1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2023 Qualcomm Innovation Cent
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/gpio-keys.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regu
12
13 #include "x1e80100.dtsi"
14 #include "x1e80100-pmics.dtsi"
15
16 / {
17 model = "Qualcomm Technologies, Inc. X
18 compatible = "qcom,x1e80100-crd", "qco
19
20 aliases {
21 serial0 = &uart21;
22 };
23
24 wcd938x: audio-codec {
25 compatible = "qcom,wcd9385-cod
26
27 pinctrl-names = "default";
28 pinctrl-0 = <&wcd_default>;
29
30 qcom,micbias1-microvolt = <180
31 qcom,micbias2-microvolt = <180
32 qcom,micbias3-microvolt = <180
33 qcom,micbias4-microvolt = <180
34 qcom,mbhc-buttons-vthreshold-m
35 qcom,mbhc-headset-vthreshold-m
36 qcom,mbhc-headphone-vthreshold
37 qcom,rx-device = <&wcd_rx>;
38 qcom,tx-device = <&wcd_tx>;
39
40 reset-gpios = <&tlmm 191 GPIO_
41
42 vdd-buck-supply = <&vreg_l15b_
43 vdd-rxtx-supply = <&vreg_l15b_
44 vdd-io-supply = <&vreg_l15b_1p
45 vdd-mic-bias-supply = <&vreg_b
46
47 #sound-dai-cells = <1>;
48 };
49
50 chosen {
51 stdout-path = "serial0:115200n
52 };
53
54 gpio-keys {
55 compatible = "gpio-keys";
56
57 pinctrl-0 = <&hall_int_n_defau
58 pinctrl-names = "default";
59
60 switch-lid {
61 gpios = <&tlmm 92 GPIO
62 linux,input-type = <EV
63 linux,code = <SW_LID>;
64 wakeup-source;
65 wakeup-event-action =
66 };
67 };
68
69 pmic-glink {
70 compatible = "qcom,x1e80100-pm
71 "qcom,sm8550-pmic
72 "qcom,pmic-glink"
73 #address-cells = <1>;
74 #size-cells = <0>;
75 orientation-gpios = <&tlmm 121
76 <&tlmm 123
77 <&tlmm 125
78
79 /* Left-side rear port */
80 connector@0 {
81 compatible = "usb-c-co
82 reg = <0>;
83 power-role = "dual";
84 data-role = "dual";
85
86 ports {
87 #address-cells
88 #size-cells =
89
90 port@0 {
91 reg =
92
93 pmic_g
94
95 };
96 };
97
98 port@1 {
99 reg =
100
101 pmic_g
102
103 };
104 };
105 };
106 };
107
108 /* Left-side front port */
109 connector@1 {
110 compatible = "usb-c-co
111 reg = <1>;
112 power-role = "dual";
113 data-role = "dual";
114
115 ports {
116 #address-cells
117 #size-cells =
118
119 port@0 {
120 reg =
121
122 pmic_g
123
124 };
125 };
126
127 port@1 {
128 reg =
129
130 pmic_g
131
132 };
133 };
134 };
135 };
136
137 /* Right-side port */
138 connector@2 {
139 compatible = "usb-c-co
140 reg = <2>;
141 power-role = "dual";
142 data-role = "dual";
143
144 ports {
145 #address-cells
146 #size-cells =
147
148 port@0 {
149 reg =
150
151 pmic_g
152
153 };
154 };
155
156 port@1 {
157 reg =
158
159 pmic_g
160
161 };
162 };
163 };
164 };
165 };
166
167 reserved-memory {
168 linux,cma {
169 compatible = "shared-d
170 size = <0x0 0x8000000>
171 reusable;
172 linux,cma-default;
173 };
174 };
175
176 sound {
177 compatible = "qcom,x1e80100-sn
178 model = "X1E80100-CRD";
179 audio-routing = "WooferLeft IN
180 "TweeterLeft I
181 "WooferRight I
182 "TweeterRight
183 "IN1_HPHL", "H
184 "IN2_HPHR", "H
185 "AMIC2", "MIC
186 "VA DMIC0", "M
187 "VA DMIC1", "M
188 "VA DMIC2", "M
189 "VA DMIC3", "M
190 "VA DMIC0", "V
191 "VA DMIC1", "V
192 "VA DMIC2", "V
193 "VA DMIC3", "V
194 "TX SWR_INPUT1
195
196 wcd-playback-dai-link {
197 link-name = "WCD Playb
198
199 cpu {
200 sound-dai = <&
201 };
202
203 codec {
204 sound-dai = <&
205 };
206
207 platform {
208 sound-dai = <&
209 };
210 };
211
212 wcd-capture-dai-link {
213 link-name = "WCD Captu
214
215 cpu {
216 sound-dai = <&
217 };
218
219 codec {
220 sound-dai = <&
221 };
222
223 platform {
224 sound-dai = <&
225 };
226 };
227
228 wsa-dai-link {
229 link-name = "WSA Playb
230
231 cpu {
232 sound-dai = <&
233 };
234
235 codec {
236 sound-dai = <&
237 <&
238 <&
239 <&
240 };
241
242 platform {
243 sound-dai = <&
244 };
245 };
246
247 va-dai-link {
248 link-name = "VA Captur
249
250 cpu {
251 sound-dai = <&
252 };
253
254 codec {
255 sound-dai = <&
256 };
257
258 platform {
259 sound-dai = <&
260 };
261 };
262 };
263
264 vph_pwr: vph-pwr-regulator {
265 compatible = "regulator-fixed"
266
267 regulator-name = "vph_pwr";
268 regulator-min-microvolt = <370
269 regulator-max-microvolt = <370
270
271 regulator-always-on;
272 regulator-boot-on;
273 };
274
275 vreg_edp_3p3: regulator-edp-3p3 {
276 compatible = "regulator-fixed"
277
278 regulator-name = "VREG_EDP_3P3
279 regulator-min-microvolt = <330
280 regulator-max-microvolt = <330
281
282 gpio = <&tlmm 70 GPIO_ACTIVE_H
283 enable-active-high;
284
285 pinctrl-0 = <&edp_reg_en>;
286 pinctrl-names = "default";
287
288 regulator-boot-on;
289 };
290
291 vreg_nvme: regulator-nvme {
292 compatible = "regulator-fixed"
293
294 regulator-name = "VREG_NVME_3P
295 regulator-min-microvolt = <330
296 regulator-max-microvolt = <330
297
298 gpio = <&tlmm 18 GPIO_ACTIVE_H
299 enable-active-high;
300
301 pinctrl-names = "default";
302 pinctrl-0 = <&nvme_reg_en>;
303
304 regulator-boot-on;
305 };
306
307 vreg_wwan: regulator-wwan {
308 compatible = "regulator-fixed"
309
310 regulator-name = "SDX_VPH_PWR"
311 regulator-min-microvolt = <330
312 regulator-max-microvolt = <330
313
314 gpio = <&tlmm 221 GPIO_ACTIVE_
315 enable-active-high;
316
317 pinctrl-0 = <&wwan_sw_en>;
318 pinctrl-names = "default";
319
320 regulator-boot-on;
321 };
322 };
323
324 &apps_rsc {
325 regulators-0 {
326 compatible = "qcom,pm8550-rpmh
327 qcom,pmic-id = "b";
328
329 vdd-bob1-supply = <&vph_pwr>;
330 vdd-bob2-supply = <&vph_pwr>;
331 vdd-l1-l4-l10-supply = <&vreg_
332 vdd-l2-l13-l14-supply = <&vreg
333 vdd-l5-l16-supply = <&vreg_bob
334 vdd-l6-l7-supply = <&vreg_bob2
335 vdd-l8-l9-supply = <&vreg_bob1
336 vdd-l12-supply = <&vreg_s5j_1p
337 vdd-l15-supply = <&vreg_s4c_1p
338 vdd-l17-supply = <&vreg_bob2>;
339
340 vreg_bob1: bob1 {
341 regulator-name = "vreg
342 regulator-min-microvol
343 regulator-max-microvol
344 regulator-initial-mode
345 };
346
347 vreg_bob2: bob2 {
348 regulator-name = "vreg
349 regulator-min-microvol
350 regulator-max-microvol
351 regulator-initial-mode
352 };
353
354 vreg_l1b_1p8: ldo1 {
355 regulator-name = "vreg
356 regulator-min-microvol
357 regulator-max-microvol
358 regulator-initial-mode
359 };
360
361 vreg_l2b_3p0: ldo2 {
362 regulator-name = "vreg
363 regulator-min-microvol
364 regulator-max-microvol
365 regulator-initial-mode
366 };
367
368 vreg_l4b_1p8: ldo4 {
369 regulator-name = "vreg
370 regulator-min-microvol
371 regulator-max-microvol
372 regulator-initial-mode
373 };
374
375 vreg_l5b_3p0: ldo5 {
376 regulator-name = "vreg
377 regulator-min-microvol
378 regulator-max-microvol
379 regulator-initial-mode
380 };
381
382 vreg_l6b_1p8: ldo6 {
383 regulator-name = "vreg
384 regulator-min-microvol
385 regulator-max-microvol
386 regulator-initial-mode
387 };
388
389 vreg_l7b_2p8: ldo7 {
390 regulator-name = "vreg
391 regulator-min-microvol
392 regulator-max-microvol
393 regulator-initial-mode
394 };
395
396 vreg_l8b_3p0: ldo8 {
397 regulator-name = "vreg
398 regulator-min-microvol
399 regulator-max-microvol
400 regulator-initial-mode
401 };
402
403 vreg_l9b_2p9: ldo9 {
404 regulator-name = "vreg
405 regulator-min-microvol
406 regulator-max-microvol
407 regulator-initial-mode
408 };
409
410 vreg_l10b_1p8: ldo10 {
411 regulator-name = "vreg
412 regulator-min-microvol
413 regulator-max-microvol
414 regulator-initial-mode
415 };
416
417 vreg_l12b_1p2: ldo12 {
418 regulator-name = "vreg
419 regulator-min-microvol
420 regulator-max-microvol
421 regulator-initial-mode
422 };
423
424 vreg_l13b_3p0: ldo13 {
425 regulator-name = "vreg
426 regulator-min-microvol
427 regulator-max-microvol
428 regulator-initial-mode
429 };
430
431 vreg_l14b_3p0: ldo14 {
432 regulator-name = "vreg
433 regulator-min-microvol
434 regulator-max-microvol
435 regulator-initial-mode
436 };
437
438 vreg_l15b_1p8: ldo15 {
439 regulator-name = "vreg
440 regulator-min-microvol
441 regulator-max-microvol
442 regulator-initial-mode
443 };
444
445 vreg_l16b_2p9: ldo16 {
446 regulator-name = "vreg
447 regulator-min-microvol
448 regulator-max-microvol
449 regulator-initial-mode
450 };
451
452 vreg_l17b_2p5: ldo17 {
453 regulator-name = "vreg
454 regulator-min-microvol
455 regulator-max-microvol
456 regulator-initial-mode
457 };
458 };
459
460 regulators-1 {
461 compatible = "qcom,pm8550ve-rp
462 qcom,pmic-id = "c";
463
464 vdd-l1-supply = <&vreg_s5j_1p2
465 vdd-l2-supply = <&vreg_s1f_0p7
466 vdd-l3-supply = <&vreg_s1f_0p7
467 vdd-s4-supply = <&vph_pwr>;
468
469 vreg_s4c_1p8: smps4 {
470 regulator-name = "vreg
471 regulator-min-microvol
472 regulator-max-microvol
473 regulator-initial-mode
474 };
475
476 vreg_l1c_1p2: ldo1 {
477 regulator-name = "vreg
478 regulator-min-microvol
479 regulator-max-microvol
480 regulator-initial-mode
481 };
482
483 vreg_l2c_0p8: ldo2 {
484 regulator-name = "vreg
485 regulator-min-microvol
486 regulator-max-microvol
487 regulator-initial-mode
488 };
489
490 vreg_l3c_0p8: ldo3 {
491 regulator-name = "vreg
492 regulator-min-microvol
493 regulator-max-microvol
494 regulator-initial-mode
495 };
496 };
497
498 regulators-2 {
499 compatible = "qcom,pmc8380-rpm
500 qcom,pmic-id = "d";
501
502 vdd-l1-supply = <&vreg_s1f_0p7
503 vdd-l2-supply = <&vreg_s1f_0p7
504 vdd-l3-supply = <&vreg_s4c_1p8
505 vdd-s1-supply = <&vph_pwr>;
506
507 vreg_l1d_0p8: ldo1 {
508 regulator-name = "vreg
509 regulator-min-microvol
510 regulator-max-microvol
511 regulator-initial-mode
512 };
513
514 vreg_l2d_0p9: ldo2 {
515 regulator-name = "vreg
516 regulator-min-microvol
517 regulator-max-microvol
518 regulator-initial-mode
519 };
520
521 vreg_l3d_1p8: ldo3 {
522 regulator-name = "vreg
523 regulator-min-microvol
524 regulator-max-microvol
525 regulator-initial-mode
526 };
527 };
528
529 regulators-3 {
530 compatible = "qcom,pmc8380-rpm
531 qcom,pmic-id = "e";
532
533 vdd-l2-supply = <&vreg_s1f_0p7
534 vdd-l3-supply = <&vreg_s5j_1p2
535
536 vreg_l2e_0p8: ldo2 {
537 regulator-name = "vreg
538 regulator-min-microvol
539 regulator-max-microvol
540 regulator-initial-mode
541 };
542
543 vreg_l3e_1p2: ldo3 {
544 regulator-name = "vreg
545 regulator-min-microvol
546 regulator-max-microvol
547 regulator-initial-mode
548 };
549 };
550
551 regulators-4 {
552 compatible = "qcom,pmc8380-rpm
553 qcom,pmic-id = "f";
554
555 vdd-l1-supply = <&vreg_s5j_1p2
556 vdd-l2-supply = <&vreg_s5j_1p2
557 vdd-l3-supply = <&vreg_s5j_1p2
558 vdd-s1-supply = <&vph_pwr>;
559
560 vreg_s1f_0p7: smps1 {
561 regulator-name = "vreg
562 regulator-min-microvol
563 regulator-max-microvol
564 regulator-initial-mode
565 };
566
567 vreg_l1f_1p0: ldo1 {
568 regulator-name = "vreg
569 regulator-min-microvol
570 regulator-max-microvol
571 regulator-initial-mode
572 };
573
574 vreg_l2f_1p0: ldo2 {
575 regulator-name = "vreg
576 regulator-min-microvol
577 regulator-max-microvol
578 regulator-initial-mode
579 };
580
581 vreg_l3f_1p0: ldo3 {
582 regulator-name = "vreg
583 regulator-min-microvol
584 regulator-max-microvol
585 regulator-initial-mode
586 };
587 };
588
589 regulators-6 {
590 compatible = "qcom,pm8550ve-rp
591 qcom,pmic-id = "i";
592
593 vdd-l1-supply = <&vreg_s4c_1p8
594 vdd-l2-supply = <&vreg_s5j_1p2
595 vdd-l3-supply = <&vreg_s1f_0p7
596 vdd-s1-supply = <&vph_pwr>;
597 vdd-s2-supply = <&vph_pwr>;
598
599 vreg_s1i_0p9: smps1 {
600 regulator-name = "vreg
601 regulator-min-microvol
602 regulator-max-microvol
603 regulator-initial-mode
604 };
605
606 vreg_s2i_1p0: smps2 {
607 regulator-name = "vreg
608 regulator-min-microvol
609 regulator-max-microvol
610 regulator-initial-mode
611 };
612
613 vreg_l1i_1p8: ldo1 {
614 regulator-name = "vreg
615 regulator-min-microvol
616 regulator-max-microvol
617 regulator-initial-mode
618 };
619
620 vreg_l2i_1p2: ldo2 {
621 regulator-name = "vreg
622 regulator-min-microvol
623 regulator-max-microvol
624 regulator-initial-mode
625 };
626
627 vreg_l3i_0p8: ldo3 {
628 regulator-name = "vreg
629 regulator-min-microvol
630 regulator-max-microvol
631 regulator-initial-mode
632 };
633 };
634
635 regulators-7 {
636 compatible = "qcom,pm8550ve-rp
637 qcom,pmic-id = "j";
638
639 vdd-l1-supply = <&vreg_s1f_0p7
640 vdd-l2-supply = <&vreg_s5j_1p2
641 vdd-l3-supply = <&vreg_s1f_0p7
642 vdd-s5-supply = <&vph_pwr>;
643
644 vreg_s5j_1p2: smps5 {
645 regulator-name = "vreg
646 regulator-min-microvol
647 regulator-max-microvol
648 regulator-initial-mode
649 };
650
651 vreg_l1j_0p8: ldo1 {
652 regulator-name = "vreg
653 regulator-min-microvol
654 regulator-max-microvol
655 regulator-initial-mode
656 };
657
658 vreg_l2j_1p2: ldo2 {
659 regulator-name = "vreg
660 regulator-min-microvol
661 regulator-max-microvol
662 regulator-initial-mode
663 };
664
665 vreg_l3j_0p8: ldo3 {
666 regulator-name = "vreg
667 regulator-min-microvol
668 regulator-max-microvol
669 regulator-initial-mode
670 };
671 };
672 };
673
674 &gpu {
675 status = "okay";
676
677 zap-shader {
678 firmware-name = "qcom/x1e80100
679 };
680 };
681
682 &i2c0 {
683 clock-frequency = <400000>;
684
685 status = "okay";
686
687 touchpad@15 {
688 compatible = "hid-over-i2c";
689 reg = <0x15>;
690
691 hid-descr-addr = <0x1>;
692 interrupts-extended = <&tlmm 3
693
694 pinctrl-0 = <&tpad_default>;
695 pinctrl-names = "default";
696
697 wakeup-source;
698 };
699
700 keyboard@3a {
701 compatible = "hid-over-i2c";
702 reg = <0x3a>;
703
704 hid-descr-addr = <0x1>;
705 interrupts-extended = <&tlmm 6
706
707 pinctrl-0 = <&kybd_default>;
708 pinctrl-names = "default";
709
710 wakeup-source;
711 };
712 };
713
714 &i2c8 {
715 clock-frequency = <400000>;
716
717 status = "okay";
718
719 touchscreen@10 {
720 compatible = "hid-over-i2c";
721 reg = <0x10>;
722
723 hid-descr-addr = <0x1>;
724 interrupts-extended = <&tlmm 5
725
726 pinctrl-0 = <&ts0_default>;
727 pinctrl-names = "default";
728 };
729 };
730
731 &lpass_tlmm {
732 spkr_01_sd_n_active: spkr-01-sd-n-acti
733 pins = "gpio12";
734 function = "gpio";
735 drive-strength = <16>;
736 bias-disable;
737 output-low;
738 };
739
740 spkr_23_sd_n_active: spkr-23-sd-n-acti
741 pins = "gpio13";
742 function = "gpio";
743 drive-strength = <16>;
744 bias-disable;
745 output-low;
746 };
747 };
748
749 &lpass_vamacro {
750 pinctrl-0 = <&dmic01_default>, <&dmic2
751 pinctrl-names = "default";
752
753 vdd-micb-supply = <&vreg_l1b_1p8>;
754 qcom,dmic-sample-rate = <4800000>;
755 };
756
757 &mdss {
758 status = "okay";
759 };
760
761 &mdss_dp3 {
762 compatible = "qcom,x1e80100-dp";
763 /delete-property/ #sound-dai-cells;
764
765 status = "okay";
766
767 aux-bus {
768 panel {
769 compatible = "samsung,
770 enable-gpios = <&pmc83
771 power-supply = <&vreg_
772
773 pinctrl-0 = <&edp_bl_e
774 pinctrl-names = "defau
775
776 port {
777 edp_panel_in:
778 remote
779 };
780 };
781 };
782 };
783
784 ports {
785 port@1 {
786 reg = <1>;
787 mdss_dp3_out: endpoint
788 data-lanes = <
789 link-frequenci
790
791 remote-endpoin
792 };
793 };
794 };
795 };
796
797 &mdss_dp3_phy {
798 vdda-phy-supply = <&vreg_l3j_0p8>;
799 vdda-pll-supply = <&vreg_l2j_1p2>;
800
801 status = "okay";
802 };
803
804 &pcie4 {
805 perst-gpios = <&tlmm 146 GPIO_ACTIVE_L
806 wake-gpios = <&tlmm 148 GPIO_ACTIVE_LO
807
808 pinctrl-0 = <&pcie4_default>;
809 pinctrl-names = "default";
810
811 status = "okay";
812 };
813
814 &pcie4_phy {
815 vdda-phy-supply = <&vreg_l3i_0p8>;
816 vdda-pll-supply = <&vreg_l3e_1p2>;
817
818 status = "okay";
819 };
820
821 &pcie5 {
822 perst-gpios = <&tlmm 149 GPIO_ACTIVE_L
823 wake-gpios = <&tlmm 151 GPIO_ACTIVE_LO
824
825 vddpe-3v3-supply = <&vreg_wwan>;
826
827 pinctrl-0 = <&pcie5_default>;
828 pinctrl-names = "default";
829
830 status = "okay";
831 };
832
833 &pcie5_phy {
834 vdda-phy-supply = <&vreg_l3i_0p8>;
835 vdda-pll-supply = <&vreg_l3e_1p2>;
836
837 status = "okay";
838 };
839
840 &pcie6a {
841 perst-gpios = <&tlmm 152 GPIO_ACTIVE_L
842 wake-gpios = <&tlmm 154 GPIO_ACTIVE_LO
843
844 vddpe-3v3-supply = <&vreg_nvme>;
845
846 pinctrl-names = "default";
847 pinctrl-0 = <&pcie6a_default>;
848
849 status = "okay";
850 };
851
852 &pcie6a_phy {
853 vdda-phy-supply = <&vreg_l1d_0p8>;
854 vdda-pll-supply = <&vreg_l2j_1p2>;
855
856 status = "okay";
857 };
858
859 &pmc8380_3_gpios {
860 edp_bl_en: edp-bl-en-state {
861 pins = "gpio4";
862 function = "normal";
863 power-source = <1>; /* 1.8V */
864 input-disable;
865 output-enable;
866 };
867 };
868
869 &qupv3_0 {
870 status = "okay";
871 };
872
873 &qupv3_1 {
874 status = "okay";
875 };
876
877 &qupv3_2 {
878 status = "okay";
879 };
880
881 &remoteproc_adsp {
882 firmware-name = "qcom/x1e80100/adsp.mb
883 "qcom/x1e80100/adsp_dt
884
885 status = "okay";
886 };
887
888 &remoteproc_cdsp {
889 firmware-name = "qcom/x1e80100/cdsp.mb
890 "qcom/x1e80100/cdsp_dt
891
892 status = "okay";
893 };
894
895 &smb2360_0_eusb2_repeater {
896 vdd18-supply = <&vreg_l3d_1p8>;
897 vdd3-supply = <&vreg_l2b_3p0>;
898 };
899
900 &smb2360_1_eusb2_repeater {
901 vdd18-supply = <&vreg_l3d_1p8>;
902 vdd3-supply = <&vreg_l14b_3p0>;
903 };
904
905 &smb2360_2 {
906 status = "okay";
907 };
908
909 &smb2360_2_eusb2_repeater {
910 vdd18-supply = <&vreg_l3d_1p8>;
911 vdd3-supply = <&vreg_l8b_3p0>;
912 };
913
914 &swr0 {
915 status = "okay";
916
917 pinctrl-0 = <&wsa_swr_active>, <&spkr_
918 pinctrl-names = "default";
919
920 /* WSA8845, Left Woofer */
921 left_woofer: speaker@0,0 {
922 compatible = "sdw20217020400";
923 reg = <0 0>;
924 reset-gpios = <&lpass_tlmm 12
925 #sound-dai-cells = <0>;
926 sound-name-prefix = "WooferLef
927 vdd-1p8-supply = <&vreg_l15b_1
928 vdd-io-supply = <&vreg_l12b_1p
929 qcom,port-mapping = <1 2 3 7 1
930 };
931
932 /* WSA8845, Left Tweeter */
933 left_tweeter: speaker@0,1 {
934 compatible = "sdw20217020400";
935 reg = <0 1>;
936 reset-gpios = <&lpass_tlmm 12
937 #sound-dai-cells = <0>;
938 sound-name-prefix = "TweeterLe
939 vdd-1p8-supply = <&vreg_l15b_1
940 vdd-io-supply = <&vreg_l12b_1p
941 qcom,port-mapping = <4 5 6 7 1
942 };
943 };
944
945 &swr1 {
946 status = "okay";
947
948 /* WCD9385 RX */
949 wcd_rx: codec@0,4 {
950 compatible = "sdw20217010d00";
951 reg = <0 4>;
952 qcom,rx-port-mapping = <1 2 3
953 };
954 };
955
956 &swr2 {
957 status = "okay";
958
959 /* WCD9385 TX */
960 wcd_tx: codec@0,3 {
961 compatible = "sdw20217010d00";
962 reg = <0 3>;
963 qcom,tx-port-mapping = <2 2 3
964 };
965 };
966
967 &swr3 {
968 status = "okay";
969
970 pinctrl-0 = <&wsa2_swr_active>, <&spkr
971 pinctrl-names = "default";
972
973 /* WSA8845, Right Woofer */
974 right_woofer: speaker@0,0 {
975 compatible = "sdw20217020400";
976 reg = <0 0>;
977 reset-gpios = <&lpass_tlmm 13
978 #sound-dai-cells = <0>;
979 sound-name-prefix = "WooferRig
980 vdd-1p8-supply = <&vreg_l15b_1
981 vdd-io-supply = <&vreg_l12b_1p
982 qcom,port-mapping = <1 2 3 7 1
983 };
984
985 /* WSA8845, Right Tweeter */
986 right_tweeter: speaker@0,1 {
987 compatible = "sdw20217020400";
988 reg = <0 1>;
989 reset-gpios = <&lpass_tlmm 13
990 #sound-dai-cells = <0>;
991 sound-name-prefix = "TweeterRi
992 vdd-1p8-supply = <&vreg_l15b_1
993 vdd-io-supply = <&vreg_l12b_1p
994 qcom,port-mapping = <4 5 6 7 1
995 };
996 };
997
998 &tlmm {
999 gpio-reserved-ranges = <34 2>, /* Unus
1000 <44 4>, /* SPI
1001 <238 1>; /* UF
1002
1003 edp_reg_en: edp-reg-en-state {
1004 pins = "gpio70";
1005 function = "gpio";
1006 drive-strength = <16>;
1007 bias-disable;
1008 };
1009
1010 hall_int_n_default: hall-int-n-state
1011 pins = "gpio92";
1012 function = "gpio";
1013 bias-disable;
1014 };
1015
1016 kybd_default: kybd-default-state {
1017 pins = "gpio67";
1018 function = "gpio";
1019 bias-disable;
1020 };
1021
1022 nvme_reg_en: nvme-reg-en-state {
1023 pins = "gpio18";
1024 function = "gpio";
1025 drive-strength = <2>;
1026 bias-disable;
1027 };
1028
1029 pcie4_default: pcie4-default-state {
1030 clkreq-n-pins {
1031 pins = "gpio147";
1032 function = "pcie4_clk
1033 drive-strength = <2>;
1034 bias-pull-up;
1035 };
1036
1037 perst-n-pins {
1038 pins = "gpio146";
1039 function = "gpio";
1040 drive-strength = <2>;
1041 bias-disable;
1042 };
1043
1044 wake-n-pins {
1045 pins = "gpio148";
1046 function = "gpio";
1047 drive-strength = <2>;
1048 bias-pull-up;
1049 };
1050 };
1051
1052 pcie5_default: pcie5-default-state {
1053 clkreq-n-pins {
1054 pins = "gpio150";
1055 function = "pcie5_clk
1056 drive-strength = <2>;
1057 bias-pull-up;
1058 };
1059
1060 perst-n-pins {
1061 pins = "gpio149";
1062 function = "gpio";
1063 drive-strength = <2>;
1064 bias-disable;
1065 };
1066
1067 wake-n-pins {
1068 pins = "gpio151";
1069 function = "gpio";
1070 drive-strength = <2>;
1071 bias-pull-up;
1072 };
1073 };
1074
1075 pcie6a_default: pcie6a-default-state
1076 clkreq-n-pins {
1077 pins = "gpio153";
1078 function = "pcie6a_cl
1079 drive-strength = <2>;
1080 bias-pull-up;
1081 };
1082
1083 perst-n-pins {
1084 pins = "gpio152";
1085 function = "gpio";
1086 drive-strength = <2>;
1087 bias-disable;
1088 };
1089
1090 wake-n-pins {
1091 pins = "gpio154";
1092 function = "gpio";
1093 drive-strength = <2>;
1094 bias-pull-up;
1095 };
1096 };
1097
1098 tpad_default: tpad-default-state {
1099 pins = "gpio3";
1100 function = "gpio";
1101 bias-disable;
1102 };
1103
1104 ts0_default: ts0-default-state {
1105 int-n-pins {
1106 pins = "gpio51";
1107 function = "gpio";
1108 bias-disable;
1109 };
1110
1111 reset-n-pins {
1112 pins = "gpio48";
1113 function = "gpio";
1114 output-high;
1115 drive-strength = <16>
1116 };
1117 };
1118
1119 wcd_default: wcd-reset-n-active-state
1120 pins = "gpio191";
1121 function = "gpio";
1122 drive-strength = <16>;
1123 bias-disable;
1124 output-low;
1125 };
1126
1127 wwan_sw_en: wwan-sw-en-state {
1128 pins = "gpio221";
1129 function = "gpio";
1130 drive-strength = <4>;
1131 bias-disable;
1132 };
1133 };
1134
1135 &uart21 {
1136 compatible = "qcom,geni-debug-uart";
1137 status = "okay";
1138 };
1139
1140 &usb_1_ss0_hsphy {
1141 vdd-supply = <&vreg_l3j_0p8>;
1142 vdda12-supply = <&vreg_l2j_1p2>;
1143
1144 phys = <&smb2360_0_eusb2_repeater>;
1145
1146 status = "okay";
1147 };
1148
1149 &usb_1_ss0_qmpphy {
1150 vdda-phy-supply = <&vreg_l3e_1p2>;
1151 vdda-pll-supply = <&vreg_l1j_0p8>;
1152
1153 status = "okay";
1154 };
1155
1156 &usb_1_ss0 {
1157 status = "okay";
1158 };
1159
1160 &usb_1_ss0_dwc3 {
1161 dr_mode = "host";
1162 };
1163
1164 &usb_1_ss0_dwc3_hs {
1165 remote-endpoint = <&pmic_glink_ss0_hs
1166 };
1167
1168 &usb_1_ss0_qmpphy_out {
1169 remote-endpoint = <&pmic_glink_ss0_ss
1170 };
1171
1172 &usb_1_ss1_hsphy {
1173 vdd-supply = <&vreg_l3j_0p8>;
1174 vdda12-supply = <&vreg_l2j_1p2>;
1175
1176 phys = <&smb2360_1_eusb2_repeater>;
1177
1178 status = "okay";
1179 };
1180
1181 &usb_1_ss1_qmpphy {
1182 vdda-phy-supply = <&vreg_l3e_1p2>;
1183 vdda-pll-supply = <&vreg_l2d_0p9>;
1184
1185 status = "okay";
1186 };
1187
1188 &usb_1_ss1 {
1189 status = "okay";
1190 };
1191
1192 &usb_1_ss1_dwc3 {
1193 dr_mode = "host";
1194 };
1195
1196 &usb_1_ss1_dwc3_hs {
1197 remote-endpoint = <&pmic_glink_ss1_hs
1198 };
1199
1200 &usb_1_ss1_qmpphy_out {
1201 remote-endpoint = <&pmic_glink_ss1_ss
1202 };
1203
1204 &usb_1_ss2_hsphy {
1205 vdd-supply = <&vreg_l3j_0p8>;
1206 vdda12-supply = <&vreg_l2j_1p2>;
1207
1208 phys = <&smb2360_2_eusb2_repeater>;
1209
1210 status = "okay";
1211 };
1212
1213 &usb_1_ss2_qmpphy {
1214 vdda-phy-supply = <&vreg_l3e_1p2>;
1215 vdda-pll-supply = <&vreg_l2d_0p9>;
1216
1217 status = "okay";
1218 };
1219
1220 &usb_1_ss2 {
1221 status = "okay";
1222 };
1223
1224 &usb_1_ss2_dwc3 {
1225 dr_mode = "host";
1226 };
1227
1228 &usb_1_ss2_dwc3_hs {
1229 remote-endpoint = <&pmic_glink_ss2_hs
1230 };
1231
1232 &usb_1_ss2_qmpphy_out {
1233 remote-endpoint = <&pmic_glink_ss2_ss
1234 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.