1 Binding for Texas Instruments autoidle clock.
2
3 This binding uses the common clock binding[1]. It assumes a register mapped
4 clock which can be put to idle automatically by hardware based on the usage
5 and a configuration bit setting. Autoidle clock is never an individual
6 clock, it is always a derivative of some basic clock like a gate, divider,
7 or fixed-factor.
8
9 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
10
11 Required properties:
12 - reg : offset for the register controlling the autoidle
13 - ti,autoidle-shift : bit shift of the autoidle enable bit
14 - ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
15
16 Examples:
17 dpll_core_m4_ck: dpll_core_m4_ck {
18 #clock-cells = <0>;
19 compatible = "ti,divider-clock";
20 clocks = <&dpll_core_x2_ck>;
21 ti,max-div = <31>;
22 ti,autoidle-shift = <8>;
23 reg = <0x2d38>;
24 ti,index-starts-at-one;
25 ti,invert-autoidle-bit;
26 };
27
28 dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
29 #clock-cells = <0>;
30 compatible = "ti,fixed-factor-clock";
31 clocks = <&dpll_usb_ck>;
32 ti,clock-div = <1>;
33 ti,autoidle-shift = <8>;
34 reg = <0x01b4>;
35 ti,clock-mult = <1>;
36 ti,invert-autoidle-bit;
37 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.