1 What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_invert 2 Date: October 2016 3 KernelVersion: 4.9 4 Contact: Peter Rosin <peda@axentia.se> 5 Description: 6 The DAC is used to find the peak level of an alternating 7 voltage input signal by a binary search using the output 8 of a comparator wired to an interrupt pin. Like so:: 9 10 _ 11 | \ 12 input +------>-------|+ \ 13 | \ 14 .-------. | }---. 15 | | | / | 16 | dac|-->--|- / | 17 | | |_/ | 18 | | | 19 | | | 20 | irq|------<-------' 21 | | 22 '-------' 23 24 The boolean invert attribute (0/1) should be set when the 25 input signal is centered around the maximum value of the 26 dac instead of zero. The envelope detector will search 27 from below in this case and will also invert the result. 28 29 The edge/level of the interrupt is also switched to its 30 opposite value. 31 32 What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_compare_interval 33 Date: October 2016 34 KernelVersion: 4.9 35 Contact: Peter Rosin <peda@axentia.se> 36 Description: 37 Number of milliseconds to wait for the comparator in each 38 step of the binary search for the input peak level. Needs 39 to relate to the frequency of the input signal.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.