1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3 /dts-v1/;
4 #include "rk3568-radxa-cm3i.dtsi"
5
6 / {
7 model = "Radxa E25 Carrier Board";
8 compatible = "radxa,e25", "radxa,cm3i"
9
10 aliases {
11 mmc1 = &sdmmc0;
12 };
13
14 pwm-leds {
15 compatible = "pwm-leds-multico
16
17 multi-led {
18 color = <LED_COLOR_ID_
19 max-brightness = <255>
20
21 led-red {
22 color = <LED_C
23 pwms = <&pwm1
24 };
25
26 led-green {
27 color = <LED_C
28 pwms = <&pwm2
29 };
30
31 led-blue {
32 color = <LED_C
33 pwms = <&pwm12
34 };
35 };
36 };
37
38 vbus_typec: vbus-typec-regulator {
39 compatible = "regulator-fixed"
40 enable-active-high;
41 gpio = <&gpio0 RK_PB7 GPIO_ACT
42 pinctrl-names = "default";
43 pinctrl-0 = <&vbus_typec_en>;
44 regulator-name = "vbus_typec";
45 regulator-min-microvolt = <500
46 regulator-max-microvolt = <500
47 vin-supply = <&vcc5v0_sys>;
48 };
49
50 /* actually fed by vcc5v0_sys, depende
51 * on pi6c clock generator
52 */
53 vcc3v3_minipcie: vcc3v3-minipcie-regul
54 compatible = "regulator-fixed"
55 enable-active-high;
56 gpio = <&gpio3 RK_PA7 GPIO_ACT
57 pinctrl-names = "default";
58 pinctrl-0 = <&minipcie_enable_
59 regulator-name = "vcc3v3_minip
60 regulator-min-microvolt = <330
61 regulator-max-microvolt = <330
62 vin-supply = <&vcc3v3_pi6c_05>
63 };
64
65 vcc3v3_ngff: vcc3v3-ngff-regulator {
66 compatible = "regulator-fixed"
67 enable-active-high;
68 gpio = <&gpio0 RK_PD6 GPIO_ACT
69 pinctrl-names = "default";
70 pinctrl-0 = <&ngffpcie_enable_
71 regulator-name = "vcc3v3_ngff"
72 regulator-min-microvolt = <330
73 regulator-max-microvolt = <330
74 vin-supply = <&vcc5v0_sys>;
75 };
76
77 vcc3v3_pcie30x1: vcc3v3-pcie30x1-regul
78 compatible = "regulator-fixed"
79 enable-active-high;
80 gpio = <&gpio0 RK_PC5 GPIO_ACT
81 pinctrl-names = "default";
82 pinctrl-0 = <&pcie30x1_enable_
83 regulator-name = "vcc3v3_pcie3
84 regulator-min-microvolt = <330
85 regulator-max-microvolt = <330
86 vin-supply = <&vcc5v0_sys>;
87 };
88
89 vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulat
90 compatible = "regulator-fixed"
91 enable-active-high;
92 gpios = <&gpio0 RK_PC7 GPIO_AC
93 pinctrl-names = "default";
94 pinctrl-0 = <&pcie_enable_h>;
95 regulator-name = "vcc3v3_pcie"
96 regulator-min-microvolt = <330
97 regulator-max-microvolt = <330
98 vin-supply = <&vcc5v0_sys>;
99 };
100 };
101
102 &combphy1 {
103 phy-supply = <&vcc3v3_pcie30x1>;
104 };
105
106 &display_subsystem {
107 status = "disabled";
108 };
109
110 &pcie2x1 {
111 pinctrl-names = "default";
112 pinctrl-0 = <&pcie20_reset_h>;
113 reset-gpios = <&gpio1 RK_PB2 GPIO_ACTI
114 vpcie3v3-supply = <&vcc3v3_pi6c_05>;
115 status = "okay";
116 };
117
118 &pcie30phy {
119 data-lanes = <1 2>;
120 status = "okay";
121 };
122
123 &pcie3x1 {
124 num-lanes = <1>;
125 pinctrl-names = "default";
126 pinctrl-0 = <&pcie30x1m0_pins>;
127 reset-gpios = <&gpio0 RK_PC3 GPIO_ACTI
128 vpcie3v3-supply = <&vcc3v3_minipcie>;
129 status = "okay";
130 };
131
132 &pcie3x2 {
133 num-lanes = <1>;
134 pinctrl-names = "default";
135 pinctrl-0 = <&pcie30x2_reset_h>;
136 reset-gpios = <&gpio2 RK_PD6 GPIO_ACTI
137 vpcie3v3-supply = <&vcc3v3_pi6c_05>;
138 status = "okay";
139 };
140
141 &pinctrl {
142 pcie {
143 pcie20_reset_h: pcie20-reset-h
144 rockchip,pins = <1 RK_
145 };
146
147 pcie30x1_enable_h: pcie30x1-en
148 rockchip,pins = <0 RK_
149 };
150
151 pcie30x2_reset_h: pcie30x2-res
152 rockchip,pins = <2 RK_
153 };
154
155 pcie_enable_h: pcie-enable-h {
156 rockchip,pins = <0 RK_
157 };
158 };
159
160 usb {
161 minipcie_enable_h: minipcie-en
162 rockchip,pins = <3 RK_
163 };
164
165 ngffpcie_enable_h: ngffpcie-en
166 rockchip,pins = <0 RK_
167 };
168
169 vbus_typec_en: vbus_typec_en {
170 rockchip,pins = <0 RK_
171 };
172 };
173 };
174
175 &pwm1 {
176 status = "okay";
177 };
178
179 &pwm2 {
180 status = "okay";
181 };
182
183 &pwm12 {
184 pinctrl-names = "default";
185 pinctrl-0 = <&pwm12m1_pins>;
186 status = "okay";
187 };
188
189 &sata1 {
190 status = "okay";
191 };
192
193 &sdmmc0 {
194 bus-width = <4>;
195 cap-sd-highspeed;
196 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_
197 /* Also used in pcie30x1_clkreqnm0 */
198 disable-wp;
199 pinctrl-names = "default";
200 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk
201 sd-uhs-sdr104;
202 vmmc-supply = <&vcc3v3_sd>;
203 vqmmc-supply = <&vccio_sd>;
204 status = "okay";
205 };
206
207 &usb_host0_ehci {
208 status = "okay";
209 };
210
211 &usb_host0_ohci {
212 status = "okay";
213 };
214
215 &usb_host0_xhci {
216 status = "okay";
217 };
218
219 &usb_host1_ehci {
220 status = "okay";
221 };
222
223 &usb_host1_ohci {
224 status = "okay";
225 };
226
227 &usb2phy0_otg {
228 phy-supply = <&vbus_typec>;
229 status = "okay";
230 };
231
232 &usb2phy1_host {
233 phy-supply = <&vcc3v3_minipcie>;
234 status = "okay";
235 };
236
237 &usb2phy1_otg {
238 phy-supply = <&vcc3v3_ngff>;
239 status = "okay";
240 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.