1 What: /sys/bus/iio/devices/iio:deviceX/out_currentY_toggle_en 2 KernelVersion: 5.18 3 Contact: linux-iio@vger.kernel.org 4 Description: 5 Toggle enable. Write 1 to enable toggle or 0 to disable it. This 6 is useful when one wants to change the DAC output codes. For 7 autonomous toggling, the way it should be done is: 8 9 - disable toggle operation; 10 - change out_currentY_rawN, where N is the integer value of the symbol; 11 - enable toggle operation. 12 13 What: /sys/bus/iio/devices/iio:deviceX/out_currentY_rawN 14 KernelVersion: 5.18 15 Contact: linux-iio@vger.kernel.org 16 Description: 17 This attribute has the same meaning as out_currentY_raw. It is 18 specific to toggle enabled channels and refers to the DAC output 19 code in INPUT_N (_rawN), where N is the integer value of the symbol. 20 The same scale and offset as in out_currentY_raw applies. 21 22 What: /sys/bus/iio/devices/iio:deviceX/out_currentY_symbol 23 KernelVersion: 5.18 24 Contact: linux-iio@vger.kernel.org 25 Description: 26 Performs a SW switch to a predefined output symbol. This attribute 27 is specific to toggle enabled channels and allows switching between 28 multiple predefined symbols. Each symbol corresponds to a different 29 output, denoted as out_currentY_rawN, where N is the integer value 30 of the symbol. Writing an integer value N will select out_currentY_rawN. 31 32 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en 33 KernelVersion: 5.18 34 Contact: linux-iio@vger.kernel.org 35 Description: 36 Toggle enable. Write 1 to enable toggle or 0 to disable it. This 37 is useful when one wants to change the DAC output codes. For 38 autonomous toggling, the way it should be done is: 39 40 - disable toggle operation; 41 - change out_voltageY_rawN, where N is the integer value of the symbol; 42 - enable toggle operation. 43 44 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_rawN 45 KernelVersion: 5.18 46 Contact: linux-iio@vger.kernel.org 47 Description: 48 This attribute has the same meaning as out_currentY_raw. It is 49 specific to toggle enabled channels and refers to the DAC output 50 code in INPUT_N (_rawN), where N is the integer value of the symbol. 51 The same scale and offset as in out_currentY_raw applies. 52 53 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol 54 KernelVersion: 5.18 55 Contact: linux-iio@vger.kernel.org 56 Description: 57 Performs a SW switch to a predefined output symbol. This attribute 58 is specific to toggle enabled channels and allows switching between 59 multiple predefined symbols. Each symbol corresponds to a different 60 output, denoted as out_voltageY_rawN, where N is the integer value 61 of the symbol. Writing an integer value N will select out_voltageY_rawN.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.