1 Documentation for support for Intel Processor !! 1 Intel Processor Trace
>> 2 =====================
>> 3
>> 4 Overview
>> 5 ========
>> 6
>> 7 Intel Processor Trace (Intel PT) is an extension of Intel Architecture that
>> 8 collects information about software execution such as control flow, execution
>> 9 modes and timings and formats it into highly compressed binary packets.
>> 10 Technical details are documented in the Intel 64 and IA-32 Architectures
>> 11 Software Developer Manuals, Chapter 36 Intel Processor Trace.
>> 12
>> 13 Intel PT is first supported in Intel Core M and 5th generation Intel Core
>> 14 processors that are based on the Intel micro-architecture code name Broadwell.
>> 15
>> 16 Trace data is collected by 'perf record' and stored within the perf.data file.
>> 17 See below for options to 'perf record'.
>> 18
>> 19 Trace data must be 'decoded' which involves walking the object code and matching
>> 20 the trace data packets. For example a TNT packet only tells whether a
>> 21 conditional branch was taken or not taken, so to make use of that packet the
>> 22 decoder must know precisely which instruction was being executed.
>> 23
>> 24 Decoding is done on-the-fly. The decoder outputs samples in the same format as
>> 25 samples output by perf hardware events, for example as though the "instructions"
>> 26 or "branches" events had been recorded. Presently 3 tools support this:
>> 27 'perf script', 'perf report' and 'perf inject'. See below for more information
>> 28 on using those tools.
>> 29
>> 30 The main distinguishing feature of Intel PT is that the decoder can determine
>> 31 the exact flow of software execution. Intel PT can be used to understand why
>> 32 and how did software get to a certain point, or behave a certain way. The
>> 33 software does not have to be recompiled, so Intel PT works with debug or release
>> 34 builds, however the executed images are needed - which makes use in JIT-compiled
>> 35 environments, or with self-modified code, a challenge. Also symbols need to be
>> 36 provided to make sense of addresses.
>> 37
>> 38 A limitation of Intel PT is that it produces huge amounts of trace data
>> 39 (hundreds of megabytes per second per core) which takes a long time to decode,
>> 40 for example two or three orders of magnitude longer than it took to collect.
>> 41 Another limitation is the performance impact of tracing, something that will
>> 42 vary depending on the use-case and architecture.
>> 43
>> 44
>> 45 Quickstart
>> 46 ==========
>> 47
>> 48 It is important to start small. That is because it is easy to capture vastly
>> 49 more data than can possibly be processed.
>> 50
>> 51 The simplest thing to do with Intel PT is userspace profiling of small programs.
>> 52 Data is captured with 'perf record' e.g. to trace 'ls' userspace-only:
>> 53
>> 54 perf record -e intel_pt//u ls
>> 55
>> 56 And profiled with 'perf report' e.g.
>> 57
>> 58 perf report
>> 59
>> 60 To also trace kernel space presents a problem, namely kernel self-modifying
>> 61 code. A fairly good kernel image is available in /proc/kcore but to get an
>> 62 accurate image a copy of /proc/kcore needs to be made under the same conditions
>> 63 as the data capture. A script perf-with-kcore can do that, but beware that the
>> 64 script makes use of 'sudo' to copy /proc/kcore. If you have perf installed
>> 65 locally from the source tree you can do:
>> 66
>> 67 ~/libexec/perf-core/perf-with-kcore record pt_ls -e intel_pt// -- ls
>> 68
>> 69 which will create a directory named 'pt_ls' and put the perf.data file and
>> 70 copies of /proc/kcore, /proc/kallsyms and /proc/modules into it. Then to use
>> 71 'perf report' becomes:
>> 72
>> 73 ~/libexec/perf-core/perf-with-kcore report pt_ls
>> 74
>> 75 Because samples are synthesized after-the-fact, the sampling period can be
>> 76 selected for reporting. e.g. sample every microsecond
>> 77
>> 78 ~/libexec/perf-core/perf-with-kcore report pt_ls --itrace=i1usge
>> 79
>> 80 See the sections below for more information about the --itrace option.
>> 81
>> 82 Beware the smaller the period, the more samples that are produced, and the
>> 83 longer it takes to process them.
>> 84
>> 85 Also note that the coarseness of Intel PT timing information will start to
>> 86 distort the statistical value of the sampling as the sampling period becomes
>> 87 smaller.
>> 88
>> 89 To represent software control flow, "branches" samples are produced. By default
>> 90 a branch sample is synthesized for every single branch. To get an idea what
>> 91 data is available you can use the 'perf script' tool with no parameters, which
>> 92 will list all the samples.
>> 93
>> 94 perf record -e intel_pt//u ls
>> 95 perf script
>> 96
>> 97 An interesting field that is not printed by default is 'flags' which can be
>> 98 displayed as follows:
>> 99
>> 100 perf script -Fcomm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,flags
>> 101
>> 102 The flags are "bcrosyiABEx" which stand for branch, call, return, conditional,
>> 103 system, asynchronous, interrupt, transaction abort, trace begin, trace end, and
>> 104 in transaction, respectively.
>> 105
>> 106 While it is possible to create scripts to analyze the data, an alternative
>> 107 approach is available to export the data to a postgresql database. Refer to
>> 108 script export-to-postgresql.py for more details, and to script
>> 109 call-graph-from-postgresql.py for an example of using the database.
>> 110
>> 111 As mentioned above, it is easy to capture too much data. One way to limit the
>> 112 data captured is to use 'snapshot' mode which is explained further below.
>> 113 Refer to 'new snapshot option' and 'Intel PT modes of operation' further below.
>> 114
>> 115 Another problem that will be experienced is decoder errors. They can be caused
>> 116 by inability to access the executed image, self-modified or JIT-ed code, or the
>> 117 inability to match side-band information (such as context switches and mmaps)
>> 118 which results in the decoder not knowing what code was executed.
>> 119
>> 120 There is also the problem of perf not being able to copy the data fast enough,
>> 121 resulting in data lost because the buffer was full. See 'Buffer handling' below
>> 122 for more details.
>> 123
>> 124
>> 125 perf record
>> 126 ===========
>> 127
>> 128 new event
>> 129 ---------
>> 130
>> 131 The Intel PT kernel driver creates a new PMU for Intel PT. PMU events are
>> 132 selected by providing the PMU name followed by the "config" separated by slashes.
>> 133 An enhancement has been made to allow default "config" e.g. the option
>> 134
>> 135 -e intel_pt//
>> 136
>> 137 will use a default config value. Currently that is the same as
>> 138
>> 139 -e intel_pt/tsc,noretcomp=0/
>> 140
>> 141 which is the same as
>> 142
>> 143 -e intel_pt/tsc=1,noretcomp=0/
>> 144
>> 145 Note there are now new config terms - see section 'config terms' further below.
>> 146
>> 147 The config terms are listed in /sys/devices/intel_pt/format. They are bit
>> 148 fields within the config member of the struct perf_event_attr which is
>> 149 passed to the kernel by the perf_event_open system call. They correspond to bit
>> 150 fields in the IA32_RTIT_CTL MSR. Here is a list of them and their definitions:
>> 151
>> 152 $ grep -H . /sys/bus/event_source/devices/intel_pt/format/*
>> 153 /sys/bus/event_source/devices/intel_pt/format/cyc:config:1
>> 154 /sys/bus/event_source/devices/intel_pt/format/cyc_thresh:config:19-22
>> 155 /sys/bus/event_source/devices/intel_pt/format/mtc:config:9
>> 156 /sys/bus/event_source/devices/intel_pt/format/mtc_period:config:14-17
>> 157 /sys/bus/event_source/devices/intel_pt/format/noretcomp:config:11
>> 158 /sys/bus/event_source/devices/intel_pt/format/psb_period:config:24-27
>> 159 /sys/bus/event_source/devices/intel_pt/format/tsc:config:10
>> 160
>> 161 Note that the default config must be overridden for each term i.e.
>> 162
>> 163 -e intel_pt/noretcomp=0/
>> 164
>> 165 is the same as:
>> 166
>> 167 -e intel_pt/tsc=1,noretcomp=0/
>> 168
>> 169 So, to disable TSC packets use:
>> 170
>> 171 -e intel_pt/tsc=0/
>> 172
>> 173 It is also possible to specify the config value explicitly:
>> 174
>> 175 -e intel_pt/config=0x400/
>> 176
>> 177 Note that, as with all events, the event is suffixed with event modifiers:
>> 178
>> 179 u userspace
>> 180 k kernel
>> 181 h hypervisor
>> 182 G guest
>> 183 H host
>> 184 p precise ip
>> 185
>> 186 'h', 'G' and 'H' are for virtualization which is not supported by Intel PT.
>> 187 'p' is also not relevant to Intel PT. So only options 'u' and 'k' are
>> 188 meaningful for Intel PT.
>> 189
>> 190 perf_event_attr is displayed if the -vv option is used e.g.
>> 191
>> 192 ------------------------------------------------------------
>> 193 perf_event_attr:
>> 194 type 6
>> 195 size 112
>> 196 config 0x400
>> 197 { sample_period, sample_freq } 1
>> 198 sample_type IP|TID|TIME|CPU|IDENTIFIER
>> 199 read_format ID
>> 200 disabled 1
>> 201 inherit 1
>> 202 exclude_kernel 1
>> 203 exclude_hv 1
>> 204 enable_on_exec 1
>> 205 sample_id_all 1
>> 206 ------------------------------------------------------------
>> 207 sys_perf_event_open: pid 31104 cpu 0 group_fd -1 flags 0x8
>> 208 sys_perf_event_open: pid 31104 cpu 1 group_fd -1 flags 0x8
>> 209 sys_perf_event_open: pid 31104 cpu 2 group_fd -1 flags 0x8
>> 210 sys_perf_event_open: pid 31104 cpu 3 group_fd -1 flags 0x8
>> 211 ------------------------------------------------------------
>> 212
>> 213
>> 214 config terms
>> 215 ------------
>> 216
>> 217 The June 2015 version of Intel 64 and IA-32 Architectures Software Developer
>> 218 Manuals, Chapter 36 Intel Processor Trace, defined new Intel PT features.
>> 219 Some of the features are reflect in new config terms. All the config terms are
>> 220 described below.
>> 221
>> 222 tsc Always supported. Produces TSC timestamp packets to provide
>> 223 timing information. In some cases it is possible to decode
>> 224 without timing information, for example a per-thread context
>> 225 that does not overlap executable memory maps.
>> 226
>> 227 The default config selects tsc (i.e. tsc=1).
>> 228
>> 229 noretcomp Always supported. Disables "return compression" so a TIP packet
>> 230 is produced when a function returns. Causes more packets to be
>> 231 produced but might make decoding more reliable.
>> 232
>> 233 The default config does not select noretcomp (i.e. noretcomp=0).
>> 234
>> 235 psb_period Allows the frequency of PSB packets to be specified.
>> 236
>> 237 The PSB packet is a synchronization packet that provides a
>> 238 starting point for decoding or recovery from errors.
>> 239
>> 240 Support for psb_period is indicated by:
>> 241
>> 242 /sys/bus/event_source/devices/intel_pt/caps/psb_cyc
>> 243
>> 244 which contains "1" if the feature is supported and "0"
>> 245 otherwise.
>> 246
>> 247 Valid values are given by:
>> 248
>> 249 /sys/bus/event_source/devices/intel_pt/caps/psb_periods
>> 250
>> 251 which contains a hexadecimal value, the bits of which represent
>> 252 valid values e.g. bit 2 set means value 2 is valid.
>> 253
>> 254 The psb_period value is converted to the approximate number of
>> 255 trace bytes between PSB packets as:
>> 256
>> 257 2 ^ (value + 11)
>> 258
>> 259 e.g. value 3 means 16KiB bytes between PSBs
>> 260
>> 261 If an invalid value is entered, the error message
>> 262 will give a list of valid values e.g.
>> 263
>> 264 $ perf record -e intel_pt/psb_period=15/u uname
>> 265 Invalid psb_period for intel_pt. Valid values are: 0-5
>> 266
>> 267 If MTC packets are selected, the default config selects a value
>> 268 of 3 (i.e. psb_period=3) or the nearest lower value that is
>> 269 supported (0 is always supported). Otherwise the default is 0.
>> 270
>> 271 If decoding is expected to be reliable and the buffer is large
>> 272 then a large PSB period can be used.
>> 273
>> 274 Because a TSC packet is produced with PSB, the PSB period can
>> 275 also affect the granularity to timing information in the absence
>> 276 of MTC or CYC.
>> 277
>> 278 mtc Produces MTC timing packets.
>> 279
>> 280 MTC packets provide finer grain timestamp information than TSC
>> 281 packets. MTC packets record time using the hardware crystal
>> 282 clock (CTC) which is related to TSC packets using a TMA packet.
>> 283
>> 284 Support for this feature is indicated by:
>> 285
>> 286 /sys/bus/event_source/devices/intel_pt/caps/mtc
>> 287
>> 288 which contains "1" if the feature is supported and
>> 289 "0" otherwise.
>> 290
>> 291 The frequency of MTC packets can also be specified - see
>> 292 mtc_period below.
>> 293
>> 294 mtc_period Specifies how frequently MTC packets are produced - see mtc
>> 295 above for how to determine if MTC packets are supported.
>> 296
>> 297 Valid values are given by:
>> 298
>> 299 /sys/bus/event_source/devices/intel_pt/caps/mtc_periods
>> 300
>> 301 which contains a hexadecimal value, the bits of which represent
>> 302 valid values e.g. bit 2 set means value 2 is valid.
>> 303
>> 304 The mtc_period value is converted to the MTC frequency as:
>> 305
>> 306 CTC-frequency / (2 ^ value)
>> 307
>> 308 e.g. value 3 means one eighth of CTC-frequency
>> 309
>> 310 Where CTC is the hardware crystal clock, the frequency of which
>> 311 can be related to TSC via values provided in cpuid leaf 0x15.
>> 312
>> 313 If an invalid value is entered, the error message
>> 314 will give a list of valid values e.g.
>> 315
>> 316 $ perf record -e intel_pt/mtc_period=15/u uname
>> 317 Invalid mtc_period for intel_pt. Valid values are: 0,3,6,9
>> 318
>> 319 The default value is 3 or the nearest lower value
>> 320 that is supported (0 is always supported).
>> 321
>> 322 cyc Produces CYC timing packets.
>> 323
>> 324 CYC packets provide even finer grain timestamp information than
>> 325 MTC and TSC packets. A CYC packet contains the number of CPU
>> 326 cycles since the last CYC packet. Unlike MTC and TSC packets,
>> 327 CYC packets are only sent when another packet is also sent.
>> 328
>> 329 Support for this feature is indicated by:
>> 330
>> 331 /sys/bus/event_source/devices/intel_pt/caps/psb_cyc
>> 332
>> 333 which contains "1" if the feature is supported and
>> 334 "0" otherwise.
>> 335
>> 336 The number of CYC packets produced can be reduced by specifying
>> 337 a threshold - see cyc_thresh below.
>> 338
>> 339 cyc_thresh Specifies how frequently CYC packets are produced - see cyc
>> 340 above for how to determine if CYC packets are supported.
>> 341
>> 342 Valid cyc_thresh values are given by:
>> 343
>> 344 /sys/bus/event_source/devices/intel_pt/caps/cycle_thresholds
>> 345
>> 346 which contains a hexadecimal value, the bits of which represent
>> 347 valid values e.g. bit 2 set means value 2 is valid.
>> 348
>> 349 The cyc_thresh value represents the minimum number of CPU cycles
>> 350 that must have passed before a CYC packet can be sent. The
>> 351 number of CPU cycles is:
>> 352
>> 353 2 ^ (value - 1)
>> 354
>> 355 e.g. value 4 means 8 CPU cycles must pass before a CYC packet
>> 356 can be sent. Note a CYC packet is still only sent when another
>> 357 packet is sent, not at, e.g. every 8 CPU cycles.
>> 358
>> 359 If an invalid value is entered, the error message
>> 360 will give a list of valid values e.g.
>> 361
>> 362 $ perf record -e intel_pt/cyc,cyc_thresh=15/u uname
>> 363 Invalid cyc_thresh for intel_pt. Valid values are: 0-12
>> 364
>> 365 CYC packets are not requested by default.
>> 366
>> 367
>> 368 new snapshot option
>> 369 -------------------
>> 370
>> 371 The difference between full trace and snapshot from the kernel's perspective is
>> 372 that in full trace we don't overwrite trace data that the user hasn't collected
>> 373 yet (and indicated that by advancing aux_tail), whereas in snapshot mode we let
>> 374 the trace run and overwrite older data in the buffer so that whenever something
>> 375 interesting happens, we can stop it and grab a snapshot of what was going on
>> 376 around that interesting moment.
>> 377
>> 378 To select snapshot mode a new option has been added:
>> 379
>> 380 -S
>> 381
>> 382 Optionally it can be followed by the snapshot size e.g.
>> 383
>> 384 -S0x100000
>> 385
>> 386 The default snapshot size is the auxtrace mmap size. If neither auxtrace mmap size
>> 387 nor snapshot size is specified, then the default is 4MiB for privileged users
>> 388 (or if /proc/sys/kernel/perf_event_paranoid < 0), 128KiB for unprivileged users.
>> 389 If an unprivileged user does not specify mmap pages, the mmap pages will be
>> 390 reduced as described in the 'new auxtrace mmap size option' section below.
>> 391
>> 392 The snapshot size is displayed if the option -vv is used e.g.
>> 393
>> 394 Intel PT snapshot size: %zu
>> 395
>> 396
>> 397 new auxtrace mmap size option
>> 398 ---------------------------
>> 399
>> 400 Intel PT buffer size is specified by an addition to the -m option e.g.
>> 401
>> 402 -m,16
>> 403
>> 404 selects a buffer size of 16 pages i.e. 64KiB.
>> 405
>> 406 Note that the existing functionality of -m is unchanged. The auxtrace mmap size
>> 407 is specified by the optional addition of a comma and the value.
>> 408
>> 409 The default auxtrace mmap size for Intel PT is 4MiB/page_size for privileged users
>> 410 (or if /proc/sys/kernel/perf_event_paranoid < 0), 128KiB for unprivileged users.
>> 411 If an unprivileged user does not specify mmap pages, the mmap pages will be
>> 412 reduced from the default 512KiB/page_size to 256KiB/page_size, otherwise the
>> 413 user is likely to get an error as they exceed their mlock limit (Max locked
>> 414 memory as shown in /proc/self/limits). Note that perf does not count the first
>> 415 512KiB (actually /proc/sys/kernel/perf_event_mlock_kb minus 1 page) per cpu
>> 416 against the mlock limit so an unprivileged user is allowed 512KiB per cpu plus
>> 417 their mlock limit (which defaults to 64KiB but is not multiplied by the number
>> 418 of cpus).
>> 419
>> 420 In full-trace mode, powers of two are allowed for buffer size, with a minimum
>> 421 size of 2 pages. In snapshot mode, it is the same but the minimum size is
>> 422 1 page.
>> 423
>> 424 The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g.
>> 425
>> 426 mmap length 528384
>> 427 auxtrace mmap length 4198400
>> 428
>> 429
>> 430 Intel PT modes of operation
>> 431 ---------------------------
>> 432
>> 433 Intel PT can be used in 2 modes:
>> 434 full-trace mode
>> 435 snapshot mode
>> 436
>> 437 Full-trace mode traces continuously e.g.
>> 438
>> 439 perf record -e intel_pt//u uname
>> 440
>> 441 Snapshot mode captures the available data when a signal is sent e.g.
>> 442
>> 443 perf record -v -e intel_pt//u -S ./loopy 1000000000 &
>> 444 [1] 11435
>> 445 kill -USR2 11435
>> 446 Recording AUX area tracing snapshot
>> 447
>> 448 Note that the signal sent is SIGUSR2.
>> 449 Note that "Recording AUX area tracing snapshot" is displayed because the -v
>> 450 option is used.
>> 451
>> 452 The 2 modes cannot be used together.
>> 453
>> 454
>> 455 Buffer handling
>> 456 ---------------
>> 457
>> 458 There may be buffer limitations (i.e. single ToPa entry) which means that actual
>> 459 buffer sizes are limited to powers of 2 up to 4MiB (MAX_ORDER). In order to
>> 460 provide other sizes, and in particular an arbitrarily large size, multiple
>> 461 buffers are logically concatenated. However an interrupt must be used to switch
>> 462 between buffers. That has two potential problems:
>> 463 a) the interrupt may not be handled in time so that the current buffer
>> 464 becomes full and some trace data is lost.
>> 465 b) the interrupts may slow the system and affect the performance
>> 466 results.
>> 467
>> 468 If trace data is lost, the driver sets 'truncated' in the PERF_RECORD_AUX event
>> 469 which the tools report as an error.
>> 470
>> 471 In full-trace mode, the driver waits for data to be copied out before allowing
>> 472 the (logical) buffer to wrap-around. If data is not copied out quickly enough,
>> 473 again 'truncated' is set in the PERF_RECORD_AUX event. If the driver has to
>> 474 wait, the intel_pt event gets disabled. Because it is difficult to know when
>> 475 that happens, perf tools always re-enable the intel_pt event after copying out
>> 476 data.
>> 477
>> 478
>> 479 Intel PT and build ids
>> 480 ----------------------
>> 481
>> 482 By default "perf record" post-processes the event stream to find all build ids
>> 483 for executables for all addresses sampled. Deliberately, Intel PT is not
>> 484 decoded for that purpose (it would take too long). Instead the build ids for
>> 485 all executables encountered (due to mmap, comm or task events) are included
>> 486 in the perf.data file.
>> 487
>> 488 To see buildids included in the perf.data file use the command:
>> 489
>> 490 perf buildid-list
>> 491
>> 492 If the perf.data file contains Intel PT data, that is the same as:
>> 493
>> 494 perf buildid-list --with-hits
>> 495
>> 496
>> 497 Snapshot mode and event disabling
>> 498 ---------------------------------
>> 499
>> 500 In order to make a snapshot, the intel_pt event is disabled using an IOCTL,
>> 501 namely PERF_EVENT_IOC_DISABLE. However doing that can also disable the
>> 502 collection of side-band information. In order to prevent that, a dummy
>> 503 software event has been introduced that permits tracking events (like mmaps) to
>> 504 continue to be recorded while intel_pt is disabled. That is important to ensure
>> 505 there is complete side-band information to allow the decoding of subsequent
>> 506 snapshots.
>> 507
>> 508 A test has been created for that. To find the test:
>> 509
>> 510 perf test list
>> 511 ...
>> 512 23: Test using a dummy software event to keep tracking
>> 513
>> 514 To run the test:
>> 515
>> 516 perf test 23
>> 517 23: Test using a dummy software event to keep tracking : Ok
>> 518
>> 519
>> 520 perf record modes (nothing new here)
>> 521 ------------------------------------
>> 522
>> 523 perf record essentially operates in one of three modes:
>> 524 per thread
>> 525 per cpu
>> 526 workload only
>> 527
>> 528 "per thread" mode is selected by -t or by --per-thread (with -p or -u or just a
>> 529 workload).
>> 530 "per cpu" is selected by -C or -a.
>> 531 "workload only" mode is selected by not using the other options but providing a
>> 532 command to run (i.e. the workload).
>> 533
>> 534 In per-thread mode an exact list of threads is traced. There is no inheritance.
>> 535 Each thread has its own event buffer.
>> 536
>> 537 In per-cpu mode all processes (or processes from the selected cgroup i.e. -G
>> 538 option, or processes selected with -p or -u) are traced. Each cpu has its own
>> 539 buffer. Inheritance is allowed.
>> 540
>> 541 In workload-only mode, the workload is traced but with per-cpu buffers.
>> 542 Inheritance is allowed. Note that you can now trace a workload in per-thread
>> 543 mode by using the --per-thread option.
>> 544
>> 545
>> 546 Privileged vs non-privileged users
>> 547 ----------------------------------
>> 548
>> 549 Unless /proc/sys/kernel/perf_event_paranoid is set to -1, unprivileged users
>> 550 have memory limits imposed upon them. That affects what buffer sizes they can
>> 551 have as outlined above.
>> 552
>> 553 Unless /proc/sys/kernel/perf_event_paranoid is set to -1, unprivileged users are
>> 554 not permitted to use tracepoints which means there is insufficient side-band
>> 555 information to decode Intel PT in per-cpu mode, and potentially workload-only
>> 556 mode too if the workload creates new processes.
>> 557
>> 558 Note also, that to use tracepoints, read-access to debugfs is required. So if
>> 559 debugfs is not mounted or the user does not have read-access, it will again not
>> 560 be possible to decode Intel PT in per-cpu mode.
>> 561
>> 562
>> 563 sched_switch tracepoint
>> 564 -----------------------
>> 565
>> 566 The sched_switch tracepoint is used to provide side-band data for Intel PT
>> 567 decoding. sched_switch events are automatically added. e.g. the second event
>> 568 shown below
>> 569
>> 570 $ perf record -vv -e intel_pt//u uname
>> 571 ------------------------------------------------------------
>> 572 perf_event_attr:
>> 573 type 6
>> 574 size 112
>> 575 config 0x400
>> 576 { sample_period, sample_freq } 1
>> 577 sample_type IP|TID|TIME|CPU|IDENTIFIER
>> 578 read_format ID
>> 579 disabled 1
>> 580 inherit 1
>> 581 exclude_kernel 1
>> 582 exclude_hv 1
>> 583 enable_on_exec 1
>> 584 sample_id_all 1
>> 585 ------------------------------------------------------------
>> 586 sys_perf_event_open: pid 31104 cpu 0 group_fd -1 flags 0x8
>> 587 sys_perf_event_open: pid 31104 cpu 1 group_fd -1 flags 0x8
>> 588 sys_perf_event_open: pid 31104 cpu 2 group_fd -1 flags 0x8
>> 589 sys_perf_event_open: pid 31104 cpu 3 group_fd -1 flags 0x8
>> 590 ------------------------------------------------------------
>> 591 perf_event_attr:
>> 592 type 2
>> 593 size 112
>> 594 config 0x108
>> 595 { sample_period, sample_freq } 1
>> 596 sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
>> 597 read_format ID
>> 598 inherit 1
>> 599 sample_id_all 1
>> 600 exclude_guest 1
>> 601 ------------------------------------------------------------
>> 602 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
>> 603 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8
>> 604 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8
>> 605 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8
>> 606 ------------------------------------------------------------
>> 607 perf_event_attr:
>> 608 type 1
>> 609 size 112
>> 610 config 0x9
>> 611 { sample_period, sample_freq } 1
>> 612 sample_type IP|TID|TIME|IDENTIFIER
>> 613 read_format ID
>> 614 disabled 1
>> 615 inherit 1
>> 616 exclude_kernel 1
>> 617 exclude_hv 1
>> 618 mmap 1
>> 619 comm 1
>> 620 enable_on_exec 1
>> 621 task 1
>> 622 sample_id_all 1
>> 623 mmap2 1
>> 624 comm_exec 1
>> 625 ------------------------------------------------------------
>> 626 sys_perf_event_open: pid 31104 cpu 0 group_fd -1 flags 0x8
>> 627 sys_perf_event_open: pid 31104 cpu 1 group_fd -1 flags 0x8
>> 628 sys_perf_event_open: pid 31104 cpu 2 group_fd -1 flags 0x8
>> 629 sys_perf_event_open: pid 31104 cpu 3 group_fd -1 flags 0x8
>> 630 mmap size 528384B
>> 631 AUX area mmap length 4194304
>> 632 perf event ring buffer mmapped per cpu
>> 633 Synthesizing auxtrace information
>> 634 Linux
>> 635 [ perf record: Woken up 1 times to write data ]
>> 636 [ perf record: Captured and wrote 0.042 MB perf.data ]
>> 637
>> 638 Note, the sched_switch event is only added if the user is permitted to use it
>> 639 and only in per-cpu mode.
>> 640
>> 641 Note also, the sched_switch event is only added if TSC packets are requested.
>> 642 That is because, in the absence of timing information, the sched_switch events
>> 643 cannot be matched against the Intel PT trace.
>> 644
>> 645
>> 646 perf script
>> 647 ===========
>> 648
>> 649 By default, perf script will decode trace data found in the perf.data file.
>> 650 This can be further controlled by new option --itrace.
>> 651
>> 652
>> 653 New --itrace option
>> 654 -------------------
>> 655
>> 656 Having no option is the same as
>> 657
>> 658 --itrace
>> 659
>> 660 which, in turn, is the same as
>> 661
>> 662 --itrace=ibxe
>> 663
>> 664 The letters are:
>> 665
>> 666 i synthesize "instructions" events
>> 667 b synthesize "branches" events
>> 668 x synthesize "transactions" events
>> 669 c synthesize branches events (calls only)
>> 670 r synthesize branches events (returns only)
>> 671 e synthesize tracing error events
>> 672 d create a debug log
>> 673 g synthesize a call chain (use with i or x)
>> 674 l synthesize last branch entries (use with i or x)
>> 675
>> 676 "Instructions" events look like they were recorded by "perf record -e
>> 677 instructions".
>> 678
>> 679 "Branches" events look like they were recorded by "perf record -e branches". "c"
>> 680 and "r" can be combined to get calls and returns.
>> 681
>> 682 "Transactions" events correspond to the start or end of transactions. The
>> 683 'flags' field can be used in perf script to determine whether the event is a
>> 684 tranasaction start, commit or abort.
>> 685
>> 686 Error events are new. They show where the decoder lost the trace. Error events
>> 687 are quite important. Users must know if what they are seeing is a complete
>> 688 picture or not.
>> 689
>> 690 The "d" option will cause the creation of a file "intel_pt.log" containing all
>> 691 decoded packets and instructions. Note that this option slows down the decoder
>> 692 and that the resulting file may be very large.
>> 693
>> 694 In addition, the period of the "instructions" event can be specified. e.g.
>> 695
>> 696 --itrace=i10us
>> 697
>> 698 sets the period to 10us i.e. one instruction sample is synthesized for each 10
>> 699 microseconds of trace. Alternatives to "us" are "ms" (milliseconds),
>> 700 "ns" (nanoseconds), "t" (TSC ticks) or "i" (instructions).
>> 701
>> 702 "ms", "us" and "ns" are converted to TSC ticks.
>> 703
>> 704 The timing information included with Intel PT does not give the time of every
>> 705 instruction. Consequently, for the purpose of sampling, the decoder estimates
>> 706 the time since the last timing packet based on 1 tick per instruction. The time
>> 707 on the sample is *not* adjusted and reflects the last known value of TSC.
>> 708
>> 709 For Intel PT, the default period is 100us.
>> 710
>> 711 Setting it to a zero period means "as often as possible".
>> 712
>> 713 In the case of Intel PT that is the same as a period of 1 and a unit of
>> 714 'instructions' (i.e. --itrace=i1i).
>> 715
>> 716 Also the call chain size (default 16, max. 1024) for instructions or
>> 717 transactions events can be specified. e.g.
>> 718
>> 719 --itrace=ig32
>> 720 --itrace=xg32
>> 721
>> 722 Also the number of last branch entries (default 64, max. 1024) for instructions or
>> 723 transactions events can be specified. e.g.
>> 724
>> 725 --itrace=il10
>> 726 --itrace=xl10
>> 727
>> 728 Note that last branch entries are cleared for each sample, so there is no overlap
>> 729 from one sample to the next.
>> 730
>> 731 To disable trace decoding entirely, use the option --no-itrace.
>> 732
>> 733
>> 734 dump option
>> 735 -----------
>> 736
>> 737 perf script has an option (-D) to "dump" the events i.e. display the binary
>> 738 data.
>> 739
>> 740 When -D is used, Intel PT packets are displayed. The packet decoder does not
>> 741 pay attention to PSB packets, but just decodes the bytes - so the packets seen
>> 742 by the actual decoder may not be identical in places where the data is corrupt.
>> 743 One example of that would be when the buffer-switching interrupt has been too
>> 744 slow, and the buffer has been filled completely. In that case, the last packet
>> 745 in the buffer might be truncated and immediately followed by a PSB as the trace
>> 746 continues in the next buffer.
>> 747
>> 748 To disable the display of Intel PT packets, combine the -D option with
>> 749 --no-itrace.
>> 750
>> 751
>> 752 perf report
>> 753 ===========
>> 754
>> 755 By default, perf report will decode trace data found in the perf.data file.
>> 756 This can be further controlled by new option --itrace exactly the same as
>> 757 perf script, with the exception that the default is --itrace=igxe.
>> 758
>> 759
>> 760 perf inject
>> 761 ===========
>> 762
>> 763 perf inject also accepts the --itrace option in which case tracing data is
>> 764 removed and replaced with the synthesized events. e.g.
>> 765
>> 766 perf inject --itrace -i perf.data -o perf.data.new
>> 767
>> 768 Below is an example of using Intel PT with autofdo. It requires autofdo
>> 769 (https://github.com/google/autofdo) and gcc version 5. The bubble
>> 770 sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial)
>> 771 amended to take the number of elements as a parameter.
>> 772
>> 773 $ gcc-5 -O3 sort.c -o sort_optimized
>> 774 $ ./sort_optimized 30000
>> 775 Bubble sorting array of 30000 elements
>> 776 2254 ms
>> 777
>> 778 $ cat ~/.perfconfig
>> 779 [intel-pt]
>> 780 mispred-all
>> 781
>> 782 $ perf record -e intel_pt//u ./sort 3000
>> 783 Bubble sorting array of 3000 elements
>> 784 58 ms
>> 785 [ perf record: Woken up 2 times to write data ]
>> 786 [ perf record: Captured and wrote 3.939 MB perf.data ]
>> 787 $ perf inject -i perf.data -o inj --itrace=i100usle --strip
>> 788 $ ./create_gcov --binary=./sort --profile=inj --gcov=sort.gcov -gcov_version=1
>> 789 $ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo
>> 790 $ ./sort_autofdo 30000
>> 791 Bubble sorting array of 30000 elements
>> 792 2155 ms
>> 793
>> 794 Note there is currently no advantage to using Intel PT instead of LBR, but
>> 795 that may change in the future if greater use is made of the data.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.