1 .. SPDX-License-Identifier: GPL-2.0 2 3 ============= 4 Kernel Stacks 5 ============= 6 7 Kernel stacks on x86-64 bit 8 =========================== 9 10 Most of the text from Keith Owens, hacked by AK 11 12 x86_64 page size (PAGE_SIZE) is 4K. 13 14 Like all other architectures, x86_64 has a kernel stack for every 15 active thread. These thread stacks are THREAD_SIZE (4*PAGE_SIZE) big. 16 These stacks contain useful data as long as a thread is alive or a 17 zombie. While the thread is in user space the kernel stack is empty 18 except for the thread_info structure at the bottom. 19 20 In addition to the per thread stacks, there are specialized stacks 21 associated with each CPU. These stacks are only used while the kernel 22 is in control on that CPU; when a CPU returns to user space the 23 specialized stacks contain no useful data. The main CPU stacks are: 24 25 * Interrupt stack. IRQ_STACK_SIZE 26 27 Used for external hardware interrupts. If this is the first external 28 hardware interrupt (i.e. not a nested hardware interrupt) then the 29 kernel switches from the current task to the interrupt stack. Like 30 the split thread and interrupt stacks on i386, this gives more room 31 for kernel interrupt processing without having to increase the size 32 of every per thread stack. 33 34 The interrupt stack is also used when processing a softirq. 35 36 Switching to the kernel interrupt stack is done by software based on a 37 per CPU interrupt nest counter. This is needed because x86-64 "IST" 38 hardware stacks cannot nest without races. 39 40 x86_64 also has a feature which is not available on i386, the ability 41 to automatically switch to a new stack for designated events such as 42 double fault or NMI, which makes it easier to handle these unusual 43 events on x86_64. This feature is called the Interrupt Stack Table 44 (IST). There can be up to 7 IST entries per CPU. The IST code is an 45 index into the Task State Segment (TSS). The IST entries in the TSS 46 point to dedicated stacks; each stack can be a different size. 47 48 An IST is selected by a non-zero value in the IST field of an 49 interrupt-gate descriptor. When an interrupt occurs and the hardware 50 loads such a descriptor, the hardware automatically sets the new stack 51 pointer based on the IST value, then invokes the interrupt handler. If 52 the interrupt came from user mode, then the interrupt handler prologue 53 will switch back to the per-thread stack. If software wants to allow 54 nested IST interrupts then the handler must adjust the IST values on 55 entry to and exit from the interrupt handler. (This is occasionally 56 done, e.g. for debug exceptions.) 57 58 Events with different IST codes (i.e. with different stacks) can be 59 nested. For example, a debug interrupt can safely be interrupted by an 60 NMI. arch/x86_64/kernel/entry.S::paranoidentry adjusts the stack 61 pointers on entry to and exit from all IST events, in theory allowing 62 IST events with the same code to be nested. However in most cases, the 63 stack size allocated to an IST assumes no nesting for the same code. 64 If that assumption is ever broken then the stacks will become corrupt. 65 66 The currently assigned IST stacks are: 67 68 * ESTACK_DF. EXCEPTION_STKSZ (PAGE_SIZE). 69 70 Used for interrupt 8 - Double Fault Exception (#DF). 71 72 Invoked when handling one exception causes another exception. Happens 73 when the kernel is very confused (e.g. kernel stack pointer corrupt). 74 Using a separate stack allows the kernel to recover from it well enough 75 in many cases to still output an oops. 76 77 * ESTACK_NMI. EXCEPTION_STKSZ (PAGE_SIZE). 78 79 Used for non-maskable interrupts (NMI). 80 81 NMI can be delivered at any time, including when the kernel is in the 82 middle of switching stacks. Using IST for NMI events avoids making 83 assumptions about the previous state of the kernel stack. 84 85 * ESTACK_DB. EXCEPTION_STKSZ (PAGE_SIZE). 86 87 Used for hardware debug interrupts (interrupt 1) and for software 88 debug interrupts (INT3). 89 90 When debugging a kernel, debug interrupts (both hardware and 91 software) can occur at any time. Using IST for these interrupts 92 avoids making assumptions about the previous state of the kernel 93 stack. 94 95 To handle nested #DB correctly there exist two instances of DB stacks. On 96 #DB entry the IST stackpointer for #DB is switched to the second instance 97 so a nested #DB starts from a clean stack. The nested #DB switches 98 the IST stackpointer to a guard hole to catch triple nesting. 99 100 * ESTACK_MCE. EXCEPTION_STKSZ (PAGE_SIZE). 101 102 Used for interrupt 18 - Machine Check Exception (#MC). 103 104 MCE can be delivered at any time, including when the kernel is in the 105 middle of switching stacks. Using IST for MCE events avoids making 106 assumptions about the previous state of the kernel stack. 107 108 For more details see the Intel IA32 or AMD AMD64 architecture manuals. 109 110 111 Printing backtraces on x86 112 ========================== 113 114 The question about the '?' preceding function names in an x86 stacktrace 115 keeps popping up, here's an indepth explanation. It helps if the reader 116 stares at print_context_stack() and the whole machinery in and around 117 arch/x86/kernel/dumpstack.c. 118 119 Adapted from Ingo's mail, Message-ID: <20150521101614.GA10889@gmail.com>: 120 121 We always scan the full kernel stack for return addresses stored on 122 the kernel stack(s) [1]_, from stack top to stack bottom, and print out 123 anything that 'looks like' a kernel text address. 124 125 If it fits into the frame pointer chain, we print it without a question 126 mark, knowing that it's part of the real backtrace. 127 128 If the address does not fit into our expected frame pointer chain we 129 still print it, but we print a '?'. It can mean two things: 130 131 - either the address is not part of the call chain: it's just stale 132 values on the kernel stack, from earlier function calls. This is 133 the common case. 134 135 - or it is part of the call chain, but the frame pointer was not set 136 up properly within the function, so we don't recognize it. 137 138 This way we will always print out the real call chain (plus a few more 139 entries), regardless of whether the frame pointer was set up correctly 140 or not - but in most cases we'll get the call chain right as well. The 141 entries printed are strictly in stack order, so you can deduce more 142 information from that as well. 143 144 The most important property of this method is that we _never_ lose 145 information: we always strive to print _all_ addresses on the stack(s) 146 that look like kernel text addresses, so if debug information is wrong, 147 we still print out the real call chain as well - just with more question 148 marks than ideal. 149 150 .. [1] For things like IRQ and IST stacks, we also scan those stacks, in 151 the right order, and try to cross from one stack into another 152 reconstructing the call chain. This works most of the time.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.