1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include <dt-bindings/gpio/gpio.h> 5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/pinctrl/rockchip.h> 6 #include <dt-bindings/pinctrl/rockchip.h>
7 #include <dt-bindings/soc/rockchip,vop2.h> 7 #include <dt-bindings/soc/rockchip,vop2.h>
8 #include "rk3566.dtsi" 8 #include "rk3566.dtsi"
9 9
10 / { 10 / {
11 model = "Pine64 Quartz64 Model A"; !! 11 model = "Pine64 RK3566 Quartz64-A Board";
12 compatible = "pine64,quartz64-a", "roc 12 compatible = "pine64,quartz64-a", "rockchip,rk3566";
13 13
14 aliases { 14 aliases {
15 ethernet0 = &gmac1; 15 ethernet0 = &gmac1;
16 mmc0 = &sdmmc0; 16 mmc0 = &sdmmc0;
17 mmc1 = &sdhci; 17 mmc1 = &sdhci;
18 }; 18 };
19 19
20 chosen: chosen { 20 chosen: chosen {
21 stdout-path = "serial2:1500000 21 stdout-path = "serial2:1500000n8";
22 }; 22 };
23 23
24 gmac1_clkin: external-gmac1-clock { 24 gmac1_clkin: external-gmac1-clock {
25 compatible = "fixed-clock"; 25 compatible = "fixed-clock";
26 clock-frequency = <125000000>; 26 clock-frequency = <125000000>;
27 clock-output-names = "gmac1_cl 27 clock-output-names = "gmac1_clkin";
28 #clock-cells = <0>; 28 #clock-cells = <0>;
29 }; 29 };
30 30
31 fan: gpio_fan { 31 fan: gpio_fan {
32 compatible = "gpio-fan"; 32 compatible = "gpio-fan";
33 gpios = <&gpio0 RK_PD5 GPIO_AC 33 gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
34 gpio-fan,speed-map = !! 34 gpio-fan,speed-map = <0 0
35 < 0 0>, !! 35 4500 1>;
36 <4500 1>; <<
37 pinctrl-names = "default"; 36 pinctrl-names = "default";
38 pinctrl-0 = <&fan_en_h>; 37 pinctrl-0 = <&fan_en_h>;
39 #cooling-cells = <2>; 38 #cooling-cells = <2>;
40 }; 39 };
41 40
42 hdmi-con { 41 hdmi-con {
43 compatible = "hdmi-connector"; 42 compatible = "hdmi-connector";
44 type = "a"; 43 type = "a";
45 44
46 port { 45 port {
47 hdmi_con_in: endpoint 46 hdmi_con_in: endpoint {
48 remote-endpoin 47 remote-endpoint = <&hdmi_out_con>;
49 }; 48 };
50 }; 49 };
51 }; 50 };
52 51
53 leds { 52 leds {
54 compatible = "gpio-leds"; 53 compatible = "gpio-leds";
55 54
56 led-work { 55 led-work {
57 label = "work-led"; 56 label = "work-led";
58 default-state = "off"; 57 default-state = "off";
59 gpios = <&gpio0 RK_PD3 58 gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
60 pinctrl-names = "defau 59 pinctrl-names = "default";
61 pinctrl-0 = <&work_led 60 pinctrl-0 = <&work_led_enable_h>;
62 retain-state-suspended 61 retain-state-suspended;
63 }; 62 };
64 63
65 led-diy { 64 led-diy {
66 label = "diy-led"; 65 label = "diy-led";
67 default-state = "on"; 66 default-state = "on";
68 gpios = <&gpio0 RK_PD4 67 gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
69 linux,default-trigger 68 linux,default-trigger = "heartbeat";
70 pinctrl-names = "defau 69 pinctrl-names = "default";
71 pinctrl-0 = <&diy_led_ 70 pinctrl-0 = <&diy_led_enable_h>;
72 retain-state-suspended 71 retain-state-suspended;
73 }; 72 };
74 }; 73 };
75 74
76 rk817-sound { 75 rk817-sound {
77 compatible = "simple-audio-car 76 compatible = "simple-audio-card";
78 simple-audio-card,format = "i2 77 simple-audio-card,format = "i2s";
79 simple-audio-card,name = "Anal 78 simple-audio-card,name = "Analog RK817";
80 simple-audio-card,mclk-fs = <2 79 simple-audio-card,mclk-fs = <256>;
81 80
82 simple-audio-card,cpu { 81 simple-audio-card,cpu {
83 sound-dai = <&i2s1_8ch 82 sound-dai = <&i2s1_8ch>;
84 }; 83 };
85 84
86 simple-audio-card,codec { 85 simple-audio-card,codec {
87 sound-dai = <&rk817>; 86 sound-dai = <&rk817>;
88 }; 87 };
89 }; 88 };
90 89
91 sdio_pwrseq: sdio-pwrseq { 90 sdio_pwrseq: sdio-pwrseq {
92 compatible = "mmc-pwrseq-simpl 91 compatible = "mmc-pwrseq-simple";
93 clocks = <&rk817 1>; 92 clocks = <&rk817 1>;
94 clock-names = "ext_clock"; 93 clock-names = "ext_clock";
95 pinctrl-names = "default"; 94 pinctrl-names = "default";
96 pinctrl-0 = <&wifi_enable_h>; 95 pinctrl-0 = <&wifi_enable_h>;
97 post-power-on-delay-ms = <100> 96 post-power-on-delay-ms = <100>;
98 power-off-delay-us = <5000000> 97 power-off-delay-us = <5000000>;
99 reset-gpios = <&gpio2 RK_PC2 G 98 reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
100 }; 99 };
101 100
102 spdif_dit: spdif-dit { 101 spdif_dit: spdif-dit {
103 compatible = "linux,spdif-dit" 102 compatible = "linux,spdif-dit";
104 #sound-dai-cells = <0>; 103 #sound-dai-cells = <0>;
105 }; 104 };
106 105
107 spdif_sound: spdif-sound { 106 spdif_sound: spdif-sound {
108 compatible = "simple-audio-car 107 compatible = "simple-audio-card";
109 simple-audio-card,name = "SPDI 108 simple-audio-card,name = "SPDIF";
110 109
111 simple-audio-card,cpu { 110 simple-audio-card,cpu {
112 sound-dai = <&spdif>; 111 sound-dai = <&spdif>;
113 }; 112 };
114 113
115 simple-audio-card,codec { 114 simple-audio-card,codec {
116 sound-dai = <&spdif_di 115 sound-dai = <&spdif_dit>;
117 }; 116 };
118 }; 117 };
119 118
120 vcc12v_dcin: vcc12v_dcin { 119 vcc12v_dcin: vcc12v_dcin {
121 compatible = "regulator-fixed" 120 compatible = "regulator-fixed";
122 regulator-name = "vcc12v_dcin" 121 regulator-name = "vcc12v_dcin";
123 regulator-always-on; 122 regulator-always-on;
124 regulator-boot-on; 123 regulator-boot-on;
125 regulator-min-microvolt = <120 124 regulator-min-microvolt = <12000000>;
126 regulator-max-microvolt = <120 125 regulator-max-microvolt = <12000000>;
127 }; 126 };
128 127
129 /* vbus feeds the rk817 usb input. 128 /* vbus feeds the rk817 usb input.
130 * With no battery attached, also feed 129 * With no battery attached, also feeds vcc_bat+
131 * via ON/OFF_BAT jumper 130 * via ON/OFF_BAT jumper
132 */ 131 */
133 vbus: vbus { 132 vbus: vbus {
134 compatible = "regulator-fixed" 133 compatible = "regulator-fixed";
135 regulator-name = "vbus"; 134 regulator-name = "vbus";
136 regulator-always-on; 135 regulator-always-on;
137 regulator-boot-on; 136 regulator-boot-on;
138 regulator-min-microvolt = <500 137 regulator-min-microvolt = <5000000>;
139 regulator-max-microvolt = <500 138 regulator-max-microvolt = <5000000>;
140 vin-supply = <&vcc12v_dcin>; 139 vin-supply = <&vcc12v_dcin>;
141 }; 140 };
142 141
143 vcc3v3_pcie_p: vcc3v3-pcie-p-regulator 142 vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
144 compatible = "regulator-fixed" 143 compatible = "regulator-fixed";
145 enable-active-high; 144 enable-active-high;
146 gpio = <&gpio0 RK_PC6 GPIO_ACT 145 gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
147 pinctrl-names = "default"; 146 pinctrl-names = "default";
148 pinctrl-0 = <&pcie_enable_h>; 147 pinctrl-0 = <&pcie_enable_h>;
149 regulator-name = "vcc3v3_pcie_ 148 regulator-name = "vcc3v3_pcie_p";
150 regulator-min-microvolt = <330 149 regulator-min-microvolt = <3300000>;
151 regulator-max-microvolt = <330 150 regulator-max-microvolt = <3300000>;
152 vin-supply = <&vcc_3v3>; 151 vin-supply = <&vcc_3v3>;
153 }; 152 };
154 153
155 vcc5v0_usb: vcc5v0_usb { 154 vcc5v0_usb: vcc5v0_usb {
156 compatible = "regulator-fixed" 155 compatible = "regulator-fixed";
157 regulator-name = "vcc5v0_usb"; 156 regulator-name = "vcc5v0_usb";
158 regulator-always-on; 157 regulator-always-on;
159 regulator-boot-on; 158 regulator-boot-on;
160 regulator-min-microvolt = <500 159 regulator-min-microvolt = <5000000>;
161 regulator-max-microvolt = <500 160 regulator-max-microvolt = <5000000>;
162 vin-supply = <&vcc12v_dcin>; 161 vin-supply = <&vcc12v_dcin>;
163 }; 162 };
164 163
165 /* all four ports are controlled by on 164 /* all four ports are controlled by one gpio
166 * the host ports are sourced from vcc 165 * the host ports are sourced from vcc5v0_usb
167 * the otg port is sourced from vcc5v0 166 * the otg port is sourced from vcc5v0_midu
168 */ 167 */
169 vcc5v0_usb20_host: vcc5v0_usb20_host { 168 vcc5v0_usb20_host: vcc5v0_usb20_host {
170 compatible = "regulator-fixed" 169 compatible = "regulator-fixed";
171 enable-active-high; 170 enable-active-high;
172 gpio = <&gpio4 RK_PB5 GPIO_ACT 171 gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
173 pinctrl-names = "default"; 172 pinctrl-names = "default";
174 pinctrl-0 = <&vcc5v0_usb20_hos 173 pinctrl-0 = <&vcc5v0_usb20_host_en>;
175 regulator-name = "vcc5v0_usb20 174 regulator-name = "vcc5v0_usb20_host";
176 regulator-min-microvolt = <500 175 regulator-min-microvolt = <5000000>;
177 regulator-max-microvolt = <500 176 regulator-max-microvolt = <5000000>;
178 vin-supply = <&vcc5v0_usb>; 177 vin-supply = <&vcc5v0_usb>;
179 }; 178 };
180 179
181 vcc5v0_usb20_otg: vcc5v0_usb20_otg { 180 vcc5v0_usb20_otg: vcc5v0_usb20_otg {
182 compatible = "regulator-fixed" 181 compatible = "regulator-fixed";
183 enable-active-high; 182 enable-active-high;
184 gpio = <&gpio4 RK_PB5 GPIO_ACT 183 gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
185 regulator-name = "vcc5v0_usb20 184 regulator-name = "vcc5v0_usb20_otg";
186 regulator-min-microvolt = <500 185 regulator-min-microvolt = <5000000>;
187 regulator-max-microvolt = <500 186 regulator-max-microvolt = <5000000>;
188 vin-supply = <&dcdc_boost>; 187 vin-supply = <&dcdc_boost>;
189 }; 188 };
190 189
191 vcc3v3_sd: vcc3v3_sd { 190 vcc3v3_sd: vcc3v3_sd {
192 compatible = "regulator-fixed" 191 compatible = "regulator-fixed";
193 gpio = <&gpio0 RK_PA5 GPIO_ACT 192 gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
194 pinctrl-names = "default"; 193 pinctrl-names = "default";
195 pinctrl-0 = <&vcc_sd_h>; 194 pinctrl-0 = <&vcc_sd_h>;
196 regulator-boot-on; 195 regulator-boot-on;
197 regulator-name = "vcc3v3_sd"; 196 regulator-name = "vcc3v3_sd";
198 regulator-min-microvolt = <330 197 regulator-min-microvolt = <3300000>;
199 regulator-max-microvolt = <330 198 regulator-max-microvolt = <3300000>;
200 vin-supply = <&vcc_3v3>; 199 vin-supply = <&vcc_3v3>;
201 }; 200 };
202 201
203 /* sourced from vbus and vcc_bat+ via 202 /* sourced from vbus and vcc_bat+ via rk817 sw5 */
204 vcc_sys: vcc_sys { 203 vcc_sys: vcc_sys {
205 compatible = "regulator-fixed" 204 compatible = "regulator-fixed";
206 regulator-name = "vcc_sys"; 205 regulator-name = "vcc_sys";
207 regulator-always-on; 206 regulator-always-on;
208 regulator-boot-on; 207 regulator-boot-on;
209 regulator-min-microvolt = <440 208 regulator-min-microvolt = <4400000>;
210 regulator-max-microvolt = <440 209 regulator-max-microvolt = <4400000>;
211 vin-supply = <&vbus>; 210 vin-supply = <&vbus>;
212 }; 211 };
213 212
214 /* sourced from vcc_sys, sdio module o 213 /* sourced from vcc_sys, sdio module operates internally at 3.3v */
215 vcc_wl: vcc_wl { 214 vcc_wl: vcc_wl {
216 compatible = "regulator-fixed" 215 compatible = "regulator-fixed";
217 regulator-name = "vcc_wl"; 216 regulator-name = "vcc_wl";
218 regulator-always-on; 217 regulator-always-on;
219 regulator-boot-on; 218 regulator-boot-on;
220 regulator-min-microvolt = <330 219 regulator-min-microvolt = <3300000>;
221 regulator-max-microvolt = <330 220 regulator-max-microvolt = <3300000>;
222 vin-supply = <&vcc_sys>; 221 vin-supply = <&vcc_sys>;
223 }; 222 };
224 }; 223 };
225 224
226 &combphy1 { 225 &combphy1 {
227 status = "okay"; 226 status = "okay";
228 }; 227 };
229 228
230 &combphy2 { 229 &combphy2 {
231 status = "okay"; 230 status = "okay";
232 }; 231 };
233 232
234 &cpu0 { 233 &cpu0 {
235 cpu-supply = <&vdd_cpu>; 234 cpu-supply = <&vdd_cpu>;
236 }; 235 };
237 236
238 &cpu1 { 237 &cpu1 {
239 cpu-supply = <&vdd_cpu>; 238 cpu-supply = <&vdd_cpu>;
240 }; 239 };
241 240
242 &cpu2 { 241 &cpu2 {
243 cpu-supply = <&vdd_cpu>; 242 cpu-supply = <&vdd_cpu>;
244 }; 243 };
245 244
246 &cpu3 { 245 &cpu3 {
247 cpu-supply = <&vdd_cpu>; 246 cpu-supply = <&vdd_cpu>;
248 }; 247 };
249 248
250 &cpu_thermal { 249 &cpu_thermal {
251 trips { 250 trips {
252 cpu_hot: cpu_hot { 251 cpu_hot: cpu_hot {
253 temperature = <55000>; 252 temperature = <55000>;
254 hysteresis = <2000>; 253 hysteresis = <2000>;
255 type = "active"; 254 type = "active";
256 }; 255 };
257 }; 256 };
258 257
259 cooling-maps { 258 cooling-maps {
260 map1 { 259 map1 {
261 trip = <&cpu_hot>; 260 trip = <&cpu_hot>;
262 cooling-device = <&fan 261 cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
263 }; 262 };
264 }; 263 };
265 }; 264 };
266 265
267 &gmac1 { 266 &gmac1 {
268 assigned-clocks = <&cru SCLK_GMAC1_RX_ 267 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
269 assigned-clock-parents = <&cru SCLK_GM 268 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
270 clock_in_out = "input"; 269 clock_in_out = "input";
271 phy-supply = <&vcc_3v3>; 270 phy-supply = <&vcc_3v3>;
272 phy-mode = "rgmii"; 271 phy-mode = "rgmii";
273 pinctrl-names = "default"; 272 pinctrl-names = "default";
274 pinctrl-0 = <&gmac1m0_miim 273 pinctrl-0 = <&gmac1m0_miim
275 &gmac1m0_tx_bus2 274 &gmac1m0_tx_bus2
276 &gmac1m0_rx_bus2 275 &gmac1m0_rx_bus2
277 &gmac1m0_rgmii_clk 276 &gmac1m0_rgmii_clk
278 &gmac1m0_clkinout 277 &gmac1m0_clkinout
279 &gmac1m0_rgmii_bus>; 278 &gmac1m0_rgmii_bus>;
280 snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ 279 snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
281 snps,reset-active-low; 280 snps,reset-active-low;
282 /* Reset time is 20ms, 100ms for rtl82 281 /* Reset time is 20ms, 100ms for rtl8211f */
283 snps,reset-delays-us = <0 20000 100000 282 snps,reset-delays-us = <0 20000 100000>;
284 tx_delay = <0x30>; 283 tx_delay = <0x30>;
285 rx_delay = <0x10>; 284 rx_delay = <0x10>;
286 phy-handle = <&rgmii_phy1>; 285 phy-handle = <&rgmii_phy1>;
287 status = "okay"; 286 status = "okay";
288 }; 287 };
289 288
290 &gpu { 289 &gpu {
291 mali-supply = <&vdd_gpu>; 290 mali-supply = <&vdd_gpu>;
292 status = "okay"; 291 status = "okay";
293 }; 292 };
294 293
295 &hdmi { 294 &hdmi {
296 avdd-0v9-supply = <&vdda_0v9>; 295 avdd-0v9-supply = <&vdda_0v9>;
297 avdd-1v8-supply = <&vcc_1v8>; 296 avdd-1v8-supply = <&vcc_1v8>;
298 status = "okay"; 297 status = "okay";
299 }; 298 };
300 299
301 &hdmi_in { 300 &hdmi_in {
302 hdmi_in_vp0: endpoint { 301 hdmi_in_vp0: endpoint {
303 remote-endpoint = <&vp0_out_hd 302 remote-endpoint = <&vp0_out_hdmi>;
304 }; 303 };
305 }; 304 };
306 305
307 &hdmi_out { 306 &hdmi_out {
308 hdmi_out_con: endpoint { 307 hdmi_out_con: endpoint {
309 remote-endpoint = <&hdmi_con_i 308 remote-endpoint = <&hdmi_con_in>;
310 }; 309 };
311 }; 310 };
312 311
313 &hdmi_sound { 312 &hdmi_sound {
314 status = "okay"; 313 status = "okay";
315 }; 314 };
316 315
317 &i2c0 { 316 &i2c0 {
318 status = "okay"; 317 status = "okay";
319 318
320 vdd_cpu: regulator@1c { 319 vdd_cpu: regulator@1c {
321 compatible = "tcs,tcs4525"; 320 compatible = "tcs,tcs4525";
322 reg = <0x1c>; 321 reg = <0x1c>;
323 fcs,suspend-voltage-selector = 322 fcs,suspend-voltage-selector = <1>;
324 regulator-name = "vdd_cpu"; 323 regulator-name = "vdd_cpu";
325 regulator-min-microvolt = <800 324 regulator-min-microvolt = <800000>;
326 regulator-max-microvolt = <115 325 regulator-max-microvolt = <1150000>;
327 regulator-ramp-delay = <2300>; 326 regulator-ramp-delay = <2300>;
328 regulator-always-on; 327 regulator-always-on;
329 regulator-boot-on; 328 regulator-boot-on;
330 vin-supply = <&vcc_sys>; 329 vin-supply = <&vcc_sys>;
331 330
332 regulator-state-mem { 331 regulator-state-mem {
333 regulator-off-in-suspe 332 regulator-off-in-suspend;
334 }; 333 };
335 }; 334 };
336 335
337 rk817: pmic@20 { 336 rk817: pmic@20 {
338 compatible = "rockchip,rk817"; 337 compatible = "rockchip,rk817";
339 reg = <0x20>; 338 reg = <0x20>;
340 interrupt-parent = <&gpio0>; 339 interrupt-parent = <&gpio0>;
341 interrupts = <RK_PA3 IRQ_TYPE_ 340 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
342 assigned-clocks = <&cru I2S1_M 341 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
343 assigned-clock-parents = <&cru 342 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
344 clock-names = "mclk"; 343 clock-names = "mclk";
345 clocks = <&cru I2S1_MCLKOUT_TX 344 clocks = <&cru I2S1_MCLKOUT_TX>;
346 clock-output-names = "rk808-cl 345 clock-output-names = "rk808-clkout1", "rk808-clkout2";
347 #clock-cells = <1>; 346 #clock-cells = <1>;
348 pinctrl-names = "default"; 347 pinctrl-names = "default";
349 pinctrl-0 = <&pmic_int_l>, <&i 348 pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
350 rockchip,system-power-controll 349 rockchip,system-power-controller;
351 #sound-dai-cells = <0>; 350 #sound-dai-cells = <0>;
352 wakeup-source; 351 wakeup-source;
353 352
354 vcc1-supply = <&vcc_sys>; 353 vcc1-supply = <&vcc_sys>;
355 vcc2-supply = <&vcc_sys>; 354 vcc2-supply = <&vcc_sys>;
356 vcc3-supply = <&vcc_sys>; 355 vcc3-supply = <&vcc_sys>;
357 vcc4-supply = <&vcc_sys>; 356 vcc4-supply = <&vcc_sys>;
358 vcc5-supply = <&vcc_sys>; 357 vcc5-supply = <&vcc_sys>;
359 vcc6-supply = <&vcc_sys>; 358 vcc6-supply = <&vcc_sys>;
360 vcc7-supply = <&vcc_sys>; 359 vcc7-supply = <&vcc_sys>;
361 vcc8-supply = <&vcc_sys>; 360 vcc8-supply = <&vcc_sys>;
362 vcc9-supply = <&dcdc_boost>; 361 vcc9-supply = <&dcdc_boost>;
363 362
364 regulators { 363 regulators {
365 vdd_logic: DCDC_REG1 { 364 vdd_logic: DCDC_REG1 {
366 regulator-alwa 365 regulator-always-on;
367 regulator-boot 366 regulator-boot-on;
368 regulator-min- 367 regulator-min-microvolt = <500000>;
369 regulator-max- 368 regulator-max-microvolt = <1350000>;
>> 369 regulator-init-microvolt = <900000>;
370 regulator-ramp 370 regulator-ramp-delay = <6001>;
371 regulator-init 371 regulator-initial-mode = <0x2>;
372 regulator-name 372 regulator-name = "vdd_logic";
373 regulator-stat 373 regulator-state-mem {
374 regula 374 regulator-on-in-suspend;
375 regula 375 regulator-suspend-microvolt = <900000>;
376 }; 376 };
377 }; 377 };
378 378
379 vdd_gpu: DCDC_REG2 { 379 vdd_gpu: DCDC_REG2 {
380 regulator-alwa 380 regulator-always-on;
381 regulator-boot 381 regulator-boot-on;
382 regulator-min- 382 regulator-min-microvolt = <500000>;
383 regulator-max- 383 regulator-max-microvolt = <1350000>;
>> 384 regulator-init-microvolt = <900000>;
384 regulator-ramp 385 regulator-ramp-delay = <6001>;
385 regulator-init 386 regulator-initial-mode = <0x2>;
386 regulator-name 387 regulator-name = "vdd_gpu";
387 regula 388 regulator-state-mem {
388 regula 389 regulator-off-in-suspend;
389 }; 390 };
390 }; 391 };
391 392
392 vcc_ddr: DCDC_REG3 { 393 vcc_ddr: DCDC_REG3 {
393 regulator-alwa 394 regulator-always-on;
394 regulator-boot 395 regulator-boot-on;
395 regulator-init 396 regulator-initial-mode = <0x2>;
396 regulator-name 397 regulator-name = "vcc_ddr";
397 regulator-stat 398 regulator-state-mem {
398 regula 399 regulator-on-in-suspend;
399 }; 400 };
400 }; 401 };
401 402
402 vcc_3v3: DCDC_REG4 { 403 vcc_3v3: DCDC_REG4 {
403 regulator-alwa 404 regulator-always-on;
404 regulator-boot 405 regulator-boot-on;
405 regulator-min- 406 regulator-min-microvolt = <3300000>;
406 regulator-max- 407 regulator-max-microvolt = <3300000>;
407 regulator-init 408 regulator-initial-mode = <0x2>;
408 regulator-name 409 regulator-name = "vcc_3v3";
409 regulator-stat 410 regulator-state-mem {
410 regula 411 regulator-off-in-suspend;
411 }; 412 };
412 }; 413 };
413 414
414 vcca1v8_pmu: LDO_REG1 415 vcca1v8_pmu: LDO_REG1 {
415 regulator-alwa 416 regulator-always-on;
416 regulator-boot 417 regulator-boot-on;
417 regulator-min- 418 regulator-min-microvolt = <1800000>;
418 regulator-max- 419 regulator-max-microvolt = <1800000>;
419 regulator-name 420 regulator-name = "vcca1v8_pmu";
420 regulator-stat 421 regulator-state-mem {
421 regula 422 regulator-on-in-suspend;
422 regula 423 regulator-suspend-microvolt = <1800000>;
423 }; 424 };
424 }; 425 };
425 426
426 vdda_0v9: LDO_REG2 { 427 vdda_0v9: LDO_REG2 {
427 regulator-alwa 428 regulator-always-on;
428 regulator-boot 429 regulator-boot-on;
429 regulator-min- 430 regulator-min-microvolt = <900000>;
430 regulator-max- 431 regulator-max-microvolt = <900000>;
431 regulator-name 432 regulator-name = "vdda_0v9";
432 regulator-stat 433 regulator-state-mem {
433 regula 434 regulator-off-in-suspend;
434 }; 435 };
435 }; 436 };
436 437
437 vdda0v9_pmu: LDO_REG3 438 vdda0v9_pmu: LDO_REG3 {
438 regulator-alwa 439 regulator-always-on;
439 regulator-boot 440 regulator-boot-on;
440 regulator-min- 441 regulator-min-microvolt = <900000>;
441 regulator-max- 442 regulator-max-microvolt = <900000>;
442 regulator-name 443 regulator-name = "vdda0v9_pmu";
443 regulator-stat 444 regulator-state-mem {
444 regula 445 regulator-on-in-suspend;
445 regula 446 regulator-suspend-microvolt = <900000>;
446 }; 447 };
447 }; 448 };
448 449
449 vccio_acodec: LDO_REG4 450 vccio_acodec: LDO_REG4 {
450 regulator-alwa 451 regulator-always-on;
451 regulator-boot 452 regulator-boot-on;
452 regulator-min- 453 regulator-min-microvolt = <3300000>;
453 regulator-max- 454 regulator-max-microvolt = <3300000>;
454 regulator-name 455 regulator-name = "vccio_acodec";
455 regulator-stat 456 regulator-state-mem {
456 regula 457 regulator-off-in-suspend;
457 }; 458 };
458 }; 459 };
459 460
460 vccio_sd: LDO_REG5 { 461 vccio_sd: LDO_REG5 {
461 regulator-alwa 462 regulator-always-on;
462 regulator-boot 463 regulator-boot-on;
463 regulator-min- 464 regulator-min-microvolt = <1800000>;
464 regulator-max- 465 regulator-max-microvolt = <3300000>;
465 regulator-name 466 regulator-name = "vccio_sd";
466 regulator-stat 467 regulator-state-mem {
467 regula 468 regulator-off-in-suspend;
468 }; 469 };
469 }; 470 };
470 471
471 vcc3v3_pmu: LDO_REG6 { 472 vcc3v3_pmu: LDO_REG6 {
472 regulator-alwa 473 regulator-always-on;
473 regulator-boot 474 regulator-boot-on;
474 regulator-min- 475 regulator-min-microvolt = <3300000>;
475 regulator-max- 476 regulator-max-microvolt = <3300000>;
476 regulator-name 477 regulator-name = "vcc3v3_pmu";
477 regulator-stat 478 regulator-state-mem {
478 regula 479 regulator-on-in-suspend;
479 regula 480 regulator-suspend-microvolt = <3300000>;
480 }; 481 };
481 }; 482 };
482 483
483 vcc_1v8: LDO_REG7 { 484 vcc_1v8: LDO_REG7 {
484 regulator-alwa 485 regulator-always-on;
485 regulator-boot 486 regulator-boot-on;
486 regulator-min- 487 regulator-min-microvolt = <1800000>;
487 regulator-max- 488 regulator-max-microvolt = <1800000>;
488 regulator-name 489 regulator-name = "vcc_1v8";
489 regulator-stat 490 regulator-state-mem {
490 regula 491 regulator-off-in-suspend;
491 }; 492 };
492 }; 493 };
493 494
494 vcc1v8_dvp: LDO_REG8 { 495 vcc1v8_dvp: LDO_REG8 {
495 regulator-alwa 496 regulator-always-on;
496 regulator-boot 497 regulator-boot-on;
497 regulator-min- 498 regulator-min-microvolt = <1800000>;
498 regulator-max- 499 regulator-max-microvolt = <1800000>;
499 regulator-name 500 regulator-name = "vcc1v8_dvp";
500 regulator-stat 501 regulator-state-mem {
501 regula 502 regulator-off-in-suspend;
502 }; 503 };
503 }; 504 };
504 505
505 vcc2v8_dvp: LDO_REG9 { 506 vcc2v8_dvp: LDO_REG9 {
506 regulator-alwa 507 regulator-always-on;
507 regulator-boot 508 regulator-boot-on;
508 regulator-min- 509 regulator-min-microvolt = <2800000>;
509 regulator-max- 510 regulator-max-microvolt = <2800000>;
510 regulator-name 511 regulator-name = "vcc2v8_dvp";
511 regulator-stat 512 regulator-state-mem {
512 regula 513 regulator-off-in-suspend;
513 }; 514 };
514 }; 515 };
515 516
516 dcdc_boost: BOOST { 517 dcdc_boost: BOOST {
517 regulator-alwa 518 regulator-always-on;
518 regulator-boot 519 regulator-boot-on;
519 regulator-min- 520 regulator-min-microvolt = <5000000>;
520 regulator-max- 521 regulator-max-microvolt = <5000000>;
521 regulator-name 522 regulator-name = "boost";
522 regulator-stat 523 regulator-state-mem {
523 regula 524 regulator-off-in-suspend;
524 }; 525 };
525 }; 526 };
526 527
527 otg_switch: OTG_SWITCH 528 otg_switch: OTG_SWITCH {
528 regulator-name 529 regulator-name = "otg_switch";
529 regulator-stat 530 regulator-state-mem {
530 regula 531 regulator-off-in-suspend;
531 }; 532 };
532 }; 533 };
533 }; 534 };
534 }; 535 };
535 }; 536 };
536 537
537 /* i2c3 is exposed on con40 538 /* i2c3 is exposed on con40
538 * pin 3 - i2c3_sda_m0, pullup to vcc_3v3 539 * pin 3 - i2c3_sda_m0, pullup to vcc_3v3
539 * pin 5 - i2c3_scl_m0, pullup to vcc_3v3 540 * pin 5 - i2c3_scl_m0, pullup to vcc_3v3
540 */ 541 */
541 &i2c3 { 542 &i2c3 {
542 status = "okay"; 543 status = "okay";
543 }; 544 };
544 545
545 &i2s0_8ch { 546 &i2s0_8ch {
546 status = "okay"; 547 status = "okay";
547 }; 548 };
548 549
549 &i2s1_8ch { 550 &i2s1_8ch {
550 pinctrl-names = "default"; 551 pinctrl-names = "default";
551 pinctrl-0 = <&i2s1m0_sclktx 552 pinctrl-0 = <&i2s1m0_sclktx
552 &i2s1m0_lrcktx 553 &i2s1m0_lrcktx
553 &i2s1m0_sdi0 554 &i2s1m0_sdi0
554 &i2s1m0_sdo0>; 555 &i2s1m0_sdo0>;
555 rockchip,trcm-sync-tx-only; 556 rockchip,trcm-sync-tx-only;
556 status = "okay"; 557 status = "okay";
557 }; 558 };
558 559
559 &mdio1 { 560 &mdio1 {
560 rgmii_phy1: ethernet-phy@0 { 561 rgmii_phy1: ethernet-phy@0 {
561 compatible = "ethernet-phy-iee 562 compatible = "ethernet-phy-ieee802.3-c22";
562 reg = <0>; 563 reg = <0>;
563 }; 564 };
564 }; 565 };
565 566
566 &pcie2x1 { 567 &pcie2x1 {
567 pinctrl-names = "default"; 568 pinctrl-names = "default";
568 pinctrl-0 = <&pcie_reset_h>; 569 pinctrl-0 = <&pcie_reset_h>;
569 reset-gpios = <&gpio1 RK_PB2 GPIO_ACTI 570 reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
570 vpcie3v3-supply = <&vcc3v3_pcie_p>; 571 vpcie3v3-supply = <&vcc3v3_pcie_p>;
571 status = "okay"; 572 status = "okay";
572 }; 573 };
573 574
574 &pinctrl { 575 &pinctrl {
575 bt { 576 bt {
576 bt_enable_h: bt-enable-h { 577 bt_enable_h: bt-enable-h {
577 rockchip,pins = <2 RK_ 578 rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
578 }; 579 };
579 580
580 bt_host_wake_l: bt-host-wake-l 581 bt_host_wake_l: bt-host-wake-l {
581 rockchip,pins = <2 RK_ 582 rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
582 }; 583 };
583 584
584 bt_wake_l: bt-wake-l { 585 bt_wake_l: bt-wake-l {
585 rockchip,pins = <2 RK_ 586 rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
586 }; 587 };
587 }; 588 };
588 589
589 fan { 590 fan {
590 fan_en_h: fan-en-h { 591 fan_en_h: fan-en-h {
591 rockchip,pins = <0 RK_ 592 rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
592 }; 593 };
593 }; 594 };
594 595
595 leds { 596 leds {
596 work_led_enable_h: work-led-en 597 work_led_enable_h: work-led-enable-h {
597 rockchip,pins = <0 RK_ 598 rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
598 }; 599 };
599 600
600 diy_led_enable_h: diy-led-enab 601 diy_led_enable_h: diy-led-enable-h {
601 rockchip,pins = <0 RK_ 602 rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
602 }; 603 };
603 }; 604 };
604 605
605 pcie { 606 pcie {
606 pcie_enable_h: pcie-enable-h { 607 pcie_enable_h: pcie-enable-h {
607 rockchip,pins = <0 RK_ 608 rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
608 }; 609 };
609 610
610 pcie_reset_h: pcie-reset-h { 611 pcie_reset_h: pcie-reset-h {
611 rockchip,pins = <1 RK_ 612 rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
612 }; 613 };
613 }; 614 };
614 615
615 pmic { 616 pmic {
616 pmic_int_l: pmic-int-l { 617 pmic_int_l: pmic-int-l {
617 rockchip,pins = <0 RK_ 618 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
618 }; 619 };
619 }; 620 };
620 621
621 usb2 { 622 usb2 {
622 vcc5v0_usb20_host_en: vcc5v0-u 623 vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
623 rockchip,pins = <4 RK_ 624 rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
624 }; 625 };
625 }; 626 };
626 627
627 sdio-pwrseq { 628 sdio-pwrseq {
628 wifi_enable_h: wifi-enable-h { 629 wifi_enable_h: wifi-enable-h {
629 rockchip,pins = <2 RK_ 630 rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
630 }; 631 };
631 }; 632 };
632 633
633 vcc_sd { 634 vcc_sd {
634 vcc_sd_h: vcc-sd-h { 635 vcc_sd_h: vcc-sd-h {
635 rockchip,pins = <0 RK_ 636 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
636 }; 637 };
637 }; 638 };
638 }; 639 };
639 640
640 &pmu_io_domains { 641 &pmu_io_domains {
641 pmuio1-supply = <&vcc3v3_pmu>; 642 pmuio1-supply = <&vcc3v3_pmu>;
642 pmuio2-supply = <&vcc3v3_pmu>; 643 pmuio2-supply = <&vcc3v3_pmu>;
643 vccio1-supply = <&vccio_acodec>; 644 vccio1-supply = <&vccio_acodec>;
644 vccio2-supply = <&vcc_1v8>; 645 vccio2-supply = <&vcc_1v8>;
645 vccio3-supply = <&vccio_sd>; 646 vccio3-supply = <&vccio_sd>;
646 vccio4-supply = <&vcc_1v8>; 647 vccio4-supply = <&vcc_1v8>;
647 vccio5-supply = <&vcc_3v3>; 648 vccio5-supply = <&vcc_3v3>;
648 vccio6-supply = <&vcc1v8_dvp>; 649 vccio6-supply = <&vcc1v8_dvp>;
649 vccio7-supply = <&vcc_3v3>; 650 vccio7-supply = <&vcc_3v3>;
650 status = "okay"; 651 status = "okay";
651 }; 652 };
652 653
653 &sdhci { 654 &sdhci {
654 bus-width = <8>; 655 bus-width = <8>;
655 mmc-hs200-1_8v; 656 mmc-hs200-1_8v;
656 non-removable; 657 non-removable;
657 vmmc-supply = <&vcc_3v3>; 658 vmmc-supply = <&vcc_3v3>;
658 vqmmc-supply = <&vcc_1v8>; 659 vqmmc-supply = <&vcc_1v8>;
659 status = "okay"; 660 status = "okay";
660 }; 661 };
661 662
662 &sdmmc0 { 663 &sdmmc0 {
663 bus-width = <4>; 664 bus-width = <4>;
664 cap-sd-highspeed; 665 cap-sd-highspeed;
665 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_ 666 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
666 disable-wp; 667 disable-wp;
667 pinctrl-names = "default"; 668 pinctrl-names = "default";
668 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk 669 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
669 sd-uhs-sdr104; 670 sd-uhs-sdr104;
670 vmmc-supply = <&vcc3v3_sd>; 671 vmmc-supply = <&vcc3v3_sd>;
671 vqmmc-supply = <&vccio_sd>; 672 vqmmc-supply = <&vccio_sd>;
672 status = "okay"; 673 status = "okay";
673 }; 674 };
674 675
675 &sdmmc1 { 676 &sdmmc1 {
676 bus-width = <4>; 677 bus-width = <4>;
677 cap-sd-highspeed; 678 cap-sd-highspeed;
678 cap-sdio-irq; 679 cap-sdio-irq;
679 keep-power-in-suspend; 680 keep-power-in-suspend;
680 mmc-pwrseq = <&sdio_pwrseq>; 681 mmc-pwrseq = <&sdio_pwrseq>;
681 non-removable; 682 non-removable;
682 pinctrl-names = "default"; 683 pinctrl-names = "default";
683 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd 684 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
684 sd-uhs-sdr104; 685 sd-uhs-sdr104;
685 vmmc-supply = <&vcc_wl>; 686 vmmc-supply = <&vcc_wl>;
686 vqmmc-supply = <&vcc_1v8>; 687 vqmmc-supply = <&vcc_1v8>;
687 status = "okay"; 688 status = "okay";
688 }; 689 };
689 690
690 &sfc { 691 &sfc {
691 pinctrl-0 = <&fspi_pins>; 692 pinctrl-0 = <&fspi_pins>;
692 pinctrl-names = "default"; 693 pinctrl-names = "default";
693 #address-cells = <1>; 694 #address-cells = <1>;
694 #size-cells = <0>; 695 #size-cells = <0>;
695 status = "disabled"; 696 status = "disabled";
696 697
697 flash@0 { 698 flash@0 {
698 compatible = "jedec,spi-nor"; 699 compatible = "jedec,spi-nor";
699 reg = <0>; 700 reg = <0>;
700 spi-max-frequency = <24000000> 701 spi-max-frequency = <24000000>;
701 spi-rx-bus-width = <4>; 702 spi-rx-bus-width = <4>;
702 spi-tx-bus-width = <1>; 703 spi-tx-bus-width = <1>;
703 }; 704 };
704 }; 705 };
705 706
706 /* spdif is exposed on con40 pin 18 */ 707 /* spdif is exposed on con40 pin 18 */
707 &spdif { 708 &spdif {
708 status = "okay"; 709 status = "okay";
709 }; 710 };
710 711
711 /* spi1 is exposed on con40 712 /* spi1 is exposed on con40
712 * pin 11 - spi1_mosi_m1 713 * pin 11 - spi1_mosi_m1
713 * pin 13 - spi1_miso_m1 714 * pin 13 - spi1_miso_m1
714 * pin 15 - spi1_clk_m1 715 * pin 15 - spi1_clk_m1
715 * pin 17 - spi1_cs0_m1 716 * pin 17 - spi1_cs0_m1
716 */ 717 */
717 &spi1 { 718 &spi1 {
718 pinctrl-names = "default"; 719 pinctrl-names = "default";
719 pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins> 720 pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
720 }; 721 };
721 722
722 &tsadc { 723 &tsadc {
723 /* tshut mode 0:CRU 1:GPIO */ 724 /* tshut mode 0:CRU 1:GPIO */
724 rockchip,hw-tshut-mode = <1>; 725 rockchip,hw-tshut-mode = <1>;
725 /* tshut polarity 0:LOW 1:HIGH */ 726 /* tshut polarity 0:LOW 1:HIGH */
726 rockchip,hw-tshut-polarity = <0>; 727 rockchip,hw-tshut-polarity = <0>;
727 status = "okay"; 728 status = "okay";
728 }; 729 };
729 730
730 /* uart0 is exposed on con40 731 /* uart0 is exposed on con40
731 * pin 12 - uart0_tx 732 * pin 12 - uart0_tx
732 * pin 14 - uart0_rx 733 * pin 14 - uart0_rx
733 */ 734 */
734 &uart0 { 735 &uart0 {
735 pinctrl-names = "default"; 736 pinctrl-names = "default";
736 pinctrl-0 = <&uart0_xfer>; 737 pinctrl-0 = <&uart0_xfer>;
737 status = "okay"; 738 status = "okay";
738 }; 739 };
739 740
740 &uart1 { 741 &uart1 {
741 dma-names = "tx", "rx"; <<
742 pinctrl-names = "default"; 742 pinctrl-names = "default";
743 pinctrl-0 = <&uart1m0_xfer &uart1m0_ct 743 pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
744 status = "okay"; 744 status = "okay";
745 uart-has-rtscts; 745 uart-has-rtscts;
746 746
747 bluetooth { 747 bluetooth {
748 compatible = "brcm,bcm43438-bt 748 compatible = "brcm,bcm43438-bt";
749 clocks = <&rk817 1>; 749 clocks = <&rk817 1>;
750 clock-names = "lpo"; 750 clock-names = "lpo";
751 host-wakeup-gpios = <&gpio2 RK 751 host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
752 device-wakeup-gpios = <&gpio2 752 device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
753 shutdown-gpios = <&gpio2 RK_PB 753 shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
754 pinctrl-names = "default"; 754 pinctrl-names = "default";
755 pinctrl-0 = <&bt_host_wake_l & 755 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
756 vbat-supply = <&vcc_sys>; 756 vbat-supply = <&vcc_sys>;
757 vddio-supply = <&vcca1v8_pmu>; 757 vddio-supply = <&vcca1v8_pmu>;
758 max-speed = <3000000>; 758 max-speed = <3000000>;
759 }; 759 };
760 }; 760 };
761 761
762 /* uart2 is exposed on con40 762 /* uart2 is exposed on con40
763 * pin 8 - uart2_tx_m0_debug 763 * pin 8 - uart2_tx_m0_debug
764 * pin 10 - uart2_rx_m0_debug 764 * pin 10 - uart2_rx_m0_debug
765 */ 765 */
766 &uart2 { 766 &uart2 {
767 status = "okay"; 767 status = "okay";
768 }; 768 };
769 769
770 &usb_host0_ehci { 770 &usb_host0_ehci {
771 status = "okay"; 771 status = "okay";
772 }; 772 };
773 773
774 &usb_host0_ohci { 774 &usb_host0_ohci {
775 status = "okay"; 775 status = "okay";
776 }; 776 };
777 777
778 &usb_host1_ehci { 778 &usb_host1_ehci {
779 status = "okay"; 779 status = "okay";
780 }; 780 };
781 781
782 &usb_host1_ohci { 782 &usb_host1_ohci {
783 status = "okay"; 783 status = "okay";
784 }; 784 };
785 785
786 &usb_host0_xhci { 786 &usb_host0_xhci {
787 dr_mode = "host"; 787 dr_mode = "host";
788 status = "okay"; 788 status = "okay";
789 }; 789 };
790 790
791 /* usb3 controller is muxed with sata1 */ 791 /* usb3 controller is muxed with sata1 */
792 &usb_host1_xhci { 792 &usb_host1_xhci {
793 status = "okay"; 793 status = "okay";
794 }; 794 };
795 795
796 &usb2phy0 { 796 &usb2phy0 {
797 status = "okay"; 797 status = "okay";
798 }; 798 };
799 799
800 &usb2phy0_host { 800 &usb2phy0_host {
801 phy-supply = <&vcc5v0_usb20_host>; 801 phy-supply = <&vcc5v0_usb20_host>;
802 status = "okay"; 802 status = "okay";
803 }; 803 };
804 804
805 &usb2phy0_otg { 805 &usb2phy0_otg {
806 phy-supply = <&vcc5v0_usb20_otg>; 806 phy-supply = <&vcc5v0_usb20_otg>;
807 status = "okay"; 807 status = "okay";
808 }; 808 };
809 809
810 &usb2phy1 { 810 &usb2phy1 {
811 status = "okay"; 811 status = "okay";
812 }; 812 };
813 813
814 &usb2phy1_host { 814 &usb2phy1_host {
815 phy-supply = <&vcc5v0_usb20_host>; 815 phy-supply = <&vcc5v0_usb20_host>;
816 status = "okay"; 816 status = "okay";
817 }; 817 };
818 818
819 &usb2phy1_otg { 819 &usb2phy1_otg {
820 phy-supply = <&vcc5v0_usb20_host>; 820 phy-supply = <&vcc5v0_usb20_host>;
821 status = "okay"; 821 status = "okay";
822 }; 822 };
823 823
824 &vop { 824 &vop {
825 assigned-clocks = <&cru DCLK_VOP0>, <& 825 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
826 assigned-clock-parents = <&pmucru PLL_ 826 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
827 status = "okay"; 827 status = "okay";
828 }; 828 };
829 829
830 &vop_mmu { 830 &vop_mmu {
831 status = "okay"; 831 status = "okay";
832 }; 832 };
833 833
834 &vp0 { 834 &vp0 {
835 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_E 835 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
836 reg = <ROCKCHIP_VOP2_EP_HDMI0> 836 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
837 remote-endpoint = <&hdmi_in_vp 837 remote-endpoint = <&hdmi_in_vp0>;
838 }; 838 };
839 }; 839 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.