1 // SPDX-License-Identifier: GPL-2.0-only OR MI
2 /*
3 * Device Tree Source for J784S4 SoC Family MC
4 *
5 * Copyright (C) 2022-2024 Texas Instruments I
6 */
7
8 &cbass_mcu_wakeup {
9 sms: system-controller@44083000 {
10 bootph-all;
11 compatible = "ti,k2g-sci";
12 ti,host-id = <12>;
13
14 mbox-names = "rx", "tx";
15
16 mboxes = <&secure_proxy_main 1
17 <&secure_proxy_main 1
18
19 reg-names = "debug_messages";
20 reg = <0x00 0x44083000 0x00 0x
21
22 k3_pds: power-controller {
23 bootph-all;
24 compatible = "ti,sci-p
25 #power-domain-cells =
26 };
27
28 k3_clks: clock-controller {
29 bootph-all;
30 compatible = "ti,k2g-s
31 #clock-cells = <2>;
32 };
33
34 k3_reset: reset-controller {
35 bootph-all;
36 compatible = "ti,sci-r
37 #reset-cells = <2>;
38 };
39 };
40
41 wkup_conf: bus@43000000 {
42 bootph-all;
43 compatible = "simple-bus";
44 #address-cells = <1>;
45 #size-cells = <1>;
46 ranges = <0x0 0x00 0x43000000
47
48 chipid: chipid@14 {
49 bootph-all;
50 compatible = "ti,am654
51 reg = <0x14 0x4>;
52 };
53 };
54
55 secure_proxy_sa3: mailbox@43600000 {
56 compatible = "ti,am654-secure-
57 #mbox-cells = <1>;
58 reg-names = "target_data", "rt
59 reg = <0x00 0x43600000 0x00 0x
60 <0x00 0x44880000 0x00 0x
61 <0x00 0x44860000 0x00 0x
62 /*
63 * Marked Disabled:
64 * Node is incomplete as it is
65 * firmware on non-MPU process
66 */
67 status = "disabled";
68 };
69
70 mcu_ram: sram@41c00000 {
71 compatible = "mmio-sram";
72 reg = <0x00 0x41c00000 0x00 0x
73 ranges = <0x00 0x00 0x41c00000
74 #address-cells = <1>;
75 #size-cells = <1>;
76 };
77
78 wkup_pmx0: pinctrl@4301c000 {
79 compatible = "pinctrl-single";
80 /* Proxy 0 addressing */
81 reg = <0x00 0x4301c000 0x00 0x
82 #pinctrl-cells = <1>;
83 pinctrl-single,register-width
84 pinctrl-single,function-mask =
85 };
86
87 wkup_pmx1: pinctrl@4301c038 {
88 compatible = "pinctrl-single";
89 /* Proxy 0 addressing */
90 reg = <0x00 0x4301c038 0x00 0x
91 #pinctrl-cells = <1>;
92 pinctrl-single,register-width
93 pinctrl-single,function-mask =
94 };
95
96 wkup_pmx2: pinctrl@4301c068 {
97 compatible = "pinctrl-single";
98 /* Proxy 0 addressing */
99 reg = <0x00 0x4301c068 0x00 0x
100 #pinctrl-cells = <1>;
101 pinctrl-single,register-width
102 pinctrl-single,function-mask =
103 };
104
105 wkup_pmx3: pinctrl@4301c190 {
106 compatible = "pinctrl-single";
107 /* Proxy 0 addressing */
108 reg = <0x00 0x4301c190 0x00 0x
109 #pinctrl-cells = <1>;
110 pinctrl-single,register-width
111 pinctrl-single,function-mask =
112 };
113
114 wkup_gpio_intr: interrupt-controller@4
115 compatible = "ti,sci-intr";
116 reg = <0x00 0x42200000 0x00 0x
117 ti,intr-trigger-type = <1>;
118 interrupt-controller;
119 interrupt-parent = <&gic500>;
120 #interrupt-cells = <1>;
121 ti,sci = <&sms>;
122 ti,sci-dev-id = <177>;
123 ti,interrupt-ranges = <16 960
124 };
125
126 /* MCU_TIMERIO pad input CTRLMMR_MCU_T
127 mcu_timerio_input: pinctrl@40f04200 {
128 compatible = "pinctrl-single";
129 reg = <0x00 0x40f04200 0x00 0x
130 #pinctrl-cells = <1>;
131 pinctrl-single,register-width
132 pinctrl-single,function-mask =
133 /* Non-MPU Firmware usage */
134 status = "reserved";
135 };
136
137 /* MCU_TIMERIO pad output CTRLMMR_MCU_
138 mcu_timerio_output: pinctrl@40f04280 {
139 compatible = "pinctrl-single";
140 reg = <0x00 0x40f04280 0x00 0x
141 #pinctrl-cells = <1>;
142 pinctrl-single,register-width
143 pinctrl-single,function-mask =
144 /* Non-MPU Firmware usage */
145 status = "reserved";
146 };
147
148 mcu_conf: bus@40f00000 {
149 compatible = "simple-bus";
150 #address-cells = <1>;
151 #size-cells = <1>;
152 ranges = <0x0 0x0 0x40f00000 0
153
154 cpsw_mac_syscon: ethernet-mac-
155 compatible = "ti,am62p
156 reg = <0x200 0x8>;
157 };
158
159 phy_gmii_sel: phy@4040 {
160 compatible = "ti,am654
161 reg = <0x4040 0x4>;
162 #phy-cells = <1>;
163 };
164 };
165
166 mcu_timer0: timer@40400000 {
167 compatible = "ti,am654-timer";
168 reg = <0x00 0x40400000 0x00 0x
169 interrupts = <GIC_SPI 816 IRQ_
170 clocks = <&k3_clks 35 2>;
171 clock-names = "fck";
172 assigned-clocks = <&k3_clks 35
173 assigned-clock-parents = <&k3_
174 power-domains = <&k3_pds 35 TI
175 ti,timer-pwm;
176 /* Non-MPU Firmware usage */
177 status = "reserved";
178 };
179
180 mcu_timer1: timer@40410000 {
181 bootph-all;
182 compatible = "ti,am654-timer";
183 reg = <0x00 0x40410000 0x00 0x
184 interrupts = <GIC_SPI 817 IRQ_
185 clocks = <&k3_clks 117 2>;
186 clock-names = "fck";
187 assigned-clocks = <&k3_clks 11
188 assigned-clock-parents = <&k3_
189 power-domains = <&k3_pds 117 T
190 ti,timer-pwm;
191 /* Non-MPU Firmware usage */
192 status = "reserved";
193 };
194
195 mcu_timer2: timer@40420000 {
196 compatible = "ti,am654-timer";
197 reg = <0x00 0x40420000 0x00 0x
198 interrupts = <GIC_SPI 818 IRQ_
199 clocks = <&k3_clks 118 2>;
200 clock-names = "fck";
201 assigned-clocks = <&k3_clks 11
202 assigned-clock-parents = <&k3_
203 power-domains = <&k3_pds 118 T
204 ti,timer-pwm;
205 /* Non-MPU Firmware usage */
206 status = "reserved";
207 };
208
209 mcu_timer3: timer@40430000 {
210 compatible = "ti,am654-timer";
211 reg = <0x00 0x40430000 0x00 0x
212 interrupts = <GIC_SPI 819 IRQ_
213 clocks = <&k3_clks 119 2>;
214 clock-names = "fck";
215 assigned-clocks = <&k3_clks 11
216 assigned-clock-parents = <&k3_
217 power-domains = <&k3_pds 119 T
218 ti,timer-pwm;
219 /* Non-MPU Firmware usage */
220 status = "reserved";
221 };
222
223 mcu_timer4: timer@40440000 {
224 compatible = "ti,am654-timer";
225 reg = <0x00 0x40440000 0x00 0x
226 interrupts = <GIC_SPI 820 IRQ_
227 clocks = <&k3_clks 120 2>;
228 clock-names = "fck";
229 assigned-clocks = <&k3_clks 12
230 assigned-clock-parents = <&k3_
231 power-domains = <&k3_pds 120 T
232 ti,timer-pwm;
233 /* Non-MPU Firmware usage */
234 status = "reserved";
235 };
236
237 mcu_timer5: timer@40450000 {
238 compatible = "ti,am654-timer";
239 reg = <0x00 0x40450000 0x00 0x
240 interrupts = <GIC_SPI 821 IRQ_
241 clocks = <&k3_clks 121 2>;
242 clock-names = "fck";
243 assigned-clocks = <&k3_clks 12
244 assigned-clock-parents = <&k3_
245 power-domains = <&k3_pds 121 T
246 ti,timer-pwm;
247 /* Non-MPU Firmware usage */
248 status = "reserved";
249 };
250
251 mcu_timer6: timer@40460000 {
252 compatible = "ti,am654-timer";
253 reg = <0x00 0x40460000 0x00 0x
254 interrupts = <GIC_SPI 822 IRQ_
255 clocks = <&k3_clks 122 2>;
256 clock-names = "fck";
257 assigned-clocks = <&k3_clks 12
258 assigned-clock-parents = <&k3_
259 power-domains = <&k3_pds 122 T
260 ti,timer-pwm;
261 /* Non-MPU Firmware usage */
262 status = "reserved";
263 };
264
265 mcu_timer7: timer@40470000 {
266 compatible = "ti,am654-timer";
267 reg = <0x00 0x40470000 0x00 0x
268 interrupts = <GIC_SPI 823 IRQ_
269 clocks = <&k3_clks 123 2>;
270 clock-names = "fck";
271 assigned-clocks = <&k3_clks 12
272 assigned-clock-parents = <&k3_
273 power-domains = <&k3_pds 123 T
274 ti,timer-pwm;
275 /* Non-MPU Firmware usage */
276 status = "reserved";
277 };
278
279 mcu_timer8: timer@40480000 {
280 compatible = "ti,am654-timer";
281 reg = <0x00 0x40480000 0x00 0x
282 interrupts = <GIC_SPI 824 IRQ_
283 clocks = <&k3_clks 124 2>;
284 clock-names = "fck";
285 assigned-clocks = <&k3_clks 12
286 assigned-clock-parents = <&k3_
287 power-domains = <&k3_pds 124 T
288 ti,timer-pwm;
289 /* Non-MPU Firmware usage */
290 status = "reserved";
291 };
292
293 mcu_timer9: timer@40490000 {
294 compatible = "ti,am654-timer";
295 reg = <0x00 0x40490000 0x00 0x
296 interrupts = <GIC_SPI 825 IRQ_
297 clocks = <&k3_clks 125 2>;
298 clock-names = "fck";
299 assigned-clocks = <&k3_clks 12
300 assigned-clock-parents = <&k3_
301 power-domains = <&k3_pds 125 T
302 ti,timer-pwm;
303 /* Non-MPU Firmware usage */
304 status = "reserved";
305 };
306
307 wkup_uart0: serial@42300000 {
308 compatible = "ti,j721e-uart",
309 reg = <0x00 0x42300000 0x00 0x
310 interrupts = <GIC_SPI 897 IRQ_
311 clocks = <&k3_clks 397 0>;
312 clock-names = "fclk";
313 power-domains = <&k3_pds 397 T
314 status = "disabled";
315 };
316
317 mcu_uart0: serial@40a00000 {
318 compatible = "ti,j721e-uart",
319 reg = <0x00 0x40a00000 0x00 0x
320 interrupts = <GIC_SPI 846 IRQ_
321 clocks = <&k3_clks 149 0>;
322 clock-names = "fclk";
323 power-domains = <&k3_pds 149 T
324 status = "disabled";
325 };
326
327 wkup_gpio0: gpio@42110000 {
328 compatible = "ti,j721e-gpio",
329 reg = <0x00 0x42110000 0x00 0x
330 gpio-controller;
331 #gpio-cells = <2>;
332 interrupt-parent = <&wkup_gpio
333 interrupts = <103>, <104>, <10
334 interrupt-controller;
335 #interrupt-cells = <2>;
336 ti,ngpio = <89>;
337 ti,davinci-gpio-unbanked = <0>
338 power-domains = <&k3_pds 167 T
339 clocks = <&k3_clks 167 0>;
340 clock-names = "gpio";
341 status = "disabled";
342 };
343
344 wkup_gpio1: gpio@42100000 {
345 compatible = "ti,j721e-gpio",
346 reg = <0x00 0x42100000 0x00 0x
347 gpio-controller;
348 #gpio-cells = <2>;
349 interrupt-parent = <&wkup_gpio
350 interrupts = <112>, <113>, <11
351 interrupt-controller;
352 #interrupt-cells = <2>;
353 ti,ngpio = <89>;
354 ti,davinci-gpio-unbanked = <0>
355 power-domains = <&k3_pds 168 T
356 clocks = <&k3_clks 168 0>;
357 clock-names = "gpio";
358 status = "disabled";
359 };
360
361 wkup_i2c0: i2c@42120000 {
362 compatible = "ti,j721e-i2c", "
363 reg = <0x00 0x42120000 0x00 0x
364 interrupts = <GIC_SPI 896 IRQ_
365 #address-cells = <1>;
366 #size-cells = <0>;
367 clocks = <&k3_clks 279 2>;
368 clock-names = "fck";
369 power-domains = <&k3_pds 279 T
370 status = "disabled";
371 };
372
373 mcu_i2c0: i2c@40b00000 {
374 compatible = "ti,j721e-i2c", "
375 reg = <0x00 0x40b00000 0x00 0x
376 interrupts = <GIC_SPI 852 IRQ_
377 #address-cells = <1>;
378 #size-cells = <0>;
379 clocks = <&k3_clks 277 2>;
380 clock-names = "fck";
381 power-domains = <&k3_pds 277 T
382 status = "disabled";
383 };
384
385 mcu_i2c1: i2c@40b10000 {
386 compatible = "ti,j721e-i2c", "
387 reg = <0x00 0x40b10000 0x00 0x
388 interrupts = <GIC_SPI 853 IRQ_
389 #address-cells = <1>;
390 #size-cells = <0>;
391 clocks = <&k3_clks 278 2>;
392 clock-names = "fck";
393 power-domains = <&k3_pds 278 T
394 status = "disabled";
395 };
396
397 mcu_mcan0: can@40528000 {
398 compatible = "bosch,m_can";
399 reg = <0x00 0x40528000 0x00 0x
400 <0x00 0x40500000 0x00 0x
401 reg-names = "m_can", "message_
402 power-domains = <&k3_pds 263 T
403 clocks = <&k3_clks 263 6>, <&k
404 clock-names = "hclk", "cclk";
405 interrupts = <GIC_SPI 832 IRQ_
406 <GIC_SPI 833 IRQ_
407 interrupt-names = "int0", "int
408 bosch,mram-cfg = <0x00 128 64
409 status = "disabled";
410 };
411
412 mcu_mcan1: can@40568000 {
413 compatible = "bosch,m_can";
414 reg = <0x00 0x40568000 0x00 0x
415 <0x00 0x40540000 0x00 0x
416 reg-names = "m_can", "message_
417 power-domains = <&k3_pds 264 T
418 clocks = <&k3_clks 264 6>, <&k
419 clock-names = "hclk", "cclk";
420 interrupts = <GIC_SPI 835 IRQ_
421 <GIC_SPI 836 IRQ_
422 interrupt-names = "int0", "int
423 bosch,mram-cfg = <0x00 128 64
424 status = "disabled";
425 };
426
427 mcu_spi0: spi@40300000 {
428 compatible = "ti,am654-mcspi",
429 reg = <0x00 0x040300000 0x00 0
430 interrupts = <GIC_SPI 848 IRQ_
431 #address-cells = <1>;
432 #size-cells = <0>;
433 power-domains = <&k3_pds 384 T
434 clocks = <&k3_clks 384 0>;
435 status = "disabled";
436 };
437
438 mcu_spi1: spi@40310000 {
439 compatible = "ti,am654-mcspi",
440 reg = <0x00 0x040310000 0x00 0
441 interrupts = <GIC_SPI 849 IRQ_
442 #address-cells = <1>;
443 #size-cells = <0>;
444 power-domains = <&k3_pds 385 T
445 clocks = <&k3_clks 385 0>;
446 status = "disabled";
447 };
448
449 mcu_spi2: spi@40320000 {
450 compatible = "ti,am654-mcspi",
451 reg = <0x00 0x040320000 0x00 0
452 interrupts = <GIC_SPI 850 IRQ_
453 #address-cells = <1>;
454 #size-cells = <0>;
455 power-domains = <&k3_pds 386 T
456 clocks = <&k3_clks 386 0>;
457 status = "disabled";
458 };
459
460 mcu_navss: bus@28380000 {
461 bootph-all;
462 compatible = "simple-bus";
463 #address-cells = <2>;
464 #size-cells = <2>;
465 ranges = <0x00 0x28380000 0x00
466 ti,sci-dev-id = <323>;
467 dma-coherent;
468 dma-ranges;
469
470 mcu_ringacc: ringacc@2b800000
471 bootph-all;
472 compatible = "ti,am654
473 reg = <0x00 0x2b800000
474 <0x00 0x2b000000
475 <0x00 0x28590000
476 <0x00 0x2a500000
477 <0x00 0x28440000
478 reg-names = "rt", "fif
479 ti,num-rings = <286>;
480 ti,sci-rm-range-gp-rin
481 ti,sci = <&sms>;
482 ti,sci-dev-id = <328>;
483 msi-parent = <&main_ud
484 };
485
486 mcu_udmap: dma-controller@285c
487 bootph-all;
488 compatible = "ti,j721e
489 reg = <0x00 0x285c0000
490 <0x00 0x2a800000
491 <0x00 0x2aa00000
492 <0x00 0x284a0000
493 <0x00 0x284c0000
494 <0x00 0x28400000
495 reg-names = "gcfg", "r
496 "tchan", "
497 msi-parent = <&main_ud
498 #dma-cells = <1>;
499
500 ti,sci = <&sms>;
501 ti,sci-dev-id = <329>;
502 ti,ringacc = <&mcu_rin
503 ti,sci-rm-range-tchan
504
505 ti,sci-rm-range-rchan
506
507 ti,sci-rm-range-rflow
508 };
509 };
510
511 secure_proxy_mcu: mailbox@2a480000 {
512 compatible = "ti,am654-secure-
513 #mbox-cells = <1>;
514 reg-names = "target_data", "rt
515 reg = <0x00 0x2a480000 0x00 0x
516 <0x00 0x2a380000 0x00 0x
517 <0x00 0x2a400000 0x00 0x
518 /*
519 * Marked Disabled:
520 * Node is incomplete as it is
521 * firmware on non-MPU process
522 */
523 status = "disabled";
524 };
525
526 mcu_cpsw: ethernet@46000000 {
527 compatible = "ti,j721e-cpsw-nu
528 #address-cells = <2>;
529 #size-cells = <2>;
530 reg = <0x00 0x46000000 0x00 0x
531 reg-names = "cpsw_nuss";
532 ranges = <0x00 0x00 0x00 0x460
533 dma-coherent;
534 clocks = <&k3_clks 63 0>;
535 clock-names = "fck";
536 power-domains = <&k3_pds 63 TI
537
538 dmas = <&mcu_udmap 0xf000>,
539 <&mcu_udmap 0xf001>,
540 <&mcu_udmap 0xf002>,
541 <&mcu_udmap 0xf003>,
542 <&mcu_udmap 0xf004>,
543 <&mcu_udmap 0xf005>,
544 <&mcu_udmap 0xf006>,
545 <&mcu_udmap 0xf007>,
546 <&mcu_udmap 0x7000>;
547 dma-names = "tx0", "tx1", "tx2
548 "tx4", "tx5", "tx6
549 "rx";
550 status = "disabled";
551
552 ethernet-ports {
553 #address-cells = <1>;
554 #size-cells = <0>;
555
556 mcu_cpsw_port1: port@1
557 reg = <1>;
558 ti,mac-only;
559 label = "port1
560 ti,syscon-efus
561 phys = <&phy_g
562 };
563 };
564
565 davinci_mdio: mdio@f00 {
566 compatible = "ti,cpsw-
567 reg = <0x00 0xf00 0x00
568 #address-cells = <1>;
569 #size-cells = <0>;
570 clocks = <&k3_clks 63
571 clock-names = "fck";
572 bus_freq = <1000000>;
573 };
574
575 cpts@3d000 {
576 compatible = "ti,am65-
577 reg = <0x00 0x3d000 0x
578 clocks = <&k3_clks 63
579 clock-names = "cpts";
580 assigned-clocks = <&k3
581 assigned-clock-parents
582 interrupts-extended =
583 interrupt-names = "cpt
584 ti,cpts-ext-ts-inputs
585 ti,cpts-periodic-outpu
586 };
587 };
588
589 mcu_r5fss0: r5fss@41000000 {
590 compatible = "ti,j721s2-r5fss"
591 ti,cluster-mode = <1>;
592 #address-cells = <1>;
593 #size-cells = <1>;
594 ranges = <0x41000000 0x00 0x41
595 <0x41400000 0x00 0x41
596 power-domains = <&k3_pds 345 T
597
598 mcu_r5fss0_core0: r5f@41000000
599 compatible = "ti,j721s
600 reg = <0x41000000 0x00
601 <0x41010000 0x00
602 reg-names = "atcm", "b
603 ti,sci = <&sms>;
604 ti,sci-dev-id = <346>;
605 ti,sci-proc-ids = <0x0
606 resets = <&k3_reset 34
607 firmware-name = "j784s
608 ti,atcm-enable = <1>;
609 ti,btcm-enable = <1>;
610 ti,loczrama = <1>;
611 };
612
613 mcu_r5fss0_core1: r5f@41400000
614 compatible = "ti,j721s
615 reg = <0x41400000 0x00
616 <0x41410000 0x00
617 reg-names = "atcm", "b
618 ti,sci = <&sms>;
619 ti,sci-dev-id = <347>;
620 ti,sci-proc-ids = <0x0
621 resets = <&k3_reset 34
622 firmware-name = "j784s
623 ti,atcm-enable = <1>;
624 ti,btcm-enable = <1>;
625 ti,loczrama = <1>;
626 };
627 };
628
629 wkup_vtm0: temperature-sensor@42040000
630 compatible = "ti,j7200-vtm";
631 reg = <0x00 0x42040000 0x00 0x
632 <0x00 0x42050000 0x00 0x
633 power-domains = <&k3_pds 243 T
634 #thermal-sensor-cells = <1>;
635 };
636
637 tscadc0: tscadc@40200000 {
638 compatible = "ti,am3359-tscadc
639 reg = <0x00 0x40200000 0x00 0x
640 interrupts = <GIC_SPI 860 IRQ_
641 power-domains = <&k3_pds 0 TI_
642 clocks = <&k3_clks 0 0>;
643 assigned-clocks = <&k3_clks 0
644 assigned-clock-rates = <600000
645 clock-names = "fck";
646 dmas = <&main_udmap 0x7400>,
647 <&main_udmap 0x7401>;
648 dma-names = "fifo0", "fifo1";
649 status = "disabled";
650
651 adc {
652 #io-channel-cells = <1
653 compatible = "ti,am335
654 };
655 };
656
657 tscadc1: tscadc@40210000 {
658 compatible = "ti,am3359-tscadc
659 reg = <0x00 0x40210000 0x00 0x
660 interrupts = <GIC_SPI 861 IRQ_
661 power-domains = <&k3_pds 1 TI_
662 clocks = <&k3_clks 1 0>;
663 assigned-clocks = <&k3_clks 1
664 assigned-clock-rates = <600000
665 clock-names = "fck";
666 dmas = <&main_udmap 0x7402>,
667 <&main_udmap 0x7403>;
668 dma-names = "fifo0", "fifo1";
669 status = "disabled";
670
671 adc {
672 #io-channel-cells = <1
673 compatible = "ti,am335
674 };
675 };
676
677 fss: bus@47000000 {
678 compatible = "simple-bus";
679 #address-cells = <2>;
680 #size-cells = <2>;
681 ranges = <0x00 0x47000000 0x00
682 <0x00 0x47040000 0x00
683 <0x00 0x47050000 0x00
684 <0x00 0x50000000 0x00
685 <0x04 0x00000000 0x04
686
687 ospi0: spi@47040000 {
688 compatible = "ti,am654
689 reg = <0x00 0x47040000
690 <0x05 0x00000000
691 interrupts = <GIC_SPI
692 cdns,fifo-depth = <256
693 cdns,fifo-width = <4>;
694 cdns,trigger-address =
695 clocks = <&k3_clks 161
696 assigned-clocks = <&k3
697 assigned-clock-parents
698 assigned-clock-rates =
699 power-domains = <&k3_p
700 #address-cells = <1>;
701 #size-cells = <0>;
702 status = "disabled";
703 };
704
705 ospi1: spi@47050000 {
706 compatible = "ti,am654
707 reg = <0x00 0x47050000
708 <0x07 0x00000000
709 interrupts = <GIC_SPI
710 cdns,fifo-depth = <256
711 cdns,fifo-width = <4>;
712 cdns,trigger-address =
713 clocks = <&k3_clks 162
714 power-domains = <&k3_p
715 #address-cells = <1>;
716 #size-cells = <0>;
717 status = "disabled";
718 };
719 };
720
721 mcu_esm: esm@40800000 {
722 compatible = "ti,j721e-esm";
723 reg = <0x00 0x40800000 0x00 0x
724 ti,esm-pins = <95>;
725 bootph-pre-ram;
726 };
727
728 wkup_esm: esm@42080000 {
729 compatible = "ti,j721e-esm";
730 reg = <0x00 0x42080000 0x00 0x
731 ti,esm-pins = <63>;
732 bootph-pre-ram;
733 };
734
735 /*
736 * The 2 RTI instances are couple with
737 * reserved as these will be used by t
738 */
739 mcu_watchdog0: watchdog@40600000 {
740 compatible = "ti,j7-rti-wdt";
741 reg = <0x00 0x40600000 0x00 0x
742 clocks = <&k3_clks 367 1>;
743 power-domains = <&k3_pds 367 T
744 assigned-clocks = <&k3_clks 36
745 assigned-clock-parents = <&k3_
746 /* reserved for MCU_R5F0_0 */
747 status = "reserved";
748 };
749
750 mcu_watchdog1: watchdog@40610000 {
751 compatible = "ti,j7-rti-wdt";
752 reg = <0x00 0x40610000 0x00 0x
753 clocks = <&k3_clks 368 1>;
754 power-domains = <&k3_pds 368 T
755 assigned-clocks = <&k3_clks 36
756 assigned-clock-parents = <&k3_
757 /* reserved for MCU_R5F0_1 */
758 status = "reserved";
759 };
760 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.