1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 /* 2 /*
3 * Copyright (C) 2009 Extreme Engineering Solu 3 * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
4 * Based on TQM8548 device tree 4 * Based on TQM8548 device tree
5 * 5 *
6 * XPedite5200 PrPMC/XMC module based on MPC85 6 * XPedite5200 PrPMC/XMC module based on MPC8548E
7 */ 7 */
8 8
9 /dts-v1/; 9 /dts-v1/;
10 10
11 / { 11 / {
12 model = "xes,xpedite5200"; 12 model = "xes,xpedite5200";
13 compatible = "xes,xpedite5200", "xes,M 13 compatible = "xes,xpedite5200", "xes,MPC8548";
14 #address-cells = <1>; 14 #address-cells = <1>;
15 #size-cells = <1>; 15 #size-cells = <1>;
16 16
17 aliases { 17 aliases {
18 ethernet0 = &enet0; 18 ethernet0 = &enet0;
19 ethernet1 = &enet1; 19 ethernet1 = &enet1;
20 ethernet2 = &enet2; 20 ethernet2 = &enet2;
21 ethernet3 = &enet3; 21 ethernet3 = &enet3;
22 22
23 serial0 = &serial0; 23 serial0 = &serial0;
24 serial1 = &serial1; 24 serial1 = &serial1;
25 pci0 = &pci0; 25 pci0 = &pci0;
26 }; 26 };
27 27
28 cpus { 28 cpus {
29 #address-cells = <1>; 29 #address-cells = <1>;
30 #size-cells = <0>; 30 #size-cells = <0>;
31 31
32 PowerPC,8548@0 { 32 PowerPC,8548@0 {
33 device_type = "cpu"; 33 device_type = "cpu";
34 reg = <0>; 34 reg = <0>;
35 d-cache-line-size = <3 35 d-cache-line-size = <32>; // 32 bytes
36 i-cache-line-size = <3 36 i-cache-line-size = <32>; // 32 bytes
37 d-cache-size = <0x8000 37 d-cache-size = <0x8000>; // L1, 32K
38 i-cache-size = <0x8000 38 i-cache-size = <0x8000>; // L1, 32K
39 next-level-cache = <&L 39 next-level-cache = <&L2>;
40 }; 40 };
41 }; 41 };
42 42
43 memory { 43 memory {
44 device_type = "memory"; 44 device_type = "memory";
45 reg = <0x0 0x0>; // Fil 45 reg = <0x0 0x0>; // Filled in by U-Boot
46 }; 46 };
47 47
48 soc@ef000000 { 48 soc@ef000000 {
49 #address-cells = <1>; 49 #address-cells = <1>;
50 #size-cells = <1>; 50 #size-cells = <1>;
51 device_type = "soc"; 51 device_type = "soc";
52 ranges = <0x0 0xef000000 0x100 52 ranges = <0x0 0xef000000 0x100000>;
53 bus-frequency = <0>; 53 bus-frequency = <0>;
54 compatible = "fsl,mpc8548-immr 54 compatible = "fsl,mpc8548-immr", "simple-bus";
55 55
56 ecm-law@0 { 56 ecm-law@0 {
57 compatible = "fsl,ecm- 57 compatible = "fsl,ecm-law";
58 reg = <0x0 0x1000>; 58 reg = <0x0 0x1000>;
59 fsl,num-laws = <12>; 59 fsl,num-laws = <12>;
60 }; 60 };
61 61
62 ecm@1000 { 62 ecm@1000 {
63 compatible = "fsl,mpc8 63 compatible = "fsl,mpc8548-ecm", "fsl,ecm";
64 reg = <0x1000 0x1000>; 64 reg = <0x1000 0x1000>;
65 interrupts = <17 2>; 65 interrupts = <17 2>;
66 interrupt-parent = <&m 66 interrupt-parent = <&mpic>;
67 }; 67 };
68 68
69 memory-controller@2000 { 69 memory-controller@2000 {
70 compatible = "fsl,mpc8 70 compatible = "fsl,mpc8548-memory-controller";
71 reg = <0x2000 0x1000>; 71 reg = <0x2000 0x1000>;
72 interrupt-parent = <&m 72 interrupt-parent = <&mpic>;
73 interrupts = <18 2>; 73 interrupts = <18 2>;
74 }; 74 };
75 75
76 L2: l2-cache-controller@20000 76 L2: l2-cache-controller@20000 {
77 compatible = "fsl,mpc8 77 compatible = "fsl,mpc8548-l2-cache-controller";
78 reg = <0x20000 0x1000> 78 reg = <0x20000 0x1000>;
79 cache-line-size = <32> 79 cache-line-size = <32>; // 32 bytes
80 cache-size = <0x80000> 80 cache-size = <0x80000>; // L2, 512K
81 interrupt-parent = <&m 81 interrupt-parent = <&mpic>;
82 interrupts = <16 2>; 82 interrupts = <16 2>;
83 }; 83 };
84 84
85 /* On-card I2C */ 85 /* On-card I2C */
86 i2c@3000 { 86 i2c@3000 {
87 #address-cells = <1>; 87 #address-cells = <1>;
88 #size-cells = <0>; 88 #size-cells = <0>;
89 cell-index = <0>; 89 cell-index = <0>;
90 compatible = "fsl-i2c" 90 compatible = "fsl-i2c";
91 reg = <0x3000 0x100>; 91 reg = <0x3000 0x100>;
92 interrupts = <43 2>; 92 interrupts = <43 2>;
93 interrupt-parent = <&m 93 interrupt-parent = <&mpic>;
94 dfsrr; 94 dfsrr;
95 95
96 /* 96 /*
97 * Board GPIO: 97 * Board GPIO:
98 * 0: BRD_CFG0 (1 98 * 0: BRD_CFG0 (1: P14 IO present)
99 * 1: BRD_CFG1 (1 99 * 1: BRD_CFG1 (1: FP ethernet present)
100 * 2: BRD_CFG2 (1 100 * 2: BRD_CFG2 (1: XMC IO present)
101 * 3: XMC root co 101 * 3: XMC root complex indicator
102 * 4: Flash boot 102 * 4: Flash boot device indicator
103 * 5: Flash write 103 * 5: Flash write protect enable
104 * 6: PMC monarch 104 * 6: PMC monarch indicator
105 * 7: PMC EREADY 105 * 7: PMC EREADY
106 */ 106 */
107 gpio1: gpio@18 { 107 gpio1: gpio@18 {
108 compatible = " 108 compatible = "nxp,pca9556";
109 reg = <0x18>; 109 reg = <0x18>;
110 #gpio-cells = 110 #gpio-cells = <2>;
111 gpio-controlle 111 gpio-controller;
112 polarity = <0x 112 polarity = <0x00>;
113 }; 113 };
114 114
115 /* P14 GPIO */ 115 /* P14 GPIO */
116 gpio2: gpio@19 { 116 gpio2: gpio@19 {
117 compatible = " 117 compatible = "nxp,pca9556";
118 reg = <0x19>; 118 reg = <0x19>;
119 #gpio-cells = 119 #gpio-cells = <2>;
120 gpio-controlle 120 gpio-controller;
121 polarity = <0x 121 polarity = <0x00>;
122 }; 122 };
123 123
124 eeprom@50 { 124 eeprom@50 {
125 compatible = " 125 compatible = "atmel,at24c16";
126 reg = <0x50>; 126 reg = <0x50>;
127 }; 127 };
128 128
129 rtc@68 { 129 rtc@68 {
130 compatible = " 130 compatible = "st,m41t00",
131 " 131 "dallas,ds1338";
132 reg = <0x68>; 132 reg = <0x68>;
133 }; 133 };
134 134
135 dtt@34 { !! 135 dtt@48 {
136 compatible = " 136 compatible = "maxim,max1237";
137 reg = <0x34>; 137 reg = <0x34>;
138 }; 138 };
139 }; 139 };
140 140
141 /* Off-card I2C */ 141 /* Off-card I2C */
142 i2c@3100 { 142 i2c@3100 {
143 #address-cells = <1>; 143 #address-cells = <1>;
144 #size-cells = <0>; 144 #size-cells = <0>;
145 cell-index = <1>; 145 cell-index = <1>;
146 compatible = "fsl-i2c" 146 compatible = "fsl-i2c";
147 reg = <0x3100 0x100>; 147 reg = <0x3100 0x100>;
148 interrupts = <43 2>; 148 interrupts = <43 2>;
149 interrupt-parent = <&m 149 interrupt-parent = <&mpic>;
150 dfsrr; 150 dfsrr;
151 }; 151 };
152 152
153 dma@21300 { 153 dma@21300 {
154 #address-cells = <1>; 154 #address-cells = <1>;
155 #size-cells = <1>; 155 #size-cells = <1>;
156 compatible = "fsl,mpc8 156 compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
157 reg = <0x21300 0x4>; 157 reg = <0x21300 0x4>;
158 ranges = <0x0 0x21100 158 ranges = <0x0 0x21100 0x200>;
159 cell-index = <0>; 159 cell-index = <0>;
160 dma-channel@0 { 160 dma-channel@0 {
161 compatible = " 161 compatible = "fsl,mpc8548-dma-channel",
162 162 "fsl,eloplus-dma-channel";
163 reg = <0x0 0x8 163 reg = <0x0 0x80>;
164 cell-index = < 164 cell-index = <0>;
165 interrupt-pare 165 interrupt-parent = <&mpic>;
166 interrupts = < 166 interrupts = <20 2>;
167 }; 167 };
168 dma-channel@80 { 168 dma-channel@80 {
169 compatible = " 169 compatible = "fsl,mpc8548-dma-channel",
170 170 "fsl,eloplus-dma-channel";
171 reg = <0x80 0x 171 reg = <0x80 0x80>;
172 cell-index = < 172 cell-index = <1>;
173 interrupt-pare 173 interrupt-parent = <&mpic>;
174 interrupts = < 174 interrupts = <21 2>;
175 }; 175 };
176 dma-channel@100 { 176 dma-channel@100 {
177 compatible = " 177 compatible = "fsl,mpc8548-dma-channel",
178 178 "fsl,eloplus-dma-channel";
179 reg = <0x100 0 179 reg = <0x100 0x80>;
180 cell-index = < 180 cell-index = <2>;
181 interrupt-pare 181 interrupt-parent = <&mpic>;
182 interrupts = < 182 interrupts = <22 2>;
183 }; 183 };
184 dma-channel@180 { 184 dma-channel@180 {
185 compatible = " 185 compatible = "fsl,mpc8548-dma-channel",
186 186 "fsl,eloplus-dma-channel";
187 reg = <0x180 0 187 reg = <0x180 0x80>;
188 cell-index = < 188 cell-index = <3>;
189 interrupt-pare 189 interrupt-parent = <&mpic>;
190 interrupts = < 190 interrupts = <23 2>;
191 }; 191 };
192 }; 192 };
193 193
194 /* eTSEC1: Front panel port 0 194 /* eTSEC1: Front panel port 0 */
195 enet0: ethernet@24000 { 195 enet0: ethernet@24000 {
196 #address-cells = <1>; 196 #address-cells = <1>;
197 #size-cells = <1>; 197 #size-cells = <1>;
198 cell-index = <0>; 198 cell-index = <0>;
199 device_type = "network 199 device_type = "network";
200 model = "eTSEC"; 200 model = "eTSEC";
201 compatible = "gianfar" 201 compatible = "gianfar";
202 reg = <0x24000 0x1000> 202 reg = <0x24000 0x1000>;
203 ranges = <0x0 0x24000 203 ranges = <0x0 0x24000 0x1000>;
204 local-mac-address = [ 204 local-mac-address = [ 00 00 00 00 00 00 ];
205 interrupts = <29 2 30 205 interrupts = <29 2 30 2 34 2>;
206 interrupt-parent = <&m 206 interrupt-parent = <&mpic>;
207 tbi-handle = <&tbi0>; 207 tbi-handle = <&tbi0>;
208 phy-handle = <&phy0>; 208 phy-handle = <&phy0>;
209 209
210 mdio@520 { 210 mdio@520 {
211 #address-cells 211 #address-cells = <1>;
212 #size-cells = 212 #size-cells = <0>;
213 compatible = " 213 compatible = "fsl,gianfar-mdio";
214 reg = <0x520 0 214 reg = <0x520 0x20>;
215 215
216 phy0: ethernet 216 phy0: ethernet-phy@1 {
217 interr 217 interrupt-parent = <&mpic>;
218 interr 218 interrupts = <8 1>;
219 reg = 219 reg = <0x1>;
220 }; 220 };
221 phy1: ethernet 221 phy1: ethernet-phy@2 {
222 interr 222 interrupt-parent = <&mpic>;
223 interr 223 interrupts = <8 1>;
224 reg = 224 reg = <0x2>;
225 }; 225 };
226 phy2: ethernet 226 phy2: ethernet-phy@3 {
227 interr 227 interrupt-parent = <&mpic>;
228 interr 228 interrupts = <8 1>;
229 reg = 229 reg = <0x3>;
230 }; 230 };
231 phy3: ethernet 231 phy3: ethernet-phy@4 {
232 interr 232 interrupt-parent = <&mpic>;
233 interr 233 interrupts = <8 1>;
234 reg = 234 reg = <0x4>;
235 }; 235 };
236 tbi0: tbi-phy@ 236 tbi0: tbi-phy@11 {
237 reg = 237 reg = <0x11>;
238 device 238 device_type = "tbi-phy";
239 }; 239 };
240 }; 240 };
241 }; 241 };
242 242
243 /* eTSEC2: Front panel port 1 243 /* eTSEC2: Front panel port 1 */
244 enet1: ethernet@25000 { 244 enet1: ethernet@25000 {
245 #address-cells = <1>; 245 #address-cells = <1>;
246 #size-cells = <1>; 246 #size-cells = <1>;
247 cell-index = <1>; 247 cell-index = <1>;
248 device_type = "network 248 device_type = "network";
249 model = "eTSEC"; 249 model = "eTSEC";
250 compatible = "gianfar" 250 compatible = "gianfar";
251 reg = <0x25000 0x1000> 251 reg = <0x25000 0x1000>;
252 ranges = <0x0 0x25000 252 ranges = <0x0 0x25000 0x1000>;
253 local-mac-address = [ 253 local-mac-address = [ 00 00 00 00 00 00 ];
254 interrupts = <35 2 36 254 interrupts = <35 2 36 2 40 2>;
255 interrupt-parent = <&m 255 interrupt-parent = <&mpic>;
256 tbi-handle = <&tbi1>; 256 tbi-handle = <&tbi1>;
257 phy-handle = <&phy1>; 257 phy-handle = <&phy1>;
258 258
259 mdio@520 { 259 mdio@520 {
260 #address-cells 260 #address-cells = <1>;
261 #size-cells = 261 #size-cells = <0>;
262 compatible = " 262 compatible = "fsl,gianfar-tbi";
263 reg = <0x520 0 263 reg = <0x520 0x20>;
264 264
265 tbi1: tbi-phy@ 265 tbi1: tbi-phy@11 {
266 reg = 266 reg = <0x11>;
267 device 267 device_type = "tbi-phy";
268 }; 268 };
269 }; 269 };
270 }; 270 };
271 271
272 /* eTSEC3: Rear panel port 2 * 272 /* eTSEC3: Rear panel port 2 */
273 enet2: ethernet@26000 { 273 enet2: ethernet@26000 {
274 #address-cells = <1>; 274 #address-cells = <1>;
275 #size-cells = <1>; 275 #size-cells = <1>;
276 cell-index = <2>; 276 cell-index = <2>;
277 device_type = "network 277 device_type = "network";
278 model = "eTSEC"; 278 model = "eTSEC";
279 compatible = "gianfar" 279 compatible = "gianfar";
280 reg = <0x26000 0x1000> 280 reg = <0x26000 0x1000>;
281 ranges = <0x0 0x26000 281 ranges = <0x0 0x26000 0x1000>;
282 local-mac-address = [ 282 local-mac-address = [ 00 00 00 00 00 00 ];
283 interrupts = <31 2 32 283 interrupts = <31 2 32 2 33 2>;
284 interrupt-parent = <&m 284 interrupt-parent = <&mpic>;
285 tbi-handle = <&tbi2>; 285 tbi-handle = <&tbi2>;
286 phy-handle = <&phy2>; 286 phy-handle = <&phy2>;
287 287
288 mdio@520 { 288 mdio@520 {
289 #address-cells 289 #address-cells = <1>;
290 #size-cells = 290 #size-cells = <0>;
291 compatible = " 291 compatible = "fsl,gianfar-tbi";
292 reg = <0x520 0 292 reg = <0x520 0x20>;
293 293
294 tbi2: tbi-phy@ 294 tbi2: tbi-phy@11 {
295 reg = 295 reg = <0x11>;
296 device 296 device_type = "tbi-phy";
297 }; 297 };
298 }; 298 };
299 }; 299 };
300 300
301 /* eTSEC4: Rear panel port 3 * 301 /* eTSEC4: Rear panel port 3 */
302 enet3: ethernet@27000 { 302 enet3: ethernet@27000 {
303 #address-cells = <1>; 303 #address-cells = <1>;
304 #size-cells = <1>; 304 #size-cells = <1>;
305 cell-index = <3>; 305 cell-index = <3>;
306 device_type = "network 306 device_type = "network";
307 model = "eTSEC"; 307 model = "eTSEC";
308 compatible = "gianfar" 308 compatible = "gianfar";
309 reg = <0x27000 0x1000> 309 reg = <0x27000 0x1000>;
310 ranges = <0x0 0x27000 310 ranges = <0x0 0x27000 0x1000>;
311 local-mac-address = [ 311 local-mac-address = [ 00 00 00 00 00 00 ];
312 interrupts = <37 2 38 312 interrupts = <37 2 38 2 39 2>;
313 interrupt-parent = <&m 313 interrupt-parent = <&mpic>;
314 tbi-handle = <&tbi3>; 314 tbi-handle = <&tbi3>;
315 phy-handle = <&phy3>; 315 phy-handle = <&phy3>;
316 316
317 mdio@520 { 317 mdio@520 {
318 #address-cells 318 #address-cells = <1>;
319 #size-cells = 319 #size-cells = <0>;
320 compatible = " 320 compatible = "fsl,gianfar-tbi";
321 reg = <0x520 0 321 reg = <0x520 0x20>;
322 322
323 tbi3: tbi-phy@ 323 tbi3: tbi-phy@11 {
324 reg = 324 reg = <0x11>;
325 device 325 device_type = "tbi-phy";
326 }; 326 };
327 }; 327 };
328 }; 328 };
329 329
330 serial0: serial@4500 { 330 serial0: serial@4500 {
331 cell-index = <0>; 331 cell-index = <0>;
332 device_type = "serial" 332 device_type = "serial";
333 compatible = "fsl,ns16 333 compatible = "fsl,ns16550", "ns16550";
334 reg = <0x4500 0x100>; 334 reg = <0x4500 0x100>;
335 clock-frequency = <0>; 335 clock-frequency = <0>;
336 current-speed = <11520 336 current-speed = <115200>;
337 interrupts = <42 2>; 337 interrupts = <42 2>;
338 interrupt-parent = <&m 338 interrupt-parent = <&mpic>;
339 }; 339 };
340 340
341 serial1: serial@4600 { 341 serial1: serial@4600 {
342 cell-index = <1>; 342 cell-index = <1>;
343 device_type = "serial" 343 device_type = "serial";
344 compatible = "fsl,ns16 344 compatible = "fsl,ns16550", "ns16550";
345 reg = <0x4600 0x100>; 345 reg = <0x4600 0x100>;
346 clock-frequency = <0>; 346 clock-frequency = <0>;
347 current-speed = <11520 347 current-speed = <115200>;
348 interrupts = <42 2>; 348 interrupts = <42 2>;
349 interrupt-parent = <&m 349 interrupt-parent = <&mpic>;
350 }; 350 };
351 351
352 global-utilities@e0000 { 352 global-utilities@e0000 { // global utilities reg
353 compatible = "fsl,mpc8 353 compatible = "fsl,mpc8548-guts";
354 reg = <0xe0000 0x1000> 354 reg = <0xe0000 0x1000>;
355 fsl,has-rstcr; 355 fsl,has-rstcr;
356 }; 356 };
357 357
358 mpic: pic@40000 { 358 mpic: pic@40000 {
359 interrupt-controller; 359 interrupt-controller;
360 #address-cells = <0>; 360 #address-cells = <0>;
361 #interrupt-cells = <2> 361 #interrupt-cells = <2>;
362 reg = <0x40000 0x40000 362 reg = <0x40000 0x40000>;
363 compatible = "chrp,ope 363 compatible = "chrp,open-pic";
364 device_type = "open-pi 364 device_type = "open-pic";
365 }; 365 };
366 }; 366 };
367 367
368 localbus@ef005000 { 368 localbus@ef005000 {
369 compatible = "fsl,mpc8548-loca 369 compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
370 "simple-bus"; 370 "simple-bus";
371 #address-cells = <2>; 371 #address-cells = <2>;
372 #size-cells = <1>; 372 #size-cells = <1>;
373 reg = <0xef005000 0x100>; 373 reg = <0xef005000 0x100>; // BRx, ORx, etc.
374 interrupt-parent = <&mpic>; 374 interrupt-parent = <&mpic>;
375 interrupts = <19 2>; 375 interrupts = <19 2>;
376 376
377 ranges = < 377 ranges = <
378 0 0x0 0xfc000000 0x040 378 0 0x0 0xfc000000 0x04000000 // NOR boot flash
379 1 0x0 0xf8000000 0x040 379 1 0x0 0xf8000000 0x04000000 // NOR expansion flash
380 2 0x0 0xef800000 0x000 380 2 0x0 0xef800000 0x00010000 // NAND CE1
381 3 0x0 0xef840000 0x000 381 3 0x0 0xef840000 0x00010000 // NAND CE2
382 >; 382 >;
383 383
384 nor-boot@0,0 { 384 nor-boot@0,0 {
385 #address-cells = <1>; 385 #address-cells = <1>;
386 #size-cells = <1>; 386 #size-cells = <1>;
387 compatible = "cfi-flas 387 compatible = "cfi-flash";
388 reg = <0 0x0 0x4000000 388 reg = <0 0x0 0x4000000>;
389 bank-width = <2>; 389 bank-width = <2>;
390 390
391 partition@0 { 391 partition@0 {
392 label = "Prima 392 label = "Primary OS";
393 reg = <0x00000 393 reg = <0x00000000 0x180000>;
394 }; 394 };
395 partition@180000 { 395 partition@180000 {
396 label = "Secon 396 label = "Secondary OS";
397 reg = <0x00180 397 reg = <0x00180000 0x180000>;
398 }; 398 };
399 partition@300000 { 399 partition@300000 {
400 label = "User" 400 label = "User";
401 reg = <0x00300 401 reg = <0x00300000 0x3c80000>;
402 }; 402 };
403 partition@3f80000 { 403 partition@3f80000 {
404 label = "Boot 404 label = "Boot firmware";
405 reg = <0x03f80 405 reg = <0x03f80000 0x80000>;
406 }; 406 };
407 }; 407 };
408 408
409 nor-alternate@1,0 { 409 nor-alternate@1,0 {
410 #address-cells = <1>; 410 #address-cells = <1>;
411 #size-cells = <1>; 411 #size-cells = <1>;
412 compatible = "cfi-flas 412 compatible = "cfi-flash";
413 reg = <1 0x0 0x4000000 413 reg = <1 0x0 0x4000000>;
414 bank-width = <2>; 414 bank-width = <2>;
415 415
416 partition@0 { 416 partition@0 {
417 label = "Files 417 label = "Filesystem";
418 reg = <0x00000 418 reg = <0x00000000 0x3f80000>;
419 }; 419 };
420 partition@3f80000 { 420 partition@3f80000 {
421 label = "Alter 421 label = "Alternate boot firmware";
422 reg = <0x03f80 422 reg = <0x03f80000 0x80000>;
423 }; 423 };
424 }; 424 };
425 425
426 nand@2,0 { 426 nand@2,0 {
427 #address-cells = <1>; 427 #address-cells = <1>;
428 #size-cells = <1>; 428 #size-cells = <1>;
429 compatible = "xes,addr 429 compatible = "xes,address-ctl-nand";
430 reg = <2 0x0 0x10000>; 430 reg = <2 0x0 0x10000>;
431 cle-line = <0x8>; 431 cle-line = <0x8>; /* CLE tied to A3 */
432 ale-line = <0x10>; 432 ale-line = <0x10>; /* ALE tied to A4 */
433 433
434 /* U-Boot should fix t 434 /* U-Boot should fix this up */
435 partition@0 { 435 partition@0 {
436 label = "NAND 436 label = "NAND Filesystem";
437 reg = <0 0x400 437 reg = <0 0x40000000>;
438 }; 438 };
439 }; 439 };
440 }; 440 };
441 441
442 /* PMC interface */ 442 /* PMC interface */
443 pci0: pci@ef008000 { 443 pci0: pci@ef008000 {
444 #interrupt-cells = <1>; 444 #interrupt-cells = <1>;
445 #size-cells = <2>; 445 #size-cells = <2>;
446 #address-cells = <3>; 446 #address-cells = <3>;
447 compatible = "fsl,mpc8540-pcix 447 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
448 device_type = "pci"; 448 device_type = "pci";
449 reg = <0xef008000 0x1000>; 449 reg = <0xef008000 0x1000>;
450 clock-frequency = <33333333>; 450 clock-frequency = <33333333>;
451 interrupt-map-mask = <0xf800 0 451 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
452 interrupt-map = < 452 interrupt-map = <
453 /* IDSEL */ 453 /* IDSEL */
454 0xe000 0 0 1 454 0xe000 0 0 1 &mpic 2 1
455 0xe000 0 0 2 455 0xe000 0 0 2 &mpic 3 1>;
456 456
457 interrupt-parent = <&mpic>; 457 interrupt-parent = <&mpic>;
458 interrupts = <24 2>; 458 interrupts = <24 2>;
459 bus-range = <0 0>; 459 bus-range = <0 0>;
460 ranges = <0x02000000 0 0x80000 460 ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000
461 0x01000000 0 0x00000 461 0x01000000 0 0x00000000 0xe8000000 0 0x00800000>;
462 }; 462 };
463 463
464 /* XMC PCIe is not yet enabled in U-Bo 464 /* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */
465 }; 465 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.