1 ============== 2 CerfBoard/Cube 3 ============== 4 5 *** The StrongARM version of the CerfBoard/Cube has been discontinued *** 6 7 The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board 8 that measures approximately 2" square. It includes an Ethernet 9 controller, an RS232-compatible serial port, a USB function port, and 10 one CompactFlash+ slot on the back. Pictures can be found at the 11 Intrinsyc website, http://www.intrinsyc.com. 12 13 This document describes the support in the Linux kernel for the 14 Intrinsyc CerfBoard. 15 16 Supported in this version 17 ========================= 18 19 - CompactFlash+ slot (select PCMCIA in General Setup and any options 20 that may be required) 21 - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in 22 Network Devices) 23 - Serial ports with a serial console (hardcoded to 38400 8N1) 24 25 In order to get this kernel onto your Cerf, you need a server that runs 26 both BOOTP and TFTP. Detailed instructions should have come with your 27 evaluation kit on how to use the bootloader. This series of commands 28 will suffice:: 29 30 make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig 31 make ARCH=arm CROSS_COMPILE=arm-linux- zImage 32 make ARCH=arm CROSS_COMPILE=arm-linux- modules 33 cp arch/arm/boot/zImage <TFTP directory> 34 35 support@intrinsyc.com
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.