1 =================================== 2 DSCR (Data Stream Control Register) 3 =================================== 4 5 DSCR register in powerpc allows user to have some control of prefetch of data 6 stream in the processor. Please refer to the ISA documents or related manual 7 for more detailed information regarding how to use this DSCR to attain this 8 control of the prefetches . This document here provides an overview of kernel 9 support for DSCR, related kernel objects, its functionalities and exported 10 user interface. 11 12 (A) Data Structures: 13 14 (1) thread_struct:: 15 16 dscr /* Thread DSCR value */ 17 dscr_inherit /* Thread has changed default DSCR */ 18 19 (2) PACA:: 20 21 dscr_default /* per-CPU DSCR default value */ 22 23 (3) sysfs.c:: 24 25 dscr_default /* System DSCR default value */ 26 27 (B) Scheduler Changes: 28 29 Scheduler will write the per-CPU DSCR default which is stored in the 30 CPU's PACA value into the register if the thread has dscr_inherit value 31 cleared which means that it has not changed the default DSCR till now. 32 If the dscr_inherit value is set which means that it has changed the 33 default DSCR value, scheduler will write the changed value which will 34 now be contained in thread struct's dscr into the register instead of 35 the per-CPU default PACA based DSCR value. 36 37 NOTE: Please note here that the system wide global DSCR value never 38 gets used directly in the scheduler process context switch at all. 39 40 (C) SYSFS Interface: 41 42 - Global DSCR default: /sys/devices/system/cpu/dscr_default 43 - CPU specific DSCR default: /sys/devices/system/cpu/cpuN/dscr 44 45 Changing the global DSCR default in the sysfs will change all the CPU 46 specific DSCR defaults immediately in their PACA structures. Again if 47 the current process has the dscr_inherit clear, it also writes the new 48 value into every CPU's DSCR register right away and updates the current 49 thread's DSCR value as well. 50 51 Changing the CPU specific DSCR default value in the sysfs does exactly 52 the same thing as above but unlike the global one above, it just changes 53 stuff for that particular CPU instead for all the CPUs on the system. 54 55 (D) User Space Instructions: 56 57 The DSCR register can be accessed in the user space using any of these 58 two SPR numbers available for that purpose. 59 60 (1) Problem state SPR: 0x03 (Un-privileged, POWER8 only) 61 (2) Privileged state SPR: 0x11 (Privileged) 62 63 Accessing DSCR through privileged SPR number (0x11) from user space 64 works, as it is emulated following an illegal instruction exception 65 inside the kernel. Both mfspr and mtspr instructions are emulated. 66 67 Accessing DSCR through user level SPR (0x03) from user space will first 68 create a facility unavailable exception. Inside this exception handler 69 all mfspr instruction based read attempts will get emulated and returned 70 where as the first mtspr instruction based write attempts will enable 71 the DSCR facility for the next time around (both for read and write) by 72 setting DSCR facility in the FSCR register. 73 74 (E) Specifics about 'dscr_inherit': 75 76 The thread struct element 'dscr_inherit' represents whether the thread 77 in question has attempted and changed the DSCR itself using any of the 78 following methods. This element signifies whether the thread wants to 79 use the CPU default DSCR value or its own changed DSCR value in the 80 kernel. 81 82 (1) mtspr instruction (SPR number 0x03) 83 (2) mtspr instruction (SPR number 0x11) 84 (3) ptrace interface (Explicitly set user DSCR value) 85 86 Any child of the process created after this event in the process inherits 87 this same behaviour as well.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.