1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /* 2 /*
3 * Copyright (c) 2019 Hardkernel Co., Ltd 3 * Copyright (c) 2019 Hardkernel Co., Ltd
4 * Copyright (c) 2020 Theobroma Systems Design 4 * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
5 * Copyright (c) 2022 Maya Matuszczyk <maccraft <<
6 */ 5 */
7 6
8 /dts-v1/; 7 /dts-v1/;
9 #include "rk3326-odroid-go.dtsi" !! 8 #include <dt-bindings/gpio/gpio.h>
>> 9 #include <dt-bindings/input/input.h>
>> 10 #include <dt-bindings/pinctrl/rockchip.h>
>> 11 #include "rk3326.dtsi"
10 12
11 / { 13 / {
12 model = "ODROID-GO Advance"; 14 model = "ODROID-GO Advance";
13 compatible = "hardkernel,rk3326-odroid 15 compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
14 16
15 analog_sticks: adc-joystick { !! 17 chosen {
>> 18 stdout-path = "serial2:115200n8";
>> 19 };
>> 20
>> 21 adc-joystick {
16 compatible = "adc-joystick"; 22 compatible = "adc-joystick";
17 io-channels = <&saradc 1>, 23 io-channels = <&saradc 1>,
18 <&saradc 2>; 24 <&saradc 2>;
19 poll-interval = <60>; <<
20 #address-cells = <1>; 25 #address-cells = <1>;
21 #size-cells = <0>; 26 #size-cells = <0>;
22 27
23 axis@0 { 28 axis@0 {
24 reg = <0>; 29 reg = <0>;
25 abs-flat = <10>; 30 abs-flat = <10>;
26 abs-fuzz = <10>; 31 abs-fuzz = <10>;
27 abs-range = <172 772>; 32 abs-range = <172 772>;
28 linux,code = <ABS_X>; 33 linux,code = <ABS_X>;
29 }; 34 };
30 35
31 axis@1 { 36 axis@1 {
32 reg = <1>; 37 reg = <1>;
33 abs-flat = <10>; 38 abs-flat = <10>;
34 abs-fuzz = <10>; 39 abs-fuzz = <10>;
35 abs-range = <278 815>; 40 abs-range = <278 815>;
36 linux,code = <ABS_Y>; 41 linux,code = <ABS_Y>;
37 }; 42 };
38 }; 43 };
39 44
40 battery: battery { !! 45 backlight: backlight {
41 compatible = "simple-battery"; !! 46 compatible = "pwm-backlight";
42 charge-full-design-microamp-ho !! 47 power-supply = <&vcc_bl>;
43 charge-term-current-microamp = !! 48 pwms = <&pwm1 0 25000 0>;
44 constant-charge-current-max-mi !! 49 };
45 constant-charge-voltage-max-mi !! 50
46 factory-internal-resistance-mi !! 51 gpio-keys {
47 voltage-max-design-microvolt = !! 52 compatible = "gpio-keys";
48 voltage-min-design-microvolt = !! 53 pinctrl-names = "default";
49 !! 54 pinctrl-0 = <&btn_pins>;
50 ocv-capacity-celsius = <20>; !! 55
51 ocv-capacity-table-0 = <40469 !! 56 /*
52 <38884 !! 57 * *** ODROIDGO2-Advance Switch layout ***
53 <37681 !! 58 * |------------------------------------------------|
54 <36967 !! 59 * | sw15 sw16 |
55 <36494 !! 60 * |------------------------------------------------|
56 <35741 !! 61 * | sw1 |-------------------| sw8 |
>> 62 * | sw3 sw4 | | sw7 sw5 |
>> 63 * | sw2 | LCD Display | sw6 |
>> 64 * | | | |
>> 65 * | |-------------------| |
>> 66 * | sw9 sw10 sw11 sw12 sw13 sw14 |
>> 67 * |------------------------------------------------|
>> 68 */
>> 69
>> 70 sw1 {
>> 71 gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
>> 72 label = "DPAD-UP";
>> 73 linux,code = <BTN_DPAD_UP>;
>> 74 };
>> 75 sw2 {
>> 76 gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
>> 77 label = "DPAD-DOWN";
>> 78 linux,code = <BTN_DPAD_DOWN>;
>> 79 };
>> 80 sw3 {
>> 81 gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
>> 82 label = "DPAD-LEFT";
>> 83 linux,code = <BTN_DPAD_LEFT>;
>> 84 };
>> 85 sw4 {
>> 86 gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
>> 87 label = "DPAD-RIGHT";
>> 88 linux,code = <BTN_DPAD_RIGHT>;
>> 89 };
>> 90 sw5 {
>> 91 gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
>> 92 label = "BTN-A";
>> 93 linux,code = <BTN_EAST>;
>> 94 };
>> 95 sw6 {
>> 96 gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
>> 97 label = "BTN-B";
>> 98 linux,code = <BTN_SOUTH>;
>> 99 };
>> 100 sw7 {
>> 101 gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
>> 102 label = "BTN-Y";
>> 103 linux,code = <BTN_WEST>;
>> 104 };
>> 105 sw8 {
>> 106 gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
>> 107 label = "BTN-X";
>> 108 linux,code = <BTN_NORTH>;
>> 109 };
>> 110 sw9 {
>> 111 gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
>> 112 label = "F1";
>> 113 linux,code = <BTN_TRIGGER_HAPPY1>;
>> 114 };
>> 115 sw10 {
>> 116 gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
>> 117 label = "F2";
>> 118 linux,code = <BTN_TRIGGER_HAPPY2>;
>> 119 };
>> 120 sw11 {
>> 121 gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
>> 122 label = "F3";
>> 123 linux,code = <BTN_TRIGGER_HAPPY3>;
>> 124 };
>> 125 sw12 {
>> 126 gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
>> 127 label = "F4";
>> 128 linux,code = <BTN_TRIGGER_HAPPY4>;
>> 129 };
>> 130 sw13 {
>> 131 gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
>> 132 label = "F5";
>> 133 linux,code = <BTN_TRIGGER_HAPPY5>;
>> 134 };
>> 135 sw14 {
>> 136 gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
>> 137 label = "F6";
>> 138 linux,code = <BTN_TRIGGER_HAPPY6>;
>> 139 };
>> 140 sw15 {
>> 141 gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
>> 142 label = "TOP-LEFT";
>> 143 linux,code = <BTN_TL>;
>> 144 };
>> 145 sw16 {
>> 146 gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
>> 147 label = "TOP-RIGHT";
>> 148 linux,code = <BTN_TR>;
>> 149 };
>> 150 };
>> 151
>> 152 leds: gpio-leds {
>> 153 compatible = "gpio-leds";
>> 154 pinctrl-names = "default";
>> 155 pinctrl-0 = <&blue_led_pin>;
>> 156
>> 157 blue_led: led-0 {
>> 158 label = "blue:heartbeat";
>> 159 gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
>> 160 linux,default-trigger = "heartbeat";
>> 161 };
>> 162 };
>> 163
>> 164 vccsys: vccsys {
>> 165 compatible = "regulator-fixed";
>> 166 regulator-name = "vcc3v8_sys";
>> 167 regulator-always-on;
>> 168 regulator-min-microvolt = <3800000>;
>> 169 regulator-max-microvolt = <3800000>;
>> 170 };
>> 171
>> 172 vcc_host: vcc_host {
>> 173 compatible = "regulator-fixed";
>> 174 regulator-name = "vcc_host";
>> 175 regulator-min-microvolt = <5000000>;
>> 176 regulator-max-microvolt = <5000000>;
>> 177
>> 178 gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
>> 179 enable-active-high;
>> 180 regulator-always-on;
>> 181 vin-supply = <&vccsys>;
>> 182 };
>> 183 };
>> 184
>> 185 &cpu0 {
>> 186 cpu-supply = <&vdd_arm>;
>> 187 };
>> 188
>> 189 &cpu1 {
>> 190 cpu-supply = <&vdd_arm>;
>> 191 };
>> 192
>> 193 &cpu2 {
>> 194 cpu-supply = <&vdd_arm>;
>> 195 };
>> 196
>> 197 &cpu3 {
>> 198 cpu-supply = <&vdd_arm>;
>> 199 };
>> 200
>> 201 &cru {
>> 202 assigned-clocks = <&cru PLL_NPLL>,
>> 203 <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
>> 204 <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
>> 205 <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
>> 206 <&cru PLL_CPLL>;
>> 207
>> 208 assigned-clock-rates = <1188000000>,
>> 209 <200000000>, <200000000>,
>> 210 <150000000>, <150000000>,
>> 211 <100000000>, <200000000>,
>> 212 <17000000>;
>> 213 };
>> 214
>> 215 &display_subsystem {
>> 216 status = "okay";
>> 217 };
>> 218
>> 219 &dsi {
>> 220 status = "okay";
>> 221
>> 222 ports {
>> 223 mipi_out: port@1 {
>> 224 reg = <1>;
>> 225
>> 226 mipi_out_panel: endpoint {
>> 227 remote-endpoint = <&mipi_in_panel>;
>> 228 };
>> 229 };
>> 230 };
>> 231
>> 232 panel@0 {
>> 233 compatible = "elida,kd35t133";
>> 234 reg = <0>;
>> 235 backlight = <&backlight>;
>> 236 iovcc-supply = <&vcc_lcd>;
>> 237 reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
>> 238 vdd-supply = <&vcc_lcd>;
>> 239
>> 240 port {
>> 241 mipi_in_panel: endpoint {
>> 242 remote-endpoint = <&mipi_out_panel>;
>> 243 };
>> 244 };
>> 245 };
>> 246 };
>> 247
>> 248 &dsi_dphy {
>> 249 status = "okay";
>> 250 };
>> 251
>> 252 &gpu {
>> 253 mali-supply = <&vdd_logic>;
>> 254 status = "okay";
>> 255 };
>> 256
>> 257 &i2c0 {
>> 258 clock-frequency = <400000>;
>> 259 i2c-scl-falling-time-ns = <16>;
>> 260 i2c-scl-rising-time-ns = <280>;
>> 261 status = "okay";
>> 262
>> 263 rk817: pmic@20 {
>> 264 compatible = "rockchip,rk817";
>> 265 reg = <0x20>;
>> 266 interrupt-parent = <&gpio0>;
>> 267 interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
>> 268 pinctrl-names = "default";
>> 269 pinctrl-0 = <&pmic_int>;
>> 270 wakeup-source;
>> 271 #clock-cells = <1>;
>> 272 clock-output-names = "rk808-clkout1", "xin32k";
>> 273
>> 274 vcc1-supply = <&vccsys>;
>> 275 vcc2-supply = <&vccsys>;
>> 276 vcc3-supply = <&vccsys>;
>> 277 vcc4-supply = <&vccsys>;
>> 278 vcc5-supply = <&vccsys>;
>> 279 vcc6-supply = <&vccsys>;
>> 280 vcc7-supply = <&vccsys>;
>> 281
>> 282 regulators {
>> 283 vdd_logic: DCDC_REG1 {
>> 284 regulator-name = "vdd_logic";
>> 285 regulator-min-microvolt = <950000>;
>> 286 regulator-max-microvolt = <1150000>;
>> 287 regulator-ramp-delay = <6001>;
>> 288 regulator-always-on;
>> 289 regulator-boot-on;
>> 290
>> 291 regulator-state-mem {
>> 292 regulator-on-in-suspend;
>> 293 regulator-suspend-microvolt = <950000>;
>> 294 };
>> 295 };
>> 296
>> 297 vdd_arm: DCDC_REG2 {
>> 298 regulator-name = "vdd_arm";
>> 299 regulator-min-microvolt = <950000>;
>> 300 regulator-max-microvolt = <1350000>;
>> 301 regulator-ramp-delay = <6001>;
>> 302 regulator-always-on;
>> 303 regulator-boot-on;
>> 304
>> 305 regulator-state-mem {
>> 306 regulator-off-in-suspend;
>> 307 regulator-suspend-microvolt = <950000>;
>> 308 };
>> 309 };
>> 310
>> 311 vcc_ddr: DCDC_REG3 {
>> 312 regulator-name = "vcc_ddr";
>> 313 regulator-always-on;
>> 314 regulator-boot-on;
>> 315
>> 316 regulator-state-mem {
>> 317 regulator-on-in-suspend;
>> 318 };
>> 319 };
>> 320
>> 321 vcc_3v3: DCDC_REG4 {
>> 322 regulator-name = "vcc_3v3";
>> 323 regulator-min-microvolt = <3300000>;
>> 324 regulator-max-microvolt = <3300000>;
>> 325 regulator-always-on;
>> 326 regulator-boot-on;
>> 327
>> 328 regulator-state-mem {
>> 329 regulator-off-in-suspend;
>> 330 regulator-suspend-microvolt = <3300000>;
>> 331 };
>> 332 };
>> 333
>> 334 vcc_1v8: LDO_REG2 {
>> 335 regulator-name = "vcc_1v8";
>> 336 regulator-min-microvolt = <1800000>;
>> 337 regulator-max-microvolt = <1800000>;
>> 338 regulator-always-on;
>> 339 regulator-boot-on;
>> 340
>> 341 regulator-state-mem {
>> 342 regulator-on-in-suspend;
>> 343 regulator-suspend-microvolt = <1800000>;
>> 344 };
>> 345 };
>> 346
>> 347 vdd_1v0: LDO_REG3 {
>> 348 regulator-name = "vdd_1v0";
>> 349 regulator-min-microvolt = <1000000>;
>> 350 regulator-max-microvolt = <1000000>;
>> 351 regulator-always-on;
>> 352 regulator-boot-on;
>> 353
>> 354 regulator-state-mem {
>> 355 regulator-on-in-suspend;
>> 356 regulator-suspend-microvolt = <1000000>;
>> 357 };
>> 358 };
>> 359
>> 360 vcc3v3_pmu: LDO_REG4 {
>> 361 regulator-name = "vcc3v3_pmu";
>> 362 regulator-min-microvolt = <3300000>;
>> 363 regulator-max-microvolt = <3300000>;
>> 364 regulator-always-on;
>> 365 regulator-boot-on;
>> 366
>> 367 regulator-state-mem {
>> 368 regulator-on-in-suspend;
>> 369 regulator-suspend-microvolt = <3300000>;
>> 370 };
>> 371 };
>> 372
>> 373 vccio_sd: LDO_REG5 {
>> 374 regulator-name = "vccio_sd";
>> 375 regulator-min-microvolt = <1800000>;
>> 376 regulator-max-microvolt = <3300000>;
>> 377 regulator-always-on;
>> 378 regulator-boot-on;
>> 379
>> 380 regulator-state-mem {
>> 381 regulator-on-in-suspend;
>> 382 regulator-suspend-microvolt = <3300000>;
>> 383 };
>> 384 };
>> 385
>> 386 vcc_sd: LDO_REG6 {
>> 387 regulator-name = "vcc_sd";
>> 388 regulator-min-microvolt = <3300000>;
>> 389 regulator-max-microvolt = <3300000>;
>> 390 regulator-boot-on;
>> 391
>> 392 regulator-state-mem {
>> 393 regulator-on-in-suspend;
>> 394 regulator-suspend-microvolt = <3300000>;
>> 395 };
>> 396 };
>> 397
>> 398 vcc_bl: LDO_REG7 {
>> 399 regulator-name = "vcc_bl";
>> 400 regulator-min-microvolt = <3300000>;
>> 401 regulator-max-microvolt = <3300000>;
>> 402
>> 403 regulator-state-mem {
>> 404 regulator-off-in-suspend;
>> 405 regulator-suspend-microvolt = <3300000>;
>> 406 };
>> 407 };
>> 408
>> 409 vcc_lcd: LDO_REG8 {
>> 410 regulator-name = "vcc_lcd";
>> 411 regulator-min-microvolt = <2800000>;
>> 412 regulator-max-microvolt = <2800000>;
>> 413
>> 414 regulator-state-mem {
>> 415 regulator-off-in-suspend;
>> 416 regulator-suspend-microvolt = <2800000>;
>> 417 };
>> 418 };
>> 419
>> 420 vcc_cam: LDO_REG9 {
>> 421 regulator-name = "vcc_cam";
>> 422 regulator-min-microvolt = <3000000>;
>> 423 regulator-max-microvolt = <3000000>;
>> 424
>> 425 regulator-state-mem {
>> 426 regulator-off-in-suspend;
>> 427 regulator-suspend-microvolt = <3000000>;
>> 428 };
>> 429 };
>> 430 };
>> 431 };
>> 432 };
>> 433
>> 434 /* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
>> 435 &i2c1 {
>> 436 clock-frequency = <400000>;
>> 437 status = "okay";
>> 438 };
>> 439
>> 440 /* I2S 1 Channel Used */
>> 441 &i2s1_2ch {
>> 442 status = "okay";
>> 443 };
>> 444
>> 445 &io_domains {
>> 446 vccio1-supply = <&vcc_3v3>;
>> 447 vccio2-supply = <&vccio_sd>;
>> 448 vccio3-supply = <&vcc_3v3>;
>> 449 vccio4-supply = <&vcc_3v3>;
>> 450 vccio5-supply = <&vcc_3v3>;
>> 451 vccio6-supply = <&vcc_3v3>;
>> 452 status = "okay";
>> 453 };
>> 454
>> 455 &pmu_io_domains {
>> 456 pmuio1-supply = <&vcc3v3_pmu>;
>> 457 pmuio2-supply = <&vcc3v3_pmu>;
>> 458 status = "okay";
>> 459 };
>> 460
>> 461 &pwm1 {
>> 462 status = "okay";
>> 463 };
>> 464
>> 465 &saradc {
>> 466 vref-supply = <&vcc_1v8>;
>> 467 status = "okay";
>> 468 };
>> 469
>> 470 &sdmmc {
>> 471 cap-sd-highspeed;
>> 472 card-detect-delay = <200>;
>> 473 cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
>> 474 sd-uhs-sdr12;
>> 475 sd-uhs-sdr25;
>> 476 sd-uhs-sdr50;
>> 477 sd-uhs-sdr104;
>> 478 vmmc-supply = <&vcc_sd>;
>> 479 vqmmc-supply = <&vccio_sd>;
>> 480 status = "okay";
>> 481 };
>> 482
>> 483 &tsadc {
>> 484 status = "okay";
>> 485 };
>> 486
>> 487 &u2phy {
>> 488 status = "okay";
>> 489
>> 490 u2phy_host: host-port {
>> 491 status = "okay";
57 }; 492 };
>> 493
>> 494 u2phy_otg: otg-port {
>> 495 status = "disabled";
>> 496 };
>> 497 };
>> 498
>> 499 &usb20_otg {
>> 500 status = "okay";
58 }; 501 };
59 502
60 &internal_display { !! 503 /* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
61 compatible = "elida,kd35t133"; !! 504 &uart1 {
62 iovcc-supply = <&vcc_lcd>; !! 505 pinctrl-names = "default";
63 vdd-supply = <&vcc_lcd>; !! 506 pinctrl-0 = <&uart1_xfer &uart1_cts>;
>> 507 status = "okay";
64 }; 508 };
65 509
66 &rk817_charger { !! 510 &uart2 {
67 monitored-battery = <&battery>; !! 511 pinctrl-names = "default";
>> 512 pinctrl-0 = <&uart2m1_xfer>;
>> 513 status = "okay";
>> 514 };
>> 515
>> 516 &vopb {
>> 517 status = "okay";
>> 518 };
>> 519
>> 520 &vopb_mmu {
>> 521 status = "okay";
>> 522 };
>> 523
>> 524 &pinctrl {
>> 525 btns {
>> 526 btn_pins: btn-pins {
>> 527 rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
>> 528 <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
>> 529 <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
>> 530 <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
>> 531 <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
>> 532 <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
>> 533 <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
>> 534 <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
>> 535 <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
>> 536 <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
>> 537 <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
>> 538 <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
>> 539 <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
>> 540 <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
>> 541 <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
>> 542 <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
>> 543 };
>> 544 };
>> 545
>> 546 headphone {
>> 547 hp_det: hp-det {
>> 548 rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
>> 549 };
>> 550 };
>> 551
>> 552 leds {
>> 553 blue_led_pin: blue-led-pin {
>> 554 rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
>> 555 };
>> 556 };
>> 557
>> 558 pmic {
>> 559 dc_det: dc-det {
>> 560 rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
>> 561 };
>> 562
>> 563 pmic_int: pmic-int {
>> 564 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
>> 565 };
>> 566
>> 567 soc_slppin_gpio: soc_slppin_gpio {
>> 568 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
>> 569 };
>> 570
>> 571 soc_slppin_rst: soc_slppin_rst {
>> 572 rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
>> 573 };
>> 574
>> 575 soc_slppin_slp: soc_slppin_slp {
>> 576 rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
>> 577 };
>> 578 };
68 }; 579 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.