1 // SPDX-License-Identifier: GPL-2.0+ 1 // SPDX-License-Identifier: GPL-2.0+
2 /* 2 /*
3 * dts file for Xilinx ZynqMP ZCU100 revC 3 * dts file for Xilinx ZynqMP ZCU100 revC
4 * 4 *
5 * (C) Copyright 2016 - 2022, Xilinx, Inc. !! 5 * (C) Copyright 2016 - 2019, Xilinx, Inc.
6 * (C) Copyright 2022 - 2023, Advanced Micro D <<
7 * 6 *
8 * Michal Simek <michal.simek@amd.com> !! 7 * Michal Simek <michal.simek@xilinx.com>
9 * Nathalie Chan King Choy 8 * Nathalie Chan King Choy
10 */ 9 */
11 10
12 /dts-v1/; 11 /dts-v1/;
13 12
14 #include "zynqmp.dtsi" 13 #include "zynqmp.dtsi"
15 #include "zynqmp-clk-ccf.dtsi" 14 #include "zynqmp-clk-ccf.dtsi"
16 #include <dt-bindings/input/input.h> 15 #include <dt-bindings/input/input.h>
17 #include <dt-bindings/interrupt-controller/irq 16 #include <dt-bindings/interrupt-controller/irq.h>
18 #include <dt-bindings/gpio/gpio.h> 17 #include <dt-bindings/gpio/gpio.h>
19 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h <<
20 #include <dt-bindings/phy/phy.h> <<
21 18
22 / { 19 / {
23 model = "ZynqMP ZCU100 RevC"; 20 model = "ZynqMP ZCU100 RevC";
24 compatible = "xlnx,zynqmp-zcu100-revC" 21 compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp";
25 22
26 aliases { 23 aliases {
27 i2c0 = &i2c1; 24 i2c0 = &i2c1;
28 rtc0 = &rtc; 25 rtc0 = &rtc;
29 serial0 = &uart1; 26 serial0 = &uart1;
30 serial1 = &uart0; 27 serial1 = &uart0;
31 serial2 = &dcc; 28 serial2 = &dcc;
32 spi0 = &spi0; 29 spi0 = &spi0;
33 spi1 = &spi1; 30 spi1 = &spi1;
34 usb0 = &usb0; <<
35 usb1 = &usb1; <<
36 mmc0 = &sdhci0; 31 mmc0 = &sdhci0;
37 mmc1 = &sdhci1; 32 mmc1 = &sdhci1;
38 }; 33 };
39 34
40 chosen { 35 chosen {
41 bootargs = "earlycon"; 36 bootargs = "earlycon";
42 stdout-path = "serial0:115200n 37 stdout-path = "serial0:115200n8";
43 }; 38 };
44 39
45 memory@0 { 40 memory@0 {
46 device_type = "memory"; 41 device_type = "memory";
47 reg = <0x0 0x0 0x0 0x80000000> 42 reg = <0x0 0x0 0x0 0x80000000>;
48 }; 43 };
49 44
50 gpio-keys { 45 gpio-keys {
51 compatible = "gpio-keys"; 46 compatible = "gpio-keys";
52 autorepeat; 47 autorepeat;
53 switch-4 { !! 48 sw4 {
54 label = "sw4"; 49 label = "sw4";
55 gpios = <&gpio 23 GPIO 50 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
56 linux,code = <KEY_POWE 51 linux,code = <KEY_POWER>;
57 wakeup-source; 52 wakeup-source;
58 autorepeat; 53 autorepeat;
59 }; 54 };
60 }; 55 };
61 56
62 iio-hwmon { <<
63 compatible = "iio-hwmon"; <<
64 io-channels = <&xilinx_ams 0>, <<
65 <&xilinx_ams 3>, <<
66 <&xilinx_ams 6>, <<
67 <&xilinx_ams 9>, <<
68 <&xilinx_ams 11> <<
69 }; <<
70 <<
71 leds { 57 leds {
72 compatible = "gpio-leds"; 58 compatible = "gpio-leds";
73 led-ds2 { 59 led-ds2 {
74 label = "ds2"; 60 label = "ds2";
75 gpios = <&gpio 20 GPIO 61 gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
76 linux,default-trigger 62 linux,default-trigger = "heartbeat";
77 }; 63 };
78 64
79 led-ds3 { 65 led-ds3 {
80 label = "ds3"; 66 label = "ds3";
81 gpios = <&gpio 19 GPIO 67 gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
82 linux,default-trigger 68 linux,default-trigger = "phy0tx"; /* WLAN tx */
83 default-state = "off"; 69 default-state = "off";
84 }; 70 };
85 71
86 led-ds4 { 72 led-ds4 {
87 label = "ds4"; 73 label = "ds4";
88 gpios = <&gpio 18 GPIO 74 gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
89 linux,default-trigger 75 linux,default-trigger = "phy0rx"; /* WLAN rx */
90 default-state = "off"; 76 default-state = "off";
91 }; 77 };
92 78
93 led-ds5 { 79 led-ds5 {
94 label = "ds5"; 80 label = "ds5";
95 gpios = <&gpio 17 GPIO 81 gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
96 linux,default-trigger 82 linux,default-trigger = "bluetooth-power";
97 }; 83 };
98 84
99 led-vbus-det { /* U5 USB5744 V !! 85 vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
100 label = "vbus_det"; 86 label = "vbus_det";
101 gpios = <&gpio 25 GPIO 87 gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
102 default-state = "on"; 88 default-state = "on";
103 }; 89 };
104 }; 90 };
105 91
106 wmmcsdio_fixed: fixedregulator-mmcsdio 92 wmmcsdio_fixed: fixedregulator-mmcsdio {
107 compatible = "regulator-fixed" 93 compatible = "regulator-fixed";
108 regulator-name = "wmmcsdio_fix 94 regulator-name = "wmmcsdio_fixed";
109 regulator-min-microvolt = <330 95 regulator-min-microvolt = <3300000>;
110 regulator-max-microvolt = <330 96 regulator-max-microvolt = <3300000>;
111 regulator-always-on; 97 regulator-always-on;
112 regulator-boot-on; 98 regulator-boot-on;
113 }; 99 };
114 100
115 sdio_pwrseq: sdio-pwrseq { 101 sdio_pwrseq: sdio-pwrseq {
116 compatible = "mmc-pwrseq-simpl 102 compatible = "mmc-pwrseq-simple";
117 reset-gpios = <&gpio 7 GPIO_AC 103 reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
118 post-power-on-delay-ms = <10>; 104 post-power-on-delay-ms = <10>;
119 }; 105 };
120 106
121 ina226 { 107 ina226 {
122 compatible = "iio-hwmon"; 108 compatible = "iio-hwmon";
123 io-channels = <&u35 0>, <&u35 109 io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
124 }; 110 };
125 <<
126 si5335_0: si5335-0 { /* clk0_usb - u23 <<
127 compatible = "fixed-clock"; <<
128 #clock-cells = <0>; <<
129 clock-frequency = <26000000>; <<
130 }; <<
131 <<
132 si5335_1: si5335-1 { /* clk1_dp - u23 <<
133 compatible = "fixed-clock"; <<
134 #clock-cells = <0>; <<
135 clock-frequency = <27000000>; <<
136 }; <<
137 }; 111 };
138 112
139 &dcc { 113 &dcc {
140 status = "okay"; 114 status = "okay";
141 }; 115 };
142 116
143 &gpio { 117 &gpio {
144 status = "okay"; 118 status = "okay";
145 gpio-line-names = "UART1_TX", "UART1_R 119 gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL",
146 "I2C1_SDA", "SPI1_SC 120 "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS",
147 "SPI1_MISO", "SPI1_M 121 "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1",
148 "SD0_DAT2", "SD0_DAT 122 "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1",
149 "PS_LED0", "SD0_CMD" 123 "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT",
150 "VBUS_DET", "POWER_I 124 "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE",
151 "DP_AUX_IN", "INA226 125 "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL",
152 "", "GPIO-A", "GPIO- 126 "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C",
153 "GPIO-D", "SPI0_CS", 127 "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E",
154 "GPIO-F", "SD1_D0", 128 "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3",
155 "SD1_CMD", "SD1_CLK" 129 "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2",
156 "USB0_NXT", "USB0_DA 130 "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3",
157 "USB0_DATA4", "USB0_ 131 "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK",
158 "USB1_DIR", "USB1_DA 132 "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1",
159 "USB1_STP", "USB1_DA 133 "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6",
160 "USB_DATA7", "WLAN_I 134 "USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */
161 "", "", 135 "", "",
162 "", "", "", "", "", 136 "", "", "", "", "", "", "", "", "", "",
163 "", "", "", "", "", 137 "", "", "", "", "", "", "", "", "", "",
164 "", "", "", "", "", 138 "", "", "", "", "", "", "", "", "", "",
165 "", "", "", "", "", 139 "", "", "", "", "", "", "", "", "", "",
166 "", "", "", "", "", 140 "", "", "", "", "", "", "", "", "", "",
167 "", "", "", "", "", 141 "", "", "", "", "", "", "", "", "", "",
168 "", "", "", "", "", 142 "", "", "", "", "", "", "", "", "", "",
169 "", "", "", "", "", 143 "", "", "", "", "", "", "", "", "", "",
170 "", "", "", "", "", 144 "", "", "", "", "", "", "", "", "", "",
171 "", "", "", ""; 145 "", "", "", "";
172 }; 146 };
173 147
174 &gpu { <<
175 status = "okay"; <<
176 }; <<
177 <<
178 &i2c1 { 148 &i2c1 {
179 status = "okay"; 149 status = "okay";
180 pinctrl-names = "default", "gpio"; <<
181 pinctrl-0 = <&pinctrl_i2c1_default>; <<
182 pinctrl-1 = <&pinctrl_i2c1_gpio>; <<
183 scl-gpios = <&gpio 4 (GPIO_ACTIVE_HIGH <<
184 sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH <<
185 clock-frequency = <100000>; 150 clock-frequency = <100000>;
186 i2c-mux@75 { /* u11 */ 151 i2c-mux@75 { /* u11 */
187 compatible = "nxp,pca9548"; 152 compatible = "nxp,pca9548";
188 #address-cells = <1>; 153 #address-cells = <1>;
189 #size-cells = <0>; 154 #size-cells = <0>;
190 reg = <0x75>; 155 reg = <0x75>;
191 i2csw_0: i2c@0 { 156 i2csw_0: i2c@0 {
192 #address-cells = <1>; 157 #address-cells = <1>;
193 #size-cells = <0>; 158 #size-cells = <0>;
194 reg = <0>; 159 reg = <0>;
195 label = "LS-I2C0"; 160 label = "LS-I2C0";
196 }; 161 };
197 i2csw_1: i2c@1 { 162 i2csw_1: i2c@1 {
198 #address-cells = <1>; 163 #address-cells = <1>;
199 #size-cells = <0>; 164 #size-cells = <0>;
200 reg = <1>; 165 reg = <1>;
201 label = "LS-I2C1"; 166 label = "LS-I2C1";
202 }; 167 };
203 i2csw_2: i2c@2 { 168 i2csw_2: i2c@2 {
204 #address-cells = <1>; 169 #address-cells = <1>;
205 #size-cells = <0>; 170 #size-cells = <0>;
206 reg = <2>; 171 reg = <2>;
207 label = "HS-I2C2"; 172 label = "HS-I2C2";
208 }; 173 };
209 i2csw_3: i2c@3 { 174 i2csw_3: i2c@3 {
210 #address-cells = <1>; 175 #address-cells = <1>;
211 #size-cells = <0>; 176 #size-cells = <0>;
212 reg = <3>; 177 reg = <3>;
213 label = "HS-I2C3"; 178 label = "HS-I2C3";
214 }; 179 };
215 i2csw_4: i2c@4 { 180 i2csw_4: i2c@4 {
216 #address-cells = <1>; 181 #address-cells = <1>;
217 #size-cells = <0>; 182 #size-cells = <0>;
218 reg = <0x4>; 183 reg = <0x4>;
219 184
220 pmic: pmic@5e { /* Cus 185 pmic: pmic@5e { /* Custom TI PMIC u33 */
221 compatible = " 186 compatible = "ti,tps65086";
222 reg = <0x5e>; 187 reg = <0x5e>;
223 interrupt-pare 188 interrupt-parent = <&gpio>;
224 interrupts = < 189 interrupts = <77 IRQ_TYPE_LEVEL_LOW>;
225 #gpio-cells = 190 #gpio-cells = <2>;
226 gpio-controlle 191 gpio-controller;
227 }; 192 };
228 }; 193 };
229 i2csw_5: i2c@5 { 194 i2csw_5: i2c@5 {
230 #address-cells = <1>; 195 #address-cells = <1>;
231 #size-cells = <0>; 196 #size-cells = <0>;
232 reg = <5>; 197 reg = <5>;
233 /* PS_PMBUS */ 198 /* PS_PMBUS */
234 u35: ina226@40 { /* u3 199 u35: ina226@40 { /* u35 */
235 compatible = " 200 compatible = "ti,ina226";
236 #io-channel-ce 201 #io-channel-cells = <1>;
237 reg = <0x40>; 202 reg = <0x40>;
238 shunt-resistor 203 shunt-resistor = <10000>;
239 /* MIO31 is al 204 /* MIO31 is alert which should be routed to PMUFW */
240 }; 205 };
241 }; 206 };
242 i2csw_6: i2c@6 { 207 i2csw_6: i2c@6 {
243 #address-cells = <1>; 208 #address-cells = <1>;
244 #size-cells = <0>; 209 #size-cells = <0>;
245 reg = <6>; 210 reg = <6>;
246 /* 211 /*
247 * Not Connected 212 * Not Connected
248 */ 213 */
249 }; 214 };
250 i2csw_7: i2c@7 { 215 i2csw_7: i2c@7 {
251 #address-cells = <1>; 216 #address-cells = <1>;
252 #size-cells = <0>; 217 #size-cells = <0>;
253 reg = <7>; 218 reg = <7>;
254 /* 219 /*
255 * usb5744 (DNP) - U5 220 * usb5744 (DNP) - U5
256 * 100kHz - this is de 221 * 100kHz - this is default freq for us
257 */ 222 */
258 }; 223 };
259 }; 224 };
260 }; 225 };
261 226
262 &pinctrl0 { <<
263 status = "okay"; <<
264 pinctrl_i2c1_default: i2c1-default { <<
265 mux { <<
266 groups = "i2c1_1_grp"; <<
267 function = "i2c1"; <<
268 }; <<
269 <<
270 conf { <<
271 groups = "i2c1_1_grp"; <<
272 bias-pull-up; <<
273 slew-rate = <SLEW_RATE <<
274 power-source = <IO_STA <<
275 }; <<
276 }; <<
277 <<
278 pinctrl_i2c1_gpio: i2c1-gpio-grp { <<
279 mux { <<
280 groups = "gpio0_4_grp" <<
281 function = "gpio0"; <<
282 }; <<
283 <<
284 conf { <<
285 groups = "gpio0_4_grp" <<
286 slew-rate = <SLEW_RATE <<
287 power-source = <IO_STA <<
288 }; <<
289 }; <<
290 <<
291 pinctrl_sdhci0_default: sdhci0-default <<
292 mux { <<
293 groups = "sdio0_3_grp" <<
294 function = "sdio0"; <<
295 }; <<
296 <<
297 conf { <<
298 groups = "sdio0_3_grp" <<
299 slew-rate = <SLEW_RATE <<
300 power-source = <IO_STA <<
301 bias-disable; <<
302 }; <<
303 <<
304 mux-cd { <<
305 groups = "sdio0_cd_0_g <<
306 function = "sdio0_cd"; <<
307 }; <<
308 <<
309 conf-cd { <<
310 groups = "sdio0_cd_0_g <<
311 bias-high-impedance; <<
312 bias-pull-up; <<
313 slew-rate = <SLEW_RATE <<
314 power-source = <IO_STA <<
315 }; <<
316 }; <<
317 <<
318 pinctrl_sdhci1_default: sdhci1-default <<
319 mux { <<
320 groups = "sdio1_2_grp" <<
321 function = "sdio1"; <<
322 }; <<
323 <<
324 conf { <<
325 groups = "sdio1_2_grp" <<
326 slew-rate = <SLEW_RATE <<
327 power-source = <IO_STA <<
328 bias-disable; <<
329 }; <<
330 }; <<
331 <<
332 pinctrl_spi0_default: spi0-default { <<
333 mux { <<
334 groups = "spi0_3_grp"; <<
335 function = "spi0"; <<
336 }; <<
337 <<
338 conf { <<
339 groups = "spi0_3_grp"; <<
340 bias-disable; <<
341 slew-rate = <SLEW_RATE <<
342 power-source = <IO_STA <<
343 }; <<
344 <<
345 mux-cs { <<
346 groups = "spi0_ss_9_gr <<
347 function = "spi0_ss"; <<
348 }; <<
349 <<
350 conf-cs { <<
351 groups = "spi0_ss_9_gr <<
352 bias-disable; <<
353 }; <<
354 <<
355 }; <<
356 <<
357 pinctrl_spi1_default: spi1-default { <<
358 mux { <<
359 groups = "spi1_0_grp"; <<
360 function = "spi1"; <<
361 }; <<
362 <<
363 conf { <<
364 groups = "spi1_0_grp"; <<
365 bias-disable; <<
366 slew-rate = <SLEW_RATE <<
367 power-source = <IO_STA <<
368 }; <<
369 <<
370 mux-cs { <<
371 groups = "spi1_ss_0_gr <<
372 function = "spi1_ss"; <<
373 }; <<
374 <<
375 conf-cs { <<
376 groups = "spi1_ss_0_gr <<
377 bias-disable; <<
378 }; <<
379 <<
380 }; <<
381 <<
382 pinctrl_uart0_default: uart0-default { <<
383 mux { <<
384 groups = "uart0_0_grp" <<
385 function = "uart0"; <<
386 }; <<
387 <<
388 conf { <<
389 groups = "uart0_0_grp" <<
390 slew-rate = <SLEW_RATE <<
391 power-source = <IO_STA <<
392 }; <<
393 <<
394 conf-rx { <<
395 pins = "MIO3"; <<
396 bias-high-impedance; <<
397 }; <<
398 <<
399 conf-tx { <<
400 pins = "MIO2"; <<
401 bias-disable; <<
402 }; <<
403 }; <<
404 <<
405 pinctrl_uart1_default: uart1-default { <<
406 mux { <<
407 groups = "uart1_0_grp" <<
408 function = "uart1"; <<
409 }; <<
410 <<
411 conf { <<
412 groups = "uart1_0_grp" <<
413 slew-rate = <SLEW_RATE <<
414 power-source = <IO_STA <<
415 }; <<
416 <<
417 conf-rx { <<
418 pins = "MIO1"; <<
419 bias-high-impedance; <<
420 }; <<
421 <<
422 conf-tx { <<
423 pins = "MIO0"; <<
424 bias-disable; <<
425 }; <<
426 }; <<
427 <<
428 pinctrl_usb0_default: usb0-default { <<
429 mux { <<
430 groups = "usb0_0_grp"; <<
431 function = "usb0"; <<
432 }; <<
433 <<
434 conf { <<
435 groups = "usb0_0_grp"; <<
436 power-source = <IO_STA <<
437 }; <<
438 <<
439 conf-rx { <<
440 pins = "MIO52", "MIO53 <<
441 bias-high-impedance; <<
442 drive-strength = <12>; <<
443 slew-rate = <SLEW_RATE <<
444 }; <<
445 <<
446 conf-tx { <<
447 pins = "MIO54", "MIO56 <<
448 "MIO60", "MIO61 <<
449 bias-disable; <<
450 drive-strength = <4>; <<
451 slew-rate = <SLEW_RATE <<
452 }; <<
453 }; <<
454 <<
455 pinctrl_usb1_default: usb1-default { <<
456 mux { <<
457 groups = "usb1_0_grp"; <<
458 function = "usb1"; <<
459 }; <<
460 <<
461 conf { <<
462 groups = "usb1_0_grp"; <<
463 power-source = <IO_STA <<
464 }; <<
465 <<
466 conf-rx { <<
467 pins = "MIO64", "MIO65 <<
468 bias-high-impedance; <<
469 drive-strength = <12>; <<
470 slew-rate = <SLEW_RATE <<
471 }; <<
472 <<
473 conf-tx { <<
474 pins = "MIO66", "MIO68 <<
475 "MIO72", "MIO73 <<
476 bias-disable; <<
477 drive-strength = <4>; <<
478 slew-rate = <SLEW_RATE <<
479 }; <<
480 }; <<
481 }; <<
482 <<
483 &psgtr { <<
484 status = "okay"; <<
485 /* usb3, dp */ <<
486 clocks = <&si5335_0>, <&si5335_1>; <<
487 clock-names = "ref0", "ref1"; <<
488 }; <<
489 <<
490 &rtc { 227 &rtc {
491 status = "okay"; 228 status = "okay";
492 }; 229 };
493 230
494 /* SD0 only supports 3.3V, no level shifter */ 231 /* SD0 only supports 3.3V, no level shifter */
495 &sdhci0 { 232 &sdhci0 {
496 status = "okay"; 233 status = "okay";
497 no-1-8-v; 234 no-1-8-v;
498 disable-wp; 235 disable-wp;
499 pinctrl-names = "default"; <<
500 pinctrl-0 = <&pinctrl_sdhci0_default>; <<
501 xlnx,mio-bank = <0>; <<
502 }; 236 };
503 237
504 &sdhci1 { 238 &sdhci1 {
505 status = "okay"; 239 status = "okay";
506 bus-width = <0x4>; 240 bus-width = <0x4>;
507 pinctrl-names = "default"; <<
508 pinctrl-0 = <&pinctrl_sdhci1_default>; <<
509 xlnx,mio-bank = <0>; <<
510 non-removable; 241 non-removable;
511 disable-wp; 242 disable-wp;
512 cap-power-off-card; 243 cap-power-off-card;
513 mmc-pwrseq = <&sdio_pwrseq>; 244 mmc-pwrseq = <&sdio_pwrseq>;
514 vqmmc-supply = <&wmmcsdio_fixed>; 245 vqmmc-supply = <&wmmcsdio_fixed>;
515 #address-cells = <1>; 246 #address-cells = <1>;
516 #size-cells = <0>; 247 #size-cells = <0>;
517 wlcore: wifi@2 { 248 wlcore: wifi@2 {
518 compatible = "ti,wl1831"; 249 compatible = "ti,wl1831";
519 reg = <2>; 250 reg = <2>;
520 interrupt-parent = <&gpio>; 251 interrupt-parent = <&gpio>;
521 interrupts = <76 IRQ_TYPE_EDGE 252 interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */
522 }; 253 };
523 }; 254 };
524 255
525 &spi0 { /* Low Speed connector */ 256 &spi0 { /* Low Speed connector */
526 status = "okay"; 257 status = "okay";
527 label = "LS-SPI0"; 258 label = "LS-SPI0";
528 num-cs = <1>; 259 num-cs = <1>;
529 pinctrl-names = "default"; <<
530 pinctrl-0 = <&pinctrl_spi0_default>; <<
531 }; 260 };
532 261
533 &spi1 { /* High Speed connector */ 262 &spi1 { /* High Speed connector */
534 status = "okay"; 263 status = "okay";
535 label = "HS-SPI1"; 264 label = "HS-SPI1";
536 num-cs = <1>; 265 num-cs = <1>;
537 pinctrl-names = "default"; <<
538 pinctrl-0 = <&pinctrl_spi1_default>; <<
539 }; 266 };
540 267
541 &uart0 { 268 &uart0 {
542 status = "okay"; 269 status = "okay";
543 pinctrl-names = "default"; <<
544 pinctrl-0 = <&pinctrl_uart0_default>; <<
545 bluetooth { 270 bluetooth {
546 compatible = "ti,wl1831-st"; 271 compatible = "ti,wl1831-st";
547 enable-gpios = <&gpio 8 GPIO_A 272 enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
548 }; 273 };
549 }; 274 };
550 275
551 &uart1 { 276 &uart1 {
552 status = "okay"; 277 status = "okay";
553 pinctrl-names = "default"; !! 278
554 pinctrl-0 = <&pinctrl_uart1_default>; <<
555 }; 279 };
556 280
557 /* ULPI SMSC USB3320 */ 281 /* ULPI SMSC USB3320 */
558 &usb0 { 282 &usb0 {
559 status = "okay"; 283 status = "okay";
560 pinctrl-names = "default"; <<
561 pinctrl-0 = <&pinctrl_usb0_default>; <<
562 phy-names = "usb3-phy"; <<
563 phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; <<
564 /delete-property/ reset-gpios; <<
565 }; <<
566 <<
567 &dwc3_0 { <<
568 status = "okay"; <<
569 dr_mode = "peripheral"; 284 dr_mode = "peripheral";
570 maximum-speed = "super-speed"; <<
571 }; 285 };
572 286
573 /* ULPI SMSC USB3320 */ 287 /* ULPI SMSC USB3320 */
574 &usb1 { 288 &usb1 {
575 status = "okay"; 289 status = "okay";
576 pinctrl-names = "default"; <<
577 pinctrl-0 = <&pinctrl_usb1_default>; <<
578 phy-names = "usb3-phy"; <<
579 phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; <<
580 reset-gpios = <&modepin_gpio 1 GPIO_AC <<
581 }; <<
582 <<
583 &dwc3_1 { <<
584 status = "okay"; <<
585 dr_mode = "host"; 290 dr_mode = "host";
586 maximum-speed = "super-speed"; <<
587 }; 291 };
588 292
589 &watchdog0 { 293 &watchdog0 {
590 status = "okay"; 294 status = "okay";
591 }; <<
592 <<
593 &xilinx_ams { <<
594 status = "okay"; <<
595 }; <<
596 <<
597 &ams_ps { <<
598 status = "okay"; <<
599 }; <<
600 <<
601 &zynqmp_dpdma { <<
602 status = "okay"; <<
603 }; <<
604 <<
605 &zynqmp_dpsub { <<
606 status = "okay"; <<
607 phy-names = "dp-phy0", "dp-phy1"; <<
608 phys = <&psgtr 1 PHY_TYPE_DP 0 1>, <<
609 <&psgtr 0 PHY_TYPE_DP 1 1>; <<
610 }; 295 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.