1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Device Tree Source for the Draak board
4 *
5 * Copyright (C) 2016-2018 Renesas Electronics
6 * Copyright (C) 2017 Glider bvba
7 */
8
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
11
12 / {
13 model = "Renesas Draak board";
14 compatible = "renesas,draak";
15
16 aliases {
17 serial0 = &scif2;
18 ethernet0 = &avb;
19 };
20
21 audio_clkout: audio-clkout {
22 /*
23 * This is same as <&rcar_soun
24 * but needed to avoid cs2000/
25 */
26 compatible = "fixed-clock";
27 #clock-cells = <0>;
28 clock-frequency = <12288000>;
29 };
30
31 backlight: backlight {
32 compatible = "pwm-backlight";
33 pwms = <&pwm1 0 50000>;
34
35 brightness-levels = <512 511 5
36 default-brightness-level = <10
37
38 power-supply = <®_12p0v>;
39 enable-gpios = <&gpio4 0 GPIO_
40 };
41
42 chosen {
43 bootargs = "ignore_loglevel rw
44 stdout-path = "serial0:115200n
45 };
46
47 composite-in {
48 compatible = "composite-video-
49
50 port {
51 composite_con_in: endp
52 remote-endpoin
53 };
54 };
55 };
56
57 hdmi-in {
58 compatible = "hdmi-connector";
59 type = "a";
60
61 port {
62 hdmi_con_in: endpoint
63 remote-endpoin
64 };
65 };
66 };
67
68 hdmi-out {
69 compatible = "hdmi-connector";
70 type = "a";
71
72 port {
73 hdmi_con_out: endpoint
74 remote-endpoin
75 };
76 };
77 };
78
79 keys {
80 compatible = "gpio-keys";
81
82 pinctrl-0 = <&keys_pins>;
83 pinctrl-names = "default";
84
85 key-1 {
86 gpios = <&gpio4 12 GPI
87 linux,code = <KEY_1>;
88 label = "SW56-1";
89 wakeup-source;
90 debounce-interval = <2
91 };
92 key-2 {
93 gpios = <&gpio4 13 GPI
94 linux,code = <KEY_2>;
95 label = "SW56-2";
96 wakeup-source;
97 debounce-interval = <2
98 };
99 key-3 {
100 gpios = <&gpio4 14 GPI
101 linux,code = <KEY_3>;
102 label = "SW56-3";
103 wakeup-source;
104 debounce-interval = <2
105 };
106 key-4 {
107 gpios = <&gpio4 15 GPI
108 linux,code = <KEY_4>;
109 label = "SW56-4";
110 wakeup-source;
111 debounce-interval = <2
112 };
113 };
114
115 lvds-decoder {
116 compatible = "thine,thc63lvd10
117 vcc-supply = <®_3p3v>;
118
119 ports {
120 #address-cells = <1>;
121 #size-cells = <0>;
122
123 port@0 {
124 reg = <0>;
125 thc63lvd1024_i
126 remote
127 };
128 };
129
130 port@2 {
131 reg = <2>;
132 thc63lvd1024_o
133 remote
134 };
135 };
136 };
137 };
138
139 memory@48000000 {
140 device_type = "memory";
141 /* first 128MB is reserved for
142 reg = <0x0 0x48000000 0x0 0x18
143 };
144
145 reg_1p8v: regulator-1p8v {
146 compatible = "regulator-fixed"
147 regulator-name = "fixed-1.8V";
148 regulator-min-microvolt = <180
149 regulator-max-microvolt = <180
150 regulator-boot-on;
151 regulator-always-on;
152 };
153
154 reg_3p3v: regulator-3p3v {
155 compatible = "regulator-fixed"
156 regulator-name = "fixed-3.3V";
157 regulator-min-microvolt = <330
158 regulator-max-microvolt = <330
159 regulator-boot-on;
160 regulator-always-on;
161 };
162
163 reg_12p0v: regulator-12p0v {
164 compatible = "regulator-fixed"
165 regulator-name = "D12.0V";
166 regulator-min-microvolt = <120
167 regulator-max-microvolt = <120
168 regulator-boot-on;
169 regulator-always-on;
170 };
171
172 sound_card: sound {
173 compatible = "audio-graph-card
174
175 dais = <&rsnd_port0 /* ak4
176 /* HDMI is not yet sup
177 >;
178 };
179
180 vga {
181 compatible = "vga-connector";
182
183 port {
184 vga_in: endpoint {
185 remote-endpoin
186 };
187 };
188 };
189
190 vga-encoder {
191 compatible = "adi,adv7123";
192
193 ports {
194 #address-cells = <1>;
195 #size-cells = <0>;
196
197 port@0 {
198 reg = <0>;
199 adv7123_in: en
200 remote
201 };
202 };
203 port@1 {
204 reg = <1>;
205 adv7123_out: e
206 remote
207 };
208 };
209 };
210 };
211
212 x12_clk: x12 {
213 compatible = "fixed-clock";
214 #clock-cells = <0>;
215 clock-frequency = <74250000>;
216 };
217
218 x19_clk: x19 {
219 compatible = "fixed-clock";
220 #clock-cells = <0>;
221 clock-frequency = <24576000>;
222 };
223 };
224
225 &audio_clk_b {
226 /*
227 * X11 is connected to VI4_FIELD/SCIF_
228 * and R-Car Sound uses AUDIO_CLKB.
229 * Note is that schematic indicates VI
230 * not AUDIO_CLKB at SoC page.
231 * And this VI4_FIELD/SCIF_CLK/AUDIO_C
232 * SW60 should be 1-2.
233 */
234
235 clock-frequency = <22579200>;
236 };
237
238 &avb {
239 pinctrl-0 = <&avb0_pins>;
240 pinctrl-names = "default";
241 renesas,no-ether-link;
242 phy-handle = <&phy0>;
243 status = "okay";
244
245 phy0: ethernet-phy@0 {
246 compatible = "ethernet-phy-id0
247 "ethernet-phy-iee
248 rxc-skew-ps = <1500>;
249 reg = <0>;
250 interrupt-parent = <&gpio5>;
251 interrupts = <19 IRQ_TYPE_LEVE
252 reset-gpios = <&gpio5 18 GPIO_
253 /*
254 * TX clock internal delay mod
255 * 1Gbps communication using t
256 * the Draak board, however, T
257 * isn't supported on R-Car D3
258 * 100Mbps for reliable commun
259 */
260 max-speed = <100>;
261 };
262 };
263
264 &can0 {
265 pinctrl-0 = <&can0_pins>;
266 pinctrl-names = "default";
267 status = "okay";
268 };
269
270 &can1 {
271 pinctrl-0 = <&can1_pins>;
272 pinctrl-names = "default";
273 status = "okay";
274 };
275
276 &du {
277 pinctrl-0 = <&du_pins>;
278 pinctrl-names = "default";
279 status = "okay";
280
281 clocks = <&cpg CPG_MOD 724>,
282 <&cpg CPG_MOD 723>,
283 <&x12_clk>;
284 clock-names = "du.0", "du.1", "dclkin.
285
286 ports {
287 port@0 {
288 du_out_rgb: endpoint {
289 remote-endpoin
290 };
291 };
292 };
293 };
294
295 &ehci0 {
296 dr_mode = "host";
297 status = "okay";
298 };
299
300 &extal_clk {
301 clock-frequency = <48000000>;
302 };
303
304 &hsusb {
305 dr_mode = "host";
306 status = "okay";
307 };
308
309 &i2c0 {
310 pinctrl-0 = <&i2c0_pins>;
311 pinctrl-names = "default";
312 status = "okay";
313
314 ak4613: codec@10 {
315 compatible = "asahi-kasei,ak46
316 #sound-dai-cells = <0>;
317 reg = <0x10>;
318 clocks = <&rcar_sound 0>; /* a
319
320 asahi-kasei,in1-single-end;
321 asahi-kasei,in2-single-end;
322 asahi-kasei,out1-single-end;
323 asahi-kasei,out2-single-end;
324 asahi-kasei,out3-single-end;
325 asahi-kasei,out4-single-end;
326 asahi-kasei,out5-single-end;
327 asahi-kasei,out6-single-end;
328
329 port {
330 ak4613_endpoint: endpo
331 remote-endpoin
332 };
333 };
334 };
335
336 composite-in@20 {
337 compatible = "adi,adv7180cp";
338 reg = <0x20>;
339
340 ports {
341 #address-cells = <1>;
342 #size-cells = <0>;
343
344 port@0 {
345 reg = <0>;
346 adv7180_in: en
347 remote
348 };
349 };
350
351 port@3 {
352 reg = <3>;
353
354 /*
355 * The VIN4 vi
356 * CVBS and HD
357 * switches.
358 *
359 * HDMI is the
360 * not connect
361 */
362 };
363 };
364
365 };
366
367 hdmi-encoder@39 {
368 compatible = "adi,adv7511w";
369 reg = <0x39>, <0x3f>, <0x3c>,
370 reg-names = "main", "edid", "c
371 interrupt-parent = <&gpio1>;
372 interrupts = <28 IRQ_TYPE_LEVE
373
374 avdd-supply = <®_1p8v>;
375 dvdd-supply = <®_1p8v>;
376 pvdd-supply = <®_1p8v>;
377 dvdd-3v-supply = <®_3p3v>;
378 bgvdd-supply = <®_1p8v>;
379
380 adi,input-depth = <8>;
381 adi,input-colorspace = "rgb";
382 adi,input-clock = "1x";
383
384 ports {
385 #address-cells = <1>;
386 #size-cells = <0>;
387
388 port@0 {
389 reg = <0>;
390 adv7511_in: en
391 remote
392 };
393 };
394
395 port@1 {
396 reg = <1>;
397 adv7511_out: e
398 remote
399 };
400 };
401 };
402 };
403
404 hdmi-decoder@4c {
405 compatible = "adi,adv7612";
406 reg = <0x4c>;
407 default-input = <0>;
408
409 ports {
410 #address-cells = <1>;
411 #size-cells = <0>;
412
413 port@0 {
414 reg = <0>;
415
416 adv7612_in: en
417 remote
418 };
419 };
420
421 port@2 {
422 reg = <2>;
423
424 /*
425 * The VIN4 vi
426 * CVBS and HD
427 * switches.
428 *
429 * HDMI is the
430 * VIN4 here.
431 */
432 adv7612_out: e
433 remote
434 };
435 };
436 };
437 };
438
439 cs2000: clk-multiplier@4f {
440 #clock-cells = <0>;
441 compatible = "cirrus,cs2000-cp
442 reg = <0x4f>;
443 clocks = <&audio_clkout>, <&x1
444 clock-names = "clk_in", "ref_c
445
446 assigned-clocks = <&cs2000>;
447 assigned-clock-rates = <245760
448 };
449
450 eeprom@50 {
451 compatible = "rohm,br24t01", "
452 reg = <0x50>;
453 pagesize = <8>;
454 };
455 };
456
457 &i2c1 {
458 pinctrl-0 = <&i2c1_pins>;
459 pinctrl-names = "default";
460 status = "okay";
461 };
462
463 &lvds0 {
464 status = "okay";
465
466 clocks = <&cpg CPG_MOD 727>,
467 <&x12_clk>,
468 <&extal_clk>;
469 clock-names = "fck", "dclkin.0", "exta
470
471 ports {
472 port@1 {
473 lvds0_out: endpoint {
474 remote-endpoin
475 };
476 };
477 };
478 };
479
480 &lvds1 {
481 /*
482 * Even though the LVDS1 output is not
483 * enabled to supply a pixel clock to
484 * LVDS0 is in use.
485 */
486 status = "okay";
487
488 clocks = <&cpg CPG_MOD 727>,
489 <&x12_clk>,
490 <&extal_clk>;
491 clock-names = "fck", "dclkin.0", "exta
492 };
493
494 &ohci0 {
495 dr_mode = "host";
496 status = "okay";
497 };
498
499 &pfc {
500 avb0_pins: avb {
501 groups = "avb0_link", "avb0_md
502 function = "avb0";
503 };
504
505 can0_pins: can0 {
506 groups = "can0_data_a";
507 function = "can0";
508 };
509
510 can1_pins: can1 {
511 groups = "can1_data_a";
512 function = "can1";
513 };
514
515 du_pins: du {
516 groups = "du_rgb888", "du_sync
517 function = "du";
518 };
519
520 i2c0_pins: i2c0 {
521 groups = "i2c0";
522 function = "i2c0";
523 };
524
525 i2c1_pins: i2c1 {
526 groups = "i2c1";
527 function = "i2c1";
528 };
529
530 keys_pins: keys {
531 pins = "GP_4_12", "GP_4_13", "
532 bias-pull-up;
533 };
534
535 pwm0_pins: pwm0 {
536 groups = "pwm0_c";
537 function = "pwm0";
538 };
539
540 pwm1_pins: pwm1 {
541 groups = "pwm1_c";
542 function = "pwm1";
543 };
544
545 rpc_pins: rpc {
546 groups = "rpc_clk2", "rpc_ctrl
547 "rpc_int";
548 function = "rpc";
549 };
550
551 scif2_pins: scif2 {
552 groups = "scif2_data";
553 function = "scif2";
554 };
555
556 sdhi2_pins: sd2 {
557 groups = "mmc_data8", "mmc_ctr
558 function = "mmc";
559 power-source = <1800>;
560 };
561
562 sdhi2_pins_uhs: sd2_uhs {
563 groups = "mmc_data8", "mmc_ctr
564 function = "mmc";
565 power-source = <1800>;
566 };
567
568 sound_pins: sound {
569 groups = "ssi34_ctrl", "ssi3_d
570 function = "ssi";
571 };
572
573 sound_clk_pins: sound-clk {
574 groups = "audio_clk_a", "audio
575 "audio_clkout", "audi
576 function = "audio_clk";
577 };
578
579 usb0_pins: usb0 {
580 groups = "usb0";
581 function = "usb0";
582 };
583
584 vin4_pins: vin4 {
585 groups = "vin4_data24", "vin4_
586 function = "vin4";
587 };
588 };
589
590 &pwm0 {
591 pinctrl-0 = <&pwm0_pins>;
592 pinctrl-names = "default";
593
594 status = "okay";
595 };
596
597 &pwm1 {
598 pinctrl-0 = <&pwm1_pins>;
599 pinctrl-names = "default";
600
601 status = "okay";
602 };
603
604 &rcar_sound {
605 pinctrl-0 = <&sound_pins>, <&sound_clk
606 pinctrl-names = "default";
607
608 /* Single DAI */
609 #sound-dai-cells = <0>;
610
611 /* audio_clkout0/1 */
612 #clock-cells = <1>;
613 clock-frequency = <12288000 11289600>;
614
615 status = "okay";
616
617 clocks = <&cpg CPG_MOD 1005>,
618 <&cpg CPG_MOD 1011>, <&cpg CP
619 <&cpg CPG_MOD 1025>, <&cpg CP
620 <&cpg CPG_MOD 1020>, <&cpg CP
621 <&cpg CPG_MOD 1020>, <&cpg CP
622 <&cpg CPG_MOD 1019>, <&cpg CP
623 <&cs2000>, <&audio_clk_b>,
624 <&cpg CPG_CORE R8A77995_CLK_Z
625
626 ports {
627 rsnd_port0: port {
628 rsnd_for_ak4613: endpo
629 remote-endpoin
630 dai-format = "
631 bitclock-maste
632 frame-master =
633 playback = <&s
634 capture = <&ss
635 };
636 };
637 };
638 };
639
640 &rpc {
641 pinctrl-0 = <&rpc_pins>;
642 pinctrl-names = "default";
643
644 /* Left disabled. To be enabled by fi
645
646 flash@0 {
647 compatible = "cypress,hyperfla
648 reg = <0>;
649
650 partitions {
651 compatible = "fixed-pa
652 #address-cells = <1>;
653 #size-cells = <1>;
654
655 bootparam@0 {
656 reg = <0x00000
657 read-only;
658 };
659 bl2@40000 {
660 reg = <0x00040
661 read-only;
662 };
663 cert_header_sa6@180000
664 reg = <0x00180
665 read-only;
666 };
667 bl31@1c0000 {
668 reg = <0x001c0
669 read-only;
670 };
671 tee@200000 {
672 reg = <0x00200
673 read-only;
674 };
675 uboot@640000 {
676 reg = <0x00640
677 read-only;
678 };
679 dtb@740000 {
680 reg = <0x00740
681 };
682 kernel@7c0000 {
683 reg = <0x007c0
684 };
685 user@1bc0000 {
686 reg = <0x01bc0
687 };
688 };
689 };
690 };
691
692 &rwdt {
693 timeout-sec = <60>;
694 status = "okay";
695 };
696
697 &scif2 {
698 pinctrl-0 = <&scif2_pins>;
699 pinctrl-names = "default";
700
701 status = "okay";
702 };
703
704 &sdhi2 {
705 /* used for on-board eMMC */
706 pinctrl-0 = <&sdhi2_pins>;
707 pinctrl-1 = <&sdhi2_pins_uhs>;
708 pinctrl-names = "default", "state_uhs"
709
710 vmmc-supply = <®_3p3v>;
711 vqmmc-supply = <®_1p8v>;
712 bus-width = <8>;
713 mmc-hs200-1_8v;
714 no-sd;
715 no-sdio;
716 non-removable;
717 status = "okay";
718 };
719
720 &ssi4 {
721 shared-pin;
722 };
723
724 &usb2_phy0 {
725 pinctrl-0 = <&usb0_pins>;
726 pinctrl-names = "default";
727
728 renesas,no-otg-pins;
729 status = "okay";
730 };
731
732 &vin4 {
733 pinctrl-0 = <&vin4_pins>;
734 pinctrl-names = "default";
735
736 status = "okay";
737
738 ports {
739 port {
740 vin4_in: endpoint {
741 pclk-sample =
742 hsync-active =
743 vsync-active =
744 remote-endpoin
745 };
746 };
747 };
748 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.