1 What: /sys/bus/iio/devices/triggerX/master_mode_available 2 KernelVersion: 4.11 3 Contact: benjamin.gaignard@st.com 4 Description: 5 Reading returns the list possible master modes which are: 6 7 8 - "reset" 9 The UG bit from the TIMx_EGR register is 10 used as trigger output (TRGO). 11 - "enable" 12 The Counter Enable signal CNT_EN is used 13 as trigger output. 14 - "update" 15 The update event is selected as trigger output. 16 For instance a master timer can then be used 17 as a prescaler for a slave timer. 18 - "compare_pulse" 19 The trigger output send a positive pulse 20 when the CC1IF flag is to be set. 21 - "OC1REF" 22 OC1REF signal is used as trigger output. 23 - "OC2REF" 24 OC2REF signal is used as trigger output. 25 - "OC3REF" 26 OC3REF signal is used as trigger output. 27 - "OC4REF" 28 OC4REF signal is used as trigger output. 29 30 Additional modes (on TRGO2 only): 31 32 - "OC5REF" 33 OC5REF signal is used as trigger output. 34 - "OC6REF" 35 OC6REF signal is used as trigger output. 36 - "compare_pulse_OC4REF": 37 OC4REF rising or falling edges generate pulses. 38 - "compare_pulse_OC6REF": 39 OC6REF rising or falling edges generate pulses. 40 - "compare_pulse_OC4REF_r_or_OC6REF_r": 41 OC4REF or OC6REF rising edges generate pulses. 42 - "compare_pulse_OC4REF_r_or_OC6REF_f": 43 OC4REF rising or OC6REF falling edges generate 44 pulses. 45 - "compare_pulse_OC5REF_r_or_OC6REF_r": 46 OC5REF or OC6REF rising edges generate pulses. 47 - "compare_pulse_OC5REF_r_or_OC6REF_f": 48 OC5REF rising or OC6REF falling edges generate 49 pulses. 50 51 :: 52 53 +-----------+ +-------------+ +---------+ 54 | Prescaler +-> | Counter | +-> | Master | TRGO(2) 55 +-----------+ +--+--------+-+ |-> | Control +--> 56 | | || +---------+ 57 +--v--------+-+ OCxREF || +---------+ 58 | Chx compare +----------> | Output | ChX 59 +-----------+-+ | | Control +--> 60 . | | +---------+ 61 . | | . 62 +-----------v-+ OC6REF | . 63 | Ch6 compare +---------+> 64 +-------------+ 65 66 Example with: "compare_pulse_OC4REF_r_or_OC6REF_r":: 67 68 X 69 X X 70 X . . X 71 X . . X 72 X . . X 73 count X . . . . X 74 . . . . 75 . . . . 76 +---------------+ 77 OC4REF | . . | 78 +-+ . . +-+ 79 . +---+ . 80 OC6REF . | | . 81 +-------+ +-------+ 82 +-+ +-+ 83 TRGO2 | | | | 84 +-+ +---+ +---------+ 85 86 What: /sys/bus/iio/devices/triggerX/master_mode 87 KernelVersion: 4.11 88 Contact: benjamin.gaignard@st.com 89 Description: 90 Reading returns the current master modes. 91 Writing set the master mode 92 93 What: /sys/bus/iio/devices/iio:deviceX/in_count0_preset 94 KernelVersion: 4.12 95 Contact: benjamin.gaignard@st.com 96 Description: 97 Reading returns the current preset value. 98 Writing sets the preset value. 99 When counting up the counter starts from 0 and fires an 100 event when reach preset value. 101 When counting down the counter start from preset value 102 and fire event when reach 0. 103 104 What: /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available 105 KernelVersion: 4.12 106 Contact: benjamin.gaignard@st.com 107 Description: 108 Reading returns the list possible enable modes. 109 110 What: /sys/bus/iio/devices/iio:deviceX/in_count0_enable_mode 111 KernelVersion: 4.12 112 Contact: benjamin.gaignard@st.com 113 Description: 114 Configure the device counter enable modes, in all case 115 counting direction is set by in_count0_count_direction 116 attribute and the counter is clocked by the internal clock. 117 118 always: 119 Counter is always ON. 120 121 gated: 122 Counting is enabled when connected trigger signal 123 level is high else counting is disabled. 124 125 triggered: 126 Counting is enabled on rising edge of the connected 127 trigger, and remains enabled for the duration of this 128 selected mode. 129 130 What: /sys/bus/iio/devices/iio:deviceX/in_count_trigger_mode_available 131 KernelVersion: 4.13 132 Contact: benjamin.gaignard@st.com 133 Description: 134 Reading returns the list possible trigger modes. 135 136 What: /sys/bus/iio/devices/iio:deviceX/in_count0_trigger_mode 137 KernelVersion: 4.13 138 Contact: benjamin.gaignard@st.com 139 Description: 140 Configure the device counter trigger mode 141 counting direction is set by in_count0_count_direction 142 attribute and the counter is clocked by the connected trigger 143 rising edges.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.