOT_SPEED_1",
723 "APPS_BOOT_FROM_ROM", 729 "APPS_BOOT_FROM_ROM",
724 "APPS_PBL_BOOT_SPEED_0", 730 "APPS_PBL_BOOT_SPEED_0",
725 "QLINK0_REQ", 731 "QLINK0_REQ",
726 "QLINK0_EN", /* GPIO_160 */ 732 "QLINK0_EN", /* GPIO_160 */
727 "QLINK0_WMSS_RESET_N", 733 "QLINK0_WMSS_RESET_N",
728 "NC", 734 "NC",
729 "NC", 735 "NC",
730 "NC", 736 "NC",
731 "NC", 737 "NC",
732 "NC", 738 "NC",
733 "NC", 739 "NC",
734 "WCD_SWR_TX_CLK", 740 "WCD_SWR_TX_CLK",
735 "WCD_SWR_TX_DATA0", 741 "WCD_SWR_TX_DATA0",
736 "WCD_SWR_TX_DATA1", /* GPIO_17 742 "WCD_SWR_TX_DATA1", /* GPIO_170 */
737 "WCD_SWR_RX_CLK", 743 "WCD_SWR_RX_CLK",
738 "WCD_SWR_RX_DATA0", 744 "WCD_SWR_RX_DATA0",
739 "WCD_SWR_RX_DATA1", 745 "WCD_SWR_RX_DATA1",
740 "DMIC01_CLK", 746 "DMIC01_CLK",
741 "DMIC01_DATA", 747 "DMIC01_DATA",
742 "DMIC23_CLK", 748 "DMIC23_CLK",
743 "DMIC23_DATA", 749 "DMIC23_DATA",
744 "WSA_SWR_CLK", 750 "WSA_SWR_CLK",
745 "WSA_SWR_DATA", 751 "WSA_SWR_DATA",
746 "DMIC45_CLK", /* GPIO_180 */ 752 "DMIC45_CLK", /* GPIO_180 */
747 "DMIC45_DATA", 753 "DMIC45_DATA",
748 "WCD_SWR_TX_DATA2", 754 "WCD_SWR_TX_DATA2",
749 "SENSOR_I3C_SDA", 755 "SENSOR_I3C_SDA",
750 "SENSOR_I3C_SCL", 756 "SENSOR_I3C_SCL",
751 "CAM_OIS0_I3C_SDA", 757 "CAM_OIS0_I3C_SDA",
752 "CAM_OIS0_I3C_SCL", 758 "CAM_OIS0_I3C_SCL",
753 "IMU_SPI_MISO", 759 "IMU_SPI_MISO",
754 "IMU_SPI_MOSI", 760 "IMU_SPI_MOSI",
755 "IMU_SPI_CLK", 761 "IMU_SPI_CLK",
756 "IMU_SPI_CS_N", /* GPIO_190 */ 762 "IMU_SPI_CS_N", /* GPIO_190 */
757 "MAG_I2C_SDA", 763 "MAG_I2C_SDA",
758 "MAG_I2C_SCL", 764 "MAG_I2C_SCL",
759 "SENSOR_I2C_SDA", 765 "SENSOR_I2C_SDA",
760 "SENSOR_I2C_SCL", 766 "SENSOR_I2C_SCL",
761 "RADAR_SPI_MISO", 767 "RADAR_SPI_MISO",
762 "RADAR_SPI_MOSI", 768 "RADAR_SPI_MOSI",
763 "RADAR_SPI_CLK", 769 "RADAR_SPI_CLK",
764 "RADAR_SPI_CS_N", 770 "RADAR_SPI_CS_N",
765 "HST_BLE_UART_TX", 771 "HST_BLE_UART_TX",
766 "HST_BLE_UART_RX", /* GPIO_200 772 "HST_BLE_UART_RX", /* GPIO_200 */
767 "HST_WLAN_UART_TX", 773 "HST_WLAN_UART_TX",
768 "HST_WLAN_UART_RX"; 774 "HST_WLAN_UART_RX";
769 775
770 pcie0_default_state: pcie0-default-sta 776 pcie0_default_state: pcie0-default-state {
771 perst-pins { 777 perst-pins {
772 pins = "gpio94"; 778 pins = "gpio94";
773 function = "gpio"; 779 function = "gpio";
774 drive-strength = <2>; 780 drive-strength = <2>;
775 bias-pull-down; 781 bias-pull-down;
776 }; 782 };
777 783
778 clkreq-pins { 784 clkreq-pins {
779 pins = "gpio95"; 785 pins = "gpio95";
780 function = "pcie0_clkr 786 function = "pcie0_clkreqn";
781 drive-strength = <2>; 787 drive-strength = <2>;
782 bias-pull-up; 788 bias-pull-up;
783 }; 789 };
784 790
785 wake-pins { 791 wake-pins {
786 pins = "gpio96"; 792 pins = "gpio96";
787 function = "gpio"; 793 function = "gpio";
788 drive-strength = <2>; 794 drive-strength = <2>;
789 bias-pull-up; 795 bias-pull-up;
790 }; 796 };
791 }; 797 };
792 798
793 pcie1_default_state: pcie1-default-sta 799 pcie1_default_state: pcie1-default-state {
794 perst-pins { 800 perst-pins {
795 pins = "gpio97"; 801 pins = "gpio97";
796 function = "gpio"; 802 function = "gpio";
797 drive-strength = <2>; 803 drive-strength = <2>;
798 bias-pull-down; 804 bias-pull-down;
799 }; 805 };
800 806
801 clkreq-pins { 807 clkreq-pins {
802 pins = "gpio98"; 808 pins = "gpio98";
803 function = "pcie1_clkr 809 function = "pcie1_clkreqn";
804 drive-strength = <2>; 810 drive-strength = <2>;
805 bias-pull-up; 811 bias-pull-up;
806 }; 812 };
807 813
808 wake-pins { 814 wake-pins {
809 pins = "gpio99"; 815 pins = "gpio99";
810 function = "gpio"; 816 function = "gpio";
811 drive-strength = <2>; 817 drive-strength = <2>;
812 bias-pull-up; 818 bias-pull-up;
813 }; 819 };
814 }; 820 };
815 821
816 sdc2_card_det_n: sd-card-det-n-state { 822 sdc2_card_det_n: sd-card-det-n-state {
817 pins = "gpio92"; 823 pins = "gpio92";
818 function = "gpio"; 824 function = "gpio";
819 drive-strength = <2>; 825 drive-strength = <2>;
820 bias-pull-up; 826 bias-pull-up;
821 }; 827 };
822 }; 828 };
823 829
824 &uart2 { 830 &uart2 {
825 status = "okay"; 831 status = "okay";
826 }; 832 };
827 833
828 &ufs_mem_hc { 834 &ufs_mem_hc {
829 status = "okay"; 835 status = "okay";
830 836
831 reset-gpios = <&tlmm 203 GPIO_ACTIVE_L 837 reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
832 838
833 vcc-supply = <&vreg_l7b_2p96>; 839 vcc-supply = <&vreg_l7b_2p96>;
834 vcc-max-microamp = <800000>; 840 vcc-max-microamp = <800000>;
835 vccq-supply = <&vreg_l9b_1p2>; 841 vccq-supply = <&vreg_l9b_1p2>;
836 vccq-max-microamp = <900000>; 842 vccq-max-microamp = <900000>;
837 vdd-hba-supply = <&vreg_l9b_1p2>; 843 vdd-hba-supply = <&vreg_l9b_1p2>;
838 }; 844 };
839 845
840 &ufs_mem_phy { 846 &ufs_mem_phy {
841 status = "okay"; 847 status = "okay";
842 848
843 vdda-phy-supply = <&vreg_l5b_0p88>; 849 vdda-phy-supply = <&vreg_l5b_0p88>;
844 vdda-pll-supply = <&vreg_l6b_1p2>; 850 vdda-pll-supply = <&vreg_l6b_1p2>;
845 }; 851 };
846 852
847 &usb_1 { 853 &usb_1 {
848 status = "okay"; 854 status = "okay";
849 }; 855 };
850 856
851 &usb_1_dwc3 { 857 &usb_1_dwc3 {
852 dr_mode = "otg"; 858 dr_mode = "otg";
853 usb-role-switch; 859 usb-role-switch;
854 }; 860 };
855 861
856 &usb_1_dwc3_hs { 862 &usb_1_dwc3_hs {
857 remote-endpoint = <&pmic_glink_hs_in>; 863 remote-endpoint = <&pmic_glink_hs_in>;
858 }; 864 };
859 865
>> 866 &usb_1_dwc3_ss {
>> 867 remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
>> 868 };
>> 869
860 &usb_1_hsphy { 870 &usb_1_hsphy {
861 status = "okay"; 871 status = "okay";
862 872
863 vdda-pll-supply = <&vreg_l5b_0p88>; 873 vdda-pll-supply = <&vreg_l5b_0p88>;
864 vdda18-supply = <&vreg_l1c_1p8>; 874 vdda18-supply = <&vreg_l1c_1p8>;
865 vdda33-supply = <&vreg_l2b_3p07>; 875 vdda33-supply = <&vreg_l2b_3p07>;
866 }; 876 };
867 877
868 &usb_1_qmpphy { 878 &usb_1_qmpphy {
869 status = "okay"; 879 status = "okay";
870 880
871 vdda-phy-supply = <&vreg_l6b_1p2>; 881 vdda-phy-supply = <&vreg_l6b_1p2>;
872 vdda-pll-supply = <&vreg_l1b_0p88>; 882 vdda-pll-supply = <&vreg_l1b_0p88>;
>> 883
>> 884 orientation-switch;
>> 885 };
>> 886
>> 887 &usb_1_qmpphy_dp_in {
>> 888 remote-endpoint = <&mdss_dp0_out>;
873 }; 889 };
874 890
875 &usb_1_qmpphy_out { 891 &usb_1_qmpphy_out {
876 remote-endpoint = <&pmic_glink_ss_in>; 892 remote-endpoint = <&pmic_glink_ss_in>;
>> 893 };
>> 894
>> 895 &usb_1_qmpphy_usb_ss_in {
>> 896 remote-endpoint = <&usb_1_dwc3_ss>;
877 }; 897 };
878 898
879 &usb_2 { 899 &usb_2 {
880 status = "okay"; 900 status = "okay";
881 }; 901 };
882 902
883 &usb_2_dwc3 { 903 &usb_2_dwc3 {
884 dr_mode = "host"; 904 dr_mode = "host";
885 905
886 pinctrl-names = "default"; 906 pinctrl-names = "default";
887 pinctrl-0 = <&usb_hub_enabled_state>; 907 pinctrl-0 = <&usb_hub_enabled_state>;
888 }; 908 };
889 909
890 &usb_2_hsphy { 910 &usb_2_hsphy {
891 status = "okay"; 911 status = "okay";
892 912
893 vdda-pll-supply = <&vreg_l5b_0p88>; 913 vdda-pll-supply = <&vreg_l5b_0p88>;
894 vdda18-supply = <&vreg_l1c_1p8>; 914 vdda18-supply = <&vreg_l1c_1p8>;
895 vdda33-supply = <&vreg_l2b_3p07>; 915 vdda33-supply = <&vreg_l2b_3p07>;
896 }; 916 };
897 917
898 &usb_2_qmpphy { 918 &usb_2_qmpphy {
899 status = "okay"; 919 status = "okay";
900 920
901 vdda-phy-supply = <&vreg_l6b_1p2>; 921 vdda-phy-supply = <&vreg_l6b_1p2>;
902 vdda-pll-supply = <&vreg_l5b_0p88>; 922 vdda-pll-supply = <&vreg_l5b_0p88>;
903 }; 923 };
904 924
905 /* PINCTRL - additions to nodes defined in sm8 925 /* PINCTRL - additions to nodes defined in sm8350.dtsi */
906 926
907 &tlmm { 927 &tlmm {
908 usb_hub_enabled_state: usb-hub-enabled 928 usb_hub_enabled_state: usb-hub-enabled-state {
909 pins = "gpio42"; 929 pins = "gpio42";
910 function = "gpio"; 930 function = "gpio";
911 931
912 drive-strength = <2>; 932 drive-strength = <2>;
913 output-low; 933 output-low;
914 }; 934 };
915 935
916 lt9611_state: lt9611-state { 936 lt9611_state: lt9611-state {
917 rst-pins { 937 rst-pins {
918 pins = "gpio48"; 938 pins = "gpio48";
919 function = "gpio"; 939 function = "gpio";
920 940
921 output-high; 941 output-high;
922 input-disable; 942 input-disable;
923 }; 943 };
924 944
925 irq-pins { 945 irq-pins {
926 pins = "gpio50"; 946 pins = "gpio50";
927 function = "gpio"; 947 function = "gpio";
928 bias-disable; 948 bias-disable;
929 }; 949 };
930 }; 950 };
931 }; 951 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.